Design and application of metal-organic frameworks and derivatives as heterogeneous Fenton-like catalysts for organic wastewater treatment: A review

A new strategy to construct MOF-on-MOF derivatives for the removal of tetracycline hydrochloride from water by activation of peroxymonosulfate

A MOF-on-MOF composite derivative material named ZIF-67@Ce-MOF-600 was designed and synthesized. The preparation of ZIF-67@Ce-MOF-600 was optimized from the aspects of the ratio of metal and ligand, heat-treatment temperature. It was demonstrated by XRD, FT-IR, SEM-EDS and TEM. The optimum conditions for the activation of PMS by ZIF-67@Ce-MOF-600 for the degradation of tetracycline (TC) were investigated by adjusting the catalyst dosage, TC, pH, peoxymonosulfate (PMS) concentration, and different kinds of water, co-existing anions and pollution. Under optimal conditions (20 mg catalysts and 50 mg PMS added) in 100 mL of tetracyclines (TC) solvent (20 mg TC/L), the removal rate could reach up to 99.2% and after five cycles was 70.5%. The EPR results indicated the presence of free radicals and non-free radical, among which free radicals intended to play a major role in the degradation process. Its possible degradation pathways and attack sites were analyzed by liquid-phase mass spectrometry and DFT analysis.

From nano- to macroarchitectures: designing and constructing MOF-derived porous materials for persulfate-based advanced oxidation processes

Persulfate-based advanced oxidation processes (PS-AOPs) have gained significant attention as an effective approach for the elimination of emerging organic contaminants (EOCs) in water treatment. Metal-organic frameworks (MOFs) and their derivatives are regarded as promising catalysts for activating peroxydisulfate (PDS) and peroxymonosulfate (PMS) due to their tunable and diverse structure and composition. By the rational nanoarchitectured design of MOF-derived nanomaterials, the excellent performance and customized functions can be achieved. However, the intrinsic fine powder form and agglomeration ability of MOF-derived nanomaterials have limited their practical engineering application. Recently, a great deal of effort has been put into shaping MOFs into macroscopic objects without sacrificing the performance. This review presents recent advances in the design and synthetic strategies of MOF-derived nano- and macroarchitectures for PS-AOPs to degrade EOCs. Firstly, the strategies of preparing MOF-derived diverse nanoarchitectures including hierarchically porous, hollow, yolk-shell, and multi-shell structures are comprehensively summarized. Subsequently, the approaches of manufacturing MOF-based macroarchitectures are introduced in detail. Moreover, the PS-AOP application and mechanisms of MOF-derived nano- and macromaterials as catalysts to eliminate EOCs are discussed. Finally, the prospects and challenges of MOF-derived materials in PS-AOPs are discussed. This work will hopefully guide the design and development of MOF-derived porous materials in SR-AOPs.

Coordination of iron ions with phycocyanin for an improved Fenton activity at weakly acidic pH

Development of biomolecules coordinated iron ions-based Fenton agents is highly desirable for chemodynamic therapy in term of demanded biocompatibility and enhanced Fenton activity at tumor microenvironmental pH of 6.5. Herein, phycocyanin (PC), the only FDA-approved natural coloring agent, was selected to coordinate with iron ions. The spectroscopic investigations disclosed that PC displayed pH-dependent spectral and conformational responses upon addition of Fe ions. As a result, the effective formation of Fe-PC coordination merely occurred at pH 7 due to a less folded polypeptide matrix of PC. The formed Fe-PC coordination exerted an enhanced Fenton activity at pH 6.5 as attested by 3, 3', 5, 5'-tetramethlbenzidine assay and steady-state kinetic analysis. These findings not only provide fundamental insights of Fe-PC coordination but also highlight the potential biomedical significance of Fe-PC for severing as an effective Fenton agent in chemodynamic therapy.

The correlation between electron exchange capacity of Fenton-like heterogeneous catalyst and catalytic activity

Electron transfer played key role in peroxymonosulfate (PMS) activation for heterogeneous Fenton-like catalysts (HFCs). However, the relationship between electron exchange capacity (EEC) and catalytic activity of HFCs has not been elucidated. Herein, thirteen HFCs reported in our previous studies were selected to measure their EEC via electrochemical methods and to investigate the correlation between EEC and catalytic activity for PMS. The results show that nitrogen-doped graphene oxide had much higher EEC (5.299 mM(e) g-1), followed by reduced graphene oxide (3.23 mM(e) g-1), nitrogen-doped biochar-700 (2.032 mM(e) g-1), graphene oxdie (1.789 mM(e) g-1), nitrogen-doped biochar-300 (1.15 mM(e) g-1), g-C3N4 (0.752 mM(e) g-1) and biochar (0.351 mM(e) g-1). For carbon materials, their catalytic activity was not determined by electron donor capacity (EDC), electron acceptor capacity (EAC) and EEC (EDC + EAC), but was linear correlation with |EDC-EAC| that can characterize the extent of HFCs reacting with PMS. The higher the |EDC-EAC| is, the higher the catalytic activity of HFCs is. For carbonaceous materials, their catalytic activity was not proportional to EAC, but had good linear correlation with EDC and |EDC-EAC|. The discrepancy between carbon materials and carbonaceous materials could be due to the different activation mechanisms. Further analysis found that there was no correlation between EEC and the reactive species derived from PMS, indicating that the produced reactive species was not only controlled by EEC. This study firstly elucidated the correlation between EEC and catalytic activity of HFCs, and |EDC-EAC| could be used as an index for evaluating the catalytic activity of HFCs.

Multivalent iron-based magnetic porous biochar from peach gum polysaccharide as a heterogeneous Fenton catalyst for degradation of dye pollutants

Water contamination caused by organic dyes has become a significant concern, and catalytic degradation of dye pollutants is an effective solution. However, developing an affordable, easy-to-prepare, high-catalytic-activity, and renewable catalyst has proved challenging. The current study addresses this issue by introducing an efficient heterogeneous Fenton catalyst, known as multivalent iron-based magnetic porous biochar (mFe-MPB). This catalyst comprises multiple iron species, such as Fe3O4, γ-Fe2O3, zero-valent Fe (Fe0), and Fe3C. The mFe-MPB was easily prepared by utilizing a straightforward crosslinking-pyrolysis strategy with natural peach gum polysaccharide (PGP), which has a unique structure and composition that facilitates the creation of multivalent iron species. The mFe-MPB demonstrates high catalytic activity in the degradation of an array of dyes, including cationic dyes such as methylene blue (MB) and methyl violet (MV), as well as anionic new coccine (NC) dye. Its mass standardized rate constant value for catalytic degradation of MB can reach as high as 1.65 L min-1 g-1. Additionally, the catalyst can be easily recovered through magnetic separation and possesses remarkable structural stability, enabling several reuses without compromising its efficiency. Therefore, this study offers a viable strategy to fabricate low-cost, efficient and sustainable Fenton catalyst for removal of dye pollutants from water.

Research progress of MOF-based membrane reactor coupled with AOP technology for organic wastewater treatment

MOF-based catalytic membrane reactor (MCMR), which can simultaneously achieve membrane separation and chemical catalytic degradation in an integrated system, is a cutting-edge technology for effective treatment of organic pollutants in water. The coupling of MCMR and advanced oxidation process (AOP) not only significantly improves the pollutant removal efficiency but also inhibits the membrane pollution through self-cleaning effect, thus improving the stability of MCMR. This paper reviews different MCMR systems combined with photocatalysis, Fenton oxidation, and persulfate activation, elucidates the reaction mechanism, discusses key issues to improve system effectiveness, and suggests future challenges and research directions.

Single-atom Mo-Co catalyst with low biotoxicity for sustainable degradation of high-ionization-potential organic pollutants

Single-atom catalysts (SACs) are a promising area in environmental catalysis. We report on a bimetallic Co-Mo SAC that shows excellent performance in activating peroxymonosulfate (PMS) for sustainable degradation of organic pollutants with high ionization potential (IP > 8.5 eV). Density Functional Theory (DFT) calculations and experimental tests demonstrate that the Mo sites in Mo-Co SACs play a critical role in conducting electrons from organic pollutants to Co sites, leading to a 19.4-fold increase in the degradation rate of phenol compared to the CoCl2-PMS group. The bimetallic SACs exhibit excellent catalytic performance even under extreme conditions and show long-term activation in 10-d experiments, efficiently degrading 600 mg/L of phenol. Moreover, the catalyst has negligible toxicity toward MDA-MB-231, Hela, and MCF-7 cells, making it an environmentally friendly option for sustainable water treatment. Our findings have important implications for the design of efficient SACs for environmental remediation and other applications in biology and medicine.

Surface engineering of Al2O3 nanotubes by ureasolysis method for activating persulfate degradation of antibiotics

Though ecofriendly, pure Al₂O₃ has never been used for activation of peroxodisulfate (PDS) to degrade pollutants. We report the fabrication of Al₂O₃ nanotubes by ureasolysis method for efficient activating PDS degradation of antibiotics. The fast ureasolysis in aqueous AlCl₃ solution produces NH₄Al(OH)₂CO₃ nanotubes, which are calcined to porous Al₂O₃ nanotubes, and the release of ammonia and carbon dioxide engineers the surface features of large surface area, numerous acidic-basic sites and suitable Zeta potentials. The synergy of these features facilitates the adsorption of the typical antibiotics ciprofloxacin and PDS activation, which is proved by experiment results and density functional theory simulation. The proposed Al₂O₃ nanotubes can catalyze 92-96% degradation of 10 ppm ciprofloxacin within 40 min, with chemical oxygen demand removal of 65-66% in aqueous, and 40-47% in whole including aqueous and catalysts. Ciprofloxacin at high concentration, other fluoroquinolones and tetracycline can also be effectively degraded. These data demonstrate the Al₂O₃ nanotubes prepared by the nature-inspired ureasolysis method has unique features and great potentials for antibiotics degradation.

Turning precious metal-loaded e-waste to useful catalysts: Investigation into supercilious recovery and catalyst viability for peroxymonosulfate activation

Here, the key tasks to be accomplished are selective precious metal recovery from e-wastewater and their conversion into valuable catalysts for peroxymonosulfate (PMS) activation. In this regard, we developed a hybrid material using 3D functional graphene foam and copper para-phenylenedithol (Cu-pPDT) MOF. The prepared hybrid showed a supercilious recovery of 92-95% even up to five cycles for Au(III) and Pd(II), which can be viewed as a reference for both the 2D graphene and the MOFs family. The outstanding performance has been attributed principally to the impact of diverse functionality as well as the unique morphology of 3D graphene foam, which provided a wide range of surface area and additional active sites in the hybrid frameworks. To prepare the surface-loaded metal nanoparticle catalysts, the sorbed samples recovered after precious metal extraction were calcined at 800 °C. The viability of the developed catalysts for the breakdown of 4-nitrophenol (4-NP) via PMS activation was investigated. Electron paramagnetic resonance spectroscopy (EPR) and experiments with radical scavengers suggest that sulfate and hydroxyl radicals are the main reactive species involved in the breakdown of 4-NP. This is because the active graphitic carbon matrix and the exposed precious metal and copper active sites work together in a way that is more effective.

Fundamental Perspectives on the Electrochemical Water Applications of Metal-Organic Frameworks

HIGHLIGHTS

The recent development and implementation of metal-organic frameworks (MOFs) and MOF-based materials in electrochemical water applications are reviewed. The critical factors that affect the performances of MOFs in the electrochemical reactions, sensing, and separations are highlighted. Advanced tools, such as pair distribution function analysis, are playing critical roles in unraveling the functioning mechanisms, including local structures and nanoconfined interactions. Metal-organic frameworks (MOFs), a family of highly porous materials possessing huge surface areas and feasible chemical tunability, are emerging as critical functional materials to solve the growing challenges associated with energy-water systems, such as water scarcity issues. In this contribution, the roles of MOFs are highlighted in electrochemical-based water applications (i.e., reactions, sensing, and separations), where MOF-based functional materials exhibit outstanding performances in detecting/removing pollutants, recovering resources, and harvesting energies from different water sources. Compared with the pristine MOFs, the efficiency and/or selectivity can be further enhanced via rational structural modulation of MOFs (e.g., partial metal substitution) or integration of MOFs with other functional materials (e.g., metal clusters and reduced graphene oxide). Several key factors/properties that affect the performances of MOF-based materials are also reviewed, including electronic structures, nanoconfined effects, stability, conductivity, and atomic structures. The advancement in the fundamental understanding of these key factors is expected to shed light on the functioning mechanisms of MOFs (e.g., charge transfer pathways and guest-host interactions), which will subsequently accelerate the integration of precisely designed MOFs into electrochemical architectures to achieve highly effective water remediation with optimized selectivity and long-term stability.

The performance and mechanism of iron-mediated chemical oxidation: Advances in hydrogen peroxide, persulfate and percarbonate oxidation

Many studies have successfully built iron-mediated materials to activate or catalyze Fenton-like reactions, with applications in water and wastewater treatment being investigated. However, the developed materials are rarely compared with each other regarding their performance of organic contaminant removal. In this review, the recent advances of Fenton-like processes in homogeneous and heterogeneous ways are summarized, especially the performance and mechanism of activators including ferrous iron, zero valent iron, iron oxides, iron-loaded carbon, zeolite, and metal organic framework materials. Also, this work mainly compares three O-O bond containing oxidants including hydrogen dioxide, persulfate, and percarbonate, which are environmental-friendly oxidants and feasible for in-situ chemical oxidation. The influence of reaction conditions, catalyst properties and benefits are analyzed and compared. In addition, the challenges and strategies of these oxidants in applications and the major mechanisms of the oxidation process have been discussed. This work can help understand the mechanistic insights of variable Fenton-like reactions, the role of emerging iron-based materials, and provide guidance for choosing appropriate technologies when facing real-world water and wastewater applications.

Ag3PO4-anchored La2Ti2O7 nanorod as a Z-Scheme heterostructure composite with boosted photogenerated carrier separation and enhanced photocatalytic performance under natural sunlight

Developing wide spectra-responsive photocatalysts has attracted considerable attention in the photocatalytic technology to achieve excellent catalytic activity. Ag₃PO₄, with strong response to light spectra shorter than 530 nm, shows extremely outstanding photocatalytic oxidation ability. Unfortunately, the photocorrosion of Ag₃PO₄ is still the biggest obstacle to its application. Herein, the La₂Ti₂O₇ nanorod was used to anchor Ag₃PO₄ nanoparticles in this study, and a novel Z-Scheme La₂Ti₂O₇/Ag₃PO₄ heterostructure composite was constructed. Remarkably, the composite showed strong responsive to most of the spectra in natural sunlight. The Ag⁰ formed in-situ acted as the recombination center of photogenerated carriers, which promoted their efficient separation and contributed to the improved photocatalytic performance of the heterostructure. When the mass ratio of Ag₃PO₄ in the La₂Ti₂O₇/Ag₃PO₄ catalyst was 50%, the degradation rate constant of Rhodamine B (RhB), methyl orange (MO), chloroquine phosphate (CQ), tetracycline (TC), and phenol under natural sunlight irradiation were 0.5923, 0.4463, 0.1399, 0.0493, and 0.0096 min^-1, respectively. Furthermore, the photocorrosion of the composite was greatly inhibited, 76.49% of CQ and 83.96% of RhB were still degraded after four cycles. Besides, the holes and O₂^•- played a significant role in RhB degradation, and it included multiple mechanisms of deethylation, deamination, decarboxylation, and cleavage of ring-structures. Moreover, the treated solution can also show safety to the water receiving environment. Overall, the synthesized Z-Scheme La₂Ti₂O₇/Ag₃PO₄ composite exhibited immense potential for removing various organic pollutants through photocatalytic technology under natural sunlight irradiation.

Recent advances of metal-organic framework-based and derivative materials in the heterogeneous catalytic removal of volatile organic compounds

Since the environmental hazards of volatile organic compounds (VOCs) are well known, heterogeneous catalysis has become one of the most popular methods to treat VOCs due to its environmental friendliness and simplicity of operation. Although a large number of reports have reviewed the application of catalytic oxidation for the degradation of VOCs, relatively few reports are based on this direction of metal organic frameworks (MOFs) and MOF derivatives. Herein, this paper reviews the recent applications of heterogeneous catalytic technologies in the degradation of VOCs, including photocatalysis, thermal catalysis and other catalytic approaches. The applications of MOFs and their derivatives in VOCs degradation, such as the progress of MOF-derived metal oxides in the treatment of toluene, were highlighted. The mechanisms of VOCs degradation by different catalytic approaches were systematically presented. Finally, we presented the views and directions of VOCs treatment technology development. We hope that this reaction type-oriented review will provide important insights into MOFs and MOF-derived materials for VOCs pollution control.

Nanoconfinement-enhanced Fenton-like polymerization via hollow hetero-shell carbon for reducing carbon emissions in organic wastewater purification

Lower reaction speed and excessive oxidant inputs impede the removal of contaminants from water via the advanced oxidation processes based on peroxymonosulfate. Herein, we report a new confined catalysis paradigm via the hollow hetero-shell structured CN@C (H-CN@C), which permits effective decontamination through polymerization with faster reaction rates and lower oxidant dosage. The confined space structures regulated the CN and CO and electron density of the inner shell, which increased the electron transfer rate and mass transfer rate. As a result, CN in H-CN@C-10 reacted with peroxymonosulfate in preference to CO to generate singlet oxygen, improving the second-order reaction kinetics by 503 times. The identification of oxidation products implied that bisphenol AF could effectively remove by polymerization, which could reduce carbon dioxide emissions. These favorable properties make the nanoconfined catalytic polymerization of contaminants a remarkably promising nanocatalytic water purification technology.

Three-dimensional structured electrode for electrocatalytic organic wastewater purification: Design, mechanism and role

Considering the growing need in decentralized water treatment, the application of electrocatalytic processes (EP) to achieve organic wastewater purification will be dominant in the near future due to high efficiency, small reactor assembly as well as the flexibility of operation and management. The catalytic performance of electrode materials determines the development of this technology. Among them, the unique three-dimensional (3D) structure electrode shows better performance than two-dimensional (2D) electrode in increasing mass transfer, enhancing adsorption and exposing more active sites. Hence, this review starts with the introduction of definition, classification, advantages and disadvantages of 3D electrode materials. Then a critical discussion on the design and construction of 3D electrode materials for organic wastewater purification application is provided. Next, the removal mechanism of organic pollutants on the surface of 3D electrode, the role of 3D structure, the design of reactor with 3D electrode, the conversion and toxicity of degradation products, electrode energy efficiency, stability and cost, are comprehensively reviewed. At last, current challenges and future perspectives for the development of 3D electrode materials are addressed. We deem that this review will provide a valuable insight into the design and application of 3D electrodes in environmental water purification.

Defective iron based metal-organic frameworks derived from zero-valent iron for highly efficient fenton-like catalysis

Introducing crystal defects into iron based metal-organic frameworks (Fe-MOFs) is regarded as a promising strategy to enhance Fenton-like performance. However, developing a facile and effective strategy to construct defective Fe-MOFs as highly efficient Fenton-like catalyst is still a challenge. Herein, MIL-100(Fe) (Def-MIL-100(Fe)) with missing ligands defects was synthesized by a simple heterogeneous reaction using zero-valent iron. The bisphenol A degradation efficiency in the Def-MIL-100(Fe)/H₂O₂ system reached up to 91.26% within 10 min at pH 4 with a low catalyst dosage of 0.05 g/L, while the perfect MIL-100(Fe) has almost no Fenton-like performance. It was observed that missing ligands defects in the Def-MIL-100(Fe) play a key role in the Fenton-like reaction. The missing ligands defects could increase the Lewis acidity for fast H₂O₂ adsorption and accelerate the electron transfer between Fe^II and Fe^III cycling, leading to faster and more·OH generation. Moreover, the missing ligands defects could promote the mass transfer for improving·OH utilization efficiency. This work provides a novel strategy to construct defective Fe-MOFs as highly efficient Fenton-like catalyst to degrade organic pollutants in water.

Advanced oxidation process: a sustainable technology for treating refractory organic compounds present in industrial wastewater

The world faces tremendous challenges and environmental crises due to the rising strength of wastewater. The conventional technologies fail to achieve the quality water that can be reused after treatment means "zero effluent" discharge of the industrial effluent. Therefore, now the key challenge is to develop improved technologies which will have no contribution to secondary pollution and at the same time more efficient for the socio-economic growth of the environment. Sustainable technologies are needed for wastewater treatment, reducing footprint by recycling, reusing, and recovering resources. Advanced oxidation process (AOP) is one of the sustainable emerging technologies for treating refractory organic contaminants present in different industrial wastewaters like textile, paper and pulp, pharmaceuticals, petrochemicals, and refineries. This critical review emerges details of advanced oxidation processes (AOPs), mentioning all possible permutations and combinations of components like ozone, UV, the catalyst used in the process. Non-conventional AOP systems, microwave, ultrasound, and plasma pulse assisted are the future of the oxidation process. This review aims to enlighten the role of AOPs for the mineralization of refractory organic contaminants (ROC) to readily biodegradable organics that cannot be either possible by conventional treatment. The integrated AOPs can improve the biodegradability of recalcitrant organic compounds and reduce the toxicity of wastewater, making them suitable for further biological treatment.

Boosting generation of reactive oxygen and chlorine species on TNT photoanode and Ni/graphite fiber cathode towards efficient oxidation of ammonia wastewater

Photoelectrocatalytic (PEC) process combining the merits of photocatalysis and electrocatalysis is considered as a promising ammonia oxidation technology for water treatment. However, some key issues, such as the limited in situ generation of oxidants on photoanode, slow mass transfer problem and generation of nitrate/nitrite by-products hinder the further application of PEC process in the treatment of ammonia pollutant. In this study, the graphite felt (GF) cathodes modified by different transition metals (Ni, Fe, Mn, Co, Cu) were screened by physicochemical and photoelectrochemical characterizations. The results show that the Ni-GF cathode with more Ni⁰ uniformly distributed on the GF surface had the best electrocatalytic activity to generate H₂O₂. The PEC system composed of 10.0 wt% Ni-GF cathode and optimized titania nanotubes (TNTs) photoanode selectively converted about 96.1% ammonia to N₂ within 90 min. Compared with the single TNTs photoanode system, the ammonia oxidation reaction rate constant of the synergistic PEC oxidation system was increased by about two times, which demonstrated the role of the oxidants simultaneously generated on both anode and cathode. The in situ generated reactive oxygen-based oxidants and chlorine-based oxidants interacted together, and ClO• acted a leading role in the ammonia oxidation which were confirmed by quenching and probe experiments. In addition, the contributions of •OH and ClO• were significantly improved in the synergistic PEC oxidation system, compared with the single TNTs photoanode system. Furthermore, the nitrate by-products generated by the ammonia oxidation were further reduced on the Ni-GF cathode. The large amount of active chlorine and active oxygen generated on the electrode diffused into the bulk, effectively overcoming the mass transfer limitation of direct oxidation. Therefore, the developed TNTs photoanode/Ni-GF cathode system can continuously and efficiently convert ammonia to N₂ without the formation of nitrate/nitrite by-products.

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Metabolic pathways reveal the effect of fungicide loaded metal-organic frameworks on the growth of wheat seedlings

Metal-organic frameworks (MOF) are an emerging class of hybrid inorganic-organic porous materials used in various fields, especially in molecule delivery system. As iron is an essential micronutrient for plant growth, iron-based MOF (Fe-MOF) is developed for agricultural application as fungicide carriers. However, fungicides may have various effect on the plant growth, which may be different from Fe-MOF. When they are combined with the carriers, the effects on target plants will change. In this work, tebuconazole-loaded Fe-MOF was prepared and used to treat wheat seedlings. The physiological, biochemical and metabolic levels of wheat roots and shoots were shown by a comparative study. Related metabolic pathways were analyzed by non-targeted metabolomic method. Many metabolites in wheat roots and shoots showed an upward trend after Fe-MOF treatment, but tebuconazole had a negative impact on these indicators. Related metabolic pathways in Fe-MOF and tebuconazole treatment were different, and the related pathway of tebuconazole-loaded Fe-MOF was closer to that of Fe-MOF. The metabolic pathways study revealed that the negative impact from tebuconazole was mitigated when wheat seedlings were treated with tebuconazole-loaded Fe-MOF. This research firstly explores the mechanism of MOF as carriers to help plant reduce the negative effects from fungicide by regulating metabolic pathways.

Efficient ofloxacin degradation via photo-Fenton process over eco-friendly MIL-88A(Fe): Performance, degradation pathways, intermediate library establishment and toxicity evaluation

The high-throughput production of the eco-friendly MIL-88A(Fe) was achieved under mild reaction conditions with normal pressure and temperature. The as-prepared MIL-88A(Fe) exhibited efficient photo-Fenton catalytic ofloxacin (OFL) degradation upon visible light irradiation with good stability and reusability. The OFL (20.0 mg/L) was completely degraded within 50 min under visible light with the aid of MIL-88A(Fe) (0.25 g/L) and H₂O₂ (1.0 mL/L) in aqueous solution (pH = 7.0). The hydroxyl radicals (·OH) are the main active species during the photo-Fenton oxidation process. Meanwhile, the degradation intermediates and the corresponding degradation pathways were identified and proposed with the aid of both ultra-high performance liquid chromatography tandem quadrupole time-of-flight mass spectrometry (UHPLC-Q-TOF-MS) and density functional theory (DFT) calculations. Finally, the degradation product library was firstly established to identify intermediate transformation products (TPs) with their variation of concentration, and their corresponding toxicologic activities were assessed via Toxtree and T.E.S.T software as well. Finally, the MIL-88A is efficient and stable with four cycles' catalysis operations, demonstrating good potential for water treatment.

Layer-by-layer coating of MIL-100(Fe) on a cotton fabric for purification of water-soluble dyes by the combined effect of adsorption and photocatalytic degradation

Efforts have been made for sustainable development of adsorbents to purify organic contaminants from wastewater. In this study, a MIL-100(Fe) based textile that acts as a reusable adsorbent and photocatalytic agent was developed by synthesizing MIL-100(Fe) onto a cotton fabric by the layer-by-layer (LBL) process using water-based solutions. As the number of LBL cycles increased, the add-on's of MIL-100(Fe) showed a drastic increase up to 8 cycles, then showed gradual increases with further treatments. The overall adsorption performance was enhanced with the increased MIL-100(Fe) add-on's, but the specific adsorption efficiency per unit mass of MIL-100(Fe) was reduced as the LBL cycles increased, implying the reduced average adsorption efficiency with a thicker coating. To examine the reusability of the adsorbent, desorption efficiency of RhB was measured. The desorption after the first-time adsorption was not efficient due to the strong binding inside the pores. For the later cycles of adsorption–desorption, desorption occurred more efficiently, probably because RhB molecules were adhered mostly at the outer surface of the MOF layer. Simultaneously, MIL-100(Fe)@cotton demonstrated the photocatalytic degradation performance against RhB in the presence of H₂O₂ by the Fenton reaction. With the combined effect of adsorption and photodegradation, the developed fabric attained 96% removal efficiency for RhB dissolved in water. This study demonstrates an environmentally responsible process of developing a MIL-100(Fe) coated fabric that is readily available for effective removal of organic foulants in water. This fabrication method can be applied as a scalable manufacturing of metal–organic framework-based photocatalytic adsorbent textiles.

A MIL-100(Fe)-based water purifying textile that functions by dual action of adsorption and photocatalytic activity is designed via a layer-by-layer process without using toxic organic solvents.

Recent advances on inactivation of waterborne pathogenic microorganisms by (photo) electrochemical oxidation processes: Design and application strategies

Compared with other conventional water disinfection processes, (photo) electrochemical oxidation (P/ECO) processes have the characteristics of environmental friendliness, convenient installation and operation, easy control and high efficiency of inactivating waterborne pathogenic microorganisms (PMs), so that more and more research work has been focused on this topic, but there is still a huge gap between the research and practical application. Here, the research network of inactivating PMs by P/ECO processes has been comprehensively summarized, and the electrode/reactor/process design strategies based on strengthening direct and indirect oxidation, enhancing mass transfer efficiency and electron transfer efficiency, and improving the effective dose of electrogenerated oxidants are discussed. Furthermore, the factors affecting the inactivation of PMs and the issues regarding to stability and lifetime of the electrode are discussed respectively. Finally, the important research priorities and possible research challenges of P/ECO processes are put forward to make significant progress of this technology.

Biofunctionalized metal-organic frameworks and host-guest interactions for advanced biomedical applications

Owing to highly favourable properties such as enormous internal surface areas, high porosity and large flexibility, when it comes to the choice of precursors and high control over their structures and porosity, metal-organic frameworks (MOFs) have emerged as promising materials for applications such as gas storage and separation, catalysis, wastewater filtration, etc. The applications of MOFs, despite being so lucrative materials, are very limitedly explored in biomedical applications owing to several concerns such as their biocompatibility, rate of degradation and rate of accumulation in tissues and biological systems. Newer methods are being developed to make MOFs more biologically palatable by their surface functionalization using biomolecules such as nucleic acids, amino acids and lipids. Here we present the progress in biofunctionalization methods of MOFs for improving their physical and chemical properties for biomedical applications, with special focus on their formation via covalent and non-covalent routes. Following this, we discuss in detail the applications of these biofunctionalized MOFs in areas of drug delivery, bio-sensing and bio-imaging. We conclude by presenting a brief outlook of the major challenges that lie ahead for mainstream usage of these materials for advanced biomedical applications.

Insight into enhanced Fenton-like degradation of antibiotics over CuFeO2 based nanocomposite: To improve the utilization efficiency of OH/O2- via minimizing its migration distance

In Fenton or Fenton-like processes, the key step is to catalyze H₂O₂ and produce highly reactive OH radicals. More efforts are then focus on designing efficient heterogeneous Fenton catalysts by activating H₂O₂ to generate OH at the highest possible steady state concentration. In this study, using the antibiotic ofloxacin as target organic pollutant, we firstly demonstrate a point of view for improving OH utilization efficiency by regulating surface chemical reactions to minimizing its migration distance to the target pollutant. C doped g-C₃N₄ incorporated CuFeO₂ (CCN/CuFeO₂) exhibited almost ten times higher ofloxacin degradation rate constant than our previously reported CuFeO₂ {012} catalyst (0.1634 vs 0.0179 min^-1). Since similar amount of OH was generated, the different inhibition effect of tert-butyl alcohol and nitrobenzene on the ofloxacin degradation confirmed that the much-enhanced ofloxacin degradation was attributed to the surface Fenton reaction process. According to XPS and EXAFS characterization, the C-O-Cu bond between g-C₃N₄ and CuFeO₂ established a closed-circuit surface Fenton reaction mechanism. H₂O₂ was adsorbed and decomposed into OH/O₂^- over ≡Cu ⁺ site in CuFeO₂. The successful construction of CCN/CuFeO₂ creates a negative surface potential and benefits the enrichment of target antibiotics from water, which greatly reduces the migration distance of OH/O₂^•- to adjacent pollutant and then increases the OH/O₂^- utilization efficiency by avoiding the unwanted quenching. Hence, CCN/CuFeO₂ possesses superior Fenton catalytic activity and long-term stability.

Derivatives of metal-organic frameworks for heterogeneous Fenton-like processes: From preparation to performance and mechanisms in wastewater purification - A mini review

Organic pollution is an ever-growing issue in aquatic environment, Fenton-like processes have gained widespread acceptance due to their high oxidative potential and environmental compatibility. Derivatives of metal-organic frameworks (MOFs) are emerging heterogeneous Fenton-like catalysts, which have advantages of large surface area, diversity of structures, and abundant active sites. This work focuses on the recent advances in MOFs derivatives including metal compounds and metal incorporated carbons for Fenton-like processes. First, preparation strategies, structures and compositions are introduced. And then, the removal of organic pollutant in Fenton, electro-Fenton, and photo-Fenton process catalyzed by MOFs derivative is summarized, respectively. The contents particularly devote efforts to build connections among preparation, structures, compositions, and performance. Furthermore, the mechanisms of improving performance are discussed in detail. Finally, the perspectives of MOFs derivatives toward Fenton-like applications are proposed.

Pharmaceutical compounds used in the COVID-19 pandemic: A review of their presence in water and treatment techniques for their elimination

During the COVID-19 pandemic, high consumption of antivirals, antibiotics, antiparasitics, antiprotozoals, and glucocorticoids used in the treatment of this virus has been reported. Conventional treatment systems fail to efficiently remove these contaminants from water, becoming an emerging concern from the environmental field. Therefore, the objective of the present work is to address the current state of the literature on the presence and removal processes of these drugs from water bodies. It was found that the concentration of most of the drugs used in the treatment of COVID-19 increased during the pandemic in water bodies. Before the pandemic, Azithromycin concentrations in surface waters were reported to be in the order of 4.3 ng L^-1, and during the pandemic, they increased up to 935 ng L^-1. Laboratory scale studies conclude that adsorption and advanced oxidation processes (AOPs) can be effective in the removal of these drugs. Up to more than 80% removal of Azithromycin, Chloroquine, Ivermectin, and Dexamethasone in aqueous solutions have been reported using these processes. Pilot-scale tests achieved 100% removal of Azithromycin from hospital wastewater by adsorption with powdered activated carbon. At full scale, treatment plants supplemented with ozonation and artificial wetlands removed all Favipiravir and Azithromycin, respectively. It should be noted that hybrid technologies can improve removal rates, process kinetics, and treatment cost. Consequently, the development of new materials that can act synergistically in technically and economically sustainable treatments is required.

In-situ growth of Co/Ni bimetallic organic frameworks on carbon spheres with catalytic ozonation performance for removal of bio-treated coking wastewater

The Co/Ni-MOFs@CS composite derived from Co/Ni bimetallic organic framework was synthesized and characterized. Compared with a single O₃ system, the synergy between carbon sphere (CS) and metal organic frameworks (MOFs) improved the electron transfer efficiency and the formation rate of •OH. The coexistence of Co and Ni in various valence states might accelerate the cyclic process of Co(II)/Co(III) and Ni(II)/Ni(III), thereby improving the catalytic activity. Taking levofloxacin as a model pollutant, the mechanism of catalytic process was discussed, and the catalytic reaction was successfully applied to the removal of residual organics in bio-treated coking wastewater (BTCW). The removal rates of chemical oxygen demand (COD) and total organic carbon (TOC) in 60 min were 50.85%-53.71% and 39.98%-43.48%. From the perspective of UV absorption and 3D EEM, catalytic ozonation was more conducive to breaking the electronic protection of inert organic molecules such as heterocyclic compounds, and achieving higher efficiency of mineralization. It provides a new idea for catalytic ozonation technology of wastewater treatment in the future from theory, technology and application.

Copper oxide/peroxydisulfate system for urban wastewater disinfection: Performances, reactive species, and antibiotic resistance genes removal

In this study, copper oxide (CuO) catalyzed peroxydisulfate (PDS) system was investigated for the inactivation of a broad range of pathogenic microorganisms from urban wastewater. Complete inactivation of Escherichia coli, Enterococcus, F-specific RNA bacteriophages from secondary treated wastewater was achieved after a short time (15-30 min) treatment with CuO (10 g/L)/PDS (1 mM) system, but spores of sulfite-reducing bacteria took 120 min. No bacterial regrowth occurred during storage after treatment. Significant reduction of the pathogens was explained by the generation of the highly selective Cu(III) oxidant, as the predominant reactive species, which could quickly oxidize guanine through a one-electron oxidation pathway. Additionally, the potential of the CuO (10 g/L)/PDS (1 mM) system to inactivate antibiotic-resistant bacteria and antibiotic resistance genes (ARB&Gs) was explored. Sulfamethoxazole-resistant E. coli was used as the model ARB and a 3.2 log of reduction was observed after 10 min of treatment. A considerable reduction (0.7-2.3 log) of selected ARGs including blaTEM, qnrS, emrB, sul1, and genes related to the dissemination of antibiotic resistance, including the Class 1 integron-integrase (intI1), and the insertion sequence (IS613) was achieved after 60 min treatment. All these findings indicated the promising applicability of the CuO/PDS system as a disinfection technology for wastewater reuse in agriculture.

Hybrid Organic–Inorganic Membranes for Photocatalytic Water Remediation

Mismanagement, pollution and excessive use have depleted the world’s water resources, producing a shortage that in some territories is extreme. In this context, the need for potable water prompts the development of new and more efficient wastewater treatment systems to overcome shortages by recovering and reusing contaminated water. Among the water treatment methods, membrane technology is considered one of the most promising. Besides, photocatalytic degradation has become an attractive and efficient technology for water and wastewater treatment. However, the use of unsupported catalysts has as its main impediment their separation from the water once treated. With this, providing the membranes with this photocatalyzed degradation capacity can improve the application of photocatalysts, since in many cases their application improves their recovery and reuse. This review describes the general photocatalytic processes of the main inorganic nanoparticles used as fillers in hybrid polymeric membranes. In addition, the most recent hybrid organic–inorganic membranes are reviewed. Finally, the membranes formed by metal–organic frameworks that can be considered one of the newest and most versatile developments are described.

Multiple cobalt active sites evenly embedded in mesoporous carbon nanospheres derived from a polymer-metal-organic framework: efficient removal and photodegradation of malachite green

The derivative catalysts of polyMOF(Co) effectively degrade malachite green under visible irradiation.

Facile and Efficient Photocatalyst for Degradation of Chlortetracycline Promoted by H2O2

The composite photocatalyst based on a cerium (III) metal-organic framework (MOF-1 or 1), graphene oxide (GO), and Fe3O4 was constructed for the first time and was investigated for the degradation...