Calcium alginate hydrogel beads with high stiffness and extended dissolution behaviour

Development of emulsion-filled calcium alginate gels for thermoresponsive release of flavor in plant-based meat analogs

We developed emulsion-filled calcium alginate gels (EF-CAG) as a novel thermoresponsive carrier for plant-based meat analogs (PBMA), designed to mimic the cooking-induced flavor release of real meat. Optimized to maximize flavor release upon heating, EF-CAG demonstrated a thermoresponsive release of 51% with a notable size reduction. Initial release profiles varied between media; a burst release of 43% occurred in water within the first 5 min, while <1% was released in air. EF-CAG consistently increased flavor release in PBMA during cooking, without adversely affecting appearance or flavor stability, maintaining flavor retention at 4 °C for 10 days. The sensory evaluation confirmed that EF-CAG successfully masked the beef flavor before cooking and enhanced its release afterward. Our findings suggest that EF-CAG can be effectively used as a flavoring agent for PBMA, offering similar flavor attributes to real meat during cooking.

Microbead-Based Colorimetric and Portable Sensors for Polyphenol Detection

Natural polyphenols found in health supplements and drinks have antioxidant and anti-inflammatory properties. In particular, to determine the beneficial qualities of antioxidant drinks and beverages, consumers demand precise quantification of the total amount of polyphenols as on-site detection. Herein, we developed a new concept of portable beads suitable for the field detection available: colorimetric quantification of polyphenols equipped with color converting software applications in a smartphone or tablet PC. The yellowish beads contain ferric ions to react with polyphenol to produce blackish metal-phenolic complexes. It is simple to perform the detection procedure: dipping the beads in the analytical sample and out-taking a photo-converting into RGB color values and quantification of the existed polyphenol. The overall process was completed within 5 min. Compared with the Folin-Ciocalteu assay, which is a representative optical sensor kit for total phenolic content, the bead-based sensor showed a better limit of detection of 0.0415 mM for tannic acid and comparable sensing capability for a polyphenol-containing plant extract and brewed tea. The beads conserved the shape and sensitivity after months of storage or under environmental interference such as a change in the temperature.

Dual-network hydrogel capsules for controlled molecular transport via pH and temperature responsiveness

We have developed innovative core-shell hydrogel capsules with a dual-network shell structure designed for precise control of molecular transport in response to external stimuli such as pH and temperature. The capsules were fabricated using a combination of microfluidic electrospray techniques and water-in-water (w/w) core-shell droplets templating. The primary network of the shell, calcium alginate (Ca-Alg), with a pKa around 3.4, exhibits sensitivity to pH. The secondary network of the shell, poly(ethylene glycol) methyl ether methacrylate (PEGMA), undergoes a volume phase transition near 60 °C. These properties enable precise molecular transport control in/out of the capsules by modulating the surface charges through varying pH and modifying pore size through temperature changes. Moreover, the dual-network shell structure not only significantly enhances the mechanical strength of the capsules but also improves their stability under external stimulus, ensuring structural integrity during the transport of molecules. This research lays the groundwork for further investigations into the multimodal stimuli-responsive hydrogel systems to control molecular transport, important in applications such as sensors and reactors for chemical cascade reactions.

Metal Ion-Containing Hydrogels: Synthesis, Properties, and Applications in Bone Tissue Engineering

Hydrogel, as a unique scaffold material, features a three-dimensional network system that provides conducive conditions for the growth of cells and tissues in bone tissue engineering (BTE). In recent years, it has been discovered that metal ion-containing hybridized hydrogels, synthesized with metal particles as the foundation, exhibit excellent physicochemical properties, osteoinductivity, and osteogenic potential. They offer a wide range of research prospects in the field of BTE. This review provides an overview of the current state and recent advancements in research concerning metal ion-containing hydrogels in the field of BTE. Within materials science, it covers topics such as the binding mechanisms of metal ions within hydrogel networks, the types and fabrication methods of various metal ion-containing hydrogels, and the influence of metal ions on the properties of hydrogels. In the context of BTE, the review delves into the osteogenic mechanisms of various metal ions, the applications of metal ion-containing hydrogels in BTE, and relevant experimental studies in vitro and in vivo. Furthermore, future improvements in bone repair can be anticipated through advancements in bone bionics, exploring interactions between metal ions and the development of a wider range of metal ions and hydrogel types.

Comparative Analysis of Crosslinking Methods and Their Impact on the Physicochemical Properties of SA/PVA Hydrogels

Hydrogels, versatile materials used in various applications such as medicine, possess properties crucial for their specific applications, significantly influenced by their preparation methods. This study synthesized 18 different types of hydrogels using sodium alginate (SA) and two molecular weights of polyvinyl alcohol (PVA). Crosslinking agents such as aqueous solutions of calcium (Ca2+) and copper (Cu2+) ions and solutions of these ions in boric acid were utilized. The hydrogels were subjected to compression strength tests and drying kinetics analysis. Additionally, six hydrogel variants containing larger PVA particles underwent Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) post-drying. Some samples were lyophilized, and their surface morphology was examined using scanning electron microscopy (SEM). The results indicate that the choice of crosslinking method significantly impacts the physicochemical properties of the hydrogels. Crosslinking in solutions with higher concentrations of crosslinking ions enhanced mechanical properties and thermal stability. Conversely, using copper ions instead of calcium resulted in slower drying kinetics and reduced thermal stability. Notably, employing boric acid as a crosslinking agent for hydrogels containing heavier PVA molecules led to considerable improvements in mechanical properties and thermal stability.

Assessment of calcium alginate gels as wall materials for encapsulation systems

BACKGROUND

Calcium alginate gels are widely used to encapsulate active compounds. Some characteristic parameters of these gels are necessary to describe the release of active compounds through mechanistic mathematical models. In this work, transport and kinetics properties of calcium alginate gels were determined through simple experimental techniques.

RESULTS

The weight-average molecular weight (M ¯ w  = 192 × 103  Da) and the fraction of residues of α-l-guluronic acid (F G  = 0.356) of sodium alginate were determined by capillary viscometry and 1 H-nuclear magnetic resonance at 25 °C, respectively. Considering the half egg-box model, both values were used to estimate the molecular weight of calcium alginate asM g  = 2.02 × 105  Da. An effective diffusion coefficient of water (D eff , w  = 2.256 × 10-9  m2  s-1 ) in calcium alginate was determined using a diffusion cell at 37 °C. Finally, a kinetics constant of depolymerization (k m  = 9.72 × 10-9  m3  mol-1  s-1 ) of calcium alginate was obtained considering dissolution of calcium to a medium under intestinal conditions.

CONCLUSION

The experimental techniques used are simple and easily reproducible. The obtained values may be useful in the design, production, and optimization of the alginate-based delivery systems that require specific release kinetics of the encapsulated active compounds. © 2023 Society of Chemical Industry.

Application of biomacromolecules encapsulation systems for the long-term storage of Lactobacillus plantarum F1 and Lactobacillus reuteri 182

The aim of this study was to improve the viability of lactic acid bacteria (LAB) during extended storage of 1 year and mechanical characteristics of the calcium alginate beads with co-encapsulation of prebiotics and chitosan coating and subsequent freeze drying. The results revealed that the addition of trehalose to alginate matrix effectively protects the LAB cells during freeze drying, i.e., the survival rate has increased up to more than 92.5 %. Chitosan coating reinforced Ca-alginate beads, therefore the sphericity and mechanical strength of the beads improved. The findings also showed that bacteria encapsulation with the prebiotics resulted in more cells stability during the prolonged storage of 1 year and were 4.82 ± 0.06 log CFU g-1 in the lyophilized alginate-trehalose beads for Lactobacillus plantarum and 5.64 ± 0.08 log CFU g-1 in the lyophilized alginate-trehalose-inulin beads for Lactobacillus reuteri. No survival, however, was noted for the LAB cells in wet capsules after the same period. This study demonstrated that prebiotics had a significant impact on the viability of cells during freeze drying and storage. What is more, physical properties of the alginate beads were enhanced by coating beads with the chitosan.

Self-Assembly of Structured Colloidal Gels for High-Resolution 3D Micropatterning of Proteins at Scale

Self-assembly, the spontaneous ordering of components into patterns, is widespread in nature and fundamental to generating function across length scales. Morphogen gradients in biological development are paradigmatic as both products and effectors of self-assembly and various attempts have been made to reproduce such gradients in biomaterial design. To date, approaches have typically utilized top-down fabrication techniques that, while allowing high-resolution control, are limited by scale and require chemical cross-linking steps to stabilize morphogen patterns in time. Here, a bottom-up approach to protein patterning is developed based on a novel binary reaction-diffusion process where proteins function as diffusive reactants to assemble a nanoclay-protein composite hydrogel. Using this approach, it is possible to generate scalable and highly stable 3D patterns of target proteins down to sub-cellular resolution through only physical interactions between clay nanoparticles and the proteins and ions present in blood. Patterned nanoclay gels are able to guide cell behavior to precisely template bone tissue formation in vivo. These results demonstrate the feasibility of stabilizing 3D gradients of biological signals through self-assembly processes and open up new possibilities for morphogen-based therapeutic strategies and models of biological development and repair.

The pH-responsiveness carrier of sanxan gel beads crosslinked with CaCl2 to control drug release

Natural polysaccharide-based gel carriers have been widely studied for their potential to provide slow and controlled release. Sanxan is an edible polysaccharide produced by Sphingomonas sanxanigenens. In this study, gel beads were prepared using the extrusion dripping method with sanxan as the carrier material and HCl and CaCl2 as the fixing solution. The molecular structure, texture profile, and microstructure of the bead were analyzed. And the swelling characterization and in vitro release of beads were evaluated. The results of Fourier-transform infrared analysis indicate that Ca2+ was used to create an ionically crosslinked structure of sanxan. Texture analyzer and scanning electron microscope studies showed that the acid‑calcium gel exhibited physical resistance and resilience, as well as a distinct gel pore structure. The swelling, dissolution, and drug release of the beads decreased as the amount of CaCl2 increased. Compared to the control (without CaCl2), the release of sanxan beads when 0.5 CaCl2 was added (sanxan carboxyl/Ca2+, by the number of moles M/M) in the stomach and small intestine release decreased by 40.9 % and 49.5 %, respectively. This study indicates that the fabrication of sanxan-Ca2+ crosslinked gel had sustained release characteristics, indicating that sanxan carriers have great potential for gradual and regulated medication delivery.

Gellan Gum/Alginate Microparticles as Drug Delivery Vehicles: DOE Production Optimization and Drug Delivery

Gellan gum is a biocompatible and easily accessible polysaccharide with excellent properties to produce microparticles as drug delivery systems. However, the production methods often fail in reproducibility, compromising the translational potential of such systems. In this work, the production of gellan gum-based microparticles was optimized using the coaxial air flow method, and an inexpensive and reproducible production method. A design of experiments was used to identify the main parameters that affect microparticle production and optimization, focusing on diameter and dispersibility. Airflow was the most significant factor for both parameters. Pump flow affected the diameter, while the gellan gum/alginate ratio affected dispersibility. Microparticles were revealed to be sensitive to pH with swelling, degradation, and encapsulation efficiency affected by pH. Using methylene blue as a model drug, higher encapsulation, and swelling indexes were obtained at pH 7.4, while a more pronounced release occurred at pH 6.5. Within PBs solutions, the microparticles endured up to two months. The microparticle release profiles were studied using well-known models, showing a Fickian-type release, but with no alteration by pH. The developed microparticles showed promising results as drug-delivery vehicles sensitive to pH.

Design and Development of Low- and Medium-Viscosity Alginate Beads Loaded with Pluronic® F-127 Nanomicelles

The anionic polymer sodium alginate, a linear copolymer of guluronic and mannuronic acids, is primarily present in brown algae. Copolymers are used in the sodium alginate preparation process to confer on the material strength and flexibility. Micelles and other polymeric nanoparticles are frequently made using the triblock copolymer Pluronic^® F-127. The purpose of the present study is to determine the effect of sodium alginate's viscosity (low and medium) and the presence of Pluronic^® F-127 micelles on the swelling behavior of the prepared pure beads and those loaded with Pluronic^® F-127 micelles. The Pluronic^® F-127 nanomicelles have a size of 120 nm. The swelling studies were carried out at pH = 1.2 (simulated gastric fluid-SGF) for two hours and at pH = 6.8 (simulated intestinal fluid-SIF) for four more hours. The swelling of both low- and medium-viscosity alginate beads was minor at pH = 1.2, irrespective of the use of Pluronic^® F-127 nanomicelles. At pH = 6.8, without Pluronic^® F-127, the beads showed an enhanced swelling ratio for the first four hours, which was even higher in the medium-viscosity alginate beads. With the addition of Pluronic^® F-127, the beads were dissolved in the first and second hour, in the case of the low- and medium-alginate's viscosity, respectively. In other words, the behavior of the mixed hydrogels was the same during the swelling experiments. Therefore, the presence of Pluronic^® F-127 nanomicelles and medium-viscosity sodium alginate leads to a higher swelling ratio. A model drug, acetyl salicylic acid (ASA), was also encapsulated in the mixed beads and ASA's release studies were performed. In conclusion, the prepared systems, which are well characterized, show potential as delivery platforms for the oral delivery of active pharmaceutical ingredients and biopharmaceuticals.

Alginate/xanthan gum hydrogels as forensic blood substitutes for bloodstain formation and analysis

Understanding the behaviour of human blood outside of the body has important implications in forensic research, especially related to bloodstain pattern analysis (BPA). The design of forensic blood substitutes (FBSs) can provide many advantages, including the incorporation of multiple physiological components for use as safe and reliable materials for forensic applications. In this work, we present the design of synthetic alginate and xanthan gum-based hydrogels that contain electrosprayed microparticles (MPs) with and without crosslinked DNA. In addition to the MPs, the alginate/xanthan gum FBS materials include fillers to alter the physical appearance and fluid properties of the material. The optimized FBS consisted of alginate (1% w/v) and xanthan gum (5.0 × 10^-3% w/v), 2 mM CaCl₂, ferric citrate (0.5% w/v), magnesium silicate (0.25% w/v), Allura Red dye (2% w/v), 0.025% v/v Tween 20 and 9.5% v/v MPs. The FBS was tested in passive dripping experiments relevant to BPA scenarios at various impact angles. The spreading ratio (D_s/D₀) was determined for 90° stains made on a paper surface and compared to bovine blood where the FBS was shown to simulate accurate and predictable spreading behaviour. In addition, we simulated other common BPA scenarios (e.g., impact patterns) and evidence processing potential. The FBS could be swabbed, and the DNA could be extracted, amplified, and genotyped analogous to human blood evidence. A stability test was also conducted which revealed a shelf-life of over 4 weeks where the material remains relevant to human blood at physiological temperature.

Encapsulation of Concentrated Solution Obtained by Block Freeze Concentration in Calcium Alginate and Corn Starch Calcium Alginate Hydrogel Beads

A model (sucrose and gallic acid) solution was concentrated by block freeze concentration (BFC) at three centrifugation cycles, and the solutions were encapsulated in calcium alginate and corn starch calcium alginate hydrogel beads. Static and dynamic tests determined the rheological behavior, differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) established thermal and structural properties, and the release kinetics was evaluated under in vitro simulated digestion experiment. The highest efficiency encapsulation value was close to 96%. As the concentrated solution increased in terms of solutes and gallic acid, the solutions were fitted to the Herschel-Bulkley model. Moreover, from the second cycle, the solutions exhibited the highest values of storage modulus (G') and loss modulus (G″), contributing to form a more stable encapsulation. The FTIR and DSC results demonstrated strong interactions between corn starch and alginate, establishing a good compatibility and stability in the bead formation. The kinetic release model under in vitro conditions was fitted to the Korsmeyer-Peppas model, demonstrating the significant stability of the model solutions inside the beads. Therefore, the present study proposes a clear and precise definition for the elaboration of liquid foods obtained by BFC and its incorporation inside an edible material that facilitates the controlled release in specific sites.

Development of chondrocyte-laden alginate hydrogels with modulated microstructure and properties for cartilage regeneration

Alginate hydrogel is an attractive biomaterial for cell microencapsulation. The microarchitecture of hydrogels can regulate cellular functions. This study aims to investigate the applicability of sodium citrate buffer (SCB) as a culture medium supplement for modulating the microstructure of alginate microbeads to provide a favorable microenvironment for chondrogenic induction. The chondrocyte-laden microbeads, with and without TGF-β3 incorporation, were produced through an encapsulator. The obtained small-sized microbeads (~300 μm) were exposed to a treatment medium containing SCB, composed of varied concentrations of sodium citrate (1.10-1.57 mM), sodium chloride (3.00-4.29 mM), and ethylenediaminetetraacetic acid (0.60-0.86 mM) to partially degrade their crosslinked structure for 3 days, followed by culture in a normal medium until day 21. Scanning electron microscope micrographs demonstrated a loose hydrogel network with an enhanced pore size in the SCB-treated microbeads. Increasing the concentration of SCB in the treatment medium reduced the calcium content of the microbeads via a Na⁺ /Ca²⁺ exchange process and improved the water absorption of the microbeads, resulting in a higher swelling ratio. All the tested SCB concentrations were non-cytotoxic. Increases in aggrecan and type II collagen gene expression and their corresponding extracellular matrix accumulation, glycosaminoglycans, and type II collagen were vividly detected in the TGF-β3-containing microbeads with increasing SCB concentrations in the treatment medium. Our findings highlighted that the combination of SCB treatment and TGF-β3 incorporation in the chondrocyte-laden microbeads is a promising strategy for enhancing cartilage regeneration, which may contribute to a versatile application in cell delivery and tissue engineering.

Tailoring polyvinyl alcohol-sodium alginate (PVA-SA) hydrogel beads by controlling crosslinking pH and time

Hydrogel-encapsulated catalysts are an attractive tool for low-cost intensification of (bio)-processes. Polyvinyl alcohol-sodium alginate hydrogels crosslinked with boric acid and post-cured with sulfate (PVA-SA-BS) have been applied in bioproduction and water treatment processes, but the low pH required for crosslinking may negatively affect biocatalyst functionality. Here, we investigate how crosslinking pH (3, 4, and 5) and time (1, 2, and 8 h) affect the physicochemical, elastic, and process properties of PVA-SA-BS beads. Overall, bead properties were most affected by crosslinking pH. Beads produced at pH 3 and 4 were smaller and contained larger internal cavities, while optical coherence tomography suggested polymer cross-linking density was higher. Optical coherence elastography revealed PVA-SA-BS beads produced at pH 3 and 4 were stiffer than pH 5 beads. Dextran Blue release showed that pH 3-produced beads enabled higher diffusion rates and were more porous. Last, over a 28-day incubation, pH 3 and 4 beads lost more microspheres (as cell proxies) than beads produced at pH 5, while the latter released more polymer material. Overall, this study provides a path forward to tailor PVA-SA-BS hydrogel bead properties towards a broad range of applications, such as chemical, enzymatic, and microbially catalyzed (bio)-processes.

Encapsulation of Mesona chinensis Benth Extract in Alginate Beads Enhances the Stability and Antioxidant Activity of Polyphenols under Simulated Gastrointestinal Digestion

The aim of this study was to investigate the stability and antioxidant activity of the polyphenols from Mesona chinensis Benth extract (MCE) and its alginate-based encapsulation by extrusion technique during simulated gastrointestinal digestion. The encapsulation efficacy ranged from 41.1 ± 4.7 to 56.7 ± 3.4% with different concentrations of MCE (50-75% v/v), sodium alginate (1.2-1.8% w/v), and CaCl₂ solution (3-5% w/v). The optimal condition for MCE-loaded alginate beads (MCB) was composed of 75% MCE, 1.5% alginate, and 3% CaCl₂ solution, which provided the highest encapsulation efficiency with a spherical structure and a mean particle diameter of 1516.67 ± 40.96 μm. Fourier transform infrared spectroscopy (FT-IR) reported no chemical interaction between alginate and MCE. The release of total phenolic content (TPC) was only 8.9% after placing MCB in water for 4 h. After simulated digestion, changes in TPC and ferric reducing antioxidant power (FRAP) of MCE significantly decreased by 25.0% and 29.7%, respectively. Interestingly, the incorporation of MCB significantly increased TPC and FRAP in the digesta compared to those of MCE during gastrointestinal tract conditions. The findings suggest that the encapsulation of MCE with alginate as a carrier helps to improve the bioaccessibility and biological activity of M. chinensis polyphenols.

Electro and magnetoactive printed bi-functional actuators based on alginate hybrid hydrogels

Soft materials are attracting much attention for the development of biostructures able to mimic the movement of natural systems by remote actuation. Multi-sensitive hydrogels are among the best materials for obtaining dynamic and biocompatible soft structures for soft actuators and related biomedical devices. Nevertheless, bioinks based on naturally occurring and stimuli responsive hydrogels able to be 3D printed continues being a challenge for advanced applications. In this work 3D printable electrically and magnetically responsive, non-cytotoxic, hybrid hydrogels based on alginate and zero monovalent iron nanoparticles (NPs) are presented. The effect of NPs addition on the physico-chemical properties of the hydrogels is addressed, together with its effect on the functional electroactive and magnetoactive response. NPs concentration up to 10 % do not affect the mechanical stability of the gels, while promoting an increase actuation response.

Determination of the Dissolution/Permeation and Apparent Solubility for Microencapsulated Emamectin Benzoate Using In Vitro and Ex Vivo Salmo salar Intestine Membranes

In this work, two microencapsulation techniques were used to protect and improve the absorption of emamectin benzoate (EB), which is an antiparasitic drug used to control Caligus rogercresseyi. EB has a low aqueous solubility, which affects its absorption in the intestine of Salmo salar. Microparticles were produced by spray drying and ionic gelation, using Soluplus® (EB−SOL) and sodium alginate (EB−ALG) as polymers, respectively. Studies were conducted on dissolution/permeation, apparent permeability (Papp), apparent solubility (Sapp), and absorption using synthetic and biological membranes. Based on these results, the amount of EB in the microparticles needed to achieve a therapeutic dose was estimated. The EB−ALG microparticles outperformed both EB−SOL and free EB, for all parameters analyzed. The results show values of 0.45 mg/mL (80.2%) for dissolution/permeation, a Papp of 6.2 mg/mL in RS−L, an absorption of 7.3% in RS, and a Sapp of 53.1% in EM medium. The EB−ALG microparticles decrease the therapeutic dose necessary to control the parasite, with values of 3.0−2 mg/mL and 1.1−2 mg/mL for EB in EM and RS, respectively. The Korsmeyer−Peppas kinetic model was the best model to fit the EB−ALG and EB−SOL dissolution/permeation experiments. In addition, some of our experimental results using synthetic membranes are similar to those obtained with biological membranes, which suggests that, for some parameters, it is possible to replace biological membranes with synthetic membranes. The encapsulation of EB by ionic gelation shows it is a promising formulation to increase the absorption of the poorly soluble drug. In contrast, the spray-dried microparticles produced using Soluplus® result in even less dissolution/permeation than free EB, so the technique cannot be used to improve the solubility of EB.

Kinetic Method of Producing Pores Inside Protein-Based Biomaterials without Compromising Their Structural Integrity

Hydrogels made from globular proteins cross-linked covalently into a stable network are becoming an important type of biomaterial, with applications in artificial tissue design and cell culture scaffolds, and represent a promising system to study the mechanical and biochemical unfolding of proteins in crowded environments. Due to the small size of the globular protein domains, typically 2-5 nm, the primary network allows for a limited transfer of protein molecules and prevents the passing of particles and aggregates with dimensions over 100 nm. Here, we demonstrate a method to produce protein materials with micrometer-sized pores and increased permeability. Our approach relies on forming two competing networks: a covalent network made from cross-linked bovine serum albumin (BSA) proteins via a light-activated reaction and a physical network triggered by the aggregation of a polysaccharide, alginate, in the presence of Ca²⁺ ions. By fine-tuning the reaction times, we produce porous-protein hydrogels that retain the mechanical characteristics of their less-porous counterparts. We further describe a simple model to investigate the kinetic balance between the nucleation of alginate and cross-linking of BSA molecules and find the upper rate of the alginate aggregation reaction driving pore formation. By enabling a more significant permeability for protein-based materials without compromising their mechanical response, our method opens new vistas into studying protein-protein interactions and cell growth and designing novel affinity methods.

Polymer and Crosslinker Content Influences Performance of Encapsulated Live Biotherapeutic Products

INTRODUCTION

Live biotherapeutic products (LBPs), or therapeutic microbes, are an emerging therapeutic modality for prevention and treatment of gastrointestinal diseases. Since LBPs are living, they are uniquely sensitive to external stresses (e.g., oxygen, acid) encountered during manufacturing, storage, and delivery. Here, we systematically evaluate how polymer and crosslinker concentration affects the performance of an encapsulated LBP toward developing a comprehensive framework for the characterization and optimization of LBP delivery systems.

METHODS

We encapsulate a model LBP, Lactobacillus casei ATCC 393, in calcium chloride (CaCl2)-crosslinked alginate beads, and evaluate how alginate and CaCl2 concentrations influence LBP formulation performance, including: (i) encapsulation efficiency, (ii) shrinkage upon drying, (iii) survival upon lyophilization, (iv) acid resistance, (v) release, and (vi) metabolite secretion. Approaches from microbiology (e.g., colony forming unit enumeration), materials science (e.g., scanning electron microscopy), and pharmaceutical sciences (e.g., release assays) are employed.

RESULTS

LBP-encapsulating alginate beads were systematically evaluated as a function of alginate and CaCl2 concentrations. Specifically: (i) encapsulation efficiency of all formulations was >50%, (ii) all alginate beads shrunk (after lyophilization) and recovered (after rehydration) similarly, (iii) at 10% alginate concentration, lower CaCl2 concentration decreased survival upon lyophilization, (iv) 10% alginate improved acid resistance, (v) sustained release was enabled by increasing alginate and CaCl2 concentrations, and (vi) encapsulation did not impair secretion of l-lactate as compared to free LBP.

CONCLUSIONS

This research demonstrates that polymer content and crosslinking extent modulate the performance of polymer-based LBP delivery systems, motivating research into the optimization of material properties for LBP delivery systems.

Eco-Friendly Biosorbents Based on Microbial Biomass and Natural Polymers: Synthesis, Characterization and Application for the Removal of Drugs and Dyes from Aqueous Solutions

Pharmaceuticals and dyes are a very important part of the nonbiodegradable or hard biodegradable substances present in wastewater. Microorganisms are already known to be effective biosorbents, but the use of free microbial cells involves difficulties in their separation from effluents and limits their application in wastewater treatment. Thus, this study aimed to develop biosorbents by immobilizing Saccharomyces cerevisiae, Saccharomyces pastorianus and Saccharomyces pastorianus residual biomass on natural polymers (alginate and chitosan) and to evaluate the biosorptive potential for removal of pharmaceuticals and dyes from water. Six types of biosorbents were synthesized and characterized by Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy techniques and their biosorptive capacities for three drugs (cephalexin, rifampicin, ethacridine lactate) and two dyes (orange II and indigo carmine) were evaluated. The obtained results show that the removal efficiency depends on the polymer type used for the immobilization. In case of alginate the removal efficiency is between 40.05% and 96.41% for drugs and between 27.83% and 58.29% for dyes, while in the case of chitosan it is between 40.83% and 77.92% for drugs and between 17.17% and 44.77% for dyes. In general, the synthesized biosorbents proved to be promising for the removal of drugs and dyes from aqueous solutions.

Metal-organic frameworks/alginate composite beads as effective adsorbents for the removal of hexavalent chromium from aqueous solution

Industrial waste discharge comprising heavy metals into potable water bodies induces many health hazards. This study investigates the role of metal-organic frameworks (MOFs) doped alginate beads (MOFs@ABs) as potential adsorbents for Cr(VI). Effects of pH, stirring rate, temperature, initial chrome concentration, and particles dosage on Cr(VI) adsorption are studied to evaluate adsorption ability of UiO-66@ABs for Cr(VI) removal from aqueous solution. The adsorption kinetics follows pseudo second order and the equilibrium isotherm is consistent with Langmuir isotherm model. The maximum adsorption capacity of UiO-66@ABs calculated from the model conforms to the experimental results. The desorption experiment of Cr(VI) adsorbed UiO-66@ABs (82%) demonstrates satisfactory regeneration efficiency. Based on our findings and comparative controlled experiments, the superiority of UiO-66@ABs promises their potential application in Cr(VI) removal from wastewater.

Bacterial Nanocellulose-Enhanced Alginate Double-Network Hydrogels Cross-Linked with Six Metal Cations for Antibacterial Wound Dressing

Alginate (Alg) and bacterial nanocellulose (BNC) have exhibited great potential in biomedical applications, especially wound dressing. Non-toxicity and a moisture-maintaining nature are common features making them favorable for functional dressing fabrication. BNC is a natural biopolymer that promotes major advances to the current and future biomedical materials, especially in a flat or tubular membrane form with excellent mechanical strength at hydrated state. The main drawback limiting wide applications of both BNC and Alg is the lack of antibacterial activity, furthermore, the inherent poor mechanical property of Alg leads to the requirement of a secondary dressing in clinical treatment. To fabricate composite dressings with antibacterial activity and better mechanical properties, sodium alginate was efficiently incorporated into the BNC matrix using a time-saving vacuum suction method followed by cross-linking through immersion in separate solutions of six cations (manganese, cobalt, copper, zinc, silver, and cerium). The results showed the fabricated composites had not only pH-responsive antibacterial activities but also improved mechanical properties, which are capable of acting as smart dressings. All composites showed non-toxicity toward fibroblast cells. Rat model evaluation showed the skin wounds covered by the dressings healed faster than by BNC.

Formation and characterization of calcium alginate hydrogel beads filled with cumin seeds essential oil

Preparation and characterization of novel encapsulation system based on calcium alginate hydrogels filled with cumin essential oil has been investigated. Firstly, the effect of sodium alginate concentration, CaCl₂ level, hardening time, encapsulation and emulsion fabrication methods was studied on loading capacity of the hydrogels using a Resolution-V fractional factorial design (2 _V^5-1 FFD), followed by response surface methodology (RSM). At the optimum point, the in-vitro release of phenolic compounds in simulated gastric and intestinal mediums were 96.02 ± 0.96% and 10.65 ± 1.23% after 180 min, respectively. The Scanning electron microscopy (SEM) images demonstrated a relatively smooth surface with small pore size. Based on SEM images and Fourier-transform infrared spectrums, the cumin essential oil was encapsulated successfully in calcium alginate beads. Thus, calcium alginate hydrogel could be introduced as a promising carrier for encapsulating biochemical active compounds with favorable features.

Improving alginate printability for biofabrication: establishment of a universal and homogeneous pre-crosslinking technique

Many different biofabrication approaches as well as a variety of bioinks have been developed by researchers working in the field of tissue engineering. A main challenge for bioinks often remains the difficulty to achieve shape fidelity after printing. In order to overcome this issue, a homogeneous pre-crosslinking technique, which is universally applicable to all alginate-based materials, was developed. In this study, the Young's Modulus after post-crosslinking of selected hydrogels, as well as the chemical characterization of alginate in terms of M/G ratio and molecular weight, were determined. With our technique it was possible to markedly enhance the printability of a 2% (w/v) alginate solution, without using a higher polymer content, fillers or support structures. 3D porous scaffolds with a height of around 5 mm were printed. Furthermore, the rheological behavior of different pre-crosslinking degrees was studied. Shear forces on cells as well as the flow profile of the bioink inside the printing nozzle during the process were estimated. A high cell viability of printed NIH/3T3 cells embedded in the novel bioink of more than 85% over a time period of two weeks could be observed.

Egg-box model-based gelation of alginate and pectin: A review

Alginate and pectin are emblematic natural polyuronates that have been widely used in food, cosmetics and medicine. Ca-dependent gelation is one of their most important functional properties. The gelation mechanisms of alginate and pectin, known as egg-box model, were believed to be basically the same, because their Ca-binding sites show a mirror symmetric conformation. However, studies have found that the formation and the structure of egg-box dimmers between alginate and pectin were different. Very few studies have reviewed those differences. Therefore, this study was proposed to first summarize the intrinsic and extrinsic factors that can influence the gelation of alginate and pectin. The differences in the effect of these factors on the gelation of alginate and pectin were then discussed. Meanwhile, the similarity and difference in their gelation mechanism was also summarized. The knowledge gained in this review would provide useful information for the practical applications of alginate and pectin.

Changes in the Physical Properties of Calcium Alginate Gel Beads Under a Wide Range of Gelation Temperature Conditions

Until now, most studies using calcium alginate gel (CAG) have been conducted primarily at room temperature (20 °C) without considering gelation temperature. Moreover, the effects of gelation temperature on the physical properties of CAG beads have not been studied in detail. We aimed to study the effect of gelation temperature on the physical properties (diameter, sphericity, and rupture strength) of CAG beads. Response surface methodology was used in this study. The independent variables were sodium alginate concentration (X₁, 1.2–3.6%, w/v), calcium lactate concentration (X₂, 0.5−4.5%, w/v), gelation temperature (X₃, 5–85 °C), and gelation time (X₄, 6–30 min). Diameter (Y₁, mm), sphericity (Y₂, %), and rupture strength (Y₃, kPa) were selected as the dependent variables. A decrease in gelation temperature increased the diameter, sphericity and rupture strength of the CAG beads. Additionally, the CAG beads prepared at 5 °C exhibited the highest rupture strength (3976 kPa), lowest calcium content (1.670 mg/g wet), and a regular internal structure. These results indicate that decreasing the gelation temperature slows the calcium diffusion rate in CAG beads, yielding a more regular internal structure and increasing the rupture strength of the beads.

Two kinds of ketoprofen enteric gel beads (CA and CS-SA) using biopolymer alginate

To obtain expected rapid-release and sustained-release of ketoprofen gel beads, this paper adopted biopolymer alginate to prepare alginate beads and chitosan-alginate gel beads. Formulation factors were investigated and optimized by the single factor test. The release of ketoprofen from calcium alginate gel beads in pH 1.0 hydrochloric acid solution was less than 10% during 2 h, then in pH6.8 was about 95% during 45 min, which met the requirements of rapid-release preparations. However, the drug release of chitosan-alginate gel beads in pH1.0 was less than 5% during 2 h, then in pH6.8 was about 50% during 6 h and reached more than 95% during 12 h, which had a good sustained-release behavior. In addition, the release kinetics of keteprofen from the calcium alginate gel beads fitted well with the Korsmeyer-Peppas model and followed a case-II transport mechanism. However, the release of keteprofen from the chitosan-alginate gel beads exhibited a non-Fickian mechanism and based on the mixed mechanisms of diffusion and polymer relaxation from chitosan-alginate beads. In a word, alginate gel beads of ketoprofen were instant analgesic, while chitosan-alginate gel beads could control the release of ketoprofen during gastro-intestinal tract and prolong the drug's action time.

Hydrogels: experimental characterization and mathematical modelling of their mechanical and diffusive behaviour

Hydrogels are materials widely used in biomedical, pharmaceutical, and nutraceutical applications. Knowledge of their mechanical and diffusive behaviour is desired to design new hydrogels-based-systems.

Designing biopolymer microgels to encapsulate, protect and deliver bioactive components: Physicochemical aspects

Biopolymer microgels have considerable potential for their ability to encapsulate, protect, and release bioactive components. Biopolymer microgels are small particles (typically 100nm to 1000μm) whose interior consists of a three-dimensional network of cross-linked biopolymer molecules that traps a considerable amount of solvent. This type of particle is also sometimes referred to as a nanogel, hydrogel bead, biopolymer particles, or microsphere. Biopolymer microgels are typically prepared using a two-step process involving particle formation and particle gelation. This article reviews the major constituents and fabrication methods that can be used to prepare microgels, highlighting their advantages and disadvantages. It then provides an overview of the most important characteristics of microgel particles (such as size, shape, structure, composition, and electrical properties), and describes how these parameters can be manipulated to control the physicochemical properties and functional attributes of microgel suspensions (such as appearance, stability, rheology, and release profiles). Finally, recent examples of the utilization of biopolymer microgels to encapsulate, protect, or release bioactive agents, such as pharmaceuticals, nutraceuticals, enzymes, flavors, and probiotics is given.