Decolourization and biodegradation of methylene blue dye by a ligninolytic enzyme-producing Bacillus thuringiensis: degradation products and pathway

Selective pressure leads to an improved synthetic consortium fit for dye degradation

Microorganisms have great potential for bioremediation as they have powerful enzymes and machineries that can transform xenobiotics. The use of a microbial consortium provides more advantages in application point of view than pure cultures due to cross-feeding, adaptations, functional redundancies, and positive interactions among the organisms. In this study, we screened about 107 isolates for their ability to degrade dyes in aerobic conditions and without additional carbon source. From our screening results, we finally limited our synthetic consortium to Gordonia and Rhodococcus isolates. The synthetic consortium was trained and optimized for azo dye degradation using sequential treatment of small aromatic compounds such as phenols that act as selective pressure agents. After four rounds of optimization with different aims for each round, the consortium was able to decolorize and degrade various dyes after 48 h (80%-100% for brilliant black bn, methyl orange, and chromotrop 2b; 50-70% for orange II and reactive orange 16; 15-30% for chlorazol black e, reactive red 120, and allura red ac). Through rational approaches, we can show that treatment with phenolic compounds at micromolar dosages can significantly improve the degradation of bulky dyes and increase its substrate scope. Moreover, our selective pressure approach led to the production of various dye-degrading enzymes as azoreductase, laccase-like, and peroxidase-like activities were detected from the phenol-treated consortium. Evidence of degradation was also shown as metabolites arising from the degradation of methyl red and brilliant black bn were detected using HPLC and LC-MS analysis. Therefore, this study establishes the importance of rational and systematic screening and optimization of a consortium. Not only can this approach be applied to dye degradation, but this study also offers insights into how we can fully maximize microbial consortium activity for other applications, especially in biodegradation and biotransformation.

Functionalization of carbon from rubber fruit shells (Hevea brasiliensis) with silane agents and its application to the adsorption of bi-component mixtures of methylene blue and crystal violet

In this research, activated carbon was obtained from rubber fruit shells (ACRPs). The obtained activated carbon (ACRPs) was modified by magnetite particle coating and silanization with triethoxyiphenylsilane (TEPS) to produce a new magnetic adsorbent (ACRPs-MS). The affinity of as-prepared adsorbent (ACRPs-MS) toward methylene blue (MB) and crystal violet (CV) dyes was tested in mono-component and bi-component solutions. Structural characterization proves the success of the magnetite coating process and the silanization of ACRPs. In the infrared (IR) spectroscopy spectrum of ACRPs-MS, Si-O-Fe and Si-O-Si bonds were identified, which indicated the presence of magnetite and silane. This is also supported by the elemental composition contained in the energy-dispersive X-ray (EDX) diffractogram. In addition, the presence of the porous structure of the surface of the material and the increase in the specific surface area increase the accessibility of contaminants such as MB and CV dyes to be adsorbed to the ACRPs-MS adsorption site effectively. The experimental results showed that the adsorption of mono-component MB and CV dyes by ACRPs-MS was optimum at pH 8 and an interaction time of 60 min. The adsorption kinetics of mono-component MB and CV dyes by ACRPs-MS tended to follow pseudo-second-order kinetics (PSO) models with PSO rate constant (k2) values of 0.198 and 0.993 g mg-1 min-1, respectively. The adsorption of MB and CV dyes by ACRPs-MS in a bi-component mixture tends to follow the Langmuir isotherm model with adsorption capacity (qm) values of 85.060 and 90.504 mg g-1, respectively. Analysis of adsorption data on the bi-component mixture between MB and CV by ACRPs-MS with the Langmuir isotherm equation for a binary mixture resulted in qm of 22.645 × 10-3 mmol equiv g-1. ACRPs-MS material can be used repeatedly five times with adsorption ability > 80%. Desorption of MB and CV dyes was carried out using 0.05 M HCl solution. ACRPs-MS material was able to adsorb MB and CV dyes with a large adsorption capacity and could be used in repeated adsorption. Thus, it can be stated that ACRPs-MS can be used as an effective adsorbent for MB and CV dyes, either singly or in a bi-component mixture.

Tailoring electrospun nanocomposite fibers of polylactic acid for seamless methylene blue dye adsorption applications

The introduction of biopolymers, which are sustainable and green materials, desegregated nature's water purification proficiency with science and technology, opens a new sustainable methodology in water reclamation. In order to introduce an efficacious adsorbent system for MB dye-toxic pollutant, adsorption, providing robust mechanical properties and facile processability, a facile system was introduced via electrospinning utilizing polylactic acid (PLA) and Ti3C2Tx, viz., PMX. The addition of 3 wt.% Ti3C2Tx led to a 3-fold substantial augmentation in the uptake capacity of the membrane from 197.28 to 307 mg/g when the adsorbate concentration was 100 ppm. The adsorption followed a PSO behavior, proposing that the rate-limiting stage is chemisorption and data best fitted to Freundlich isotherm, indicating heterogeneous adsorption sites and multi-layer adsorption. Further, biodegradability was studied by simulating natural environmental conditions where the nanofibers exhibited 42-64% degradation after 270 days. Based on the result with PLA, it is anticipated that the prepared fibrous system will introduce a new perspective as a potential candidate for MB removal from wastewater, opening new directions toward the research and development in wastewater treatment with electrospun biopolymer fibers using waste PLA.

Efficient bioremediation of indigo-dye contaminated textile wastewater using native microorganisms and combined bioaugmentation-biostimulation techniques

In this work, the bioremediation of wastewater from the textile industry with indigo dye content was carried out using combined bioaugmentation, bioventilation, and biostimulation techniques. Initially, the inoculum was prepared by isolating the microorganisms from the textile wastewater in a 2 L bioreactor. Then, the respirometry technique was implemented to determine the affinity of the microorganisms and the substrate by measuring CO2 and allowed the formulation of an empirical mathematical model for the growth kinetics of the microorganism. Finally, the bioremediation was carried out in a 3 L bioreactor obtaining an indigo dye removal efficiency of 20.7 ± 1.2%, 24.0 ± 1.5%, and 29.7 ± 1.1% for equivalent wavelengths of 436 nm, 525 nm, and 620 nm. The chemical oxygen demand showed an average reduction of 88.9 ± 2.5%, going from 470.7 ± 15.6 to 52.3 ± 10.7 ppm after 30 days under constant agitation and aeration. A negative generalized exponential model was fitted to assess the affinity of the microorganism with the wastewater as a substrate by evaluating the production of CO2 during the bioremediation. Bioremediation techniques improve water discharge parameters compared to chemical treatments implemented in the industry, reducing the use of substances that can generate secondary pollution. Bioaugmentation, biostimulation, and bioventing of the textile wastewater in this study demonstrate the potential of these combined techniques to serve as an efficient alternative for indigo-contaminated wastewater in the textile industry.

Green Organo-Photooxidative Method for the Degradation of Methylene Blue Dye

This study used an organophoto-oxidative material to degrade the toxic azo dye, methylene blue (MB), due to its hazardous effects on aquatic life and humans. MB is traditionally degraded using metal-based catalysts, resulting in high costs. Several organic acids were screened for organo-photooxidative applications against various azo dyes, and ascorbic acid (AA), also known as vitamin C, was found to be best for degradation due to its high photooxidative activity. It is an eco-friendly, edible, and efficient photooxidative material. A photocatalytic box has been developed for the study of organo-photooxidative activity. It was found that when AA was added, degradation efficiency increased from 42 to 95% within 240 min. Different characterization techniques, such as HPLC and GC-MS, were used after degradation for the structural elucidation of degraded products. DFT study was done for the investigation of the mechanistic study behind the degradation process. A statistical tool, RSM, was used for the optimization of parameters (concentration of dye, catalyst, and time). This study develops sustainable and effective solutions for wastewater treatment.

Discerning the catalytic treatment of cationic dye wastewater in photoreactor comprising ternary (Co3+/Co2+)-embedded SnO2/ZnFe2O4 composite sensitive toward ultra-violet illumination

Herein, magnetic (Co3+/Co2+)-integrated SnO2, SnO2/ZnFe2O4, and ZnFe2O4 composites have been prepared from triply distilled water and 30% of isopropanol in the water medium. The phase evolution, microstructure, and magnetism were investigated successfully and tested for cationic dye wastewater degradation containing Rhodamine 6G and Methylene Blue under ultra-violet irradiation. Composite spheres are attributed to efficient heterojunction interfaces between ZnFe2O4 and SnO2 semiconductors with the support of (Co3+/Co2+) nanoparticles. The results provide a simple, low-cost, environmentally friendly, and scalable method of ternary composites to degrade mixed dyes. Co3+/Co2+-implanted SnO2/ZnFe2O4 offered narrowed bandgap energy, more light absorption, diminishing electron-hole recombination, and more charge carriers toward cationic dye wastewater than the binary components. The rate constant of Rhodamine 6G degradation was observed at 0.0237 min-1, and Methylene Blue degradation was observed at 0.0187 min-1 at 90 min under UV (λ = 365 nm) irradiation. Capturing studies of various organic reactive species and mechanisms of composites was also proposed in detail.

Biodegradation and Decolorization of Crystal Violet Dye by Cocultivation with Fungi and Bacteria

Microbial degradation of dyes is vital to understanding the fate of dyes in the environment. In this study, a fungal strain A-3 and a bacterial strain L-6, which were identified as Aspergillus fumigatus and Pseudomonas fluorescens, respectively, had been proven to efficiently degrade crystal violet (CV) dye. The decolorization of CV dye by fungal and bacterial cocultivation was investigated. The results showed that the decolorization rate of cocultures was better than monoculture (P. fluorescens in L-6 (PF), and that of A. fumigatus A-3 (AF)). Furthermore, enzymatic analysis further revealed that Lac, MnP, Lip, and NADH-DCIP reductases were involved in the biodegradation of CV dyes. UV-visible spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and gas chromatography-mass spectrometry (GC-MS) were used to examine the degradation products. GC-MS analysis showed the presence of 4-(dimethylamino) benzophenone, 3-dimethylaminophenol, benzyl alcohol, and benzaldehyde, indicating that CV was degraded into simpler compounds. The phytotoxicity tests revealed that CV degradation products were less toxic than the parent compounds, indicating that the cocultures detoxified CV dyes. As a result, the cocultures are likely to have a wide range of applications in the bioremediation of CV dyes.

Synthesis of Kaolin-Supported Nickel Oxide Composites for the Catalytic Oxidative Degradation of Methylene Blue Dye

Organic dye contamination of water is a contributing factor to environmental pollution and has a negative impact on aquatic ecology. In this study, unsupported NiO and kaolin-supported NiO composites were synthesized by a one-step wet impregnation-precipitation method through the precipitation of nickel hydroxide onto locally accessible, inexpensive, and easily treated kaolin surfaces by using sodium hydroxide as a precipitating agent. The product was calcined at 500 °C and used for the catalytic oxidative degradation of methylene blue (MB) dye in an aqueous solution. The morphology, structure, and interactions of the synthesized materials were explored by SEM, XRD, and FT-IR spectroscopy. The characterization results revealed the fabrication and the growth of NiO on the kaolin surface. To determine the catalytic oxidative degradation performance of the catalyst, many experiments have been performed using the MB dye as a model dye. The catalytic degradation tests confirmed the importance of NiO and the high catalytic activity of the synthesized NiO/kaolin composite toward MB dye degradation. The oxidative degradation results showed that the optimized precursor amount on the kaolin surface could efficiently enhance the removal of MB dye. The kinetic investigation of the catalytic degradation of MB dye fitted the pseudo-first-order kinetic model. High removal efficiency was observed after eight reuse cycles, proving the exceptional stability and reusability of the composite. The catalytic process also proceeded with a low activation energy of 30.5 kJ/mol. In conclusion, the kaolin-supported NiO composite was established to be a favorable catalyst to degrade a model dye (MB) from an aqueous solution in the presence of inexpensive and easily available NaOCl with a catalytic efficiency of the material higher than 99% of the 20.3 mg catalyst within 6 min with an apparent rate constant, kapp, higher than 0.44625 min-1, which is far better than that of the unsupported catalyst with a kapp of 0.0926 min-1 at 10 mg dose in 20 min.

Isotherms, kinetics and thermodynamic mechanism of methylene blue dye adsorption on synthesized activated carbon

The treatment of methylene blue (MB) dye wastewater through the adsorption process has been a subject of extensive research. However, a comprehensive understanding of the thermodynamic aspects of dye solution adsorption is lacking. Previous studies have primarily focused on enhancing the adsorption capacity of methylene blue dye. This study aimed to develop an environmentally friendly and cost-effective method for treating methylene blue dye wastewater and to gain insights into the thermodynamics and kinetics of the adsorption process for optimization. An adsorbent with selective methylene blue dye adsorption capabilities was synthesized using rice straw as the precursor. Experimental studies were conducted to investigate the adsorption isotherms and models under various process conditions, aiming to bridge gaps in previous research and enhance the understanding of adsorption mechanisms. Several adsorption isotherm models, including Langmuir, Temkin, Freundlich, and Langmuir-Freundlich, were applied to theoretically describe the adsorption mechanism. Equilibrium thermodynamic results demonstrated that the calculated equilibrium adsorption capacity (qe) aligned well with the experimentally obtained data. These findings of the study provide valuable insights into the thermodynamics and kinetics of methylene blue dye adsorption, with potential applications beyond this specific dye type. The utilization of rice straw as an adsorbent material presents a novel and cost-effective approach for MB dye removal from wastewater.

Electrochemical oxidation of azo dyes degradation by RuO2-IrO2-TiO2 electrode with biodegradation Aeromonas hydrophila AR1 and its degradation pathway: An integrated approach

Azo dyes are the most varied class of synthetic chemicals with non-degradable characteristics. They are complex compounds made up of many different parts. It was primarily utilized for various application procedures in the dyeing industry. Therefore, it's crucial to develop an economical and environmentally friendly approach to treating azo dyes. Our present investigation is an integrated approach to the electrooxidation (EO) process of azo dyes using RuO2-IrO2-TiO2 (anode) and titanium mesh (cathode) electrodes, followed by the biodegradation process (BD) of the treated EO dyes. Chemical oxygen demand (COD) removal efficiency as follows MB (55%) ≥ MR (45%) ≥ TB (38%) ≥ CR (37%) correspondingly. The fragment generated during the degradation process which was identified with high-resolution mass spectrometry (HRMS) and its degradation mechanism pathway was proposed as demethylation reaction and N-N and C-N/C-S cleavage reaction occurs during EO. In biodegradation studies by Aeromonas hydrophila AR1, the EO treated dyes were completely mineralized aerobically which was evident by the COD removal efficiency as MB (98%) ≥ MR (92.9%) ≥ TB (88%) ≥ CR (87%) respectively. The EO process of dyes produced intermediate components with lower molecular weights, which was effectively utilized by the Aeromonas hydrophila AR1 and resulted in higher degradation efficiency 98%. We reported the significance of the enhanced approach of electrochemical oxidation with biodegradation studies in the effective removal of the pollutants in dye industrial effluent contaminated water environment.

New roles for Bacillus thuringiensis in the removal of environmental pollutants

For a long time, the well-known Gram-positive bacterium Bacillus thuringiensis (Bt) has been extensively studied and developed as a biological insecticide for Lepidoptera and Coleoptera pests due to its ability to secrete a large number of specific insecticidal proteins. In recent years, studies have found that Bt strains can also potentially biodegrade residual pollutants in the environment. Many researchers have isolated Bt strains from multiple sites polluted by exogenous compounds and characterized and identified their xenobiotic-degrading potential. Furthermore, its pathway for degradation was also investigated at molecular level, and a number of major genes/enzymes responsible for degradation have been explored. At present, a variety of xenobiotics involved in degradation in Bt have been reported, including inorganic pollutants (used in the field of heavy metal biosorption and recovery and precious metal recovery and regeneration), pesticides (chlorpyrifos, cypermethrin, 2,2-dichloropropionic acid, etc.), organic tin, petroleum and polycyclic aromatic hydrocarbons, reactive dyes (congo red, methyl orange, methyl blue, etc.), and ibuprofen, among others. In this paper, the biodegrading ability of Bt is reviewed according to the categories of related pollutants, so as to emphasize that Bt is a powerful agent for removing environmental pollutants.

Synergistic Remediation of Organic Dye by Titanium Dioxide/Reduced Graphene Oxide Nanocomposite

In this work, nanocomposites based on titanium dioxide and reduced graphene oxide (TiO2@rGO) with different weight percentages of rGO (4, 8, and 16 wt%) were prepared by the hydrothermal/solvothermal synthesis method and thermally treated at 300 °C. The prepared nanocomposites were explored for the removal of methylene blue dye (MB) in the presence of simulated solar illumination as well as natural sunlight. The structural, morphological, chemical, and optical properties of the as-synthesized TiO2@rGO nanocomposites were characterized. The obtained results of the graphene-based nanocomposite materials indicated the existence of interactions between TiO2 and rGO, i.e., the Ti-O-C bond, which confirmed the successful integration of both components to form the TiO2@rGO nanocomposites. The addition of rGO increased the specific surface area, decreased the band gap energy, and increased the photocatalytic degradation efficiency of MB from water compared to TiO2 nanoparticles. The results of photocatalytic activity indicated that the amount of rGO in the prepared TiO2@rGO nanocomposites played a significant role in the application of different photocatalytic parameters, including the initial dye concentration, catalyst concentration, water environment, and illumination source. Our studies show that the reinforcement of the nanocomposite with 8 wt% of rGO allowed us to obtain the maximum photocatalytic decomposition performance of MB (10 mg·L-1) with a removal percentage of 99.20 after 2 h. Additionally, the obtained results show that the prepared TiO2@rGO_8 wt% nanocomposite can be used in three consecutive cycles while maintaining photocatalytic activity over 90%.

Hierarchical hollow α-Fe2O3/ZnFe2O4/Mn2O3 Janus micromotors as dynamic and efficient microcleaners for enhanced photo-Fenton elimination of organic pollutants

Micro/nanomotors that can promote mass transport have attracted more and more research concern in the photocatalysis field. Here we first report a newly-designed hierarchical α-Fe2O3/ZnFe2O4/Mn2O3 magnetic micromotor as a heterogeneous photocatalyst for the degradation of cationic dye methylene blue (MB) from wastewater. The resulting three-dimensional (3D) flower-like hollow Janus micromotors are fabricated through a green and scalable strategy, in which each component has different functions. ZnFe2O4 microspheres serve as a magnetic scaffold for the nucleation and growth of α-Fe2O3 nanosheets and for the recycling of the micromachine. α-Fe2O3 nanosheets have shown great potential as an ideal semiconductor material for the photocatalytic decontamination of pollutants. Mn2O3 nanoparticles are mainly utilized as a catalyst to produce O2 bubbles to propel the autonomic movement of the micromotors in the presence of H2O2 fuel and also as a Fenton-like catalyst to decompose H2O2 to generate reactive oxygen species. Furthermore, the resultant micromotors exhibited linear-like motion form with an average speed of 189.1 μm s-1 in 5 wt% H2O2 solution. Moreover, the self-driven micromotors exhibited a superior catalytic degradation property toward MB, which was attributed to the synergistic effect of heterogeneous photocatalyst and the boosted micro-mixing and mass transfer caused by the vigorous motion of the micro-actuator. The possible degradation intermediates and passways of MB by α-Fe2O3/ZnFe2O4/Mn2O3 micromotor were identified with time of flight mass spectroscopy (TOF-MS). The 3D Janus micromotors have the potential to be used as a high-efficiency and active heterogeneous photocatalyst for the degradation of organic pollutants.

Decolorization of reactive azo dye using novel halotolerant yeast consortium HYC and proposed degradation pathway

The presence of high salinity levels in textile wastewater poses a significant obstacle to the process of decolorizing azo dyes. The present study involved the construction of a yeast consortium HYC, which is halotolerant and was recently isolated from wood-feeding termites. The consortium HYC was mainly comprised of Sterigmatomyces halophilus SSA-1575 and Meyerozyma guilliermondii SSA-1547. The developed consortium demonstrated a decolourization efficiency of 96.1% when exposed to a concentration of 50 mg/l of Reactive Black 5 (RB5). The HYC consortium significantly decolorized RB5 up to concentrations of 400 mg/l and in the presence of NaCl up to 50 g/l. The effects of physicochemical factors and the degradation pathway were systematically investigated. The optimal pH, salinity, temperature, and initial dye concentration were 7.0, 3%, 35 °C and 50 mg/l, respectively. The co-carbon source was found to be essential, and the addition of glucose resulted in a 93% decolorization of 50 mg/l RB5. The enzymatic activity of various oxido-reductases was assessed, revealing that NADH-DCIP reductase and azo reductase exhibited greater activity in comparison to other enzymes. UV-Visible (UV-vis) spectrophotometry, Fourier-transform infrared spectroscopy (FTIR), high-performance liquid chromatography (HPLC), and gas chromatography-mass spectrometry (GC-MS) were utilized to identify the metabolites generated during the degradation of RB5. Subsequently, a metabolic pathway was proposed. The confirmation of degradation was established through alterations in the functional groups and modifications in molecular weight. The findings indicate that this halotolerant yeast consortium exhibits promising potential of degrading dye compounds. The results of this study offer significant theoretical basis and crucial perspectives for the implementation of halotolerant yeast consortia in the bioremediation of textile and hypersaline wastewater. This approach is particularly noteworthy as it does not produce aromatic amines.

Adsorption-photocatalytic degradation abilities of γ-irradiated chitosan-ZnO-AgNP composite for organic dye removal and antibacterial activity

We synthesized a γ-irradiated chitosan-ZnO-AgNPs (ICZA) composite by using a simple hydrogels method. We evaluated its adsorption/photocatalytic degradation abilities for the removal of an organic dye and its antibacterial activity. The XRD, SEM, TEM, EDS, and FTIR techniques were used to characterize the obtained samples. Based on the adsorption and degradation of methylene blue (MB) in the dark and under UV light irradiation, the adsorption and the photocatalytic activity of the as-obtained samples were evaluated. The optimum conditions for synthesizing the composite were as follows: contact time of 210 min, a dosage of 2 g/L, MB concentration of 40 mg/L, and a solution pH of 8.0. The ICZA had a high adsorption capacity, which was suitable for removing MB from the aqueous solutions; it showed a maximum adsorption capacity (qm) of 92.59 mg/g. The fit of the adsorption isotherms with the Langmuir model was satisfactory. The photocatalytic degradation ability of the composite was also better than that of other catalysts in the presence of UV light, with an apparent rate constant (kapp) of 3.08 × 10-2. The synthesized ICZA also showed good antibacterial activity against Staphylococcus aureus, with a minimum inhibitory concentration (MIC) and a minimum bactericidal concentration (MBC) of 12.5 g/mL and 50 g/mL under light-incubation and dark-incubation conditions. Finally, we discussed the hypothesized mechanism of the adsorption/photocatalytic activity and antibacterial activity of the ICZA composite in this study.

Bacteria-based biochar as a persulfate activator to degrade organic pollutants

Carbon-based catalysts for activating persulfate to drive advanced oxidation processes (AOPs) are widely used in wastewater treatment. In this study, Shewanella oneidensis MR-1, a typical ferric reducing electroactive microorganism, was utilized as the raw material of biochar (BC) to prepare a novel green catalyst (MBC). The effect of MBC on activating persulfate (PS) to degrade rhodamine B (RhB) was evaluated. Experimental results showed that MBC could effectively activate PS to degrade RhB to reach 91.70% within 270 min, which was 47.4% higher than that of pure strain MR-1. The increasing dosage of PS and MBC could improve the removal of RhB. Meanwhile, MBC/PS can well perform in a wide pH range, and MBC showed good stability, achieving 72.07% removal of RhB with MBC/PS after 5 cycles. Furthermore, the free radical quenching test and EPR experiments confirmed the presence of both free radical and non-free radical mechanisms in the MBC/PS system, with •OH, SO4•- and 1O2 contributing to the effective degradation of RhB. This study successfully provided a new application for bacteria to be used in the biochar field.

A review on simultaneous heavy metal removal and organo-contaminants degradation by potential microbes: Current findings and future outlook

Industrial processes result in the production of heavy metals, dyes, pesticides, polyaromatic hydrocarbons (PAHs), pharmaceuticals, micropollutants, and PFAS (per- and polyfluorinated substances). Heavy metals are currently a significant problem in drinking water and other natural water bodies, including soil, which has an adverse impact on the environment as a whole. The heavy metal is highly poisonous, carcinogenic, mutagenic, and teratogenic to humans as well as other animals. Multiple polluted sites, including terrestrial and aquatic ecosystems, have been observed to co-occur with heavy metals and organo-pollutants. Pesticides and heavy metals can be degraded and removed concurrently from various metals and pesticide-contaminated matrixes due to microbial processes that include a variety of bacteria, both aerobic and anaerobic, as well as fungi. Numerous studies have examined the removal of heavy metals and organic-pollutants from different types of systems, but none of them have addressed the removal of these co-occurring heavy metals and organic pollutants and the use of microbes to do so. Therefore, the main focus of this review is on the recent developments in the concurrent microbial degradation of organo-pollutants and heavy metal removal. The limitations related to the simultaneous removal and degradation of heavy metals and organo-pollutant pollutants have also been taken into account.

Photocatalytic degradation of organic dyes on magnetically separable barium hexaferrite as photocatalyst under conditions of visible light irradiation

In this paper, we present the first attempt to evaluate the role of carboxymethyl cellulose (CMC) as a chelating agent in the sol-gel auto-combustion method of producing barium hexaferrite (BaFe₁₂O₁₉). We also report the application of the system as a photocatalyst for dye degradation. The formation, morphology, and crystalline structure of the synthesized nanoparticles are determined using XRD, SEM, EDS, VSM, FTIR, and TEM techniques. High efficiency under visible light, with a band gap of 1.62 eV and a BET surface of 17.93 m²/g, has been observed for the BaFe₁₂O₁₉ catalyst. The operating parameters, such as reaction time, initial dye concentration, light intensity, reusability, and dye type, are studied. Degradation rates as high as 98.26% (K_app = 0.082 min^-1) and 89.07% (K_app = 0.0743 min^-1) were obtained for cases of methylene blue and malachite green under conditions of visible light irradiations when BaFe₁₂O₁₉ was used. The BaFe₁₂O₁₉ catalyst has been shown to exhibit a high degradation performance for cationic dyes. Furthermore, BaFe₁₂O₁₉ magnetic nanoparticles show excellent reusability for dye degradation because the photocatalyst did not exhibit a significant decrease in its activity even after five runs (81.56%). As a result, the current study confirmed that photocatalytic degradation was a promising technology for saving water and treating wastewater formed from textile dye industries. The technique can be used to study the efficiency of photocatalytic degradation and understand the process of recycling waste effluents under conditions of minimized water use.

Biodegradation of textile dye Rhodamine-B by Brevundimonas diminuta and screening of their breakdown metabolites

The carcinogenic Rhodamine-B dye is recalcitrant which could cause serious hazards to human beings. Degradation with the application of unique bacterial strain is a sustainable technique. The bioremediation technique showed great potential to degrade a variety of recalcitrant pollutants like dyes. In this study, Brevundimonas diminuta, was selected for the breakdown of toxic textile dye Rhodamine-B. This bacterium showed 90-95% of degradation at the optimum conditions like 10 mg L^-1 of concentration of dye, pH 7 and temperature of 30 °C. Further UV-Visible spectrophotometry, FT-IR spectral scan, GC-MS analysis depicted the breakdown products like Methyl 18-fluoro-octadec-9-enoate, Methyl 18-fluoro-octadec-9-enoate and d-Homo-24-nor-17-oxachola-20,22-diene-3,16-dione,7-(acetyloxy)-1, 23 tri-epoxy-4,4,8-trimethyl. The degradation was confirmed by the changes in the functional groups, change in molecular weight and charge to-mass ratio. These results suggested that this strain is a deserving organism for the degradation of dye compounds.

Microbial degradation and transformation of benzo[a]pyrene by using a white-rot fungus Pleurotus eryngii F032

Polycyclic aromatic hydrocarbons (PAHs) are environmentally recalcitrant contaminants formed from naturally or incomplete combustion of organic materials and some of them are difficult to degrade due to their hydrophobicity and persistency. Benzo [a]pyrene (BaP), is one of PAHs that having five fused benzene and reported as mutagenic, carcinogenic and teratogenic compounds. Biodegradation is one of promising techniques due to its relatively low economic cost and microorganism is a natural capacity to consume hydrocarbons. In this investigation, Pleurotus eryngii F032 was grown in 20 mL of modified mineral salt broth (MSB) supplemented with BaP under static and agitated culture. Within 20 days, static culture removed 59% of BaP, whereas agitated culture removed the highest amount (73%). To expedite BaP elimination, the mechanism and behavior of BaP biosorption and biotransformation by Pleurotus eryngii F032 were additionally examined by gas chromatography-mass spectrometer (GC-MS). The optimal conditions for P. eryngii F032 to eliminate BaP were 25 °C, a C/N ratio of 8, pH 3 and 0.2% inoculum concentration. At an initial BaP content of 10 mg/L, more than 50% was effectively eliminated within 20 days under these conditions. Salinity, glucose, and rhamnolipids were the most important factors impacting BaP biodegradation. GC-MS found degradation products such as BaP-3,6-quinone, indicating plausible metabolic routes. Finally, it may be assumed that the primary mechanism by which white-rot fungi eliminate BaP is by the utilization of biotransformation enzymes such as laccase to mineralize the PAHs. Hence, Pleurotus eryngii F032 could be an ideal candidate to treat PAHs contaminated soils.

Removal of dye pollution by an oxidase derived from mutagenesis of the Deuteromycete Myrothecium with high potential in industrial applications

It is estimated that over 700,000 tons of synthetic dyes are produced annually, 15% of which are emitted as effluents. These highly stable dyes enter the world water ecosystems and stay in the environment, and eventually cause adverse impacts to the environment. Current wastewater treatment methods, such as filtration, coagulation, and chemical oxidation, have sideeffects, including toxic residue formation, membrane fouling, bioaccumulation, and secondary pollutant formation. Given the issues mentioned, it is necessary to study how to improve the degradation of synthetic dye with a cost-effective and ecofriendly approach. Natural oxidation provides a greener option. Recently, Deuteromycetes fungus Myrothecium verrucaria G-1 (M. verrucaria G-1) has shown great potential in producing high level of dye oxidase. This study aims to generate a dye oxidase hyperproducer, 3H6 from M. verrucaria G-1 by using atmospheric and room temperature plasma (ARTP) coupled with ultraviolet (UV) irradiation. This method increases oxidase production by nearly 106.15%. After a simple precipitation and dialysis, this mutant oxidase increases by 1.97-fold in a specific activity with dye degradation rates at 70% for Mmethylene blue (MB) and 85% for Congo red (CR). It is found that the genetic stability of 3H6 remains active for ten generations. The size of oxidase is 65 kDa, and optimum temperature for reaction is 30 °C with 4.5 pH. This study presents that the first combined mutagenesis approach by ARPT-UV on fungus species generates an impressive increment of acid dye oxidases production. As such, this method presents a cost-effective alternative to mitigate hazardous dye pollution.

Green Biosynthesis of Tin Oxide Nanomaterials Mediated by Agro-Waste Cotton Boll Peel Extracts for the Remediation of Environmental Pollutant Dyes

The sustainable synthesis of metal oxide materials provides an ecofriendly and more exciting approach in the domain of a clean environment. Besides, plant extracts to synthesize nanoparticles have been considered one of the more superior ecofriendly methods. This paper describes the biosynthetic preparation route of three different sizes of tetragonal structure SnO₂ nanoparticles (SNPs) from the agro-waste cotton boll peel aqueous extract at 200, 500, and 800 °C for 3 h and represents a low-cost and alternative preparation method. The samples were characterized by X-ray diffraction, Fourier transform infrared spectrophotometry, ultraviolet-visible absorption spectroscopy, high-resolution transmission electron microscopy (HR-TEM), and energy-dispersive X-ray spectroscopy. Surface area and porosity size distribution were identified by nitrogen adsorption-desorption isotherms and Brunauer-Emmett-Teller analysis. The photocatalytic properties of the SNP samples were studied against methylene blue (MB) and methyl orange (MO), and the degradation was evaluated with three different size nanomaterials of 3.97, 8.48, and 13.43 nm. Photocatalytic activities were carried out under a multilamp (125 W Hg lamps) photoreactor. The smallest size sample exhibited the highest MB degradation efficiency within 30 min than the most significant size sample, which lasted 80 min. Similarly, in the case of MO, the smallest sample showed a more superior degradation efficiency with a shorter period (40 min) than the large-size samples (100 min). Therefore, our studies suggested that the developed SNP nanomaterials could be potential, promising photocatalysts against the degradation of industrial effluents.