Influence of ultrasonic treatment on the structure and emulsifying properties of peanut protein isolate

Investigating the impact of ultrasound on the structural, physicochemical, and emulsifying characteristics of Dioscorin: Insights from experimental data and molecular dynamics simulation

This study investigated the impact of ultrasound treatment on dioscorin, the primary storage protein found in yam tubers. Three key factors, namely ultrasound power, duration, and frequency, were focused on. The research revealed that ultrasound-induced cavitation effects disrupted non-covalent bonds, resulting in a reduction in α-helix and β-sheet contents, decreased thermal stability, and a decrease in the apparent hydrodynamic diameter (Dh) of dioscorin. Additionally, previously hidden amino acid groups within the molecule became exposed on its surface, resulting in increased surface hydrophobicity (Ho) and zeta-potential. Under specific ultrasound conditions (200 W, 25 kHz, 30 min), Dh decreased while Ho increased, facilitating the adsorption of dioscorin molecules onto the oil-water interface. Molecular dynamics (MD) simulations showed that at lower frequencies and pressures, the structural flexibility of dioscorin's main chain atoms increased, leading to more significant fluctuations between amino acid residues. This transformation improved dioscorin's emulsifying properties and its oil-water interface affinity.

Experimental investigation into the implications of low-intensity magnetic field treatment on the structural and functional properties of rapeseed meal during biofermentation

The functionality of rapeseed meal is limited, to acquire more utilization, the functional attributes were improved by altering its structural features using magnetic field-assisted solid fermentation. The magnetic treatment was performed every 24 h (specifically at 24, and 48 h), each treatment having a duration of 4 h. The magnetic intensity was set at 120 Gs, and the fermentation temperature 37 °C. Magnetic field-assisted solid fermentation resulted in higher surface hydrophobicity, fluorescence intensity, UV absorption, and sulfhydryl groups of rapeseed meal. Magnetic field treatment considerably enhanced solubility, antioxidant activity, emulsifying activity, and stability by 8.8, 19.5, 20.7, and 12.3 %, respectively. Magnetic field-assisted solid fermentation also altered rapeseed meal structure, as shown by scanning electron microscopy, atomic force microscopy, and Raman spectroscopy outcomes. Correlation analysis displayed positive interrelationships between functional characteristics, and surface hydrophobicity, β-sheets, and polydispersity index.

Encapsulation of Lactobacillus plantarum in W1/O/W2 double emulsions stabilized with the high-intensity ultrasound-treated pea protein and pectin

This study focuses on developing a water-in-oil-in-water (W1/O/W2) double emulsion system using high-intensity ultrasound (HIU)-treated pea protein isolate (HIU-PPI) and pectin to encapsulate Lactobacillus plantarum (L. plantarum). The effects of ultrasound treatment on pea protein isolate (PPI) characteristics such as solubility, particle size, emulsification, surface hydrophobicity, and surface free sulfhydryl group were examined, determining optimal HIU processing conditions was 400 W for 10 min. The developed W1/O/W2 double emulsion system based on HIU-PPI demonstrated effective encapsulation and protection of L. plantarum, especially at the HIU-PPI concentration of 4 %, achieving an encapsulation efficiency of 52.65 %. Incorporating both HIU-PPI and pectin as emulsifiers increased the particle size and significantly enhanced the emulsion's viscosity. The highest bacterial encapsulation efficiency of the emulsion, 59.94 %, was attained at a HIU to pectin concentration ratio of 3:1. These emulsions effectively encapsulate and protect L. plantarum, with the concentration of HIU-PPI being a critical factor in enhancing probiotic survival under simulated gastrointestinal digestion. However, the concurrent utilization of pectin and HIU-PPI as emulsifiers did not provide a notable advantage compared to the exclusive use of HIU-PPI in enhancing probiotic viability during in vitro simulated digestion. This research offers valuable perspectives for the food industry on harnessing environmentally friendly, plant-based proteins as emulsifiers in probiotic delivery systems. It underscores the potential of HIU-modified pea protein and pectin in developing functional food products that promote the health benefits of probiotics.

Effect of dual physical modifications on structural and functional properties of gluten and whey protein: Ultrasound and microwave

In this study, the effect of dual modification using ultrasound (100 and 300 W for 5, 10, and 15 min) and microwave (600 W for 45 s) treatments on functional properties of wheat gluten protein (WGP) and whey protein concentrate (WPC), as two by-products of food industry with different primary functional properties, was investigated. Ultrasound treatment did not affect the solubility of both proteins significantly but the emulsion and foam properties were increased up to 10 min. Nevertheless, microwave treatment after ultrasound caused a significant decrease in the solubility of both proteins. However, the foam stability of the WPC and WGP was not significantly modified after microwave treatment. The obtained results showed a more positive effect of ultrasound at 100 W for 10 min than other ultrasound treatments on the functional and structural properties of both proteins. The zeta potential of both proteins was decreased after dual physical modifications, but thermal stability of proteins was improved after microwave treatment.

Effects of pH-shifting and ultrasound on the structural and emulsifying properties of peanut globulin fractions

This work investigated and compared the structural and emulsifying properties of peanut globulin fractions (conarachin and arachin) after ultrasonication (US) and pH2.5-shifting treatments, singly and in combination. Results showed that pH2.5-shifting was more effective in degrading peanut protein subunits and unfolding their structures than US treatment. Conarachin tended to aggregate during US and pH2.5-shifting treatments possibly due to higher free sulfhydryl content, while high molecular weight arachin tended to disaggregate during these treatments. pH2.5-shifting or US+pH2.5-shifting treatments significantly increased the surface hydrophobicity of conarachin (from 72 to 314) and arachin (from 336 to 888), which may be responsible for the enhancement of protein emulsifying activity. All treatments significantly improved the physical stability of arachin-stabilized emulsions with higher absolute potentials but lowered that of conarachin-stabilized emulsions. However, pH2.5-shifting or US+pH2.5-shifting treatments could improve the stability of conarachin-stabilized emulsions in the presence of salts.

Enrichment of Trypsin Inhibitor from Soybean Whey Wastewater Using Different Precipitating Agents and Analysis of Their Properties

Recovering valuable active substances from the by-products of agricultural processing is a crucial concern for scientific researchers. This paper focuses on the enrichment of soybean trypsin inhibitor (STI) from soybean whey wastewater using either ammonium sulfate salting or ethanol precipitation, and discusses their physicochemical properties. The results show that at a 60% ethanol content, the yield of STI was 3.983 mg/mL, whereas the yield was 3.833 mg/mL at 60% ammonium sulfate saturation. The inhibitory activity of STI obtained by ammonium sulfate salting out (A-STI) was higher than that obtained by ethanol precipitation (E-STI). A-STI exhibited better solubility than E-STI at specific temperatures and pH levels, as confirmed by turbidity and surface hydrophobicity measurements. Thermal characterization revealed that both A-STI and E-STI showed thermal transition temperatures above 90 °C. Scanning electron microscopy demonstrated that A-STI had a smooth surface with fewer pores, while E-STI had a rough surface with more pores. In conclusion, there was no significant difference in the yield of A-STI and E-STI (p < 0.05); however, the physicochemical properties of A-STI were superior to those of E-STI, making it more suitable for further processing and utilization. This study provides a theoretical reference for the enrichment of STI from soybean whey wastewater.

High internal phase Pickering emulsions stabilized by the complexes of ultrasound-treated pea protein isolate/mung bean starch for delivery of β-carotene

High internal phase Pickering emulsions (HIPPEs) stabilized by edible colloid particles have gained great interest. In this study, ultrasound-treated pea protein isolate and mung bean starch complexes (UPPI/MS) were prepared and used in stabilization of HIPPEs. The emulsifying properties of UPPI/MS were found to be superior to those of pea protein isolate (PPI), as evidenced by a smaller particle size and higher surface hydrophobicity. HIPPEs stabilized by UPPI/MS displayed a higher viscoelastic and gel-like structure. Low-Field NMR (LF-NMR) revealed that HIPPEs stabilized by UPPI60/MS (UPPI60/MS-HIPPEs) showed better ability to restrict the mobility of water. UPPI60/MS-HIPPEs also revealed the best environmental stability attributed a stronger three-dimensional network structure. Encapsulation of β-carotene within HIPPEs resulted in improving stability, with UPPI60/MS-HIPPEs exhibiting the highest retention rate of 73.58 %. Moreover, β-carotene encapsulated in HIPPEs displayed enhanced bioaccessibility, with UPPI60/MS-HIPPEs achieving the highest value of 25.37 %. This research highlighted the potential of UPPI60/MS complexes as effective stabilizers for HIPPEs and provided new insights on HIPPEs in nutrient delivery systems.

Effect of magnetic field-assisted fermentation on the in vitro protein digestibility and molecular structure of rapeseed meal

BACKGROUND

There has been a significant growth in demand for plant-derived protein, and this has been accompanied by an increasing need for sustainable animal-feed options. The aim of this study was to investigate the effect of magnetic field-assisted solid fermentation (MSSF) on the in vitro protein digestibility (IVPD) and functional and structural characteristics of rapeseed meal (RSM) with a mutant strain of Bacillus subtilis.

RESULTS

Our investigation demonstrated that the MSSF nitrogen release rate reached 86.3% after 96 h of fermentation. The soluble protein and peptide content in magnetic field feremented rapeseed meal reached 29.34 and 34.49 mg mL-1 after simulated gastric digestion, and the content of soluble protein and peptide in MF-FRSM reached 61.81 and 69.85 mg mL-1 after simulated gastrointestinal digestion, which significantly increased (p > 0.05) compared with the fermented rapeseed meal (FRSM). Studies of different microstructures - using scanning electron microscopy (SEM) and atomic force microscopy (AFM) - and protein secondary structures have shown that the decline in intermolecular or intramolecular cross-linking leads to the relative dispersion of proteins and improves the rate of nitrogen release. The smaller number of disulfide bonds and conformational alterations suggests that the IVPD of RSM was improved.

CONCLUSIONS

Magnetic field-assisted solid fermentation can be applied to enhance the nutritional and protein digestibility of FRSM. © 2024 Society of Chemical Industry.

Canola Seed Protein: Pretreatment, Extraction, Structure, Physicochemical and Functional Characteristics

The rapid growth of the global population has led to an unprecedented demand for dietary protein. Canola seeds, being a widely utilized oil resource, generate substantial meal by-products following oil extraction. Fortunately, canola meals are rich in protein. In this present review, foremost attention is directed towards summarizing the characteristics of canola seed and canola seed protein. Afterwards, points of discussion related to pretreatment include an introduction to pulsed electric field treatment (PEF), microwave treatment (MC), and ultrasound treatment (UL). Then, the extraction method is illustrated, including alkaline extraction, isoelectric precipitation, acid precipitation, micellization (salt extraction), and dry fractionation and tribo-electrostatic separation. Finally, the structural complexity, physicochemical properties, and functional capabilities of rapeseed seeds, as well as the profound impact of various applications of rapeseed proteins, are elaborated. Through a narrative review of recent research findings, this paper aims to enhance a comprehensive understanding of the potential of canola seed protein as a valuable nutritional supplement, highlighting the pivotal role played by various extraction methods. Additionally, it sheds light on the broad spectrum of applications where canola protein demonstrates its versatility and indispensability as a resource.

Conjugation of Soybean Proteins 7S/11S Isolate with Glucose/Fructose in Gels through Wet-Heating Maillard Reaction

Conjugation with glucose (G) and fructose (F) via the Maillard reaction under the wet-heating condition is a natural and non-toxic method of improving the technological functions of 7S/11S proteins in different kinds of gels. It may be used as an affordable supply of emulsifiers and an excellent encapsulating matrix for gels. This study aimed to create a glucose/fructose-conjugated 7S/11S soy protein via the Maillard reaction. The conjugation was confirmed by determining the SDS-PAGE profile and circular dichroism spectra. In addition, these conjugates were comprehensively characterized in terms of grafting degree, browning degree, sulfhydryl content, surface hydrophobicity (H0), and differential scanning calorimetry (DSC) through various reaction times (0, 24, 48, and 72 h) to evaluate their ability to be used in food gels. The functional characteristics of the 7S/11S isolate-G/F conjugate formed at 70 °C, with a high degree of glycosylation and browning, were superior to those obtained at other reaction times. The SDS-PAGE profile indicated that the conjugation between the 7S and 11S proteins and carbohydrate sources of G and F through the Maillard reaction occurred. Secondary structural results revealed that covalent interactions with G and F affected the secondary structural components of 7S/11S proteins, leading to increased random coils. When exposed to moist heating conditions, G and F have significant potential for protein alteration through the Maillard reaction. The results of this study may provide new insights into protein modification and establish the theoretical basis for the therapeutic application of both G and F conjugation with soy proteins in different food matrixes and gels.

Effect of ultrasonic frequency on the structural and functional properties of pea protein isolation

BACKGROUND

Pea protein, as a by-product of peas (Pisum sativum L.), is rich in a variety of essential amino acids that can meet the body's protein needs and is a valuable source of protein. Since the function of pea protein is closely related to its structure, pea protein has been subjected to different modifications in recent years to improve its application in food and to develop new products.

RESULTS

The effects of sonication frequency (primary and secondary time) on pea protein isolate's (PPI's) structural and functional properties were investigated. Sodium dodecyl sulfate polyacrylamide gel electrophoresis demonstrated that different sonication frequencies at the same power (600 W) treatment had no effect on PPI's molecular weight. Fourier-transform infrared spectroscopy revealed that treatment at different sonication frequencies caused secondary structural changes in PPI. The particle size distribution, foaming, stability, surface hydrophobicity, emulsification, and oxidation resistance of PPI were improved after primary and secondary sonication, but secondary sonication was not more effective than primary sonication for an extended period of time.

CONCLUSION

Overall, ultrasound is able to improve the structural and functional properties of pea proteins within a suitable range. It provides a theoretical basis for elucidating the modification of the structure and function of plant proteins by ultrasound and lays the foundation for the development of plant proteins in food applications as well as development. © 2023 Society of Chemical Industry.

Changes in the structure and hydration properties of high-temperature peanut protein induced by cold plasma oxidation

To improve the hydration properties of high-temperature pressed peanut protein isolate (HPPI), we investigated the effect of cold plasma (CP) oxidation on functional and structural properties. Compared to HPPI, the hydrated molecules number and the surface contact angle were significantly decreased at 70 W, from 77.2 × 109 to 17.7 × 109 and from 85.74° to 57.81°, respectively. The reduction of the sulfhydryl content and the increase of the disulfide bond and di-tyrosine content indicated that the structural transformation was affected by the oxidation effect. In terms of structural changes, a stretched tertiary structure, ordered secondary structure, and rough apparent structure were observed after CP treatment. Additionally, the enhancement of surface free energy and group content such as -COOH, -CO and -OH on the surface of HPPI contributed to the formation of hydrated crystal structures. In general, the oxidation effect of CP effectively improved the hydration properties of HPPI and broaden its application field.

Comprehensive binding analysis of glycated myosin with furan derivatives via glucose by means of multi-spectroscopy techniques and molecular docking simulation

Myosin is an ideal binding receptor for aroma compounds and its functional properties are easily affected by glucose. The study comprehensively clarified the effects of glucose glycation-induced structural modifications of myosin on its binding ability with furan derivatives, including 2-methylfuran, 2-furfural, and 2-furfurylthiol. The results demonstrated that the binding levels of furan derivatives were obviously affected by the glycation levels of myosin due to the changes of myosin structure and surface. The increased glycation levels caused the unfolding of myosin structure and accelerated the aggregation, as were exhibited by the data of zeta potential, particle size, microstructure, and secondary structure. The glycated myosin with wrinkled surfaces favored the significant increase of hydrophobic interactions (31.59-69.50 μg), the more exposure of amino acid residues (3459-6048), the formation of free sulfhydryl groups (16.37-20.58 mmol/104g) and hydrogen bonds. These key (non)covalent linkages accounted for the generation of glycated myosin-odorants complex, including 2-furfurylthiol (29.17-47.87 %), thus enhancing the resultant binding ability as evidenced by the free furan derivatives concentrations, fluorescence quenching and molecular docking simulation analysis. The glycated myosin for 8 h bound highest concentrations of furan derivatives. The results will provide comprehensive data on the retention of aroma compounds in meat products.

Ultrasonic and homogenization: An overview of the preparation of an edible protein-polysaccharide complex emulsion

Emulsion systems are extensively utilized in the food industry, including dairy products, such as ice cream and salad dressing, as well as meat products, beverages, sauces, and mayonnaise. Meanwhile, diverse advanced technologies have been developed for emulsion preparation. Compared with other techniques, high-intensity ultrasound (HIUS) and high-pressure homogenization (HPH) are two emerging emulsification methods that are cost-effective, green, and environmentally friendly and have gained significant attention. HIUS-induced acoustic cavitation helps in efficiently disrupting the oil droplets, which effectively produces a stable emulsion. HPH-induced shear stress, turbulence, and cavitation lead to droplet disruption, altering protein structure and functional aspects of food. The key distinctions among emulsification devices are covered in this review, as are the mechanisms of the HIUS and HPH emulsification processes. Furthermore, the preparation of emulsions including natural polymers (e.g., proteins-polysaccharides, and their complexes), has also been discussed in this review. Moreover, the review put forward to the future HIUS and HPH emulsification trends and challenges. HIUS and HPH can prepare much emulsifier-stable food emulsions, (e.g., proteins, polysaccharides, and protein-polysaccharide complexes). Appropriate HIUS and HPH treatment can improve emulsions' rheological and emulsifying properties and reduce the emulsions droplets' size. HIUS and HPH are suitable methods for developing protein-polysaccharide forming stable emulsions. Despite the numerous studies conducted on ultrasonic and homogenization-induced emulsifying properties available in recent literature, this review specifically focuses on summarizing the significant progress made in utilizing biopolymer-based protein-polysaccharide complex particles, which can provide valuable insights for designing new, sustainable, clean-label, and improved eco-friendly colloidal systems for food emulsion. PRACTICAL APPLICATION: Utilizing complex particle-stabilized emulsions is a promising approach towards developing safer, healthier, and more sustainable food products that meet legal requirements and industrial standards. Moreover, the is an increasing need of concentrated emulsions stabilized by biopolymer complex particles, which have been increasingly recognized for their potential health benefits in protecting against lifestyle-related diseases by the scientific community, industries, and consumers.

Comparison of ovalbumin glycation induced by high-temperature steaming and high-temperature baking: A study combining conventional spectroscopy with high-resolution mass spectrometry

High-temperature steaming (HTS) and high-temperature baking (HTB)-induced ovalbumin (OVA)-glucose glycation (140 °C, 1-3 min) were compared, and the different mechanisms were evaluated by changes in protein conformation, glycation sites and average degree of substitution per peptide molecule (DSP) values as well as the antioxidant activity of glycated OVA. Conventional spectroscopic results suggested that in comparison with HTB, HTS promoted protein expansion, increased β-sheet content and made OVA structure more orderly. Liquid chromatography-high resolution mass spectrometry (LC-HRMS) analysis showed that 10 glycation sites were found under HTB, while 4 new glycation sites R111, R200, R219 and K323 appeared under HTS, and 2 of them (R219 and K323) were located in internal β-sheet chains. The antioxidant activities of glycated OVA increased with increasing treatment time, and HTS showed stronger enhancement effect than HTB. Furthermore, the DSP values were generally higher under HTS than HTB. Compared with HTB, HTS with high penetrability could enhance the change of OVA primary structure and spatial conformation, making the protein structure more unfolded and stable, leading to more protein-sugar collisions occurred in inner OVA molecular and significantly promoted glycation. In conclusion, HTS is a promising method for high-temperature short-time glycation reaction, with drastically increasing the protein antioxidant activities.

Non-thermal techniques as an approach to modify the structure of milk proteins and improve their functionalities: a review of novel preparation

BACKGROUND

Milk proteins (MPs) have been widely used in the food industry due to their excellent functionalities. However, MPs are thermal-unstable substances and their functional properties are easily affected by heat treatment. Emerging non-thermal approaches (i.e., high-pressure homogenization (HPH), ultrasound (US), pulsed electric field (PEF)) have been increasingly popular. A detailed understanding of these approaches' impacts on the structure and functionalities of MPs can provide theoretical guidance for further development to accelerate their industrialization.

SCOPE AND APPROACH

This review assesses the mechanisms of HPH, US and PEF technologies on the structure and functionalities of MPs from molecular, mesoscopic and macroscopic levels, elucidates the modifications of MPs by these theologies combined with other methods, and further discusses their existing issues and the development in the food filed.

KEY FINDINGS AND CONCLUSIONS

The structure of MPs changed after HPH, US and PEF treatment, affecting their functionalities. The changes in these properties of MPs are related to treated-parameters of used-technologies, the concentration of MPs, as well as molecular properties. Additionally, these technologies combined with other methods could obtain some outstanding functional properties for MPs. If properly managed, these theologies can be tailored for manufacturing superior functional MPs for various processing fields.

Ultrasonic treatment of rice bran protein-tannic acid stabilized oil-in-water emulsions: Focus on microstructure, rheological properties and emulsion stability

Rice bran protein (RBP)-tannic acid (TA) complex was prepared and the RBP-TA emulsions were subjected to ultrasonic treatment with different powers. Ultrasonic treatment has a positive effect on improving the properties of RBP-TA emulsion. This study investigated the influence of different ultrasonic power levels on the physicochemical properties, microstructure, rheological properties, and stability of emulsions containing RBP-TA. Under the ultrasonic treatment of 400 W, the particle size, zeta potential, and adsorbed protein content of the RBP-TA emulsion were 146.86 nm, -20.7 eV, and 61.91%, respectively. At this time, the emulsion had the best emulsifying properties, apparent viscosity, energy storage modulus and loss modulus. In addition, the POV and TBARS values of RBP-TA emulsions were 6.12 and 7.60 mmol/kg, respectively. The thermal, salt ion, pH and oxidative stability of the emulsions were investigated, and it was shown that ultrasonic treatment was effective in improving the stability of RBP-TA emulsions.

Demulsification of Emulsion Using Heptanoic Acid during Aqueous Enzymatic Extraction and the Characterization of Peanut Oil and Proteins Extracted

Peanut oil body emulsion occurs during the process of aqueous enzymatic extraction (AEE). The free oil is difficult to release and extract because its structure is stable and not easily destroyed. Demulsification can release free oil in an oil body emulsion, so various fatty acids were selected for the demulsification. Changes in the amount of heptanoic acid added, solid-liquid ratio, reaction temperature, and reaction time were adopted to investigate demulsification, and the technological conditions of demulsification were optimized. While the optimal conditions were the addition of 1.26% of heptanoic acid, solid-liquid ratio of 1:3.25, reaction temperature of 72.7 °C, and reaction time of 55 min, the maximum free oil yield was (95.84 ± 0.19)%. The analysis of the fatty acid composition and physicochemical characterization of peanut oils extracted using four methods were studied during the AEE process. Compared with the amount of oil extracted via other methods, the unsaturated fatty acids of oils extracted from demulsification with heptanoic acid contained 78.81%, which was significantly higher than the other three methods. The results of physicochemical characterization indicated that the oil obtained by demulsification with heptanoic acid had a higher quality. According to the analysis of the amino acid composition, the protein obtained using AEE was similar to that of commercial peanut protein powder (CPPP). However, the essential amino acid content of proteins extracted via AEE was significantly higher than that of CPPP. The capacity of water (oil) holding, emulsifying activity, and foaming properties of protein obtained via AEE were better than those for CPPP. Overall, heptanoic acid demulsification is a potential demulsification method, thus, this work provides a new idea for the industrial application of simultaneous separation of oil and proteins via AEE.

Chayote (Sechium edule (Jacq.) Swartz) Seed as an Unexploited Protein Source: Bio-Functional and Nutritional Quality of Protein Isolates

Chayote seeds have good protein quality and recognized bioactive properties, being still unexplored as a nutraceutical. In this work, chayote seed protein isolates (CSPIs) were prepared by alkaline extraction (AE) and ultrasonic-assisted extraction (UAE) using a probe (20 kHz) or a water bath (40 kHz), and their physicochemical, functional properties and nutraceutical potential were investigated. For all treatments, protein solutions (10% w/v) were treated for 20 min. The UAE significantly (p < 0.05) improved the protein extraction yield and functional properties (protein solubility, turbidity, and emulsifying and foaming properties) of CSPIs. This effect was more pronounced using a probe sonication device. The CSPI obtained by UAE-20 kHz contained 8.2 ± 0.9% dw of proteins with a balanced amino acid profile, higher content of essential amino acids (315.63 mg/g of protein) and higher protein digestibility (80.3 ± 4.5%). Furthermore, CSPI.UAE-20 kHz exhibited the highest phenolic content (7.22 mg GAE/g dw), antioxidant capacity and α-amylase inhibition (74%, at 100 μg/mL concentration). Overall, these results suggest that ultrasound technology contributed greatly to the corresponding functional and nutritional properties of chayote seed proteins. It would be, therefore, useful to apply this Cucurbitaceae species in food systems, promoting its nutritional and commercial value.

The Structural Characteristics and Bioactivity Stability of Cucumaria frondosa Intestines and Ovum Hydrolysates Obtained by Different Proteases

The study aimed to investigate the effects of alcalase, papain, flavourzyme, and neutrase on the structural characteristics and bioactivity stability of Cucumaria frondosa intestines and ovum hydrolysates (CFHs). The findings revealed that flavourzyme exhibited the highest hydrolysis rate (51.88% ± 1.87%). At pH 2.0, the solubility of hydrolysate was the lowest across all treatments, while the solubility at other pH levels was over 60%. The primary structures of hydrolysates of different proteases were similar, whereas the surface hydrophobicity of hydrolysates was influenced by the types of proteases used. The hydrolysates produced by different proteases were also analyzed for their absorption peaks and antioxidant activity. The hydrolysates of flavourzyme had β-fold absorption peaks (1637 cm^-1), while the neutrase and papain hydrolysates had N-H bending vibrations. The tertiary structure of CFHs was unfolded by different proteases, exposing the aromatic amino acids and red-shifting of the λ-peak of the hydrolysate. The alcalase hydrolysates showed better antioxidant activity in vitro and better surface hydrophobicity than the other hydrolysates. The flavourzyme hydrolysates displayed excellent antioxidant stability and pancreatic lipase inhibitory activity during gastrointestinal digestion, indicating their potential use as antioxidants in the food and pharmaceutical industries.

Structural and functional properties of self-assembled peanut protein nanoparticles prepared by ultrasonic treatment: Effects of ultrasound intensity and protein concentration

Peanut protein isolate (PPI) nanoparticles were prepared by self-assembly under the combined action of ultrasound (US) and protein concentration. The effects of ultrasound intensity (150-500 W) and protein concentration (1-12 %, w/v) on the structural and functional properties of PPI nanoparticles were investigated. Low-intensity US significantly increased the particle size of PPI, but high-intensity US decreased it. The largest PPI nanoparticles were obtained when 10 % PPI was subjected to low-intensity US treatment (200 W for 5 min). These nanoparticles possessed unique structural characteristics, such as the lowest absolute ζ-potential and the highest contents of exposed free sulfhydryl and disulfide bond, which may be responsible for their excellent heat-set gelling properties. The 12 % PPI treated with low- and high-intensity US had the highest emulsifying activity index and emulsifying stability index, respectively. The self-assembled PPI nanoparticles induced by US treatments at high protein concentrations have great potentials for application in the food industry.

Emulsifying properties of wheat germ protein: Effect of different ultrasonic treatment

The effect of ultrasonic treatment on emulsifying properties of wheat germ protein (WGP) was studied in this paper. WGP was subjected to low frequency (20 kHz), high intensity ultrasonic treatment at different power (200, 400, 600, 800 W) for 10 min, or different time (2, 4, 6, 8, 10, 15, 20 min) at 400 W. The emulsifying activity index and emulsion stability index of WGP were significantly improved, and the emulsion droplet was smaller and more uniform after ultrasound treatment. Ultrasound increased the adsorbed WGP concentration at the oil-water interface and reduced the interfacial tension, which explained the improved emulsifying properties of WGP. The investigation on molecular properties and protein conformation showed that ultrasound processing increased solubility, but decreased particle size and surface charge of WGP. Ultrasound processing resulted in the unfolding of the protein molecular structure indicated by the increase of surface hydrophobicity and surface free sulfhydryl group levels, and the decrease of intrinsic fluorescence intensity. Correlation analysis showed that the changes in WGP solubility, particle size, and surface hydrophobicity were the main driven factors for the improved emulsifying properties of WGP.

Fabrication and characterization of succinylated and glycosylated soy protein isolate and its self-assembled nanogel

In this study, we used succinic anhydride (SA) acylation and dextran (DX) glycosylation modified soybean isolate protein (SPI) to develop self-assembled SPI-SA-DX adduct-based nanogels. Degree of modification, SDS-PAGE, and FT-IR studies showed that the amino group of the SPI was replaced by hydrophilic dextran and succinic acid carboxyl groups. Dextran chain and anhydride group attachment to the soybean protein surface enhanced hydrophilicity and spatial site blocking. Modification-induced protein structure unfolding, free sulfhydryl groups to be converted to disulfide bonds, and reduced surface hydrophobicity (H₀). H₀ was lowest at 33,750 ± 1008.29 when SA content = 10 % protein content (SPI-SA₃-DX). The nanometer gel based on SPI-SA₃-DX had the maximum turbidity and clear transparent solution without precipitation. Its particle size and polymer dispersibility index (PDI) were also the smallest, with values of (106.87 ± 4.51) nm and 0.21 ± 0.009, respectively. Transmission electron microscopy showed that nanogels had subspherical shell-core structures. Nanogels were stable under different pH, ionic strength, high temperature, and storage conditions.

Modifications to functional and biological properties of proteins of cowpea pulse crop by ultrasound-assisted extraction

Natural resource depletion, negative environmental effects and the challenge to secure global food security led to the establishment of the Sustainable Development Goals (SDGs). In need to explore underutilized sustainable protein sources, this study aims at isolating protein from cowpea by ultrasound-assisted extraction (UAE), where the techno-functional characteristics of the protein isolates were studied at different sonication conditions i.e., 100 W and 200 W at processing times ranging from 5 to 20 min. The US at 200 W-10 min produced the optimal results for all properties. In this process combination, there was an increase in protein yield, solubility, water-holding capacity, foaming capacity and stability, emulsion activity and stability, zeta-potential, and in-vitro protein digestibility from 31.78% to 58.96%, 57.26% to 68.85%, 3.06 g/g to 3.68 g/g 70.64% to 83.74%, 30.76% to 60.01%, 47.48% to 64.26%, 56.59% to 87.71%, -32.9 mV to -44.2 mV and 88.27% to 89.99%, respectively and particle size dropped from 763 nm to 559 nm in comparison to control. The microstructure and secondary-structure alterations of proteins caused by sonication were validated by SEM images, SDS-PAGE, and FTIR analyses. Sonication leads to acoustic cavitation and penetrate the cell walls, improving extraction from the solid to liquid phase. After sonication, the hydrophobic protein groups were exposed and proteins were partially denatured which increased its functionality. The findings demonstrated that UAE of cowpea protein improved yield, modify characteristics to fit the needs of the food industry, and contribute to achieving SDGs 2, 3, 7, 12, and 13.

Characteristics and antioxidant properties of Harpadon nehereus protein hydrolysate-xylose conjugates obtained from the Maillard reaction by ultrasound-assisted wet heating in a natural deep eutectic solvents system

BACKGROUND

Harpadon nehereus is a high-protein marine fish. A valuable way to add value to H. nehereus is to convert it into protein hydrolysate. The Maillard reaction is an effective way to improve the functional properties of peptides and proteins, which are affected by many factors such as reactant concentration, water activity, pH, temperature, and heating time. However, the traditional Maillard reaction method is inefficient. The purpose of this study was therefore to explore the effect of the ultrasound-assisted wet heating method on the Maillard reaction of H. nehereus protein hydrolysate (HNPH) in a new-type green solvent - a natural hypereutectic solvent (NADES).

RESULTS

Harpadon nehereus protein hydrolysate-xylose (Xy) conjugates were prepared via a Maillard reaction in a NADES system using an ultrasound-assisted wet heating method. The effects of different treatment conditions on the Maillard reaction were studied. The optimized glycation degree (DG) of HNPH-Xy conjugates was obtained with a water content of 10%, a reaction temperature of 80 °C, a reaction time of 35 min, and an ultrasonic power level of 300 W. Compared with HNPH, the structure of HNPH-Xy conjugates were significantly changed. Moreover, the functional properties and antioxidant activity of HNPH-Xy were all superior to the HNPH.

CONCLUSIONS

An ultrasound-assisted wet-heating Maillard reaction between HNPH and Xy in the NADES system could be a promising way to improve the functional properties of HNPH. © 2023 Society of Chemical Industry.

Allergenicity of peanut allergens and its dependence on the structure

Food allergies are a global food safety problem. Peanut allergies are common due, in part, to their popular utilization in the food industry. Peanut allergy is typically an immunoglobulin E-mediated reaction, and peanuts contain 17 allergens belonging to different families in peanut. In this review, we first introduce the mechanisms and management of peanut allergy, followed by the basic structures of associated allergens. Subsequently, we summarize methods of epitope localization for peanut allergens. These methods can be instrumental in speeding up the discovery of allergenicity-dependent structures. Many attempts have been made to decrease the allergenicity of peanuts. The structures of hypoallergens, which are manufactured during processing, were analyzed to strengthen the desensitization process and allergen immunotherapy. The identification of conformational epitopes is the bottleneck in both peanut and food allergies. Further, the identification and modification of such epitopes will lead to improved strategies for managing and preventing peanut allergy. Combining traditional wet chemistry research with structure simulation studies will help in the epitopes' localization.

The droplet breakup model and characteristics of pH-shifted peanut protein isolate-high methoxyl pectin stabilised emulsions under ultrasound

The effect of pH on the occurrence states of peanut protein isolate (PPI) and high methoxyl pectin (HMP), and droplet breakup model of the emulsions under ultrasound were studied. Particle size distribution and scanning electron microscopy results showed that PPI-HMP existed a soluble complex at pH 5.0, had no interaction at pH 7.0, and was co-soluble at pH 9.0. Droplet breakup model results revealed that the characteristics of emulsion stabilised by PPI-HMP treated at pH 5.0 was different from that at pH 7.0 and 9.0. The average diameter of the droplet well satisfied the model. According to rheological properties, interface tension, and microstructure, the formation mechanism and characteristics of emulsion stabilised by PPI-HMP treated at pH 5.0 was different from that at pH 7.0 and pH 9.0. The research provided a reference for constructing emulsions using pH-shifted PPI-HMP under ultrasound.

Functional Proteins from Biovalorization of Peanut Meal: Advances in Process Technology and Applications

Environmental costs associated with meat production have necessitated researchers and food manufacturers to explore alternative sources of high-quality protein, especially from plant origin. Proteins from peanuts and peanut-by products are high-quality, matching industrial standards and nutritional requirements. This review contributes to recent developments in the production of proteins from peanut and peanut meal. Conventional processing techniques such as hot-pressing kernels, use of solvents in oil removal, and employing harsh acids and alkalis denature the protein and damage its functional properties, limiting its use in food formulations. Controlled hydrolysis (degree of hydrolysis between 1 and 10%) using neutral and alkaline proteases can extract proteins and improve peanut proteins' functional properties, including solubility, emulsification, and foaming activity. Peanut proteins can potentially be incorporated into meat analogues, bread, soups, confectionery, frozen desserts, and cakes. Recently, pretreatment techniques (microwave, ultrasound, high pressure, and atmospheric cold plasma) have been explored to enhance protein extraction and improve protein functionalities. However, most of the literature on physicochemical pretreatment techniques has been limited to the lab scale and has not been analysed at the pilot scale. Peanut-derived peptides also exhibit antioxidant, anti-hypertensive, and anti-thrombotic properties. There exists a potential to incorporate these peptides into high-fat foods to retard oxidation. These peptides can also be consumed as dietary supplements for regulating blood pressure. Further research is required to analyse the sensory attributes and shelf lives of these novel products. In addition, animal models or clinical trials need to be conducted to validate these results on a larger scale.

Total Utilization-Upcycling of Mushroom Protein By-Product: Characterization and Assessment as an Alternative Batter Ingredient for Fried Shrimp

Mushroom by-products are economical and eco-friendly raw materials with bioactive and functional characteristics that allow for potential uses as food ingredients. However, mushroom upcycling has yet to be fully exploited, despite the many opportunities that mushrooms may offer. The mushroom protein by-product (MPBP) resulting from mushroom protein production was characterized (chemical composition, physicochemical attributes, and functional properties) and incorporated into plant-based batter formulations to prepare four experimental groups with different ratios (w/w, %) of wheat flour (W) to MPBP (100 W, 75 W/25 MPBP, 25 W/75 MPBP, and 100 MPBP). Subsequently, the batter was used for frying batter-coated shrimp, which was evaluated for cooking loss, coating pick-up, oil absorption, and color parameters (L*, a*, and b*). MPBP showed high content of dietary fiber, mainly insoluble fiber (49%), and it is potentially suited for the formulation of high-fiber food products. The MPBP physicochemical attributes pH (11.69), water activity (0.34), L* (58.56), a* (5.61), b* (18.03), and particle size distribution (250-500 µm (22.12%), 125-250 µm (41.18%), 63-125 µm (37.53%), and < 63 µm (0.82%) were noted. Concerning the MPBP functional characteristics, solubility (12.7%), emulsifying activity index (7.6 m²/gr), emulsion stability index (52.4 min), water holding capacity (4.9%), and oil holding capacity (4.8%) were reported. Adding MPBP into batter formulations for batter-coated shrimp resulted in higher values of cooking loss, oil absorption, coating pick-up, and a* color, while lowering L* and b* values. The best experimental results were reported for group 75 W/25 MPBP, which indicates that MPBP can potentially be accepted as a novel batter ingredient for partial substitution of wheat flour.

Application of definitive screening design to optimization of the protein extraction and functional properties of proteins in Auricularia auricula

BACKGROUND

Auricularia auricula (A. auricula) is one of the most abundant sources of plant protein in edible fungi. Problems of low protein yield exist in traditional methods of protein extraction such as alkali extraction and ultrasonic-assisted alkali after pretreatment with enzymes. Thus, the protein extraction process was investigated and optimized using a definitive screening design from A. auricula to improve the protein yield under practical operating conditions of temperature, the concentration of NaCl, meal/water ratio, extraction time and pH.

RESULTS

The yield of protein isolates of the isoelectric-ammonium sulfate precipitation (9.34% w/w) was obtained almost three times and the protein content (55.23% w/w) was approximately 1.6 times that of the traditional extraction method of isoelectric precipitation. Next, the optimized method was successfully applied to the analysis of the functional properties of the protein. A. auricula protein isolate (AAPI) had better solubility, emulsification and foaming capacity than soy protein isolate (SPI) and pea protein isolate (PPI), and the oil holding capacity of AAPI exhibited extremely well, which was approximately five times that of SPI and six times that of PPI. The texture properties of AAPI gel were similar to those of PPI gels.

CONCLUSION

AAPI extracted by the optimized method had a satisfactory yield and had the potential to substitute plant-originated proteins in food processing. © 2022 Society of Chemical Industry.

Improving the Functional Performance of Date Seed Protein Concentrate by High-Intensity Ultrasonic Treatment

Date kernel is a plant-derived byproduct that has the potential to be converted into a high-value-added food ingredient, such as protein concentrate, in the food industry. Ultrasound, which is an alternative method for improving the functional properties of food proteins, is an effective physical treatment for modifying protein functionality. Solubility is the main criterion that primarily affects other functional properties of protein concentrates, such as emulsification, foaming, and water and oil binding. The aim of this study is to enhance the techno-functional performance of date seed protein concentrate (DSPC) by maximizing the solubility via a high-intensity ultrasound (HIUS) treatment at a fixed frequency of 20 kHz. The effect of ultrasonic homogenization under varying amplitudes and times (amplitude of 40, 60, and 80% for 5, 10, and 15 min, respectively) on the functional properties of the DSPC was investigated by using the response surface methodology (RSM). A face-centered central composite design (FC-CCD) revealed that the optimal process conditions of HIUS were at an amplitude of 80% for 15 min. The physicochemical and functional properties of the ultrasound-applied concentrate (DSPC-US) were determined under the optimum HIUS conditions, and then these properties of DSPC-US were compared to the native DSPC. The results showed that the solubility of all DSPC samples treated by HIUS was significantly (p < 0.05) higher than that of the native DSPC. In addition, emulsion activity/stability, foaming activity/stability, and oil-binding capacity increased after HIUS homogenization treatments, whereas the water-binding capacity decreased. These changes in the techno-functional properties of the DSPC-US were explained by the modification to the physicochemical structure of the DSPC (particle size, zeta potential, SDS-PAGE, SEM, FTIR, DSC, free SH content, surface hydrophobicity, and intrinsic emission). This work revealed that HIUS could be an effective treatment for enhancing the functional properties of date seed protein concentrate.

Ultrasound-Assisted Extraction of Protein from Pumpkin Seed Press Cake: Impact on Protein Yield and Techno-Functionality

Conventional solvent-based methods widely used for isolating plant proteins may deliver an unsatisfactory protein yield and/or result in protein degradation. The present study started with the optimization of pumpkin seed protein from press cake by alkaline extraction and subsequent isoelectric precipitation. Subsequently, extraction was supported by ultrasound under three conditions: ultrasonic treatment followed by alkaline extraction (US+AE), concomitant ultrasonic treatment and alkaline extraction (UAE), and alkaline extraction followed by ultrasonic treatment (AE+US). Compared to the control group, an increase in protein yield was achieved after ultrasonic treatment, while the highest protein yield was obtained with AE+US (57.8 ± 2.0%). Isolates with a protein content of 94.04 ± 0.77 g/100 g and a yield of 43.6 ± 0.97% were obtained under optimized conditions. Following ultrasonic treatment applied during extraction, solubility, foaming capacity, foam stability, and denaturation enthalpy of the isolated protein increased, and water binding capacity decreased as compared to non-sonicated samples. The d₉₀ particle size percentile of the extracted suspensions was 376.68 ± 38.32 µm for the control experiments, and particle size was significantly reduced in ultrasound-assisted treatments down to d₉₀ = 179.93 ± 13.24 µm for the AE+US treatment). Generally, ultrasonication resulted in a significant increase in protein yield and improved techno-functional properties of the isolates.

Comparison of soy protein isolate-(-)-epigallocatechin gallate complexes prepared by mixing, chemical polymerization, and ultrasound treatment

The effects of the preparation method (mixing, chemical polymerization, or ultrasound treatment) on the structure and functional properties of soy protein isolate-(-)-epigallocatechin-3-gallate (SPI-EGCG) complexes were examined. The mixing treated SPI-EGCG samples (M-SE) were non-covalently linked, while the chemical polymerization and ultrasound treated SPI-EGCG samples (C-SE and U-SE, respectively) were bound covalently. The covalent binding of EGCG with protein improved the molecular weight and changed the structures of the SPI by decreasing the α-helix content. Moreover, U-SE samples had the lowest particle size (188.70 ± 33.40 nm), the highest zeta potential (-27.82 ± 0.53 mV), and the highest polyphenol binding rate (59.84 ± 2.34 %) compared with mixing and chemical polymerization-treated samples. Furthermore, adding EGCG enhanced the antioxidant activity of SPI and U-SE revealed the highest DPPH (84.84 ± 1.34 %) and ABTS (88.89 ± 1.23 %) values. In conclusion, the SPI-EGCG complexes prepared by ultrasound formed a more stable composite system with stronger antioxidant capacity, indicating that ultrasound technology may have potential applications in the preparation of protein-polyphenol complexes.

Changes in Quality and Collagen Properties of Cattle Rumen Smooth Muscle Subjected to Repeated Freeze-Thaw Cycles

This study revealed changes in the quality, structural and functional collagen properties of cattle rumen smooth muscle (CSM) during F-T cycles. The results showed that thawing loss, pressing loss, β-galactosidase, β-glucuronidase activity, β-sheet content, emulsifying activity index (EAI), emulsion stability index (ESI), surface hydrophobicity, and turbidity of samples were significantly (p < 0.05) increased by 108.12%, 78.33%, 66.57%, 76.60%, 118.63%, 119.57%, 57.37%, 99.14%, and 82.35%, respectively, with increasing F-T cycles. Meanwhile, the shear force, pH, collagen content, α-helix content, thermal denaturation temperature (Tmax), and enthalpy value were significantly (p < 0.05) decreased by 30.88%, 3.19%, 33.23%, 35.92%, 10.34% and 46.51%, respectively. Scanning electron microscopy (SEM) and SDS-PAGE results indicated that F-T cycles induced an increase in disruption of CSM muscle microstructure and degradation of collagen. Thus, repeated F-T cycles promoted collagen degradation and structural disorder in CSM, while reducing the quality of CSM, but improving the functional collagen properties of CSM. These findings provide new data support for the development, processing, and quality control of CSM.

Heat treatment of quinoa (Chenopodium quinoa Willd.) albumin: Effect on structural, functional, and in vitro digestion properties

Quinoa seeds are rich in protein, polyphenols, phytosterols, and flavonoid substances, and excellent amino acid balance that has been revisited recently as a new food material showing potential applied in fitness and disease prevention. Heat treatment is one of the most effective strategies for improving the physiochemical characteristics of a protein. However, research examining the effects of temperature on quinoa albumin (QA) properties is limited. In this study, QA was subjected to thermal treatment (50, 60, 70, 80, 90, 100, and 121°C). SDS−PAGE revealed that QA is composed of several polypeptides in the 10−40 kDa range. Amino acid (AA) analysis showed that the branched-chain amino acids (BCAAs), negatively charged amino acid residues (NCAAs), and positively charged amino acids (PCAAs) contents of QA were more than double that of the FAO/WHO reference standard. Additionally, heating induced structural changes, including sulfhydryl-disulfide interchange and the exposure of hydrophobic groups. Scanning electron microscopy demonstrated that the albumin underwent denaturation, dissociation, and aggregation during heating. Moreover, moderate heat treatment (60, 70, and 80°C) remarkably improved the functional properties of QA, enhancing its solubility, water (oil) holding capacity, and emulsification and foaming characteristics. However, heating also reduced the in vitro digestibility of QA. Together, these results indicate that heat treatment can improve the structural and functional properties of QA. This information has important implications for optimizing quinoa protein production, and various products related to quinoa protein could be developed. which provides the gist of commercial applications of quinoa seeds for spreading out in the marketplace.

Phosphorylation of ovalbumin after pulsed electric fields pretreatment: Effects on conformation and immunoglobulin G/immunoglobulin E-binding ability

Ovalbumin (OVA) is one of major allergens of hen egg white with excellent nutritional and processing properties. Previous research exhibits that pulsed electric field (PEF) treatment could partially unfold OVA. This may contribute to the improvement of OVA phosphorylation. In this study, the effect of PEF pretreatment combined with phosphorylation on the structure and immunoglobulin (Ig) G/IgE-binding ability of OVA was investigated. The structural changes were measured by circular dichroism (CD), ultraviolet absorption, and fluorescence spectroscopy. The IgG- and IgE-binding abilities were determined by inhibition enzyme-linked immunosorbent assay (ELISA) using rabbit polyclonal antibodies and egg-allergy patients’ sera, respectively. The results showed that PEF pretreatment combined with phosphorylation markedly reduced the IgG- and IgE-binding abilities. It was attributed to the changes in secondary and tertiary structure, which was reflected in the increase of ultraviolet (UV) absorbance, α-helix content, and the increase the molecular weight. Moreover, it suggested PEF pretreatment improved the phosphorylation of OVA and enhanced the reduction of IgG/IgE-binding capacity of phosphorylated OVA. Therefore, PEF pretreatment combined with phosphorylation has the potential for developing a method for OVA desensitization.