Development of reduced graphene oxide-supported novel hybrid nanomaterials (Bi2WO6@rGO and Cu-WO4@rGO) for green and efficient oxidative desulfurization of model fuel oil for environmental depollution

Magnetic recyclable visible light-driven Bi2WO6/Fe3O4/RGO for photocatalytic degradation of Microcystin-LR: Mechanism, pathway, and influencing factors

Photocatalysis was an attractive strategy that had potential to tackle the Microcystin-LR (MC-LR) contamination of aquatic ecosystems. Herein, magnetic photocatalyst Fe3O4/Bi2WO6/Reduced graphene oxide composites (Bi2WO6/Fe3O4/RGO) were employed to degrade MC-LR. The removal efficiency and kinetic constant of the optimized Bi2WO6/Fe3O4/RGO (Bi2WO6/Fe3O4-40%/RGO) was 1.8 and 2.3 times stronger than the pure Bi2WO6. The improved activity of Bi2WO6/Fe3O4-40%/RGO was corresponded to the expanded visible light adsorption ability and reduction of photogenerated carrier recombination efficiency through the integration of Bi2WO6 and Fe3O4-40%/RGO. The MC-LR removal efficiency exhibited a positive tendency to the initial density of algae cells, fulvic acid, and the concentration of MC-LR decreased. The existed anions (Cl-, CO3-2, NO3-, H2PO4-) reduced MC-LR removal efficiency of Bi2WO6/Fe3O4-40%/RGO. The Bi2WO6/Fe3O4-40%/RGO could degrade 79.3% of MC-LR at pH = 7 after 180 min reaction process. The trapping experiments and ESR tests confirmed that the h+, ∙OH, and ∙O2- played a significant role in MC-LR degradation. The LC-MS/MS result revealed the intermediates and possible degradation pathways.

Bismuth Tungstate Nanoplates-Vis Responsive Photocatalyst for Water Oxidation

The development of visible-light-responsive (VLR) semiconductor materials for effective water oxidation is significant for a sustainable and better future. Among various candidates, bismuth tungstate (Bi2WO6; BWO) has attracted extensive attention because of many advantages, including efficient light-absorption ability, appropriate redox properties (for O2 generation), adjustable morphology, low cost, and profitable chemical and optical characteristics. Accordingly, a facile solvothermal method has been proposed in this study to synthesize two-dimensional (2D) BWO nanoplates after considering the optimal preparation conditions (solvothermal reaction time: 10-40 h). To find the key factors of photocatalytic performance, various methods and techniques were used for samples' characterization, including XRD, FE-SEM, STEM, TEM, HRTEM, BET-specific surface area measurements, UV/vis DRS, and PL spectroscopy, and photocatalytic activity was examined for water oxidation under UV and/or visible-light (vis) irradiation. Famous commercial photocatalyst-P25 was used as a reference sample. It was found that BWO crystals grew anisotropically along the {001} basal plane to form nanoplates, and all properties were controlled simultaneously by tuning the synthesis time. Interestingly, the most active sample (under both UV and vis), prepared during the 30 h solvothermal reaction at 433 K (BWO-30), was characterized by the smallest specific surface area and the largest crystals. Accordingly, it is proposed that improved crystallinity (which hindered charge carriers' recombination, as confirmed by PL), efficient photoabsorption (using the smallest bandgap), and 2D mesoporous structure are responsible for the best photocatalytic performance of the BWO-30 sample. This report shows for the first time that 2D mesoporous BWO nanoplates might be successfully prepared through a facile template-free solvothermal approach. All the above-mentioned advantages suggest that nanostructured BWO is a prospective candidate for photocatalytic applications under natural solar irradiation.

Immunodysregulatory potentials of polyethylene or polytetrafluorethylene microplastics to mice subacutely exposed via intragastric intubation

Microplastics (MPs) have been recently recognized as posing a risk to human health. The adverse health effects of MP exposure have been recently reported, especially via the oral exposure route. The present study investigated whether subacute (4 week) exposure to polyethylene (PE) or polytetrafluorethylene (PTFE) MPs via gastric intubation caused immunotoxicity. Two different sizes of PE MPs (6.2 or 27.2 μm) and PTFE MPs (6.0 or 30.5 μm) were administered to 6-week-old mice of both sexes at 0 (corn oil vehicle control), 500, 1000, or 2000 mg/kg/day (n = 4/group). No significant differences were observed between groups in the major thymic or splenic immune cell populations, including thymic CD4+, CD8+, CD4+/CD8+ T lymphocytes, and splenic helper T cells, cytotoxic T cells, and B cells. The ratio of interferon-gamma (IFNγ) to interleukin-4 (IL-4) in culture supernatants from polyclonally activated splenic mononuclear cells ex vivo (48 h) was dose-dependently decreased in female mice that received small- and large-size PTFE MPs. The IFNγ/IL-4 ratio was also decreased in the female mice dosed with large-size PE MPs. The serum IgG2a/IgG1 ratio was dose-dependently increased in male and female animals dosed with small-size PE MPs, in female animals dosed with large-size PTFE MPs, and in male animals dosed with small-size PTFE MPs. The present study implies that immune functions could be affected in animals exposed to MPs via gastric intubation. These effects are dependent on MP size, MP dose, MP polymer type, and mouse sex. Further investigations with longer exposure periods could be necessary to more clearly define the immunotoxic effects of MPs.

Supplementary Information

The online version contains supplementary material available at 10.1007/s43188-023-00172-6.

Visible light-driven photocatalytic degradation of Microcystin-LR by Bi2WO6/Reduced graphene oxide heterojunctions: Mechanistic insight, DFT calculation and degradation pathways

Developing heterostructure photocatalysts for removing Microcystin-LR (MC-LR) under visible light was of positive significance to control the risk of Microcystins and ensure the safety of water quality. Herein, the Bi₂WO₆/Reduced graphene oxide (RGO) nanocomposites were prepared via a simple one-spot hydrothermal method for the first time to degrade MC-LR. The optimized Bi₂WO₆/RGO (Bi₂WO₆/RGO_3%) achieved a removal efficiency of 82.3% toward MC-LR, with 1.9-fold higher efficiencies than Bi₂WO₆, and it showed superior reusability and high stability after 5 cycles. The degradation efficiency of MC-LR demonstrated a negative trend with the initial concentration of MC-LR, fulvic acid, and initial algal density increased, while MC-LR removal rate for the presence of anions was in the order of Cl^- > CO₃^-2 > NO₃^- > H₂PO₄^-. The degradation efficiency of MC-LR could reach up to 82.3% within 180 min in the neutral condition. The active species detection experiments and EPR measurements demonstrated that the holes (h⁺), hydroxide radicals (∙OH), and superoxide radicals (∙O₂^-) participated in the degradation of MC-LR. The DFT calculations showed that 0.56 of electron transferred from Bi₂WO₆ to RGO, indicating RGO introduction could prevent the recombination of photoelectrons and holes and was beneficial for MC-LR degradation. Finally, the possible intermediate products and degradation pathways were also proposed by the LC-MS/MS analysis.

Reduced graphene oxide: Biofabrication and environmental applications

Green synthesis of high-quality reduced graphene oxide (rGO) from agro-industrial waste resources remains attractive owing to its outstanding environmental benefits. The remarkable properties of rGO include excellent morphology, uniform particle size, good optical properties, high conductivity, nontoxicity, and extraordinary chemical stability. Traditional methods for the synthesis of rGO nanomaterials involve several chemical reactions including oxidation, carbonization, toxic solvent, and pyrolysis which produce harmful byproducts. Green preparation of rGO is an emerging area of research in graphene technology which is cost-effective and sustainable in the procedure. Owing to the uniform particle rGO particle size, these smart nanomaterials have wide applicability, including in metal ions and pollutant sensing and adsorption, photocatalysis, optoelectrical devices, medical diagnosis, and drug delivery. Here we review the physicochemical properties of rGO, the biowaste sources and green methods of rGO synthesis, and the diverse applications of rGO, including in water purification and the biomedical fields. With this review, covering more than 200 research articles published on rGO in the last eight years ending in 2022, we aim to provide a quick guide for researchers seeking up-to-date information on the properties, production, and applicability of rGO, with special attention to rGO applications in water purification and the biomedical fields.

Tracking side reactions of the inverse vulcanization process and developing monomer selection guidelines

Various olefin monomers were inverse-vulcanized. The structural analysis and evaluation of the thermal stability of the products revealed that aliphatic internal olefins are suitable monomers for suppressing side reactions.