Corn starch systems as carriers for yerba mate (Ilex paraguariensis) antioxidants

Porous corn starch granules as effective host matrices for encapsulation and sustained release of curcumin and resveratrol

Type 2 Diabetes Mellitus (T2DM) is a carbohydrate-rich diet-regulated ailment with carbohydrates digested and absorbed rapidly. Hence, modulating carbohydrate digestion is warranted; to this end, polyphenols from plant sources are handy. However, polyphenols' instability and low bioavailability limit their wholesome use, and thus, encapsulating them into an inexpensive and suitable wall material would be the best strategy. Herein, the potential of porous starch granules is demonstrated. Curcumin and resveratrol were chosen as the test polyphenols due to their proven health benefits, and porous corn starch granules were chosen as the wall material. Porous corn starch granules were prepared through enzymatic modification with 11, 22, and 33 units of amyloglucosidase at three reaction times of 2, 4, and 6 h. The polyphenols were loaded at 100, 200, and 500 mg concentrations in 1 g of starch for 21 days and were characterized through Scanning Electron Microscope (SEM) and Fourier Transform Infrared spectroscopy (FTIR) analyses. The encapsulation efficiency was determined, the rate of starch digestion was calculated through the Englyst test, and polyphenols' in vitro release behavior in gastric and intestinal fluids was measured. Results suggest that 33 enzyme units for a 2 h reaction time were optimal for forming spherical-oval pores on corn starch granules with the maximum encapsulation efficiency of 80.16 % and 88.33 % for curcumin and resveratrol, respectively. The FTIR results suggest the entrapment of polyphenols inside the starch matrix. The inclusion significantly reduced starch digestion and increased the percentage of resistant starch up to 41.11 % and 66.36 % with curcumin and resveratrol, respectively. The in vitro release behavior demonstrated good stability in the simulated gastric fluids and sustained release in simulated intestinal fluids. The encapsulated polyphenols showed a complex Fickian type of diffusion mechanism. Overall, the results suggest that porous corn starch granules could be a potential delivery system for curcumin and resveratrol and will aid in developing novel functional foods to address the T2DM concerns.

The art and science of porous starch: understanding the preparation method and structure-function relationship

Porous starch (PS), a modified form of starch with unique properties, is attracting substantial attention for its diverse advantages and applications. Its intricate porous structure, crystalline and amorphous characteristics, and hydrophilic-hydrophobic properties stem from pore formation via physical, chemical, enzymatic, and combined synergistic methods. Porous starch offers benefits like improved gelatinization temperature, water absorption, increased surface area, tunable crystallinity, and enhanced functional properties, making it appealing for diverse food industry applications. To optimize its properties, determining the parameters governing porous structure formation is crucial. Factors such as processing conditions, starch source, and modification methods substantially impact porosity and the overall characteristics of the material. Understanding and controlling these parameters allows customization for specific applications, from pharmaceutical drug delivery systems to enhancing texture and moisture retention in food products. To date, studies shedding light on how porosity formation can be fine-tuned for specific applications are fewer. This review critically assesses the existing reports on porous starch, focusing on how preparation methods affect porosity formation, thereby influencing the product's crystallinity/hydrophilic-hydrophobic nature and overall applicability.

Tunable interactions in starch-anthocyanin complexes switched by high hydrostatic pressure

Native starches usually have poor polyphenol-binding efficiency despite remarkable architectural structures. In this study, the interaction between cyandin-3-O-glucose (C3G) and three starches under high hydrostatic pressure was investigated. Pressure (200-550 MPa) was found to promote the binding rate of potato starch from 31.6% to 47.0% but reduced that of corn and pea starch to below 10% at 550 MPa. Microscopy results showed that pressurized corn and pea starch-C3G complexes partially or completely lost spatial structures, whereas potato starch-C3G complexes retained structural integrity. The former had decreased zeta potentials and increased particle sizes at 550 MPa, suggesting surface charges and specific surface area losses caused poor binding. Potato starch-C3G complexes, however, exhibited unchanged zeta potential and particle size but the strongest fluorescence at 200 MPa, indicating a positive binding shift from surface to interior. Overall, high hydrostatic pressure can regulate the interactions of native starches with anthocyanins via spatial structural changes.

Unravelling the anthocyanin-binding capacity of native starches from different botanical origins

In this study, the cyanidin-3-O-glucoside (C3G)-binding capacities of three native starches were investigated. While potato starch had the largest binding capacity of 0.34 mg/100 mg, corn and pea starch had binding capacities of 0.17 and 0.06 mg/100 mg. Confocal microscopy confirmed the binding results and revealed close associations between the surface properties and binding capacities. These findings were further substantiated with wettability and gelatinization results. The morphological observations showed that corn starch had advantageous particle sizes and more surface gullies, providing more opportunities to bind C3G. The zeta potential results, however, indicated that potato starch had the highest negative surface charges (-24 mV). These favorable electronic characteristics were believed to be responsible for the strongest electrostatic interactions. Hydrogen bonds, however, had a negligible effect on the formation of complexes. Overall, the negative surface charges and specific surface areas of the native starches were the most important factors determining C3G-binding capacities.

Antioxidant and Antidiabetic Properties of Phlorotannins from Ascophyllum nodosum Seaweed Extracts

Seaweeds have gained considerable attention in recent years due to their potential health benefits and high contents of bioactive compounds. This review focuses on the exploration of seaweed's health-promoting properties, with particular emphasis on phlorotannins, a class of bioactive compounds known for their antioxidant and antidiabetic properties. Various novel and ecofriendly extraction methods, including solid-liquid extraction, ultrasound-assisted extraction, and microwave-assisted extraction are examined for their effectiveness in isolating phlorotannins. The chemical structure and isolation of phlorotannins are discussed, along with methods for their characterization, such as spectrophotometry, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and chromatography. Special attention is given to the antioxidant activity of phlorotannins. The inhibitory capacities of polyphenols, specifically phlorotannins from Ascophyllum nodosum against digestive enzymes, such as α-amylase and α-glucosidase, are explored. The results suggest that polyphenols from Ascophyllum nodosum seaweed hold significant potential as enzyme inhibitors, although the inhibitory activity may vary depending on the extraction conditions and the specific enzyme involved. In conclusion, seaweed exhibits great potential as a functional food ingredient for promoting health and preventing chronic diseases. Overall, this review aims to condense a comprehensive collection of high-yield, low-cost, and ecofriendly extraction methods for obtaining phlorotannins with remarkable antioxidant and antidiabetic capacities.

Yerba mate: From waste to activated carbon for supercapacitors

Developing technological solutions that use yerba mate waste as precursors is key to reducing the environmental impact caused by the lack of treatment and its accumulation in landfills. Due to their physicochemical properties, these residues can be used to develop activated carbons. Activated carbon is a versatile material with a high surface area that can be used for energy storage. In this work, yerba mate residues were valued by producing chemically activated carbon to be used as electrode material in supercapacitors. Activated carbons were developed through chemical activation in two steps with KOH. Variables such as impregnation ratio and activation temperature are studied. The developed carbons were characterized by physicochemical and electrochemical techniques. They were found to have high surface areas, up to 1800 m² g^-1, with a hierarchical porous distribution. A maximum specific capacitance of 644 F g^-1 at 0.1 A g^-1, and power values of ca 32,000 W kg^-1, at 33 A g^-1 were found. All the synthesized carbons have excellent electrochemical properties and are suitable for use as active material in supercapacitors.

Starches in the encapsulation of plant active ingredients: state of the art and research trends

As a natural polymer, starches and their derivatives have received widespread attention in the cosmetic and pharmaceutical industries, particularly for their use as a coating material. In this sense, as an encapsulating agent, starches stand out, considering the number of compounds that they can trap. Additionally, they provide a nutritional contribution and may improve acceptance by patients. As such, this type of material may serve as an alternative to overcome gaps such as loss of activity of the active principles, low assimilation, or deterioration under environmental and physiological conditions. In this paper, we aim to present the state of the art and research trends on the use of starch as a wall material for the encapsulation of active principles of plant origin. It was found that the most-encapsulated active principles are essential oils and polyphenols; native or modified starches are typically used, either as the sole wall material or in combination with other polymers; and the most widely used methodology is spray drying. The reviewed studies indicate the potential of starches for their use in active ingredient encapsulation processes, improving their viability and expanding their range of applications in different industries, as well as showing a clearly increasing publication trend over the last 10 years.

Graphical abstract

Plasticized Mechanical Recycled PLA Films Reinforced with Microbial Cellulose Particles Obtained from Kombucha Fermented in Yerba Mate Waste

In this study, yerba mate waste (YMW) was used to produce a kombucha beverage, and the obtained microbial cellulose produced as a byproduct (KMW) was used to reinforce a mechanically recycled poly(lactic acid) (r-PLA) matrix. Microbial cellulosic particles were also produced in pristine yerba mate for comparison (KMN). To simulate the revalorization of the industrial PLA products rejected during the production line, PLA was subjected to three extrusion cycles, and the resultant pellets (r3-PLA) were then plasticized with 15 wt.% of acetyl tributyl citrate ester (ATBC) to obtain optically transparent and flexible films by the solvent casting method. The plasticized r3-PLA-ATBC matrix was then loaded with KMW and KMN in 1 and 3 wt.%. The use of plasticizer allowed a good dispersion of microbial cellulose particles into the r3-PLA matrix, allowing us to obtain flexible and transparent films which showed good structural and mechanical performance. Additionally, the obtained films showed antioxidant properties, as was proven by release analyses conducted in direct contact with a fatty food simulant. The results suggest the potential interest of these recycled and biobased materials, which are obtained from the revalorization of food waste, for their industrial application in food packaging and agricultural films.

Natural carriers: Recent advances in their use to improve the stability and bioaccessibility of food active compounds

In the last decades, the incorporation of bioactive compounds in food supplements aroused the attention of scientists. However, these ingredients often exhibit both low solubility and stability and their poor bioaccessibility within the gastrointestinal tract limits their effectiveness. To overcome these drawbacks, many carriers have been investigated for encapsulating nutraceuticals and enhancing their bioavailability. It is note that several different vegetable wall materials have been applied to build delivery systems. Considering their encapsulation mechanism, lipid and protein-based carriers display specific interaction patterns with bioactives, whereas polysaccharidic-based carriers can entrap them by creating porous highly stable networks. To maximize the encapsulation efficiency, mixed systems are very promising. Following the current goal of using natural and sustainable ingredients, only a limited number of studies about the isolation of new ingredients from agro-food waste are available. In this review, a comprehensive overview of the state of art in the development of innovative natural lipid-, protein- and polysaccharide-based plant carriers is presented, focusing on their application as food active compounds. Different aspects to be considered in the design of delivery systems are discussed, including the carrier structure and chemical features, the interaction between the encapsulating and the core material, and the parameters affecting bioactives entrapment.

Interactions between Ascophyllum nodosum Seaweeds Polyphenols and Native and Gelled Corn Starches

The effect of several blending procedures between Ascophyllum nodosum seaweed flour (AF) and corn starch (CS) on the interactions between polyphenols and starch was studied in this paper. These methods comprised the blending of AF with native starch (NT) with previously gelled starch gel (GL) and promoting the gelling of corn starch in the presence of AF (CGL). Different AF-CS (g/g) ratios (from 1:0.5 to 1:25) were studied. The liquid phase was chemically characterized by polyphenols (TPC) and carbohydrates content. The antioxidant activity of the liquid phase after achieving the solid-liquid equilibrium was determined by DPPH, ABTS, and FRAP methods. The solid phase was characterized by FT-IR and SEM techniques. The Halsey model successfully fitted the equilibrium TPC in liquid and polyphenols adsorbed/retained by the solid phase of tested systems. NT samples showed lower polyphenols sorption than gelled samples. The differences found between samples obtained with GL and CGL methods suggested different interactions between polyphenols and starch. Specifically, physisorption is predominant in the case of the GL method, and molecular trapping of polyphenols in the starch gel structure is relevant for the CGL method. Results allowed us to determine the enhancement of the retention of polyphenols to achieve starchy foods with high bioactivity.

Effect of flaxseed (Linum usitatissimum L.) flour and yerba mate (Ilex paraguariensis) extract on physicochemical and sensory properties of a gluten free corn-based snack

Flaxseed (Linum usitatissimum L.) and yerba mate (Ilex paraguariensis) are particularly interesting as functional ingredients due to their high content of essential omega 3-fatty acids and antioxidant properties, respectively. The objective of this work was to formulate a corn snack enriched with flaxseed flour and yerba mate extract and evaluate its physicochemical and sensory properties. Flaxseed flour, added at three levels 1, 3 and 5%, increased the water activity, moisture content and cohesiveness, and decreased the hardness and plastic deformation of the samples. The flour also changed the superficial colour and made the microstructure more compact. On the contrary, yerba mate extract (1 and 3%) decreased the water activity, moisture content and cohesiveness, counteracting the effect of flaxseed flour. Yerba mate increased the plastic deformation and the antioxidant activity of the snacks. The colour was not modified and the microstructure was more fragmented in the presence of yerba mate. Sensory evaluation suggested that flaxseed flour and yerba mate affected the flavour but did not modify the colour and crunchiness of the product.

Red araçá pulp microencapsulation by hydrolyzed pinhão starch, and tara and arabic gums

BACKGROUND

Red araçá is a Brazilian native species whose fruits are rich in phenolic acids, flavonoids, anthocyanins, and carotenoids. To preserve the properties of compounds during processing, red araçá pulp (RAP) was encapsulated by hydrolyzed pinhão starch (PS), tara gum (TG), and arabic gum (AG) in different blends in equal proportions, serving as a coating material.

RESULTS

Fresh RAP had a gallic acid equivalent of 3098 mg per 100 g of dry weight, 156.29 μg β-carotene per gram of dry weight, total anthocyanins of 18 mg per 100 g of dry weight and exhibited high antioxidant activity. The highest encapsulation efficiency achieved with the PS, TG, and AG blend was 80.4% for the total carotenoids, and that for the total anthocyanins was 76% with the TG and AG blend. Only one step of antioxidant activity degradation was identified, and the carrier system PSTG was efficient at maintaining the antioxidant activity, with half-life of 23.60-37.27 days.

CONCLUSION

The use of PS alone as a coating material or associated with TG and AG gums resulted in improved retention of bioactive compounds, these being an excellent alternative coating material since they improved the stability of the antioxidant activity of RAP. © 2020 Society of Chemical Industry.

Aerogels based on corn starch as carriers for pinhão coat extract (Araucaria angustifolia) rich in phenolic compounds for active packaging

The objective of this study was to produce renewable aerogels from native and anionic corn starches loaded with pinhão coat extract (PCE) with water absorbent capacity, antioxidant activity and controlled release of phenolic compounds in a hydrophilic food simulant media. Starch aerogels were produced with different concentrations of PCE, 5 and 10%, and evaluated for FT-IR spectra, relative crystallinity, thermal properties, water absorption capacity (WAC), density, antioxidant activity and in vitro release. Thermal stability of the compounds was improved by the incorporation of PCE. The aerogels presented high WAC of 541 to 731% and low-density values of 0.03 g.cm^-1. The highest inhibition of DPPH and ABTS radicals was presented to anionic starch aerogels with 10% PCE rendering 26% of inhibition of ABTS and 24% of DPPH. The maximum in vitro releases for native and anionic starch aerogels with 5% of PCE were 28.70 and 29.44%, respectively, and for aerogels with 10% of PCE they were 34.27 and 35.94%, respectively. The anionic starch aerogels had the highest amount of phenolic compounds released when compared to the native starch aerogels. The starch-based bioactive aerogels showed potential to be applied in food packaging as water absorbent and as a carrier of phenolic compounds.

Yerba Mate Extract in Microfibrillated Cellulose and Corn Starch Films as a Potential Wound Healing Bandage

Microfibrillated cellulose films have been gathering considerable attention due to their high mechanical properties and cheap cost. Additionally, it is possible to include compounds within the fibrillated structure in order to confer desirable properties. Ilex paraguariensis A. St.-Hil, yerba mate leaf extract has been reported to possess a high quantity of caffeoylquinic acids that may be beneficial for other applications instead of its conventional use as a hot beverage. Therefore, we investigate the effect of blending yerba mate extract during and after defibrillation of Eucalyptus sp. bleached kraft paper by ultrafine grinding. Blending the extract during defibrillation increased the mechanical and thermal properties, besides being able to use the whole extract. Afterwards, this material was also investigated with high content loadings of starch and glycerine. The results present that yerba mate extract increases film resistance, and the defibrillated cellulose is able to protect the bioactive compounds from the extract. Additionally, the films present antibacterial activity against two known pathogens S. aureus and E. coli, with high antioxidant activity and increased cell proliferation. This was attributed to the bioactive compounds that presented faster in vitro wound healing, suggesting that microfibrillated cellulose (MFC) films containing extract of yerba mate can be a potential alternative as wound healing bandages.

Effect of Iignocellulosic Nanoparticles Extracted from Yerba Mate (Ilex paraguariensis) on the Structural, Thermal, Optical and Barrier Properties of Mechanically Recycled Poly(lactic acid)

In this work, yerba mate nanoparticles (YMNs) were extracted from Ilex paraguairiencis yerba mate wastes and further used to improve the overall performance of mechanically recycled PLA (PLAR). Recycled PLA was obtained by melt reprocessing PLA subjected to an accelerated ageing process, which involved photochemical, thermal and hydrothermal ageing steps, as well as a final demanding washing step. YMNs (1 and 3 wt. %) were added to the PLAR during the melt reprocessing step and further processed into films. The main goal of the development of PLAR-YMNs bionanocomposites was to increase the barrier properties of recycled PLA, while showing good overall performance for food packaging applications. Thus, optical, structural, thermal, mechanical and barrier properties were evaluated. The incorporation of YMNs led to transparent greenish PLAR-based films with an effective blockage of harmful UV radiation. From the backbone FTIR stretching region (bands at 955 and 920 cm⁻¹), it seems that YMNs favor the formation of crystalline domains acting as nucleating agents for PLAR. The morphological investigations revealed the good dispersion of YMNs in PLAR when they are used in the lowest amount of 1 wt. %, leading to bionanocomposites with improved mechanical performance. Although the addition of high hydrophilic YMNs increased the water vapor transmission, the addition of 1 wt. % of YMNs enhanced the oxygen barrier performance of the produced bionanocomposite films. These results show that the synergistic revalorization of post-consumer PLA and nanoparticles obtained from agri-food waste is a potential way for the production of promising packaging materials that meet with the principles of the circular economy.

Modification methods toward the production of porous starch: a review

Starch is a complex carbohydrate formed by the repeating units of glucose structure connected by the alpha-glycosidic linkages. Starch is classified according to their derivatives such as cereals, legumes, tubers, palms, fruits, and stems. For decades, native starch has been widely utilized in various applications such as a thickener, stabilizer, binder, and coating agent. However, starches need to be modified to enhance their properties and to make them more functional in a wide range of applications. Porous starch is a modified starch product which has attracted interest of late. It consists of abundant pores that are distributed on the granule surface without compromising the integrity of its granular structure. Porous starch can be produced either by enzymatic, chemical, and physical methods or a combination thereof. The type of starch and selection of the modification method highly influence the formation of pore structure. By carefully choosing a suitable starch and modification method, the desired morphology of porous starch can be produced and applied accordingly for its intended application. Innovations and technologies related to starch modification methods have evolved over the years in terms of the structure, properties and modification effects of different starch varieties. Therefore, this article reviews recent modification methods in developing porous starch from various origins.

Influence of Starch Composition and Molecular Weight on Physicochemical Properties of Biodegradable Films

Thermoplastic starch (TPS) films are considered one of the most promising alternatives for replacing synthetic polymers in the packaging field due to the starch biodegradability, low cost, and abundant availability. However, starch granule composition, expressed in terms of amylose content and phosphate monoesters, and molecular weight of starch clearly affects some film properties. In this contribution, biodegradable TPS films made from potato, corn, wheat, and rice starch were prepared using the casting technique. The effect of the grain structure of each starch on microstructure, transparency, hydration properties, crystallinity, and mechanical properties of the films, was evaluated. Potato starch films were the most transparent and corn starch films the most opaque. All the films had homogeneous internal structures—highly amorphous and with no pores, both of which point to a good starch gelatinization process. The maximum tensile strength (4.48–8.14 MPa), elongation at break (35.41–100.34%), and Young’s modulus (116.42–294.98 MPa) of the TPS films were clearly influenced by the amylose content, molecular weight, and crystallinity of the film. In this respect, wheat and corn starch films, are the most resistant and least stretchable, while rice starch films are the most extensible but least resistant. These findings show that all the studied starches can be considered suitable for manufacturing resistant and flexible films with similar properties to those of synthetic low-density polyethylene (LDPE), by a simple and environmentally-friendly process.

Gastrointestinal interactions, absorption, splanchnic metabolism and pharmacokinetics of orally ingested phenolic compounds

The positive health effects of phenolic compounds (PCs) have been extensively reported in the literature. An understanding of their bioaccessibility and bioavailability is essential for the elucidation of their health benefits. Before reaching circulation and exerting bioactions in target tissues, numerous interactions take place before and during digestion with either the plant or host's macromolecules that directly impact the organism and modulate their own bioaccessibility and bioavailability. The present work is focused on the gastrointestinal (GI) interactions that are relevant to the absorption and metabolism of PCs and how these interactions impact their pharmacokinetic profiles. Non-digestible cell wall components (fiber) interact intimately with PCs and delay their absorption in the small intestine, instead carrying them to the large intestine. PCs not bound to fiber interact with digestible nutrients in the bolus where they interfere with the digestion and absorption of proteins, carbohydrates, lipids, cholesterol, bile salts and micronutrients through the inhibition of digestive enzymes and enterocyte transporters and the disruption of micelle formation. PCs internalized by enterocytes may reach circulation (through transcellular or paracellular transport), be effluxed back into the lumen (P-glycoprotein, P-gp) or be metabolized by phase I and phase II enzymes. Some PCs can inhibit P-gp or phase I/II enzymes, which can potentially lead to drug-nutrient interactions. The absorption and pharmacokinetic parameters are modified by all of the interactions within the digestive tract and by the presence of other PCs. Undesirable interactions have promoted the development of nanotechnological approaches to promote the bioaccessibility, bioavailability, and bioefficacy of PCs.

Encapsulation, protection, and delivery of bioactive proteins and peptides using nanoparticle and microparticle systems: A review

There are many examples of bioactive proteins and peptides that would benefit from oral delivery through functional foods, supplements, or medical foods, including hormones, enzymes, antimicrobials, vaccines, and ACE inhibitors. However, many of these bioactive proteins are highly susceptible to denaturation, aggregation or hydrolysis within commercial products or inside the human gastrointestinal tract (GIT). Moreover, many bioactive proteins have poor absorption characteristics within the GIT. Colloidal systems, which contain nanoparticles or microparticles, can be designed to encapsulate, retain, protect, and deliver bioactive proteins. For instance, a bioactive protein may have to remain encapsulated and stable during storage and passage through the mouth and stomach, but then be released within the small intestine where it can be absorbed. This article reviews the application of food-grade colloidal systems for oral delivery of bioactive proteins, including microemulsions, emulsions, nanoemulsions, solid lipid nanoparticles, multiple emulsions, liposomes, and microgels. It also provides a critical assessment of the characteristics of colloidal particles that impact the effectiveness of protein delivery systems, such as particle composition, size, permeability, interfacial properties, and stability. This information should be useful for the rational design of medical foods, functional foods, and supplements for effective oral delivery of bioactive proteins.

Preparation and structural characterization of corn starch-aroma compound inclusion complexes

BACKGROUND

Six corn starch inclusion complexes were synthesized using small nonpolar or weak polar aroma compounds (heptanolide, carvone and menthone) and small polar aroma compounds (linalool, heptanol and menthol). The objectives of this study were to (a) investigate the ability of corn starch to form inclusion complexes with these aroma compounds and (b) characterize the structure of the corn starch inclusion complexes.

RESULTS

The resulting inclusion ratios were 75.6, 36.9, 43.8, 91.9, 67.2 and 54.7% for heptanolide, carvone, menthone, linalool, heptanol and menthol respectively. The inclusion complexes had laminated structures with a certain amount of holes or blocky constructions. Compared with gelatinized corn starch, the transition temperatures, peak temperatures and enthalpies of the inclusion complexes were significantly different. The major peak of CO at 1771 cm^-1 and significant peak shifts revealed the formation of inclusion complexes. X-ray diffractometry (XRD) analyses revealed that the crystallinity of corn starch-polar aroma compound inclusion complexes increased. Based on cross-polarization magic angle spinning ¹³ C nuclear magnetic resonance (CP-MAS ¹³ C NMR) results, novel peaks and chemical shifts were attributed to the presence of small aroma compounds, thereby confirming the formation of corn starch inclusion complexes.

CONCLUSION

Small nonpolar and polar aroma compounds can be complexed to corn starch. © 2016 Society of Chemical Industry.

Microspheres as carriers for lipase inhibitory substances to reduce dietary triglyceride absorption in mice

The present study intends to use microspheres as a delivery system of chlorogenic acid (CGA) to investigate the influences of CGA microspheres on dietary fat absorption and fecal triglyceride excretion in a mice model. Microspheres have an average particle size of about 53.3 μm. Results indicated that the microspheres were capable of gradually releasing the preloaded CGA into the surrounding medium. Their bioadhesive property might help prolong the gastrointestinal transit time in mice, and render a better mixing and contact between CGA and triglyceride. Consumption of CGA microspheres resulted in a significantly higher level of fecal triglyceride (119-144%) as compared with the corresponding control groups. A microsphere would be a desirable vehicle for CGA to improve its efficacy along the intestine.