Enhancing the mechanical properties and self-healing efficiency of hydroxyethyl cellulose-based conductive hydrogels via supramolecular interactions

Free-standing and flexible polyvinyl alcohol-sodium alginate-polypyrrole electrodes based on interpenetrating network hydrogels

Flexible supercapacitors (FSCs) have attracted much attention due to their strong mechanical flexibility, wearability and portability, which greatly rely on the employed flexible electrodes. The conductive polymer hydrogels with excellent flexibility, processability and capacitive performance are one of the most promising candidates, which are still limited by their poor mechanical properties. Constructing robust interpenetrating polymer networks (IPN) is an effective approach to promote their mechanical properties. Herein, interpenetrating polyvinyl alcohol (PVA)-sodium alginate (SA)-polypyrrole (PPy) hydrogels are prepared by the freeze-thaw and in-situ polymerization method. The IPN structure composed of PVA and SA not only enhances the mechanical properties of hydrogels, but also provides substantial active sites for electrochemical reactions. Moreover, the hydrogen-bonding interaction between different components in the PVA-SA-PPy hydrogel boosts the charge/ion transfer. The optimal PVA-SA-PPy hydrogels show an elongation at break of 380 %, a tensile strength of 1.5 MPa, and a specific capacitance of 2646 mF cm-2 at 2 mA cm-2. The symmetric PVA-SA-PPy FSCs show an energy density of 96.7 μWh cm-2 at a power density of 999.9 μW cm-2, and the capacitance retention is 66.3 % after 10,000 cycles. These exceptional mechanical and electrochemical properties make the PVA-SA-PPy hydrogels a promising candidate for FSCs.

The Recent Progress of the Cellulose-Based Antibacterial Hydrogel

Cellulose-based antibacterial hydrogel has good biocompatibility, antibacterial performance, biodegradability, and other characteristics. It can be very compatible with human tissues and degradation, while its good water absorption and moisturizing properties can effectively absorb wound exudates, keep the wound moist, and promote wound healing. In this paper, the structural properties, and physical and chemical cross-linking preparation methods of cellulose-based antibacterial hydrogels were discussed in detail, and the application of cellulose-based hydrogels in the antibacterial field was deeply studied. In general, cellulose-based antibacterial hydrogels, as a new type of biomaterial, have shown good potential in antimicrobial properties and have been widely used. However, there are still some challenges, such as optimizing the preparation process and performance parameters, improving the antibacterial and physical properties, broadening the application range, and evaluating safety. However, with the deepening of research and technological progress, it is believed that cellulose-based antibacterial hydrogels will be applied and developed in more fields in the future.

Transparent, High Stretchable, Environmental Tolerance, and Excellent Sensitivity Hydrogel for Flexible Sensors and Capacitive Pens

The prospect of ionic conductive hydrogels in multifunctional sensors has generated widespread scientific interest. The new generation of flexible materials should be combined with superior mechanical properties, high conductivity, transparency, sensitivity, good self-restoring fatigue properties, and other multifunctional characteristics, while the current materials are difficult to meet these requirements. Herein, we prepared poly(acrylamide-acrylic acid) (P(AM-AA))/gelatin/glycerol-Al3+ (PG1G2A) ionic conducting hydrogel by one-pot polymerization under UV light. The prepared PG1G2A ionic conductive hydrogel had high tensile strength (539.18 kPa), excellent tensile property (1412.96%), good fast self-recovery and fatigue resistance, high transparency (>80%), excellent moisturizing, and antifreezing/drying properties. In addition, the ionic conductive hydrogel-based strain sensor can respond to mechanical stimulation and generate accurate, stable, and recyclable electrical signals, with excellent sensitivity (GF 5.81). In addition, the PG1G2A hydrogel could be used as flexible wearable devices for monitoring multiple strain and subtle movements of different body parts at different temperatures. Interestingly, the PG1G2A hydrogel capacitive pen embedded in the mold can be used to write and draw on the screen of a phone or tablet. This new multifunctional ionic conducting hydrogel shows broad application prospects in E-skin, motion monitoring, and human-computer interaction in extreme environments.

Highly stretchable, fast self-healing nanocellulose hydrogel combining borate ester bonds and acylhydrazone bonds

Self-healing hydrogels have received considerable attention as a promising material for flexible electronic devices given their mechanical durability and structurally tunable properties. In this study, a highly stretchable self-healing hydrogel with dual cross-linking network was developed via borate ester bonds generated by polyvinyl alcohol and borax, and acylhydrazone bonds formed by aldehyde nanocellulose with adipic acid dihydrazide-modified alginate. Compared with the single network hydrogel composed of polyvinyl alcohol and borax, the introduction of dynamic acylhydrazone bonds greatly increases the flexibility of the hydrogel. The elongation rate increased from 480 % to approximately 1440 %, and the self-healing efficiency increased from 84.6 % to 92.7 % after healing for 60 min at ambient temperature without any stimulus. Moreover, the longer the self-healing time, the more evident the self-healing effect of the acylhydrazone bonds. In addition, electrical measurements confirmed a wide working strain range (ca.1000 %), durability, and reliability. Once assembled as a strain sensor, the hydrogel is able to monitor both large and subtle human motions. Besides, this hydrogel exhibited desirable biocompatibility, as demonstrated by in vitro cytotoxicity towards NIH 3T3 cells. These integrated properties make this nanocomposite hydrogel a promising candidate for future applications as green, flexible, and smart sensors.

Preparation and Characterisation of Cellulose Nanocrystal/Alginate/Polyethylene Glycol Diacrylate (CNC/Alg/PEGDA) Hydrogel Using Double Network Crosslinking Technique for Bioprinting Application

In this study, we aimed to prepare and characterise hydrogel formulations using cellulose nanocrystals (CNCs), alginate (Alg), and polyethylene glycol diacrylate (PEGDA). The CNC/Alg/PEGDA formulations were formed using a double network crosslinking approach. Firstly, CNC was extracted from oil palm trunk, and the size and morphology of the CNCs were characterised using TEM analysis. Secondly, different formulations were prepared using CNCs, Alg, and PEGDA. The mixtures were crosslinked with Ca2+ ions and manually extruded using a syringe before being subjected to UV irradiation at 365 nm. The shear-thinning properties of the formulations were tested prior to any crosslinking, while the determination of storage and loss modulus was conducted post extrusion after the Ca2+ ion crosslink using a rheometer. For the analysis of swelling behaviour, the constructs treated with UV were immersed in PBS solution (pH 7.4) for 48 h. The morphology of the UV crosslinked construct was analysed using SEM imaging. The extracted CNC exhibited rod-like structures with an average diameter and length of around 7 ± 2.4 and 113 ± 20.7 nm, respectively. Almost all CNC/Alg/PEGDA formulations (pre-gel formulation) displayed shear-thinning behaviour with the power-law index η < 1, and the behaviour was more prominent in the 1% [w/v] Alg formulations. The CNC/Alg/PEGDA with 2.5% and 4% [w/v] Alg displayed a storage modulus dominance over loss modulus (G′ > G″) which suggests good shape fidelity. After the hydrogel constructs were subjected to UV treatment at 365 nm, only the F8 construct [4% CNC: 4% Alg: 40% PEGDA] demonstrated tough and flexible characteristics that possibly mimic the native articular cartilage property due to a similar water content percentage (79.5%). In addition, the small swelling ratio of 4.877 might contribute to a minimal change of the 3D construct’s geometry. The hydrogel revealed a rough and wavy surface, and the pore size ranged from 3 to 20 µm. Overall, the presence of CNCs in the double network hydrogel demonstrated importance and showed positive effects towards the fabrication of a potentially ideal 3D bioprinted scaffold.

Self-Healing Mechanism and Conductivity of the Hydrogel Flexible Sensors: A Review

Sensors are devices that can capture changes in environmental parameters and convert them into electrical signals to output, which are widely used in all aspects of life. Flexible sensors, sensors made of flexible materials, not only overcome the limitations of the environment on detection devices but also expand the application of sensors in human health and biomedicine. Conductivity and flexibility are the most important parameters for flexible sensors, and hydrogels are currently considered to be an ideal matrix material due to their excellent flexibility and biocompatibility. In particular, compared with flexible sensors based on elastomers with a high modulus, the hydrogel sensor has better stretchability and can be tightly attached to the surface of objects. However, for hydrogel sensors, a poor mechanical lifetime is always an issue. To address this challenge, a self-healing hydrogel has been proposed. Currently, a large number of studies on the self-healing property have been performed, and numerous exciting results have been obtained, but there are few detailed reviews focusing on the self-healing mechanism and conductivity of hydrogel flexible sensors. This paper presents an overview of self-healing hydrogel flexible sensors, focusing on their self-healing mechanism and conductivity. Moreover, the advantages and disadvantages of different types of sensors have been summarized and discussed. Finally, the key issues and challenges for self-healing flexible sensors are also identified and discussed along with recommendations for the future.

Revealing the enhanced structural recovery and gelation mechanisms of cation-induced cellulose nanofibrils composite hydrogels

In this study, we fabricate physically dual-crosslinked cellulose-based hydrogels by varying coordination bonding effects with the addition of either divalent or trivalent metal cations. The first crosslinked network is created by metal-carboxylate coordination bonds between the cellulose nanofibrils that have abundant carboxyl groups and the metal cations. The second crosslinked network is formed by the reaction of tetra-functional borate ion complex and the hydroxyl groups in polyvinyl alcohol. These physically dual-crosslinked networks are strongly interwoven by non-sacrificial hydrogen bonds, this dual-crosslinked network leads to enhanced recovery characteristics in the resulting hydrogels. We use three interval thixotropic testing to investigate the deformation and recovery behaviors of the hydrogels and plot their structural deformation parameters in phase diagrams to understand the underlying complexity of energy dissipation and viscoelastic dynamics of the dual-crosslinked hydrogels.

A Review on the Design and Hydration Properties of Natural Polymer-Based Hydrogels

Hydrogels are hydrophilic 3D networks that are able to ingest large amounts of water or biological fluids, and are potential candidates for biosensors, drug delivery vectors, energy harvester devices, and carriers or matrices for cells in tissue engineering. Natural polymers, e.g., cellulose, chitosan and starch, have excellent properties that afford fabrication of advanced hydrogel materials for biomedical applications: biodegradability, biocompatibility, non-toxicity, hydrophilicity, thermal and chemical stability, and the high capacity for swelling induced by facile synthetic modification, among other physicochemical properties. Hydrogels require variable time to reach an equilibrium swelling due to the variable diffusion rates of water sorption, capillary action, and other modalities. In this study, the nature, transport kinetics, and the role of water in the formation and structural stability of various types of hydrogels comprised of natural polymers are reviewed. Since water is an integral part of hydrogels that constitute a substantive portion of its composition, there is a need to obtain an improved understanding of the role of hydration in the structure, degree of swelling and the mechanical stability of such biomaterial hydrogels. The capacity of the polymer chains to swell in an aqueous solvent can be expressed by the rubber elasticity theory and other thermodynamic contributions; whereas the rate of water diffusion can be driven either by concentration gradient or chemical potential. An overview of fabrication strategies for various types of hydrogels is presented as well as their responsiveness to external stimuli, along with their potential utility in diverse and novel applications. This review aims to shed light on the role of hydration to the structure and function of hydrogels. In turn, this review will further contribute to the development of advanced materials, such as "injectable hydrogels" and super-adsorbents for applications in the field of environmental science and biomedicine.

Polymeric Materials with Antibacterial Activity: A Review

Infections caused by bacteria are one of the main causes of mortality in hospitals all over the world. Bacteria can grow on many different surfaces and when this occurs, and bacteria colonize a surface, biofilms are formed. In this context, one of the main concerns is biofilm formation on medical devices such as urinary catheters, cardiac valves, pacemakers or prothesis. The development of bacteria also occurs on materials used for food packaging, wearable electronics or the textile industry. In all these applications polymeric materials are usually present. Research and development of polymer-based antibacterial materials is crucial to avoid the proliferation of bacteria. In this paper, we present a review about polymeric materials with antibacterial materials. The main strategies to produce materials with antibacterial properties are presented, for instance, the incorporation of inorganic particles, micro or nanostructuration of the surfaces and antifouling strategies are considered. The antibacterial mechanism exerted in each case is discussed. Methods of materials preparation are examined, presenting the main advantages or disadvantages of each one based on their potential uses. Finally, a review of the main characterization techniques and methods used to study polymer based antibacterial materials is carried out, including the use of single force cell spectroscopy, contact angle measurements and surface roughness to evaluate the role of the physicochemical properties and the micro or nanostructure in antibacterial behavior of the materials.

A novel dual crosslinked polysaccharide hydrogel with self-healing and stretchable properties

We synthesized oxidatively modified acetoacetyl cellulose OCAA, and then a double-network polysaccharide complex hydrogel was prepared. The hydrogel exhibited very good mechanical strength, self-healing behavior, and good biocompatibility.

Conducting chitosan/hydroxylethyl cellulose/polyaniline bionanocomposites hydrogel based on graphene oxide doped with Ag-NPs

The current work focuses on a cheap and simple preparation of highly conducting chitosan/hydroxyl ethylcellulose/polyaniline loaded with graphene oxide doped by silver nanoparticles (CS/HEC/PAni/GO@Ag) bionanocomposite as a biodegradable and biocompatible hydrogel for energy storage technology. Scanning electron microscopy (SEM) displays the compatibility of chitosan, hydroxyl ethyl cellulose, and polyaniline and a good distribution of GO@Ag-NPs in bionanocomposite hydrogels. X-ray diffraction (XRD) displayed the structure and existence of GO@Ag-NPs in the matrix. The swelling percentage and the antibacterial activities slightly increased with raising the content of GO@Ag-NPs. Also, the presence of both chitosan and cellulose improves the biodegradation of the fabricated bionanocomposites, which is increased by adding GO. Moreover, the incorporation of 5% GO@Ag-NPs in hydrogels enhances dc-conductivity by about 25 times from 3.37 × 10^-3 to 8.53 × 10^-2 S/cm. The fabricated hydrogels are inexpensive, eco-friendly, and have high capacitance and permittivity, and so they can store electrical energy.

The Evolution of Flexible Electronics: From Nature, Beyond Nature, and To Nature

The flourishing development of multifunctional flexible electronics cannot leave the beneficial role of nature, which provides continuous inspiration in their material, structural, and functional designs. During the evolution of flexible electronics, some originated from nature, some were even beyond nature, and others were implantable or biodegradable eventually to nature. Therefore, the relationship between flexible electronics and nature is undoubtedly vital since harmony between nature and technology evolution would promote the sustainable development. Herein, materials selection and functionality design for flexible electronics that are mostly inspired from nature are first introduced with certain functionality even beyond nature. Then, frontier advances on flexible electronics including the main individual components (i.e., energy (the power source) and the sensor (the electric load)) are presented from nature, beyond nature, and to nature with the aim of enlightening the harmonious relationship between the modern electronics technology and nature. Finally, critical issues in next-generation flexible electronics are discussed to provide possible solutions and new insights in prospective exploration directions.

Self-healing stable polymer hydrogel for pH regulated selective adsorption of dye and slow release of graphene quantum dots

Developing composite hydrogels with excellent self-healing ability and reasonable mechanical strength is extremely challenging. Herein, to overcome this difficulty, we identify the importance of balancing the ratio between the components of a composite hydrogel based on graphene oxide and poly(acrylic acid-acrylamide) [GOxAAM]. The gel exhibits enhanced mechanical strength, excellent self-healing ability, and extraordinary swelling capacity (a swelling ratio of 732) at room temperature and neutral pH. Further, the dye adsorption of the composite hydrogel has been investigated. The hydrogel could selectively adsorb organic cationic dyes (methylene blue vs. rhodamine B) from contaminated water with remarkable efficiency (90-95%). The kinetics investigation suggests that the dye adsorption on this composite hydrogel follows a pseudo-second-order model. The reusability of the hydrogel has been demonstrated by repeating the adsorption-desorption process over 10-14 cycles with almost identical results in the adsorption efficiency. Moreover, the hydrogel is utilized as a solvent-induced slow release source for graphene quantum dots (GQDs). The results taken together suggest that the (GOxAAM) composite gel can be a promising candidate for developing multifunctional gel materials.

Conductive Tough Hydrogels with a Staggered Ion-Coordinating Structure for High Self-Recovery Rate

Conductive hydrogels are attracting increasing attention owing to their great potential for applications in flexible devices. For practical use, these high-water-content materials should not only show good conductivity but also be strong, stretchable, tough, and elastic. Herein, we describe a class of novel conductive tough hydrogels based on strong staggered Fe³⁺-carboxyl coordinating interactions. They are made from copolymers of acrylamide and N-acryloyl glutamic acid, a bidentate-based comonomer. The design of the staggered structure of Fe³⁺ and bidentate units is expected to enable energy dissipation and also results in a synergetic effect of two binding sites for fast self-recovery. We demonstrate that the equilibrated hydrogels with a water content of 53 wt % exhibit superior mechanical properties (e.g., highest tensile strength, 12.1 MPa; Young's modulus, 36.1 MPa; work of extension, 42.1 MJ m^-3; fracture energy, 10,691 J m^-2; compressive strength, 65.1 MPa at 98% strain without a macroscopic fracture) compared to the ion-coordinated hydrogels reported to date, including elasticity at small strain, fast self-recoverability at room temperature (∼25 °C), a high dielectric constant (k = 341-1395 at 100 kHz), and good electrical conductivity (0.0018-0.024 S cm^-1). Given their extraordinary overall characteristics, we envision their potential applications in flexible electronic devices.

Biodegradable Poly(acrylic acid-co-acrylamide)/Poly(vinyl alcohol) Double Network Hydrogels with Tunable Mechanics and High Self-healing Performance

We proposed a novel strategy in the fabrication of biodegradable poly(acrylic acid-co-acrylamide)/poly(vinyl alcohol) (P(AAc-co-Am)/PVA) double network (DN) hydrogels with good mechanical and self-healing properties. In the DN hydrogel system, P(AAc-co-Am) polymers form a network through the ionic coordinates between -COO- and Fe3+ and hydrogen bonding between -COOH and -CONH2, while another network is fabricated by the complexation between PVA and borax. The influences of the composition on the rheological behaviors and mechanical properties of the synthesized DN hydrogels were investigated. The rheological measurements revealed that the viscoelasticity and stiffness of the P(AAc-co-Am)/PVA DN hydrogels increase as the acrylamide and Fe3+ concentrations increase. At 0.05 mmol of Fe3+ and 50% of acrylamide, tensile strength and elongation at break of P(AAc-co-Am)/PVA DN hydrogels could reach 329.5 KPa and 12.9 mm/mm, respectively. These properties arise from the dynamic reversible bonds existed in the P(AAc-co-Am)/PVA DN hydrogels. These reversible bonds also give good self-healing properties, and the maximum self-healing efficiency of P(AAc-co-Am)/PVA DN hydrogels is up to 96.4%. The degradation test of synthesized DN hydrogels was also conducted under simulated physiological conditions and the weight loss could reach 74% in the simulated intestinal fluid. According to the results presented here, the synthesized P(AAc-co-Am)/PVA DN hydrogels have a potential application prospect in various biomedical fields.

Self-healing conductive hydrogels based on alginate, gelatin and polypyrrole serve as a repairable circuit and a mechanical sensor

Polypyrrole/alginate–gelatin conductive hydrogels serve as a repairable circuit and a mechanical sensor.

Self-Healing Cellulose Nanocrystals-Containing Gels via Reshuffling of Thiuram Disulfide Bonds

Self-healing gels based on reshuffling disulfide bonds have attracted great attention due to their ability to restore structure and mechanical properties after damage. In this work, self-healing gels with different cellulose nanocrystals (CNC) contents were prepared by embedding the thiuram disulfide bonds into gels via polyaddition. By the reshuffling of thiuram disulfide bonds, the CNC-containing gels repair the crack and recover mechanical properties rapidly under visible light in air. The thiuram disulfide-functionalized gels with a CNC content of 2.2% are highly stretchable and can be stretched approximately 42.6 times of their original length. Our results provide useful approaches for the preparation of dynamic CNC-containing gels with implications in many related engineering applications.