Modeling the fate and human health impacts of pharmaceuticals and personal care products in reclaimed wastewater irrigation for agriculture

Evaluation of morphological and cytotoxic effects of minoxidil on Phaseolus vulgaris L. as a plant model

The increasing presence of drugs in the environment has triggered a pollution crisis on a global scale, generating concern about their ecotoxicological effects on ecosystems. In this context, minoxidil, a vasodilator drug widely used in the treatment of androgenic alopecia, has been scarcely investigated in plant systems. Therefore, this study evaluated the morphological and cytotoxic effects of minoxidil on Phaseolus vulgaris L as a bioindicator. P. vulgaris seeds were exposed to different concentrations of minoxidil (0.0, 0.25, 0.5, 1, 1.25, 2.5 and 5 mg/L) and parameters such as germination, root growth, mitotic index and frequency of chromosomal abnormalities were assessed. The results showed a significant inhibition of germination (75-76%) and root growth (52.6-55.3%) at high concentrations of minoxidil (2.55 mg/L-5 mg/L). In addition, a decrease in the mitotic index (8.2) and an increase in the frequency of chromosomal abnormalities (10.2) were observed, suggesting a cytotoxic effect. These findings show that minoxidil, even at low concentrations, can have adverse effects on the morphology and cell division of P. vulgaris. This study demonstrates the potential of plants as tools to evaluate the phytotoxicity and cytotoxicity of drugs and highlights the need to implement measures to reduce the contamination of these drugs in the environment.

Towards sustainable water reuse: A critical review and meta-analysis of emerging chemical contaminants with risk-based evaluation, health hazard prediction and prioritization for assessment of effluent water quality

Reuse of treated wastewater is necessary to address water shortages in a changing climate. Sustainability of wastewater reuse requires reducing the environmental impacts of contaminants of emerging concern (CECs), but it is being questioned as CECs are not regulated in the assessment of effluent water quality for reuse both nationally in Sweden and at the broader European Union level. There is also a lack of details in this topic on which CECs to be addressed and methodologies to be used for assessing their environmental impacts. A better understanding of the ecological risks and health hazards of CECs associated with wastewater reuse will assist in the development of effective regulations on water reuse, (inter)nationally, as well as related treatment/monitoring guidelines. This review provides a list of specific chemical CECs that hinder sustainable wastewater reuse, and also demonstrates a holistic quantitative methodology for assessing, scoring and prioritizing their associated ecological risks and health hazards posed to the environment and humans. To achieve this, we compile information and concentrations of a wide range of CECs (∼15 000 data entries) identified in Swedish effluent wastewater from domestic (blackwater, greywater, mixture of both) and municipal settings, and further perform a meta-analysis of their potentials for 14 risk and hazard features, consisting of ecological risk, environmental hazard, and human health hazard. The features are then scored against defined criteria including guideline values, followed by score ranking for prioritization. This finally produces a unique list of chemical CECs from high to low priority based on risk- and hazard-evaluations. Out of the priority chemicals, 30, mainly pharmaceuticals, had risk quotient ≥ 1, indicating ecological risk, 16 had environmental hazard being persistent and mobile, and around 60 resulted in positive predictions for at least four human health hazards (particularly skin sensitization, developmental toxicity, hepatoxicity, and carcinogenicity). The 10 highest-priority chemicals (final score 2.3-3.0 out of 4.0) were venlafaxine, bicalutamide, desvenlafaxine, diclofenac, amoxicillin, clarithromycin, diethyltoluamide, genistein, azithromycin, and fexofenadine. Potential crop exposure to selected chemicals following one year of wastewater reuse for agricultural irrigation was also estimated, resulting in a range of 0.04 ng/kg (fluoxetine) to 1160 ng/kg (carbamazepine). Overall, our work will help focus efforts and costs on the critical chemicals in future (waste)water-related studies, such as, to evaluate removal efficiency of advanced treatment technologies and to study upstream source tracing (polluter-pays principle), and also in supporting policymakers to better regulate CECs for sustainable wastewater reuse in the future.

Modelling the impacts generated by reclaimed wastewater reuse in agriculture: From literature gaps to an integrated risk assessment in a One Health perspective

The reuse of reclaimed wastewater is increasingly recognized as a viable alternative water source for irrigation. Its application, whether direct or indirect, impacts several interconnected compartments, including groundwater, surface water, soil, crops, and humans. Reclaimed wastewater provides essential resources for crops, like water and nutrients. However, it also introduces pathogens, and contaminants of emerging concern (CECs), defined as chemicals that may pose risks to human health and ecosystems but are not yet fully regulated, such as pharmaceuticals and personal care products, among others. Additionally, reclaimed wastewater may contain antibiotic-resistant bacteria (ARBs) and disinfection by-products (DBPs), all of which present potential health and environmental risks. Therefore, regulatory bodies stress the need for preventive risk assessments to ensure safe reuse. This paper critically reviews available models for assessing the impacts of reclaimed wastewater reuse in agriculture. It identifies gaps in current modelling approaches and outlines future research directions. Key areas requiring further investigation include the fate and transfer of CECs, ARBs and DBPs, and the co-occurrence of multiple risks in such interconnected systems, especially in the indirect reuse. To address these gaps, we proposed a simplified approach to integrate three types of risk associated with CECs in indirect reuse, focusing on risks posed by antibiotics and other pharmaceuticals: human health risk, environmental risk and risk from antibiotic resistance development. This approach aids in identifying the most critical endpoints within the One Health approach, supporting (i) CECs prioritization in regulations based on their critical endpoints and (ii) the adoption of CEC-specific mitigation measures.

Are pharmaceutical residues in crops a threat to human health?

The application of biosolids, manure, and slurry onto agricultural soils and the growing use of treated wastewater in agriculture result in the introduction of human and veterinary pharmaceuticals to the environment. Once in the soil environment, pharmaceuticals may be taken up by crops, resulting in consequent human exposure to pharmaceutical residues. The potential side effects of pharmaceuticals administered in human medicine are widely documented; however, far less is known regarding the risks that arise from incidental dietary exposure. The aim of this study was to evaluate human exposure to pharmaceutical residues in crops and assess the associated risk to health for a range of pharmaceuticals frequently detected in soils. Estimated concentrations of carbamazepine, oxytetracycline, sulfamethoxazole, trimethoprim, and tetracycline in soil were used in conjunction with plant uptake and crop consumption data to estimate daily exposures to each compound. Exposure concentrations were compared to Acceptable Daily Intakes (ADIs) to determine the level of risk. Generally, exposure concentrations were lower than ADIs. The exceptions were carbamazepine, and trimethoprim and sulfamethoxazole under conservative, worst-case scenarios, where a potential risk to human health was predicted. Future research therefore needs to prioritize investigation into the health effects following exposure to these compounds from consumption of contaminated crops.

Occurrence of pharmaceuticals in Latin America: case study on hazard assessment and prioritization in Costa Rica

Pharmaceuticals are considered as contaminants of emerging concern, and their occurrence in diverse environmental matrices has been described during the last 25 years. Nonetheless, pharmaceutical occurrence has not been evenly described worldwide, and reports from some geographical areas such as most parts of Latin America are scarce. This work aims to address the situation of water pollution due to pharmaceuticals in Latin America by means of two main goals: i. First, reviewing the monitoring studies performed in Latin America on this topic (period 2009-2024), which were conducted in Brazil, Mexico, Colombia, Ecuador, Peru and Argentina, to highlight the most frequently detected compounds from each therapeutic group in the region. ii. Second, analyzing the case of Costa Rica through the hazard assessment and prioritization of pharmaceuticals based on the monitoring performed in this country (years 2011; 2018-2019). The monitoring in Costa Rica comprised a total of 163 sampling points: wastewater treatment plants (WWTPs) (14 urban WWTPs plus two landfill WWTPs; total samples n = 44 influents and n = 34 effluents), nine hospital effluents (n = 32), wastewater from livestock farms (six swine farms and seven dairy farms; n = 23 influents and n = 37 effluents), 64 continental surface water sampling points (n = 137), and 61 coastal seawater sampling points (n = 61). Risk assessment of detected concentrations by the hazard quotient (HQ) approach (period 2018-2019) revealed a total of 25 medium or high-hazard compounds (out of 37 detected compounds). The prioritization approach (which included the Frequency of Appearance (FoA), the Frequency of PNEC exceedance (FoE), and the Extent of predicted no-effect concentration (PNEC) exceedance (EoE)), showed a critical list of nine pharmaceuticals: caffeine, diphenhydramine, acetaminophen, lovastatin, gemfibrozil, ciprofloxacin, ibuprofen, doxycycline and norfloxacin. These compounds should be taken into account as a first concern during the implementation of environmental policies related to pharmaceutical products in the region.

Factors driving PPCPs uptake by crops after wastewater irrigation and human health implications

Currently, water scarcity affects more than three billion people. Nevertheless, the volume of treated wastewater discharged into the environment is estimated to exceed 100 m3 per inhabitant/year. These water resources are regularly used in agriculture worldwide to overcome water shortages. Such a practice, however, entails the uptake of waterborne pollutants, such as pharmaceuticals and personal care products (PPCPs), by crops and their further access to the food web, constituting an additional route of human exposure to PPCPs, with potential health outcomes. In this study, the occurrence of 56 PPCPs in tomatoes, lettuce, and carrot, together with soil and irrigation water, was evaluated using a QuEChERS-based methodology for extraction and LC-MS/MS for analysis. The influence of the selected cultivation conditions on the plant uptake levels of PPCPs was assessed. Two irrigation water qualities (secondary and tertiary treatment effluents), two soil compositions (sandy and clayey), two irrigation systems (dripping and sprinkling), and three crop types (lettuce, tomato, and carrot) were tested. Carrots showed the highest load of PPCPs (7787 ng/g dw), followed by tomatoes (1692 ng/g dw) and lettuces (1248 ng/g dw). The most translocated PPCPs were norfluoxetine (fluoxetine antidepressant main metabolite) (521 ng/g dw), and the anti-inflammatory diclofenac (360 ng/g dw). Nine PPCPs, are reported to be accumulated in crops for the first time. Water quality was the most important factor for reducing PPCPs' plant uptake. Overall, the best conditions for reducing PPCP uptake by crops were irrigation with reclaimed water by sprinkling in soils with higher clay content. The risk assessment performed revealed that the crops' consumption posed no risk to human health. This study serves as the first comprehensive assessment of the relevance of diverse cultivation factors on PPCPs' plant uptake under field agricultural practices.

Dissipation of twelve organic micropollutants in three different soils: Effect of soil characteristics and microbial composition

The dissipation kinetics and half-lives of selected organic micropollutants, including pharmaceuticals and others, were systematically investigated and compared among different soil types. While some pollutants (e.g., atorvastatin, valsartan, and bisphenol S) disappeared rapidly in all the tested soils, many of them (e.g., telmisartan, memantine, venlafaxine, and azithromycin) remained persistent. Irrespective of the soil characteristics, venlafaxine showed the lowest dissipation kinetics and the longest half-lives (250 to approximately 500 days) among the stable compounds. The highest first and second-order kinetics were, however, recorded for valsartan (k1; 0.262 day-1) and atorvastatin (k2; 33.8 g μg-1 day-1) respectively. Nevertheless, more than 90% (i.e., DT90) of all the rapidly dissipated compounds (i.e., atorvastatin, bisphenol S, and valsartan) disappeared from the tested soils within a short timescale (i.e., 5-36 days). Dissipation of pollutants that are more susceptible to microbial degradation (e.g., atorvastatin, bisphenol S, and valsartan) seems to be slower for soils possessing the lowest microbial biomass C (Cmic) and total phospholipid fatty acids (PLFAtotal), which also found statistically significant. Our results revealing the persistence of several organic pollutants in agricultural soils, which might impact the quality of these soils, the groundwater, and eventually on the related biota, is of high environmental significance.

A critical review on the removal of toxic pollutants from contaminated water using magnetic hybrids

The persistence of organic/inorganic pollutants in the water has become a serious environmental issue. Among the different pollutants, dyes and heavy metal pollution in waterways are viewed as a global ecological problem that can have an impact on humans, plants, and animals. The necessity to develop a sustainable and environmentally acceptable approach to remove these toxic contaminants from the ecosystem has been raised. In the past two decades, rapid industrialization and anthropogenic activities in developed countries have aggravated environmental pollution. Industrial effluents that are discharged directly into the natural environment taint the water, which has a consequence for the water resources. Magnetic nanohybrids are broadly investigated materials used in the adsorption and photocatalytic degradation of poisonous pollutants present across water effluents. In the present review, the toxic health effects of heavy metals and dyes from the water environment have been discussed. This paper reviews the role of magnetic nanohybrids in the removal of pollutants from the water environment, providing an adequate point of view on their new advances regarding their qualities, connection methodologies, execution, and their scale-up difficulties.

Ecological risks induced by consumption and emission of Pharmaceutical and personal care products in Qinghai-Tibet Plateau: Insights from the polar regions

As the third pole of the world and Asia's water tower, the Tibetan Plateau experiences daily release of pharmaceutical and personal care products (PPCPs) due to increasing human activity. This study aimed to explore the potential relationship between the concentration and composition of PPCPs and human activity, by assessing the occurrence of PPCPs in areas of typical human activity on the Qinghai-Tibet Plateau and evaluating their ecological risk. The results indicate that 28 out of 30 substances were detected in concentrations ranging from less than 1 ng/L to hundreds of ng/L, with the average concentration of most PPCPs in the Tibet Autonomous Region being higher than that in Qinghai Province. Among the detected substances, CAF, NOR, CTC, CIP, TCN, OTC, AZN, and DOX accounted for over 90% of the total concentration. The emission sources of PPCPs were identified by analyzing the correlation coefficients of soil and water samples, with excess PPCPs used by livestock breeding discharged directly into soil and then into surface water through leaching or runoff. By comparing the concentration and composition of PPCPs with those in other regions, this study found that CIP, ENR, LOM, NOR, CTC, DOX, OTC, and TCN were the most commonly used PPCPs in the Qinghai-Tibet Plateau. To assess the ecological risk of PPCPs, organisms at different trophic levels, including algae, crustaceans, fish, and insects, were selected. The prediction of the no effect concentration of each PPCP showed that NOR, CTC, TCN, CAF, and CBZ may have deleterious effects on water biota. This study can assist in identifying the emission characteristics of PPCPs from different types and intensities of human activities, as well as their occurrence and fate during the natural decay of aquatic systems.

Augmented dissemination of antibiotic resistance elicited by non-antibiotic factors

The emergence and rapid spread of antibiotic resistance seriously compromise the clinical efficacy of current antibiotic therapies, representing a serious public health threat worldwide. Generally, drug-susceptible bacteria can acquire antibiotic resistance through genetic mutation or gene transfer, among which horizontal gene transfer (HGT) plays a dominant role. It is widely acknowledged that the sub-inhibitory concentrations of antibiotics are the key drivers in promoting the transmission of antibiotic resistance. However, accumulating evidence in recent years has shown that in addition to antibiotics, non-antibiotics can also accelerate the horizontal transfer of antibiotic resistance genes (ARGs). Nevertheless, the roles and potential mechanisms of non-antibiotic factors in the transmission of ARGs remain largely underestimated. In this review, we depict the four pathways of HGT and their differences, including conjugation, transformation, transduction and vesiduction. We summarize non-antibiotic factors accounting for the enhanced horizontal transfer of ARGs and their underlying molecular mechanisms. Finally, we discuss the limitations and implications of current studies.

Recent advances in the biological treatment of wastewater rich in emerging pollutants produced by pharmaceutical industrial discharges

Pharmaceuticals and personal care products present potential risks to human health and the environment. In particular, wastewater treatment plants often detect emerging pollutants that disrupt biological treatment. The activated sludge process is a traditional biological method with a lower capital cost and limited operating requirements than more advanced treatment methods. In addition, the membrane bioreactor combines a membrane module and a bioreactor, widely used as an advanced method for treating pharmaceutical wastewater with good pollution performance. Indeed, the fouling of the membrane remains a major problem in this process. In addition, anaerobic membrane bioreactors can treat complex pharmaceutical waste while recovering energy and producing nutrient-rich wastewater for irrigation. Wastewater characterizations have shown that wastewater's high organic matter content facilitates the selection of low-cost, low-nutrient, low-surface-area, and effective anaerobic methods for drug degradation and reduces pollution. However, to improve the biological treatment, researchers have turned to hybrid processes in which all physical, chemical, and biological treatment methods are integrated to remove various emerging contaminants effectively. Hybrid systems can generate bioenergy, which helps reduce the operating costs of the pharmaceutical waste treatment system. To find the most effective treatment technique for our research, this work lists the different biological treatment techniques cited in the literature, such as activated sludge, membrane bioreactor, anaerobic treatment, and hybrid treatment, combining physicochemical and biological techniques.

Insight into the interaction between trimethoprim and soluble microbial products produced from biological wastewater treatment processes

Soluble microbial products (SMPs), dissolved organic matter excreted by activated sludge, can interact with antibiotics in wastewater and natural water bodies. Interactions between SMPs and antibiotics can influence antibiotic migration, transformation, and toxicity but the mechanisms involved in such interactions are not fully understood. In this study, integrated spectroscopy approaches were used to investigate the mechanisms involved in interactions between SMPs and a representative antibiotic, trimethoprim (TMP), which has a low biodegradation rate and has been detected in wastewater. The results of liquid chromatography-organic carbon detection-organic nitrogen detection indicated that the SMPs used in the study contained 15% biopolymers and 28% humic-like substances (based on the total dissolved organic carbon concentration) so would have contained sites that could interact with TMP. A linear relationship of fluorescent intensities of tryptophan protein-like substances in SMP was observed (R²>0.99), indicating that the fluorescence enhancement between SMP and TMP occurred. Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy indicated that carboxyl, carbonyl, and hydroxyl groups were the main functional groups involved in the interactions. The electrostatic and π-π interactions were discovered by the UV-vis spectra and ¹H nuclear magnetic resonance spectra. Structural representations of the interactions between representative SMP subcomponents and TMP were calculated using density functional theory, and the results confirmed the conclusions drawn from the ¹H nuclear magnetic resonance spectra. The results help characterize SMP-TMP complexes and will help understand antibiotic transformations in wastewater treatment plants and aquatic environments.

Nitrogen-doped magnetic porous carbon material from low-cost anion-exchange resin as an efficient adsorbent for tetracyclines in water

In this work, nitrogen-doped magnetic porous carbon material (N-MPC) was prepared through the high-temperature calcination of low-cost [Fe(CN)₆]^3--loaded anion-exchange resin, which was experimentally demonstrated to have significant adsorption performance for tetracycline (TC) in water. The N-MPC adsorbent with a large specific surface area (781.1 m² g^-1) was able to maintain excellent performance in a wide pH range from 4 to 10 or in high ionic strength solution. The adsorption of TC on N-MPC was found to be more consistent with the pseudo-second-order model and Langmuir adsorption model, and the maximum adsorption capacity (q_{m, cal}) was calculated to be 603.4 mg g^-1. As a recoverable magnetic adsorbent, the N-MPC remained a TC removal rate higher than 70% after four adsorption cycles. The adsorption mechanism was speculated on the basis of characterizations, where pore filling, hydrogen bonding interaction, and π-π electron donor-acceptor (EDA) interaction were crucial adsorption mechanisms. A variety of antibiotics were selected for adsorption, and excellent performance was found especially for TCs, indicating that the N-MPC can be used for the efficient removal of TCs from water.

Modeling the fate of ionizable pharmaceutical and personal care products (iPPCPs) in soil-plant systems: pH and speciation

A model was developed to simulate the pH-dependent speciation and fate of ionizable pharmaceutical and personal care products (iPPCPs) in soils and their plant uptake during thedt application of reclaimed wastewater to agricultural soils. The simulation showed that pH plays an important role in regulating the plant uptake of iPPCPs, i.e., ibuprofen (IBU; with a carboxylic group), triclosan (TCS; phenolic group), and fluoxetine (FXT; amine group) as model compounds. It took 89-487 days for various iPPCPs to reach the steady-state concentrations in soil and plant tissues. The simulated steady-state concentrations of iPPCPs in plant tissues at pH 9 is 2.2-2.3, 2.5-2.6, and 1.07-1.08 times that at pH 5 for IBU, TCS, and FXT, respectively. Assuming sorption only for neutral compounds led to miscalculation of iPPCPs concentrations in plant tissues by up to one and half orders magnitude. Efflux of compounds in soil, lettuce leaf, and soybean pods was primarily contributed by their degradation in soil and dilution due to plant tissue growth. Overall, the results demonstrated the importance of considering pH and speciation of iPPCPs when simulating their fate in the soil-plant system and plant uptake.

Influence of methylation and demethylation on plant uptake of emerging contaminants

Contaminants of emerging concern (CECs) as well as their transformation products (TPs) are often found in treated wastewater and biosolids, raising concerns about their environmental risks. Small changes in chemical structure, such as the addition or loss of a methyl group, as the result of methylation or demethylation reaction, may significantly alter a chemical's physicochemical properties. In this study, we evaluated the difference in accumulation and translocation between four CECs and their respective methylated or demethylated derivatives in plant models. Suspended Arabidopsis thaliana cell culture and wheat seedlings were cultivated in nutrient solutions containing individual compounds at 1 mg/L. The methylated counterparts were generally more hydrophobic and showed comparative or greater accumulation in both plant models. For example, after 1 h incubation, methylparaben was found in A. thaliana cells at levels two orders of magnitude greater than demethylated methylparaben. In contrast, the demethylated counterparts, especially those with the addition of a hydroxyl group after demethylation, showed decreased plant uptake and limited translocation. For example, acetaminophen and demethylated naproxen were not detected in the shoots of wheat seedlings after hydroponic exposure. Results from this study suggest that common transformations such as methylation and demethylation may affect the environmental fate of CECs, and should be considered to obtain a more comprehensive understanding of risks of CECs in the environment.

Bioremediation of hazardous pollutants from agricultural soils: A sustainable approach for waste management towards urban sustainability

Soil contamination is perhaps the most hazardous issue all over the world; these emerging pollutants ought to be treated to confirm the safety of our living environment. Fast industrialization and anthropogenic exercises have resulted in different ecological contamination and caused serious dangerous health effects to humans and animals. Agro wastes are exceptionally directed because of their high biodegradability. Effluents from the agro-industry are a possibly high environmental risk that requires suitable, low-cost, and extensive treatment. Soil treatment using a bioremediation method is considered an eco-accommodating and reasonable strategy for removing toxic pollutants from agricultural fields. The present review was led to survey bioremediation treatability of agro soil by microbes, decide functional consequences for microbial performance and assess potential systems to diminish over potentials. The presence of hazardous pollutants in agricultural soil and sources, and toxic health effects on humans has been addressed in this review. The present review emphasizes an outline of bioremediation for the effective removal of toxic contaminants in the agro field. In addition, factors influencing recent advancements in the bioremediation process have been discussed. The review further highlights the roles and mechanisms of micro-organisms in the bioremediation of agricultural fields.

Soil degradation kinetics of oxybenzone (Benzophenone-3) and toxicopathological assessment in the earthworm, Eisenia fetida

A preponderance of recent evidence indicates that oxybenzone and other personal-care product chemicals threaten the biota inhabiting various ecological niches. What is understudied is the ecotoxicological impact of oxybenzone, a UV filter in sunscreens and anti-aging products, to terrestrial/soil organisms that are keystone species in these habitats. In the present study, acute exposure (14-day) to oxybenzone resulted in earthworm mortality (LC₅₀ of 364 mg/kg) and growth rate inhibition. Environmentally relevant concentration of oxybenzone (3.64, 7.28 and 36.4 mg/kg) at exposures of 7-day, 14-day, 28-day induced oxidative stress and neurotoxicity followed by perturbations in reproduction processes and changes in vital organs. Decreased levels of superoxide dismutase (SOD) and catalase (CAT) activity were statistically lower than controls (p < 0.05) on day 14 for all three concentrations, while glutathione-s-transferase (GST) activity was significantly elevated from controls on days 7 and 14. On day 28, SOD and CAT activities were either not significantly different from the control or were higher, demonstrating a temporal multiphasic response of anti-oxidant enzymes. GST activity on day 28 was significantly reduced compared to controls. Acetylcholinesterase levels across the three-time points exhibited a complicated behaviour, with every exposure concentration being significantly different from the control. Chronic exposure negatively influences earthworm health status with elevated biomarker values analysed using IBRv2 index. This, in turn, impacted higher levels of hierarchical organization, significantly impairing reproduction and organismal homeostasis at the histological level and manifesting as decreasing cocoon formation and successful hatching events. Thus, the overall findings demonstrate that oxybenzone is toxic to Eisenia fetida at low-level, long-term exposure. Based on the concentration verification analysis and application of the EPA PestDF tool, oxybenzone undergoes single first-order kinetics degradation in OECD soil with DT50 and DT90 as 8.7-28.9 days, respectively.

First report on the occurrence of pharmaceuticals and cocaine in the coastal waters of Santa Catarina, Brazil, and its related ecological risk assessment

The worldwide occurrence of pharmaceuticals and personal care products (PPCPs) in aquatic ecosystems is reason for public concern. These emerging micropollutants include a large and diverse group of organic compounds, with continuous input, high environmental persistence and potential threat to biota and human health. The aim of this study was to evaluate, for the first time, the occurrence of twenty-seven PPCPs of various therapeutic classes (including cocaine and its primary metabolite, benzoylecgonine), in the coastal waters of Santa Catarina, southern Brazil. Water samples were taken in November 2020, during the low tide periods, at eight sampling points located along the coast of Santa Catarina, covering its entire geographical extension. Sampling was carried out in triplicate and at different depths of the water column. Nine compounds were detected through liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS): caffeine (12.58-119.80 ng/L), diclofenac (1.34-7.92 ng/L), atenolol (1.13-2.50 ng/L), losartan (0.43-3.20 ng/L), acetaminophen (0.21-10.04 ng/L), orphenadrine (0.07-0.09 ng/L), cocaine (0.02-0.17 ng/L), benzoylecgonine (0.01-1.1 ng/L) and carbamazepine (0.02-0.27 ng/L). The highest occurrence of these compounds was detected in the northern and central coastal region of Santa Catarina, namely in Penha and Palhoça cities. Moreover, the risk assessment showed that almost compounds (atenolol, benzoylecgonine, carbamazepine, cocaine and orphenadrine) presented no ecological risk in the recorded concentrations. However, a few compounds suggest low (caffeine and diclofenac) to moderate (acetaminophen and losartan) risk taking into consideration the acute and chronic effects for the three trophic levels (algae, crustacean and fish) tested. These compounds are usually found in areas with high population density, aggravated by tourism, because of the sanitary sewage and solid waste. Although in low concentrations, the occurrence of these chemical compounds can imply deleterious effects on the environmental health of Santa Catarina coastal zone, and therefore deserve more attention by the public authorities and environmental agencies.

Electrocatalytic degradation of sulfamethylthiadiazole by GAC@Ni/Fe three-dimensional particle electrode

In this work, GAC@Ni/Fe particle electrodes were prepared and employed for the degradation of sulfamethylthiadiazole (SMT) by three-dimensional electrocatalytic technology. The effects of particle electrode bi-metal loading ratio, cell voltage, particle electrode dosage, electrode plate spacing, and SMT initial concentration on SMT removal were studied. In addition, GAC@Ni/Fe particle electrode was analyzed by the scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectrometer (XPS), and Fourier transform infrared spectrometer (FTIR) to characterize which indicated that a significant amount of iron-nickel oxide was formed on the surface of GAC@Ni/Fe particle electrode. The results indicated that when the nickel-iron loading ratio is 1:1, the SMT removal effect is the best, and the removal rate can reach 90.89% within 30 min. Compared with the granular activated carbon without bimetal, the removal efficiency is increased by 37.58%. The degradation of SMT in the GAC@Ni/Fe particle three-dimensional electrode reactor is the joint result of both direct oxidation and indirect oxidation. The contribution rates of direct oxidation of anode and particle electrode and indirect oxidation of ·OH in the degradation are 32%, 27%, and 41%, respectively. Based on the intermediate detected by ultra-high liquid chromatography and the calculation of bond energy of SMT molecule by Gauss software, the degradation pathway of SMT in the GAC@Ni/Fe three-dimensional electrode reactor is proposed. This research provides a green, healthy, and effective method for removing sulfonamide micro-polluted wastewater.

Reclaimed water reuse system on water quality, growth of irrigated crops, and impact of ecology: case study in Taiwan

In rapidly urbanized regions, the development of sustainable and resilient urban agriculture is essential to reduce environmental pollution and ensure reusable resources. The purpose of this study was to design, implement, and analyze the effects of reclaimed water reuse systems on crop growth, water purification, and ecology. A simulated experimental field near the side of Li Tse Lake at MingDao University in Changhua County, Taiwan, was chosen as the research field. A reclaimed water reuse system was established to collect domestic sewage discharged from the student dormitory, and a soil filter bed and plants in the system were used to purify the sewage, so as to detect its effects on water quality, soil, plant growth, and ecology throughout the year. According to the results, the water purified by the reclaimed water reuse system met the agricultural irrigation water quality criteria. While the soil filter bed showed that the purified water was alkaline and had low electrical conductivity, this did not affect plant growth. In the reclaimed water reuse system, the cultivation of fruiting and leafy vegetables increased the habitats of a number of organisms, and a total of 49 families of arthropods in 13 orders were found. This study showed that the reclaimed water reuse system could not only purify water and promote water reuse but also improve the ecology and develop the potential for food production.

Contaminants of emerging concerns in recycled water: Fate and risks in agroecosystems

Recycled water (RW) has been increasingly recognized as a valuable source of water for alleviating the global water crisis. When RW is used for agricultural irrigation, many contaminants of emerging concern (CECs) are introduced into the agroecosystem. The ubiquity of CECs in field soil, combined with the toxic, carcinogenic, or endocrine-disrupting nature of some CECs, raises significant concerns over their potential risks to the environment and human health. Understanding such risks and delineating the fate processes of CECs in the water-soil-plant continuum contributes to the safe reuse of RW in agriculture. This review summarizes recent findings and provides an overview of CECs in the water-soil-plant continuum, including their occurrence in RW and irrigated soil, fate processes in agricultural soil, offsite transport including runoff and leaching, and plant uptake, metabolism, and accumulation. The potential ecological and human health risks of CECs are also discussed. Studies to date have shown limited accumulation of CECs in irrigated soils and plants, which may be attributed to multiple attenuation processes in the rhizosphere and plant, suggesting minimal health risks from RW-fed food crops. However, our collective understanding of CECs is rather limited and knowledge of their offsite movement and plant accumulation is particularly scarce for field conditions. Given a large number of CECs and their occurrence at trace levels, it is urgent to develop strategies to prioritize CECs so that future research efforts are focused on CECs with elevated risks for offsite contamination or plant accumulation. Irrigating specific crops such as feed crops and fruit trees may be a viable option to further minimize potential plant accumulation under field conditions. To promote the beneficial reuse of RW in agriculture, it is essential to understand the human health and ecological risks imposed by CEC mixtures and metabolites.

Almalki A, F Alkhanani M, Pal DB. Waste seeds of Mangifera indica, Artocarpus heterophyllus, and Schizizium commune as biochar for heavy metal removal from simulated wastewater

The threat of arsenic contamination in water is a challenging issue worldwide. Millions of people utilize untreated groundwater having high levels of arsenic in developing countries. Design Expert 6.0.8 has been used to design experiments and carried out statistical analysis for optimization of different parameters. It is of prime importance to develop cheap environment friendly bio-sorbent for protecting health of the poor from ill effects of arsenic. In the present investigation, we prepared bio-sorbent from the solid waste seed biomass of Mangifera indica (M), Artocarpus heterophyllus (JF), and Schizizium commune (JP). The characterization of bio-sorbents has been done by using different techniques namely FTIR and XRD. Arsenic concentration was estimated using ICP and adsorption parameters optimized for pH, adsorbent dose, and initial arsenic concentration. At pH 8.4, kinetics study of arsenic removal was M (94%), JF (93%), and JP (92%) for initial concentration of 2.5 ppm. The adsorption kinetics was well explained by Freundlich model and pseudo-second reaction order.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13399-021-02078-5.

Ecotoxicological effects, environmental fate and risks of pharmaceutical and personal care products in the water environment: A review

Due to the extensive use and incomplete removal, pharmaceutical and personal care products (PPCPs) are introduced into the water continuously. It has been proved that the unique properties of PPCPs are influential to organisms and the environment, and gradually affect human health. In this paper, the toxicological effects of typical PPCPs, and the environmental behavior of PPCPs in aquatic are reviewed. The risk assessments of PPCPs in the water are summarized. The research directions of environmental toxicology research of PPCPs in the future are proposed. Many PPCPs were found to be toxic or even highly toxic toward aquatic organisms, and have the potential for bioaccumulation. It is essential to study the acute and long-term toxicity of PPCPs and their metabolites, evaluate the environmental behaviors and make a reasonable assessment of ecotoxicology and human health risks of PPCPs.