Preliminary study of the source apportionment and diversity of microplastics: Taking floating microplastics in the South China Sea as an example

Seasonal distribution of microplastics and associated ecological risks in a semi-arid freshwater ecosystem in India

Microplastics are persistent contaminants across all environmental matrices. However, there is a paucity of studies conducted in semi-arid aquatic environments. The present study investigated the seasonal variations in the distribution and characteristics of microplastics in water samples of Man Sagar Lake in northwestern India. The findings revealed that the average abundance of microplastics in samples was notably lower during the pre-monsoon season (42.93 ± 29.72 particles/L) compared to the post-monsoon season (70.54 ± 36.53 particles/L). A significant difference in microplastic abundance across different sampling locations was observed between the two seasons (F = 7.82, p < 0.0001). The majority of microplastics present in the samples during both seasons measured less than 500 μm in size, with fragments and fibers being the predominant shapes, and transparent being the most common-colored microplastic. The most abundant polymers detected were polyethylene, polypropylene, and polystyrene. Microplastic contamination factor (MCf) and Pollution Load Index (PLI >1) indicated a moderate to high level of microplastic contamination across all the sampling locations in both seasons. Furthermore, the potential ecological risk index (PERI) indicated that nearly 70 % of the lake area falls under the category of very high ecological risk in both seasons. Additionally, Spearman's correlation and PCA were employed to assess the interactions of microplastics with water quality parameters and potential source identification, respectively. The study's findings could help in developing region-specific remediation and prevention strategies by identifying high-risk areas and potential sources contributing to microplastic contamination.

Distribution and diversity of microplastics along the aquatic food web in the largest mangrove reserve of China

Knowledge of microplastics (MPs) in consumers at different trophic levels and with different feeding strategies in mangroves is essential to evaluate pathways and ecological effects from exposure to MPs. We conducted a comprehensive study on the distribution of MPs along the food web in the largest natural mangrove reserve in China, and applied diversity index of MPs, D'(MP), in terms of color, size, shape and type, to investigate complexity of MPs through the trophic cascades. The highest abundance of total MPs occurred at 5.7 ± 2.6 items/individual in fish, followed by 4.8 ± 1.9, 3.2 ± 0.5, 2.2 ± 0.9 items/individual in crabs, bivalves and shrimps, respectively. There was a correlation between the abundance of MPs in the gastrointestinal tracts (GITs) or soft tissues of organisms and trophic levels (r = 0.47, p < 0.01), while microplastic abundance were also correlated with body wet weights. The abundance and diversity of MPs in mangrove organisms were influenced by their feeding behaviors and living habitats, as consumers through indirect ingestion had significantly higher abundance of MPs than discriminate feeders. For MPs in their GITs, crabs had the highest shape D'(MP), but the lowest size D'(MP) and color D'(MP), while fish had highest color D'(MP), but significantly lower shape D'(MP). Our application of diversity index of MPs to mangrove ecosystem for the first time reveals a rather complicated distribution of MPs along the aquatic food web, demonstrating an urgent need for measures to reduce the discharge of MPs into mangrove and develop a remediation strategy.

Characteristics, influencing factors, and ecological risks of microplastics in the north branch tidal marshes of the Yangtze River estuary

Microplastic pollution is a growing global environmental issue, particularly in vulnerable tidal marsh ecosystems, where its environmental behaviour and ecological risks remain poorly understood. This study investigated the microplastic contamination in the north branch tidal marshes of the Yangtze River estuary. Surface sediment samples were collected from 42 stations across 6 transects, revealing an average microplastic abundance of 506.80 ± 386.82 items/kg. The distribution of microplastics was strongly influenced by salinity and vegetation, with seawater intrusion playing a critical role. A significant negative correlation between salinity and microplastic abundance was observed; areas dominated by Phragmites australis (low salinity) had higher microplastic abundance compared to high-salinity areas with sparse vegetation. 12 types of microplastics were identified, with polyethylene and polystyrene being the most abundant (20 % and 19 %, respectively). The most common colours were transparent (26 %) and yellow (23 %), while the predominant shapes were granular (37 %) and fragmentary (32 %). Most microplastics measured under 2000 μm, with the 200-500 μm size range accounting for 49 % of the total. Likely sources of microplastics include aquaculture equipment, industrial products, agricultural cultivation supplies, and daily necessities. Although the ecological risk index for the region is relatively low, the presence of diverse species highlights potential ecological threats.

Distribution characteristics and transport pathways of soil microplastics in coral reef islands with different developmental stages and human activities

Microplastics have attracted substantial attention on remote coral sand islands owing to their delicate ecosystems. However, the distribution, transport pathways, and control mechanisms of soil microplastics on these islands are yet to be elucidated. The coral reef islands of China's Xisha Archipelago in the South China Sea are at varying stages of development and experience differing levels of human activity, rendering them an ideal location to investigate the environmental characteristics of microplastics. This study conducted a comparative analysis of the distribution characteristics of microplastics in surface soils and beach sands, which were collected from coral cays and islands. We further analyzed the potential impacts of plant cover, geomorphology, soil environmental factors and human activities on accumulation and transport of microplastics. The results show that their abundance varies from 1068 to 1616 particles/kg on the different reef islands. Total organic carbon and dissolved organic carbon in the soils exert a significant influence on the accumulation of microplastics. The abundance of microplastics in the exposed areas showed an increasing trend with the degree of island development, and the human activities have a significant impact on the distribution of microplastics across the islands. Analysis of the microplastic abundance at different locations of the atoll reveals that ocean currents and monsoons are the primary drivers of microplastic accumulation on the coral reef islands. This study provides a scientific basis for the management of microplastic pollution and environmental conservation on remote islands.

Correcting microplastic pollution and risk assessment in Chinese watersheds

Microplastics (MPs) are emerging pollutants that are attracting attention because of their potential threats posed and their widespread presence in the environment. MP pollution in Chinese watersheds requires assessment; however, existing risk models face data-scale biases. By compiling 2,474 samples from 165 articles, we constructed a national dataset on MPs and propose a novel framework that integrates rescaled MP concentrations with MP characteristics to recalibrate MP pollution and ecological risks. The results showed that MP concentrations show substantial variability across seven orders of magnitude, and corrected data offered a more accurate representation of environmental concentrations. MP shapes, polymers, and colors differed among river basins, and population density and precipitation were important drivers of variations in MP concentrations. MP shapes, colors, and sizes that were not previously considered are now included in the risk assessment of MPs. Furthermore, 50 % of the sampling sites were in the dangerous and extremely dangerous ecological risk classes. The concentrations measured at 16.98 % of the sampling sites exceeded the risk threshold, therefore posing ecological and toxicological risks. The assessment framework may provide overall insights into the differences in MP pollution in river basins.

Spatio-temporal distribution of microplastics in surface water of typical urban rivers in North China, risk assessment and influencing factors

Urban rivers serve as primary receivers and transporters of microplastics. In this study, the spatio-temporal distribution of microplastics in the surface waters of the Zhang River and Fuyang River, which are representative urban rivers in North China, was investigated. The risk evaluation and influencing factors were also analyzed. The results indicated that the average abundance of microplastics in the surface waters of the Zhang River was higher during the dry season, while the average abundance in the Fuyang River was lower than that observed in the Zhang River during the wet season. Furthermore, the abundance of microplastics exhibited an increasing trend from upstream to downstream. The predominant polymer types of microplastics identified are polyethylene (PE) and polypropylene (PP), with the majority being blue fibers 0-2 mm in size. In comparison to the Zhang River, the Fuyang River exhibits a higher diversity index of microplastics, with more varied and complex sources attributed to anthropogenic activities. The risk of microplastic pollution in the Zhang and Fuyang rivers was found to increase downstream. The spatial distribution of microplastics is influenced by both natural conditions and anthropogenic activities, with upstream areas dominated by natural factors and downstream areas dominated by human activities. This study provides a reference for understanding microplastic pollution levels and sources in urban rivers of Northern China.

Vertical Distribution and Multi-Source Pathways of Microplastics in Agricultural Soils: A Study of Typical Irrigation Areas in the Upper Yellow River Basin

Agricultural production inputs, irrigation water and atmospheric deposition are the primary sources of microplastics (MPs) in farmland soils. Irrigation exacerbates the vertical migration of MPs from surface soils to deeper aquifer, posing significant ecological and healthy risks to groundwater. However, most studies focused upon surface soils, with limited effort on the spatial distribution and influencing factors of MPs. This study compared forest and grassland soils in the upper Yellow River region, analyzed the vertical distribution of MPs across six soil layers (0-100 cm) under border and drip irrigation patterns. Additionally, the specific composition of MPs in atmospheric source in 1-year settling period, irrigation water, fertilizers, and seed coatings was investigated. The results showed that MPs were detected in all 0-100 cm soil layers, with significantly higher abundance in farmland soils (5,688.8 ± 609.38 items/kg) than in forest (2,387.05 ± 152.47 items/kg) and grassland (669.64 ± 131.83 items/kg) soils. The MPs abundance in farmland increased with prolonged plastic film mulching. Overall, MPs abundance decreased with soil depth, but accumulation occurred at 20-30 cm due to tillage and irrigation. The MPs abundance in the border-irrigated farmland (5,688.79 ± 1,497.11 items/kg) was twice that in the drip-irrigated farmland (2,744.44 ± 996.93 items/kg), indicating that border irrigation intensifies surface soil contamination and accelerates MPs migration to the deeper layers. The primary MPs components in farmland soils were PVC, PU, CPE, ACR, PE, EVA, FKM, PET and PTFE. PVC and PU mainly originated from fertilizers, seed coatings, irrigation water, and atmospheric deposition, while CPE, PI, PLA, and PSF were likely derived from the irrigation water and atmospheric deposition. In conclusion, the soil MPs mainly originated from atmospheric source, irrigation water and agricultural inputs. The MPs distribution was influenced by tillage intensity and irrigation practices. These findings provided a better understanding of the MPs distribution patterns and influencing factors, thereby aiding in development of effective pollution control strategies.

Colony complexity affects microplastic loads in Pocillopora corals

Microplastic (MP) pollution poses a significant threat to marine ecosystems. Coral reefs, often located near land-based sources of these pollutants, act as potential sinks due to their complex three-dimensional structures. While the interactions between reef-building corals and MPs have been increasingly investigated, the role of coral structural complexity in MP accumulation remains poorly understood. This study investigated the influence of coral structural complexity on MP trapping efficiency under natural conditions, specifically aiming to: I) quantify and characterize MPs trapped by Pocillopora corals, II) compare MP distribution across coral compartments (surface, tissue, and skeleton), and III) assess the relationship between seven metrics of coral complexity (i.e., S/V ratio, fractal dimension, compactness, convexity, sphericity, packing, and rugosity) and MP loads. Six Pocillopora sp. colonies, comprising 36 fragments, were sampled from a reef in Kāne'ohe Bay, Hawai'i. MPs were extracted from the coral surface, tissue, and skeleton for quantification and characterization using microscopy and FTIR spectroscopy. Coral complexity was assessed using photogrammetry and 3D scanning. MPs were found at an average of 0.029 ± 0.079 particles per g coral, mostly at the coral surface (61 %). Compact, thick-branched coral morphologies showed higher MP accumulation, likely due to increased formation of stagnant water regions and reduced turbulence. Our results demonstrate that coral complexity plays a significant role in MP deposition under natural conditions, with potential implications for coral health and the transfer of MPs to other reef sinks. This highlights the importance of considering coral morphological complexity when evaluating the risk of MP pollution.

Plastic pollution in mangrove ecosystems: A global meta-analysis

Mangrove ecosystems play a crucial role in blue carbon sequestration, coastal flood protection, and biodiversity conservation, while also serving as nursery habitats for threatened and economically important species. Due to their complex root structures, mangroves act as natural plastic traps, making them vulnerable to marine plastic contamination. In this study, we conducted a meta-analysis synthesising available global data on macroplastic and microplastic pollution in mangrove ecosystems, assessing their prevalence and the environmental partitioning of plastics both within and outside Marine Protected Areas (MPAs). We reviewed 44 primary studies and conducted statistical analyses to compare plastic abundance in the sediment, water, and biota. Our results show that mangrove ecosystems experience significant plastic pollution. Macroplastic abundance within the studied mangroves varied by five orders of magnitude, averaging 23.73 ± 8.80 items m-2, comparable to the highest levels recorded on beaches and underscoring the plastic-trapping capacity of mangroves. Mangroves globally had a mean contamination of 1122.98 ± 150.17 microplastics kg-1 in sediment and 16.00 ± 11.04 microplastics L-1 in seawater, both approximately double estimated safe limits. Our analyses found a 45.5 % reduction in microplastic within mangrove sediments and an 83.3 % reduction in macroplastic contamination in protected mangrove ecosystems. However, seawater microplastic levels were higher within MPAs, particularly near urbanized areas. These findings emphasize the need for integrated mitigation strategies that combine MPAs with targeted plastic waste reduction measures. Our analyses also highlight that the ecological impacts of this plastic accumulation within mangrove ecosystems remains a key knowledge gap.

Recent advances in the detection of microplastics in the aqueous environment by electrochemical sensors: A review

Microplastics (MPs), as an emerging contaminant, have become a serious threat to marine ecosystems due to their small size, widespread distribution and easy ingestion by organisms. Therefore, it is necessary to develop various analytical techniques to detect MPs in real water environment. Among these detection techniques, the advantages of electrochemical sensors, such as easy operation, high sensitivity and low cost, provide the possibility of online real-time detection of MPs in real water environment. The aim of this article is to analyze and compare the advantages and disadvantages of different MPs detection techniques. Compilation of various electrochemical sensors, we compiled various electrochemical sensors, evaluated the recent advances in carbon materials, metals and their oxides, biomass materials, composite materials, and microfluidic chips in electrochemical sensors for detecting MPs, and in-depth investigated their detection mechanisms and sensing performances, proposed hotspot nanomaterials for electrochemical sensors that could be used to detecting MPs and gave an outlook on the last years of electrochemical sensors in the area of microplastic detection. Finally, the challenges of electrochemical sensors for the detection of MPs are discussed and perspectives for this area are presented.

Distribution and retention efficiency of micro- and mesoplastics and heavy metals in mangrove, saltmarsh and cordgrass habitats along a subtropical coast

Understanding how coastal ecosystems mitigate pollution is essential due to their critical role in safeguarding environmental health, and supporting restoration efforts. This study, for the first time, evaluated the contamination levels and retention capacities of micro- and mesoplastics, and heavy metals across coastal habitats-specifically mangrove (MH), invasive Kikuyu grass (KH), and salt marsh cord grass (SH)-along a subtropical intertidal beach. Of the 120 sediment samples collected, 60 were analyzed for micro- and mesoplastics using wet peroxide oxidation and FTIR spectroscopy, while the remaining 60 were examined for heavy metal concentrations via ICP-MS. Results showed that KH habitats retained the highest plastics (153 ± 10.9 items/kg), followed by MH (112 ± 4.58 items/kg), SH (73.17 ± 6.81 items/kg), and NV (50.83 ± 10.87 items/kg) areas with significantly different retention in MH and KH habitats. Heavy metals followed a decreasing retention order of Mn > Zn > Cu > Cr > Pb > Ni > As > Cd > Hg. Significant difference was observed in Pb, Cr retention by an invasive Kikuyu grass (KH1) station, and Cu retention in two invasive Kikuyu grass stations (KH1 and KH3). However, in general no habitats were significantly different in retaining the metals. Principal Component Analysis and Canonical Correspondence Analysis revealed that micro- and mesoplastics were strongly associated with Zn, Cu, and Pb. KH habitats showed the highest retention efficiency, however, the associated toxicity risk increased with retention levels, indicating a higher risk in KH habitats compared to NV areas. The study highlighted Kikuyu grass habitats as both efficient pollutant sinks and potential ecological risk zones, emphasizing the need for targeted remediation to optimize retention while safeguarding ecosystem health.

Influence of anthropogenic pressures on the microplastic distribution in the riverine-estuarine environment: A source-apportioning approach

In this study, the influence of anthropogenic pressures, namely fishing practices and illicit and unregulated wastewater and solid waste discharge, on the microplastic distribution in India's Kallada River - Ashtamudi riverine-estuarine environment was investigated. To better characterize microplastic pollution in the Estuary, it was subdivided into cage farming, open fishing, solid waste dumping, and other zones that receive wastewater from residential areas. A source-apportioning approach was utilized to delineate the possible sources of pollution and conducted a risk assessment attributed to exposure to microplastic pollution. The results suggest that the solid waste dumping zone exhibited the highest microplastic abundance, followed by the cage farming zone. Fiber-shaped microplastic particles were abundant in cage farming and open fishing zones, while films dominated the solid waste dumping zone. FTIR analysis revealed that polyamide and polyester, widely used for regional fishing nets, were dominant in cage farming and open fishing zones, while polyamide, polystyrene, and polyethylene were dominant in solid waste dumping zones. Other zones impacted by the unregulated discharge of domestic wastewater exhibited an abundance of polyester and polyethylene microplastics. Source apportionment studies using a modified approach incorporating morphological and chemical characteristics of microplastics revealed that fishing nets/ropes contributed to 35.48 % of microplastic pollution, followed by single-use plastics and plastic bags/covers (19.35 % each), textile fabrics (16.13 %) and personal care products (9.68 %). A risk assessment analysis considering microplastic abundance and polymer hazard revealed that the solid waste dumping zone and the cage farming zone pose a medium risk to microplastic pollution. These findings highlight the role of fishing practices and solid waste dumping on the microplastic pollution in the riverine-estuarine environment.

Potential ecological risk of microplastics contamination to environment in protect area lakes

Microplastics (MPs) in freshwater have been extensively studied on a global scale. However, a deeper understanding is still required regarding the occurrence characteristics and ecological risks of MPs in protected area lakes(PAL). Here, the study investigated MPs pollution in PAL, outside protected areas lakes (OPAL), and ponds (OPAP) in the eastern Qinghai-Tibetan Plateau, and a comprehensive analysis was conducted comparing lakes or ponds from different income regions. The results showed that PAL has a single source of contamination, while OPAL and OPAP exhibited more diverse MP sources. The surface of all samples showed significant physicochemical changes like oxygen-containing functional groups and potential signs of biodegradation. Microbiome analysis identified potential plastic-degrading bacteria on MPs, which varied by polymer type. Ecological risk assessment revealed that OPAL and OPAP face higher ecological risks, particularly from polymers like PVC and PC, while PAL has low risk. However, we should also consider the environmental changes over the past 100 years of history in this region and emphasize the environmental health of PAL. Notably, MPs pollution is more severe in lower-middle-income regions, highlighting the urgent need for stricter controls.

Fate, source, and ecological risk of microplastic in the surface sediment of the Beibu Gulf, the Northern South China sea

A large-scale investigation of the surface sediments in the Beibu Gulf was conducted in this study to reveal the contamination characteristics of microplastics in the surface sediments of the Beibu Gulf. The results showed that the abundance of microplastics ranged from 12.91 to 251.69 items/kg, dry weigh (DW), with an average abundance of 84.34 ± 51.85 items/kg (DW). The highest abundance of microplastics was found in the estuary of northwestern Hainan, influenced by the West Guangdong Coastal Current. The overall distribution of abundance showed a decreasing trend from nearshore to offshore. Microplastics in the surface sediments were predominantly in the form of fiber (87.51%), with a predominant white color. The polymer of microplastics in surface sediment was primarily polyester (43.43%). The main sources of microplastics include household items, textile products, food packaging, fishing activities, industrial activities, sewage discharges, and biochemical materials, of which household products and textile products are the most important sources. The results of the risk evaluation showed that the sediment of Beibu Gulf was contaminated with microplastics (pollution load index >1) and the polymer risk was at low to extremely high levels. The high abundance of microplastics and highly toxic polymers resulted in increased ecological risk. These findings highlight the urgent need to implement timely and effective measures to reduce the impact of intensive human activities on microplastic pollution. At the same time, the study data provide an important reference for future ecotoxicological investigations, pollution management strategies and microplastic policy development.

Assessment of microplastics and associated ecological risk in the longest river (Godavari) of peninsular India: A comprehensive source-to-sink analysis in water, sediment and fish

Persistent microplastics (MPs) accumulation in the aqueous environments is considered a threat to the ecosystem, potentially harming aquatic species and human health. In view of the escalating problem of MPs pollution in India, a comprehensive investigation of MPs accumulation in major riverine systems is necessary. The current study aims to estimate MPs abundance in surface water, sediment, and fish samples along the entire stretch of Godavari, the largest river in peninsular India. Average MPs concentrations in water lie in the range of 311-939 MPs/m3 and 2-144 MPs/kg d.w. for sediment. Urban regions and dam reservoirs showed elevated MPs abundance, emphasizing the impact of anthropogenic activities. The μ-Raman analysis revealed PE and PP were the abundantly occurring polymers in all matrices. Polymer and ecological risk index identify most sampling sites as extremely high-risk zones, posing a potential threat to aquatic ecosystems and human health. Plotted t-SNE (t-distributed Stochastic Neighbour Embedding) revealed similarities in MPs morphology and compositions among water, sediment and fish samples. Examined MPs in edible (flesh+skin) and inedible parts (GIT and gills) of seven different fish species showed a higher average MPs abundance in edible parts (10.7 ± 14.9 MPs/fish) than gills (7 ± 8.1 MPs/fish) and GIT (6.6 ± 5.5 MPs/fish). This suggests that removing gills and GIT from fish doesn't eliminate the consumer's risk of MPs intake. Overall, our work highlights the significant MPs pollution in the Godavari River, further providing essential data on the ecological risk of MPs to guide municipal action plans, improve waste management, target high-risk areas, and raise awareness to mitigate impacts.

Microplastic characterization and factors influencing its abundance in coastal wetlands: insights from the world's largest mangrove ecosystem, Sundarbans

Water and sediment samples were collected from 20 sampling sites within two major river systems within the world's largest mangrove ecosystem. The primary objectives of the study were to determine MPs' abundance, composition, and potential ecological risks and to identify the factors influencing their distribution and characteristics. Results revealed MP abundances, ranging from 2 to 53 items/m3 in water and 17 to 177 items/kg in sediment. The most prevalent types of MPs were films, fragments, foams, and fibers, with the most abundant fragments. Transparent MPs of various colors, such as red, green, blue, white, and yellow, were commonly observed. Additionally, sizes of MPs ranged from < 0.5 to 5 mm, with particles < 0.5 mm dominating in water and 4-5 mm particles prevailing in sediment. Six major polymers were identified, including polystyrene (PS), polyamide (PA), Polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), and ethylene propylene diene monomer (EPDM), with PS being the most abundant in both river systems. Linear mixed effect models showed that factors, such as distance from Mongla port and water velocity impacted MP abundance in water, while distance from Mongla port, total organic carbon (TOC), and total phosphorus (TP) contents affected their distribution in sediment. The Shannon-Weaver Index revealed a higher MP diversity in the Shela River compared to the Pasur. Overall, the pollution load index (PLI) and polymeric hazard index (PHI) indicated that MPs impacted both river systems, but the finding from the ecological risk index (ERI) was negligible at the individual sites. Our study recommends the long-term monitoring of MP abundance and implementation of strict regulations to reduce MPs in aquatic environments and proposes various engineering and biotechnological approaches for effective MP remediation. Further research is needed to identify both point and non-point sources of MPs and develop comprehensive strategies and policies to mitigate plastic pollution in the mangrove ecosystem.

How does the tidal cycle influence the estuarine dynamics of microplastics?

Estuaries are the main pathway for the microplastics (MPs) to enter into the oceans. However, factors that drive river-sea transport of MPs are not yet fully understood. Therefore, our research investigated the influence of the tidal cycle on the abundance and characteristics of MPs in an urban estuary, through high-frequency sampling (every 2-3 h) using a plankton net (120 μm mesh size) in two seasons (rainy and dry seasons). The results showed that the abundance of MPs decreased during the ebb tide and increased during the flood tide. A positive correlation was found between MP abundance and water height in both seasons. The shapes and colors of MPs varied significantly throughout the tidal cycle. The results show that tides are key agents in the transfer of MPs and cannot be neglected in models of the global contribution of plastic pollution from rivers to oceans.

Microplastics in the surface waters of the northern South China Sea: Interannual variation and potential ecological risks

Microplastic pollution in marine environments has become a global concern due to its potential ecological risks. However, long-term data on microplastic distribution are scare, hindering the assessment of the ecological threats. This study monitored microplastics pollution in the surface water of the northern South China Sea from 2019 to 2023. The average abundance of microplastics exhibited an increasing trend from 2019 to 2021 and a subsequent decrease from 2021 to 2023 in both the Pearl River Estuary and Zhanjiang offshore waters. Conversely, a steady annual decrease was observed in the surface waters of Beibu Gulf from 2020 to 2023. The spatial variability of microplastic hotspot across different years and regions. Microplastics predominantly ranged from 1 to 2 mm in size, with fragments and fibers being the most common shapes and transparent and white colors being the most prevalent. The primary chemical components of microplastics were polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET). No significant inter-annual differences were observed in the physicochemical characteristics of microplastics. The pollution load index (PLI) indicated medium to low levels of microplastic pollution, with the potential ecological risk index (PERI) suggesting a low level of ecological risk, implying a minimal threat to the marine ecosystem. This study first revealed the annual variations in microplastic pollution and their potential ecological risks in the northern South China Sea, providing crucial data support for the future management and control of marine microplastic pollution.

Microplastic contamination and environmental risks in the Beas River, western Himalayas

The Western Himalayan mountains, with several riverine systems, are considered one of the most fragile environments in the world. Among them is Beas, a primary river that provides essential ecosystem benefits to thousands of indigenous people in North India. One of the major pollutants, microplastics (MPs), are ubiquitous contaminants, yet their occurrence in the Beas and ecological risk factors remain largely unexplored. Due to extensive tourism and urban-related burdens, the usage and release of enormous amounts of plastics and MPs into the Beas are apparent. Here, we investigated the extent of MPs pollution and subsequent environmental risks in water and sediments from Beas along a stretch of 300 km. Our results showed that MPs were abundant and widely distributed, with the abundance range (mean ± SE) being 46-222 (112.27 ± 12.43) items/L in water and 36-896 (319.47 ± 49.25) items/kg in sediment samples. We found significant differences in MPs' abundance in water but not sediments among the five sampling sites. There was a significant positive correlation between population size and the abundance of MPs, with the highest abundance in populated Kullu and the lowest loads at the remote Dhundi Glacier. Fibers and film were common morphotypes; most items measured <1 mm. Of the eleven polymers identified, the majority were polyethylene. The pollution load index ranged up to 4.99 (low-risk category); however, the polymer hazard index exceeded 1000 (highest-risk category), and the potential ecological risk index was 13,761 (extreme-risk category) at selected sites. This study fills a crucial knowledge gap and raises concerns about the possible impact on human health, as many riparian residents depend on Beas as their primary source of potable water. Our findings may assist governmental agencies in formulating comprehensive eco-friendly policies and advancing environmentally sustainable strategies in vulnerable locales adjoining the Beas waterway.

Interaction and bacterial effects of microplastics pollution on heavy metals in hyporheic sediments of different land-use types in the Beiluo River Basin

Microplastics (MPs) pollution is ubiquitous, causing serious ecological damage by threatening the growth and health of living organisms. This study investigated the vertical and horizontal distribution of MPs, MPs-heavy metals (MPs-HMs) accumulation, contamination assessment and microbial biodiversity in hyporheic sediments of different land-use types. MPs abundance in shallow sediments (0-30 cm) was significantly higher than that in deep sediments (30-60 cm), with fewer large MPs in the deep sediments. Blue, fiber, and <500 μm were the dominant MPs types, and polystyrene, polylactic acid, and polyvinyl chloride were the dominant polymers in the Beiluo River Basin. The average concentrations of HMs detected in MPs were all much higher than the same metals in the sediments. The pollution loading index of MPs was higher in areas with a greater proportion of anthropogenic land use, and MP-HM were present to varying degrees in the vertical distribution (PN > 1). Critically, bacterial diversity of anthropogenic land use was smaller than that of natural land use. High MP-HM concentrations reduced the abundance of cyanobacteria, nitrospirota, acidobacteriota, and planctomycetota, whereas desulfobacterota, chloroflexi, myxococcota, actinobacteriota, and proteobacteria have developed tolerance to MP-HM. Overall, our findings contribute to the understanding of the relationship between different land-use types and the spatial distribution of MPs and MP-HM, which is critical to manage and mitigate the hyporheic zone pollution.

Assessing the external atmospheric input of microplastics: Two strategies based on polymer composition and aging characteristics

Microplastics (MPs) can be transported over long distances in the environment, hence, distinguishing between MPs generated locally and those introduced from external sources is necessary for regional MP pollution management. In this study, MPs pollution in the dust of Siziwang banner (Sizi), a sparsely populated area on the Mongolian Plateau, and Hohhot, a city with large populations, was observed. The high proportion of small MPs in Sizi (<25 μm), combined with the fact that most air masses reaching the area have undergone long-distance transport, supports the presence of external input through atmosphere. Based on the significantly different composition distributions and surface characteristics of the small sized MPs in Sizi and Hohhot, a composition-based Bray-Curtis similarity index (Comp-BCs) and a carbonyl index-based BCs index (CI-BCs) were established. Contributions of the external MPs input to small MPs in Sizi were estimated as 23-36 %, indicating that the role of atmospheric input on MPs pollution in sparsely populated areas should not be overlooked.

Presence of microplastics during high rainfall events in the Cauvery River (South India): Ecological risk and cultural practices

Rivers directly support the development of a region/country; however, globally, these aquatic regions are impacted by recent human activity. During a rainfall event, we monitored the baseline information on the spatial variability of microplastics (MPs) in the Cauvery River in South India. Forty surface water samples from two selected sites were collected between 27 September and 16 October 2022 during the commencement of monsoon which indicates 69 and 43 pieces L-1 of MPs, respectively. SEM and FTIR analysis on the surface morphotypes (cracks, grooves, pits) and elemental (Si, Ti, Mg, Cu, Ta) presence/adsorption of these elements' (in particle) surface indicates surface deformation of fibers, which is mainly due to external input/forces. Fragments of polymers establish a high degree of deterioration indicating its longer trajectory in the aquatic environment. The origin of extended fiber ranges between 631.65 and 5639.9 µm, which is being associated with laundry activities for textiles, household items, and fishing gear. Toxicity and ecological risk assessment suggest significant degree of weathered MPs due to photo-oxidation process and aging owing to exposition of intense UV light. This research serves as a strong illustration of the multiple pressures from urban development and cultural practices that have a bigger influence on the river ecosystem like Cauvery River and regular monitoring.

Microplastic pollution in tropical coral reef ecosystems from the coastal South China Sea and their impacts on corals in situ

Coral reefs possess extremely high ecological value in tropical and subtropical waters worldwide. Microplastics as emerging and pervasive pollutants pose a great threat to the health of coral ecosystems. However, in situ studies on microplastics pollution and its impacts in coral ecosystems globally are limited. The occurrence characteristics of microplastics in the environment mediums and reef-dwelling organisms were investigated in coral reef areas from the southern Hainan Island, and the impacts of microplastics on corals in situ were evaluated in this study. Average microplastics abundance was 9.48 items L-1 in seawater, 190.00 items kg-1 in sediment, 0.36 items g-1 in coral, 1.50 items g-1 in shellfish, 0.48 items g-1 in fish gill, and 1.71 items g-1 in fish gastrointestinal tract. The prevalent microplastics in the above samples were characterized as being less than 1000 µm in size, fibrous, and transparent, with predominant polymer types as polyethylene terephthalate, polypropylene, polyethylene, and rayon. The microplastic enrichment capacity of different corals varied (Pocillopora > Acropora > Sinularia). Notably, microplastics were more abundant on the surface of corals compared to their interiors, with distinct characteristics observed, including larger-sized (>500 µm) and fiber-shaped polyethylene terephthalate microplastics on the surface and smaller-sized (20-200 µm) fragmented polyethylene microplastics within coral interiors. Furthermore, the investigation showed species-specific impacts of microplastics on corals in situ, including photosynthetic activity of photosymbionts and antioxidant and immune activities of corals. Furthermore, the ecological risks of microplastics were minor across most environmental media in the studied areas, with exceptions in the bottom seawater and surface sediment of YLW, which exhibited extreme and medium risk levels, respectively. Coral risk levels were generally medium, except for dangerous levels in DDH and high levels in LHT. The potential sources of microplastics in the marginal reefs of southern Hainan Island were primarily tourism, residential, and fishing activities.

Occurrence and characteristics of microplastics across the watershed of the world's third-largest river

While rivers as primary conduits for land-based plastic particles transferring to their "ultimate" destination, the ocean, have garnered increasing attention, research on microplastic pollution at the scale of whole large river basins remains limited. Here we conducted a large-scale investigation of microplastic contamination in water and sediment of the world's third-largest river, the Yangtze River. We found concentrations of microplastics in water and sediment to be 5.13 items/L and 113.9 items/kg (dry weight), respectively. Moreover, microplastic pollution levels exhibited a clear decreasing trend from upstream to downstream. The detected microplastics were predominantly transparent in color, with fibrous shapes predominating, sizes mainly concentrated below 1 mm and composed primarily of PP and PE polymers. Our analysis results indicated that compared to geographical and water quality parameters, anthropogenic factors primarily determined the spatial distribution pattern of microplastics. Moreover, the microplastic abundance in sediment upstream of the dam was significantly higher than that in the downstream sediment, while the trend of microplastic concentrations in water was opposite. Therefore, more effort is needed to monitor microplastic contamination and their ecological environmental effects of sediment before dams in future research.

Co-occurrence of microplastics and microparticles containing Cu and Zn and other heavy metals in sea-surface microlayer in Osaka Bay, Japan

Antifouling biocides such as Cu, Zn, and organic compounds not only inhibit adhesion of sessile organisms on ship hull but also possess toxicity to non-sessile organisms in marine environment. Thus, we firstly investigated the heavy metals and polymer types of anthropogenic microparticles (MPs) floating in the sea-surface microlayer (S-SML) in Osaka Bay. 7 types of MPs containing different metals (Cu, Cu-Zn, Zn, Ti, Sn, Ba and Fe-Mn-Ni) were found. The polymer type for 97.8 % of Cu and Cu-Zn MPs (41 samples) and 52.6 % of Zn MPs (19 samples) was acrylic resins which are widely used as binders in contemporary antifouling paints for ships; concentrations of 511-54,000 mg/kg for Cu and 95.1-13,200 mg/kg for Zn were found in these MPs. The high metal concentrations found the co-existence of acrylic polymers point towards an origin from antifouling paint particles (APPs). Furthermore, to quantify Cu and Zn concentrations in these MPs based on X-ray fluorescence spectroscopy (μ-XRF), calibration curves obtained from standard paint particles containing different Cu and Zn concentrations and different particle sizes made with similar matrix used in commercial antifouling paint were firstly established, according to which highly reliable Cu and Zn concentrations in MPs were obtained.

Abundance of microplastics and its ecological risk assessment in coral reef regions of Peninsular Malaysia

Microplastic contamination is an emerging concern in marine ecosystems, with limited knowledge on its impact on coral reefs, particularly in Malaysia. Surface waters were collected from several coral reef regions in Peninsular Malaysia by towing a plankton net behind the boat. Microplastics were detected at all sites, with a mean abundance of 0.344 ± 0.457 MP/m3. Perhentian Islands (0.683 ± 0.647 MP/m3) had significantly higher microplastic levels than Tioman Island (0.108 ± 0.063 MP/m3), likely due to oceanographic differences. Over half of the microplastics (55.7 %) were small microplastics (<1 mm), with the 0.05-0.5 mm size class being most abundant (29.2 %). Fragments and fibres dominated, and black, blue, and green were the prevalent colours. Polyethylene (PE), rayon (RY), chlorinated polyethylene (CPE), and polypropylene (PP) were the most common polymers. This study reveals the abundance and characteristics of microplastics, provides important data for further research on microplastics in coral reef ecosystem.

Delving into South China Sea microplastic pollution: Abundance, composition, and environmental risk

Understanding marine pollution in the South China Sea is crucial for preserving marine ecosystems and biodiversity. Despite extensive research on pollutants, there is a significant gap in knowledge about microplastics (MPs) in the archipelago region. This study focused on four typical islands, examining MPs in seawater and sediments, their distribution, and environmental risks. Most MPs (>90 %) were smaller than 2.5 mm, with black fiber-shaped polyethylene terephthalate MPs being predominant. MPs in seawater had lower abundance (5-12 items/L) compared to sediment (100-2600 items/kg) but showed richer polymer composition. Pollution load index (PLI) and risk index analysis indicated all regions were contaminated (PLI > 1), with the Zhongsha islands being the most polluted. Correlation analysis highlighted black, fibrous PET-like polymers with large particle sizes (>0.5 mm) as major contributors. This study could help to understand the MPs distribution and pollution in the archipelago region of the South China Sea.

Seasonal variations in microplastics in a coastal wetland in southwest India as well as their risks to Sillago sihama and Gerres filamentosus

Microplastics are minute plastic particles ranging from 1 µm to 5 mm in size. Mangroves are crucial ecosystems with roles in carbon sequestration, shoreline protection, and habitat for diverse species. Despite their significance, the extent of microplastic pollution in mangroves, especially in India, remains inadequately understood. To address this gap, we conducted a seasonal sampling in the Kota mangrove ecosystem at different water column depths. Our analysis revealed average microplastic abundances of 0.93 (monsoon), 3.71 (post-monsoon), and 2.92 MPs/L (pre-monsoon). The average microplastic abundances were 19.88 and 15.86 microplastics/individual for Gerres filamentosus and Sillago sihama, respectively. Fibrous microplastics smaller than 1 mm were dominant. Transparent microplastics dominated the water column (28.57% in monsoon, 77.45% in post-monsoon, and 49.24% in pre-monsoon), and they were also prevalent in S. sihama (49.55%) and G. filamentosus (41.51%). This points towards greater bioavailability and suggests that transparent microplastics are often mistaken for prey. Anthropogenic influence is a major factor that governs microplastic distribution than season in Kota mangroves. Fourier transform infrared spectroscopy revealed that polypropylene was the dominant polymer in both water column as well as in S. sihama and G. filamentosus. We identified aquaculture, tourism, and local activities as probable sources of microplastic pollution. The monitoring data is crucial as it provides insights into microplastics pollution in two economically important fish species that are largely consumed by the local population. Exposure to microplastics from the consumption of these fish may cause serious health issues for human beings.

Diversity but not abundance of ingested plastics changes with ontogenetic dietary shift: Stable isotope insights into plastic contamination in a mesopelagic predator longnose lancetfish Alepisaurus ferox

We employed Fourier infrared spectroscopy, laser infrared technology, and stable isotope analysis to investigate the relationships between characteristics of ingested plastics and size-related feeding ecology of a mesopelagic predator, longnose lancetfish Alepisaurus ferox. Plastics were detected in 81.48 % of specimens, up to 8.81 ± 8.29 items/individual and 0.59 ± 0.66 items/g wet weight of intestine, and were sized 20.00 μm to 6.50 cm. The majority were granules and fragments in shape, and polystyrene and acrylate copolymer in polymer type. The diversity indices exhibited a correlation with trophic position and body size groups, emphasizing that the ontogenetic dietary shift of A. ferox may influence the diversity of plastics ingested. This study provides new insights into the plastic pathways linking epipelagic and mesopelagic food webs and demonstrates that biochemical ecological tracers can effectively indicate the bioavailability of plastic correlated with growth in mesopelagic predator.

Low incidence of microplastics in coral reefs of Kāne'ohe Bay, Hawai'i, USA

This study investigated microplastic and other micro-debris pollution in sediment, seawater, sea cucumbers, and corals from fringing and patch reefs in Kāne'ohe Bay, O'ahu, Hawai'i, USA. Microplastic pollution in Kāne'ohe Bay Bay was low compared to other tropical coral reefs. Microplastics were detected in sediments (29 %), sea cucumbers (9 %), and coral (0-2 %) samples but were not quantifiable. Seawater had quantifiable microplastic (< 0.5 mm) and macroplastic (> 0.5 mm) pollution, with mean concentrations ranging from 0.0061 to 0.081 particles m-3. Most particles detected in seawater samples were larger, floating plastic debris consisting mostly of polyethylene, polypropylene fragments, and fibers. Across the other matrices, the most detected particles were polyester, polypropylene, and cotton fibers. These results provide baseline data for this important coral reef ecosystem, and further monitoring is recommended to understand the seasonal and long-term trends in microplastic pollution and its potential future impacts.

Impact of COVID-19 pandemic on microplastic occurrence in aquatic environments: A three-year study in Taihu Lake Basin, China

The impact of the Coronavirus Disease 2019 (COVID-19) pandemic on microplastic (MP) occurrence in aquatic environments deserves an in-depth study. In this study, the occurrence of MPs and environmental flux of plastics before (2019) and during (2020 and 2021) the pandemic were comparatively investigated in various aquatic compartments in the Taihu Lake Basin in China. The field-based investigations from 2019 to 2021 for Taihu Lake have shown that, at the onset of the outbreak, the MP abundance declined at a rate of 62.3 %, but gradually recovered to the pre-pandemic level. However, the amount of plastics being released into aquatic environments showed a declining trend in 2020 and 2021 compared to those in 2019, with decrease rates of 13.7 % and 15.8 %, respectively. Characterization analysis of MP particles and source apportionment framework implied that while the contributions of tire abrasion and domestic waste to MP occurrence were depleted owing to the reduction in human activity during the pandemic, weathering and fragmentation of retained plastics contributed to the recovery of stored MPs. This study provides insights into the anthropogenic influences on MP occurrence, and supports policymakers in managing and controlling plastic contamination in large freshwater systems in the "new normal" phase.

Contributions from typical sources to microplastics in surface water of a semiarid urban river

Urban regions are suggested to be the main source of microplastic pollution in rivers. Thus, we investigated the spatiotemporal distribution of microplastics in the surface water of the Lanzhou section of the Yellow River in a semiarid region and the contributions of typical sources. The average concentration of microplastics in the surface water of the river was 0.98 particles (p) L-1. The daily quantity flux and mass flux were 3.63 × 109 p d-1 and 95.38 kg d-1, respectively. Most of the microplastics in the river were fibers and fragments, composed of polyethylene terephthalate, polyamide, polypropylene and polyethylene. A large quantity and mass of microplastics were found in the high-flow period of the river. The hotspots of microplastic pollution were residential and tourist reaches. The spatial distribution of microplastics was influenced by anthropogenic factors. However, the main factor influencing the temporal distribution of microplastics was precipitation seasonality. Most of the microplastics in the surface water originated from drainage ditches. The direct contribution of microplastics from atmospheric deposition was also considerable. Our results suggest that the contribution of microplastics from atmospheric deposition to urban rivers is worthy of attention.

Seasonal variability of microplastic contamination in marine fishes of the state of Gujarat, India

Seasonal variation in microplastics abundance, occurrence, and distribution in pelagic and demersal fishes was observed in this study during December 2021 to November 2022. One hundred percent presence of microplastic in inedible (gut and gills) tissue, while 82% and 54% in edible tissue (muscle) of pelagic and demersal fishes respectively were seen. Post-monsoon period showed high prevalence of microplastics followed by monsoon and the least during pre-monsoon in both pelagic and demersal fishes. In pelagic fishes, the edible tissue had microplastics abundance of 1.56 to 13.34 numbers per 10 g of tissue whereas inedible tissue had 3.36 to 16.67 numbers per 10 g of tissue. In demersal fishes, the edible tissue had microplastics abundance of 1.04 to 5.26 numbers per 10 g of tissue while it was 2.67 to 8.34 numbers per 10 g of inedible tissue. There was significant variation in abundance of microplastic in edible and inedible tissue of all the fishes (Mann-Whitney test, p < 0.05). The most dominant microplastics size was 0.005-0.05 mm followed by 0.05-0.5 mm and the least of greater than 0.5 mm in pelagic and demersal fishes respectively. Taking microplastic shape into consideration, the most dominant was fiber followed by fragment and the film in inedible tissue of all the fishes. The edible tissue of all the fishes had only fiber in them (100% occurrence). The dominance of blue color microplastics was observed followed by red, green, yellow, and orange at least in edible as well as inedible tissues of the fishes. More than 99% microplastics polymer observed in this study include polyethylene (PE), polypropylene (PP), and polystyrene (PS); only less than 1% was unidentified. This is the first study done on seasonal variation of microplastic in the marine fish population of Gujarat waters, Northeast Arabian Sea. The study highlights the nature of micro-pollutant in marine environments, emphasizing the need for comprehensive monitoring and management strategies.

Heterogenization of microplastic communities in lakes of the Qinghai-Tibetan Plateau driven by tourism and transport activities

The Qinghai-Tibetan Plateau has a booming tourism industry and an increasingly sophisticated road system. There is a paucity of studies quantifying the contributions of anthropogenic and natural factors to microplastic pollution in remote plateau areas. In this study, water and sediment samples were collected from eight lake tourist attractions and four remote lakes in northern and southern regions of the Qinghai-Tibetan Plateau. Microplastics were detected in all samples, with a mean abundance of 0.78 items/L in water and 44.98 items/kg in sediment. The abundance of microplastics in the study area was lower than previously observed in more populated areas of China. Small-sized (<1 mm and 1-2 mm), fiber, and transparent microplastics were predominant, with polyethylene and polypropylene microplastics as the primary polymer types. The compositions of microplastic communities indicated that tourism and road networks were the major sources of microplastics in the lakes. Distance-decay models revealed greater influence of environmental distances on microplastic community similarity than geographic distance. Compared to climate factors, urban spatial impact intensity and traffic flow impact played a leading role in the structuring of microplastic communities in lake water and sediment. Our findings provide novel quantitative insights into the role of various factors in shaping the distribution patterns of microplastic communities in plateau lakes.

Unraveling the characteristics of microplastics in agricultural soils upon long-term organic fertilizer application: A comprehensive study using diversity indices

Microplastics negatively impact soil health and productivity. Organic fertilizers constitute significant contributors of microplastics in agricultural soils. Nevertheless, comprehensive data on the diversity of microplastics in long-term fertilized soils remain unavailable. In this study, we assessed the presence of microplastics in soils subjected to application of three different organic fertilizers (pig manure, chicken manure, and sludge composts) over 12 years, and evaluated the potential ecological risks posed by microplastic accumulation. The average microplastic abundance in soil was 368.88 ± 207.97 (range: 90-910) items/kg. Microplastic abundance differed among fertilization treatments, with substantial increases of 16.67%, 71.67%, and 61.43% upon low to high application of the three treatments, respectively. Overall, the microplastics predominantly comprised fibers (70.94%) and fragments (25.25%), of which a substantial proportion constituted light-colored microplastics (transparent and white). The size of microplastics was mainly concentrated in the 1-2 mm range (39.96%), with rayon, polypropylene, polyester, and polyethylene being identified as the major types. The risk assessment indices of the three treatments were 229.38, 257.64, and 175.89, respectively, and were all classified as level 4 (high risk). The microplastic diversity integrated index and principal component analysis revealed that microplastics were uniformly distributed throughout the 0-20 cm soil depth consequent to tillage activity. Together, these findings provide a comprehensive assessment of microplastic pollution in long-term fertilized soils and serve as a scientific basis for reducing microplastic contamination in agricultural soils.

Microplastics associated with stranded macroalgae on an impacted estuarine beach, Rio de Janeiro, Brazil

Microplastics (MPs) are contaminants widely distributed in marine ecosystems. Only few studies approached MP interactions with marine plants, which are considered potential traps for MPs. Here, we determined MPs' densities and types associated with stranded macroalgae on a eutrophic beach in Guanabara Bay. Our results showed that red algae exhibited higher MP densities (1.48 MPs g-1), possibly due to their more branched thalli, than green algae (0.27 MPs g-1). The predominant MP types were blue and white fragments <3 mm in size and polymers were classified as polyethylene and polyvinyl chloride in fragments, and polypropylene in fibers. The higher densities of MPs in algae seemed to be influenced by the inner bay waters. The densities of MPs associated with algae from Guanabara Bay surpassed those reported in other studies. High MPs densities increase the chances that organisms associated with algae entangle or ingest MPs, impacting their health and survival.

Changes in characteristics and risk of freshwater microplastics under global warming

Microplastics present a significant threat to freshwater ecosystems. However, the impact of global warming on their characteristics and associated risks remains uncertain. This study collected 2793 sample sites from literature and datasets to create a new risk assessment and rank methodology, known as the Multi-characteristics Potential Ecological Risk Index (MPERI), which incorporates various microplastic characteristics, such as concentration, size distribution, color, shape, and polymer diversity. Using regression random forest models (RRF), this study predicted that a 10 °C increase would raise microplastic concentration from 12,465.34 ± 68,603.87 to 13,387.17 ± 60,692.96 particles/m3. The percentage of small-size microplastics initially decreased (from 69.10 % to 68.72 %) and then increased (from 68.72 % to 68.78 %), while the diversity of color, shape, and polymer decreased by 0.29 %, 3.24 %, and 0.17 %, respectively. Furthermore, global warming could increase the rank of microplastic risks from high (405.25 ± 528.9) to dangerous (535.37 ± 582.03) based on the MPERI method. Most countries would experience an increase in risk values, with Indonesia and Vietnam transitioning from low to medium risk, and China and Malaysia transitioning from high to dangerous risk. The feature importance assessment of the RRF model indicated that concentration was the most influential variable in determining the change in risk values. While other microplastic characteristics had a lesser impact compared to concentration, they still influenced the risk ranking. This study highlights the role of global warming in shaping microplastic risks.

Deciphering morphology patterns of environmental microfibers: Insights into source apportionment

Microfibers, a prevalent form of microplastics, undergo diverse environmental interactions resulting in varied morphological changes. These changes can offer insights into their environmental trajectories. Despite its importance, comprehensive studies on microfiber morphology are scarce. This study collected 233 microfibers from the East China Sea and South China Sea. Based on morphological features observed in microscopic images of microfibers, such as curvature, cross-sectional shapes, diameter variations, and crack shapes, we identified a general morphological pattern, classifying the environmental microfibers into three distinct morphological types. Our findings highlight noticeable differences in morphological metrics (e.g., length, diameter, and surface roughness) across three types, especially the diameter. Microfibers of Type I had an average diameter of 19.45 ± 4.93 μm, significantly smaller than Type II (263.00 ± 75.15 μm) and Type III (299.68 ± 85.62 μm). Within the three-dimensional (3D) space fully defined by these quantitative parameters, the clustering results of microfibers are also consistent with the proposed morphology pattern, with each category showing a potential correlation with specific chemical compositions. Type I microfibers correspond to synthetic cellulose, while 94.79 % of Types II and III are composed of polymers. Notably, we also validated the great applicability of the morphology categories to microfibers in diverse environmental compartments, including water and sediments in nearshore and offshore areas. This classification aids in the efficient determination of microfiber sources and the assessment of their ecological risks, marking a significant advancement in microfiber environmental studies.

Occurrence, potential sources, and ecological risk assessment of microplastics in the inland river basins in Northern China

Microplastics (MPs) are the pollutants, found widely across various environmental media. However, studies on the MP pollution in urban rivers and the necessary risk assessments remain limited. In this study, the abundance and characteristics of microplastics in a typical urban river were examined to evaluate their distribution, sources, and ecological risks. It was observed that the abundance of MPs in sediments (220-2840 items·kg-1 dry weight (DW)) was much higher than that in surface water (2.9-10.3 items·L-1), indicating that the sediment is the "sink" of river MPs. Surface water and sediment were dominated by small particle size MPs (< 0.5 mm). Fiber and debris were common shapes of MPs in rivers and sediments. The microplastics in river water and sediments were primarily white and transparent, respectively. Polypropylene (PP) and polyethylene (PE) were the major polymers found.

Effect of Polystyrene Microplastics on Pb(II) Adsorption onto a Loessial Soil (Sierozem) and Its Mechanism

Microplastics (MPs) have received significant attention recently. However, their influence on soil heavy metal adsorption remains unclear. The effect of polystyrene (PS) MPs on the adsorption of Pb(II) onto a loessial soil (sierozem) was studied by batch experiments in single soil (S), soil with 1 mm PS (S-PS1), and soil with 100 μm PS (S-PS100) systems. The mechanisms of Pb(II) adsorption reduction were investigated. The adsorption of Pb(II) reached equilibrium within 12 h, and the pseudo-second-order model fitted the adsorption processes best. The Langmuir adsorption model provided a better fit to the isotherms, compared to the Freundlich one. The presence of PS decreased the level of adsorption of Pb(II). Larger PS particle size, dose, and fulvic acid (FA) concentration inhibited Pb(II) adsorption onto the soil. The solution pH value showed a positive correlation with the adsorption amount. The adsorption amounts (q e) of Pb(II) in binary metal systems (Cu-Pb and Cd-Pb) were lower than those in single Pb systems, indicating the competitive adsorption among the ions. The adsorption amount presented a trend of S > S-PS100 > S-PS1. The primary mechanism on which PS reduced the adsorption of Pb(II) was the "dilution effect" of MPs. Conclusively, the presence of MPs might elevate the availability of heavy metals by reducing the soil's adsorption capacity for them and then amplifying the risk of heavy metal contamination and migration.

Occurrence of microplastics in the Haima cold seep area of the South China Sea

The pollution of deep-sea microplastics has received increasing attention. As a special ecosystem in the deep sea, the cold seep area is of great significance for studying the distribution of microplastics in the deep sea. In this work, the distribution and characteristics of microplastics in seawater, sediments, and shellfish in the Haima cold seep area and the correlation between the characteristics of microplastics in different media and the type of media were studied. Microplastics were found in all three media. The abundance of microplastics in different samples from the Haima cold seep area ranged 1.8-3.8 items/L for the seawater, 11.47-96.8 items/kg (d.w.) for the surface sediments, and 0-5 items/individual (0-0.714 items/g) for the shellfish. The amount of microplastics ingested by shellfish varied among different species. The microplastics in these three media were mainly fibrous, dark-colored, small-sized rayon, polyethylene terephthalate (PET), and polyethylene (PE). In the correlation analysis of microplastic characteristics among the three media, it was found that the characteristics of microplastics in different media in the same area were closely related, and each pair of variables showed a significant positive correlation (P ≤ 0.05). The distinctive geographical conditions would accelerate the interchange of microplastics among various media. Principal component analysis showed that habitat contribute to microplastic feature differences in shellfish. Differences in correlation were observed between the characteristics of shellfish microplastics in different regions and the characteristics of microplastics in surrounding seawater and sediments.

Pollution characteristics and prospective risk of microplastics in the Zhengzhou section of Yellow River, China

The ubiquitous occurrence of microplastics (MPs) in the freshwater has attracted widespread attention. The Zhengzhou section of the Yellow River was the most prosperous region in ancient China, and the rapid urbanization, industrialization, and agricultural practices contributed to MPs pollution in aquatic systems recently, whereas the contamination status of MPs in the area is still not available. In this study, a total of fourteen sampling cross-sections were selected in the region to collect water samples systematically for the analysis of MPs pollution characteristics and potential risks. Results showed that abundance of MPs in the water were ranged from 2.33 to 15.50 n/L, with an average value of 6.40 ± 3.40 n/L, which was higher than it in other inland rivers from China. Moreover, the MPs of 0.5-2 mm were the dominant sizes in Yellow River of Zhengzhou region, and most of them were black fibres. The top three polymers were Polyethylene terephthalate (PET), Polyamide (PA) and Polypropylene (PP). High diversity indices of MPs observed at S3, S4, S5, S6, S7, and S8 for size, colour, polymer and shape indicated diverse and complex sources of MPs in those cross-sections. The MPs in water from Zhengzhou area of Yellow River probably degraded from textiles, fishing net, plastic bags, mulching film, packaging bags, and tire wear. The chemical risk assessment revealed a level III risk for study area, while S8 and S11 in which PVA or PAN with higher hazard score detected were categorised as class V risk. Coincidentally, probabilistic risk assessment showed a considerable ecological risk of MPs from Yellow River in Zhengzhou City, with possibility of 99.48 and 98.01 % adverse effect for food dilution and translocation-mediated mechanism, respectively. The results are expected to assistance for development of policies and ultimately combating MPs pollution.

Fragmented marine plastics as the prevalent litter type on a small island beach in the Adriatic

The issue of plastic pollution has dramatically intensified in the recent years. Our study investigates extensive plastic contamination of a sandy beach on a small Adriatic island. The beach was sampled on three occasions, in 2013, 2020 and 2022, using 1 m2 quadrats placed along the lower and upper strandlines, resulting in average litter concentrations of 385 ± 106, 1095 ± 522 and 129 ± 37 item m-2, respectively. The lower size limit of collected litter was 1 mm, thus including large microplastics. Plastic fragments (49-74 %) and plastic pellets (15 %-37 %) were predominant litter categories. The proportion of fragments is significantly higher during the tourist season with a more intensive cleaning regime (April-October), as opposed to the off-season (November-March). Fisheries and aquaculture litter was identified as a relevant source of pollution. More research is needed in the future into the microplastics smaller than 1 mm.

The Effects of Rainfall Events on the Composition and Diversity of Microplastics on Beaches in Xiamen City on a Short-Term Scale

Coastal beaches are vulnerable to microplastic pollution originating primarily from terrestrial and marine sources or the in situ weathering of plastic waste. The present study investigates the effects of rainfall events on the composition and diversity of microplastics on beaches in Xiamen City on a short-term scale. In the results, the quantity of microplastics in beach sediments was 245.83 ± 11.61 items·kg-1 (mean ± standard error). The abundance of microplastics did not differ after each rainfall event but significantly decreased after multiple rainfall events. When the diversity of microplastics in the coastal area was evaluated, the Shannon-Wiener index and Pielou's index also decreased from 3.12 and 0.64 to 2.99 and 0.62, respectively, after multiple rainfall events. Rainfall had varying effects on microplastics depending on their size and shape, with particles smaller than 500 μm experiencing pronounced reductions. There was a significant negative correlation between the abundance of microplastics and the grain size of sand, but a positive correlation with sediment moisture content. We encourage the consideration of the potential impact of rainfall events during sample collection to ensure the reliability of the data. We also recommend using diversity indexes to help in understanding the influence of physical processes on microplastic distribution and their mechanisms.

Landscape and risk assessment of microplastic contamination in farmed oysters and seawater along the coastline of China

Microplastic (MP) pollution poses a significant threat to marine ecosystem and seafood safety. However, comprehensive and comparable assessments of MP profiles and their ecological and health in Chinese farming oysters are lacking. This study utilized laser infrared imaging spectrometer (LDIR) to quantify MPs in oysters and its farming seawater at 18 sites along Chinese coastlines. Results revealed a total of 3492 MPs in farmed oysters and seawater, representing 34 MP types, with 20-100 µm MP fragments being the dominant. Polyurethane (PU) emerged as the predominant MP type in oysters, while polysulfones were more commonly detected in seawater. Notably, oysters from the Bohai Sea exhibited a higher abundance of MPs (13.62 ± 2.02 items/g) and estimated daily microplastic intake (EDI, 2.14 ± 0.26 items/g/kg·bw/day), indicating a greater potential health risk in the area. Meanwhile, seawater from the Yellow Sea displayed a higher level (193.0 ± 110.7 items/L), indicating a greater ecological risk in this region. Given the pervasiveness and abundance of PU and its high correlation with other MP types, we proposed PU as a promising indicator for monitoring and assessing the risk MP pollution in mariculture in China. These findings provide valuable insights into the extent and characteristics of MP pollution in farmed oysters and seawater in China.

The distribution of sediment microplastics assemblages is driven by location and hydrodynamics, not sediment characteristics, in the Gulf of Maine, USA

Microplastics (MP) are found in marine sediments across the globe, but we are just beginning to understand their spatial distribution and assemblages. In this study, we quantified MP in Gulf of Maine, USA sediments. MP were extracted from 20 sediment samples, followed by polymer identification using Raman spectroscopy. We detected 27 polymer types and 1929 MP kg-1 wet sediment, on average. Statistical analyses showed that habitat, hydrodynamics, and station proximity were more important drivers of MP assemblages than land use or sediment characteristics. Stations closer to one another were more similar in their MP assemblages, tidal rivers had higher numbers of unique plastic polymers than open water or embayment stations, and stations closer to shore had higher numbers of MP. There was little evidence of relationships between MP assemblages and land use, sediment texture, total organic carbon, or contaminants.

Tire plastic and road-wear particles on Yujing Expressway in the restoration area of Mu Us Sandy Land: Occurrence characteristics and ecological risk screening

Tire plastic and road-wear particles (TPR-WP) are a current research priority as one of the main environmental sources of microplastics. We selected a unique land use type - desert restoration area, collected soil and dust samples from the Yujing Expressway and its service areas, and analyzed TPR-WP abundance, type, size and morphology by laser direct infrared (LDIR). The abundance of TPR-WP in expressway dust (14,446.87 ± 10,234.24 n/kg) was higher than that in soil (7500 ± 3253.64 n/kg). Random forest model showed that the source of TPR-WP was highly correlated with economic factors and natural climate. Overall, the proportion of small and medium-sized TPR-WP in dust was higher than soil, more than half of the TPR-WP in dust were in 20 - 50 µm range. The proportion of small particle size TPR-WP increased with the rise of elevation. The pollution load index suggested that the survey region was generally at level I risk zone, while the ecological risk index indicated that the pollution level of expressway was III and IV, and the service area was IV. In general, the study was of great significance for clarifying the distribution and risk of TPR-WP in soil and dust of expressways and service areas.

Microplastics: A potential proxy for tracing extreme flood events in estuarine environments

The transport of microplastics (MPs) is susceptible to being influenced by catchment hydrology; however, there is a notable lack of research on their retention and responses to flood events in estuarine sedimentary records. Herein, we collected two cores in the Yangtze Estuary to explore their microplastic pollution, influencing factors and linkage to flood events. MP abundance exhibited a decreasing trend from the top to the bottom in both cores. Both plastic production and sediment mean grain size showed a significant positive correlation with MP abundance. The sedimentary record displayed a marked surge in MP abundance during the extreme flood period, suggesting a direct influence of flooding on MP deposition. The resuspension of upstream MPs and erosion of land-based MPs by heavy rain might be responsible for this increase. Furthermore, our study identified significant periodicities in MP abundance, closely aligned with the hydrological patterns of the Yangtze River. This study highlights the role of floods in fluvial MP distribution and proposes MPs as a proxy of extreme floods from the 20th century in estuarine environments.

From pollution to solutions: Insights into the sources, transport and management of plastic debris in pristine and urban rivers

River systems are important recipients of environmental plastic pollution and have become key pathways for the transfer of mismanaged waste from the land to the ocean. Understanding the sources and fate of plastic debris, including plastic litter (>5 mm) and microplastics (MPs) (<5 mm), entering different riverine systems is essential to mitigate the ongoing environmental plastic pollution crisis. We comprehensively investigated the plastic pollution in the catchments of two rivers in the Yangtze River basin: an urban river, the Suzhou section of the Beijing-Hangzhou Grand Canal (SZ); and a pristine rural river, the Jingmen section of the Hanjiang River (JM). The abundance of plastic pollutants in SZ was significantly higher than in JM: 0.430 ± 0.450 items/m3 and 0.003 ± 0.003 items/m3 of plastic litter in the water; 23.47 ± 25.53 n/m3 and 2.78 ± 1.55 n/m3 MPs in the water; and 218.82 ± 77.40 items/kg and 5.30 ± 1.99 items/kg of MPs in the sediment, respectively. Plastic litter and MPs were closely correlated in abundance and polymer composition. Overall, the polymer type, shape and color of MPs were dominant by polypropylene (42.5%), fragment (60.4%) and transparent (40.0%), respectively. Source tracing analysis revealed that packaging, shipping, and wastewater were the primary sources of plastic pollutants. The mantel analysis indicated that socio-economic and geospatial factors play crucial roles in driving the hotspot formation of plastic pollution in river networks. The composition of the MP communities differed significantly between the sediments and the overlying water. The urban riverbed sediments had a more pronounced pollutant 'sink' effect compared with the pristine rivers. These findings suggested that the modification of natural streams during urbanization may influence the transport and fate of plastic pollutants in them. Our results offer pivotal insights into effective preventive measures.

Incidence of microplastic translocation in freshwater fish eggs

The issue of microplastic contamination in seafood is progressively recognised as a significant global issue. This study presents novel findings regarding the detection of microplastics within the eggs of commercially available fish intended for consumption by humans. Eggs of Ompok bimaculatus, Heteropneustes fossilis, Mystus vittatus and Anabas testudineus collected from the Periyar River, Kerala, India were subjected to analysis for the potential presence of microplastics. Out of the 91 fishes (containing eggs) examined, microplastics were observed in the eggs of 2 species, i.e., Ompok bimaculatus and Mystus vittatus. The polymers recorded were polyethylene and polypropylene. Fish eggs are commonly consumed by humans and are highly esteemed as a delectable food. Considering the widespread consumption of fish eggs as a delicacy among humans, there exists a potential route for human exposure to microplastics, which raises concerns regarding public health.