Fluorescent and colorimetric dual-mode detection of tetracycline in wastewater based on heteroatoms-doped reduced state carbon dots

Covalent Organic Framework-Involved Sensors for Efficient Enrichment and Monitoring of Food Hazards: A Systematic Review

The food safety issues caused by environmental pollution have posed great risks to human health that cannot be ignored. Hence, the precise monitoring of hazard factors in food has emerged as a critical concern for the food safety sector. As a novel porous material, covalent organic frameworks (COFs) have garnered significant attention due to their large specific surface area, excellent thermal and chemical stability, modifiability, and abundant recognition sites. This makes it a potential solution for food safety issues. In this research, the synthesis and regulation strategies of COFs were reviewed. The roles of COFs in enriching and detecting food hazards were discussed comprehensively and extensively. Taking representative hazard factors in food as the research object, the expression forms and participation approaches of COFs were explored, along with the effectiveness of corresponding detection methods. Finally, the development directions of COFs in the future as well as the problems existing in practical applications were discussed, which was beneficial to promote the application of COFs in food safety and beyond.

Construction of colorimetric sensor arrays using steel slag-based composites for highly sensitive detection of tetracycline antibiotics

Sensor array methods have received much attention in recent years. In this study, a colorimetric sensor array consisting of three kinds of steel slag-based composites (including porphyrin-functionalized non-magnetic steel slag (NMSS-Por), alkali-excited steel slag (A-SS), and platinum modified steel slag (ALANH-Pt)) was developed for the detection and recognition of tetracycline antibiotics (TCs) such as tetracycline (TC), oxytetracycline (OTC) and doxycycline (DOX). Linear discriminant analysis (LDA) and hierarchical cluster analysis (HCA) showed that the colorimetric sensor array has excellent recognition ability for TCs. The detection limits of this sensor array for TC, OTC, and DOX were 0.059 μM, 0.111 μM and 0.118 μM, respectively, which provided higher sensitivity compared to the colorimetric sensors composed of a single steel slag-based composite material. At the same time, the array sensor has anti-interference ability, and this study provides a new application route for steel slag.

A review on green synthesis, biological applications of carbon dots in the field of drug delivery, biosensors, and bioimaging

Since the beginning of nanoscience and nanotechnology, carbon dots (CDs) have been the foundational idea and have dominated the growth of the nano-field. CDs are an intriguing platform for utilization in biology, technology, catalysis, and other fields thanks to their numerous distinctive structural, physicochemical, and photochemical characteristics. Since several carbon dots have already been created, they have been assessed based on their synthesis process, and luminescence characteristics. Due to their biocompatibility, less toxic effects, and most significantly their fluorescent features in contrast to other carbon nanostructures, CDs have several benefits. This review focuses on the most recent advancements in the characterization, applications, and synthesis techniques used for CDs made from natural sources. It will also direct scientists in the creation of a synthesis technique for adjustable carbon dots that is more practical, effective, and environmentally benign. With low toxicity and low cost, CDs are meeting the new era's requirements for more selectivity and sensitivity in the detection and sensing of various things, such as biomaterial sensing, enzymes, chemical contamination, and temperature sensing. Its variety of properties, such as optical properties, chemiluminescence, and morphological analysis, make it a good option to use in bioimaging, drug delivery, biosensors, and cancer diagnosis.

Room temperature, ultrafast and one-step synthesis of highly fluorescent sulfur quantum dots probe and their logic gate operation

The direct and rapid conversion of abundant and cheap elemental sulfur into fluorescent sulfur quantum dots (SQDs) at room temperature is a critical and urgent challenge. Conventional synthesis methods require high temperatures, high pressures, or specific atmospheric conditions, making them complex and impractical for real applications. Herein, we propose a simple method for synthesizing SQDs simply by adding H2O2 to an elemental sulfur-ethylenediamine (S-EDA) solution at room temperature. Remarkably, within a mere 10 min, SQDs with a photoluminescence quantum yield of 23.6 % can be obtained without the need for additional steps. A comprehensive analysis of the mechanism has demonstrated that H2O2 is capable of converting Sx2- ions generated in the S-EDA solution into zero-valent sulfur atoms through oxidation. The obtained SQDs can be utilized as a fluorescent probe for detection of tetracycline (TC) and Ca2+ ions with the limit of detection (LOD) of 0.137 μM and 0.386 μM respectively. Moreover, we have developed a sensitive logic gate sensor based on SQDs, harnessing the activated cascade effect to create an intelligent probe for monitoring trace levels of TC and Ca2+ ions. This paper not only presents a viable approach for ultrafast and scalable synthesis of SQDs at room temperature, but also contributes to the efficient utilization of elemental sulfur resources.

Electron transfer mediated photo-Fenton-like synergistic catalysis of Fe,Cu-doped MIL-101 coupled with Ag3PO4: Quantitative evaluation and DFT calculations

Widespread use of tetracycline (TC) results in its persistent residue and bioaccumulation in aquatic environments, posing a high toxicity to non-target organisms. In this study, a bimetal-doped composite material Ag3PO4/MIL-101(Fe,Cu) has been designed for the treatment of TC in aqueous solutions. As the molar ratio of Fe/Cu in composite is 1:1, the obtained material AP/MFe1Cu1 is placed in an aqueous environment under visible light irradiation in the presence of 3 mM peroxydisulfate (PDS), which forms a photo-Fenton-like catalytic system that can completely degrade TC (10 mg/L) within 60 min. Further, the degradation rate constant (0.0668 min-1) is 5.66 and 7.34 times higher than that of AP/MFe and AP/MCu, respectively, demonstrating a significant advantage over single metal-doped catalysts. DFT calculations confirm the strong adsorption capacity and activation advantage of PDS on the composite surface. Therefore, the continuous photogenerated electrons (e-) accelerate the activation of PDS and the production of SO4•-, resulting in the stripping of abundant photogenerated h + for TC oxidation. Meanwhile, the internal circulation of FeⅢ/FeⅡ and CuⅡ/CuⅢ in composite also greatly enhances the photo-Fenton-like catalytic stability. According to the competitive dynamic experiments, SO4•- have the greatest contribution to TC degradation (58.93%), followed by 1O2 (23.80%). The degradation intermediates (products) identified by high-performance liquid chromatography-mass spectrometry (HPLC/MS) technique indicate the involvement of various processes in TC degradation, such as dehydroxylation, deamination, N-demethylation, and ring opening. Furthermore, as the reaction proceeds, the toxicity of the intermediates produced during TC degradation gradually decreases, which can ensure the safety of the aquatic ecosystem. Overall, this work reveals the synergy mechanism of PDS catalysis and photocatalysis, as well as provides technical support for removal of TC-contaminated wastewater.

Carbon and graphene quantum dots based architectonics for efficient aqueous decontamination by adsorption chromatography technique - Current state and prospects

Aquatic ecosystems and potable water are being exploited and depleted due to urbanization and the encouragement of extensive industrialization, which induces the scarcity of pure water. However, current decontamination methods are limited and inefficient. Various innovative remediation strategies with novel nanomaterials have recently been demonstrated for wastewater treatment. Carbon dots (C-dots) and graphene quantum dots (GQ-dots) are the most recent frontiers in carbon nanomaterial-based adsorption studies. C-dots are extremely small (1-10 nm) quasi-spherical carbon nanoparticles (mostly sp3 hybridized carbon), whereas GQ-dots are fragments of graphene (1-20 nm) composed of primarily sp2 hybridized carbon. This article highlights the function of C-dots and GQ-dots with their specifications and characteristics for the efficient removal of organic and inorganic contaminants in water via adsorption chromatography. The alteration of adsorption attributes with the hybrid blending of these dots has been critically analyzed. Moreover, various top-down and bottom-up approaches for synthesizing C-dots and GQ-dots, which ultimately affect their morphology and structure, are described in detail. Finally, we review the research deficit in the adsorption of diverse pollutants, fabrication challenges, low molecular weight, self-agglomeration, and the future of the dots by providing research prospects and selectivity and sensitivity perspectives, the importance of post-adsorption optimization strategies and the path toward scalability at the tail of the article.

Smartphone-based sensing and in vivo and in vitro imaging of Mn(VII) based on nitrogen-doped red fluorescent carbon dots

Smartphone-assisted visual assay platform provides novel insight for the real-time in-field quantitation of intended analytes in resource-insufficient areas. Herein, nitrogen-doped red fluorescent (FL) carbon dots (R-CDs) were developed for the timely on-site quantitation of Mn(VII) using the smartphone-assisted assay platform. R-CDs, possessing a desirable bright red FL at 616 nm under a 470 nm excitation, were fabricated through hydrothermal treatment adopting passion fruit and neutral red as precursors. Interestingly, bright red FL at 616 nm are gradually quenched upon introducing Mn(VII) based on the inner filter effect, concurrently accompanying with significant FL color variation from bright red to dark red. Inspired by the above-mentioned phenomena, hue-saturation-values (HSV) of real-time captured images could be precisely quantified through a color recognition APP within the smartphone, of which the V/S values could be employed to quantify Mn(VII) with a linear range of 50-400 μM. Furthermore, confocal fluorescence imaging of HeLa cells and zebrafish larvae demonstrates that R-CDs could be employed for the visual determination of Mn(VII) in vivo and in vitro, illustrating that R-CDs possess powerful practical application prospect in biosystem.

Pristine and Fe-functionalized biochar for the simultaneous immobilization of arsenic and antimony in a contaminated mining soil

This study examined the effectiveness of pristine biochar (BC) and Fe-functionalized biochar (FBC) in remediating As-Sb co-contaminated soil, and revealed the resulting impact on soil enzymatic activities and bacterial communities. Results from incubation experiments showed that the 1.5% FBC treatment reduced the bioavailable As and Sb concentration by 13.5% and 27.1%, respectively, in compared to the control, and reduced the proportion of specifically adsorbed and amorphous Fe-Mn oxide-bound metal(loid) fractions in the treated soil. Among the BC treatments, only the 1.5% BC treatment resulted in a reduction of bioavailable As by 11.7% and Sb by 21.4%. The 0.5% BC treatment showed no significant difference. The FBC achieved high As/Sb immobilization efficiency through Fe-induced electrostatic attraction, π-π electron donor-acceptor coordination, and complexation (Fe-O(H)-As/Sb) mechanisms. Additionally, the 1.5% FBC treatment led to a 108.2% and 367.4% increase in the activities of N-acetyl-β-glucosaminidase and urease in soils, respectively, compared to the control. Furthermore, it significantly increased the abundance of Proteobacteria (15.2%), Actinobacteriota (37.0%), Chloroflexi (21.4%), and Gemmatimonadota (43.6%) at the phylum level. Co-occurrence network analysis showed that FBC was better than BC in increasing the complexity of bacterial communities. Partial least squares path modeling further indicated that the addition of biochar treatments can affect soil enzyme activities by altering soil bacterial composition. This study suggests that FBC application offers advantages in simultaneous As and Sb immobilization and restructuring the bacterial community composition in metal(loid)-contaminated soil.

Fluorimetric determination of tetracycline antibiotics in animal derived foods using boron and nitrogen co-doped ceria-based nanoparticles

An innovative synthesis of boron and nitrogen co-doped ceria-based nanoparticles (B/N-CeFNPs) with bright blue fluorescence emission is reported using the hydrothermal method. Based on the aggregation-induced emission enhancement (AIEE) effect between B/N-CeFNPs and chlortetracycline (CTC), a rapid detection method for CTC through fluorescence enhancement was developed. In addition, through the electron transfer process (ET), fluorescence resonance energy transfer (FRET) effect and static quenching between B/N-CeFNPs and oxytetracycline (OTC), a ratio fluorescence strategy for detecting OTC was generated. The fluorescence of B/N-CeFNPs at 410 nm can be effectively quenched by OTC, and new fluorescence emission appears at a wavelength of 500 nm. B/N-CeFNPs showed good linear responses with CTC and OTC in the range 0.1-1 µM and 1-40 µM, respectively. This system was used to simultaneously detect the CTC and OTC in milk and honey, realizing multi-residues detection of TCs in actual samples by using the same ceria-based fluorescence nanomaterial.

Enhanced visible light photocatalytic activity of octopod Ag3PO4 microcrystals with high index crystal faces

Novel octopod shaped Ag3PO4 microcrystals were successfully fabricated by a simple ion exchange method under the conditions of a hot water bath using [Ag(NH3)2]+ solution and Na2HPO4 solution as the precursors. Meanwhile, sphere and cube shaped Ag3PO4 microcrystals were also prepared followed by changing reaction materials as well as temperature. The surface morphology, microstructure and photocatalytic performance were investigated on the three different shaped crystals respectively. Compared to sphere and cube counterparts, the obtained octopod shaped Ag3PO4 crystals possess 8 symmetric feet with sharp tips and exhibit higher photocatalytic activity and better cycle stability. After further exploring its formation process, UV-vis diffusion reflectance properties as well as photocurrent transient response, it was found that the Ag3PO4 octopod had exposed high index crystal faces, and possessed a narrow band gap as well as high photoexcited transient charge separation efficiency. The results show that the improved photocatalytic activity of octopod shaped Ag3PO4 is mainly due to the synergistic action of the strong light absorption capacity and high carrier separation efficiency. These results highlight the tremendous practical application of octopod Ag3PO4 microcrystals in visible light photocatalysis.

Synthesis of water-soluble CdS quantum dots for the fluorescence detection of tetracycline

An effective strategy for combating antibiotic-resistant bacteria (ARB) entails the early detection of antibiotics during the initial stages of water treatment facilities. In this context, cadmium sulfide quantum dots (CdS QDs) were employed for the precise detection of tetracycline (TET), an emerging contaminant, in water. CdS QDs with fluorescence properties were synthesized by culturing Citrobacter freundii bacteria. The CdS QDs were characterized by spectroscopy techniques, and the quantum efficiency was estimated to be 55.8% which is ∼2-fold high compared to the standard rhodamine-B solution. The fluorescence of CdS QDs was quenched at 440 nm in the presence of TET. The linear range of TET was varied from 10 to 100 μM with a lower limit of detection of ∼23 nM. The CdS QDs were used to detect TET in river water, tap water, and milk which showed an excellent recovery rate. Therefore, the novel biosynthesis CdS QDs can be a significant fluorescence probe for the detection of TET that shows exceptional sensitivity and selectivity.

Fluorescent/Colorimetric Dual-Mode Discriminating Gln and Val Enantiomers Based on Carbon Dots

Discrimination and quantification of amino acid (AA) enantiomers are particularly important for diagnosing and treating diseases. Recently, dual-mode probes have gained a lot of research interest because they can catch more detecting information compared with the single-mode probes. Thus, it is of great significance to develop a dual-mode sensor realizing AA enantiomer discrimination conveniently and efficiently. In this work, carbon dot L-TCDs were prepared by N-methyl-1,2-benzenediamine dihydrochloride (OTD) and l-tryptophan. With the assistance of H2O2, L-TCDs show an excellent discrimination performance for enantiomers of glutamine (Gln) and valine (Val) in both fluorescent and colorimetric modes. The fluorescence enantioselectivity of Gln (FD/FL) and Val (FL/FD) is 5.29 and 4.13, respectively, and the colorimetric enantioselectivity of Gln (ID/IL) and Val (IL/ID) is 13.26 and 3.42, individually. The chiral recognition mechanism of L-TCDs was systematically studied. L-TCDs can be etched by H2O2, and the participation of AA enantiomers results in different amounts of the released OTD, which provides fluorescent and colorimetric signals for identifying and quantifying the enantiomers of Gln and Val. This work provides a more convenient and flexible dual-mode sensing strategy for discriminating AA enantiomers, which is expected to be of great value in facile and high-throughput chiral recognition.

Pure and doped carbon quantum dots as fluorescent probes for the detection of phenol compounds and antibiotics in aquariums

The resulting antibiotic residue and organic chemicals from continuous climatic change, urbanization and increasing food demand have a detrimental impact on environmental and human health protection. So, we created a unique B, N-CQDs (Boron, Nitrogen doping carbon quantum dots) based fluorescent nanosensor to investigate novel sensing methodologies for the precise and concentrated identification of antibiotics and phenol derivatives substances to ensure that they are included in the permitted percentages. The as-prepared highly fluorescent B, N-CQDs had a limited range of sizes between 1 and 6 nm and average sizes of 2.5 nm in our study. The novel B, N-CQDs showed high sensitivity and selectivity for phenolic derivatives such as hydroquinone, resorcinol, and para aminophenol, as well as organic solvents such as hexane, with low detection limits of 0.05, 0.024, 0.032 and 0.013 µM respectively in an aqueous medium. The high fluorescence B, N-CQDs probes were examined using transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and UV/VIS spectroscopy. The outcomes were compared to carbon quantum dots (CQDs) previously generated from Urea.

Hollow porphyrin-based porous organic polymer with dual enzyme-like activities for ultra-fast colorimetric detection of Cr (VI) in wastewater

A hollow porphyrin-based porous organic polymer (H-Fe-POP) was prepared for rapid and sensitive colorimetric determination of Cr(VI), which exhibited excellent dual enzyme-like activities, including oxidase-like and peroxidase-like activities. Due to the specific binding of 8-hydroxyquinoline (8-HQ) to Cr(VI), 3,3',5,5'-tetramethylbenzidine (TMB) was liberated, and TMB was oxidized to blue ox-TMB catalyzed by H-Fe-POP. Based on the excellent oxidase-like activity of H-Fe-POP, an ultra-fast colorimetric platform for the detection of Cr(VI) was constructed, allowing the quantification of Cr(VI) in the range 2-130 μM within 30 s with a detection limit of 0.23 μM. Importantly, the sensor can accurately determine Cr(VI) in industrial wastewater, indicating its high potential for environmental monitoring.

Nanomaterial-based fluorescent biosensors for the detection of antibiotics in foodstuffs: A review

Antibiotics are widely used as bacteriostatic or bactericidal agents against various microbial infections in humans and animals. The excessive use of antibiotics has led to an accumulation of their residues in food products, which ultimately poses a threat to human health. In light of the shortcomings of conventional methods for antibiotic detection (primarily cost, proficiency, and time-consuming procedures), the development of robust, accurate, on-site, and sensitive technologies for antibiotic detection in foodstuffs is important. Nanomaterials with amazing optical properties are promising materials for developing the next generation of fluorescent sensors. In this article, advances in detecting antibiotics in food products are discussed with respect to their sensing applications, with a focus on fluorescent nanomaterials such as metallic nanoparticles, upconversion nanoparticles, quantum dots, carbon-based nanomaterials, and metal-organic frameworks. Furthermore, their performance is evaluated to promote the continuation of technical advances.

Waste to value transformation: Converting Carica papaya seeds into green fluorescent carbon dots for simultaneous selective detection and degradation of tetracycline hydrochloride in water

Rampant use of antibiotics has resulted in their seepage into groundwater and ultimately ending up in the food chain, causing antimicrobial resistance. To address this issue, it is imperative to not only quantitatively detect but eliminate them from water. An eco-friendly, one-step microwave-induced pyrolysis of waste papaya seeds (PS) with ethylenediamine (EDA) for just 5min gave green fluorescent nitrogen-doped carbon dots (PS-CDs), which are capable of detecting and photocatalytically degrading TC. The fluorescence properties of PS-CDs displayed that it has high sensitivity and selectivity towards sensing of TC with a detection limit as low as 120 nM. Also, the method gave satisfactory recovery results when extrapolated to determine TC in spiked milk, orange juice, tap water, and honey samples. On the other hand, PS-CDs alone potentially function as an efficient photocatalyst for the degradation of TC. PS-CDs' dual functionality provides an effectual method for the simultaneous detection and degradation of TC by a single nanoprobe.

Xylenol orange-modified CdTe quantum dots as a fluorescent/colorimetric dual-modal probe for anthrax biomarker based on competitive coordination

Bacillus anthracis spores can make humans infected with vicious anthrax, so it is significant to detect their biomarker 2,6-pyridinedicarboxylic acid (DPA). The development of dual-modal methods for DPA detection that are more flexible in practical applications remains a challenge. Herein, colorimetric xylenol orange (XO) was modified on fluorescent CdTe quantum dots (QDs) for dual-modal detection of DPA through competitive coordination. After the binding of XO on CdTe QDs via coordination with Cd²⁺, CdTe QDs displayed quenched red fluorescence and the bound XO was presented as red color. The competitive coordination of DPA with Cd²⁺ made XO released from CdTe QDs, causing the enhanced red fluorescence of CdTe QDs and the yellow color of free XO. On this basis, DPA was rapidly (1 min) quantified through fluorescent and colorimetric modes within the ranges of 0.1-5 μM and 0.5-40 μM, respectively. The detection limits for DPA were calculated as low as 42 nM and 240 nM, respectively assigned to fluorescent and colorimetric modes. The level of urinary DPA was further measured. Satisfactory relative standard deviations (fluorescent mode: 0.1%-10.2%, colorimetric mode: 0.8%-1.8%) and spiked recoveries (fluorescent mode: 100.0%-115.0%, colorimetric mode: 86.0%-96.6%) were obtained.

Preparation of molecularly imprinted ratiometric fluorescence sensor for visual detection of tetrabromobisphenol A in water samples

A sensitive molecularly imprinted ratiometric fluorescence sensor was constructed for the first time to visually detect tetrabromobisphenol A (TBBPA). The blue fluorescent carbon quantum dots (CQDs) were coated with SiO₂ through the reverse microemulsion method to obtain a stable internal reference signal CQDs@SiO₂. The ratiometric fluorescence sensor was finally prepared using red fluorescent CdTe QDs as the response signal in the presence of CQDs@SiO₂. When the molecularly imprinted polymers were combined with TBBPA, the fluorescence of CdTe QDs (Ex = 365 nm, Em = 665 nm) was rapidly quenched, while that of CQDs (Ex = 365 nm, Em = 441 nm) remained stable, resulting in a noticeable fluorescence color change. Moreover, the fluorescence intensity ratio (I₆₆₅/I₄₄₁)₀/(I₆₆₅/I₄₄₁) of the sensor showed a linear response to TBBPA in the concentration range 0.1 to 10 μM with a low detection limit of 3.8 nM. The prepared sensor was successfully applied to detect TBBPA in water samples. The recoveries were in the range 98.2-103%, with relative standard deviations lower than 2.5%. Furthermore, a fluorescent test strip for visual monitoring of TBBPA was constructed to streamline the procedure. The excellent results demonstrate that the prepared test strip has a broad prospect for the offline detection of pollutants.

Affinity-based alleviation of dissolved organic matter (DOM) on tetracycline toxicity to photosynthesis of green algae Chlorella vulgaris: roles of hydrophilic and hydrophobic DOM

The environmental fate and toxic effects of antibiotics such as tetracycline (TC) could be influenced by the ubiquitous dissolved organic matter (DOM). However, DOM from different origins has different hydrophilic and hydrophobic properties. It is still unknown the effects of hydrophilic and hydrophobic DOM on the toxic effect of TC. In this study, DOM with hydrophilicity and hydrophobicity was separated and used to investigate their roles in affecting TC toxicity to the photosynthesis of green algae Chlorella vulgaris. Results showed that 10 mg L^-1 TC inhibited the efficiency of photosystem II (PSII) of C. vulgaris using light by hindering electron transfer from Q_A^- to Q_B/Q_B^-, and the O₂ release rate of C. vulgaris decreased by a third after 12-h treatment of 10 mg L^-1 TC, while both hydrophilic and hydrophobic DOM (20 mg L^-1 TOC) alleviated TC toxicity to the photosynthesis of C. vulgaris. In the presence of hydrophilic or hydrophobic DOM, stable complex of TC-hydrophilic DOM or TC-hydrophobic DOM was formed immediately, due to the good affinity of both DOM for TC. Fourier transform infrared spectroscopy result showed that both hydrophilic and hydrophobic DOM could reduce C=O in TC to C-O, and isothermal titration calorimetry result suggested that reactions of both DOM with TC were exothermic (△H < 0) and spontaneous (△G < 0). Thereinto, the reaction constant (K_a) of TC reacting with hydrophobic DOM (K_a=9.70) was higher than that with hydrophilic DOM (K_a=8.93), indicating hydrophobic DOM with more chemical binding sites and accessible fractions for TC. The present study suggests that DOM, especially the hydrophobic DOM, is an important consideration in the environmental impact assessment of antibiotics.

A fluorescent and scattering dual-mode probe based on a carbon dot@cerium-guanosine monophosphate coordination polymer network for tetracycline detection

Dual-mode sensing with a two-signal read-out is conducive to the improvement of detection accuracy. Herein, a fluorescent and scattering dual-mode chemosensor for tetracycline (TC) is proposed based on a carbon dot@cerium-guanosine monophosphate (CD@GMP-Ce) coordination polymer network. The inexpensive CD@GMP-Ce was prepared by exploiting the adaptive inclusion capability of coordination polymers and possessed remarkable fluorescence and strong Rayleigh scattering. The functional CD@GMP-Ce demonstrated fluorescence and scattering, the two optical-signal responses to TC simultaneously. Based on TC-specific fluorescence and scattering decline, the dual-mode detection of TC was established and the probe's detection limits were 43 nM in the fluorescence mode and 77 nM in the scattering mode, respectively. Furthermore, the potential application of the dual-mode sensor was verified by measuring TC in milk and tap-water samples. The study not only provides a new perspective for the development of assay methods for TC but also expands the applications of cerium coordination polymers.

Improved photodegradation of antibiotics pollutants in wastewaters by advanced oxidation process based on Ni-doped TiO2

The number of antibiotic compounds in wastewaters has been growing globally due to the covid-19 problem. Using antibiotics to treat the patients would produce larger amounts of these compounds into the environment with negative impacts. Hence, finding out the method for the elimination of toxic organic pollutants as well as antibiotics in water is urgent (In this study, the treatment of antibiotic pollutants including cefalexin (CF) and tetracycline (TC) was investigated by applying the advanced oxidation process based on Ni-doped TiO₂ (Ni-TiO₂). The characterizations technologies such as XRD, XPS, UV-vis, PL, and PC indicated that Ni doping would improve the photocatalytic performance of TiO₂. In the photodegradation experiments, the Ni-TiO₂ possessed high photocatalytic degradation efficiencies with 93.6% for CF and 82.5% for TC. Besides, the removal rates of antibiotics after five cycles are higher than 75%, implying excellent stability of Ni-TiO₂ photocatalyst. The result from the treatment of wastewater samples revealed that the Ni-TiO₂ photocatalytic had good performance for removal of CF and TC at a high level of 88.6 and 80.2%, respectively.

Ratiometric fluorescence and visual determination of tetracycline antibiotics based on Y3+ and copper nanoclusters-induced cascade signal amplification

A ratiometric fluorescence probe is proposed for sensitive and visual detection of tetracyclinee (TC) based on cascade fluorescence signal amplification induced by bovine serum albumin-stabilized copper nanoclusters (BSA-CuNCs) and yttrium ions (Y³⁺). TC can combine with Y³⁺ to form the complex (TC-Y³⁺) to enhance the fluorescence of TC at 515 nm. Then, positively charged TC-Y³⁺ and negatively charged BSA-CuNCs was bonded together by electrostatic interactions to achieve the fluorescence resonance energy transfer (FRET) process. With the increase of TC concentration, the fluorescence intensity of TC-Y³⁺ at 515 nm (F₅₁₅) gradually increased; meanwhile, the fluorescence intensity of BSA-CuNCs at 405 nm (F₄₀₅) decreased gradually. The ratio of F₅₁₅ and F₄₀₅ was used for the quantitative determination of TC. The linear range of the constructed fluorescent probe is 1.0 to 60.0 μM, and the limit of detection is 0.22 μM. The method was successfully applied to the determination of TC in spiked milk with recoveries ranging from 94.3 to 112%. Furthermore, the color of this platform can be observed from dark violet to bright green under the UV lamp. Since the response time of the reaction is less than 10 s, an intelligent sensing platform based on the use of the smartphone as image acquisition equipment was also established to realize rapid on-site and portable detection of TC through the colorimetric recognition application.

Construction of Electrochemical Sensors for Antibiotic Detection Based on Carbon Nanocomposites

Excessive antibiotic residues in food can cause detrimental effects on human health. The establishment of rapid, sensitive, selective, and reliable methods for the detection of antibiotics is highly in demand. With the inherent advantages of high sensitivity, rapid analysis time, and facile miniaturization, the electrochemical sensors have great potential in the detection of antibiotics. The electrochemical platforms comprising carbon nanomaterials (CNMs) have been proposed to detect antibiotic residues. Notably, with the introduction of functional CNMs, the performance of electrochemical sensors can be bolstered. This review first presents the significance of functional CNMs in the detection of antibiotics. Subsequently, we provide an overview of the applications for detection by enhancing the electrochemical behaviour of the antibiotic, as well as a brief overview of the application of recognition elements to detect antibiotics. Finally, the trend and the current challenges of electrochemical sensors based on CNMs in the detection of antibiotics is outlined.

A ratiometric fluorescent sensor for tetracyclines detection in meat based on pH-dependence of targets with lanthanum-doped carbon dots as probes

Although some ratiometric fluorescent sensors have been reported to detect tetracyclines, most of ratiometric fluorescent sensors were established based on europium ion with a narrow linear range. In this work, a ratiometric fluorescent sensor for tetracyclines detection was established based on the dual-emission lanthanum-doped carbon dots (La-CDs) as probes combining with the characteristic pH-response of tetracyclines. The fluorescence intensity of tetracyclines will be enhanced in high pH, and the emission peak of tetracyclines overlapped with the peak of probes. The superposition effect of tetracyclines and probes at 515 nm greatly improved the sensitivity of the ratiometric fluorescent sensor and widened the detection range, and linear ranges for oxytetracycline (OTC) and tetracycline (TC) were respectively 0.00-805.20 μM and 0.00-1039.50 μM. Moreover, the preparation procedure of the La-CDs was simple and time saving and the coupling agent was not required. A comparison of La-CDs with undoped carbon dots (un-CDs) showed that the optical performance and sensing performance of La-CDs were improved. In addition, a portable paper sensor with La-CDs as probes was preliminarily explored in this work, and the sensor has been applied to detect OTC and TC in pork and fish with satisfactory results.

Recent progress of carbon dot fluorescent probes for tetracycline detection

We made a detailed discussion about TCs and CDs, including the synthetic methods, doping strategies and promising prospects.

A Simple and Sensitive Nanogold RRS/Abs Dimode Sensor for Trace As3+ Based on Aptamer Controlled Nitrogen Doped Carbon Dot Catalytic Amplification

Using citric acid (CA) and ethylenediamine (EDA) as precursors, stable nitrogen-doped carbon dots (CD) nanosols were prepared by microwave procedure and characterized in detail. It was found that CD_Ns catalyze ethanol (Et)-HAuCl₄ to generate gold nanoparticles (AuNPs), which have strong surface plasmon resonance, Rayleigh scattering, (RRS) and a surface plasmon resonance (SPR) absorption (Abs) effect at 370 nm and 575 nm, respectively. Compled the new catalytic amplification indicator reaction with the specific As³⁺ aptamer reaction, a new RRS/Abs dual-mode aptamer sensor for the assay of trace As³⁺ was developed, based on the RRS/Abs signals increasing linearly with As³⁺ increasing in the ranges of 5-250 nmol/L and 50-250 nmol/L, whose detection limits were 0.8 nmol/L and 3.4 nmol/L As³⁺, respectively. This analytical method has the advantages of high selectivity, simplicity, and rapidity, and it has been successfully applied to the detection of practical samples.