Nanocrystalline cellulose (NCC): A renewable nano-material for polyvinyl acetate (PVA) adhesive

Nanotechnology in wood science: Innovations and applications

Application of nanomaterials is gaining tremendous interest in the field of wood science and technology for value addition and enhancing performance of wood and wood-based composites. This review focuses on the use of nanomaterials in improving the properties of wood and wood-based materials and protecting them from weathering, biodegradation, and other deteriorating agents. UV-resistant, self-cleaning (superhydrophobic) surfaces with anti-microbial properties have been developed using the extraordinary features of nanomaterials. Scratch-resistant nano-coatings also improve durability and aesthetic appeal of wood. Moreover, nanomaterials have been used as wood preservatives for increasing the resistance against wood deteriorating agents such as fungi, termites and borers. Wood can be made more resistant to ignition and slower to burn by introducing nano-clays or nanoparticles of metal-oxides. The use of nanocellulose and lignin nanoparticles in wood-based products has attracted huge interest in developing novel materials with improved properties. Nanocellulose and lignin nanoparticles derived/synthesized from woody biomass can enhance the mechanical properties such as strength and stiffness and impart additional functionalities to wood-based products. Cellulose nano-fibres/crystals find application in wide areas of materials science like reinforcement for composites. Incorporation of nanomaterials in resin has been used to enhance specific properties of wood-based composites. This review paper highlights some of the advancements in the use of nanotechnology in wood science, and its potential impact on the industry.

Custom-designed polyphenol lignin for the enhancement of poly(vinyl alcohol)-based wood adhesive

Adhesives are used extensively in the wood industry. As resource and environmental issues become increasingly severe, the development of green and sustainable biomass-based adhesives has attracted increasing attention. In this work, a green wood adhesive is developed from poly(vinyl alcohol) and lignin with molecular designs of lignin extending beyond those in nature. The lignin undergoes extraction from corncob residue, aldehydration, and phenolisation (phenol, resorcinol, and catechol) to significantly increase the phenolic hydroxyl groups (over 7.92 mmol/g), which has the effect of enhancing the hydrogen bonding force between the adhesive and the wood, thereby greatly improving adhesive performance. Compared with pure PVA, polyphenol lignin-containing PVA showed improved adhesion strength and hydrophobicity. PVA/resorcinol-lignin has the significantly improved wood lap shear strength (6.27 MPa, 77.6 % improvement) and hydrophobicity (almost 100 % increase in wet shear strength). This research not only provides a green and high-performance alternative raw material for wood adhesives but also broadens the path for large-scale application of biomass.

A flavonol-labelled cellulose fluorescent probe combined with composite fluorescent film imaging and smartphone technology for the detection of Fe3

Fe3+ is one of the most widely distributed and abundant elements on earth. Realizing efficient and real-time monitoring of Fe3+ is of great significance for the natural environment and the health of living organisms. In this paper, a flavonol-labelled cellulose-based fluorescent probe (ACHM) was synthesized by using dialdehyde cellulose (DAC) as the backbone and combining with flavonol derivatives (AHM - 1). The mechanism of recognizing Fe3+ was verified by characterizing the structure of ACHM by NMR, HRMS (High Resolution Mass Spectrometry), FTIR (Fourier Transform Infrared Spectroscopy), XRD (X-ray Diffraction), TG (Thermogravimetry) and SEM (Scanning Electron Microscopy). The H2O solution of the probe ACHM showed good fluorescence properties. It has quenching fluorescence properties for Fe3+, with a low limit of detection (LOD) of 0.10 μM and a fast response time of only 20 s. In addition, in order to expand the application range of the probe, ACHM was prepared as a fluorescent composite film with an average tensile strength of 32.9 MPa and an average elongation at break of 3.39 %. It shows its superiority in mechanical properties. The probe also demonstrated its practical application value for detecting Fe3+ in smartphone imaging applications.

Synthesis and Characterization of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites

The pursuit of an environmentally sustainable manufacturing process requires the substitution of less damaging and recyclable solutions for harmful reagents. This study aims to assess the effectiveness of using cellulose microfibrils synthesized via different hydrolysis reactions as reinforcing agents in polyvinyl alcohol (PVA) at varying concentrations. The investigation explores the morphology, thermal properties, and chemical behavior of the cellulose particles. The cellulose microfibrils (CMFs) produced using citric acid exhibited the highest yield and aspect ratio. Notably, particles from organic acids demonstrated greater thermal stability, with oxalic acid-derived particles displaying the maximum thermal degradation temperature. Subsequently, cast films of PVA reinforced with the cellulose microfibrils underwent comprehensive analyses, including Fourier transfer infrared (FTIR) spectroscopy, thermal degradation temperature (Td), differential scanning calorimetry (DSC), and tensile strength tests. The thermal behavior of cast films experienced notable changes with the addition of cellulose particles, evidenced by increased melting and crystallinity temperatures, along with a rise in the degree of crystallinity. The incorporation of cellulose particles led to a substantial improvement in mechanical properties. Films containing CMF displayed higher Young's modulus, and the sample incorporating 5% CMF derived from citric acid exhibited the most significant increase in modulus.

Development of eco-friendly antifungal and antibacterial adhesive derived from modified cassava starch waste/polyvinyl alcohol containing green synthesized nano-silver

Environmentally friendly biopolymer-based wood adhesives are an inevitable trend of wood product development to replace the use of harmful formaldehyde-based adhesives. In this research, a new eco-friendly modified cassava starch waste-based adhesive via carboxymethylation (CMS), and blending with polyvinyl alcohol (PVA), tannic acid (TA) and green synthesized silver nanoparticles (AgNPs) was prepared. The effects of TA content on green synthesis of AgNPs (Ag-TA) and bio-adhesive nanocomposite properties were investigated. The use of 5 wt% TA for AgNPs synthesis (Ag-TA-5) resulted in a uniform particle size distribution. The plywood prepared with Ag-TA-5 provided the highest dry and wet shear strength at 1.95 ± 0.11 MPa and 1.38 ± 0.3 MPa, respectively. The water absorption and thickness swelling of this plywood remarkably decreased up to 10.99% and 6.79%, respectively. More importantly, the presence of Ag-TA in CMS/PVA adhesive successfully inhibited the invasion of mold and bacteria. Based on the cyclic delamination test, the adhesive bond durability of bio-adhesive containing Ag-TA-5 could meet the requirement of the AITC Test T110-2007 and was comparable to commercial adhesives. The added advantage of the prepared bio-adhesive was its synthesis from agro-waste products and possible economically viable production at industrial level.

Effect of polyvinyl acetate (PVAc) based coating on quality characteristics of capsicum during storage

The effect of PVAc (Polyvinyl acetate) coating on various characteristics of capsicum was determined during postharvest storage at room temperature (30 ± 1 °C) and refrigeration temperature (10 ± 1 °C). Food grade PVAc was used to make different coating formulations (2.5, 5, 7.5, 10 and 12.5%) by dissolving alcohol-water mixtures. After coating, the samples were stored at room temperature (30 ± 1 °C) and refrigeration temperature (10 ± 1 °C) for a comparative study. Various physicochemical parameters viz. weight loss, TSS, acidity, chlorophyll, pH, ascorbic acid, and color were analyzed every three days of storage till spoilage. Results revealed that the physicochemical characteristics and the quality of the bell peppers were improved by coating treatments at both the storage conditions. PVAc concentrations of 10 and 12.5% performed better than other PVAc coatings in retaining the chlorophyll and water content, which ultimately increased the shelf life of capsicum without significantly affecting its green color. The coating reduced the weight loss and color change, maintained total soluble solids, titratable acidity, pH over the storage period. About 40-50% less weight loss was observed in case of higher PVAc coating concentrations (10 and 12%). Therefore, the present study results suggested that PVAc coating can maintain postharvest storage quality of capsicum at 30 ± 1 °C and 10 ± 1 °C storage conditions.

Graphical abstract

A rapid synthesis of nanofibrillar cellulose/polystyrene composite via ultrasonic treatment

A new method of the synthesis of nanofibrillar cellulose/polystyrene composite based on ultrasonic treatment of styrene emulsion in cellulose-water solution was elaborated. A new approach does not require additional heating and proposes a significantly faster synthesis (15 min, 45 °C) of the target composite compared to the methods described previously. A comprehensive analysis did not reveal any significant differences between mechanical, physical and biodegradable properties of the composite obtained by ultrasonic method and that one obtained by conventional thermal method, which requires much higher temperature (above 75 °C) and reaction duration (from 3 h).

Recent Advances in Membrane-Based Biogas and Biohydrogen Upgrading

Biogas and biohydrogen, due to their renewable nature and zero carbon footprint, are considered two of the gaseous biofuels that will replace conventional fossil fuels. Biogas from anaerobic digestion must be purified and converted into high-quality biomethane prior to use as a vehicle fuel or injection into natural gas networks. Likewise, the enrichment of biohydrogen from dark fermentation requires the removal of CO2, which is the main pollutant of this new gaseous biofuel. Currently, the removal of CO2 from both biogas and biohydrogen is carried out by means of physical/chemical technologies, which exhibit high operating costs and corrosion problems. Biological technologies for CO2 removal from biogas, such as photosynthetic enrichment and hydrogenotrophic enrichment, are still in an experimental development phase. In this context, membrane separation has emerged as the only physical/chemical technology with the potential to improve the performance of CO2 separation from both biogas and biohydrogen, and to reduce investment and operating costs, as a result of the recent advances in the field of nanotechnology and materials science. This review will focus on the fundamentals, potential and limitations of CO2 and H2 membrane separation technologies. The latest advances on membrane materials for biogas and biohydrogen purification will be systematically reviewed.

Stretchable and Self-Adhesive PEDOT:PSS Blend with High Sweat Tolerance as Conformal Biopotential Dry Electrodes

Dry epidermal electrodes that can always form conformal contact with skin can be used for continuous long-term biopotential monitoring, which can provide vital information for disease diagnosis and rehabilitation. But, this application has been limited by the poor contact of dry electrodes on wet skin. Herein, we report a biocompatible fully organic dry electrode that can form conformal contact with both dry and wet skin even during physical movement. The dry electrodes are prepared by drop casting an aqueous solution consisting of poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS), poly(vinyl alcohol) (PVA), tannic acid (TA), and ethylene glycol (EG). The electrodes can exhibit a conductivity of 122 S cm^-1 and a mechanical stretchability of 54%. Moreover, they are self-adhesive to not only dry skin but also wet skin. As a result, they can exhibit a lower contact impedance to skin than commercial Ag/AgCl gel electrodes on both dry and sweat skins. They can be used as dry epidermal electrodes to accurately detect biopotential signals including electrocardiogram (ECG) and electromyogram (EMG) on both dry and wet skins for the users at rest or during physical movement. This is the first time to demonstrate dry epidermal electrodes self-adhesive to wet skin for accurate biopotential detection.

Nanocellulose in Heterogeneous Water-Based Polymerization for Wood Adhesives

The interest in the development of biobased adhesives has increased due to environmental concerns. Moreover, as the production of engineered wood products (EWPs) is expected to grow, the wood adhesives market needs to transit toward formaldehyde-free products. Cellulose nanoparticles (CNPs) are a material with unique properties and advantages for producing hybrid materials as biobased wood adhesives. Besides their traditional use as reinforcing additives, CNPs can be incorporated at the beginning of the polymerization reaction to form in situ polymerized hybrid adhesives with better mechanical and physicochemical properties than the neat adhesive. Despite their outstanding characteristics, CNPs are still an emerging nanomaterial in the wood adhesive field, and the studies are incipient. This review explores the utilization of CNPs in heterogeneous polymerization for the production of polyvinyl acetate, polymeric isocyanates, waterborne polyurethane systems, and other waterborne polymer latexes. The main challenges are discussed, and some recommendations are set down for the manufacture of these novel hybrid nanocomposites.

Best Practices for Quasistatic Berkovich Nanoindentation of Wood Cell Walls

For wood and forest products to reach their full potential as structural materials, experimental techniques are needed to measure mechanical properties across all length scales. Nanoindentation is uniquely suited to probe in situ mechanical properties of micrometer-scale features in forest products, such as individual wood cell wall layers and adhesive bondlines. However, wood science researchers most commonly employ traditional nanoindentation methods that were originally developed for testing hard, inorganic materials, such as metals and ceramics. These traditional methods assume that the tested specimen is rigidly supported, homogeneous, and semi-infinite. Large systematic errors may affect the results when these traditional methods are used to test complex polymeric materials, such as wood cell walls. Wood cell walls have a small, finite size, and nanoindentations can be affected by nearby edges. Wood cell walls are also not rigidly supported, and the cellular structure can flex under loading. Additionally, wood cell walls are softer and more prone to surface detection errors than harder inorganic materials. In this paper, nanoindentation methods for performing quasistatic Berkovich nanoindentations, the most commonly applied nanoindentation technique in forest products research, are presented specifically for making more accurate nanoindentation measurements in materials such as wood cell walls. The improved protocols employ multiload nanoindentations and an analysis algorithm to correct and detect errors associated with surface detection errors and structural compliances arising from edges and specimen-scale flexing. The algorithm also diagnoses other potential issues arising from dirty probes, nanoindenter performance or calibration issues, and displacement drift. The efficacy of the methods was demonstrated using nanoindentations in loblolly pine (Pinus taeda) S2 cell wall layers (S2) and compound corner middle lamellae (CCML). The nanoindentations spanned a large range of sizes. The results also provide new guidelines about the minimum size of nanoindentations needed to make reliable nanoindentation measurements in S2 and CCML.

Investigation of the structural and physical properties, antioxidant and antimicrobial activity of konjac glucomannan/cellulose nanocrystal bionanocomposite films incorporated with phlorotannin from Sargassum

In this study, environmentally friendly bionanocomposite films were prepared by incorporating phlorotannins from Sargassum (PS) into konjac glucomannan (KGM)/cotton cellulose nanocrystals (CNC) composites. The effects of different concentrations of PS (5%, 9%, 13%, and 17%, w/w) on the microstructure, physical properties, antioxidant and antibacterial activities of the resultant bionanocomposite films were evaluated. The results of scanning electron microscopy, X-ray diffraction, and Fourier-transform infrared spectra showed that PS was well compatible with the KGM/CNC composites matrix, which led to form a compact and uniform structure of the films. Thermogravimetric analysis and differential scanning calorimetry demonstrated that incorporating PS improved the heat stability of KGM/CNC bionanocomposite films. And addition of the appropriate amount of PS improved the mechanical and water-vapor barrier-related properties of the bionanocomposite film. For instance, with 9% PS, the tensile strength of the KGM/CNC/PS bionanocomposite film increased by 33.9%, and the water-vapor transmittance decreased by 41.67% compared to that of the KGM/CNC films. Moreover, the addition of PS endowed the KGM/CNC film with excellent antioxidant and antibacterial properties. Therefore, KGM/CNC/PS bionanocomposite films have great potential to be applicated as active packaging in the food packaging industry.

Production and Surface Modification of Cellulose Bioproducts

Petroleum-based synthetic plastics play an important role in our life. As the detrimental health and environmental effects of synthetic plastics continue to increase, the renewable, degradable and recyclable properties of cellulose make subsequent products the "preferred environmentally friendly" alternatives, with a small carbon footprint. Despite the fact that the bioplastic industry is growing rapidly with many innovative discoveries, cellulose-based bioproducts in their natural state face challenges in replacing synthetic plastics. These challenges include scalability issues, high cost of production, and most importantly, limited functionality of cellulosic materials. However, in order for cellulosic materials to be able to compete with synthetic plastics, they must possess properties adequate for the end use and meet performance expectations. In this regard, surface modification of pre-made cellulosic materials preserves the chemical profile of cellulose, its mechanical properties, and biodegradability, while diversifying its possible applications. The review covers numerous techniques for surface functionalization of materials prepared from cellulose such as plasma treatment, surface grafting (including RDRP methods), and chemical vapor and atomic layer deposition techniques. The review also highlights purposeful development of new cellulosic architectures and their utilization, with a specific focus on cellulosic hydrogels, aerogels, beads, membranes, and nanomaterials. The judicious choice of material architecture combined with a specific surface functionalization method will allow us to take full advantage of the polymer's biocompatibility and biodegradability and improve existing and target novel applications of cellulose, such as proteins and antibodies immobilization, enantiomers separation, and composites preparation.

Direct conversion of raw wood to TEMPO-oxidized cellulose nanofibers

A direct production route of cellulose nanofibers (TOCN-D) from raw wood particles of paulownia using simultaneous bleaching and TEMPO oxidation process was specifically investigated and introduced. For comparison, we prepared cellulose nanofibers (TOCN-C) through a common route of TEMPO oxidation of cellulose fibers, and cellulose nanofibers with disk grinding (GCNF). FE-SEM analysis showed that the average diameter of TOCN-D (5 ± 3 nm) was similar to that of TOCN-C (6 ± 3 nm). XRD results confirmed that the crystal properties of TOCN-D and that of TOCN-C were almost the same. TOCN-D and TOCN-C showed similar chemical, thermal and optical properties in FTIR, TGA and transparency tests, respectively. The nanopaper made from TOCN-D showed high Young's modulus (13.8 GPa) and tensile strength (233 MPa), which were similar to those of TOCN-C nanopaper. Owing the aforementioned similarities, it is concluded that the TOCN-D produced through direct route is a technically, environmental-friendly and economically valuable product.

Cationically Modified Nanocrystalline Cellulose/Carboxyl-Functionalized Graphene Quantum Dots Nanocomposite Thin Film: Characterization and Potential Sensing Application

In this study, highly functional cationically modified nanocrystalline cellulose (NCC)/carboxyl-functionalized graphene quantum dots (CGQD) has been described. The surface of NCC was first modified with hexadecyltrimethylammonium bromide (CTA) before combining with CGQD. The CGQD, CTA-NCC and CTA-NCC/CGQD nanocomposites thin films were prepared using spin coating technique. The obtained nanocomposite thin films were then characterized by using the Fourier transform infrared spectroscopy (FTIR) which confirmed the existence of hydroxyl groups, carboxyl groups and alkyl groups in CTA-NCC/CGQD. The optical properties of the thin films were characterized using UV–Vis spectroscopy. The absorption of CTA-NCC/CGQD was high with an optical band gap of 4.127 eV. On the other hand, the CTA-NCC/CGQD nanocomposite thin film showed positive responses towards glucose solution of different concentration using an optical method based on surface plasmon resonance phenomenon. This work suggests that the novel nanocomposite thin film has potential for a sensing application in glucose detection.

Nanocellulose: From Fundamentals to Advanced Applications

Over the past few years, nanocellulose (NC), cellulose in the form of nanostructures, has been proved to be one of the most prominent green materials of modern times. NC materials have gained growing interests owing to their attractive and excellent characteristics such as abundance, high aspect ratio, better mechanical properties, renewability, and biocompatibility. The abundant hydroxyl functional groups allow a wide range of functionalizations via chemical reactions, leading to developing various materials with tunable features. In this review, recent advances in the preparation, modification, and emerging application of nanocellulose, especially cellulose nanocrystals (CNCs), are described and discussed based on the analysis of the latest investigations (particularly for the reports of the past 3 years). We start with a concise background of cellulose, its structural organization as well as the nomenclature of cellulose nanomaterials for beginners in this field. Then, different experimental procedures for the production of nanocelluloses, their properties, and functionalization approaches were elaborated. Furthermore, a number of recent and emerging uses of nanocellulose in nanocomposites, Pickering emulsifiers, wood adhesives, wastewater treatment, as well as in new evolving biomedical applications are presented. Finally, the challenges and opportunities of NC-based emerging materials are discussed.

A Biorefinery Strategy That Introduces Hydrothermal Treatment Prior to Acid Hydrolysis for Co-generation of Furfural and Cellulose Nanocrystals

Hydrothermal treatment of wood pulp at 150-225°C prior to acid hydrolysis was investigated in the context of isolating cellulose nanocrystals (CNCs). The objective was 2-folds as follows: (a) generating furfural as a value-added co-product; and (b) concentrating and forming new CNC precursors through thermal re-orientation of para-crystalline cellulose chains that will in turn improve CNC recovery and yield. Furfural yields up to 19 and 21% xylan conversion were obtained at 200 and 225°C hydrothermal treatments, respectively. In addition, these hydrothermal treatment conditions increased the crystallinity index of the pulp (77%) to 84 and 80%, respectively. Consequently, the CNC yield from hydrothermally treated wood pulp, when compared to untreated wood pulp, improved by up to 4- and 2-folds, respectively. An efficient acid hydrolysis process with yield improvements can translate to reduced CNC isolation and purification costs and increased production capacity. The qualities of the CNCs in terms of particle size and crystallinity were not affected due to hydrothermal treatment. However, the zeta potential, sulfur, hydrogen, and oxygen content of the CNCs were significantly lower at 225°C while carbon composition increased, and dark brown coloration was observed that indicates caramelization. This study demonstrates for the first time a novel biorefinery strategy that introduces hydrothermal treatment prior to acid hydrolysis to co-generate furfural and CNC with improved efficiency.

Transepithelial Transport Characteristics of the Cholesterol- Lowing Soybean Peptide, WGAPSL, in Caco-2 Cell Monolayers

Recent studies have shown that soybean protein and its peptides have cholesterol-lowering activities. However, it is not clear whether these peptides could overcome physiological barriers, such as phase II metabolism in gastrointestinal tract and poor permeability, to reach the blood stream in its intact form. Therefore, the transepithelial transport characteristics of soybean peptide Trp-Gly-Ala-Pro-Ser-Leu (WGAPSL) with cholesterol- lowering activity were investigated in Caco-2 cells. In this study; the transepithelial absorption of WGAPSL was studied using human intestinal Caco-2 cell monolayers. The results showed that WGAPSL had good stability (83.9% ±1.98%) after simulated gastric and intestinal digestion. During the apical (AP) side to basolateral (BL) side transport, WGAPSL was absorbed intact through Caco-2 cell monolayers with apparent permeability coefficient (Papp) values of 4.4 × 10-8 to 1.2 × 10-8 cm/s. Cytochalasin D loosened the tight junctions of Caco-2 cell monolayers and significantly (p < 0.05) improved the transport process. Sodium azide, wortmannin, and Gly-Pro had minimal effects on transport, demonstrating that the major transport route of WGAPVL was paracellular via tight junctions. Finally, LC-MS analysis showed that Gly-Ala-Pro (GAP) was the important part for the intact absorption of WGAPVL and Trp (W) was the most unstable amino acid residue.

A review on versatile applications of blends and composites of CNC with natural and synthetic polymers with mathematical modeling

Cellulose is world's most abundant, renewable and recyclable polysaccharide on earth. Cellulose is composed of both amorphous and crystalline regions. Cellulose nanocrystals (CNCs) are extracted from crystalline region of cellulose. The most attractive feature of CNC is that it can be used as nanofiller to reinforce several synthetic and natural polymers. In this article, a comprehensive overview of modification of several natural and synthetic polymers using CNCs as reinforcer in respective polymer matrix is given. The immense activities of CNCs are successfully utilized to enhance the mechanical properties and to broaden the field of application of respective polymer. All the technical scientific issues have been discussed highlighting the recent advancement in biomedical and packaging field.

Synthesis of cellulose nanocrystal armored latex particles for mechanically strong nanocomposite films

Mechanically strong films are generated from cellulose nanocrystal armored latex particles synthesized by emulsion polymerization.

Strong, Rebondable, Dynamic Cross-Linked Cellulose Nanocrystal Polymer Nanocomposite Adhesives

A series of strong, rebondable polydisulfide nanocomposite adhesive films have been prepared via the oxidation of a thiol-endcapped semicrystalline oligomer with varying amounts of thiol-functionalized cellulose nanocrystals (CNC-SH). The nanocomposites are designed to have two temperature-sensitive components: (1) the melting of the semicrystalline phase at ca. 70 °C and (2) the inherent dynamic behavior of the disulfide bonds at ca. 150 °C. The utility of these adhesives was demonstrated on different bonding substrates (hydrophilic glass slides and metal), and their bonding at both 80 and 150 °C was examined. In all cases, stronger bonding was achieved at temperatures where the disulfide bonds are dynamic. For high surface energy substrates, such as hydrophilic glass or metal, the adhesive shear strength increases with CNC-SH content, with the 30 wt % CNC-SH composites exhibiting adhesive shear strengths of 50 and 23 MPa for hydrophilic glass and metal, respectively. The effects of contact pressure and time of bonding were also investigated. It was found that ca. 20-30 min bonding time was required to reach maximum adhesion, with adhesives containing higher wt % CNCs requiring longer bonding times. Furthermore, it was found that, in general, an increase in contact pressure results in an increase in the shear strength of the adhesive. The rebonding of the adhesives was demonstrated with little-to-no loss in adhesive shear strength. In addition, the 30 wt % nanocomposite adhesive was compared to some common commercially available adhesives and showed significantly stronger shear strengths when bonded to metal.

Facile synthesis of branched polyvinyl acetate via redox-initiated radical polymerization

Although branched polymers find widespread applications, the rational design and synthesis of branched vinyl polymers via the conventional radical (co)polymerization of commercially available monomers is still a challenge for researchers in this field.

Surface modification of cellulose nanocrystals with different acid anhydrides for improved dispersion in poly(butylene succinate)

Hydrophilic cellulose nanocrystals (CNC) are typically poorly dispersed in non-polar polymer matrices and, hence, a method for the surface modification of CNC is developed for improving this dispersion. This method included an esterification reaction with acetic anhydride, butyric anhydride, and caproic anhydride. The particle size distribution (range of sizes: 80–310 nm) of CNC was determined. The SEM-EDAX indicated that (i) the structure of CNC was maintained even after incorporation of the acid anhydride and (ii) the carbon C content of modified-CNC was higher than that of pure CNC. The chemical structure of modified-CNC was identified via FT-IR and ¹³C NMR spectroscopy. The contact angle of CNC and modified-CNC with water and methylene iodide was measured. The surface energy of modified-CNC was lower than that of pure CNC. Thermal-property measurements indicated that the initial decomposition temperature (based on 5 wt%) of the modified-CNC was slightly higher than that of CNC. Poly(butylene succinate) (PBS) composites were obtained by mixing modified-CNC into a PBS matrix via simple melt blending of a double screw. The PBS/modified-CNC composites were investigated via DSC and XRD. Tensile testing indicated that the tensile modulus improved gradually with increasing modified-CNC content, whereas the elongation at fracture decreased.

The hydrophobic CNC was dispersed in PBS to become a high dispersity and mechanical property and thermal stability PBS/modified-CNC composite.

Graphite Oxide Improves Adhesion and Water Resistance of Canola Protein-Graphite Oxide Hybrid Adhesive

Protein derived adhesives are extensively explored as a replacement for synthetic ones, but suffers from weak adhesion and water resistance. Graphite oxide (GO) has been extensively used in nanocomposites, but not in adhesives applications. The objectives of this study were to prepare functionally improved protein adhesive by exfoliating GO with different oxidation levels, and to determine the effect of GO on adhesion mechanism. GO were prepared by oxidizing graphite for 0.5, 2, and 4 h (GO-A, GO-B and GO-C, respectively). Increasing oxidation time decreased C/O ratio; while the relative proportion of C-OH, and C = O groups initially increased up to 2 h of oxidation, but reduced upon further oxidation. Canola protein-GO hybrid adhesive (CPA-GO) was prepared by exfoliating GO at a level of 1% (w/w). GO significantly increased (p < 0.05) adhesion; where GO-B addition showed the highest dry, and wet strength of 11.67 ± 1.00, and 4.85 ± 0.61 MPa, respectively. The improvements in adhesion was due to the improved exfoliation of GO, improved adhesive and cohesive interactions, increased hydrogen bonding, increased hydrophobic interactions and thermal stability of CPA-GO. GO, as we proposed for the first time is easier to process and cost-effective in preparing protein-based adhesives with significantly improved functionalities.

2D Ti3C2Tx (MXene)-reinforced polyvinyl alcohol (PVA) nanofibers with enhanced mechanical and electrical properties

Novel 2D Ti3C2Tx (MXene)-reinforced polyvinyl alcohol (PVA) nanofibers have been successfully fabricated by an electrospinning technique. The high aspect ratio, hydrophilic surfaces, and metallic conductivity of delaminated MXene nanosheet render it promising nanofiller for high performance nanocomposites. Cellulose nanocrystals (CNC) were used to improve the mechanical properties of the nanofibers. The obtained electrospun nanofibers had diameter from 174 to 194 nm depending on ratio between PVA, CNC and MXene. Dynamic mechanical analysis demonstrated an increase in the elastic modulus from 392 MPa for neat PVA fibers to 855 MPa for fibers containing CNC and MXene at 25°C. Moreover, PVA nanofibers containing 0.14 wt. % Ti3C2Tx exhibited dc conductivity of 0.8 mS/cm conductivity which is superior compared to similar composites prepared using methods other than electrospinning. Improved mechanical and electrical characteristics of the Ti3C2Tx /CNC/PVA composites make them viable materials for high performance energy applications.

A Study on Thermal and Nanomechanical Performance of Cellulose Nanomaterials (CNs)

Wood-based cellulose nanomaterials (CNs) (specifically, cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs)) are environmentally sourced low-impact materials with remarkable thermal, mechanical, and physical properties. This uniqueness makes them great candidates for creating nanocomposite materials with a wide range of attributes. Investigating the morphological, thermal, and nanomechanical properties of CNs becomes crucial to intelligent development of novel composite materials. An atomic force microscope equipped with a nanoindenter was used to investigate the compression modulus of CNFs and CNCs using two analytical approaches (denoted as Oliver Pharr (OP) and Fused Silica (FS)). The CNC modulus values (E_CNC-FS = 21.1 GPa, E_CNC-OP = 28.7 GPa) were statistically larger than those obtained from CNFs (E_CNF-FS = 12.4 GPa, E_CNF-OP = 15.1 GPa). Additionally, the FS analytical approach provided statistically significant lower estimates. Thermal stability of CNFs and CNCs was investigated using thermogravimetric analysis. Significant differences were found between CNF and CNC onset temperatures (Onset_CNC = 228.2 °C, Onset_CNF = 279.9 °C), decomposition temperatures (DTGA_CNC = 247.9 °C, DTGA_CNF = 331.4 °C), and residues (Residue_CNC = 34.4%, Residue_CNF = 22.8%). This research enriches the information on thermal stability and nanomechanical performance of cellulose nanomaterials, and provides increased knowledge on understanding the effect of CNs as a matrix or reinforce in composites.

Coaxial Electrospinning and Characterization of Core-Shell Structured Cellulose Nanocrystal Reinforced PMMA/PAN Composite Fibers

A modified coaxial electrospinning process was used to prepare composite nanofibrous mats from a poly(methyl methacrylate) (PMMA) solution with the addition of different cellulose nanocrystals (CNCs) as the sheath fluid and polyacrylonitrile (PAN) solution as the core fluid. This study investigated the conductivity of the as-spun solutions that increased significantly with increasing CNCs addition, which favors forming uniform fibers. This study discussed the effect of different CNCs addition on the morphology, thermal behavior, and the multilevel structure of the coaxial electrospun PMMA + CNCs/PAN composite nanofibers. A morphology analysis of the nanofibrous mats clearly demonstrated that the CNCs facilitated the production of the composite nanofibers with a core-shell structure. The diameter of the composite nanofibers decreased and the uniformity increased with increasing CNCs concentrations in the shell fluid. The composite nanofibrous mats had the maximum thermal decomposition temperature that was substantially higher than electrospun pure PMMA, PAN, as well as the core-shell PMMA/PAN nanocomposite. The BET (Brunauer, Emmett and Teller) formula results showed that the specific surface area of the CNCs reinforced core-shell composite significantly increased with increasing CNCs content. The specific surface area of the composite with 20% CNCs loading rose to 9.62 m²/g from 3.76 m²/g for the control. A dense porous structure was formed on the surface of the electrospun core-shell fibers.

Plasticizing and crosslinking effects of borate additives on the structure and properties of poly(vinyl acetate)

An unusual, pH-tuneable plasticizing effect of borate additives on the structure and properties of partially hydrolysed poly(vinyl acetate) is firstly reported, in addition to its general crosslinking effect.

Exfoliating nanomaterials in canola protein derived adhesive improves strength and water resistance

A new green wood adhesives was developed by exfoliating nanomaterials at low concentrations in canola protein.

Nano bio optically tunable composite nanocrystalline cellulose films

We utilize nanocellulose and semiconductor nanocrystals to reinforce and functionalize a biodegradable transparent film to create a transparent, strong and optically tunable plastic film.