Impacts of microplastics on organotins' photodegradation in aquatic environments

Polylactic acid microplastics before and after aging induced neurotoxicity in zebrafish by disrupting the microbiota-gut-brain axis

Polylactic acid (PLA) is a biodegradable alternative to traditional plastics due to its excellent biocompatibility. However, PLA is challenging to fully degrade and can easily become microplastics (MPs) in surface water, a process accompanied by aging. This study found that aged PLA (APLA) MPs exhibited increased surface roughness, decreased surface potential, and more oxygen-containing functional groups compared to PLA. Acute exposure to PLA/APLA in zebrafish larvae resulted in sluggish behavior and inhibited neuronal development. Chronic exposure to PLA/APLA in adult zebrafish led to reduced exploratory behavior, poor memory, increased aggression, and neuron loss. Overall, PLA/APLA induced dose-dependent neurotoxicity, with APLA exhibiting greater toxicity than PLA, potentially due to its higher rate of uptake. Additionally, exposure to PLA/APLA led to thinning of the intestinal wall, shortening of villi, and suppression of intestinal neurotransmitter levels, accompanied by alterations in microbial abundance and gut dysbiosis. Meanwhile, supplementation with bile acid, considered as the key regulator in the gut-brain axis, significantly mitigated the neurotoxicity induced by PLA/APLA. These findings confirm that PLA/APLA MPs indeed elicit neurotoxicity via the gut-brain axis and provide scientific evidence for targeted environmental interventions to minimize the adverse ecological impacts of biodegradable MPs.

Constructed wetlands combined with microbial fuel cells (CW-MFCs) as a sustainable technology for leachate treatment and power generation

The physical and chemical treatment processes of leachate are not only costly but can also possibly produce harmful by products. Constructed wetlands (CW) has been considered a promising alternative technology for leachate treatment due to less demand for energy, economic, ecological benefits, and simplicity of operations. Various trends and approaches for the application of CW for leachate treatment have been discussed in this review along with offering an informatics peek of the recent innovative developments in CW technology and its perspectives. In addition, coupling CW with microbial fuel cells (MFCs) has proven to produce renewable energy (electricity) while treating contaminants in leachate wastewaters (CW-MFC). The combination of CW-MFC is a promising bio electrochemical that plays symbiotic among plant microorganisms in the rhizosphere of an aquatic plant that convert sun electricity is transformed into bioelectricity with the aid of using the formation of radical secretions, as endogenous substrates, and microbial activity. Several researchers study and try to find out the application of CW-MFC for leachate treatment, along with this system and performance. Several key elements for the advancement of CW-MFC technology such as bioelectricity, reactor configurations, plant species, and electrode materials, has been comprehensively discussed and future research directions were suggested for further improving the performance. Overall, CW-MFC may offer an eco-friendly approach to protecting the aquatic environment and come with built-in advantages for visual appeal and animal habitats using natural materials such as gravel, soil, electroactive bacteria, and plants under controlled condition.

Accelerated Solar-Driven Polyolefin Degradation via Self-Activated Hydroxy-Rich ZnIn2S4

Degradation of polyolefin (PE) plastic by a traditional chemical method requires a high pressure and a high temperature but generates complex products. Here, sulfur vacancy-rich ZnIn2S4 and hydroxy-rich ZnIn2S4 were rationally fabricated to realize photocatalytic degradation of PE in an aqueous solution under mild conditions. The results reveal that the optimized photocatalyst could degrade PE into CO2 and CO, and PE had a weight loss of 84.5% after reaction for 60 h. Systematic experiments confirm that the synergetic effect of hydroxyl groups and S vacancies contributes to improve the photocatalytic degradation properties of plastic wastes. In-depth investigation illustrates that the active radicals attack (h+ and •OH) weak spots (C-H and C-C bonds) of the PE chain to form CO2, which is further selectively photoreduced to CO. Multimodule synergistic tandem catalysis can further improve the utilization value of plastic wastes; for example, product CO2/CO in the plastic degradation process can be converted in situ into HCOOH by coupling with electrocatalytic technology.

Intrinsic Peroxidase-like Activity of Polystyrene Nanoplastics Mediates Oxidative Stress

Nanoplastics represent a global environmental concern due to their ubiquitous presence and potential adverse impacts on public and environmental health. There is a growing need to advance the mechanistic understanding of their reactivity as they interact with biological and environmental systems. Herein, for the first time, we report that polystyrene nanoplastics (PSNPs) have intrinsic peroxidase-like activity and are able to mediate oxidative stress. The peroxidase-like activity is dependent on temperature and pH, with a maximum at pH 4.5 and 40 °C. The catalytic activity exhibits saturation kinetics, as described by the Michaelis-Menten model. The peroxidase-like activity of PSNPs is attributed to their ability to mediate electron transfer from peroxidase substrates to H2O2. Ozone-induced PSNP aging can introduce oxygen-containing groups and disrupt aromatic structures on the nanoplastic surface. While ozonation initially enhances peroxidase-like activity by increasing oxygen-containing groups without degrading many aromatic structures, extended ozonation destroys aromatic structures, significantly reducing this activity. The peroxidase-like activity of PSNPs can mediate oxidative stress, which is generally positively correlated with their aromatic structures, as suggested by the ascorbic acid assay. These results help explain the reported oxidative stress exerted by nanoplastics and provide novel insights into their environmental and public health implications.

Investigation of the photolysis process of benzo(a)anthracene (BaA) on polyvinyl chloride (PVC) and polystyrene (PS) microplastics: Plastics aging effect, transformation products and toxicity assessment

Microplastics (MPs) and persistent pollutants (POPs) are new pollutants that are extensively studied worldwide. To fill the gaps that the degradation processes and mechanisms of polycyclic aromatic hydrocarbons (PAHs) on the surface of most MPs are still unclear, the photochemical transformation of benzo(a)anthracene (BaA) on polyvinyl chloride (PVC) MPs and polystyrene (PS) MPs in water were investigated and compared. The photolysis of BaA on the surface of PS in water proceeded easier than that on PVC within the 48 h irradiation period, with the pseudo-first-order rate constant of 0.0489 min-1 and 0.0181 min-1, respectively, which can be ascribed to the smaller particle size and more OH production of PS MPs. Due to the light competition between the chromophore and BaA as well as the light-shielding effect, aged MPs showed an inhibitory effect on the degradation of BaA compared with pristine MPs. For BaA/PVC MPs system, the degradation of BaA in real water was not significantly affected by coexisting ions and humic acid (HA) (p < 0.05), while slight inhibitory effect on the degradation of BaA appeared for PS MPs in different water matrices (UP: 86.97 %, YR: 84.47 %, PR: 81.42 % and HR: 83.21 %). According to the electron paramagnetic resonance (EPR) test, quenching experiment and probe experiment, the relative contribution of direct photolysis (PVC: 82.02 %; PS: 69.54 %) and indirect photolysis (PVC: 17.98 %; PS: 30.46 %) was confirmed. A total of 14 products were identified, and the product types were not affected by plastics aging. The results of the toxicity assessment indicated that although some intermediate products remained toxic to aquatic organisms, the toxicity of most products was lower than that of BaA. This study provides new insights into the environmental fate of PAHs and the role of MPs in the photolysis process of contaminants in surface water.

When antibiotics encounter microplastics in aquatic environments: Interaction, combined toxicity, and risk assessments

Antibiotics and microplastics (MPs), known as emerging pollutants, are bound to coexist in aquatic environments due to their widespread distribution and prolonged persistence. To date, few systematic summaries are available for the interaction between MPs and antibiotics in aquatic ecosystems, and a comprehensive reanalysis of their combined toxicity is also needed. Based on the collected published data, we have analyzed the source and distribution of MPs and antibiotics in global aquatic environments, finding their coexistence occurs in a lot of study sites. Accordingly, the presence of MPs can directly alter the environmental behavior of antibiotics. The main influencing factors of interaction between antibiotics and MPs have been summarized in terms of the characteristics of MPs and antibiotics, as well as the environmental factors. Then, we have conducted a meta-analysis to evaluate the combined toxicity of antibiotics and MPs on aquatic organisms and the related toxicity indicators, suggesting a significant adverse effect on algae, and inapparent on fish and daphnia. Finally, the environmental risk assessments for antibiotics and MPs were discussed, but unfortunately the standardized methodology for the risk assessment of MPs is still challenging, let alone assessment for their combined toxicity. This review provides insights into the interactions and environment risks of antibiotics and MPs in the aquatic environment, and suggests perspectives for future research.

Microplastics and PAHs mixed contamination: An in-depth review on the sources, co-occurrence, and fate in marine ecosystems

Microplastics (MPs) and polycyclic aromatic hydrocarbons (PAHs) are toxic contaminants that have been found in marine ecosystems. This review aims to explore the sources and mechanisms of PAHs and MPs mixed contamination in marine environments. Understanding the released sources of PAHs and MPs is crucial for proposing appropriate regulations on the release of these contaminants. Additionally, the mechanisms of co-occurrence and the role of MPs in distributing PAHs in marine ecosystems were investigated in detail. Moreover, the chemical affinity between PAHs and MPs was proposed, highlighting the potential mechanisms that lead to their persistence in marine ecosystems. Moreover, we delve into the various factors influencing the co-occurrence, chemical affinity, and distribution of mixed contaminants in marine ecosystems. These factors, including environmental characteristics, MPs properties, PAHs molecular weight and hydrophobicity, and microbial interactions, were critically examined. The co-contamination raises concerns about the potential synergistic effects on their degradation and toxicity. Interesting, few studies have reported the enhanced photodegradation and biodegradation of contaminants under mixed contamination compared to their individual remediation. However, currently, the remediation strategies reported for PAHs and MPs mixed contamination are scarce and limited. While there have been some initiatives to remove PAHs and MPs individually, there is a lack of research specifically targeting the removal of mixed contaminants. This deficiency highlights the need for further investigation and the development of effective remediation approaches for the efficient remediation of PAHs and MPs from marine ecosystems.

Interactive impacts of photoaged micro(nano)plastics and co-occurring chemicals in the environment

In the environment, sunlight or ultraviolet (UV) radiation is considered to be the primary cause of plastic aging, leading to their fragmentation into particles, including micro(nano)plastics (MNPs). Photoaged MNPs possess diverse interactive properties and ecotoxicological implications substantially different from those of pristine plastic particles. This review aims to highlight the mechanisms and implications of UV-induced photoaging of MNPs, with an emphasis on various UV sources and their interactions with co-occurring organic and inorganic chemicals, as well as the associated ecological and health impacts and factors affecting those interactions. Compared to UV-B, UV-A and UV-C were more widely used in laboratory studies for MNP degradation. Photoaged MNPs act as vectors for the transportation of organic pollutants, organic matter, and inorganic chemicals in the environment. Literature showed that photoaged MNPs exhibit a higher sorption capacity for PPCPs, PAHs, PBDEs, pesticides, humic acid, fulvic acid, heavy metals, and metallic nanoparticles than pristine MNPs, potentially causing significant changes in associated ecological and health impacts. Combined exposure to photoaged MNPs and organic and inorganic pollutants significantly altered mortality rate, decreased growth rate, histological alterations, neurological impairments, reproductive toxicity, induced oxidative stress, thyroid disruption, hepatotoxicity, and genotoxicity in vivo, both in aquatic and terrestrial organisms. Limited studies were reported in vitro and found decreased cellular growth and survival, induced oxidative stress, and compromised the permeability and integrity of the cell membrane. In addition, several environmental factors (temperature, organic matter, ionic strength, time, and pH), MNP properties (polymer types, sizes, surface area, shapes, colour, and concentration), and chemical properties (pollutant type, concentration, and physiochemical properties) can influence the photoaging of MNPs and associated impacts. Lastly, the research gaps and prospects of MNP photoaging and associated implications were also summarized. Future research should focus on the photoaging of MNPs under environmentally relevant conditions, exploiting the polydisperse characteristics of environmental plastics, to make this process more realistic for mitigating plastic pollution.

Catalytic and biocatalytic degradation of microplastics

In recent years, there has been a surge in annual plastic production, which has contributed to growing environmental challenges, particularly in the form of microplastics. Effective management of plastic and microplastic waste has become a critical concern, necessitating innovative strategies to address its impact on ecosystems and human health. In this context, catalytic degradation of microplastics emerges as a pivotal approach that holds significant promise for mitigating the persistent effects of plastic pollution. In this article, we critically explored the current state of catalytic degradation of microplastics and discussed the definition of degradation, characterization methods for degradation products, and the criteria for standard sample preparation. Moreover, the significance and effectiveness of various catalytic entities, including enzymes, transition metal ions (for the Fenton reaction), nanozymes, and microorganisms are summarized. Finally, a few key issues and future perspectives regarding the catalytic degradation of microplastics are proposed.

From organic fertilizer to the soils: What happens to the microplastics? A critical review

In recent, soil microplastic pollution arising from organic fertilizers has been of a great increasing concern. In response to this concern, this review presents a comprehensive analysis of the occurrence and evolution of microplastics in organic fertilizers, their ingress into the soil, and the subsequent impacts. Organic fertilizers are primarily derived from solid organic waste generated by anthropocentric activities including urban (daily-life, municipal wastes and sludge), agricultural (manure, straw), and industrial (like food industrial waste etc.) processes. In order to produce organic fertilizer, the organic solid wastes are generally treated by aerobic composting or anaerobic digestion. Currently, microplastics have been widely detected in the raw materials and products of organic fertilizer. During the process of converting organic solid waste materials into fertilizer, intense oxidation, hydrolysis, and microbial actions significantly alter the physical, chemical, and surface biofilm properties of the plastics. After the organic fertilizer application, the abundances of microplastics significantly increased in the soil. Additionally, the degradation of these microplastics often promotes the adsorption of organic pollutants and affects their retention time in the soil. These microplastics, covered by biofilms, also significantly alter soil ecology due to the unique properties of the biofilm. Furthermore, the biofilms also play a role in the degradation of microplastics in the soil environment. This review offers a new perspective on the soil environmental processes involving microplastics from organic fertilizer sources and highlights the challenges associated with further research on organic fertilizers and microplastics.

Differential photodegradation processes of adsorbed polychlorinated biphenyls on biochar colloids with various pyrolysis temperatures

Despite the crucial role of photodegradation in the environmental transformation of organic pollutants, the photodegradation process of organic pollutants irreversibly absorbed on biochar colloids (BCCs) remains poorly understood. This study investigated the photodegradation processes and mechanisms of 2,4,4'-trichlorobiphenyl (PCB28) adsorbed on BCCs released from bulk biochars derived from bamboo chips at pyrolysis temperatures of 300, 500, and 700 °C. Results show that BCCs-adsorbed PCB28 could be degraded under simulated solar illumination (95-105 mW·cm-2) but at decreased photodegradation rates compared to the dissolved PCB28. The inhibition effect of BCCs on the PCB28 photodegradation increased with increasing pyrolysis temperature. After adsorptive binding to BCCs, the half-life of PCB28 (0.1 mg/L) was prolonged from 2.65 h for the dissolved PCB28 alone in deionized water to 7.48, 40.67, and 81.82 h in the presence of BCC300, BCC500, and BCC700 (5.0 mg/L), respectively. Mechanistically, the photodegradation of adsorbed pollutants was regulated by the photogenerated free radicals and surface functional groups of the low-temperature BCCs, as well as the defects and direct electron transfer capabilities of the high-temperature BCCs; PCB28 adsorbed on the low-temperature BCCs accepted electrons from persistent free radicals under light illumination, which led to PCB28 dechlorination, followed by ring-opening oxidation through hydroxyl radical attack, ultimately resulting in progressive mineralization; singlet oxygen caused preferential ring opening of adsorbed PCB28 on the high-temperature BCCs, preceding dechlorination. The photodegradation of BCCs-adsorbed PCB28 remained significant though more or less being inhibited under the effects of water pH, ionic strength, dissolved organic matters (humic acid and fulvic acid), and in natural water samples. These findings contribute to a better understanding of the structural properties of BCCs that impact phototransformation processes of adsorbed pollutants and facilitate an accurate assessment of the environmental risk associated with biochar application.

Interfacial interactions of polyethylene terephthalate microplastics and malachite green, tetracycline in aqueous environments

Polyethylene terephthalate microplastics (PET-MPs) are one of pivotal nondegradable emerging pollutant. Here the variation of the surface physicochemical characteristics of PET-MPs with UV irradiation aging and the adsorption behaviors of PET-MPs in malachite green (MG), tetracycline (TC) solution and the effect of coexisting Cu(II) were comparatively investigated. The yellowing, weakened hydrophobicity, and increased surface negative charge, crystallinity degree and oxygen-containing functional groups were manifested specifically by the aged PET-MPs. Different from the single system, the hydrophobic interaction and metal ion bridging complexation dominated the adsorption of MG and TC, respectively, in the binary solution. While in the ternary solution, cationic ion competition of Cu(II) with MG decreased its capture, and the formation of PET-Cu(II)-TC ternary complexes promoted TC adsorption. Moreover, PET-MPs could serve as an efficient vector for MG and TC in MG/TC/Cu(II) ternary system, indicating PET-MPs tend to carry more varieties in the complex environment, that may increase the environmental risk of PET-MPs.

Polystyrene microplastics enhance oxidative dissolution but suppress the aquatic acute toxicity of a commercial cadmium yellow pigment under simulated irradiation

Commercial cadmium yellow (CdS) pigment widely coexist with microplastics (MPs) in surface water, thus it is important to understand how MPs affect CdS pigment stability and toxicity under irradiation. Herein, the dissolution of CdS pigment (krelease = 0.118 h-1) under irradiation was visibly increased to 0.144 h-1 by polystyrene (PS) MPs, due to reactive species generation such as 1O2, •OH and 3PS* , while O2•- was unimportant to this process. The O2, humic acid, photoaging status of PS MPs could promote PS MPs-related CdS pigment dissolution rate by modifying reactive species generation. However, the CO32-, PO43- and alkaline condition significantly decreased the dissolution rate to 0.091, 0.053 and 0.094 h-1, respectively, through modifying free Cd2+ stability. Comparably, PS MPs-related CdS pigment dissolution was relatively slow in natural water samples (krelease = 0.075 h-1). PS MPs at environmental concentration can also promote CdS pigment dissolution and Cd2+ release, but suppress acute toxicity of CdS pigment to zebrafish larvae as increasing 10 h survival from 65% to 85% by adsorbing the Cd2+ and decreasing Cd2+ bioavailability. This study emphasized the environmental risks and human safety of CdS pigment should be carefully evaluated in the presence of PS MPs in aquatic environments.

Micro(nano)plastics in marine medaka: Entry pathways and cardiotoxicity with triphenyltin

The simultaneous presence of micro(nano)plastics (MNPs) and pollutants represents a prevalent environmental challenge that necessitates understanding their combined impact on toxicity. This study examined the distribution of 5 μm (PS-MP5) and 50 nm (PS-NP50) polystyrene plastic particles during the early developmental stages of marine medaka (Oryzias melastigma) and assessed their combined toxicity with triphenyltin (TPT). Results showed that 2 mg/L PS-MP5 and PS-NP50 could adhere to the embryo surface. PS-NP50 can passively enter the larvae and accumulate predominantly in the intestine and head, while PS-MP5 cannot. Nonetheless, both types can be actively ingested by the larvae and distributed in the intestine. 2 mg/L PS-MNPs enhance the acute toxicity of TPT. Interestingly, high concentrations of PS-NP50 (20 mg/L) diminish the acute toxicity of TPT due to their sedimentation properties and interactions with TPT. 200 μg/L PS-MNPs and 200 ng/L TPT affect complement and coagulation cascade pathways and cardiac development of medaka larvae. PS-MNPs exacerbate TPT-induced cardiotoxicity, with PS-NP50 exhibiting stronger effects than PS-MP5, which may be related to the higher adsorption capacity of NPs to TPT and their ability to enter the embryos before hatching. This study elucidates the distribution of MNPs during the early developmental stages of marine medaka and their effects on TPT toxicity, offering a theoretical foundation for the ecological risk assessment of MNPs.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

Interactions between microplastics and contaminants: A review focusing on the effect of aging process

Microplastics (MPs) in the environment are a major global concern due to their persistent nature and wide distribution. The aging of MPs is influenced by several processes including photodegradation, thermal degradation, biodegradation and mechanical fragmentation, which affect their interaction with contaminants. This comprehensive review aims to summarize the aging process of MPs and the factors that impact their aging, and to discuss the effects of aging on the interaction of MPs with contaminants. A range of characterization methods that can effectively elucidate the mechanistic processes of these interactions are outlined. The rate and extent of MPs aging are influenced by their physicochemical properties and other environmental factors, which ultimately affect the adsorption and aggregation of aged MPs with environmental contaminants. Pollutants such as heavy metals, organic matter and microorganisms have a tendency to accumulate on MPs through adsorption and the interactions between them impact their environmental behavior. Aging enhances the specific surface area and oxygen-containing functional groups of MPs, thereby affecting the mechanism of interaction between MPs and contaminants. To obtain a more comprehensive understanding of how aging affects the interactions, this review also provides an overview of the mechanisms by which MPs interact with contaminants. In the future, there should be further in-depth studies of the potential hazards of aged MPs in different environments e.g., soil, sediment, aquatic environment, and effects of their interaction with environmental pollutants on human health and ecology.

Combined effect of microplastic and triphenyltin: Insights from the gut-brain axis

Microplastics (MPs), an emerging group of pollutants, not only have direct toxic effects on aquatic organisms but also cause combined toxicity by absorbing other pollutants. Triphenyltin (TPT), one of the most widely used organotin compounds, has adverse effects on aquatic organisms. However, little is known about the combined toxicity of MPs and TPT to aquatic organisms. To investigate the individual and combined toxicity of MPs and TPT, we selected the common carp (Cyprinus carpio) for a 42-day exposure experiment. Based on the environmental concentrations in a heavily polluted area, the experimental concentrations of MPs and TPT were set at 0.5 mg L-1 and 1 μg L-1, respectively. The effects of MPs combined with TPT on the carp gut-brain axis were evaluated by detecting gut physiology and biochemical parameters, gut microbial 16S rRNA, and brain transcriptome sequencing. Our results suggest that a single TPT caused lipid metabolism disorder and a single MP induced immunosuppression in carp. When MPs were combined with TPT, the involvement of TPT amplified the immunotoxic effect induced by MPs. In this study, we also explored the gut-brain axis relationship of carp immunosuppression, providing new insights for assessing the combined toxicity of MPs and TPT. At the same time, our study provides a theoretical basis for evaluating the coexistence risk of MPs and TPT in the aquatic environment.

Fate and environmental behaviors of microplastics through the lens of free radical

Microplastics (MPs), as plastics with a size of less than 5 mm, are ubiquitously present in the environment and become an increasing environmental concern. The fate and environmental behavior of MPs are significantly influenced by the presence of free radicals. Free radicals can cause surface breakage, chemical release, change in crystallinity and hydrophilicity, and aggregation of MPs. On the other hand, the generation of free radicals with a high concentration and oxidation potential can effectively degrade MPs. There is a limited review article to bridge the fate and environmental behaviors of MP with free radicals and their reactions. This paper reviews the sources, types, detection methods, generation mechanisms, and influencing factors of free radicals affecting the environmental processes of MPs, the environmental effects of MPs controlled by free radicals, and the degradation strategies of MPs based on free radical-associated technologies. Moreover, this review elaborates on the limitations of the current research and provides ideas for future research on the interactions between MPs and free radicals to better explain their environmental impacts and control their risks. This article aims to keep the reader abreast of the latest development in the fate and environmental behaviors of MP with free radicals and their reactions and to bridge free radical chemistry with MP control methodology.

Recent advances towards micro(nano)plastics research in wetland ecosystems: A systematic review on sources, removal, and ecological impacts

In recent years, microplastics/nanoplastics (MPs/NPs) have received substantial attention worldwide owing to their wide applications, persistence, and potential risks. Wetland systems are considered to be an important "sink" for MPs/NPs, which can have potential ecological and environmental effects on the ecosystem. This paper provides a comprehensive and systematic review of the sources and characteristics of MPs/NPs in wetland ecosystems, together with a detailed analysis of MP/NP removal and associated mechanisms in wetland systems. In addition, the eco-toxicological effects of MPs/NPs in wetland ecosystems, including plant, animal, and microbial responses, were reviewed with a focus on changes in the microbial community relevant to pollutant removal. The effects of MPs/NPs exposure on conventional pollutant removal by wetland systems and their greenhouse gas emissions are also discussed. Finally, current knowledge gaps and future recommendations are presented, including the ecological impact of exposure to various MPs/NPs on wetland ecosystems and the ecological risks of MPs/NPs associated with the migration of different contaminants and antibiotic resistance genes. This work will facilitate a better understanding of the sources, characteristics, and environmental and ecological impacts of MPs/NPs in wetland ecosystems, and provide a new perspective to promote development in this field.

Antibiotic sorption onto microplastics in water: A critical review of the factors, mechanisms and implications

Microplastics as vectors for contaminants in the environment is becoming a topic of public interest. Microplastics have been found to actively adsorb heavy metals, per-fluorinated alkyl substances (PFAS), polychlorinated biphenyls (PCBs), polyaromatic hydrocarbons (PAHs), pharmaceuticals and personal care products (PPCPs) and polybrominated diethers (PBDs) onto their surface. Particular interest in microplastics capacity to adsorb antibiotics needs further attention due to the potential role this interaction plays on antibiotic resistance. Antibiotic sorption experiments have been documented in the literature, but the data has not yet been critically reviewed. This review aims to comprehensively assess the factors that affect antibiotic sorption onto microplastics. It is recognised that the physico- chemical properties of the polymers, the antibiotic chemical properties, and the properties of the solution all play a crucial role in the antibiotic sorption capacity of microplastics. Weathering of microplastics was found to increase the antibiotic sorption capacity by up to 171%. An increase in solution salinity was found to decrease the sorption of antibiotics onto microplastics, in some instances by 100%. pH also has a substantial effect on sorption capacity, illustrating the significance of electrostatic interactions on the sorption of antibiotics onto microplastics. The need for a uniform experimental design when testing antibiotic sorption is highlighted to remove inconsistencies in the data currently presented. Current literature examines the link between antibiotic sorption and antibiotic resistance, however, further studies are still required to fully understand this emerging global crisis.

Characteristics and behaviors of microplastics undergoing photoaging and Advanced Oxidation Processes (AOPs) initiated aging

The fact that 94% of microplastics (MPs) ubiquitous in the environment are subject to natural weathering makes the aging study currently a research hotspot. This review summarized the physicochemical characteristics of MPs undergoing natural and artificial aging and evaluated current analytical methods used in aging studies. Besides, the differences in photoaging and aging induced by advanced oxidation processes (AOPs) were discussed, leading to a conclusion that AOPs composed of oxidant and ultraviolet (UV) irradiation can better facilitate the alteration of MPs compared to UV irradiation alone. In addition, the environmental behavior of aged MPs was outlined and their adsorption properties for organics and metals were highlighted as a result of combined effects of hydrophobic, π-π, diffusion, and hydrogen bond interaction. Furthermore, the mechanisms of photoaging and AOPs-initiated aging were analyzed, mainly the role of reactive oxygen species (ROS) and environmentally persistent free radicals (EPFRs). Finally, the applications of two-dimensional correlation spectroscopy (2D-COS) and three-dimensional fluorescence spectra using excitation emission matrix-parallel factor analysis (EEM-PARAFAC) were discussed for the aging process analysis. This overview plays an important role in explaining the aging characteristics of MPs and provides a theoretical foundation for further investigations into their toxicity and removal.

Insight into the photodegradation and universal interactive products of 2,2',4,4'-tetrabromodiphenyl ether on three microplastics

The transformation process of contaminants on microplastics (MPs) exposed to sunlight has attracted increasing attention. However, the interactions between them are typically disregarded; therefore, this work investigated the photodegradation of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) on three MPs (polystyrene (PS), polypropylene (PP) and polyethylene (PE)) and the interactions between these two. The inhibition of aged PS on the elimination of BDE-47 was due to light shielding, while aged PP and PE increased the degradation rate. More hydroxyl radicals (HO•) was detected in the PS system, which resulted in the higher degradation rate of BDE-47 on PS. A total of 33 different products were identified and four reaction pathways were presented, and the reaction mechanisms mainly included debromination, hydroxylation, carbon-oxygen-bond breaking and interactive reactions. The Ecological Structure Activity Relationship (ECOSAR) and Toxicity Estimation Software Tool (TEST) programs were used to evaluate the toxicity of reaction products, and the results indicated that even though BDE-47 was the most toxic, the interaction products were still toxic or harmful to aquatic organisms. This study provides significant information on the photodegradation of contaminants on common microplastics and their interaction, which cannot be ignored.

Polystyrene microplastics reduce Cr(VI) and decrease its aquatic toxicity under simulated sunlight

Microplastics (MPs) serve as vectors for chromium (Cr), influencing its fate and toxicity in aquatic environments, and have attracted much attention recently. However, it is still unknown whether MPs mediate Cr species transformation under sunlight irradiation. This study confirmed that polystyrene (PS) MPs could reduce Cr(VI) to Cr(III) under sunlight irradiation, with a photoreduction rate constant of 0.0023 h^-1. PS MPs-mediated Cr(VI) reduction was predominantly dependent on O₂^•- and simultaneously suppressed by ¹O₂, •OH and ³PS* . Aged PS MPs were exposed to simulated sunlight irradiation for 0, 200, 500, and 800 h, and Cr(VI) reduction was hindered by increased ¹O₂ and •OH formation and light-screening effects (decreased photon absorption). The size, functional groups and concentration of PS MPs and environmental factors (e.g., humic acid, pH, Mg²⁺, Fe³⁺ and O₂) strongly affected Cr(VI) reduction. Furthermore, Cr(VI) reduction induced by PS MPs could occur in reservoir water, and the reduction rate was faster than that in double distilled (DD) water. Correspondingly, PS MPs (1 mg/L) decreased the oxidative stress induced by Cr(VI) to Lemna minor in reservoir water after 96 h of sunlight irradiation. This study provided deep insight into how PS MPs affect Cr species transformations and hazardous effects in realistic aquatic environments under sunlight conditions.

Endocrine Disrupting Chemicals in Polycystic Ovary Syndrome: The Relevant Role of the Theca and Granulosa Cells in the Pathogenesis of the Ovarian Dysfunction

Polycystic ovary syndrome (PCOS) is the most common heterogeneous endocrine disorder among women of reproductive age. The pathogenesis of PCOS remains elusive; however, there is evidence suggesting the potential contribution of genetic interactions or predispositions combined with environmental factors. Among these, endocrine disrupting chemicals (EDCs) have been proposed to potentially contribute to the etiology of PCOS. Granulosa and theca cells are known to cooperate to maintain ovarian function, and any disturbance can lead to endocrine disorders, such as PCOS. This article provides a review of the recent knowledge on PCOS pathophysiology, the role of granulosa and theca cells in PCOS pathogenesis, and the evidence linking exposure to EDCs with reproductive disorders such as PCOS.

Potential Adsorption Affinity of Estrogens on LDPE and PET Microplastics Exposed to Wastewater Treatment Plant Effluents

Microplastics (MPs) are among the most common pollutants in the environment. Because of their small size, availability, and similarity to natural foods, they are commonly ingested by marine organisms. They can cause health problems in living organisms due to their bioaccumulation potential. It is, therefore, unknown whether endocrine-disrupting chemicals (EDCs), in particular estrogens, are capable of adhering to the diverse types of MPs found in water. Two MP polymers (low-density polyethylene (LDPE) and polyethene terephthalate (PET)) that could pose a threat to fish were tested for estrogen adsorption. The adsorption capacity of MP pellets was studied for 30 days in the effluent and influent of a wastewater treatment-plant. A laboratory simulation was conducted to validate the field and laboratory findings. We found that the concentrations of five types of estrogen ((diethylstilbestrol (DES), estrone (E1), 17β-estradiol (E2), estriol (E3), 17α-ethinyl estradiol (EE2)) were higher in the influent than the effluent streams. LDPE and PET MPs exposed to influent water in the laboratory had higher estrogen levels than wastewater treatment plants (WWTP) pellets. The PET pellets showed the highest adsorption affinity to EE2, while the LDPE pellets showed the highest affinity to E2. As a result, this study provided baseline data to investigate the estrogen adsorption capacity in MPs.

The photochemical behaviors of microplastics through the lens of reactive oxygen species: Photolysis mechanisms and enhancing photo-transformation of pollutants

The photoaging mechanisms of various polymers have been explored based on the basic autoxidation scheme (BAS) before 10 years ago, however current research verified some defects in the BAS in both thermodynamic and dynamics. These defects are troublesome because they are associated with the hydrogen abstraction which is central to continuously perform the photooxidation process of microplastics. These found indicated that we might wrongly inferred photo-oxidation process of some microplastics. In addition, the important role of reactive oxygen species (ROS) in the type-dependent photoaging process of various microplastics has been revealed recently. In this case, fully and accurately understanding the photoaging mechanisms of different microplastics in environment is a priority to further manage the ecological risk of microplastics. Herein, this review aims to revise and update the degradation process of microplastics based on the revised BAS and in the perspective of ROS. Specifically, the modification of BAS is firstly discussed. The photoaging mechanisms of representative microplastics (i.e., polyethylene, polystyrene and polyethylene terephthalate) are then updated based on the corrected BAS. Additionally, the role of ROS in their photolysis process and the possibility of microplastics as photosensitizers/mediators to regulate the fate of co-existent pollutants are also analyzed. Finally, several perspectives are then proposed to guide future research on the photoaging behaviors of microplastics. This review would pave the way for the understanding of microplastic photoaging and the management of plastic pollution in environments.

Zinc oxide nanoparticles dissolution and toxicity enhancement by polystyrene microplastics under sunlight irradiation

Zinc oxide nanoparticles (ZnO NPs) dissolution is a critical process for the transformation and toxicity of ZnO NPs in aquatic environments. However, the effect of microplastics (MPs) on dissolution and toxicity of ZnO NPs under sunlight irradiation is still lacking. Herein, the dramatic increase in sunlight-induced ZnO NPs dissolution by polystyrene (PS) MPs was proven, which was attributed to the increase in h⁺-dependent and proton-dependent ZnO NPs dissolution by PS MPs, yielding ¹O₂ generation inhibition and acid release, respectively. The sizes, functional groups and aging status of PS MPs and pH were characteristic ZnO NPs dissolution through modifying ¹O₂, •OH and O₂^•- generation and acid release. Furthermore, the ZnO NPs dissolution affected by PS MPs also occurred in three realistic water samples, which were mainly governed by dissolved organic matter (DOM) and CO₃^2-, rather than Cl^- or SO₄^2-. The PS MPs (1 μg/mL) dramatically altered the Zn²⁺:ZnO ratio in ZnO NPs suspension after 96 h of sunlight irradiation and presented vehicle effects on Zn²⁺, which in turn significantly increased the ion-related toxicity of ZnO NPs to Daphnia magna. Based on the PS MPs enhanced dissolution and toxicity of ZnO NPs, the effects of PS MPs on the environmental risk assessment of ZnO NPs should be seriously considered in freshwater environments under sunlight irradiation.

Polystyrene microplastics sunlight-induce oxidative dissolution, chemical transformation and toxicity enhancement of silver nanoparticles

The coexistence of microplastics (MPs) and nanomaterials has been increasingly studied, but the influence of MPs on the chemical transformation of nanomaterials remains unclear. Herein, it was demonstrated that polystyrene (PS) MPs induce the oxidative dissolution, transformation and toxicity of silver nanoparticles (Ag NPs) under simulated sunlight irradiation. The PS MPs induced the oxidation dissolution of pristine Ag NPs by ¹O₂, OH and/or acid release and simultaneously reduced the released Ag⁺ to secondary Ag NPs by O₂^-. The sizes, functional groups and ageing status of the PS MPs and pH characterized secondary Ag NPs formation. Secondary formation of Ag NPs induced by PS MPs also occurred in realistic water and was governed by dissolved organic matter (DOM) and Cl^-, rather than SO₄^2- or CO₃^2-. Moreover, PS MPs remarkably promoted Ag⁺ release, altered the Ag⁺:Ag⁰ ratio, and presented vehicle effects on Ag⁺ toxicity to Daphnia magna. The concentration addition model demonstrated that the ion-related toxicity of Ag NPs was significantly increased by PS MPs. Therefore, PS MPs induced the oxidative dissolution, transformation and toxicity enhancement of Ag NPs under sunlight irradiation, and accordingly, the coexistence of PS MPs and Ag NPs in freshwater environments should be seriously considered.

ROS-mediated photoaging pathways of nano- and micro-plastic particles under UV irradiation

Reactive oxygen species (ROS) generation is considered as an important photoaging mechanism of microplastics (MPs) and nanoplastics (NPs). To elucidate the ROS-induced MP/NP aging processes in water under UV₃₆₅ irradiation, we examined the effects of surface coatings, polymer types and grain sizes on ROS generation and photoaging intermediates. Bare polystyrene (PS) NPs generated hydroxyl radicals (•OH) and singlet oxygen (¹O₂), while coated PS NPs (carboxyl-modified PS (PS-COOH), amino-modified PS (PS-NH₂)) and PS MPs generated fewer ROS due to coating scavenging or size effects. Polypropylene, polyethylene, polyvinyl chloride, polyethylene terephthalate and polycarbonate MPs only generated •OH. For aromatic polymers, •OH addition preferentially occurred at benzene rings to form monohydroxy polymers. Excess •OH resulted in H abstraction, CC scission and phenyl ring opening to generate aliphatic ketones, esters, aldehydes, and aromatic ketones. For coated PS NPs, •OH preferentially attacked the surface coatings to result in decarboxylation and deamination reactions. For aliphatic polymers, •OH attack resulted in the formation of carbonyl groups from peracid, aldehyde or ketone via H abstraction and CC scission. Moreover, ¹O₂ might participate in phenyl ring opening for PS NPs and coating degradation for coated PS NPs. This study facilitates understanding the ROS-induced weathering process of NPs/MPs in water under UV irradiation.

Influence of polystyrene microplastics on the volatilization, photodegradation and photoinduced toxicity of anthracene and pyrene in freshwater and artificial seawater

In this study, the influences of polystyrene microplastics (PS MPs) on the volatilization, photodegradation and photoinduced toxicities of anthracene and pyrene were determined in freshwater and artificial seawater. The PS MPs reduced the volatilization of anthracene and pyrene, and the volatilization reduction was highly dependent on the PS MPs sizes and concentrations. The PS MPs increased the photodegradation kinetics (k_p) of anthracene by promoting ¹O₂ generation and altered the photodegradation pathways through OH attack of the photodegradation byproducts. However, the k_p of pyrene was decreased by PS MPs suppressing the transfer of electrons from excited pyrene to oxygen. The PS MPs modified the pathways of pyrene photodegradation via OH attack of the photodegradation byproducts. Due to light shielding by DOM and/or PS MPs aggregates in seawater, the modification of the photodegradation pathways of anthracene and pyrene by PS MPs was hardly happened in seawater compared with in freshwater. By changing the concentrations of anthracene or pyrene and their photodegradation byproducts, the PS MPs greatly affected the photoinduced toxicities of anthracene and pyrene to Selenastrum capricornutum and Phaeodactylum tricornutum. The influences of PS MPs on the volatilization, photodegradation and photoinduced toxicity of anthracene and pyrene are important and should be carefully considered during environmental risk assessments of anthracene and pyrene.

Pulsed distribution of organotins in the turbidity maximum zone of the Yangtze Estuary throughout a tidal cycle

This study investigated the concentration fluctuation of organotin compounds in the Turbidity Maximum Zone (TMZ) of the Yangtze Estuary within a tidal cycle. Organotin concentrations varied greatly during the tidal cycle with dissolved organotins ranged from 39 to 682 ng Sn·L^-1 and 40-1588 ng Sn·L^-1, and particulate organotins ranged from 59 to 467 ng Sn·g^-1 dw and 21-429 ng Sn·g^-1 dw in TMZ water close to Hengsha Island and Jiuduansha Island, respectively. Meanwhile, the maximum levels of organotins appeared at each period of tidal transition, suggesting the tidal-driven pulsed exposure of organotins was prevalent in the estuaries. Besides, the organic carbon-normalized partition coefficients (K_oc) of tri-organotins between suspended particulate matter (SPM) and aqueous phase were correlated with the phase distribution of natural organic matter (NOM). The dissolved tri-organotins were also associated with the properties of dissolved organic carbon (DOC) including aromaticity, hydrophobicity, and chromophoricity. Hence, pulsed exposure on organotins in the TMZ are highly dictated by the dynamic environmental conditions (i.e., SPM and NOM) with the tidal currents, which could further provide information to assess organotin ecological risks accurately in estuaries.

Behavior and mechanism of atrazine adsorption on pristine and aged microplastics in the aquatic environment: Kinetic and thermodynamic studies

Microplastics (MPs) are emerging pollutants that have gained much attention due to their potential harm to aquatic ecosystems and organisms. In particular, MP conjugates are loaded with chemical contaminants (e.g., atrazine pesticide), which may be ingested by organisms and can pose higher risks. However, the combined pollution effects and interaction mechanisms remain poorly understood. In this study, we systematically explored the adsorption behaviors and mechanisms of atrazine (ATZ) on pristine and aged MPs using kinetics, isotherms, and thermodynamic models. The target MPs included polystyrene (PS), polyethylene (PE), and polypropylene (PP) as well as the corresponding aged types. Moreover, the effects of pH, humic acid (HA), ionic strength, and ion species (Cl^-, SO₄^2-, HCO₃^-, Mg²⁺, and Ca²⁺) of aqueous factors were evaluated. The adsorption capacities of MPs under kinetic equilibrium conditions were as follows: aged PE (0.940 mg g^-1) > aged PP (0.677 mg g^-1) > aged PS (0.663 mg g^-1) > PS (0.565 mg g^-1) > PE (0.535 mg g^-1) > PP (0.410 mg g^-1). The adsorption kinetics and isotherm model results suggested a combination of physisorption and chemisorption. The aging process and pH significantly affected the intrinsic charge on the surface of the MPs and their adsorption capacities. Moreover, the presence of water medium parameters might enhance or inhibit adsorption of different MPs. Hydrophobic and electrostatic attraction mainly contributed to the adsorption of ATZ on pristine MPs, whereas complex surface diffusion and hydrogen bonding dominated the ATZ adsorption on aged MPs with more oxygen-containing groups. In addition, we examined the desorption performance of ATZ from MPs under simulated gastric and intestinal conditions of warm-blooded animals, and found that the ATZ desorption ratio of aged PE (35.3%) showed the most significant effects among the six target types of MPs. This study provides in-depth insights into the co-existence and complex behaviors of MPs and the pesticide pollutant ATZ, to attract further attention to their ecological risks in freshwater environments.

Environmental behaviors of microplastics in aquatic systems: A systematic review on degradation, adsorption, toxicity and biofilm under aging conditions

Microplastics (MPs, < 5 mm) in the environment have attracted worldwide attention due to their wide distribution and difficulty in handling. Aging processes such as UV irradiation, biodegradation, physical abrasion and chemical oxidation can affect the environmental behavior of MPs. This review article summarizes different aging processes of MPs and subsequent effects on the adsorption of pollutants, the leaching of additives, and the toxicity of MPs. In addition, the formation process of biofilm on the surface of MPs and the interactions between biofilm and aged MPs are revealed. MPs can accumulate different environmental pollutants (organic pollutants, heavy metals, microorganisms, etc.) through surface adsorption, pore filling and distribution. Moreover, the aging of MPs affects their adsorption performance toward these pollutants due to a series of changes in their specific surface area and oxygen-containing functional groups. The release of some toxic additives such as phthalates after aging can enhance the toxic effects of MPs. Aging also changes the shape and size of MPs, which can affect the eating habits of the organisms and further increase the potential toxicity of MPs. This article conducts a systematical analysis and summary of the environmental behavior and physicochemical properties of MPs as well as the changes due to MPs aging, which helps to better understand the impact of aging on MPs in the environment. Future research on MPs aging should reduce the knowledge gap between laboratory simulation and actual conditions and increase the environmental relevance.

Adsorption behaviour and interaction of organic micropollutants with nano and microplastics - A review

Nano/microplastics (NPs/MPs) and organic micropollutants are contaminants exerting serious threats to aquatic ecosystems, which are further aggravated through their interactions. Organic micropollutants can adsorb on the surface of NPs/MPs, enter to the digestive systems of aquatic organisms with NPs/MPs, and desorb from the surface inside the organism. Consequently, the migration behaviour of organic micropollutants is significantly affected increasing their risk to accumulate in the food chain. Therefore, understanding the adsorption interactions between NPs/MPs and organic micropollutants is critical for evaluating the fate and impact of NPs/MPs in the environment. This review article provides an overview about the role of NPs/MPs as (temporary) sinks for organic micropollutants but also as primary sources of organic micropollutants through the leaching of plastic additives. Specifically, the following aspects are discussed: adsorption/desorption mechanisms (e.g., hydrophobic partitioning interaction, surface adsorption by van der Waals forces or hydrogen bonding, and pore filling), influencing environmental factors (e.g., pH, salinity, and dissolved organic matter), leaching of plastic additives from NPs/MPs, and potential ecotoxicological effects arising from the interactions of NPs/MPs and organic micropollutants.

Occurrence of bisphenol A and microplastics in landfill leachate: lessons from South East Europe

In order to confirm the landfills as potential sources of microplastics and bisphenol A (BPA), the investigation of microplastics occurrence and concentration levels of BPA in landfill leachate samples from three landfills sites in the South East Europe was conducted. The landfills have been selected depending on the different waste management practice, waste amounts, operating period as well as leachate management practice. Microplastic was detected in different sizes, shapes and colours in all analysed leachate samples. The obtained average concentration values of the microplastics particles in the leachate samples from all three landfills ranged from 0.64 to 2.16 mg L^-1. The BPA was detected in leachate samples from all landfill sites in average concentration levels from 0.70 to 2.72 mg L^-1 which are related to the content of microplastics.

Disparities in Methods Used to Determine Microplastics in the Aquatic Environment: A Review of Legislation, Sampling Process and Instrumental Analysis

Plastic particles smaller than 5 mm, i.e., microplastics, have been detected in a number of environments. The number of studies on microplastics in marine environments, fresh water, wastewater, the atmosphere, and the human body are increasing along with a rise in the amounts of plastic materials introduced into the environment every year, all contributing to a range of health and environmental issues. Although the use of primary microplastics has been gradually reduced by recent legislation in many countries, new knowledge and data on these problems are needed to understand the overall lifecycle of secondary microplastics in particular. The aim of this review is to provide unified information on the pathways of microplastics into the environment, their degradation, and related legislation, with a special focus on the methods of their sampling, determination, and instrumental analysis. To deal with the health and environmental issues associated with the abundance of microplastics in the environment, researchers should focus on agreeing on a uniform methodology to determine the gravity of the problem through obtaining comparable data, thus leading to new and stricter legislation enforcing more sustainable plastic production and recycling, and hopefully contributing to reversing the trend of high amounts of microplastics worldwide.

Charge transfer channels of silver @ cuprous oxide heterostructure core-shell nanoparticles strengthen high photocatalytic antibacterial activity

Marine biological fouling has always been a hot research topic. In this study, silver @ cuprous oxide (Ag@Cu₂O) core-shell nanoparticles were synthesized via in-situ synthesis method and developed an outstanding antibacterial activity. The bacteriostasis efficiency of Ag@Cu₂O reached to 99% and 98% against Staphylococcus aureus and Pseudomonas aeruginosa, respectively. The minimum inhibitory concentration of Ag@Cu₂O decreased from 113.6 μg/mL to 56.8 μg/mL compared with Cu₂O. Ag@Cu₂O had better antibacterial activity than Cu₂O with lower content of Cu₂O and was more environment friendly. The heterostructure formed at the interface between Ag and Cu₂O promoted the separation and diffusion of photogenerated electron-hole pairs through the charge transfer channel and promoted the generation of reactive oxygen species. The outstanding antibacterial activity of Ag@Cu₂O was strongly depended on the generation of the reactive oxygen species. Density functional theory and finite element method calculations demonstrated that the structure of core-shell improved photocatalytic efficiency. Additionally, synergetic effect of released Ag⁺ and Cu²⁺ also enhanced the bacteriostasis rate and the long-term antifouling performance in 60 days. Hence, the synthesized core-shell Ag@Cu₂O can be applied as novel antifoulants in the marine field.

Adsorption of phenanthrene and its monohydroxy derivatives on polyvinyl chloride microplastics in aqueous solution: Model fitting and mechanism analysis

The pervasiveness of microplastics, which can absorb pollutants, has a certain impact on pollutant migration in natural waters. Differences in functional groups, such as the hydroxyl group, of pollutants will affect their adsorption on microplastics. In this study, the adsorption of phenanthrene (PHE) or its monohydroxy derivatives, including 1-hydroxyphenanthrene (1-OHP), 2-hydroxyphenanthrene (2-OHP), 4-hydroxyphenanthrene (4-OHP), and 9-hydroxyphenanthrene (9-OHP), on polyvinyl chloride (PVC, measured mean particle size = 134 μm) microplastics was studied. The adsorption efficiency of PHE was shown to be higher than that of either of OHPs. A better fit for pseudo-second-order and Freundlich isotherm models was obtained, indicating different binding sites on the surface of PVC microplastics. The adsorption processes of PHE and OHPs on PVC microplastics were demonstrated to be exothermic and spontaneous. Combined with FT-IR analysis, theoretical calculation, and comparative adsorption experiments, hydrophobic interaction was the dominant mechanism during the adsorption process. In contrast, electrostatic repulsion, CH/π interaction, and halogen bonding played a minor role, to an extent, in the adsorption of PHE/OHPs on PVC microplastics. These findings indicate the influence of the hydroxyl group on adsorption and improve the understanding of interactions between PVC microplastics and PHE/OHPs.

Alignment Layer of Liquid Crystal Using Plant-Based Isoeugenol-Substituted Polystyrene

We synthesized a series of renewable and plant-based isoeugenol-substituted polystyrenes (PIEU#, # = 100, 80, 60, 40, and 20, where # is the molar percent content of isoeugenol moiety), using polymer modification reactions to study their liquid crystal (LC) alignment behavior. In general, the LC cells fabricated using polymer film with a higher molar content of isoeugenol side groups showed vertical LC alignment behavior. This alignment behavior was well related to the surface energy value of the polymer layer. For example, vertical alignments were observed when the polar surface energy value of the polymer was smaller than approximately 3.59 mJ/m2, generated by the nonpolar isoeugenol moiety with long and bulky carbon groups. Good alignment stability at 100 °C and under ultraviolet (UV) irradiation of 15 J/cm2 was observed for the LC cells fabricated using PIEU100 as a LC alignment layer. Therefore, renewable isoeugenol-based materials can be used to produce an eco-friendly vertical LC alignment system.