The effect of pulsed electric fields, ultraviolet light or high intensity light pulses in combination with manothermosonication on selected physico-chemical and sensory attributes of an orange and carrot juice blend

Sequential Pulsed Light and Ultrasound Treatments for the Inactivation of Saccharomyces cerevisiae and PPO and the Retention of Bioactive Compounds in Sweet Lime Juice

Designing a pasteurization con dition for sweet lime juice while ensuring microbial safety, enzymatic stability, and high nutritional quality is crucial for satisfying stakeholder demands. The present research investigates the effects of matrix pH, ultrasound treatments, and sequential pulsed light on the microbial population, enzyme activity, and bioactive chemicals in sweet lime juice. The sequential pulsed light (PL: 0.6-0.84 J/cm2) and ultrasound (US: 0.2-0.4 W/cm3) treatments for sweet lime juice were optimized using response surface methodology (RSM). A three-factor full factorial design was used for this purpose. The independent variables encompassed pH (X1), PL effective fluence (X2, J/cm2), and US intensity (X3, W/cm3). The responses assessed included the inactivation of Saccharomyces cerevisiae (Y1, log cfu/mL) and polyphenol oxidase (PPO: Y2 in %) and the retention of vitamin C (Y3, %). The polynomial models were optimized using numerical optimization to attain the maximum desirability value (0.89). The optimized PL + US sample (0.8 J/cm2 + 0.4 W/cm3, respectively) at pH 3.5 resulted in a 5-log cycle reduction in S. cerevisiae count and a 90% inactivation in PPO activity and retained 95% of its vitamin C content. This optimized sample underwent further analysis, including phenolic profiling, assessment of microbial cell morphology, and examination of enzyme conformational changes. After sequential pulsed-light (0.8 J/cm2) and ultrasound (0.4 W/cm3) treatments, yeast cells showed unusual structural changes, indicating additional targets besides membranes. Following PL + US treatment, the PPO composition changed to 2.7 ± 0.1% α-helix, 33.9 ± 0.3% β-sheet, 1.4 ± 0.2% β-turn, and 62 ± 0.7% random coil. Impressively, the optimized PL + US sample maintained a sensory acceptance level similar to that of the untreated sample.

Sonication and thermal treatment of pineapple juice: Comparative assessment of the physicochemical properties, antioxidant activities and microbial inactivation

Sonication is a novel processing method that is perceived as a substitute for heat treatment to ensure the safety of juice while reducing the loss of nutrients during processing. The impacts of sonication and thermal processing on pineapple juice, including physicochemical properties, antioxidant activities, and microbial inactivation, were studied. Pineapple juice was sonicated at 100 W and 140 W (for 5, 10 and 15 min) and heat-treated at 70 °C, 80 °C and 90 °C (for 1 min). Results indicated minor alterations in physicochemical characteristics after sonication and thermal processing, while sonication treatment showed better retention of the color, clarity, and browning index of pineapple juice. Moreover, sonication significantly increased the bioactive compounds (total carotenoids, ascorbic acid, phenolics, and flavonoids) and boosted the antioxidant activity of pineapple juice compared to the heat-processed juice. Although sonication reduced the microbial load significantly with the increasing exposure time, it could not thoroughly inactivate microorganisms like thermal treatment. Therefore, optimal sonication processing conditions are required to be determined. This study will help the food processors utilize sonication treatment in pineapple juice processing plants to inactivate microorganisms thoroughly while also boosting the nutritional value.

Analysis of the Effect of Various Potential Antimicrobial Agents on the Quality of the Unpasteurized Carrot Juice

Short shelf-life and poor microbial quality of minimally processed foods of plant origin pose a serious problem for the food industry. Novel techniques of minimal treatment combined with disinfection are being researched, and, for fresh juice, the addition of antimicrobial agents appears to be a promising route. In this research, fresh, nonfiltered, unpasteurized carrot juice was mixed with four potential antimicrobials (bourbon vanilla extract, peppermint extract, cannabidiol oil, and grapefruit extract). All four variants and the reference pure carrot juice were analyzed for metapopulational changes, microbial changes, and physicochemical changes. The potential antimicrobials used in the research have improved the overall microbial quality of carrot juice across 4 days of storage. However, it is important to notice that each of the four agents had a different spectrum of effectiveness towards the groups identified in the microflora of carrot juice. Additionally, the antimicrobials have increased the diversity of the carrot juice microbiome but did not prevent the occurrence of pathogenic bacteria. In conclusion, the use of antimicrobial agents such as essential oils or their derivatives may be a promising way of improving the microbial quality and prolonging the shelf-life of minimally processed foods, such as fresh juices, but the technique requires further research.

Comparing the antioxidant properties and volatile compounds of carrot-orange juice blend processed through varied chemical, pasteurization and ultrasound conditions

Ultrasound technique is one of the green technologies that is being utilized widely for varying food processes. Our aim in this study was to carry out ultrasonication, pasteurization and chemical preservation (Potassium metabisulfite) techniques on a carrot-orange juice blend. Additionally, the effect of these treatments on the storage period of about 21 days was also determined. The study displayed an array of results under the effect of different treatments. Throughout the storage period of 21 days' significant results were presented by the carrot juice blend subjected to the ultrasound technique (25 min) giving the highest values for total phenolic content (25.56 ± 1.29 mg GAE/100 mL), total antioxidant activity (573.48 ± 2.29 mg Trolox /100 mL), DPPH (32.32 ± 1.83 %) and reducing power (45.45 ± 1.92 mg AAE/100 mL) with least deterioration, followed by the blends treated with potassium metabisulfite (KMS) and pasteurization. The physicochemical analysis showed a non-significant effect of treatments on pH and total soluble solids (oBrix) of carrot-orange juice blends whereas, the changes in color parameters L*, a* and b* were noted to show changes in treated blends. Similarly, the results for the GC-MS quantification of volatile compounds displayed the highest concentrations in the ultrasonicated blends as compared to other techniques. The peak quantity was obtained for the hexanal (9903.43 ± 7.61 μg.kg-1) followed by 3-Methylbutanal (2638.7 ± 5.44 μg.kg-1), terpinolene (2337.16 ± 5.28 μg.kg-1), elemicin (2198.28 ± 5.28 μg.kg-1), myristicin (1936.62 ± 6.72 μg.kg-1). The use of sonication can effectively enhance the nutritional qualities of juice, as perceived by consumers.

Chitosan/kaolinite clay biocomposite as a sustainable and environmentally eco-friendly coating material for slow release NPK fertilizers: Effect on soil nutrients and tomato growth

Soil nutrient availability and non-biodegradation of some polymer-based slow-release fertilizers (SRFs) have a direct impact on crop production and soil ecological quality. Proper fertilization practices can lead to obviating adverse effects of over-fertilization on soil nutrients and, consequently, on crop yields. This work aims to assess the effect of a durable liner material based on biodegradable polymers on soil nutrient availability and tomato growth. For this purpose, Chitosan composite (CsGC) was adopted as a durable coating material, including clay as a reinforcing coating material. The influence of chitosan composite coating (CsGC) on the sustained nutrient release of coated NPK fertilizer (NPK/CsGC) was studied. Scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDX) were used to examine the coated NPK granules. Results revealed that the proposed coating film improved the mechanical strength of the NPK fertilizer and enhanced water retention capacity of the soil. The agronomic investigation has also proved their outstanding potential to boost chlorophyll content, biomass, and tomato metabolism. Furthermore, the surface response study confirmed a strong correlation between tomato quality and representative soil nutrients. Therefore, kaolinite clay, as part of the coating system, can be an effective way to improve tomato quality and maintain soil nutrients during tomato ripening.

Effects and impacts of technical processing units on the nutrients and functional components of fruit and vegetable juice

Fruit and vegetable juice (FVJ) has become a favorite beverage for all age groups because of its excellent sensory and nutritional qualities. FVJ has a series of health benefits such as antioxidant, anti-obesity, anti-inflammatory, anti-microbial and anti-cancer. Except for raw materials selection, processing technology and packaging and storage also play a vital role in the nutrition and functional components of FVJ. This review systematically reviews the important research results on the relationship between FVJ processing and its nutrition and function in the past 10 years. Based on the brief elucidation of the nutrition and health benefits of FVJ and the unit operation involved in the production process, the influence of a series of key technology units, including pretreatment, clarification, homogenization, concentration, sterilization, drying, fermentation and packaging and storage, on the nutritional function of FVJ was systematically expounded. This contribution provides an update on the impacts of technical processing units on the nutrients and functional components of FVJ and new perspectives for future studies.

Advances in pulsed electric stimuli as a physical method for treating liquid foods

There is a need for alternative technologies that can deliver safe and nutritious foods at lower costs as compared to conventional processes. Pulsed electric field (PEF) technology has been utilised for a plethora of different applications in the life and physical sciences, such as gene/drug delivery in medicine and extraction of bioactive compounds in food science and technology. PEF technology for treating liquid foods involves engineering principles to develop the equipment, and quantitative biochemistry and microbiology techniques to validate the process. There are numerous challenges to address for its application in liquid foods such as the 5-log pathogen reduction target in food safety, maintaining the food quality, and scale up of this physical approach for industrial integration. Here, we present the engineering principles associated with pulsed electric fields, related inactivation models of microorganisms, electroporation and electropermeabilization theory, to increase the quality and safety of liquid foods; including water, milk, beer, wine, fruit juices, cider, and liquid eggs. Ultimately, we discuss the outlook of the field and emphasise research gaps.

How to comprehensively improve juice quality: a review of the impacts of sterilization technology on the overall quality of fruit and vegetable juices in 2010-2021, an updated overview and current issues

Fruit and vegetable juices (FVJ) are rich in nutrients, so they easily breed bacteria, which cause microbial pollution and rapid deterioration of their quality and safety. Sterilization is an important operation in FVJ processing. However, regardless of whether thermal sterilization or non-thermal sterilization is used, the effect and its impact on the overall quality of FVJ are strongly dependent on the processing parameters, microbial species, and FVJ matrix. Therefore, for different types of FVJ, an understanding of the impacts that different sterilization technologies have on the overall quality of the juice is important in designing and optimizing technical parameters to produce value-added products. This article provides an overview of the application of thermal and non-thermal technique in the field of FVJ processing over the past 10 years. The operating principle and effects of various technologies on the inactivation of microorganisms and enzymes, nutritional and functional characteristics, physicochemical properties, and sensory quality of a wide range of FVJ are comprehensively discussed. The application of different combinations of hurdle technology in the field of FVJ sterilization processing are also discussed in detail. Additionally, the advantages, limitations, and current application prospects of different sterilization technologies are summarized.

Applications of Innovative Non-Thermal Pulsed Electric Field Technology in Developing Safer and Healthier Fruit Juices

The deactivation of degrading and pectinolytic enzymes is crucial in the fruit juice industry. In commercial fruit juice production, a variety of approaches are applied to inactivate degradative enzymes. One of the most extensively utilized traditional procedures for improving the general acceptability of juice is thermal heat treatment. The utilization of a non-thermal pulsed electric field (PEF) as a promising technology for retaining the fresh-like qualities of juice by efficiently inactivating enzymes and bacteria will be discussed in this review. Induced structural alteration provides for energy savings, reduced raw material waste, and the development of new products. PEF alters the α-helix conformation and changes the active site of enzymes. Furthermore, PEF-treated juices restore enzymatic activity during storage due to either partial enzyme inactivation or the presence of PEF-resistant isozymes. The increase in activity sites caused by structural changes causes the enzymes to be hyperactivated. PEF pretreatments or their combination with other nonthermal techniques improve enzyme activation. For endogenous enzyme inactivation, a clean-label hurdle technology based on PEF and mild temperature could be utilized instead of harsh heat treatments. Furthermore, by substituting or combining conventional pasteurization with PEF technology for improved preservation of both fruit and vegetable juices, PEF technology has enormous economic potential. PEF treatment has advantages not only in terms of product quality but also in terms of manufacturing. Extending the shelf life simplifies production planning and broadens the product range significantly. Supermarkets can be served from the warehouse by increasing storage stability. As storage stability improves, set-up and cleaning durations decrease, and flexibility increases, with only minor product adjustments required throughout the manufacturing process.

Screening the Antioxidant Activity of Thermal or Non-Thermally Treated Fruit Juices by In Vitro and In Vivo Assays

The health benefits of fruit juices have been associated with their high content of antioxidant compounds. Commercial juice has been traditionally heat-processed to destroy microorganisms and enzymes. However, high temperatures induce undesirable changes in the nutritional value of the juice. High-intensity pulsed electric fields (HIPEF) are being studied as an alternative to heat treatments. In addition, in vitro and in vivo methods have been recommended to determine the antioxidant potential of juices in a complementary manner. Thus, the antioxidant activity of untreated, high-intensity pulsed electric fields (HIPEF) or heat-treated fruit juices (tomato, apple, pineapple and orange) was studied using in vitro (TEAC, DPPH, FRAP and Folin-Ciocalteu) and in vivo assays (Saccharomyces cerevisiae). Vitamin C and total phenolic compounds in these juices were determined. The highest antioxidant activities (12.01 mmol of Trolox/L) were obtained through the Folin-Ciocalteu assay in orange juices. The lowest values (0.119 mmol of Trolox/L) were found in apple juice analysed by the FRAP assay. Vitamin C content varied from 10 mg/L (orange juice) to 344 mg/L (orange juice). The highest concentration of total phenolic compounds was determined in orange juice (1238 mg/L), whereas the lowest value was found in tomato juices (149 mg/L). The effect of HIPEF and thermal processing on the antioxidant potential of juices depended on the fruits used to prepare the juices and the antioxidant activity assay conducted. Vitamin C concentration was directly related to the antioxidant activity analysed by Folin-Ciocalteu and FRAP methods and the S. cerevisiae growth rate. S. cerevisiae yeast can be used as a feasible in vivo assay to further determine the antioxidant activity of fruit juices.

Ifs and buts of non-thermal processing technologies for plant-based drinks' bioactive compounds

Vegetables and fruits contain a variety of bioactive nutrients and non-nutrients that are associated with health promotion. Consumers currently demand foods with high contents of healthy compounds, as well as preserved natural taste and flavour, minimally processed without using artificial additives. Processing alternatives to be applied on plant-based foodstuffs to obtain beverages are mainly referred to as classical thermal treatments that although are effective treatments to ensure safety and extended shelf-life, also cause undesirable changes in the sensory profiles and phytochemical properties of beverages, thus affecting the overall quality and acceptance by consumers. As a result of these limitations, new non-thermal technologies have been developed for plant-based foods/beverages to enhance the overall quality of these products regarding microbiological safety, sensory traits, and content of bioactive nutrients and non-nutrients during the shelf-life of the product, thus allowing to obtain enhanced health-promoting beverages. Accordingly, the present article attempts to review critically the principal benefits and downsides of the main non-thermal processing alternatives (High hydrostatic pressure, pulsed electric fields, ultraviolet light, and ultrasound) to set up sound comparisons with conventional thermal treatments, providing a vision about their practical application that allows identifying the best choice for the sectoral industry in non-alcoholic fruit and vegetable-based beverages.

Application of pulsed light technology for fruits and vegetables disinfection: A review

Non-thermal technologies can maintain fruit and vegetable products quality better than traditional thermal processing. Pulsed light (PL) is a non-thermal method for microbial inactivation (vegetative cells and spores) in fruits and vegetables. The PL treatment involves the application of intense and short-duration pulses of broad spectrum wavelengths ranging from UV to near-infrared (100-1100 nm). This review summarized application of PL technology to control microbial contamination and increasing shelf-life of some fruits and vegetables including apple, blueberries, grape, orange, strawberries, carrot, lettuce, spinach, and tomato. The microbial inactivation in very short treatment times, low energy used by this system, flexibility for solid or liquid samples, few residual compounds and no synthetic chemicals that cause environmental pollution or harm humans, is benefits of PL technique. The efficiency of PL disinfection is closely associated with the input voltage, fluence (energy dose), composition of the emitted light spectrum, number of lamps, the distance between samples and light source, and frequency and number of applied pulses. The PL treatments control pathogenic and spoilage microorganisms, so it facilitates the growth and development of the starter microorganisms affecting product quality.

Pasteurization of fruit juices by pulsed light treatment: A review on the microbial safety, enzymatic stability, and kinetic approach to process design

Pulsed light (PL) is a polychromatic radiation-based technology, among many other non-thermal processing techniques. The microbiological lethality of the PL technique has been explored in different food matrices along with their associated mechanisms. Pasteurization of fruit juice requires a 5-log cycle reduction in the resistant pathogen in the product. The manufacturers look toward achieving the microbial safety and stability of the juice, while consumers demand high-quality juice. Enzymatic spoilage in fruit juice is also a crucial factor that needs attention. The retailers want the processed juice to be stable, which can be achieved by inactivating the spoilage enzymes and native microflora inside it. The present review argued about the potential of PL technology to produce a microbiologically safe and enzymatically stable fruit juice with a minimal loss in bioactive compounds in the product. Concise information of factors affecting the PL treatment (PLT), primary inactivation mechanism associated with microorganisms, enzymes, the effect of PLT on various quality attributes (microorganisms, spoilage enzymes, bioactive components, sensory properties, color), and shelf life of fruit juices has been put forward. The potential of PL integrated with other non-thermal and mild thermal technologies on the microbial safety and stability of fruit juices has been corroborated. The review also provides suggestions to the readers for designing, modeling, and optimizing the PLT and discusses the use of various primary, secondary kinetic models in detail that have been utilized for different quality parameters in juices. Finally, the challenges and future need associated with PL technology has been summarized.

Postharvest Quality of Cherry Tomatoes Coated with Mucilage from Dragon Fruit and Irradiated with UV-C

Cherry tomatoes are climacteric fruits that have a limited shelf life. Over the years, many methods have been applied to preserve the fruit quality and safety of these fruits. In this study, a novel method of combining mucilage from dragon fruits and UV-C irradiation was carried out. Cherry tomatoes were subjected to UV-C irradiation and edible coating, both as a stand-alone and hurdle treatment. The edible coating was prepared from the mucilage of white dragon fruits. Quality parameters including color, weight loss, total soluble solids, titratable acidity, ascorbic acid, antioxidant analysis (total phenolic content and flavonoid content), and microbial analysis were measured throughout 21 days of storage at 4 °C. Results showed that the hurdle treatment extended shelf life by 21 days, reduced weight loss (0.87 ± 0.05%) and color changes (11.61 ± 0.95 ΔE), and inhibited microbes better than stand-alone treatments. Furthermore, fruits treated with the combination of UV-C and edible coating also contained higher total polyphenol content (0.132 ± 0.003 mg GAE/100 mL), total flavonoid content (13.179 ± 0.002 mg CE/100 mL), and ascorbic acid (1.07 ± 0.06 mg/100 mL). These results show that the combination of UV-C and edible coating as a hurdle treatment could be an innovative method to preserve shelf life and quality of fruits.

Continuous Flow UV-C Irradiation Effects on the Physicochemical Properties of Aloe vera Gel and Pitaya (Stenocereus spp.) Blend

Physicochemical properties of a blend of 10% Aloe vera gel with 5% pitaya juice subjected to UV-C doses of 16.5, 27.7, and 40 mJ/cm2 were evaluated at pH 3.5 and 5.5. Unprocessed treatments were used as the control. The a* color parameter decreased and luminosity increased at pH 3.5. The decrease in the reddish color was consistent with the decrease in total betalains content and stabilized at pH 5.5. The NMR analyses of UV-C treatments showed changes in betalains signal patterns. Polyphenolics content was significantly reduced in the UV-C treatments at pH 5.5. UV-C processing decreased the antioxidant activity 1.25 times compared to unprocessed treatments. Total sugar content was reduced as the UV-C dose increased. Doses above 16.5 mJ/cm2 resulted in a higher simple sugar content at a pH 3.5. The UV-C continuous flow technology can be applied to stabilize betalains in Aloe vera-pitaya blends at a UV-C dose of 16.5 mJ/cm2 and pH 5.5.

Development and quality assessment of a turbid carrot-orange juice blend processed by UV-C light assisted by mild heat and addition of Yerba Mate (Ilex paraguariensis) extract

Carrot-orange juice processed by UV-C (10.6 kJ/m²) assisted with mild heat (H, 50 °C) and yerba mate addition (E) was obtained. UV-C/H + E treated juice was examined for native flora, polyphenol content (PC), total antioxidant activity (TAA), colour, turbidity, °Brix and pH along storage (4 °C). Consumer profiling studies were performed. UV-C/H + E provoked 2.6-5.7 native flora log reductions, preventing from recovery during 24 day-storage. The UV-C/H + E juice exhibited a significant increase in PC (720.2 µg/mL) and TAA (5.5 mg/mL) compared to untreated (PC = 205.0 µg/mL/TAA = 0.7 mg/mL) and single treated juices (PC = 302.1-408.0 µg/mL/TAA = 0.7-2.4 mg/mL), remaining constant throughout storage. UV-C/H + E juice exhibited scarce changes in colour. Nevertheless, increases in °Brix and turbidity were observed compared to single treatments. A cluster sensory analysis revealed that one group showed a marked interest in UVC/H + E beverages with herbal taste and strong aroma. CATA question revealed that some improvements should be introduced in order to satisfy the consumers' ideally beverage.

High intensity light pulses to reduce microbial load in fresh cheese

The present study focused on the utilisation of High Intensity Light Pulses (HILP) treatment to preserve mozzarella cheese. First, the susceptibility of Pseudomonas fluorescens and Enterobacteriaceae to HILP (fluences from 0·39 to 28·0 J/cm2) in a transparent liquid was evaluated (in-vitro tests). Afterwards, the effects on inoculated mozzarella cheese were also assessed. Then untreated (Control) and HILP treated samples were packaged and stored at 10 °C for 2 weeks. Enterobacteriaceae, Pseudomonas spp. and pH were monitored during storage. In a transparent liquid (in-vitro tests) there was a significant microbial inactivation just with 2 s of treatment. On the inoculated cheese a relevant microbial reduction of about 1 log cycle was observed, according to the exposure to the treatments. For Pseudomonas spp. in particular, in the treated samples, the microbiological acceptability limit (106 cfu/g) was never reached after 2 weeks of refrigerated storage. To sum up, the efficacy of this treatment is very interesting because a microbial reduction was observed in treated samples. HILP treatment is able to control the microbial growth and may be considered a promising way to decontaminate the surface of mozzarella cheese.

Targeted use of LEDs in improvement of production efficiency through phytochemical enrichment

Based on available literature, ecology and economy of light emitting diode (LED) lights in plant foods production were assessed and compared to high pressure sodium (HPS) and compact fluorescent light (CFL) lamps. The assessment summarises that LEDs are superior compared to other lamp types. LEDs are ideal in luminous efficiency, life span and electricity usage. Mercury, carbon dioxide and heat emissions are also lowest in comparison to HPS and CFL lamps. This indicates that LEDs are indeed economic and eco-friendly lighting devices. The present review indicates also that LEDs have many practical benefits compared to other lamp types. In addition, they are applicable in many purposes in plant foods production. The main focus of the review is the targeted use of LEDs in order to enrich phytochemicals in plants. This is an expedient to massive improvement in production efficiency, since it diminishes the number of plants per phytochemical unit. Consequently, any other production costs (e.g. growing space, water, nutrient and transport) may be reduced markedly. Finally, 24 research articles published between 2013 and 2017 were reviewed for targeted use of LEDs in the specific, i.e. blue range (400-500 nm) of spectrum. The articles indicate that blue light is efficient in enhancing the accumulation of health beneficial phytochemicals in various species. The finding is important for global food production. © 2017 Society of Chemical Industry.

Effect of ultrasound on some chemical and microbiological properties of sour cherry juice by response surface methodology

In this study, it is aimed to determine effect of ultrasonication on some chemical and microbiological properties of sour cherry juice by response surface methodology, since ultrasound is known as an alternative method for thermal food processing. Sour cherry juice was sonicated at varying amplitude levels (50, 75, 100%); moderate temperatures (20, 30, 40 ℃); and treatment times of 2, 6, 10 min at a constant frequency of 20 kHz. Different ultrasonication amplitudes, temperatures, and times had no significant effect on pH,°Bx, and titratable acidity. A significant increase in total monomeric anthocyanins was observed as the amplitude level and temperature increased (p < 0.01). An increase in the total phenolics was also obtained as the temperature increased (p < 0.05). The effect of amplitude level on antioxidant capacity of sour cherry juice was also found significant (p < 0.05). Color parameters (L*, a*, b*, C, h) generally increased by increasing temperature, amplitude level, and treatment time. It was determined that Escherichia coli O157:H7 significantly affected by temperature and treatment time (p < 0.05).