Plasticization of poly(lactic acid) (PLA) through chemical grafting of poly(ethylene glycol) (PEG) via in situ reactive blending

Melt Compounding of Poly(lactic acid)-Based Composites: Blending Strategies, Process Conditions, and Mechanical Properties

Polylactic acid (PLA), derived from renewable resources, has the advantages of rigidity, thermoplasticity, biocompatibility, and biodegradability, and is widely used in many fields such as packaging, agriculture, and biomedicine. The excellent processability properties allow for melt processing treatments such as extrusion, injection molding, blow molding, and thermoforming in the preparation of PLA-based materials. However, the low toughness and poor thermal stability of PLA limit its practical applications. Compared with pure PLA, conditions such as processing technology, filler, and crystallinity affect the mechanical properties of PLA-based materials, including tensile strength, Young's modulus, and elongation at break. This review systematically summarizes various technical parameters for melt processing of PLA-based materials and further discusses the mechanical properties of PLA homopolymers, filler-reinforced PLA-based composites, PLA-based multiphase composites, and reactive composite strategies for PLA-based composites.

Porous poly (lactic acid)/poly (ethylene glycol) blending membrane for microorganisms encapsulation

ABSTRACTImmobilized microorganisms technology has been explored as a promising wastewater treatment method. To further increase the activity of the immobilized microorganisms, a porous membrane which was composed of poly (lactic acid) (PLA) and poly (ethylene glycol) (PEG) was designed for microorganism encapsulation. The plane membrane and the spherical membrane were prepared respectively. The morphology, mechanical properties, nitrate permeability, and biodegradability of the plane membranes were investigated to determine an optimized formulation. And then, denitrifying bacteria was encapsulated by the spherical membrane and its denitrification performance in synthetic wastewater was explored. The mean pore size of the PLA/PEG plane membranes ranged from 2.09 ± 0.63 μm to 3.15 ± 1.32 μm. PEG stimulated interconnected pore structure of the PLA/PEG plane membrane. Compare with neat PLA membrane, the tensile strength of the PLA/50%PEG plane membrane decreased by about 53.2% and elongation at break increased by about 103.5%. Nitrate permeability attained a maximum of 188.95 ± 4.59 mg·L-1·m-2·h-1 for PLA/50%PEG plane membrane. The denitrifying active sludge enclosed with the spherical membrane showed good denitrification performance in a short start-up time. The nitrate removal rate reached 51.14% on the 4th day and 82.53% on the 17th day. This porous PLA/50%PEG membrane was good for the diffusion of substrates and nutrients, which enabled the encapsulated microorganism recovered activity in a short time. The spraying method made the microorganism encapsulation could be designed according to the different microorganisms and different user environments, which expanded the application scope of microorganism encapsulation technology.

Biodegradable Hydrogenated Dimer Acid-Based Plasticizers for PLA with Excellent Plasticization, Thermal Stability and Gas Resistance

The use of vegetable oil-dervied plasticizers to enhance the flexibility of polylactic acid (PLA) has received much attention due to their renewability, inexpensiveness and biodegradation. However, the double bonds in vegetable oil-based plasticizers limit their compatibility with PLA, resulting in PLA-derived products with reduced flexibility. Herein, we examined soybean oil-derived hydrogenated dimer acid-based polyethylene glycol methyl ether esters (HDA-2n, 2n = 2, 4, 6 or 8, referring to the ethoxy units) developed via the direct esterification of saturated hydrogenated dimer acid and polyethylene glycol monomethyl ethers. The resulting HDA-2n was first used as a plasticizer for PLA, and the effects of the ethoxy units in HDA-2n on the overall performance of the plasticized PLA were systematically investigated. The results showed that, compared with PLA blended with dioctyl terephthalate (DOTP), the PLA plasticized by HDA-8 with the maximum number of ethoxy units (PLA/HDA-8) exhibited better low-temperature resistance (40.1 °C vs. 15.3 °C), thermal stability (246.8 °C vs. 327.6 °C) and gas barrier properties. Additionally, the biodegradation results showed that HDA-8 could be biodegraded by directly burying it in soil. All results suggest that HDA-8 could be used as green alternative to the traditional petroleum-based plasticizer DOTP, which is applied in the PLA industry.

Copolyester toughened poly(lactic acid) biodegradable material prepared by in situ formation of polyethylene glycol and citric acid

Polylactic acid (PLA) is a high-modulus, high-strength bio-based thermoplastic polyester with good biodegradability, which is currently a promising environmentally friendly material. However, its inherent brittleness has hindered its widespread use. In this study, we reported a simple and non-toxic strategy for toughening PLA, using biodegradable materials such as polyethylene glycol (PEG) and citric acid (CA) as precursors. Through reactive melt blending with PLA, PEG and CA form PEGCA copolyesters in situ during blending. At the same time, CA can react with PLA and PEG, forming a copolyester structure at the interface of the two phases, improving the interfacial compatibility between PEG and PEGCA with PLA. Fourier transform infrared spectroscopy confirms this. Experimental results show that when the content of PEG/CA reaches 15% (PLA/PEG/CA-15%) in the blends, the impact strength of the blend was 4.47 kJ m-2, and the maximum elongation at break was as high as 360.1%, which were about 2 and 44 times higher than those of pure PLA, respectively. Moreover, the tensile strength was still maintained at the level of 70%. This work can expand the application of PLA in food packaging and medical supplies.

Electrothermal Phase Change Composite with Flexibility over a Wide Temperature Range for Wearable Thermotherapy

Flexible electrothermal composite phase change materials (PCMs) are promising candidates for portable thermotherapy. However, a great challenge remains to achieve high PCM loading while maintaining reasonable flexibility. Herein, the polypyrrole-decorated melamine foam (PPy@MF) was fabricated and thereafter applied to confine binary PCM mixtures composed of a high-enthalpy long-chain polyethylene glycol (PEG4000) and its short-chain homologue (PEG200) to make the novel PPy@MF-PEG4000+200 composite PCM. At a high loading of up to 74.1% PEG4000 and a high latent heat energy storage density of 150.1 J/g, the composite PCM remained flexible at temperature (-20 °C) far below its phase transition point thanks to the plasticine effect of PEG200. The composite also demonstrated good Joule heating performance, providing fast heating from 28 to 70 °C at low applied voltages (4.5-6.0 V). The energy could be stored efficiently and released to maintain the composites at the proper temperature. The electrothermal performance of the composite remained undisturbed during curved or repeated bending, showing good potential to be used for personal thermal management and thermotherapy.

Recent Approaches to the Plasticization of Poly(lactic Acid) (PLA) (A Review)

Poly(lactic acid) (PLA) is a polyester attracting growing interest every year in different application fields, such as packaging, cosmetics, food, medicine, etc. Despite its significant advantages, it has low elasticity that may hinder further development and a corresponding rise in volume of consumption. This review opens a discussion of basic approaches to PLA plasticization. These considerations include copolymerization and blending with flexible polymers, introducing oligomers and low-molecular additives, as well as structural modification. It was demonstrated that each approach has its advantages, such as simplicity and low cost, but with disadvantages, including complex processing and the need for additional reagents. According to the analysis of different approaches, it was concluded that the optimal option is the application of copolymers as the additives obtained via reactive mixing to PLA and its blends with other polymers.

Strategies for strengthening toughened poly(lactic acid) blend via natural reinforcement with enhanced biodegradability: A review

The growing popularity of poly(lactic acid) (PLA) can be attributed to its favorable attributes, such as excellent compostability and robust mechanical properties. Two notable limitations of PLA are its high brittleness and slow biodegradation rate. Both of blending and copolymerization strategies work well to improve PLA's toughness while sacrificing the good tensile strength and modulus properties of PLA. One of the most effective and economical approaches to address this challenge is to incorporate natural reinforcing agents into the toughened PLA system, thereby simultaneously promoting the biodegradation rate of PLA. Nevertheless, the enhancement of tensile strength and modulus is accompanied by a notable decrease in elongation. Therefore, this review provides comprehensive information on the literature works related to the tensile strength, modulus, elongation at break and impact strength of the toughened PLA and its natural fiber reinforced composites. The impact of natural reinforcing agent on the tensile fracture mechanism as well as the synergistic effect on strengthening and toughening performance will be discussed. This review also focuses on the factors boosting the biodegradability of toughened PLA blend by using natural reinforcing fiber. Review presents potential future insights into the development of biodegradable and balanced strengthened-toughened PLA based advanced materials.

The Physical Properties and Crystallization Kinetics of Biocomposite Films Based on PLLA and Spent Coffee Grounds

In the context of today's needs for environmental sustainability, it is important to develop new materials that are based on renewable resources and biodegrade at the end of their life. Bioplastics reinforced by agricultural waste have the potential to cause a revolution in many industrial applications. This paper reports the physical properties and crystallization kinetics of biocomposite films based on poly(L-lactic acid) (PLLA) and 10 wt.% of spent coffee grounds (SCG). To enhance adhesion between the PLLA matrix and SCG particles, a compatibilizing agent based on itaconic anhydride (IA)-grafted PLLA (PLLA-g-IA) was prepared by reactive extrusion using dicumyl peroxide (DCP). Furthermore, due to the intended application of the film in the packaging industry, the organic plasticizer acetyl tributyl citrate (ATBC) is used to improve processing and increase ductility. The crystallization behavior and thermal properties were observed by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Crystallinity degree increased from 3,5 (neat PLLA) up to 48% (PLLA/PLLA-g-IA/ATBC/SCG) at the highest cooling rate. The physical properties were evaluated by tensile testing and dynamic mechanical analysis (DMA). The combination of the compatibilizer, SCG, and ATBC led to a synergistic effect that positively influenced the supramolecular structure, internal damping, and overall ductility of the composite films.

Synthesis and Characterization of Maleic Anhydride-Methyl Methacrylate Co-Monomer Grafted Polyethylene Wax for Hot Waxed Wood Process

The beeswax used in Chinese traditional hot waxed wood technology has several drawbacks, such as high price, scarce resources, and poor heat resistance. To expand the application of hot waxing technology in the field of wood decoration and protection, polyethylene wax was modified by a grafted maleic anhydride-methyl methacrylate co-monomer. A type of modified polyethylene wax with low cost, high melting point, high stability, and strong polarity suitable for hot waxed wood was prepared as a replacement for beeswax. The effects of the grafting conditions on the chemical properties, thermal properties, chemical structure, and crystallization properties of modified polyethylene wax were studied and compared to those of beeswax. The results show that maleic anhydride-methyl methacrylate co-monomer grafting can effectively improve the acid value of polyethylene wax. For the ratio of two monomers of 1/1, the total amount of monomer of 8 wt%, the amount of initiator of 2 wt%, the reaction temperature of 150 °C, and the acid value of modified polyethylene wax was consistent with that of beeswax, realizing the simulation of the main chemical properties of beeswax. The thermal stability and melting temperature of the modified polyethylene wax are significantly higher than those of beeswax, its crystal structure is similar to that of beeswax, and the cyclic anhydride groups and ester groups introduced by co-monomer grafting endow it with polar groups that play an important role in the wood hot waxing process.

Tuning the Physicochemical, Structural, and Antimicrobial Attributes of Whey-Based Poly (L-Lactic Acid) (PLLA) Films by Chitosan Nanoparticles

Recently, the research and innovation to produce raw materials from microbial processes has gained much attention due to their economic and environmental impacts. Lactic acid is a very important microbial product due to its wide application in the food, pharmaceutical, cosmetic, and chemical industries. In the current study, poly (L-lactic acid) (PLLA) was produced by the ring opening polymerization (ROP) technique of L-lactic acid recovered from whey fermentation, and was used for the production of nanocomposites films reinforced with chitosan nanoparticles (CNPs) (average diameter ca. 100–200 nm). Three different CNPs concentrations, namely 1, 3, and 5% w/w, were tested, and their influence on the physical, mechanical, thermal, antibacterial and structural attributes of PLLA film was assessed. The results showed that the addition of CNPs up to 3% caused a significant improvement in water vapor permeability, appearance, tensile strength and elongation at break. The antibacterial properties of nanocomposites followed a dose-depended pattern as a result of CNPs addition. Therefore, the best inhibitory effects on Escherichia coli and Staphylococcus aureus was made by the addition of 5% of CNPs and lower dosages slightly affected the growth of pathogens or didn't cause any inhibitory effects (in 1% of CNPs). It can be concluded that the incorporation of CNPs into the PLLA matrix allows to improve the structural, thermal, physical, mechanical and antibacterial properties of the polymer, generating promising systems for food packaging and biomedical applications.

Following Polymer Degradation with Nanodiamond Magnetometry

Degradable polymers are widely used in the biomedical fields due to non-toxicity and great biocompatibility and biodegradability, and it is crucial to understand how they degrade. These polymers are exposed to various biochemical media in medical practice. Hence, it is important to precisely follow the degradation of the polymer in real time. In this study, we made use of diamond magnetometry for the first time to track polymer degradation with nanoscale precision. The method is based on a fluorescent defect in nanodiamonds, which changes its optical properties based on its magnetic surrounding. Since optical signals can be read out more sensitively than magnetic signals, this method allows unprecedented sensitivity. We used a specific mode of diamond magnetometry called relaxometry or T1 measurements. These are sensitive to magnetic noise and thus can detect paramagnetic species (gadolinium in this case). Nanodiamonds were incorporated into polylactic acid (PLA) films and PLA nanoparticles in order to follow polymer degradation. However, in principle, they can be incorporated into other polymers too. We found that T1 constants decreased gradually with the erosion of the film exposed to an alkaline condition. In addition, the mobility of nanodiamonds increased, which allows us to estimate polymer viscosity. The degradation rates obtained using this approach were in good agreement with data obtained by quartz crystal microbalance, Fourier-transform infrared spectroscopy, and atomic force microscopy.

Effect of Extrusion Screw Speed and Plasticizer Proportions on the Rheological, Thermal, Mechanical, Morphological and Superficial Properties of PLA

One of the critical processing parameters-the speed of the extrusion process for plasticized poly (lactic acid) (PLA)-was investigated in the presence of acetyl tributyl citrate (ATBC) as plasticizer. The mixtures were obtained by varying the content of plasticizer (ATBC, 10-30% by weight), using a twin screw extruder as a processing medium for which a temperature profile with peak was established that ended at 160 °C, two mixing zones and different screw rotation speeds (60 and 150 rpm). To evaluate the thermo-mechanical properties of the blend and hydrophilicity, the miscibility of the plasticizing and PLA matrix, Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), oscillatory rheological analysis, Dynamic Mechanical Analysis (DMA), mechanical analysis, as well as the contact angle were tested. The results derived from the oscillatory rheological analysis had a viscous behavior in the PLA samples with the presence of ATBC; the lower process speed promotes the transitions from viscous to elastic as well as higher values of loss modulus, storage modulus and complex viscosity, which means less loss of molecular weight and lower residual energy in the transition from the viscous state to the elastic state. The mechanical and thermal performance was optimized considering a greater capacity in the energy absorption and integration of the components.

Heat Properties of Polylactic Acid Biocomposites after Addition of Plasticizers and Oil Palm Frond Microfiber

Polylactic acid (PLA) is a biopolymer that can replace thermoplastic polymers such as polypropylene (PP) in various applications due to strength, young modulus, biocompatibility, biodegradability, good clarity, oil resistance, and oxygen barrier ability. However, PLA has some drawbacks, including brittle, high glass transition temperature (Tg), and low degradation and crystallization rates. Therefore, modification is needed with the addition of nucleating agents and plasticizers to overcome these limitations of PLA. This research aims to study the effect of plasticizers and microfibril cellulose of oil palm frond (OPF) on thermal stability and to review the crystallization kinetics of PLA biocomposites. Polyethylene glycol and triacetin were used as plasticizers. Thermal analysis was performed using Thermal Gravimetry analysis (TGA) and Differential Scanning Calorimetry (DSC). The crystallization kinetics study was analyzed using a modified Avrami model under non-isothermal conditions. PLAP4000 has better thermal stability than PLAP200 and PLAG with Tonset and Tmax values reaching 349.17°C and 374.68°C, respectively, which are close to pure PLA. All types of plasticizers influenced decreasing the Tg value in the range of 27–42%, whereas OPF microfiber addition contributes to a Tg reduction of 37-55 %. Crystallization kinetic study was informed for heterogeneous and simultaneous nucleation mechanisms with an n value range of about 2-3 for PLAP4000 and PLAOP4000. The crystallization rate was multiplied 4-9-fold for PLAOP200 and 2-3-fold for PLAOP4000.

Rapid development of dual porous poly(lactic acid) foam using fused deposition modeling (FDM) 3D printing for medical scaffold application

The poor melt property and brittleness of poly(lactic acid) (PLA) cause difficulties in extrusion foaming and decrease product performance in industrial and research fields. In this paper, the rheological properties of PLA resin were improved using an epoxy chain extension reaction, which led to the improvement of pore properties such as morphology and foamability. Reinforced PLA was extruded in a porous filament, and a scaffold was fabricated with design freedom, one-step processing, and dual porosity by extrusion foaming and 3D printing. In addition, in vitro cell culture tests were performed to verify the cell biology assessment and confirm the potential of the scaffold for application as medical scaffolds.

Plasticization of Polylactide with Myrcene and Limonene as Bio-Based Plasticizers: Conventional vs. Reactive Extrusion

Polylactide (PLA) was blended by conventional and reactive extrusion with limonene (LM) or myrcene (My) as bio-based plasticizers. As-processed blends were carefully analyzed by a multiscale and multidisciplinary approach to tentatively determine their chemical structure, microstructure, thermal properties, tensile and impact behaviors, and hydrothermal stability. The main results indicated that LM and My were efficient plasticizers for PLA, since compared to neat PLA, the glass transition temperature was reduced, the ultimate tensile strain was increased, and the impact strength was increased, independently of the type of extrusion. The addition of a free radical initiator during the extrusion of PLA/LM was beneficial for the mechanical properties. Indeed, the probable formation of local branched/crosslinked regions in the PLA matrix enhanced the matrix crystallinity, the tensile yield stress, and the tensile ultimate stress compared to the non-reactive blend PLA/LM, while the other properties were retained. For PLA/My blends, reactive extrusion was detrimental for the mechanical properties since My polymerization was accelerated resulting in a drop of the tensile ultimate strain and impact strength, and an increase of the glass transition temperature. Indeed, large inclusions of polymerized My were formed, decreasing the available content of My for the plasticization and enhancing cavitation from inclusion-matrix debonding.

The Strengthening and Toughening of Biodegradable Poly (Lactic Acid) Using the SiO2-PBA Core-Shell Nanoparticle

The balance of strengthening and toughening of poly (lactic acid) (PLA) has been an intractable challenge of PLA nanocomposite development for many years. In this paper, core-shell nanoparticles consisting of a silica rigid core and poly (butyl acrylate) (PBA) flexible shell were incorporated to achieve the simultaneous enhancement of the strength and toughness of PLA. The effect of core-shell nanoparticles on the tensile, flexural and Charpy impact properties of PLA nanocomposite were experimentally investigated. Scanning electron microscopy (SEM) and small-angle X-ray scattering (SAXS) measurements were performed to investigate the toughening mechanisms of nanocomposites. The experimental results showed that the addition of core-shell nanoparticles can improve the stiffness and strength of PLA. Meanwhile, its elongation at break, tensile toughness and impact resistance were enhanced simultaneously. These observations can be attributed to the cavitation of the flexible shell in core-shell nanoparticles and the resultant shear yielding of the matrix. In addition, a three-dimensional finite element model was also proposed to illustrate the damage processes of core-shell nanoparticle-reinforced polymer composites. It was found that, compared with the experimental performance, the proposed micromechanical model is favorable to illustrate the mechanical behavior of nanocomposites.

Poly (lactic acid) blends: Processing, properties and applications

Poly (lactic acid) or polylactide (PLA) is a commercial biobased, biodegradable, biocompatible, compostable and non-toxic polymer that has competitive material and processing costs and desirable mechanical properties. Thereby, it can be considered favorably for biomedical applications and as the most promising substitute for petroleum-based polymers in a wide range of commodity and engineering applications. However, PLA has some significant shortcomings such as low melt strength, slow crystallization rate, poor processability, high brittleness, low toughness, and low service temperature, which limit its applications. To overcome these limitations, blending PLA with other polymers is an inexpensive approach that could also tailor the final properties of PLA-based products. During the last two decades, researchers investigated the synthesis, processing, properties, and development of various PLA-based blend systems including miscible blends of poly l-lactide (PLLA) and poly d-lactide (PDLA), which generate stereocomplex crystals, binary immiscible/miscible blends of PLA with other thermoplastics, multifunctional ternary blends using a third polymer or fillers such as nanoparticles, as well as PLA-based blend foam systems. This article reviews all these investigations and compares the syntheses/processing-morphology-properties interrelationships in PLA-based blends developed so far for various applications.

Determination of non-volatile components of a biodegradable food packaging material based on polyester and polylactic acid (PLA) and its migration to food simulants

Bioplastic materials are increasingly used due to its benefits for the environment preservation. Among them, food packaging materials based on polylactic acid (PLA) are among the most employed. In this work, a sample treatment methodology based on dissolution/precipitation has been optimized, selecting finally dichloromethane/ethanol as solvent/antisolvent system. The extracts obtained were analysed by UPLC-MS(QTOF), that allowed the identification of the main PLA non-volatile components. The recovery results were between 100.9 to 114.0%. The methodology was applied to the analysis of pellets and films of a PLA-polyester blend sample. A total of 37 different compounds were detected, where the four compounds with the highest intensity in pellet samples were cyclic oligomers coming from the polyester part of the blend and composed by adipic acid (AA), phthalic acid (PA) and butanediol (BD). Migration experiments to 3 food simulants were also performed: ethanol 95% (v/v), ethanol 10% (v/v) and acetic acid 3% (w/v). The results showed that in addition to those compounds previously detected in the film, new compounds coming from the reaction of PLA components with food simulants were present in migration solutions.

Toughening of Poly(L-lactide) with Blends of Poly(ε-caprolactone-co-L-lactide) in the Presence of Chain Extender

A poly(ε-caprolactone-co-L-lactide) copolyester was synthesized and employed to toughen poly(L-lactide) (PLLA) by reactive melt blending in the presence of an epoxy-based chain extender. The effects of chain extension reaction and copolyester content on properties of PLLA-based blends were studied. The chain extension reaction reduced crystallinity and melt flow index of PLLA/copolyester blends. Meanwhile the copolyester blending improved the crystallinities of the chain-extended PLLA up to 20 wt% copolyester. The phase compatibility between PLLA matrix and dispersed copolyester phases was enhanced by the chain extension reaction. The impact strength of chain-extended PLLA increased with the contents of copolyester and chain extender.

Tablet formulation of Famotidine-loaded P-gp inhibiting nanoparticles using PLA-g-PEG grafted polymer

Our work aimed at evaluating the use of permeability glycoprotein (P-gp) inhibiting nanoparticles (NPs) as a part of a suitable oral solid dosage to improve bioavailability. Famotidine (Pepcid^®), a stomach acid production inhibitor, was used as a drug model to test our hypothesis. Famotidine-loaded NPs were prepared by solvent emulsion evaporation using PEG grafted on a polylactide acid (PLA) polymer backbone (PLA-g-PEG), with a 5% molar ratio of PEG versus lactic acid monomer and PEG of either 750 or 2000 Da molecular weight. Tablet formulation was composed of 40% Famotidine-loaded NPs, 52.5% microcrystalline cellulose as filler, 7% pre-gelatinized starch as binder/disintegrant, and 0.5% magnesium stearate as lubricant. Tablets containing 1.6 mg of Famotidine were prepared at an average weight of 500 mg, thickness of 6.2-6.5 mm, hardness of 5-8 kp, and disintegration time of <1 min. Our results suggest that Famotidine-loaded NPs using grafted PEG-g-PLA polymers can be formulated as an oral solid dosage form while effectively inhibiting P-gp mediated Famotidine efflux, irrespective of PEG molecular weights. This could therefore represent an attractive formulation alternative to enhance oral permeability and bioavailability of drugs that are P-gp substrates.

Combination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging

The massive use of synthetic plastics, in particular in the food packaging area, has a great environmental impact, and alternative more ecologic materials are being required. Poly(lactic) acid (PLA) and starch have been extensively studied as potential replacements for non-degradable petrochemical polymers on the basis of their availability, adequate food contact properties and competitive cost. Nevertheless, both polymers exhibit some drawbacks for packaging uses and need to be adapted to the food packaging requirements. Starch, in particular, is very water sensitive and its film properties are heavily dependent on the moisture content, exhibiting relatively low mechanical resistance. PLA films are very brittle and offer low resistance to oxygen permeation. Their combination as blend or multilayer films could provide properties that are more adequate for packaging purposes on the basis of their complementary characteristics. The main characteristics of PLA and starch in terms of not only the barrier and mechanical properties of their films but also of their combinations, by using blending or multilayer strategies, have been analyzed, identifying components or processes that favor the polymer compatibility and the good performance of the combined materials. The properties of some blends/combinations have been discussed in comparison with those of pure polymer films.

Design of PEG-grafted-PLA nanoparticles as oral permeability enhancer for P-gp substrate drug model Famotidine

Bioavailability of oral drugs can be limited by an intestinal excretion process mediated by P-glycoprotein (P-gp). Polyethylene glycol (PEG) is a known P-gp inhibitor. Dispersion of Famotidine (a P-gp substrate) within PEGylated nanoparticles (NPs) was used to improve its oral bioavailability. In this work, we evaluated the potential impact of NPs prepared from a grafted copolymer of polylactic acid and PEG on P-gp function by studying in vitro permeability of Famotidine across Caco-2 cells. Copolymers of PEG grafted on polylactic acid (PLA) backbone (PLA-g-PEG) were synthesised with 1 mol% and 5 mol% PEG vs. lactic acid monomer using PEG 750 and 2000 Da. The polymers were used to prepare Famotidine-loaded NPs and tested in vitro on Caco-2 cells. Significant decrease in basolateral-to-apical transport of Famotidine was observed when Famotidine was encapsulated in NPs prepared from PLA-g-PEG5%. NPs prepared from PLA-g-PEG5% are promising to improve oral bioavailability of P-gp substrates.