Metagenome enrichment approach used for selection of oil-degrading bacteria consortia for drill cutting residue bioremediation

Diversity of hydrocarbon-degrading bacteria in mangroves rhizosphere as an indicator of oil-pollution bioremediation in mangrove forests

Mangrove ecosystems, characterized by high levels of productivity, are susceptible to anthropogenic activities, notably oil pollution arising from diverse origins including spills, transportation, and industrial effluents. Owing to their role in climate regulation and economic significance, there is a growing interest in developing mangrove conservation strategies. In the Arabian Gulf, mangroves stand as the sole naturally occurring green vegetation due to the region's hot and arid climate. However, they have faced persistent oil pollution for decades. This review focuses on global mangrove distribution, with a specific emphasis on Qatar's mangroves. It highlights the ongoing challenges faced by mangroves, particularly in relation to the oil industry, and the impact of oil pollution on these vital ecosystems. It outlines major oil spill incidents worldwide and the diverse hydrocarbon-degrading bacterial communities within polluted areas, elucidating their potential for bioremediation. The use of symbiotic interactions between mangrove plants and bacteria offers a more sustainable, cost-effective and environmentally friendly alternative. However, the success of these bioremediation strategies depends on a deep understanding of the dynamics of bacterial communities, environmental factors and specific nature of the pollutants.

Bioremediation of petroleum refinery wastewater using Bacillus subtilis IH-1 and assessment of its toxicity

Environmental contamination from petroleum refinery operations has increased due to the rapid population growth and modernization of society, necessitating urgent repair. Microbial remediation of petroleum wastewater by prominent bacterial cultures holds promise in circumventing the issue of petroleum-related pollution. Herein, the bacterial culture was isolated from petroleum-contaminated sludge samples for the valorization of polyaromatic hydrocarbons and biodegradation of petroleum wastewater samples. The bacterial strain was screened and identified as Bacillus subtilis IH-1. After six days of incubation, the bacteria had degraded 25.9% of phenanthrene and 20.3% of naphthalene. The treatment of wastewater samples was assessed using physico-chemical and Fourier-transform infrared spectroscopy analysis, which revealed that the level of pollutants was elevated and above the allowed limits. Following bacterial degradation, the reduction in pollution parameters viz. EC (82.7%), BOD (87.0%), COD (80.0%), total phenols (96.3%), oil and grease (79.7%), TKN (68.8%), TOC (96.3%) and TPH (52.4%) were observed. The reduction in pH and heavy metals were also observed after bacterial treatment. V. mungo was used in the phytotoxicity test, which revealed at 50% wastewater concentration the reduction in biomass (30.3%), root length (87.7%), shoot length (93.9%), and seed germination (30.0%) was observed in comparison to control. When A. cepa root tips immersed in varying concentrations of wastewater samples, the mitotic index significantly decreased, suggesting the induction of cytotoxicity. However, following the bacterial treatment, there was a noticeable decrease in phytotoxicity and cytotoxicity. The bacterial culture produces lignin peroxidase enzyme and has the potential to degrade the toxic pollutants of petroleum wastewater. Therefore the bacterium may be immobilised or directly used at reactor scale or pilot scale study to benefit the industry and environmental safety.

Degradation of multiple PAHs and co-contaminants by microbial consortia and their toxicity assessment

The anthropogenic activities toward meeting the energy requirements have resulted in an alarming rise in environmental pollution levels. Among pollutants, polycyclic aromatic hydrocarbons (PAHs) are the most predominant due to their persistent and toxic nature. Amidst the several pollutants depuration methods, bioremediation utilizing biodegradation is the most viable alternative. This study investigated the biodegradation efficacy using developed microbial consortium PBR-21 for 2-4 ringed PAHs named naphthalene (NAP), anthracene (ANT), fluorene (FLU), and pyrene (PYR). The removal efficiency was observed up to 100 ± 0.0%, 70.26 ± 4.2%, 64.23 ± 2.3%, and 61.50 ± 2.6%, respectively, for initial concentrations of 400 mg L-1 for NAP, ANT, FLU, and PYR respectively. Degradation followed first-order kinetics with rate constants of 0.39 d-1, 0.10 d-1, 0.08 d-1, and 0.07 d-1 and half-lifet 1 / 2  of 1.8 h, 7.2 h, 8.5 h, and 10 h, respectively. The microbial consortia were found to be efficient towards the co-contaminants with 1 mM concentration. Toxicity examination indicated that microbial-treated PAHs resulted in lesser toxicity in aquatic crustaceans (Artemia salina) than untreated PAHs. Also, the study suggests that indigenous microbial consortia PBR-21 has the potential to be used in the bioremediation of PAH-contaminated environment.

Strategies for mitigation of pesticides from the environment through alternative approaches: A review of recent developments and future prospects

Chemical-based peticides are having negative impacts on both the healths of human beings and plants as well. The World Health Organisation (WHO), reported that each year, >25 million individuals in poor nations are having acute pesticide poisoning cases along with 20,000 fatal injuries at global level. Normally, only ∼0.1% of the pesticide reaches to the intended targets, and rest amount is expected to come into the food chain/environment for a longer period of time. Therefore, it is crucial to reduce the amounts of pesticides present in the soil. Physical or chemical treatments are either expensive or incapable to do so. Hence, pesticide detoxification can be achieved through bioremediation/biotechnologies, including nano-based methodologies, integrated approaches etc. These are relatively affordable, efficient and environmentally sound methods. Therefore, alternate strategies like as advanced biotechnological tools like as CRISPR Cas system, RNAi and genetic engineering for development of insects and pest resistant plants which are directly involved in the development of disease- and pest-resistant plants and indirectly reduce the use of pesticides. Omics tools and multi omics approaches like metagenomics, genomics, transcriptomics, proteomics, and metabolomics for the efficient functional gene mining and their validation for bioremediation of pesticides also discussed from the literatures. Overall, the review focuses on the most recent advancements in bioremediation methods to lessen the effects of pesticides along with the role of microorganisms in pesticides elimination. Further, pesticide detection is also a big challenge which can be done by using HPLC, GC, SERS, and LSPR ELISA etc. which have also been described in this review.

Potential of some microbial isolates on diesel hydrocarbons removal, bio surfactant production and biofilm formation

Potential of Arthrobacter citreus B27Pet, Bacillus thuringiensis B48Pet and Candida catnulata to produce biosurfactant using four different carbon sources (naphthalene, hexadecane, diesel and petroleum crude oil) was investigated. Removal of petroleum crude oil from aqueous culture and degradation of diesel were also determined using single and mixed culture of strains. The biofilm existence in single and mixed culture of strains was considered using naphthalene, hexadecane and diesel in culture medium. Cell surface hydrophobicity of A. citreus was higher than other isolates which also showed maximum surface tension reduction and emulsification index. As a whole, remarkable biosurfactant production occurred using petroleum crude oil as a carbon source in medium. A. citreus was found to be more robust than other tested strains in removal efficiency of crude oil due to its biosurfactant production capability. Statistically significant positive correlation was observed between biofilm existence and surface tension using diesel and hexadecane as carbon source. Overall diesel biodegradation efficiency by the mix culture of three applied strains was about 75% within a short period of time (10 days) which was accompanied with high biofilm production.

Synthetic biology tools for environmental protection

Synthetic biology transforms the way we perceive biological systems. Emerging technologies in this field affect many disciplines of science and engineering. Traditionally, synthetic biology approaches were commonly aimed at developing cost-effective microbial cell factories to produce chemicals from renewable sources. Based on this, the immediate beneficial impact of synthetic biology on the environment came from reducing our oil dependency. However, synthetic biology is starting to play a more direct role in environmental protection. Toxic chemicals released by industries and agriculture endanger the environment, disrupting ecosystem balance and biodiversity loss. This review highlights synthetic biology approaches that can help environmental protection by providing remediation systems capable of sensing and responding to specific pollutants. Remediation strategies based on genetically engineered microbes and plants are discussed. Further, an overview of computational approaches that facilitate the design and application of synthetic biology tools in environmental protection is presented.

Metataxonomic Characterization of Enriched Consortia Derived from Oil Spill-Contaminated Sites in Guimaras, Philippines, Reveals Major Role of Klebsiella sp. in Hydrocarbon Degradation

Oil spills are major anthropogenic disasters that cause serious harm to marine environments. In the Philippines, traditional methods of rehabilitating oil-polluted areas were proven to be less efficient and cause further damage to the environment. Microbial degradation has poised itself to be a promising alternative to those traditional methods in remediating oil spills. Hence, the present study aimed to enrich and characterize hydrocarbon-degrading microbial consortia from oil-contaminated regions in Guimaras Island for potential use in bioremediation. A total of 75 soil samples were obtained and used as inoculum for the enrichment for hydrocarbon degraders. Afterwards, 32 consortia were recovered and subjected to the 2,6-DCPIP assay for biodegradation ability on four types of hydrocarbons: diesel, xylene, hexane, and hexadecane. The consortia that obtained the highest percent degradation for each of the four hydrocarbons were "B2" (92.34% diesel degraded), "A5" (85.55% hexadecane degraded), "B1" (74.33% hexane degraded), and "B7" (63.38% xylene degraded). Illumina MiSeq 16S rRNA gene amplicon sequencing revealed that the dominant phyla in all consortia are Pseudomonadota (previously Proteobacteria), followed by Bacillota (previously Firmicutes). Overall, the amplicon sequence variants (ASVs) retrieved were mainly from the Gammaproteobacteria class, in which many hydrocarbon-degrading bacteria are found. Predictive functional profiling of the consortium showed the presence of genes involved in the degradation of recalcitrant hydrocarbon pollutants. Fatty acid metabolism, which includes alkB (alkane-1-monooxygenase) and genes for beta oxidation, was inferred to be the most abundant amongst all hydrocarbon degradation pathways. Klebsiella sp. is the predominant ASV in all the sequenced consortia as well as the major contributor of hydrocarbon degradation genes. The findings of the study can serve as groundwork for the development of hydrocarbon-degrading bacterial consortia for the bioremediation of oil spill-affected areas in the Philippines. Likewise, this paper provides a basis for further investigation into the role of Klebsiella sp. in the bioremediation of hydrocarbon pollutants.

Physical and chemical characterization of drill cuttings: A review

Drill cuttings comprise a mixture of rocks generated during drilling activities of exploration and production of oil and gas. These residues' properties are variable, depending on several drilling parameters and drilled rock composition. Many scientific studies have been published regarding the characterization of these residues. Articles summarizing these residues' characteristics and toxicity data are poorly explored in the literature. This work reviews the principal methods used to characterize drill cuttings and data about these residues' properties. Some authors have reported the large content of Zn in drill cuttings. These cuttings can be associated with base fluids (as olefins, varying from C11 to C18), and some time crude oil (high range of TPH, unresolved complex mixtures, and PAH compounds). Acute and chronic toxicity tests have shown negative impacts of different types of fluids, the components of these fluids, and cuttings on other marine organisms.

Genomic and phenotypic features of Acinetobacter baumannii isolated from oil reservoirs reveal a novel subspecies specialized in degrading hazardous hydrocarbons

The genus Acinetobacter encompasses biotechnologically relevant species and nosocomial pathogens. In this study, nine isolates recovered from different oil reservoir samples showed the ability to grow with petroleum as the only carbon source and possessed the ability to emulsify kerosene. The whole genomes of the nine strains were sequenced and analyzed. The average nucleotide identity (ANI) and digital DNA-DNA hybridization (dDDH) values of all strains were compared to the reference strains, and the results were below the reference values (<97.88 and 82, respectively), suggesting that the isolates belong to a new subspecies of Acinetobacter baumannii. The name Acinetobacter baumannii oleum ficedula is proposed. A comparison of the whole genome repertoire of 290 Acinetobacter species indicated that the strains in this study resemble non-pathogenic Acinetobacter strains. However, the new isolates resemble A. baumannii when comparing virulence factors. The isolates in this study carry many genes involved in hydrocarbon degradation, indicating the potential to degrade most toxic compounds listed by environmental regulatory agencies such as ATSDR, EPA, and CONAMA. In addition, despite the absence of known biosurfactant or bioemulsifier genes, the strains showed emulsifying activity, suggesting the presence of new pathways or genes related to this process. This study investigated the genomic, phenotypic, and biochemical features of the novel environmental subspecies A. baumannii oleum ficedula, revealing their potential to degrade hydrocarbons and to produce biosurfactants or bioemulsifiers. Applying these environmental subspecies in bioaugmentation strategies sheds light on future approaches to bioremediation. The study shows the importance of genomic analysis of environmental strains and their inclusion in metabolic pathways databases, highlighting unique enzymes/alternative pathways for consuming hazardous hydrocarbons.

Deciphering the recent trends in pesticide bioremediation using genome editing and multi-omics approaches: a review

Pesticide pollution in recent times has emerged as a grave environmental problem contaminating both aquatic and terrestrial ecosystems owing to their widespread use. Bioremediation using gene editing and system biology could be developed as an eco-friendly and proficient tool to remediate pesticide-contaminated sites due to its advantages and greater public acceptance over the physical and chemical methods. However, it is indispensable to understand the different aspects associated with microbial metabolism and their physiology for efficient pesticide remediation. Therefore, this review paper analyses the different gene editing tools and multi-omics methods in microbes to produce relevant evidence regarding genes, proteins and metabolites associated with pesticide remediation and the approaches to contend against pesticide-induced stress. We systematically discussed and analyzed the recent reports (2015-2022) on multi-omics methods for pesticide degradation to elucidate the mechanisms and the recent advances associated with the behaviour of microbes under diverse environmental conditions. This study envisages that CRISPR-Cas, ZFN and TALEN as gene editing tools utilizing Pseudomonas, Escherichia coli and Achromobacter sp. can be employed for remediation of chlorpyrifos, parathion-methyl, carbaryl, triphenyltin and triazophos by creating gRNA for expressing specific genes for the bioremediation. Similarly, systems biology accompanying multi-omics tactics revealed that microbial strains from Paenibacillus, Pseudomonas putida, Burkholderia cenocepacia, Rhodococcus sp. and Pencillium oxalicum are capable of degrading deltamethrin, p-nitrophenol, chlorimuron-ethyl and nicosulfuron. This review lends notable insights into the research gaps and provides potential solutions for pesticide remediation by using different microbe-assisted technologies. The inferences drawn from the current study will help researchers, ecologists, and decision-makers gain comprehensive knowledge of value and application of systems biology and gene editing in bioremediation assessments.

Treatment of drilling fluid waste during oil and gas drilling: a review

Oil and gas exploration and development provide important energy sources for the world, and drilling fluid is an essential engineering material for oil and gas exploration and development. During the drilling of oil wells, drilling fluids are eventually discarded as waste products after many cycles. Abandoned drilling fluid constitutes one of the largest wastes generated during oil and gas exploration and development. Drilling fluid contains many chemicals, which turn into pollutants during use. Furthermore, when drilling is carried out to reach reservoir, the drilling fluid becomes contaminated with crude oil. It may also mix with groundwater containing salts and heavy metals. The resulting pollutants and harmful substances threaten the environment, humans, animals, and plants. The variety and complexity of drilling fluid waste have increased in recent years. Various countries and regions are paying more attention to the ecological environment, and effective methods are urgently needed to solve problems associated with of environmental pollution caused by drilling fluid wastes. At present, various physical, chemical, and biological methods have been proposed for the treatment of drilling fluid wastes: safe landfilling, stabilization/solidification treatment, physicochemical treatment, thermal treatment, supercritical fluid treatment, bioremediation, etc. All of these methods show promising characteristics, and they each have advantages and limitations; thus, treatment methods need to be selected according to the actual application scenarios. This critical overview is based on an extensive literature review, and it summarizes and expounds on the current drilling fluid waste treatment technologies and proposes views future potential and outlook.

Potential Utilization of Bacterial Consortium of Symbionts Marine Sponges in Removing Polyaromatic Hydrocarbons and Heavy Metals, Review

Toxic materials in waste generally contain several components of the global trending pollutant category, especially PAHs and heavy metals. Bioremediation technology for waste management that utilizes microorganisms (bacteria) has not been fully capable of breaking down these toxic materials into simple and environmentally friendly chemical products. This review paper examines the potential application of a consortium of marine sponge symbionts with high performance and efficiency in removing PAHs and heavy metal contaminants. The method was carried out through a review of several related research articles by the author and published by other researchers. The results of the study conclude that the development of global trending pollutant (GTP) bioremediation technology could be carried out to increase the efficiency of remediation. Several types of marine sponge symbiont bacteria, hydrocarbonoclastic (R-1), metalloclastic (R-2), and metallo-hydro-carbonoclastic (R-3), have the potential to be applied to improve waste removal performance. A consortium of crystalline bacterial preparations is required to mobilize into GTP-exposed sites rapidly. Bacterial symbionts of marine sponges can be traced mainly to sea sponges, whose body surface is covered with mucus.

Regional distribution, properties, treatment technologies, and resource utilization of oil-based drilling cuttings: A review

Oil-based drilling cuttings (OBDC) are hazardous wastes produced during the extensive use of oil-based drilling mud in oil and gas exploration and development. They have strong mutagenic, carcinogenic, and teratogenic effects and need to be properly disposed of to avoid damaging the natural environment. This paper reviews the recent research progress on the regional distribution, properties, treatment technologies, and resource utilization of OBDC. The advantages and disadvantages of different technologies for removing petroleum pollutants from OBDC were comprehensively analyzed, and required future developments in treatment technologies were proposed.

Soil microbial ecological effect of shale gas oil-based drilling cuttings pyrolysis residue used as soil covering material

The residue derived from oil-based drilling cutting pyrolysis could be used as paving materials. Some petroleum hydrocarbons remain in the residue after pyrolysis and cause severe environmental pollution. In this study, the soil column leaching experiments were carried out under different leaching amounts, and the vertical migration characteristics of petroleum hydrocarbons in soil and the dynamic response mechanism of microorganisms to petroleum hydrocarbons were analyzed. The result showed that the soil pH value and water content with different leaching amounts did not differ significantly, but the vertical migration ability of each petroleum hydrocarbon component was different. In petroleum hydrocarbon contaminated soil, the relative abundance of Proteobacteria maintained a high level (23.6%-60.7%). At the genus level, the relative abundance of Massilia decreased with the leaching amount increased. According to PICRUSt, Monooxygenase [EC: 1.14.13.-] played a significant role in petroleum hydrocarbon degradation. While Long-chain-fatty-acid-CoA ligase [EC: 6.2.1.3] had the highest relative abundance. By studying the influence of shale gas oil-based drilling cuttings pyrolysis residue on soil physical and chemical properties and soil microorganisms, this work provides scientific ecological assessment for the resource application of pyrolysis residue.

A metagenomic portrait of the microbial community responsible for two decades of bioremediation of poly-contaminated groundwater

Biodegradation of pollutants is a sustainable and cost-effective solution to groundwater pollution. Here, we investigate microbial populations involved in biodegradation of poly-contaminants in a pipeline for heavily contaminated groundwater. Groundwater moves from a polluted park to a treatment plant, where an aerated bioreactor effectively removes the contaminants. While the biomass does not settle in the reactor, sediment is collected afterwards and used to seed the new polluted groundwater via a backwash cycle. The pipeline has successfully operated since 1999, but the biological components in the reactor and the contaminated park groundwater have never been described. We sampled seven points along the pipeline, representing the entire remediation process, and characterized the changing microbial communities using genome-resolved metagenomic analysis. We assembled 297 medium- and high-quality metagenome-assembled genome sequences representing on average 46.3% of the total DNA per sample. We found that the communities cluster into two distinct groups, separating the anaerobic communities in the park groundwater from the aerobic communities inside the plant. In the park, the community is dominated by members of the genus Sulfuricurvum, while the plant is dominated by generalists from the order Burkholderiales. Known aromatic compound biodegradation pathways are four times more abundant in the plant-side communities compared to the park-side. Our findings provide a genome-resolved portrait of the microbial community in a highly effective groundwater treatment system that has treated groundwater with a complex contamination profile for two decades.

Metagenomics: A Tool for Exploring Key Microbiome With the Potentials for Improving Sustainable Agriculture

Microorganisms are immense in nature and exist in every imaginable ecological niche, performing a wide range of metabolic processes. Unfortunately, using traditional microbiological methods, most microorganisms remain unculturable. The emergence of metagenomics has resolved the challenge of capturing the entire microbial community in an environmental sample by enabling the analysis of whole genomes without requiring culturing. Metagenomics as a non-culture approach encompasses a greater amount of genetic information than traditional approaches. The plant root-associated microbial community is essential for plant growth and development, hence the interactions between microorganisms, soil, and plants is essential to understand and improve crop yields in rural and urban agriculture. Although some of these microorganisms are currently unculturable in the laboratory, metagenomic techniques may nevertheless be used to identify the microorganisms and their functional traits. A detailed understanding of these organisms and their interactions should facilitate an improvement of plant growth and sustainable crop production in soil and soilless agriculture. Therefore, the objective of this review is to provide insights into metagenomic techniques to study plant root-associated microbiota and microbial ecology. In addition, the different DNA-based techniques and their role in elaborating plant microbiomes are discussed. As an understanding of these microorganisms and their biotechnological potentials are unlocked through metagenomics, they can be used to develop new, useful and unique bio-fertilizers and bio-pesticides that are not harmful to the environment.

Valorization of Small Alkanes by Biocatalytic Oxyfunctionalization

The oxidation of alkanes into valuable chemical products is a vital reaction in organic synthesis. This reaction, however, is challenging, owing to the inertness of C-H bonds. Transition metal catalysts for C-H functionalization are frequently explored. Despite chemical alternatives, nature has also evolved powerful oxidative enzymes (e. g., methane monooxygenases, cytochrome P450 oxygenases, peroxygenases) that are capable of transforming C-H bonds under very mild conditions, with only the use of molecular oxygen or hydrogen peroxide as electron acceptors. Although progress in alkane oxidation has been reviewed extensively, little attention has been paid to small alkane oxidation. The latter holds great potential for the manufacture of chemicals. This Minireview provides a concise overview of the most relevant enzyme classes capable of small alkanes (C_<6 ) oxyfunctionalization, describes the essentials of the catalytic mechanisms, and critically outlines the current state-of-the-art in preparative applications.

Bacterial diversity and competitors for degradation of hazardous oil refining waste under selective pressures of temperature and oxygen

Oil refining waste (ORW) contains complex, hazardous, and refractory components, causing more severe long-term environmental pollution than petroleum. Here, ORW was used to simulate the accelerated domestication of bacteria from oily sludges and polymer-flooding wastewater, and the effects of key factors, oxygen and temperature, on the ORW degradation were evaluated. Bacterial communities acclimated respectively in 30/60 °C, aerobic/anaerobic conditions showed differentiated degradation rates of ORW, ranging from 5% to 34%. High-throughput amplicon sequencing and ORW component analysis revealed significant correlation between bacterial diversity/biomass and degradation efficiency/substrate preference. Under mesophilic and oxygen-rich condition, the high biomass and abundant biodiversity with diverse genes and pathways for petroleum hydrocarbons degradation, effectively promoted the rapid and multi-component degradation of ORW. While under harsh conditions, a few dominant genera still contributed to ORW degradation, although the biodiversity was severely restricted. The typical dominant facultative anaerobes Bacillus (up to 99.8% abundance anaerobically) and Geobacillus (up to 99.9% abundance aerobically and anaerobically) showed oxygen-independent sustainable degradation ability and broad-spectrum of temperature adaptability, making them promising and competitive bioremediation candidates for future application. Our findings provide important strategies for practical bioremediation of varied environments polluted by hazardous ORW.

Tapping the Role of Microbial Biosurfactants in Pesticide Remediation: An Eco-Friendly Approach for Environmental Sustainability

Pesticides are used indiscriminately all over the world to protect crops from pests and pathogens. If they are used in excess, they contaminate the soil and water bodies and negatively affect human health and the environment. However, bioremediation is the most viable option to deal with these pollutants, but it has certain limitations. Therefore, harnessing the role of microbial biosurfactants in pesticide remediation is a promising approach. Biosurfactants are the amphiphilic compounds that can help to increase the bioavailability of pesticides, and speeds up the bioremediation process. Biosurfactants lower the surface area and interfacial tension of immiscible fluids and boost the solubility and sorption of hydrophobic pesticide contaminants. They have the property of biodegradability, low toxicity, high selectivity, and broad action spectrum under extreme pH, temperature, and salinity conditions, as well as a low critical micelle concentration (CMC). All these factors can augment the process of pesticide remediation. Application of metagenomic and in-silico tools would help by rapidly characterizing pesticide degrading microorganisms at a taxonomic and functional level. A comprehensive review of the literature shows that the role of biosurfactants in the biological remediation of pesticides has received limited attention. Therefore, this article is intended to provide a detailed overview of the role of various biosurfactants in improving pesticide remediation as well as different methods used for the detection of microbial biosurfactants. Additionally, this article covers the role of advanced metagenomics tools in characterizing the biosurfactant producing pesticide degrading microbes from different environments.

Characterization of crude oil degrading bacterial communities and their impact on biofilm formation

In the present study, produced water sample collected from the Indian crude oil reservoir is used to enrich the bacterial communities. The impact of these enriched bacterial communities on the biodegradation of crude oil, biofilm formation, and biocorrosion process are elucidated. A crude oil degradation study is carried out with the minimal salt medium and 94% of crude oil was utilized by enriched bacterial communities. During the crude oil degradation many enzymes including alkane hydroxylase, alcohol dehydrogenase, and lipase are playing a key role in the biodegradation processes. The role of enriched bacterial biofilm on biocorrosion reactions are monitored by weight loss studies and electrochemical analysis. Weight loss study revealed that the biotic system has vigorous corrosion attacks compared to the abiotic system. Both AC-Impedance and Tafel analysis confirmed that the nature of the corrosion reaction take place in the biotic system. Very less charge transfer resistance and higher corrosion current are observed in the biotic system than in the abiotic system. Scanning electron microscope confirms that the dense biofilm formation favoured the pitting type of corrosion. X-ray diffraction analysis confirms that the metal oxides formed in the corrosion systems (biotic). From the metagenomic analysis of the V3-V4 region revealed that presence of diverse bacterial communities in the biofilm, and most of them are uncultured/unknown. Among the known genus, Bacillus, Halomonas, etc are dominant in the enriched bacterial biofilm sample. From this study, we conclude that the uncultured bacterial strains are found to be playing a key role in the pitting type of corrosion and they can utilize crude oil hydrocarbons, which make them succeeded in extreme oil reservoir environments.

Insights into Bacterial Community Involved in Bioremediation of Aged Oil-Contaminated Soil in Arid Environment

Soil contamination by hydrocarbons due to oil spills has become a global concern and it has more implications in oil producing regions. Biostimulation is considered as one of the promising remediation techniques that can be adopted to enhance the rate of degradation of crude oil. The soil microbial consortia play a critical role in governing the biodegradation of total petroleum hydrocarbons (TPHs), in particular polycyclic aromatic hydrocarbons (PAHs). In this study, the degradation pattern of TPHs and PAHs of Kuwait soil biopiles was measured at three-month intervals. Then, the microbial consortium associated with oil degradation at each interval was revealed through 16S rRNA based next generation sequencing. Rapid degradation of TPHs and most of the PAHs was noticed at the first 3 months of biostimulation with a degradation rate of pyrene significantly higher compared to other PAHs counterparts. The taxonomic profiling of individual stages of remediation revealed that, biostimulation of the investigated soil favored the growth of Proteobacteria, Alphaprotobacteria, Chloroflexi, Chlorobi, and Acidobacteria groups. These findings provide a key step towards the restoration of oil-contaminated lands in the arid environment.

Statistical Optimisation of Diesel Biodegradation at Low Temperatures by an Antarctic Marine Bacterial Consortium Isolated from Non-Contaminated Seawater

Hydrocarbon pollution is widespread around the globe and, even in the remoteness of Antarctica, the impacts of hydrocarbons from anthropogenic sources are still apparent. Antarctica’s chronically cold temperatures and other extreme environmental conditions reduce the rates of biological processes, including the biodegradation of pollutants. However, the native Antarctic microbial diversity provides a reservoir of cold-adapted microorganisms, some of which have the potential for biodegradation. This study evaluated the diesel hydrocarbon-degrading ability of a psychrotolerant marine bacterial consortium obtained from the coast of the north-west Antarctic Peninsula. The consortium’s growth conditions were optimised using one-factor-at-a-time (OFAT) and statistical response surface methodology (RSM), which identified optimal growth conditions of pH 8.0, 10 °C, 25 ppt NaCl and 1.5 g/L NH₄NO₃. The predicted model was highly significant and confirmed that the parameters’ salinity, temperature, nitrogen concentration and initial diesel concentration significantly influenced diesel biodegradation. Using the optimised values generated by RSM, a mass reduction of 12.23 mg/mL from the initial 30.518 mg/mL (4% (w/v)) concentration of diesel was achieved within a 6 d incubation period. This study provides further evidence for the presence of native hydrocarbon-degrading bacteria in non-contaminated Antarctic seawater.

Assessment of Ecological Condition of Haplic Chernozem Calcic Contaminated with Petroleum Hydrocarbons during Application of Bioremediation Agents of Various Natures

Petroleum hydrocarbon contamination disrupts ecological and agricultural soil functions. For their restoration, bioremediation agents of various natures are used (nonorganic or organic fertilizers, bacterial preparations, adsorbing agents) featuring different remediation mechanisms (adsorption or biostimulation of petroleum hydrocarbon decomposition). The objective of this research is the assessment of the ecological condition of petroleum hydrocarbon-contaminated Haplic Chernozem Calcic after the application of bioremediation agents of various natures. The influence of glauconite, nitroammophos, sodium humate, the bacterial preparation “Baikal EM-1”, and biochar on the intensity of petroleum hydrocarbon decomposition and the ecological condition of Haplic Chernozem Calcic was analyzed. The ecological condition of Haplic Chernozem Calcic was assessed based on the residual content of petroleum hydrocarbons in soil and the following biological parameters: changes in the number of soil bacteria, activity of catalase and dehydrogenases, soil respiration (CO2 emission), germinating ability, lengths of roots and shoots, and integrated index of the biological state. The minimum concentrations of residual petroleum hydrocarbons in soil were observed after the use of biochar (44% from initial content) and glauconite (49%). The biological properties of soils were affected in different ways. Soil respiration was stimulated by 3-6-fold after adding nitroammophos. Indices for the intensity of the early growth and germination of radish in soil with glauconite, sodium humate, and biochar were increased by 37–125% (p < 0.01) compared with the reference value. After the application of biochar, sodium humate, and “Baikal EM-1”, the number of soil bacteria was 66–289% higher (p < 0.01) than the reference value. At the same time, the activities of catalase and dehydrogenases were inhibited by up to 35% in variants with bioremediation agents and petroleum hydrocarbons relative to the reference values. The maximum stimulation of the biological activity (as the integrated index of the biological state (IISB)) of Haplic Chernozem Calcic was observed after applying sodium humate and biochar, with 70 and 66% (p < 0.01) increases from the reference value, respectively. Considering the net cost of bioremediation agents, the maximum cost efficiency is achieved with “Baikal EM-1”, sodium humate, and biochar: 110, 527, and 847 USD·103/ha, respectively. After using Baikal EM-1”, sodium humate, and biochar, the ecological state of Haplic Chernozem Calcic was restored.

Isolation and characterization of a novel hydrocarbonoclastic and biosurfactant producing bacterial strain: Fictibacillus phosphorivorans RP3

In this study, an indigenous novel hydrocarbonoclastic (kerosene and diesel degrading) and biosurfactant producing strain Fictibacillus phosphorivorans RP3 was identified. The characteristics of bacterial strain were ascertained through its unique morphological and biochemical attributes, 16S rRNA sequencing, and phylogenetic analysis. The degradation of hydrocarbons by F. phosphorivorans RP3 was observed at Day 7, Day 10 and Day 14 of the experimental duration. GC-FID chromatograms demonstrated a significant increase in hydrocarbon degradation (%) with progressing days (from 7 to 14). The bacterium exhibited capability to utilize and degrade n-hexadecane (used for primary screening) and petroleum hydrocarbons (kerosene and diesel; by ≥ 90%). With increase in the number of experimentation days, the optical density of the culture medium increased, whereas pH declined (became acidic) for both Kerosene and Diesel. Absence of resistance to routinely used antibiotics makes it an ideal candidate for future field application. The study is, thus, significant in view of toxicological implications of hydrocarbons and their degradation using environmentally safe techniques so as to maintain ecological and human health.

Bioremediation of oily sludge by solid complex bacterial agent with a combined two-step process

In the present research, a bioremediation process was developed using solid complex bacterial agents (SCBA) through a combined two-step biodegradation process. Four isolated strains showed high efficiency for the degradation of total petroleum hydrocarbons (TPH) and the reduction of COD of the oily sludge, at 96.6% and 92.6%, respectively. The mixed strains together with bran prepared in form of SCBA exhibited improved performance compared to individual strains, all of which had an optimal temperature of around 35 °C. The use of SCBA provided advantages over commonly used liquid media for storage and transportation. The two-step process, consisting of firstly biosurfactant-assisted oil recovery and secondly biodegradation of the remaining TPH with SCBA, demonstrated the capability for treating oily sludge with high TPH content (>10 wt%) and short process period (60 days). The large-scale (5 tons oily sludge) field test, achieving a TPH removal efficiency of 93.8% and COD reduction of 91.5%, respectively, confirmed the feasibility and superiority of the technology for industrial applications.

Utilization of oil-based mud drilling cuttings wastes from shale gas extraction for cement clinker production

A large amount of oil-based mud drilling cuttings (OBMDC) are generated during shale gas extraction, which adversely affects the environment. In order to realize the resource utilization of waste, the object of this paper is to study the feasibility of OBMDC to produce cement clinker. The results showed that at relatively low calcination temperature, adding a certain amount of OBMDC can produce cement clinker successfully and reduce fuel consumption. The compressive strength, hydration performance, and physical characteristics of clinker with 0, 3, 6, and 9% OBMDC were investigated by chemical analysis methods, X-ray diffraction, isothermal calorimetry, mercury intrusion, and energy dispersive spectroscopy. The results showed that the formulated cement has good hydration performance and the compressive strength also meets relevant standards. The heavy metal ions leaching test showed that the preparation of cement clinker by a low amount of OBMDC could effectively reduce the toxicity of OBMDC. In general, the preparation of cement clinker by OBMDC can realize the resource utilization of waste, effectively reduce its toxicity, and play a positive role in environmental protection.

Microbial Culture in Minimal Medium With Oil Favors Enrichment of Biosurfactant Producing Genes

The waste produced by petrochemical industries has a significant environmental impact. Biotechnological approaches offer promising alternatives for waste treatment in a sustainable and environment-friendly manner. Microbial consortia potentially clean up the wastes through degradation of hydrocarbons using biosurfactants as adjuvants. In this work, microbial consortia were obtained from a production water (PW) sample from a Brazilian oil reservoir using enrichment and selection approaches in the presence of oil as carbon source. A consortium was obtained using Bushnell-Haas (BH) mineral medium with petroleum. In parallel, another consortium was obtained in yeast extract peptone dextrose (YPD)-rich medium and was subsequently compared to the BH mineral medium with petroleum. Metagenomic sequencing of these microbial communities showed that the BH consortium was less diverse and predominantly composed of Brevibacillus genus members, while the YPD consortium was taxonomically more diverse. Functional annotation revealed that the BH consortium was enriched with genes involved in biosurfactant synthesis, while the YPD consortium presented higher abundance of hydrocarbon degradation genes. The comparison of these two consortia against consortia available in public databases confirmed the enrichment of biosurfactant genes in the BH consortium. Functional assays showed that the BH consortium exhibits high cellular hydrophobicity and formation of stable emulsions, suggesting that oil uptake by microorganisms might be favored by biosurfactants. In contrast, the YPD consortium was more efficient than the BH consortium in reducing interfacial tension. Despite the genetic differences between the consortia, analysis by a gas chromatography-flame ionization detector showed few significant differences regarding the hydrocarbon degradation rates. Specifically, the YPD consortium presented higher degradation rates of C12 to C14 alkanes, while the BH consortium showed a significant increase in the degradation of some polycyclic aromatic hydrocarbons (PAHs). These data suggest that the enrichment of biosurfactant genes in the BH consortium could promote efficient hydrocarbon degradation, despite its lower taxonomical diversity compared to the consortium enriched in YPD medium. Together, these results showed that cultivation in a minimal medium supplemented with oil was an efficient strategy in selecting biosurfactant-producing microorganisms and highlighted the biotechnological potential of these bacterial consortia in waste treatment and bioremediation of impacted areas.

Microbial Degradation of Hydrocarbons-Basic Principles for Bioremediation: A Review

Crude oil-derived hydrocarbons constitute the largest group of environmental pollutants worldwide. The number of reports concerning their toxicity and emphasizing the ultimate need to remove them from marine and soil environments confirms the unceasing interest of scientists in this field. Among the various techniques used for clean-up actions, bioremediation seems to be the most acceptable and economically justified. Analysis of recent reports regarding unsuccessful bioremediation attempts indicates that there is a need to highlight the fundamental aspects of hydrocarbon microbiology in a clear and concise manner. Therefore, in this review, we would like to elucidate some crucial, but often overlooked, factors. First, the formation of crude oil and abundance of naturally occurring hydrocarbons is presented and compared with bacterial ability to not only survive but also to utilize such compounds as an attractive energy source. Then, the significance of nutrient limitation on biomass growth is underlined on the example of a specially designed experiment and discussed in context of bioremediation efficiency. Next, the formation of aerobic and anaerobic conditions, as well as the role of surfactants for maintaining appropriate C:N:P ratio during initial stages of biodegradation is explained. Finally, a summary of recent scientific reports focused on the removal of hydrocarbon contaminants using bioaugmentation, biostimulation and introduction of surfactants, as well as biosurfactants, is presented. This review was designed to be a comprehensive source of knowledge regarding the unique aspects of hydrocarbon microbiology that may be useful for planning future biodegradation experiments. In addition, it is a starting point for wider debate regarding the limitations and possible improvements of currently employed bioremediation strategies.

Gene Editing and Systems Biology Tools for Pesticide Bioremediation: A Review

Bioremediation is the degradation potential of microorganisms to dissimilate the complex chemical compounds from the surrounding environment. The genetics and biochemistry of biodegradation processes in datasets opened the way of systems biology. Systemic biology aid the study of interacting parts involved in the system. The significant keys of system biology are biodegradation network, computational biology, and omics approaches. Biodegradation network consists of all the databases and datasets which aid in assisting the degradation and deterioration potential of microorganisms for bioremediation processes. This review deciphers the bio-degradation network, i.e., the databases and datasets (UM-BBD, PAN, PTID, etc.) aiding in assisting the degradation and deterioration potential of microorganisms for bioremediation processes, computational biology and multi omics approaches like metagenomics, genomics, transcriptomics, proteomics, and metabolomics for the efficient functional gene mining and their validation for bioremediation experiments. Besides, the present review also describes the gene editing tools like CRISPR Cas, TALEN, and ZFNs which can possibly make design microbe with functional gene of interest for degradation of particular recalcitrant for improved bioremediation.

The study on pyrolysis of oil-based drilling cuttings by microwave and electric heating

In this paper, the following questions were investigated: the proportion of mass loss, the mass fraction of oil, the structure, composition and ultimate analysis of solid residues and gas products. By comparing the treatment effect of using both microwave and electric as the source of heat to dispose the oil-based drilling cuttings (OBDC), the advantages of microwave heating treatment were demonstrated. Meanwhile, the composition of liquid products by microwave pyrolysis was analyzed. The results show that the microwave heating is better than electric heating and the former can promote the pyrolysis of petroleum hydrocarbons. The results of component analysis of the liquid products from OBDC by microwave pyrolysis show that C12∼C20 components pyrolyze at 500 °C. At the same time, a mass of C21∼C24 components volatilize. At the temperature above 500 °C, the thermal cracking reactions of >C25 components occur and a maximum content of paraffin in liquid products is obtained. As the temperature increases, the components obtained by pyrolysis become more and more complex.

Petroleum Hydrocarbon-Degrading Bacteria for the Remediation of Oil Pollution Under Aerobic Conditions: A Perspective Analysis

With the sharp increase in population and modernization of society, environmental pollution resulting from petroleum hydrocarbons has increased, resulting in an urgent need for remediation. Petroleum hydrocarbon-degrading bacteria are ubiquitous in nature and can utilize these compounds as sources of carbon and energy. Bacteria displaying such capabilities are often exploited for the bioremediation of petroleum oil-contaminated environments. Recently, microbial remediation technology has developed rapidly and achieved major gains. However, this technology is not omnipotent. It is affected by many environmental factors that hinder its practical application, limiting the large-scale application of the technology. This paper provides an overview of the recent literature referring to the usage of bacteria as biodegraders, discusses barriers regarding the implementation of this microbial technology, and provides suggestions for further developments.

Petroleum hydrocarbon rich oil refinery sludge of North-East India harbours anaerobic, fermentative, sulfate-reducing, syntrophic and methanogenic microbial populations

Background

Sustainable management of voluminous and hazardous oily sludge produced by petroleum refineries remains a challenging problem worldwide. Characterization of microbial communities of petroleum contaminated sites has been considered as the essential prerequisite for implementation of suitable bioremediation strategies. Three petroleum refinery sludge samples from North Eastern India were analyzed using next-generation sequencing technology to explore the diversity and functional potential of inhabitant microorganisms and scope for their on-site bioremediation.

Results

All sludge samples were hydrocarbon rich, anaerobic and reduced with sulfate as major anion and several heavy metals. High throughput sequencing of V3-16S rRNA genes from sludge metagenomes revealed dominance of strictly anaerobic, fermentative, thermophilic, sulfate-reducing bacteria affiliated to Coprothermobacter, Fervidobacterium, Treponema, Syntrophus, Thermodesulfovibrio, Anaerolinea, Syntrophobacter, Anaerostipes, Anaerobaculum, etc., which have been well known for hydrocarbon degradation. Relatively higher proportions of archaea were detected by qPCR. Archaeal 16S rRNA gene sequences showed presence of methanogenic Methanobacterium, Methanosaeta, Thermoplasmatales, etc. Detection of known hydrocarbon utilizing aerobic/facultative anaerobic (Mycobacterium, Pseudomonas, Longilinea, Geobacter, etc.), nitrate reducing (Gordonia, Novosphigobium, etc.) and nitrogen fixing (Azovibrio, Rhodobacter, etc.) bacteria suggested niche specific guilds with aerobic, facultative anaerobic and strict anaerobic populations. Phylogenetic Investigation of Communities by Reconstruction of Unobserved States (PICRUSt) predicted putative genetic repertoire of sludge microbiomes and their potential for hydrocarbon degradation; lipid-, nitrogen-, sulfur- and methane- metabolism. Methyl coenzyme M reductase A (mcrA) and dissimilatory sulfite reductase beta-subunit (dsrB) genes phylogeny confirmed methanogenic and sulfate-reducing activities within sludge environment endowed by hydrogenotrophic methanogens and sulfate-reducing Deltaproteobacteria and Firmicutes members.

Conclusion

Refinery sludge microbiomes were comprised of hydrocarbon degrading, fermentative, sulfate-reducing, syntrophic, nitrogen fixing and methanogenic microorganisms, which were in accordance with the prevailing physicochemical nature of the samples. Analysis of functional biomarker genes ascertained the activities of methanogenic and sulfate-reducing organisms within sludge environment. Overall data provided better insights on microbial diversity and activity in oil contaminated environment, which could be exploited suitably for in situ bioremediation of refinery sludge.

Electronic supplementary material

The online version of this article (10.1186/s12866-018-1275-8) contains supplementary material, which is available to authorized users.

Comparative metagenomics reveals different hydrocarbon degradative abilities from enriched oil-drilling waste

The oil drilling process generates large volumes of waste with inadequate treatments. Here, oil drilling waste (ODW) microbial communities demonstrate different hydrocarbon degradative abilities when exposed to distinct nutrient enrichments as revealed by comparative metagenomics. The ODW was enriched in Luria Broth (LBE) and Potato Dextrose (PDE) media to examine the structure and functional variations of microbial consortia. Two metagenomes were sequenced on Ion Torrent platform and analyzed using MG-RAST. The STAMP software was used to analyze statistically significant differences amongst different attributes of metagenomes. The microbial diversity presented in the different enrichments was distinct and heterogeneous. The metabolic pathways and enzymes were mainly related to the aerobic hydrocarbons degradation. Moreover, our results showed efficient biodegradation after 15 days of treatment for aliphatic hydrocarbons (C8-C33) and polycyclic aromatic hydrocarbons (PAHs), with a total of about 50.5% and 46.4% for LBE and 44.6% and 37.9% for PDE, respectively. The results obtained suggest the idea that the enzymatic apparatus have the potential to degrade petroleum compounds.