Removal of Cd from aqueous solution by chitosan coated MgO-biochar and its in-situ remediation of Cd-contaminated soil

Mechanisms for synergistically enhancing cadmium remediation performance of biochar: Silicon activation and functional group effects

This work proposes an advanced biochar material (β-CD@SiBC) for controllable transformation of specific silicon (Si) forms through endogenous Si activation and functional group introduction for efficient cadmium (Cd) immobilization and removal. The maximum adsorption capacity of β-CD@SiBC for Cd(II) reached 137.6 mg g-1 with a remarkable removal efficiency of 99 % for 200 mg L-1Cd(II). Moreover, the developed β-CD@SiBC flow column exhibited excellent performance at the environmental Cd concentration, with the final concentration meeting the environmental standard for surface water quality (0.05 mg L-1). The remediation mechanism of β-CD@SiBC could be mainly attributed to mineral precipitation and ion exchange, which accounted for 42 % and 29 % of the remediation effect, respectively, while functional group introduction enhanced its binding stability with Cd. Overall, this work proposes the role and principle of transformation of Si forms within biochar, providing new strategies for better utilizing endogenous components in biomass.

Removal of Cd from solution and in-situ remediation of Cd-contaminated soil by a mercapto-modified cellulose/bentonite intercalated nanocomposite

A novel intercalated nanocomposite of mercapto-modified cellulose/bentonite (LCS-BE-SH) was synthesized by high-speed shearing method in one step at room temperature, and was applied to remove Cd from solution and remediate Cd-contaminated soil. Results revealed that cellulose long-chain molecules have intercalated into bentonite nanolayers and interlayer spacing was increased to 1.411 nm, and grafting -SH groups improved adsorption selectivity, which enabled LCS-BE-SH to have distinct capability of Cd adsorption (qmax = 147.21 mg/g). Kinetic and thermodynamics showed that Cd adsorption onto LCS-BE-SH was well fitted by pseudo-second-order and Langmuir adsorption isotherm. Characterizations of the adsorbents revealed that synergistic effect of complexation (e.g., CdS, CdO) and precipitation (e.g., Cd(OH)2, CdCO3) mechanism played a major role in Cd removal. In soil remediation, application of LCS-BE-SH was most effective (67.31 %) in Cd immobilization compared to the control (8.85 %), which reduced exchangeable Cd from 37.03 % to 11.44 %. Meanwhile, soil pH, soil organic matter, available phosphorus, and enzyme activities (catalase, urease, and dehydrogenase) were improved LCS-BE-SH treatment. The main immobilization mechanism in soil included complexation (e.g., CdS, CdO) and precipitation (e.g., Cd(OH)2, Cd-Fe-hydroxide). Overall, this work applied a promising approach for Cd removal in aqueous and Cd remediation in soil by using an effective eco-friendly LCS-BE-SH nanocomposites.

Pyrolysis of exhausted biochar sorbent: Fates of cadmium and generation of products

Biochar is a promising sorbent for Cd removal from water, while the disposal of the exhausted Cd-enriched biochar remains a challenge. In this study, pyrolysis was employed to treat the exhausted biochar under N2 and CO2 atmospheres at 600-900 °C, and the fate of Cd during pyrolysis and characteristics of high-valued products were determined. The results indicated that higher temperature and CO2 atmosphere favored the volatilization of Cd. Based on the toxicity characteristic leaching procedure (TCLP) results, the pyrolysis treatment under both atmospheres enhanced the stability of Cd, and the leached Cd concentration of regenerated biochar obtained at high temperatures (>800 °C) was lower than 1 mg/L. Compared with the pristine biochar, the regenerated biochar demonstrated higher carbon content and pH, whereas the contents of oxygen and hydrogen declined, and exhibited promising sorption properties (35.79 mg/g). The atmosphere played an important role in modifying biochar properties and syngas composition. The N2 atmosphere facilitated CH4 production, whereas the CO2 atmosphere increased the proportion of CO. These results implied that pyrolysis can be a valuable and environmental-friendly strategy for the treatment and reuse of exhausted biochar sorbent.

Exploring metal(loid)s dynamics and bacterial community shifts in contaminated paddy soil: Impact of MgO-laden biochar under different water conditions

In this study, a soil incubation experiment was conducted to explore the influence MgO-treated corn straw biochar (MCB) on the bioavailability and chemical forms of cadmium (Cd), lead (Pb), and arsenic (As), alongside the impact on the bacterial community within paddy soil subjected to both flooded and non-flooded conditions. Raw corn straw biochar (CB) served as the unmodified biochar control, aiding in the understanding of the biochar's role within the composite. The results showed that even at a minimal concentration of 0.5 %, MCB exhibited higher effectiveness in reducing the bioavailability of Pb and Cd compared to 1 % CB. In non-flooded conditions, 0.5 % MCB reduced the bioavailable Pb and Cd by 99.7 % and 87.4 %, respectively, while NaH2PO4-extracted As displayed a 14.5 % increase. With increasing MCB concentrations (from 0.5 % to 1.5 %), soil pH, DOC, EC, available phosphorus, and bioavailable As increased, while bioavailable Pb and Cd exhibited declining tendencies. Flooding did not notably alter MCB's role in reducing Pb and Cd bioavailability, yet it systematically amplified As release. Heavy metal fractions extracted by acetic acid increased in the MCB groups under flooding conditions, especially for As. The inclusion of 0.5 % MCB did not noticeably affect bacterial diversity, whereas higher doses led to reduced diversity and substantial changes in community composition. Specifically, the groups with MCB showed an increase in the Bacteroidetes and Proteobacteria phyla, accompanied by a decrease in Acidobacteria. These alterations were primarily attributed to the increased pH and EC resulting from MgO hydrolysis. Consequently, for Pb/Cd stabilization and soil bacterial diversity, a low dosage of MgO-treated biochar is recommended. However, caution is advised when employing MgO-treated biochar in soils with elevated arsenic levels, particularly under flooded conditions.

An environmentally friendly strategy for reducing the environmental risks of heavy metals adsorbed by kaolinite

Plenty of heavy metals (HMs) that are adsorbed on clay minerals (such as kaolinite), in addition to low molecular-weight organic acids (such as oxalic acid (OA)) with high activities, are widespread in the natural environment. In the present study, the effects of OA on the environmental behaviors of Pb2+/Cd2+ adsorbed by kaolinite have been investigated. The effectiveness and mechanisms of calcium silicate (CS) and magnesium silicate (MS) in reducing the environmental risks of the HMs have also been studied. The results showed that the releases of Pb2+/Cd2+ increased with an increasing concentration of OA. When different dosages of CS/MS were added to the aging system, a redistribution of HMs took place and the free form of Pb2+/Cd2+ decreased to very low levels. Also, the unextractable Pb2+/Cd2+ increased to high levels. Furthermore, a series of characterizations showed that the released HMs were re-captured by the CS/MS. In addition, the CS immobilized the OA in the solution during the aging process, which also facilitated an immobilization of the carbon element in the environment. In general, the present study has contributed to a further understanding of the transport behaviors of the HMs in natural environments, and of the interactions between CS (or MS), the environmental media, and the heavy metal contaminants. In addition, this study has also provided an eco-friendly strategy for an effective remediation of heavy metal pollution.

Adsorption of Cd(II) ions on magnetic graphene oxide/cellulose modified with β-cyclodextrin: Analytical interpretation via statistical physics modeling and fractal like kinetic approach

In the present study, β-cyclodextrin modified magnetic graphene oxide/cellulose (CN/IGO/Cel) was fabricated for removal of Cd(II) ions. The material was characterized through various analytical techniques like FTIR, XRD, TGA/DTA, SEM, TEM, and XPS. The point of zero charge of the material was obtained as 5.38. The controllable factors were optimized by Taguchi design and optimum values were: adsorbent dose-16 mg, equilibrium time-40 min, and initial concentration of Cd(II) ions-40 mg/L. The material shows high adsorption capacity (303.98 mg/g). The good fitting of Langmuir model to adsorption data (R2 = 0.9918-0.9936) revealed the monolayer coverage on adsorbent surface. Statistical physics model M 2 showed best fitting to adsorption data (R2 > 0.997), suggesting the binding of Cd(II) ions occurred on two different receptor sites (n). Stereographically n > 1 confirming vertical multi-molecular mechanisms of Cd(II) ions adsorption on CN/IGO/Cel surface. The adsorption energies (E1 = 23.71-28.95 kJ/mol; E2 = 22.69-29.38 kJ/mol) concluded the involvement of physical forces for Cd(II) ions adsorption. Kinetic data fitted well to fractal-like pseudo first-order model (R2 > 0.9952), concluding the adsorption of Cd(II) ions occurred on energetically heterogeneous surface. The kinetic analysis shows that both the film-diffusion and pore-diffusion were responsible for Cd(II) ions uptake. XPS analysis was utilized to explain the adsorption mechanism of Cd(II) ions onto CN/IGO/Cel.

Insight into the impacts of pyrolysis time on adsorption behavior of Pb2+ and Cd2+ by Mg modified biochar: Performance and modification mechanism

Co-pyrolysis biomass and alkaline metals can effectively improve the adsorption performance of heavy metals (HM). Nevertheless, the researchers have ignored the relationship between the change of alkaline metal morphology and adsorption during pyrolysis. In this article, according to control the pyrolysis time (30, 60, and 180 min) synthesized Magnesium (Mg) modified biochar (MBCX) by using MgCl2·6H2O and soybean straw under 400 °C. The sorption capacities of MBC60 and MBC180 for Pb2+/Cd2+ increased by 38.65%/213.29%, 44.57%/230.36%, and the selectivity coefficient of Pb2+/Cd2+ increased by 113.28%/209.49%, 213.58%/253.62%, respectively, compared with MBC30. Additionally, the characterization results demonstrated that MgO dominated the surface phases of MBC60 and MBC180, whereas MgCl2 dominated the surface phases of MBC30. Moreover, according to the results of DFT calculation, the adsorption energy (Eads) of MgO for Pb2+ (-0.537 eV) and Cd2+ (-0.347 eV) was lower than that of MgCl2 (Pb2+: 0.37 eV, Cd2+: -0.185 eV), so that, MBC60 and MBC180 had higher sorption capacities for Pb2+ and Cd2+ than MBC30. Therefore, this work provides a new sight to clear the mechanism for modified biochar by alkali metal oxide and practical and theoretical guidance for adsorbent preparation with high adsorption ability for HMs.

Mixed solvent fabrication of tobermorite and the fixation of heavy metals in water and soil

Here, tobermorite was prepared by a solvothermal technology using calcite and quartz with a mixed solvent of ethanol and water. Factors including reaction temperature, time and KOH content were studied to optimize the preparation procedure. To study the relationship between ethanol content-material structural characteristics-adsorption capacity, a series of materials were prepared in different mixed solvent proportions of ethanol and water, and their structural characteristics and adsorption capacity were compared. We found that the adsorption capacity of different samples for Pb2+ and Cd2+ was positively correlated with negatively correlated with the surface area and negatively correlated with the crystallinity of materials. Then, the material prepared by 30% ethanol solution (30-T) with the best adsorption performance was used for further research; the results were fitted by kinetic and thermodynamic models, and adsorbed materials were analyzed by various characterizations, suggesting that the adsorption process was ascribed to comprehensive pathways including ion exchange, chemical precipitation, and surface-complexation. Then, the 30-T was further used to remediate heavy metals contaminated soil, and the remediation effect was examined by the DTPA-extractable method and the European Community Bureau of Reference (BCR) sequential extraction method. The DTPA-extractable results showed that tobermorite observably reduced the bioavailability of Pb and Cd, and the BCR results suggested that the acid-soluble and reducible fractions of Pb and Cd were transformed to the oxidizable and residual fractions after remediation. In summary, tobermorite has great potential in the remediation of heavy metal polluted-aquatic environment/system and soil.

Improving the Durability of Chitosan Films through Incorporation of Magnesium, Tungsten, and Graphene Oxides for Biomedical Applications

Bacterial infections that cause chronic wounds provide a challenge to healthcare worldwide because they frequently impede healing and cause a variety of problems. In this study, loaded with tungsten oxide (WO3 ), Magnesium oxide (MgO), and graphene oxide (GO) on chitosan (CS) membrane, an inexpensive polymer casting method was successfully prepared for wound healing applications. All fabricated composites were characterized by X-ray powder diffraction (XRD), Fourier transforms infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). A scanning electron microscope (SEM) was used to study the synthesized film samples' morphology as well as their microstructure. The formed WO3/MgO@CS shows a great enhancement in the UV/VIS analysis with a highly intense peak at 401 nm and a narrow band gap (3.69 eV) compared to pure CS. The enhanced electron-hole pair separation rate is responsible for the WO3/MgO/GO@CS scaffold's antibacterial activity. Additionally, human lung cells were used to determine the average cell viability of nanocomposite scaffolds and reached 121 % of WO3 /MgO/GO@CS nanocomposite, and the IC50 value was found to be 1654 μg/mL. The ability of the scaffold to inhibit the bacteria has been tested against both E. coli and S. aureus. The 4th sample showed an inhibition zone of 11.5±0.5 mm and 13.5±0.5 mm, respectively. These findings demonstrate the enormous potential for WO3 /MgO/GO@CS membrane as wound dressings in the clinical management of bacterially infected wounds.

Influence of the Extraction Solution on the Removal of Heavy Metals from Polluted Soils

Soil pollution with heavy metals is a problem for the whole geosystem. The aim of the research is to identify new solutions for extracting heavy metals from polluted soils so that they can be further exploited. To this end, investigations of the physicochemical characteristics of the soil sample under study were carried out. Following the analyses, the soil was characterised as lute-coarse sand (UG) with a strongly acidic pH (4.67), a hygroscopicity coefficient (CH = 4.8% g/g), and a good supply of nutrients: nitrogen (Nt): 0.107%; mobile phosphorus (PAL): 6 mg kg-1 and mobile potassium (KAL): 26 mg kg-1, but is low in humus (2.12%). The metal content of the soil was determined by atomic absorption spectrometry (AAS), and the analyses showed high concentrations of metals (Pb: 27,660 mg kg-1; Cu: 5590 mg kg-1; Zn: 2199 mg kg-1; Cd: 11.68 mg kg-1; Cr: 146 mg kg-1). The removal of metals (Pb, Cu, Zn, Cd, and Cr) from polluted soil by different extraction agents (water, humus, malic acid, chitosan, and gluconic acid) was investigated. Metal extraction experiments were carried out in a continuous orbital rotation-oscillation stirrer at a solid/liquid/ (S/L ratio; g:mL) of 1:4, at two concentrations of extraction solution (1% and 3%), and at different stirring times (2, 4, 6, and 8 h). The yield of the extraction process is very low for all proposed extraction solutions. The maximum values of extraction efficiency are: 0.5% (Pb); 3.28% (Zn); and 5.72% (Cu). Higher values were obtained in the case of Cr (11.97%) in the variant of using humus 3% as an extraction solution at a stirring time of 6 h. In the investigated experimental conditions, the best removal efficiencies were obtained in the case of cadmium (26.71%) when using a 3% malic acid solution. In conclusion, it is considered that, from case to case, the type of extraction solution as well as the nature of the metal influence the mechanism of the depollution process, i.e., the capacity of the fine soil granules to free themselves from the pollutant metal that has adhered to them, and further research is considered necessary in the future.

Improving the ability of straw biochar to remediate Cd contaminated soil: KOH enhanced the modification of K3PO4 and urea on biochar

In recent years, the improvement of soil cadmium (Cd) contamination remediation effect of biochar by modification has received wide attention. However, the effect of combined modification on biochar performance in soil Cd contamination remediation and the mechanism are still unclear. In this study, cotton straw biochar and maize straw biochar were co-modified by KOH (0, 3, 5 mol L-1), K3PO4, and urea. Then, two modified biochars with high Cd adsorption capacity were selected to test the soil Cd contamination remediation effect through a pot experiment. The results showed that the combined modification by using KOH, K3PO4, and urea significantly increased the specific surface area and nitrogen (N) and phosphorus (P) contents of biochar, providing more adsorption sites for Cd. Among the modified biochar, the cotton straw biochar modified with KOH (3 mol L-1), K3PO4, and urea (m3-CSB) had the highest adsorption capacity (111.25 mg g-1), which was 7.86 times that of cotton straw biochar (CSB). The m3-CSB for adsorption isotherm and kinetics of Cd conformed to the Langmuir model and Pseudo-second-order kinetic equation, respectively. In the pot experiment, under different exogenous Cd levels (0 (Cd0), 4 (Cd4), and 8 (Cd8) mg kg-1), m3-CSB treatment decreased soil available Cd content the most (51.68%-63.4%) compared with other biochar treatments. Besides, m3-CSB treatment significantly promoted the transformation of acid-soluble Cd to reducible, oxidizable, and residual Cd, reducing the bioavailability of Cd. At the Cd4 level, the application of m3-CSB significantly reduced cotton Cd uptake compared to CK, and the maximum reduction of Cd content in cotton fibers was as high as 81.95%. Therefore, cotton straw biochar modified with KOH (3 mol L-1), K3PO4, and urea has great potential in the remediation of soil Cd contamination.

Biochar-supported magnesium oxide as high-efficient lead adsorbent with economical use of magnesium precursor

With unique porous structure inherited from lignocellulose, biochar was an appropriate carrier for small-size MgO materials, which could simplify the synthetic process and better solve agglomeration and separation problems during adsorption. Biochar-supported MgO was prepared with impregnation method. Under different synthesis conditions, the obtained MgO presented diverse properties, and moderate pyrolysis condition was conducive to the improvement of Mg conversion rate. The Pb(II) capacity was highly correlated with Mg content, rather than the specific surface area. Reducing the pyrolysis temperature or increasing the usage of supporter could improve adsorption efficiency when using Mg content-normalized capacity as the criterion. The better release ability of Mg, contribute by the higher extent of hydration and better spread of MgO, were the critical factors. The maximal Mg content-normalized capacity could reach 0.932 mmol·mmol-Mg^-1 with the mass ratio of biochar/MgCl₂·6H₂O = 4:1 at the pyrolysis temperature of 600 °C. Considering the ultimate utilization efficiency of Mg in precursor, the optimum Mg consumption-normalized capacity was 0.744 mmol·mmol-Mg^-1 with the mass ratio of biochar/MgCl₂·6H₂O = 1:1 at 600 °C.

Effect of biochar derived from co-pyrolysis of sewage sludge and rice straw on cadmium immobilization in paddy soil

The remediation of cadmium (Cd) contaminated cropland has been related to food safety and public health. While biochar derived from sewage sludge (SS) has been widely used for soil remediation due to its high efficiency of Cd immobilization, it has a low specific surface area and the ecological risk of heavy metals. Co-pyrolysis of straws and SS could resolve these issues. To date, little is known about the effect of biochar from SS/rice straw (RS) on Cd immobilization in soils. Here, we explored the soil remediation efficiency and mechanism of biochar derived from different mixing ratios (1:0, 3:1, 2:1, 1:1, 1:2, 1:3 and 0:1) of RS and SS named as RBC, R3S1, R2S1, R1S1, R1S2, R1S3 and SBC. It was shown that R1S2 amendment had the most efficiency of Cd immobilization among all amendments, which decreased the bioavailable Cd by 85.61% and 66.89% compared with RBC and SBC amendments. Results of biochar after soil remediation revealed that cation-π interaction, complexation, ion exchange and precipitation were the key mechanisms of Cd immobilization by biochar. All biochar amendments indirectly promoted Cd immobilization through increasing soil pH values, cation exchange capacity (CEC), soil organic carbon (SOC) and available phosphorous (AP). Compared with RBC, R1S2 reduced bioavailable Cd mainly through the increased soil pH, CEC and AP. However, the enhanced efficiency of Cd immobilization in R1S2 amendment than that in SBC amendment because of the more developed pore structure, functional groups and larger specific surface area of R1S2. Overall, our study showed a new type of biochar for the effective remediation of Cd-contaminated soil.

Nano-chlorapatite modification enhancing cadmium(II) adsorption capacity of crop residue biochars

Cadmium (Cd) contamination in rivers or lakes has attracted worldwide concerns. Biochar pyrolyzed form crop residues (CR) could adsorb Cd(II) from aquatic environments, while the removal capacity of single CR biochar is relatively low. Nano-chlorapatite (nClAP) modification can enhance metal scavenging ability, but little is known about the behaviors and mechanisms of Cd(II) adsorption by nClAP-modified CR biochars. In this study, the influences of feedstock type, pyrolysis temperature, nClAP modification and aquatic environments on Cd(II) adsorption of biochars derived from rice (RB) and wheat (WB) husks were investigated comprehensively. Results showed that the pristine RB and WB showed low and similar Cd(II) adsorption capacities, while the rise of pyrolysis temperatures from 300 to 600 °C significantly improved the adsorption capacities. The Cd(II) adsorption of both RB and WB was regarded as monolayer chemical processes controlled by chemical precipitation, surface complexation and cation exchange mechanisms. Moreover, the nClAP modification notably enhanced Cd(II) adsorption capacities from 13.2 to 39.9 mg·g^-1 of pristine biochars to 25.2-60.7 mg·g^-1 of modified biochars attributed to the improved contribution of Cd(II)-phosphate precipitation. Among all biochars, the nClAP-modified RB and WB pyrolyzed at 500 °C had the highest Cd(II) adsorption capacities with 60.7 and 48.3 mg·g^-1, respectively. These biochars could maintain good adsorption performances under the neutral-alkaline (pH 6-8), low ionic strength, high dissolved organic matter and all oxidation-reduction potential conditions. In conclusion, this study reveals the importance of nClAP modification to optimize Cd(II) adsorption of CR biochars, which provides a promising future for its practical application in aquatic Cd(II) scavenging.

Responses of aquatic vegetables to biochar amended soil and water environments: a critical review

Aquatic vegetables, including lotus root, water spinach, cress, watercress and so on, have been cultivated as commercial crops for a long time. Though aquatic vegetables have great edible and medicinal values, the increasing demands for aquatic vegetables with high quality have led to higher requirements of their soil and water environments. Unfortunately, the soil and water environment often face many problems such as nutrient imbalance, excessive fertilization, and pollution. Therefore, a new cost-effective and eco-friendly solution for addressing the above issues is urgently required. Biochars, one type of pyrolysis product obtained from agricultural and forestry waste, show great potential in reducing fertilizer application, upgrading soil quality and remediating pollution. Application of biochars in aquatic vegetable cultivation would not only improve the yield and quality, but also reduce its edible risk. Biochars can improve the soil micro-environment, soil microorganism and soil enzyme activities. Furthermore, biochars can remediate the heavy metal pollution, organic pollution and nitrogen and phosphorus non-point source pollution in the water and soil environments of aquatic vegetables, which promotes the state of cultivation conditions and thereby improves the yield and quality of aquatic vegetables. However, the harmful substances such as heavy metals, PAHs, etc. derived from biochars can cause environmental risks, which should be seriously considered. In this review, the application of biochars in aquatic vegetable cultivation is briefly summarized. The changes of soil physicochemical and biological properties, the effects of biochars in remediating water and soil environmental pollution and the impacts of biochars on the yield and quality of aquatic vegetables are also discussed. This review will provide a comprehensive overview of the research progress on the effects of biochars on soil and water environments for aquatic vegetable cultivation.

Humic acid coupled with coal gasification slag for enhancing the remediation of Cd-contaminated soil under alternated light/dark cycle

In this study, the synthesis of a coal gasification slag-humic acid (SA) hybrid was purposed for the remediation of cadmium (Cd)-contaminated soil. In order to investigate the effect of SA on the Cd-contaminated soil and plant growth, a series of experiments were carried out under different illumination condition. The results showed that the SA has some the photocatalytic activity, and adding 10 wt% of SA to the soil could obviously improve the soil fertility and decrease the mobility of Cd in the soil under alternated light/dark cycle (12L/12D); the content of the residual fraction in the SA-amended soil reached 69.5%, and the Cd decreasing rates for the leaf, stem, and root of Artemisia ordosica were near 100%, 91.3%, and 75.3%, respectively. Characterizations of amendments suggested that the synergistic effect of precipitation and surface complexation played a major role in the remediation of Cd-contaminated soil.

Manganese stabilization in mine tailings by MgO-loaded rice husk biochar: Performance and mechanisms

Leachable metal in abandoned mine tailings may be toxic to vegetation, affecting effective ecological restoration. In this study, MRB was synthesized through MgCl₂·6H₂O wet impregnation followed by duplicate slow pyrolysis. Manganese tailings were mixed with MRB, rice husk biochar (RB), and MgO at a dosage of 0-5%, followed by 90-day incubation. Toxicity characteristic leaching procedure and sequential leaching were used to analyze the leachability and species of Mn in tailings, while a stabilization mechanism was proposed with the support of the characterization of the tailings before and after amendment. Results suggested MRB addition significantly decreased leachable Mn by 63.8%, reducing from 59.88 mg/L to 21.68 mg/L, while only a 14.39% reduction was achieved by rice husk biochar (RB). The sharp decline of leachable Mn after 90-day mixing was contributed by the transformation from labile to stable fractions. A microporous biochar matrix along with the uniform dispersion of MgO active component were both responsible for the better Mn stabilization. Only less than 10% of the variation in substrate pH was observed with the increase of MgO loading or incubation time. Linear correlation analyses indicated substrate pH's strongl negative relationship with leachable Mn and moderately positive relationship with residual fraction. Characterization results revealed that MRB exhibited different stabilization mechanisms in mine tailings, where Mn was likely to be stabilized by direct interaction with active MgO or indirect alkaline precipitation to form stable MgMn₂O₄, Mn(CH₃COO)_2, and MnO(OH)₂. This work validated the promoting potential of recycling agricultural biomass waste for the amendment of manganese mine tailings.

Development of chitosan-magnetic sawdust hydrochar for Pb and Zn immobilization process on various soil conditions

A series of 60-day soil immobilized incubations were performed to explore the impacts of various factors (incubation time, chitosan modified magnetic sawdust hydrochar (CMSH) dosages, initial pH values, moisture contents, and humic acid (HA)) on CMSH immobilization of Pb and Zn. DTPA and BCR extraction techniques were undertaken to study the distribution of form transformations of Pb and Zn. CMSH showed significant immobilization ability for both DTPA-Pb and DTPA-Zn, and the highest removal rates were shown to be 57.40% and 90.00% for Pb and Zn respectively. After 60 days of incubation, the residual Pb was enhanced by 34-61% and residual Zn increased by 25-41%, which indicated that CMSH was effective in immobilizing Pb and Zn. Meanwhile, the immobilization efficiency improved with increasing incubation time, CMSH dosage, HA dosage, and initial solution pH. In particular, 5% HA application increased the soil TOC and accelerated the metal stabilization processes, with the residual forms of Pb and Zn eventually reaching a maximum of 73% and 71%, respectively. In addition, the alkaline initial solution promoted the ion exchange, surface complexation reaction, and cationic-π interaction, resulting in a better immobilization of Pb and Zn by CMSH. Finally, according to the orthogonal analysis of BCR results, HA dosage was the major factor affecting Pb and Zn immobilization by CMSH compared to soil pH and moisture content in this study.

Adsorption characteristics and mechanisms of Cd2+ from aqueous solution by biochar derived from corn stover

Corn stover could be pyrolysed to prepare biochar for removing pollutants in water and realizing the resource utilization of biomass. The aims of the present study were to investigate the optimal preparation and adsorption conditions of biochar and to reveal the adsorption characteristics and mechanisms of Cd²⁺ in water by biochar. For this purpose, with Cd²⁺ as the target pollutant, the pyrolysis conditions involved in the pyrolysis temperature, retention time, and heating rate were evaluated and optimized. Additionally, the characteristics, mechanisms and optimal adsorption conditions of Cd²⁺ by biochar were determined. A series of characterization techniques was employed, including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and specific surface area analysis (S_BET). The optimum pyrolysis parameters were a pyrolysis temperature of 700 °C, a retention time of 2.5 h, and a heating rate of 5 °C/min. Acid/base modification did not improve the adsorption capacity of biochar. The Langmuir and the Elovich model were the most suitable isotherm and kinetic models for equilibrium data, respectively. The maximum adsorption capacity fitted by Langmuir model was 13.4 mg/g. Furthermore, mineral precipitation and π electron interactions were shown to be the main adsorption mechanisms of Cd²⁺. The optimum adsorption conditions for Cd²⁺ in water were a CaCl₂ electrolyte solution of 0.01 mol/L, a pH level of 6.7, and a biochar dosage of 0.4 g. Our results indicated that corn stover biochar was an appropriate approach for improving the status of water with Cd²⁺ contamination in the short term and for promoting a new perspective for the rational utilization of corn stover and the low-cost pollution control of heavy metals in water.

Resource utilization of rice husk biomass: Preparation of MgO flake-modified biochar for simultaneous removal of heavy metals from aqueous solution and polluted soil

In general, the remediation performance of heavy metals can be further improved by metal-oxide modified biochar. This work used MgO-modified rice husk biochar (MgO-5%@RHB-450 and MgO-5%@RHB-600) with high surface activity for simultaneous remediation and removal of heavy metals in soil and wastewater. The adsorption of MgO-5%@RHB-450/MgO-5%@RHB-600 for Cd(II), Cu(II), Zn(II) and Cr(VI) followed the pseudo-second order, with the adsorption capacities reaching 91.13/104.68, 166.68/173.22, 80.12/104.38 and 38.88/47.02 mg g^-1, respectively. The addition of 1.0% MgO-5%@RHB-450 and MgO-5%@RHB-600 could effectively decrease the CaCl₂-extractable Cd concentration (CaCl₂-Cd) by 66.2% and 70.0%, respectively. Moreover, MgO-5%@RHB-450 and MgO-5%@RHB-600 facilitated the transformation of exchangeable fractions to carbonate-bound and residual fractions, and reduced the exchangeable fractions by 8.1% and 9.6%, respectively. The mechanisms for the removal of heavy metals from wastewater by MgO-5%@RHB-450 and MgO-5%@RHB-600 mainly included complexation, ion exchange and precipitation, and the immobilization mechanisms in soil may be precipitation, complexation and pore filling. In general, this study provides high-efficiency functional materials for the remediation of heavy metal pollution.

Chitosan-Modified Biochars to Advance Research on Heavy Metal Ion Removal: Roles, Mechanism and Perspectives

The chitosan-modified biochars BC-CS 1-1, BC-CS 2-1 and BC-CS 4-1 were subjected to the synthetic application of biochar from agriculture waste and chitosan for the adsorption of Cu(II), Cd(II), Zn(II), Co(II) and Pb(II) ions from aqueous media. The results displayed a heterogeneous, well-developed surface. Additionally, the surface functional groups carboxyl, hydroxyl and phenol, determining the sorption mechanism and confirming the thermal stability of the materials, were present. The sorption evaluation was carried out as a function of the sorbent dose, pH, phase contact time, initial concentration of the solution and temperature. The maximum value of q_t for Pb(II)-BC-CS 4-1, 32.23 mg/g (C₀ 200 mg/L, mass 0.1 g, pH 5, 360 min), was identified. Nitric acid was applied for the sorbent regeneration with a yield of 99.13% for Pb(II)-BC-CS 2-1. The produced sorbents can be used for the decontamination of water by means of the cost-effective and high-performance method.

Preparation, adsorption performance and mechanism of MgO-loaded biochar in wastewater treatment: A review

Biochar is a low cost, porous and solid material with an extremely high carbon content, various types of functional groups, a large specific surface area and many other desirable characteristics. Thus, it is often used as an adsorbent or a loading matrix. Nano-magnesium oxide is a crystalline material with small particles and strong ion exchangeability. However, due to the high surface chemical energy, it easily forms agglomerates of particles. Therefore, to combine the advantages of biochar and magnesium, metal magnesium nanoparticles can be loaded onto the surface of biochar with different modification techniques, resulting in biochars with low cost and high adsorption performance to be used as an adsorption matrix (collectively referred to as Mg@BC). This review presents the effects of different Mg@BC preparation methods and synthesis conditions and summarizes the removal capabilities and adsorption mechanisms of Mg@BC for different types of pollutants in water. In addition, the review proposes the prospects for the development of Mg@BC to solve various problems in the future.

Chitosan-Modified Biochar and Unmodified Biochar for Methyl Orange: Adsorption Characteristics and Mechanism Exploration

In this study, shrimp shell-derived chitosan (CS) and rice husk-derived biochar (RHB) were produced; CS and RHB were then used to synthesize chitosan-modified biochar (CSBC) hydrogel beads. N₂ adsorption (77K), SEM-EDX and FT-IR techniques were used to evaluate the physicochemical properties of the adsorbents. A batch experiment was conducted to test the methyl orange (MO) adsorption performance of RHB and CSBC. The results showed that the MO adsorption process was strongly pH-dependent. The kinetics were well described by the pseudo-second-order and intra-particle diffusion models, assuming the chemisorption and intraparticle diffusion mechanisms govern the adsorption process. Homogeneous adsorption for MO on the surface of RHB and CSBC was also assumed since the isotherm data showed the best-fit to the Langmuir model. Under the experimental conditions of initial pH 3, dosage 0.2 g, contact time 240 min and temperature 298 K, the maximum adsorption capacity of CSBC and RHB for MO dye adsorption was 38.75 mg.g^-1 and 31.63 mg.g^-1, respectively. This result demonstrated that biochar had better performance after modification with chitosan, which provided more functional groups (i.e., -NH₂ and -OH groups) for enhanced electrostatic interactions and complexation between MO and CSBC. Overall, CSBC is an effective adsorbent for the removal of MO from aqueous solution.

Natural Polymers and Their Nanocomposites Used for Environmental Applications

The aim of this review is to bring together the main natural polymer applications for environmental remediation, as a class of nexus materials with advanced properties that offer the opportunity of integration in single or simultaneous decontamination processes. By identifying the main natural polymers derived from agro-industrial sources or monomers converted by biotechnology into sustainable polymers, the paper offers the main performances identified in the literature for: (i) the treatment of water contaminated with heavy metals and emerging pollutants such as dyes and organics, (ii) the decontamination and remediation of soils, and (iii) the reduction in the number of suspended solids of a particulate matter (PM) type in the atmosphere. Because nanotechnology offers new horizons in materials science, nanocomposite tunable polymers are also studied and presented as promising materials in the context of developing sustainable and integrated products in society to ensure quality of life. As a class of future smart materials, the natural polymers and their nanocomposites are obtained from renewable resources, which are inexpensive materials with high surface area, porosity, and high adsorption properties due to their various functional groups. The information gathered in this review paper is based on the publications in the field from the last two decades. The future perspectives of these fascinating materials should take into account the scale-up, the toxicity of nanoparticles, and the competition with food production, as well as the environmental regulations.

Simultaneous immobilization of arsenic, lead and cadmium by magnesium-aluminum modified biochar in mining soil

Owing to the human activities such as smelting and mining, arsenic (As), lead (Pb) and cadmium (Cd) seriously polluted the soil of non-ferrous metal mining areas, thus efficient methods for the simultaneous immobilization of the three heavy metals are urgently needed. In the present study, Mg-Al modified biochars (MABs) were synthesized through a simple one-pot pyrolysis method to immobilize the three heavy metals. According to the BET (Brunauer-Emmett-Teller) test method, MABs had larger specific surface areas than biochar. Compared to the materials obtained at 300 °C and 700 °C, MAB with a pyrolysis temperature of 500 °C (MAB 500) had a significant immobilization effect on As, Pb and Cd in the Gansu mining area. Compared with BC, the removal efficiencies of As, Pb and Cd increased from -62%, 17% and 5% to 52%, 100% and 66%, respectively. And the toxicity characteristic leaching procedure (TCLP) test showed that the leaching concentrations of the three heavy metals in the treated soil were all lower than the standard value. X-ray photoelectron spectroscopy and kinetic experiments showed that there were various mechanisms in the immobilization process of the three heavy metals, and the large specific surface area and the multi-Mg/Al-OH of MABs play an important role in this process. More charges were provided by larger specific surface for ion exchange with heavy metals. In addition, larger specific surface area also provided more adsorption sites. More complex sites were provided by Mg/Al-OH to form Mg/Al-O-M then immobilize the heavy metals. In summary, the immobilization mechanism may involve electrostatic attraction, precipitation/co-precipitation, and surface complexation.

Chitosan-modified biochar: Preparation, modifications, mechanisms and applications

The chitosan-modified biochar composite, as a carbohydrate polymer, has received increasing attention and becomes a research hotspot. It is a promising impurity adsorption material, which has potential application value in the agricultural environment fields such as soil improvement and sewage purification. The composite can combine the advantages of biochar with chitosan, and the resulting composite usually exhibits a great improvement in its surface functional groups, adsorption sites, stability, and adsorption properties. In addition, compared to other adsorbents, the composite truly achieves the concept of "waste control by waste". In this paper, the preparation method, composite classification, adsorption mechanism, and models of biochar modified by chitosan are introduced, meanwhile, we also review and summarize their effects on the decontamination of wastewater and soil. In addition to common heavy metal ions, we also review the adsorption and removal of some other organic/inorganic pollutants, including (1) drug residues; (2) dyes; (3) phosphates; (4) radionuclides; (5) perfluorochemicals, etc. Moreover, challenges and prospects for the composite are presented and further studies are called for the chitosan-biochar composite. We believe that the composite will lead to further achievements in the field of environmental remediation.

Effects of Silicic Acid on Leaching Behavior of Arsenic from Spent Magnesium-Based Adsorbents Containing Arsenite

The spent adsorbents left after treating arsenic-contaminated water contain large amounts of arsenic. These spent adsorbents may come into contact with silicic acid leached from soil or cementitious solidification materials in the disposal environment. Thus, it is important to evaluate the effects of silicic acid on spent adsorbents containing arsenic. In this study, the effects of silicic acid on spent Mg-based adsorbents (magnesium oxide (MgO) and magnesium hydroxide (Mg(OH)2)) containing arsenite were investigated. The arsenic leaching ratios of both spent adsorbents decreased slightly with an increase in the initial silicic acid concentration of the eluent. The arsenic leaching ratio decreased from 1.24% to 0.69% for MgO and from 5.97% to 4.71% for Mg(OH)2 at an initial Si-normalized concentration of 100 mg/L. The primary mechanism behind the inhibition of arsenic leaching by silicic acid was determined to be the difficulty of arsenic desorption due to the coating effect following the adsorption of silicic acid species. The results indicate that the arsenic leaching related to the ion exchange reaction with silicic acid hardly occurred for the spent Mg-based adsorbents. Compared with various spent Mg-based and Ca-based adsorbents, the spent MgO adsorbent exhibited the highest environmental stability and best performance.

KHCO3 activated biochar supporting MgO for Pb(II) and Cd(II) adsorption from water: Experimental study and DFT calculation analysis

A new strategy that simultaneous use of KHCO₃ activated biochar and nano-MgO incorporation for Pb²⁺ and Cd²⁺ removal from water was raised. After activating by KHCO₃, the BC showed a higher surface area and could carry more MgO nanoparticles the BC owned. The synthesized MgO-K-BC had a large adsorption capacity for Pb²⁺ (1625.5 mg/g) and Cd²⁺ (480.8 mg/g). Multiple characterization and comparative test have been performed to demonstrate that ion-exchange, precipitation, and complexation are the main mechanisms for Pb²⁺ and Cd²⁺ removal by MgO-K-BC. In order to further explore the adsorption mechanism in-depth, the density functional theory (DFT) calculation combined with experimental results were performed. The O-top of MgO was the most stable adsorption site for Pb²⁺/Cd²⁺ adsorption compared with other adsorption sites (Mg-top, bridge, and hollow). In addition, the results of charge density maps and projected density of state (PDOS) showed that the overlap of electron cloud and orbits between MgO and Pb²⁺ were denser than Cd²⁺, indicating that MgO-K-BC had a stronger affinity for Pb²⁺ than Cd²⁺, so that, MgO-K-BC had a higher adsorption capacity for Pb²⁺ than Cd²⁺. This work provides a deep understand of the mechanism for heavy metals adsorption by metal oxide and a practical and theoretical guidance for adsorbent preparation with high adsorption ability for heavy metal.

Efficient removal of Cd (II) from aqueous solution by chitosan modified kiwi branch biochar

Production of cost-efficient composite materials from low-cost modified biochar for the removal of Cd (II) from wastewater is much needed to meet the growing needs of industrial wastewater treatments. A novel chitosan-modified kiwi branch biochar (CHKB) was fabricated as low-cost modified biochar for the removal of Cd (II) from aqueous solution. Batch adsorption and characterization experiments indicated that the modification of kiwi biochar (KB) by chitosan remarkably improved its adsorption performance. The results revealed that the adsorption isotherms can be best described by a Langmuir model and that a pseudo-second-order model fits the Cd (II) adsorption kinetics well, which indicates that it is a monolayer process controlled by chemisorption. CHKB exhibited a Langmuir maximum adsorption capacity of Cd (II) (126.58 mg g^-1), whereas that of KB was only 4.26 mg g^-1. The adsorption ability of CHKB was improved by increasing the surface area and an abundance of surface functional groups (-OH, -NH, CO, etc.). The cation exchange, electrostatic interaction, surface complexation, and precipitation were the main mechanisms in the sorption of Cd (II) on CHKB. Excellent adsorption performance, low cost, and environmental-friendliness made CHKB a fantastic adsorbent for the removal of Cd (II) in wastewater.

Adsorption Performance of Cd(II) by Chitosan-Fe3O4-Modified Fish Bone Char

In order to develop a low-cost, fast, and efficient adsorbent, the fish bone charcoal B₆₀₀ prepared at 600 °C was modified by chitosan (Cs) and Fe₃O₄ to produce the material Cs-Fe₃O₄-B₆₀₀. Results showed that Cs-Fe₃O₄-B₆₀₀ had magnetic responsiveness and can achieve solid–liquid separation, macropores disappeared, pore volume and specific surface area are increased, and amino functional groups appear on the surface. The adsorption process of Cd(II) by Cs-Fe₃O₄-B₆₀₀ conformed best to the pseudo-second order kinetics model and the Langmuir model, respectively. The behavior over a whole range of adsorption was consistent with chemical adsorption being the rate-controlling step, which is a very fast adsorption process, and the isothermal adsorption is mainly monolayer adsorption, which belongs to favorable adsorption. In addition, the saturated adsorption capacity obtained for the Cs-Fe₃O₄-B₆₀₀ to Cd(II) was 64.31 mg·g⁻¹, which was 1.7 times than B₆₀₀. The structure and morphology of Cs-Fe₃O₄-B₆₀₀ were characterized through SEM-EDS, TEM, FTIR, and XRD, indicating that the main mechanism of Cs-Fe₃O₄-B₆₀₀ and Cd(II) is mainly the complexation of amino groups, and it also includes part of the ion exchange between Cd(II) and Fe₃O₄. Therefore, Cs-Fe₃O₄-B₆₀₀ can be employed as an effective agent for remediation of Cd contaminated water.

Adsorption Characteristics of Chitosan-Modified Bamboo Biochar in Cd(II) Contaminated Water

The purpose of this study was to fabricate a low-cost and eco-friendly adsorbent using bamboo biochar (BB), a kind of charcoal composed of high Brunauer–Emmett–Teller surface area and variety of functional groups, and chitosan as substrates for remediation of Cd(II) in Cd(II) contaminated water and characterized the functional group characteristics, surface morphology, and Cd(II) adsorption effect using the Fourier transform infrared (FT-IR), scanning electron microscope (SEM), and energy-dispersive X-ray spectrometer (EDS). Results showed that chitosan-modified bamboo biochar (CBB) provided more active adsorption sites (such as –NH2, –COOH, –OH, and C=O) on the surface to enhance the Cd(II) removal efficiency in Cd(II) contaminated wastewater. Meanwhile, the optimal pH, contact time, and dose of CBB on the Cd(II) removal efficiency are 7, 120 min, and 600 mg, respectively. In addition, the adsorption isotherm results revealed that the possible adsorption mechanisms might include surface adsorption, electrostatic adsorption, and ion exchanges. Furthermore, the maximum adsorption capacity (Qm) values predicted from the Langmuir model were 37.74 and 93.46 mg/g for BB and CBB, respectively, also indicating a potential application of CBB in practical wastewater. Desorption and regeneration of CBB were attained simultaneously and the results showed that even after five cycles of adsorption-elution, the adsorption and desorption of CBB exhibited a slight decline and still reached at 71.70% and 65.92%. Results from this study would provide a reference to functionalized CBB for Cd(II) adsorption in contaminated water.

Biosorbent derived from coffee husk for efficient removal of toxic heavy metals from wastewater

In this study, we investigated the feasibility on the utilization of coffee husk as biosorbents for the removal of heavy metal ions such as Pb²⁺ and Cd²⁺ from wastewater. Biochar was produced from coffee wastes and modified with sodium hydroxide to create functional groups on the surface and increase the specificic surface area. The resultant products were characterized by using various analytical methods such as scanning electron microscopy, specific area, surface functional group and zeta potential analysis. The as-prepared materials were employed as adsorbent to remove Pb²⁺ and Cd²⁺ ions from wastewater. The maximum sorption capacities of biosorbents were measured to be 116.3 and 139.5 mg g^-1 for Cd²⁺ and Pb²⁺, respectively, which is comparable to the conventional adsorbents. Kinetic studies showed that the sorption of Pb²⁺ and Cd²⁺ on biosorbents can be described by the Freundlich isotherm and second-order kinetic model. The coffee husk-derived biosorbent was capable of removing 89.6% of Pb²⁺ and 81.5% Cd²⁺ ions from wastewater, and therefore can be considered as low-cost and efficient adsorbent to remove heavy metal ions from wastewater.