Purification, cloning and characterisation of two forms of thermostable and highly active cellobiohydrolase I (Cel7A) produced by the industrial strain of Chrysosporium lucknowense

The role of intracellular β-glucosidase in cellulolytic response induction in filamentous fungus Penicillium verruculosum

In this study, CRISPR/Cas9 genome editing was used to knockout the bgl2 gene encoding intracellular β-glucosidase filamentous fungus Penicillium verruculosum. This resulted in a dramatic reduction of secretion of cellulolytic enzymes. The study of P. verruculosum Δbgl2 found that the transcription of the cbh1 gene, which encodes cellobiohydrolase 1, was impaired when induced by cellobiose and cellotriose. However, the transcription of the cbh1 gene remains at level of the host strain when induced by gentiobiose. This implies that gentiobiose is the true inducer of the cellulolytic response in P. verruculosum, in contrast to Neurospora crassa where cellobiose acts as an inducer.

Structural and thermostability insights into cellobiohydrolase of a thermophilic mould Myceliophthora thermophila: in-silico studies

Cellobiohydrolase (CBH) is one of the cellulases with a wide range of industrial applications; it plays a pivotal role in cellulose hydrolysis and thus in biofuel production. The structural and thermostability analysis of a CBHII of the thermophilic mold Myceliophthora thermophila (MtCel6A) had been carried out using various in-silico approaches. The validation of 3 D model by the Ramachandran plot indicated 88.5% amino acid residues in the favoured regions. Docking analysis suggested MtCel6A to display a high affinity towards cellotetraose as compared to other substrates. The enzyme exhibited a high tolerance to the end product, cellobiose. The thermostability evaluation by molecular dynamic simulations and principal component analysis confirmed its tolerance to elevated temperatures. The identified thermolabile regions could be targeted for site-directed mutagenesis in order to ameliorate thermostability further. Our experimental data published earlier confirmed the present findings of in-silico studies. The structural and functional characteristics of MtCel6A highlighted its critical features that make it a useful biocatalyst in several industrial processes.Communicated by Ramaswamy H. Sarma.

Recombinant cellobiohydrolase of Myceliophthora thermophila: characterization and applicability in cellulose saccharification

A codon optimized cellobiohydrolase (CBH) encoding synthetic gene of 1188 bp from a thermophilic mold Myceliophthora thermophila (MtCel6A) was cloned and heterologously expressed in Escherichia coli for the first time. In silico analysis suggested that MtCel6A is a GH6 CBH and belongs to CBHII family, which is structurally similar to Cel6A of Humicola insolens. The recombinant MtCel6A is expressed as active inclusion bodies, and the molecular mass of the purified enzyme is ~ 45 kDa. The rMtCel6A is active in a wide range of pH (4-12) and temperatures (40-100 °C) with optima at pH 10.0 and 60 °C. It exhibits T1/2 of 6.0 and 1.0 h at 60 and 90 °C, respectively. The rMtCel6A is an extremozyme with organic solvent, salt and alkali tolerance. The Km, Vmax, kcat and kcat/Km values of the enzyme are 3.2 mg mL-1, 222.2 μmol mg-1 min-1, 2492 s-1 and 778.7 s-1 mg-1 mL-1, respectively. The product analysis of rMtCel6A confirmed that it is an exoenzyme that acts from the non-reducing end of cellulose. The addition of rMtCel6A to the commercial cellulase mix (Cellic CTec2) led to 1.9-fold increase in saccharification of the pre-treated sugarcane bagasse. The rMtCel6A is a potential CBH that finds utility in industrial processes such as in bioethanol, paper pulp and textile industries.

A study elucidating the relation between cellulose dissolution and crystallinity after cellulase treatment at different doses

Cellulose is the most abundant renewable resource which has found a diverse range of applications. Cellulose dissolution is a significant property for manufacturing man-made cellulosic fiber through viscose process. Crystalline microfibrillar structure and relatively high ordered packing of polymeric chains contribute to recalcitrance and poor reactivity of cellulose. One of the most common methods to improve cellulose dissolution is cellulase treatment. Herein, cellulase treatment at different doses was studied to explore the correlation of cellulose dissolution with crystallinity. Pulp showed improvement in Fock reactivity and other properties related to viscose application. But contrary to previous studies, cellulose crystallinity as determined by XRD and FTIR did not correlate with Fock reactivity at a higher dose of cellulase. The results indicated some complex mechanism to be involved between the cellulose dissolution and crystallinity than a simple negative correlation. Cellulase treatment at 150 HCU/g resulted in the upgraded pulp suitable for viscose application.

An engineered cellobiohydrolase I for sustainable degradation of lignocellulosic biomass

This study provides computational-assisted engineering of the cellobiohydrolase I (CBH-I) from Penicillium verruculosum with simultaneous enhanced thermostability and tolerance in ionic liquids, deep eutectic solvent, and concentrated seawater without affecting its wild-type activity. Engineered triple variant CBH-I R1 (A65R-G415R-S181F) showed 2.48-fold higher thermostability in terms of relative activity at 65°C after 1 h of incubation when compared with CBH-I wild type. CBH-I R1 exhibited 1.87-fold, 1.36-fold, and 1.57-fold higher specific activities compared with CBH-I wild type in [Bmim]Cl (50 g/L), [Ch]Cl (50 g/L), and two-fold concentrated seawater, respectively. In the multicellulases mixture, CBH-I R1 showed higher hydrolytic efficiency to hydrolyze aspen wood compared with CBH-I wild type in the buffer, [Bmim]Cl (50 g/L), and two-fold concentrated seawater, respectively. Structural analysis revealed a molecular basis for the higher stability of the CBH-I structure in which A65R and G415R substitutions form salt bridges (D64 … R65, E411 … R415) and S181F forms π-π interaction (Y155 … F181), leading to stabilize surface-exposed flexible α-helixes and loop in the multidomain β-jelly roll fold structure, respectively. In conclusion, the variant CBH-I R1 could enable efficient lignocellulosic biomass degradation as a cost-effective alternative for the sustainable production of biofuels and value-added chemicals.

Myceliophthora thermophila Xyr1 is predominantly involved in xylan degradation and xylose catabolism

BACKGROUND

Myceliophthora thermophila is a thermophilic ascomycete fungus that is used as a producer of enzyme cocktails used in plant biomass saccharification. Further development of this species as an industrial enzyme factory requires a detailed understanding of its regulatory systems driving the production of plant biomass-degrading enzymes. In this study, we analyzed the function of MtXlr1, an ortholog of the (hemi-)cellulolytic regulator XlnR first identified in another industrially relevant fungus, Aspergillus niger.

RESULTS

The Mtxlr1 gene was deleted and the resulting strain was compared to the wild type using growth profiling and transcriptomics. The deletion strain was unable to grow on xylan and d-xylose, but showed only a small growth reduction on l-arabinose, and grew similar to the wild type on Avicel and cellulose. These results were supported by the transcriptome analyses which revealed reduction of genes encoding xylan-degrading enzymes, enzymes of the pentose catabolic pathway and putative pentose transporters. In contrast, no or minimal effects were observed for the expression of cellulolytic genes.

CONCLUSIONS

Myceliophthora thermophila MtXlr1 controls the expression of xylanolytic genes and genes involved in pentose transport and catabolism, but has no significant effects on the production of cellulases. It therefore resembles more the role of its ortholog in Neurospora crassa, rather than the broader role described for this regulator in A. niger and Trichoderma reesei. By revealing the range of genes controlled by MtXlr1, our results provide the basic knowledge for targeted strain improvement by overproducing or constitutively activating this regulator, to further improve the biotechnological value of M. thermophila.

Complex effect of lignocellulosic biomass pretreatment with 1-butyl-3-methylimidazolium chloride ionic liquid on various aspects of ethanol and fumaric acid production by immobilized cells within SSF

The pretreatment of softwood and hardwood samples (spruce and hornbeam wood) with 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) was undertaken for further simultaneous enzymatic saccharification of renewable non-food lignocellulosic biomass and microbial fermentation of obtained sugars to ethanol and fumaric acid. A multienzyme cocktail based on cellulases and yeast or fungus cells producing ethanol and fumaric acid were the main objects of [Bmim]Cl influence studies. A complex effect of lignocellulosic biomass pretreatment with [Bmim]Cl on various aspects of the process (both action of cellulases and microbial conversion of hydrolysates to target products) was revealed. Positive effects of the pretreatment with [Bmim]Cl included decreasing the lignin content in the biomass, and increasing the effectiveness of enzymatic hydrolysis and microbial transformation of pretreated biomass. Immobilized cells of both yeasts and fungi possessed improved productive characteristics in the biotransformation of biomass pretreated with [Bmim]Cl to ethanol and fumaric acid.

Biochemical and structural insights into a thermostable cellobiohydrolase from Myceliophthora thermophila

Cellobiohydrolases hydrolyze cellulose, a linear polymer with glucose monomers linked exclusively by β-1,4 glycosidic linkages. The widespread hydrogen bonding network tethers individual cellulose polymers forming crystalline cellulose, which prevent the access of hydrolytic enzymes and water molecules. The most abundant enzyme secreted by Myceliophthora thermophila M77 in response to the presence of biomass is the cellobiohydrolase MtCel7A, which is composed by a GH7-catalytic domain (CD), a linker, and a CBM1-type carbohydrate-binding module. GH7 cellobiohydrolases have been studied before, and structural models have been proposed. However, currently available GH7 crystal structures only define separate catalytic domains and/or cellulose-binding modules and do not include the full-length structures that are involved in shaping the catalytic mode of operation. In this study, we determined the 3D structure of catalytic domain using X-ray crystallography and retrieved the full-length enzyme envelope via small-angle X-ray scattering (SAXS) technique. The SAXS data reveal a tadpole-like molecular shape with a rigid linker connecting the CD and CBM. Our biochemical studies show that MtCel7A has higher catalytic efficiency and thermostability as well as lower processivity when compared to the well-studied TrCel7A from Trichoderma reesei. Based on a comparison of the crystallographic structures of CDs and their molecular dynamic simulations, we demonstrate that MtCel7A has considerably higher flexibility than TrCel7A. In particular, loops that cover the active site are more flexible and undergo higher conformational fluctuations, which might account for decreased processivity and enhanced enzymatic efficiency. Our statistical coupling analysis suggests co-evolution of amino acid clusters comprising the catalytic site of MtCel7A, which correlate with the steps in the catalytic cycle of the enzyme.

DATABASE

The atomic coordinates and structural factors of MtCel7A have been deposited in the Protein Data Bank with accession number 5W11.

Additives enhancing enzymatic hydrolysis of lignocellulosic biomass

Linked to the development of cellulolytic enzyme cocktails from Myceliophthora thermophila, we studied the effect of different additives on the enzymatic hydrolysis yield. The hydrolysis of pretreated corn stover (PCS), sugar cane straw (PSCS) and microcrystalline cellulose (Avicel) was performed under industrial conditions using high solid loadings, limited mixing, and low enzyme dosages. The addition of polyethylene glycol (PEG4000) allowed to increase the glucose yields by 10%, 7.5%, and 32%, respectively in the three materials. PEG4000 did not have significant effect on the stability of the main individual enzymes but increased beta-glucosidase and endoglucanase activity by 20% and 60% respectively. Moreover, the presence of PEG4000 accelerated cellulase-catalyzed hydrolysis reducing up to 25% the liquefaction time. However, a preliminary economical assessment concludes that even with these improvements, a lower contribution of PEG4000 to the 2G bioethanol production costs would be needed to reach commercial feasibility.

Enzymatic saccharification of pretreated rice straw by cellulases from Aspergillus niger BK01

Alkali-assisted acid pretreated rice straw was saccharified using cellulase from Aspergillus niger BK01. The cellulase production by the fungus was enhanced by parametric optimization using solid-state fermentation conditions. Maximum cellulase production (12.0 U/gds of carboxymethyl cellulase, CMCase) was achieved in 96 h, using 6.0% substrate concentration, 7.5% inoculum concentration, 1:2 solid to liquid ratio, at pH 5.5, and temperature 28 °C, by supplementation of the fermentation medium with 0.1% carboxymethylcellulose and 0.1% ammonium nitrate. Characterization of crude cellulases showed that highest CMCase activity was observed at pH 4.8 and temperature 40 °C. The CMCase was stable from pH 4.8-5.5 and at a temperature range of 35-50 °C. The pretreated biomass was subjected to hydrolysis with the fungal cellulases. The saccharification optimization studies showed that 2% (v/v) enzyme concentration and hydrolysis time of 2.5 h were optimum for maximum yield, i.e, 23.78% sugars and 35.96% saccharification value.

Stimulation and inhibition of enzymatic hydrolysis by organosolv lignins as determined by zeta potential and hydrophobicity

BACKGROUND

Lignin typically inhibits enzymatic hydrolysis of cellulosic biomass, but certain organosolv lignins or lignosulfonates enhance enzymatic hydrolysis. The hydrophobic and electrostatic interactions between lignin and cellulases play critical roles in the enzymatic hydrolysis process. However, how to incorporate these two interactions into the consideration of lignin effects has not been investigated.

RESULTS

We examined the physicochemical properties and the structures of ethanol organosolv lignins (EOL) from hardwood and softwood and ascertained the association between lignin properties and their inhibitory and stimulatory effects on enzymatic hydrolysis. The zeta potential and hydrophobicity of EOL lignin samples, isolated from organosolv pretreatment of cottonwood (CW), black willow (BW), aspen (AS), eucalyptus (EH), and loblolly pine (LP), were determined and correlated with their effects on enzymatic hydrolysis of Avicel. EOLs from CW, BW, and AS improved the 72 h hydrolysis yield by 8-12%, while EOLs from EH and LP decreased the 72 h hydrolysis yield by 6 and 16%, respectively. The results showed a strong correlation between the 72 h hydrolysis yield with hydrophobicity and zeta potential. The correlation indicated that the hydrophobicity of EOL had a negative effect and the negative zeta potential of EOL had a positive effect. HSQC NMR spectra showed that β-O-4 linkages in lignin react with ethanol to form an α-ethoxylated β-O-4' substructure (A') during organosolv pretreatment. Considerable amounts of C_2,6-H_2,6 correlation in p-hydroxybenzoate (PB) units were observed for EOL-CW, EOL-BW, and EOL-AS, but not for EOL-EH and EOL-LP.

CONCLUSIONS

This study revealed that the effect of lignin on enzymatic hydrolysis is a function of both hydrophobic interactions and electrostatic repulsions. The lignin inhibition is controlled by lignin hydrophobicity and the lignin stimulation is governed by the negative zeta potential. The net effect of lignin depends on the combined influence of hydrophobicity and zeta potential. This study has potential implications in biomass pretreatment for the reduction of lignin inhibition by increasing lignin negative zeta potential and decreasing hydrophobicity.

Using an Inducible Promoter of a Gene Encoding Penicillium verruculosum Glucoamylase for Production of Enzyme Preparations with Enhanced Cellulase Performance

Background

Penicillium verruculosum is an efficient producer of highly active cellulase multienzyme system. One of the approaches for enhancing cellulase performance in hydrolysis of cellulosic substrates is to enrich the reaction system with β -glucosidase and/or accessory enzymes, such as lytic polysaccharide monooxygenases (LPMO) displaying a synergism with cellulases.

Results

Genes bglI, encoding β-glucosidase from Aspergillus niger (AnBGL), and eglIV, encoding LPMO (formerly endoglucanase IV) from Trichoderma reesei (TrLPMO), were cloned and expressed by P. verruculosum B1-537 strain under the control of the inducible gla1 gene promoter. Content of the heterologous AnBGL in the secreted multienzyme cocktails (hBGL1, hBGL2 and hBGL3) varied from 4 to 10% of the total protein, while the content of TrLPMO in the hLPMO sample was ~3%. The glucose yields in 48-h hydrolysis of Avicel and milled aspen wood by the hBGL1, hBGL2 and hBGL3 preparations increased by up to 99 and 80%, respectively, relative to control enzyme preparations without the heterologous AnBGL (at protein loading 5 mg/g substrate for all enzyme samples). The heterologous TrLPMO in the hLPMO preparation boosted the conversion of the lignocellulosic substrate by 10–43%; however, in hydrolysis of Avicel the hLPMO sample was less effective than the control preparations. The highest product yield in hydrolysis of aspen wood was obtained when the hBGL2 and hLPMO preparations were used at the ratio 1:1.

Conclusions

The enzyme preparations produced by recombinant P. verruculosum strains, expressing the heterologous AnBGL or TrLPMO under the control of the gla1 gene promoter in a starch-containing medium, proved to be more effective in hydrolysis of a lignocellulosic substrate than control enzyme preparations without the heterologous enzymes. The enzyme composition containing both AnBGL and TrLPMO demonstrated the highest performance in lignocellulose hydrolysis, providing a background for developing a fungal strain capable to express both heterologous enzymes simultaneously.

Recombinant expression of thermostable processive MtEG5 endoglucanase and its synergism with MtLPMO from Myceliophthora thermophila during the hydrolysis of lignocellulosic substrates

BACKGROUND

Filamentous fungi are among the most powerful cellulolytic organisms in terrestrial ecosystems. To perform the degradation of lignocellulosic substrates, these microorganisms employ both hydrolytic and oxidative mechanisms that involve the secretion and synergism of a wide variety of enzymes. Interactions between these enzymes occur on the level of saccharification, i.e., the release of neutral and oxidized products, but sometimes also reflected in the substrate liquefaction. Although the synergism regarding the yield of neutral sugars has been extensively studied, further studies should focus on the oxidized sugars, as well as the effect of enzyme combinations on the viscosity properties of the substrates.

RESULTS

In the present study, the heterologous expression of an endoglucanase (EG) and its combined activity together with a lytic polysaccharide monooxygenase (LPMO), both from the thermophilic fungus Myceliophthora thermophila, are described. The EG gene, belonging to the glycoside hydrolase family 5, was functionally expressed in the methylotrophic yeast Pichia pastoris. The produced MtEG5A (75 kDa) featured remarkable thermal stability and showed high specific activity on microcrystalline cellulose compared to CMC, which is indicative of its processivity properties. The enzyme was capable of releasing high amounts of cellobiose from wheat straw, birch, and spruce biomass. Addition of MtLPMO9 together with MtEG5A showed enhanced enzymatic hydrolysis yields against regenerated amorphous cellulose (PASC) by improving the release not only of the neutral but also of the oxidized sugars. Assessment of activity of MtEG5A on the reduction of viscosity of PASC and pretreated wheat straw using dynamic viscosity measurements revealed that the enzyme is able to perform liquefaction of the model substrate and the natural lignocellulosic material, while when added together with MtLPMO9, no further synergistic effect was observed.

CONCLUSIONS

The endoglucanase MtEG5A from the thermophilic fungus M. thermophila exhibited excellent properties that render it a suitable candidate for use in biotechnological applications. Its strong synergism with LPMO was reflected in sugars release, but not in substrate viscosity reduction. Based on the level of oxidative sugar formation, this is the first indication of synergy between LPMO and EG reported.

Management of enzyme diversity in high-performance cellulolytic cocktails

BACKGROUND

Modern biorefineries require enzymatic cocktails of improved efficiency to generate fermentable sugars from lignocellulosic biomass. Cellulolytic fungi, among other microorganisms, have demonstrated the highest potential in terms of enzymatic productivity, complexity and efficiency. On the other hand, under cellulolytic-inducing conditions, they often produce a considerable diversity of carbohydrate-active enzymes which allow them to adapt to changing environmental conditions. However, industrial conditions are fixed and adjusted to the optimum of the whole cocktail, resulting in underperformance of individual enzymes.

RESULTS

One of these cellulolytic cocktails from Myceliophthora thermophila has been analyzed here by means of LC-MS/MS. Pure GH6 family members detected have been characterized, confirming previous studies, and added to whole cocktails to compare their contribution in the hydrolysis of industrial substrates. Finally, independent deletions of two GH6 family members, as an example of the enzymatic diversity management, led to the development of a strain producing a more efficient cellulolytic cocktail.

CONCLUSIONS

These data indicate that the deletion of noncontributive cellulases (here EG VI) can increase the cellulolytic efficiency of the cocktail, validating the management of cellulase diversity as a strategy to obtain improved fungal cellulolytic cocktails.

Proteomic analysis of the biomass hydrolytic potentials of Penicillium oxalicum lignocellulolytic enzyme system

BACKGROUND

The mining of high-performance enzyme systems is necessary to develop industrial lignocellulose bioconversion. Large amounts of cellulases and hemicellulases can be produced by Penicillium oxalicum. Hence, the enzyme system of this hypercellulolytic fungus should be elucidated to help design optimum enzyme systems for effective biomass hydrolysis.

RESULTS

The cellulolytic and xylanolytic activities of an SP enzyme system prepared from P. oxalicum JU-A10 were comparatively analyzed. Results indicated that the fungus possesses a complete cellulolytic-xylanolytic enzyme system. The cellobiohydrolase- and xylanase-specific activities of this system were higher than those of two other enzyme systems, i.e., ST from Trichoderma reesei SN1 and another commercial preparation Celluclast 1.5L. Delignified corncob residue (DCCR) could be hydrolyzed by SP to a greater extent than corncob residue (CCR). Beta-glucosidase (BG) supplemented in SP increased the ability of the system to hydrolyze DCCR and CCR, and resulted in a 64 % decrease in enzyme dosage with the same glucose yield. The behaviors of the enzyme components in the hydrolysis of CCR were further investigated by monitoring individual enzyme dynamics. The total protein concentrations and cellobiohydrolase (CBH), endoglucanase (EG), and filter paper activities in the supernatants significantly decreased during saccharification. These findings were more evident in SP than in the other enzyme systems. The comparative proteomic analysis of the enzyme systems revealed that both SP and ST were rich in carbohydrate-degrading enzymes and multiple non-hydrolytic proteins. A larger number of carbohydrate-binding modules 1 (CBM1) were also identified in SP than in ST. This difference might be linked to the greater adsorption to substrates and lower hydrolysis efficiency of SP enzymes than ST during lignocellulose saccharification, because CBM1 not only targets enzymes to insoluble cellulose but also leads to non-productive adsorption to lignin.

CONCLUSIONS

Penicillium oxalicum can be applied to the biorefinery of lignocellulosic biomass. Its ability to degrade lignocellulosic substrates could be further improved by modifying its enzyme system on the basis of enzyme activity measurement and proteomic analysis. The proposed strategy may also be applied to other lignocellulolytic enzyme systems to enhance their hydrolytic performances rationally.

Homologous cloning, purification and characterization of highly active cellobiohydrolase I (Cel7A) from Penicillium canescens

Penicillium canescens is a filamentous fungus that normally does not secrete notable levels of cellulase activity. Cellobiohydrolase I of P. canescens (PcCel7A) was homologously cloned into a host strain RN3-11-7 (niaD-) and then expressed under the control of a strong xylA promoter. Using three steps of chromatography, PcCel7A was purified. The enzyme displayed maximum activity at pH 4.0-4.5. PcCel7A was stable at 50°C and pH 4.5 at least for 3h, while at 60°C it lost 45% of activity after 30min of incubation. When equalized by protein concentration, PcCel7A demonstrated a higher performance in prolonged hydrolysis of Avicel and milled aspen wood than CBH I (Cel7A) from Trichoderma reesei, the most industrially utilized cellulase at this moment. The high catalytic efficiency of the PcCel7A makes it a potential candidate for industrial applications.

Genomic insights into the fungal lignocellulolytic system of Myceliophthora thermophila

The microbial conversion of solid cellulosic biomass to liquid biofuels may provide a renewable energy source for transportation fuels. Cellulolytic fungi represent a promising group of organisms, as they have evolved complex systems for adaptation to their natural habitat. The filamentous fungus Myceliophthora thermophila constitutes an exceptionally powerful cellulolytic microorganism that synthesizes a complete set of enzymes necessary for the breakdown of plant cell wall. The genome of this fungus has been recently sequenced and annotated, allowing systematic examination and identification of enzymes required for the degradation of lignocellulosic biomass. The genomic analysis revealed the existence of an expanded enzymatic repertoire including numerous cellulases, hemicellulases, and enzymes with auxiliary activities, covering the most of the recognized CAZy families. Most of them were predicted to possess a secretion signal and undergo through post-translational glycosylation modifications. These data offer a better understanding of activities embedded in fungal lignocellulose decomposition mechanisms and suggest that M. thermophila could be made usable as an industrial production host for cellulolytic and hemicellulolytic enzymes.

Investigation of the porous structure of cellulosic substrates through confocal laser scanning microscopy

At the most fundamental level, saccharification occurs when cell wall degrading enzymes (CWDEs) diffuse, bind to and react on readily accessible cellulose fibrils. Thus, the study of the diffusive behavior of solutes into and out of cellulosic substrates is important for understanding how biomass pore size distribution affects enzyme transport, binding, and catalysis. In this study, fluorescently labeled dextrans with molecular weights of 20, 70, and 150 kDa were used as probes to assess their diffusion into the porous structure of filter paper. Fluorescence microscopy with high numerical aperture objectives was used to generate high temporal and spatial resolution datasets of probe concentrations versus time. In addition, two diffusion models, including a simple transient diffusion and a pore grouping diffusion models, were developed. These models and the experimental datasets were used to investigate solute diffusion in macro- and micro-pores. Nonlinear least squares fitting of the datasets to the simple transient model yielded diffusion coefficient estimates that were inadequate for describing the initial fast diffusion and the later slow diffusion rates observed; on the other hand, nonlinear least squares fitting of the datasets to the pore grouping diffusion model yielded estimations of the micro-pore diffusion coefficient that described the inherently porous structure of plant-derived cellulose. In addition, modeling results show that on average 75% of the accessible pore volume is available for fast diffusion without any significant pore hindrance. The method developed can be applied to study the porous structure of plant-derived biomass and help assess the diffusion process for enzymes with known sizes.

Fungal protein production: design and production of chimeric proteins

For more than a century, filamentous fungi have been used for the production of a wide variety of endogenous enzymes of industrial interest. More recently, with the use of genetic engineering tools developed for these organisms, this use has expanded for the production of nonnative heterologous proteins. In this review, an overview is given of examples describing the production of a special class of these proteins, namely chimeric proteins. The production of two types of chimeric proteins have been explored: (a) proteins grafted for a specific substrate-binding domain and (b) fusion proteins containing two separate enzymatic activities. Various application areas for the use of these chimeric proteins are described.

Purification and characterization of a novel cellobiohydrolase (PdCel6A) from Penicillium decumbens JU-A10 for bioethanol production

An acidic Cel6A, cellobiohydrolase (CBH) II, was purified from Penicillium decumbens and designated as PdCel6A. The deduced internal amino acid sequence of the novel CBH has a high degree of sequence identity with the CBH II from Aspergillus fumigatus. Surprisingly, PdCel6A exhibits characteristics comparable to that of CBH I, as well as CBH II. Similar to CBH I, the novel CBH has a specific activity of 1.9 IU/mg against p-nitrophenyl-β-d-cellobioside. The enzyme retains about 80% of its maximum activity after 4h of incubation at pH 2.0. Using delignified corncob residue as the substrate, ethanol concentration increased by 20% during simultaneous saccharification and fermentation when supplemented with low doses of PdCel6A (0.2mg/g substrate). To our knowledge, this is the first report involving a CBH I-like CBH II. The present paper provides new insight into the role of CBH II in cellulose degradation.

Cellulases of Penicillium verruculosum

Nine major cellulolytic enzymes were isolated from a culture broth of a mutant strain of the fungus Penicillium verruculosum: five endo-1, 4-beta-glucanases (EGs) having molecular masses 25, 33, 39, 52, and 70 kDa, and four cellobiohydrolases (CBHs: 50, 55, 60, and 66 kDa). Based on amino acid similarities of short sequenced fragments and peptide mass fingerprinting, the isolated enzymes were preliminary classified into different families of glycoside hydrolases: Cel5A (EG IIa, 39 kDa), Cel5B (EG IIb, 33 kDa), Cel6A (CBH II, two forms: 50 and 60 kDa), Cel7A (CBH I: 55 and 66 kDa), Cel7B (EG I: 52 and 70 kDa). The 25 kDa enzyme was identical to the previously isolated Cel12A (EG III). The family assignment was further confirmed by the studies of the substrate specificity of the purified enzymes. High-molecular-weight forms of the Cel6A, Cel7A, and Cel7B were found to possess a cellulose-binding module (CBM), while the catalytically active low-molecular-weight forms of the enzymes, as well as other cellulases, lacked the CBM. Properties of the isolated enzymes, such as substrate specificity toward different polysaccharides and synthetic glycosides, effect of pH and temperature on the enzyme activity and stability, adsorption on Avicel cellulose and kinetics of its hydrolysis, were investigated.

Processive endoglucanases mediate degradation of cellulose by Saccharophagus degradans

Bacteria and fungi are thought to degrade cellulose through the activity of either a complexed or a noncomplexed cellulolytic system composed of endoglucanases and cellobiohydrolases. The marine bacterium Saccharophagus degradans 2-40 produces a multicomponent cellulolytic system that is unusual in its abundance of GH5-containing endoglucanases. Secreted enzymes of this bacterium release high levels of cellobiose from cellulosic materials. Through cloning and purification, the predicted biochemical activities of the one annotated cellobiohydrolase Cel6A and the GH5-containing endoglucanases were evaluated. Cel6A was shown to be a classic endoglucanase, but Cel5H showed significantly higher activity on several types of cellulose, was the highest expressed, and processively released cellobiose from cellulosic substrates. Cel5G, Cel5H, and Cel5J were found to be members of a separate phylogenetic clade and were all shown to be processive. The processive endoglucanases are functionally equivalent to the endoglucanases and cellobiohydrolases required for other cellulolytic systems, thus providing a cellobiohydrolase-independent mechanism for this bacterium to convert cellulose to glucose.

An optimized microplate assay system for quantitative evaluation of plant cell wall-degrading enzyme activity of fungal culture extracts

Developing enzyme cocktails for cellulosic biomass hydrolysis complementary to current cellulase systems is a critical step needed for economically viable biofuels production. Recent genomic analysis indicates that some plant pathogenic fungi are likely a largely untapped resource in which to prospect for novel hydrolytic enzymes for biomass conversion. In order to develop high throughput screening assays for enzyme bioprospecting, a standardized microplate assay was developed for rapid analysis of polysaccharide hydrolysis by fungal extracts, incorporating biomass substrates. Fungi were grown for 10 days on cellulose- or switchgrass-containing media to produce enzyme extracts for analysis. Reducing sugar released from filter paper, Avicel, corn stalk, switchgrass, carboxymethylcellulose, and arabinoxylan was quantified using a miniaturized colorimetric assay based on 3,5-dinitrosalicylic acid. Significant interactions were identified among fungal species, growth media composition, assay substrate, and temperature. Within a small sampling of plant pathogenic fungi, some extracts had crude activities comparable to or greater than T. reesei, particularly when assayed at lower temperatures and on biomass substrates. This microplate assay system should prove useful for high-throughput bioprospecting for new sources of novel enzymes for biofuel production.

Thermoascus aurantiacus CBHI/Cel7A production in Trichoderma reesei on alternative carbon sources

To develop functional enzymes in cellulose hydrolysis at or above 70 degrees C the cellobiohydrolase (CBHI/Cel7A) of Thermoascus aurantiacus was cloned and expressed in Trichoderma reesei Rut-C30 under the strong cbh1 promoter. Cellulase production of the parental strain and the novel strain (RF6026) was examined in submerged fermentation experiments using various carbon sources, which were lactose, Solka Floc 200 cellulose powder, and steam pretreated corn stover. An industrially feasible production medium was used containing only distiller's spent grain, KH(2)PO(4), and (NH(4))(2)SO(4). Enzyme production was followed by measurements of protein concentration, total cellulase enzyme activity (filter paper activity), beta-glucosidase activity, CBHI activity, and endogenase I (EGI) activity. The Thermoascus CBHI/Cel7A activity was taken as an indication of the heterologous gene expression under the cbh1 promoter.

Identification and expression of cellobiohydrolase (CBHI) gene from an endophytic fungus, Fusicoccum sp. (BCC4124) in Pichia pastoris

A gene encoding a cellobiohydrolase (CBHI) was isolated from Fusicoccum sp. (BCC4124), an endophytic fungus belongs in phylum Ascomycota, using 5' and 3' rapid amplification of cDNA end (RACE) technique. This CBHI gene contains 1395 nucleotides and encodes a 465-amino acid protein with a molecular weight of approximately 50 kDa. The deduced amino acid sequence showed significant similarity to those of other fungal CBHI belonging to family 7 of glycosyl hydrolase. Interestingly, the result from the amino acid alignment revealed that this CBHI does not contain the cellulose binding domain nor the linker region. The CBHI gene was successfully expressed in Pichia pastoris KM71. The purified recombinant CBHI has ability to hydrolyze Avicel, filter paper and 4-methylumbelliferyl beta-d-cellobioside (MUC) but not carboxymethylcellulose (CMC). It showed an optimal working condition at 40 degrees C, pH 5 with K(m) and V(max) toward MUC of 0.57 mM and 3.086 nmol/min/mg protein, respectively. The purified enzyme was stable at pH range of 3-11. The enzyme retained approximately 50% of its maximal activity after incubating at 70-90 degrees C for 30 min. Due to its stability through wide range of pH, and moderately stable at high temperature, this enzyme has potential in various biotechnology applications.

Design of highly efficient cellulase mixtures for enzymatic hydrolysis of cellulose

An extremely highly active cellobiohydrolase (CBH IIb or Cel6B) was isolated from Chrysosporium lucknowense UV18-25 culture filtrate. The CBH IIb demonstrated the highest ability for a deep degradation of crystalline cellulose amongst a few cellobiohydrolases tested, including C. lucknowense CBH Ia, Ib, IIa, and Trichoderma reesei CBH I and II. Using purified C. lucknowense enzymes (CBH Ia, Ib, and IIb; endoglucanases II and V; beta-glucosidase, xylanase II), artificial multienzyme mixtures were reconstituted, displaying an extremely high performance in a conversion of different cellulosic substrates (Avicel, cotton, pretreated Douglas fir wood) to glucose. These mixtures were much or notably more effective in hydrolysis of the cellulosic substrates than the crude multienzyme C. lucknowense preparation and other crude cellulase samples produced by T. reesei and Penicillium verruculosum. Highly active cellulases are a key factor in bioconversion of plant lignocellulosic biomass to ethanol as an alternative to fossil fuels.

Potential and utilization of thermophiles and thermostable enzymes in biorefining

In today's world, there is an increasing trend towards the use of renewable, cheap and readily available biomass in the production of a wide variety of fine and bulk chemicals in different biorefineries. Biorefineries utilize the activities of microbial cells and their enzymes to convert biomass into target products. Many of these processes require enzymes which are operationally stable at high temperature thus allowing e.g. easy mixing, better substrate solubility, high mass transfer rate, and lowered risk of contamination. Thermophiles have often been proposed as sources of industrially relevant thermostable enzymes. Here we discuss existing and potential applications of thermophiles and thermostable enzymes with focus on conversion of carbohydrate containing raw materials. Their importance in biorefineries is explained using examples of lignocellulose and starch conversions to desired products. Strategies that enhance thermostablity of enzymes both in vivo and in vitro are also assessed. Moreover, this review deals with efforts made on developing vectors for expressing recombinant enzymes in thermophilic hosts.