Effect of sonication on colour, ascorbic acid and yeast inactivation in tomato juice

Evaluation of carrageenans extracted by an eco-friendly technology as source for gelled matrices with potential food application

Red macroalgae are considered an immense source of hydrocolloids (agar and carrageenan) that are gaining momentum in the food industry as an alternative to animal-based ones, like gelatin. This work evaluates carrageenans extracted from four different red macroalgae (Chondrus crispus, Mastocarpus stellatus, Sarcopeltis skottsbergii and Gigartina pistillata) by an eco-friendly process (hydrothermal extraction), for their possible employment as food additives considering purity requirements stated by the European Regulation. In general, carrageenans presented a suitable composition, although some sample presented lower sulfate content than 15 % and higher As content than 3 mg/kg, being only carrageenans from Chondrus crispus and Sarcopeltis skottsbergii appropriate for gelled matrices formulation. Different concentrations of hydrocolloids (1-5 %) and salts (0.1-1 M NaCl, CaCl2 and KCl) were evaluated to reach a desired consistency. Rheological behavior of said gels revealed a gel-like behavior, with G' > G" and practically frequency independency of the parameters. Overall, gels formulated with KCl achieved higher G' with maximum values of 100-1000 Pa, whereas the commercial gelled dessert (used as control) only achieved values of around 10 Pa. After 3 months of cold storage, all gels exhibited a strengthening of the gelled matrix, without water syneresis. The colorimetric parameters were also evaluated, showing higher inclination for red and yellow tones with modest lightness values (around 60 %). In this work, hydrothermally extracted carrageenans from Chondrus crispus and Sarcopeltis skottsbergii were assessed, laying the groundwork for further studies in this area.

Innovative Pathogen Reduction in Exported Sea Bass Through Atmospheric Cold Plasma Technology

The safety of sea bass is critical for the global food trade. This study evaluated the effectiveness of atmospheric cold plasma in reducing food safety risks posed by Salmonella Enteritidis and Listeria monocytogenes, which can contaminate sea bass post harvest. Cold plasma was applied to inoculated sea bass for 2 to 18 min, achieving a maximum reduction of 1.43 log CFU/g for S. Enteritidis and 0.80 log CFU/g for L. monocytogenes at 18 min. Longer treatments resulted in greater reductions; however, odor and taste quality declined to a below average quality in samples treated for 12 min or longer. Plasma treatment did not significantly alter the color, texture, or water activity (aw) of the fish. Higher levels of thiobarbituric acid reactive substances (TBARSs) were observed with increased exposure times. Cold plasma was also tested in vitro on S. Enteritidis and L. monocytogenes on agar surfaces. A 4 min treatment eliminated the initial loads of S. Enteritidis (2.71 log CFU) and L. monocytogenes (2.98 log CFU). The findings highlight the potential of cold plasma in enhancing the safety of naturally contaminated fish. Cold plasma represents a promising technology for improving food safety in the global fish trade and continues to be a significant area of research in food science.

Fortification of Orange and Apple Juices with Ferulic Acid: Implications for Food Safety and Quality

In recent years, the awareness of healthier lifestyles among consumers has driven to an increased interest in more natural, nutritious, and low-processed foods. Ferulic acid, one of the most abundant phenolic acids in plants, has demonstrated a wide spectrum of antimicrobial activities and a range of biomedical effects, including antioxidant, antiallergic, hepatoprotective, anticarcinogenic, anti-inflammatory, and antithrombotic, among others. The objective of this work was to study the antilisterial effect of ferulic acid (FA, 1500 mg/L) on fresh, ready-to-eat orange (FOJ) and apple (FAJ) juices and evaluate its effect on product quality. The results showed that FA reduced the Listeria monocytogenes population after 9 days of storage at 4 °C, but no effect on the indigenous microbiota was observed. The titratable acidity and color significantly changed. The antioxidant capacity and total phenolic content significantly increased with the addition of FA, being at least two times greater in fortified juices. FAJ and FOJ containing FA were scored lower (6.8 and 5.7 on a 9-point hedonic scale, respectively) than their respective controls. Overall, our results demonstrated that FA treatment could be a useful strategy to maintain the safety of fresh apple and orange juices and increase the antioxidant activity and phenolic content. The potential industrial applications and health benefits of the fortification of fruit juices with FA should be further explored.

Marine macroalgae in rabbit feed - Effects on meat quality

The addition of macroalgae to livestock diets has demonstrated to enhance the quality of meat by improving the muscle stability, antioxidant capacity and fatty acid profile. However, information regarding rabbit meat is scarce. This study evaluated the effect of adding 1.025% of different macroalgae, dehydrated and as extracts (Saccharina latissima, Himanthalia elongata and Ulva spp.) to the diet of growing rabbits. Dietary supplementation with the Ulva spp. extract increased the fat content (0.96% vs 0.33% in control group) and the proportion of monounsaturated fatty acids (by 22%; P ≤ 0.022), but did not affect the moisture, protein or ash contents or the physicochemical properties of the rabbit longissiumus lumborum muscle. The antioxidant status of the meat was adequate and was not affected by the dietary supplements. The sensorial properties of the meat were also not affected, and dietary supplementation with both S. latissima and H. elongata actually enhanced the flavour and juiciness of the meat (P ≤ 0.01). Altogether, the study findings indicate that the addition of these sustainable ingredients to rabbit feed did not negatively affect meat quality, and some of them may potentially improve specific characteristics, which could make this meat more attractive to consumers.

A preliminary study on the use of phycocyanin as a natural blue color source in toffee-type soft candy: Effect of storage temperature and pigment concentration

In this study, phycocyanin obtained from Spirulina platensis extract was used at various concentrations as a natural blue color source in toffee-type soft candy, and the effect of various storage temperatures (4, 20, and 40°C) on the color stability was investigated. In addition, main quality parameters, such as water activity, texture, and sensory analysis, were determined in the samples stored for 3 months at 20°C, and thus the effect of phycocyanin addition on the product appeal was studied. According to the results, the addition of phycocyanin powder did not significantly affect water activity (p > .05). As expected, L*, a*, and b* values of the samples changed with the phycocyanin, and the ΔE values of the samples stored at 4, 20, and 40°C varied between 0.14-0.44, 0.84-2.76, and 2.63-7.90, respectively, during the entire storage period. The texture analysis outputs revealed that the use of phycocyanin did not cause any change in the textural properties of the samples (p > .05). Considering the sensory analysis, all studied concentrations scored high in terms of color liking, and the use of phycocyanin in toffee-type soft candy production resulted in a remarkable consumer appeal. Hence, the outcomes of this study show that if temperature control is performed in the production, the organoleptic properties of toffee-type candy products can be enhanced using phycocyanin and can meet consumer requests and demands.

Radio frequency-only thermal processing of skimmed milk powder: Case study on the influence of RF heating profile on quality and Salmonella Typhimurium inactivation

Radio frequency (RF) is a dielectric heating technology that allows rapid and volumetric heating of milk powder, outperforming the heating uniformity of conventional powder heating methods. Typically, RF milk powder processing consists of a fast RF heating phase, followed by an oven heating phase in temperatures around 90 °C. This methodology can result in milk powder quality deterioration due to non-uniform temperature distributions and local overheating. Radio frequency-only processes with a more gradual heating rate are alternative solutions to minimise the impact on milk powder quality. This study investigated the effect of the heating rate on the microbial inactivation of Salmonella Typhimurium inoculated in skimmed milk powder, as well as the effect of each process on two quality characteristics, colour and solubility. Overall, a slower heating profile resulted in sufficient inactivation rates of Salmonella in skimmed milk powder, while still providing a high-quality end product. A 4-log reduction was achieved by treating the skimmed milk powder up to 95 °C using a slower, longer heating rate. No statistically significant changes were observed in the solubility of skimmed milk powder and only the harshest treatment to 95 °C led to a slight increase in the yellowness of the skimmed milk powder colour.

Effect of Physical Separation with Ultrasound Application on Brewers' Spent Grain to Obtain Powders for Potential Application in Foodstuffs

Brewers' spent grain (BSG) is the primary by-product of beer production, and its potential use in food products is largely dependent on its processing, given its moisture content of up to 80%. This study aimed to evaluate the effects of physical separation with ultrasound application on the color, total phenolic content (TPC), antioxidant activity, proximate composition, total dietary fibers, and particle size distribution of BSG powders. Wet BSG (W) was subjected to two processes: one without ultrasound (A) and one with ultrasound (B). Both processes included pressing, convective air-drying, sieving, fraction separation (A1 and B1 as coarse with particles ≥ 2.36 mm; A2 and B2 as fine with particles < 2.36 mm), and milling. The total color difference compared to W increased through both processes, ranging from 1.1 (B1 vs. A1) to 5.7 (B1 vs. A2). There was no significant difference in TPC, but process B powders, particularly B2, showed lower antioxidant activity against ABTS•+, likely due to the release of antioxidant compounds into the liquid fraction during pressing after ultrasound treatment. Nonetheless, process B powders exhibited a higher content of soluble dietary fibers. In conclusion, ultrasound application shows potential for further extraction of soluble fibers. However, process A might be more practical for industrial and craft brewers. Further studies on the use of the resulting BSG powders as food ingredients are recommended.

Room temperature storage of myrtle (Eugenia gracillima Kiaersk.) tropical juice: Effects of physical and chemical preservation methods

Tropical fruit juices produced from native fruits have been widely marketed by small agribusinesses in the Brazilian semiarid region, necessitating a deeper understanding of the impact of preservation methods on quality parameters. This study aimed to prepare myrtle (Eugenia gracillima Kiaersk.) tropical juice and investigate the effects of physical preservation (90 °C for 60 s) and chemical preservation (potassium sorbate and sodium benzoate) methods. Tropical juice formulations were evaluated after preparation and every 15 days during 60 days of storage in high-density polyethylene bottles at room temperature (25 ± 2 °C). Microbiological parameters, optical microscopy, physicochemical and bioactive parameters, antioxidant capacity, and color parameters were determined. Heat-treated tropical juice showed low counts of all microbiological parameters, but optical microscopy revealed the presence of filamentous fungi after 60 days of storage. Combined use of potassium sorbate and sodium benzoate effectively prevented the development of total yeasts and molds up to 28 days of storage. Bioactive compounds in myrtle pulp contribute to storage stability, mainly total phenolics, estimated at 855.86 mg gallic acid equivalents 100 g-1. The results suggest that it is possible to harness the economic and agroindustrial potential of E. gracillima Kiaersk. fruits for the production of tropical juices, but it is recommended that other technologies be explored, such as aseptic processing or the combined use of physical and chemical methods.

Effect of Chickpea (Cicer arietinum L.) Flour Incorporation on Quality, Antioxidant Properties, and Bioactive Compounds of Shortbread Cookies

High nutritional value and antioxidant properties make chickpea flour a valuable substitute for wheat flour, although its texture-forming abilities are different. The aim of this study was to investigate the possibility of increasing the content of bioactive compounds and antioxidant properties of shortbread cookies by simple partial or complete replacement of wheat flour with chickpea flour without considerable changes in texture, color, sensory properties, or acceptability. Shortbread cookies were made from wheat flour (0% of chickpea flour), wheat flour and chickpea flour (replacement of 25%, 50%, and 75%), and chickpea flour (100%). Generally, the increase in chickpea flour share resulted in an increase in protein, fat, and ash content, as well as antioxidant properties. Polyphenol content, flavonoid content, and antioxidant activities increased three- to sixfold in shortbread cookies containing chickpea flour in comparison to wheat cookies. The level of proteins increased about 50% and the antioxidant properties were three to six times higher than in wheat cookies. Cookies containing up to 75% chickpea flour were assessed as very good or good quality, while only cookies without wheat flour were assessed as sufficient quality. It could be concluded that part of the wheat flour content in shortbread cookies can be replaced by chickpea flour. Application of a 25% proportion of chickpea flour increases physicochemical properties without changes in sensory properties. Sensory quality was up to 75% lower, but antioxidant properties were increased. However, complete replacement of wheat flour in shortbread cookies without changing the recipe resulted in a product of slightly lower sensory quality.

Reduction in the antigenicity of beta-lactoglobulin in whole milk powder via supercritical CO2 treatment

Cow milk allergy is a common phenomenon experienced in early childhood (<5 yr of age) with an average occurrence rate of roughly 2.5%. The most prevalent allergen in cow milk is believed to be β-LG. The objective of this study was to evaluate the use of hydrophobic supercritical CO2 (ScCO2) to modify the chemical structure β-LG, thus impairing its recognition by antibodies. Whole milk powder (WMP) was selected because of its closest compositional resemblance to bovine fluid milk and its applications in reconstitution and in the beverage (infant, toddler, and adult), confectionary, bakery, and meat industries. For this study, WMP was treated with food-grade CO2 at temperatures of 50, 63, and 75°C under operating pressures of 100, 150, 200, 250, and 300 bar. Proteins in WMP were examined using SDS-PAGE, western blot, and ELISA. Orbitrap Fusion liquid chromatography-tandem MS (LC-MS/MS) and periodic staining was performed to confirm post-translational modifications in β-LG. Functional properties of WMP before and after treatment were assessed by its solubility index, oil holding capacity, emulsion capacity and stability, zeta potential, particle size, and color analysis. SDS-PAGE of treated samples yielded fuzzy bands (variable mobility of molecules due to different molecular weights results in ill-defined bands) indicative of an increase in molecular weight, presumably due to chemical change in the protein, and demonstrated a maximum of 71.13 ± 0.29% decrease in the band intensity of β-LG under treatment conditions of 75°C/300 bar for 30 min. These changes were small with samples treated with heat only. Lighter, diffused bands were observed using western blot analysis. The ELISA tests proved that ScCO2 treatment specifically and significantly affected the antigenicity of β-LG with a reduction of 42.9 ± 2.83% and 54.75 ± 2.43% at 63°C/200 bar and 75°C/300 bar, respectively. Orbitrap fusion detected the presence of fatty acids and sugar moieties bound to β-LG and the latter was confirmed by periodic staining. Functional properties of ScCO2-treated milk powder yielded a decrease in solubility index and an increase in emulsion capacity of WMP was observed under ScCO2 treatment at 75°C/300 bar, with small and insignificant changes at other treatments producing a decrease in antigenicity. Color changes were small for most samples, except at 63°C/200 bar, where a significant increase in yellowness was observed. Zeta potential and particle size measurements indicated that most changes were temperature driven. This study demonstrates 2 approaches to mitigate β-LG antigenicity via fatty acid binding and lactosylation using hydrophobic ScCO2.

Increasing the efficiency of cumin essential oil extraction using cold plasma pretreatments

BACKGROUND

Cumin (Cuminum cyminum L.) is one of the most important medicinal plants, and its essential oil (EO) varies between 2.5% to 5% depending on differences in climate. The extraction method plays a significant role in the market price of EOs. In this study, the effect of atmospheric cold plasma (ACP) pretreatments (using air and argon (Ar) gases) for different times on the EO yield and on the quality, color, surface morphology, and wettability of cumin seeds were studied.

RESULTS

The scanning electron microscope analysis results revealed that the formation of fissures and cracks caused by ACP pretreatments was directly related to increasing the efficiency of EO extraction. Comparing the two gas treatments, the highest total color changes ΔE were related to the Ar and the lowest to the air treatment, and the highest amount of browning index was related to the Ar ACP pretreatment. In general, the ACP pretreatments improved the extraction efficiency compared with the control, so that the highest increase was observed in the Ar ACP pretreatment at the rate of 44%. Ar ACP pretreatments were observed to have a higher extraction efficiency than air ACP did. In the Ar ACP-treated samples, cumin aldehyde, as the most important component of EO, was increased compared with the control (47.9-56.4%).

CONCLUSION

The data obtained in this study showed that ACP pretreatment of cumin seeds could increase EO extraction efficacy. Thus, ACP could be a promising technique to enhance the cumin seed EO extraction. © 2024 Society of Chemical Industry.

Optimization of thermosonication conditions for critical quality parameters of watermelon juice using response surface methodology

Topical consumer interest in natural, healthier, safer and nutritional juice, has inspired the search for innovative technologies that can minimize product degradation. In this regard, thermosonication has been proposed as a potential processing technology that can preserve and produce "fresh" products. Watermelon (Citrullus lanatus) juice is a nutrient-rich fruit juice that is desired by consumers due to its appealing color, pleasant odor, sweet taste and low-calorie content. This fruit juice is, however, highly perishable and prone to microorganisms, because of its neutral pH value and high amount of water activity. In addition, it is thermo-sensitive and therefore degrades quickly under thermal processing. This study aimed to identify the optimal thermosonication processing conditions for retaining the critical quality parameters (lycopene, β-carotene, ascorbic acid and total polyphenolic content) of watermelon juice. Response surface methodology, employing a central composite design, was used to determine the effects of temperature (18-52 °C), processing time (2-13 min) and amplitude level (24-73 μm) at a constant frequency of 25 kHz. The highest quality parameters were obtained at 25 °C, 2 min, and 24 µm at a constant frequency of 25 kHz, which resulted in lycopene of 8.10 mg/100 g, β-carotene of 0.19 mg/100 g, ascorbic acid of 3.11 mg/100 g and total polyphenolic content of 23.96 mg/GAE/g with a desirability of 0.81. The proposed model was adequate (p < 0.0001), with a satisfactory determination coefficient (R2) of less than 0.8 for all phytochemicals. Thermosonicated watermelon juice samples showed minimal changes in their phytochemical properties, when compared to fresh juices; the lycopene content showed a significant increase after thermosonication, and a significant retention of β-carotene, ascorbic acid and total polyphenolic acid was observed. According to the findings, thermosonication could be a viable method for preserving watermelon juice, with minimal quality loss and improved functional attributes.

Exploiting the Potential of Powdered Blends of Recovered Sunflower Seed Cake Phenolics and Whey-Development of Sustainable Food Additives

The management of side streams from the food industry, especially oil and dairy by-products, has become an important issue linked to the European Commission's recommendations for a circular economy. This study aimed to obtain sustainable food additives in the form of soluble-type powders composed of whey and recovered phenolics originating from sunflower seed cake. In order to valorise these di-blend products, the powders were characterised in terms of their physical, chemical, and sensory attributes. Based on the study findings, the addition of sunflower seed cake washouts (SSCWs) to whey (Wh) decreased the dry matter in the feed that affected the viscosity and drying yield. The addition of SSCWs did not have a significant effect on the physical properties of powders, except for colour. By-product management proposed in the study resulted in the production of nutritious and ready-to-use products in powder form with improved functional properties in terms of phenolic compounds and antioxidant capacity. The powders were sensorially appealing with a tangy sourness entwined with a delicate interplay of sweet and salty flavours, which can be easily incorporated into different types of foodstuffs.

Enrichment of a fruit-based smoothie beverage with omega-3 fatty acids from microencapsulated chia seed oil

BACKGROUND

Omega-3 fatty acids are known for their various health benefits. Chia is the richest vegetable source of omega-3 fatty acids. However, its oil is highly susceptible to oxidative deterioration and should be protected for incorporation into food matrices. This work aimed to study the incorporation of different chia oil microcapsules in a powdered beverage, analyzing the effect on the physicochemical characteristics and stability during storage.

RESULTS

Different types of microcapsules were obtained: monolayer microcapsules using sodium caseinate and lactose as wall material, and multilayer microcapsules produced through electrostatic deposition using lecithins, chitosan, and chia mucilage as the first, second, and third layers, respectively. The results demonstrated an efficient enrichment of smoothies, with omega-3 fatty acid values ranging from 24.09% to 42.73%, while the original food matrix powder lacked this component. These powder beverages exhibited low moisture content (≤ 2.91%) and low water activity (≤ 0.39). The aerated, packed density and compressibility assays indicated that adding microcapsules made the powders less dense and compressible. The color of the original powdered beverage was not modified. The dispersibility reflected an acceptable instantaneity, reaching the maximum obscuration after 30 s of stirring. The solubility of all the enriched products was higher than 70%, whereas the pH was ~6.8. The contact angle between the powder and liquid indicated an excellent ability to be reconstituted in water. The analysis of the glass transition temperature showed that the storage temperature (25 °C) was adequate. The peroxide value of all the products was low throughout the storage (≤ 1.63 meq peroxide kg-1 of oil at 90 days at 25 ± 2 °C), thus maintaining the quality of the microencapsulated chia oil.

CONCLUSIONS

The results suggest that incorporating the monolayer and multilayer chia oil microcapsules that were studied could be a viable strategy for enriching smoothies with the omega-3 fatty acids present in chia seed oil. © 2023 Society of Chemical Industry.

Characterization of Polylactic Acid Biocomposites Filled with Native Starch Granules from Dioscorea remotiflora Tubers

Biocomposites were fabricated utilizing polylactic acid (PLA) combined with native starch sourced from mountain's yam (Dioscorea remotiflora Knuth), an underexplored tuber variety. Different starch compositions (7.5, 15.0, 22.5, and 30.0 wt.%) were blended with PLA in a batch mixer at 160 °C to produce PLA/starch biocomposites. The biocomposites were characterized by analyzing their morphology, particle size distribution, thermal, X-ray diffraction (XDR), mechanical, and dynamic mechanical (DMA) properties, water absorption behavior, and color. The results showed that the amylose content of Dioscorea remotiflora starch was 48.43 ± 1.4%, which corresponds to a high-amylose starch (>30% of amylose). Particle size analysis showed large z-average particle diameters (Dz0) of the starch granules (30.59 ± 3.44 μm). Scanning electron microscopy (SEM) images showed oval-shaped granules evenly distributed throughout the structure of the biocomposite, without observable agglomeration or damage to its structure. XDR and DMA analyses revealed an increase in the crystallinity of the biocomposites as the proportion of the starch increased. The tensile modulus (E) underwent a reduction, whereas the flexural modulus (Eflex) increased with the amount of starch incorporated. The biocomposites with the highest Eflex were those with a starch content of 22.5 wt.%, which increased by 8.7% compared to the neat PLA. The water absorption of the biocomposites demonstrated a higher uptake capacity as the starch content increased. The rate of water absorption in the biocomposites followed the principles of Fick's Law. The novelty of this work lies in its offering an alternative for the use of high-amylose mountain's yam starch to produce low-cost bioplastics for different applications.

Enhancing Raw Bovine Milk Quality using Ultraviolet-C (UV-C) Irradiation: A Microbial and Lipid Peroxidation Study

This study investigated the efficacy of ultraviolet-C (UV-C) irradiation in enhancing the quality of raw bovine milk by targeting microbial populations and lipid peroxidation, both of which are key factors in milk spoilage. We categorized the raw milk samples into three groups based on initial bacterial load: low (<3 Log 10 CFU/mL), medium (3-4 Log 10 CFU/mL), and high (>4 Log 10 CFU/mL). Using a 144 W thin-film UV-C reactor, we treated the milk with a flow rate of 3 L/min. We measured the bacterial count including standard plate count, coliform count, coagulase-negative staphylococci count, and lactic acid bacteria count and lipid peroxidation (via thiobarbituric acid reactive substances assay) pre- and post-treatment. Our results show that UV-C treatment significantly reduced bacterial counts, with the most notable reductions observed in high and medium initial load samples (>4 and 3-4 Log 10 CFU/mL, respectively). The treatment was particularly effective against coliforms, showing higher reduction efficiency compared to coagulase-negative staphylococci and lactic acid bacteria. Notably, lipid peroxidation in UV-C treated milk was significantly lower than in pasteurized or untreated milk, even after 72 hours. These findings demonstrate the potential of UV-C irradiation as a pre-treatment method for raw milk, offering substantial reduction in microbial content and prevention of lipid peroxidation, thereby enhancing milk quality.

Effect of Germination on the Physicochemical Properties, Functional Groups, Content of Bioactive Compounds, and Antioxidant Capacity of Different Varieties of Quinoa (Chenopodium quinoa Willd.) Grown in the High Andean Zone of Peru

Germination is an effective strategy to improve the nutritional and functional quality of Andean grains such as quinoa (Chenopodium quinoa Willd.); it helps reduce anti-nutritional components and enhance the digestibility and sensory aspects of the germinated. This work aimed to evaluate the effect of germination (0, 24, 48, and 72 h) on the physicochemical properties, content of bioactive compounds, and antioxidant capacity of three varieties of quinoa: white, red, and black high Andean from Peru. Color, nutritional composition, mineral content, phenolic compounds, flavonoids, and antioxidant activity were analyzed. Additionally, infrared spectra were obtained to elucidate structural changes during germination. The results showed color variations and significant increases (p < 0.05) in proteins, fiber, minerals, phenolic compounds, flavonoids, and antioxidant capacity after 72 h of germination, attributed to the activation of enzymatic pathways. In contrast, the infrared spectra showed a decrease in the intensity of functional groups -CH-, -CH2-, C-OH, -OH, and C-N. Correlation analysis showed that flavonoids mainly contributed to antioxidant activity (r = 0.612). Germination represents a promising alternative to develop functional ingredients from germinated quinoa flour with improved nutritional and functional attributes.

Comparison of the Antioxidant and Sensorial Properties of Kvass Produced from Mountain Rye Bread with the Addition of Selected Plant Raw Materials

Consumers' growing awareness of healthy nutrition results in an increase in demand for the production of beverages with health-promoting properties. An example of such a product is kvass produced in the fermentation process. This research aimed to determine the impact of plant additives on the antioxidant and sensorial properties of kvass made from bread based on mountain rye flour. The bread extract was fermented at different temperatures (28 and 34 °C). Additives of 3, 5, and 10% were used in the tests, which included black chokeberry juice and infusion, sea buckthorn fruit juice and infusion, and peppermint leaf infusion. A higher fermentation temperature in the production process resulted in an improvement in the organoleptic and antioxidant properties of the tested kvasses. The highest antioxidant activity was demonstrated by kvass with the addition of 10% black chokeberry juice (0.734 µmol Trolox g-1 (ABTS), 4.90 µmol of Trolox g-1 (DPPH)), and a peppermint leaf infusion (0.773 µmol Trolox g-1 (ABTS), 4.71 µmol Trolox g-1 (DPPH)). The conditions of kvass production and the type and amount of the additive influenced the selected physicochemical parameters of the obtained kvasses. The chromatographic analysis confirmed the content of 13 phenolic compounds in kvass with the addition of black chokeberry juice, which was 1.68-1.73 mg/100 mL of the finished product with a 10% share of the additive. The 11 phenolic compounds in kvass with the addition of peppermint infusion were confirmed for 7.65-6.86 mg/100 mL of the finished product with 10% of the additive. Kvass enriched with additives from black chokeberry fruit and peppermint leaves may be a promising new category of functional beverages with health-promoting properties resulting from the content of polyphenol compounds. It could be a better base for enrichment with raw materials that are richer in these compounds than pasteurized products.

Sonication and thermal treatment of pineapple juice: Comparative assessment of the physicochemical properties, antioxidant activities and microbial inactivation

Sonication is a novel processing method that is perceived as a substitute for heat treatment to ensure the safety of juice while reducing the loss of nutrients during processing. The impacts of sonication and thermal processing on pineapple juice, including physicochemical properties, antioxidant activities, and microbial inactivation, were studied. Pineapple juice was sonicated at 100 W and 140 W (for 5, 10 and 15 min) and heat-treated at 70 °C, 80 °C and 90 °C (for 1 min). Results indicated minor alterations in physicochemical characteristics after sonication and thermal processing, while sonication treatment showed better retention of the color, clarity, and browning index of pineapple juice. Moreover, sonication significantly increased the bioactive compounds (total carotenoids, ascorbic acid, phenolics, and flavonoids) and boosted the antioxidant activity of pineapple juice compared to the heat-processed juice. Although sonication reduced the microbial load significantly with the increasing exposure time, it could not thoroughly inactivate microorganisms like thermal treatment. Therefore, optimal sonication processing conditions are required to be determined. This study will help the food processors utilize sonication treatment in pineapple juice processing plants to inactivate microorganisms thoroughly while also boosting the nutritional value.

Effects of Fish Skin Gelatin Hydrolysates Treated with Alcalase and Savinase on Frozen Dough and Bread Quality

Fish skin gelatin, as a waste product of sea bream, was used to obtain fish gelatin hydrolysate (FGH) with the treatment of alcalase (alc) and savinase (sav). The functional properties of FGHs and their usage possibilities in frozen dough bread making were investigated. FGH treated with alc showed a higher emulsifying stability index (189 min), while FGH treated with sav showed greater foaming capacity (27.8%) and fat-binding capacity (1.84 mL/g). Bread doughs were produced using two FGHs (alc and sav) and their combination (FGH-alc + FGH-sav). Using FGH treated with these enzymes individually was more effective than their combination in terms of polyacrylamide gel electrophoresis (SDS-PAGE) results and bread quality (specific volume and hardness). The addition of FGH into bread dough showed no significant effect on bread dough viscoelasticity (tan δ), while the increment level of tan δ value for control dough was higher than the dough containing FGH after frozen storage (-30 °C for 30 days). The highest freezable water content (FW%) was found in control dough (33.9%) (p < 0.05). The highest specific volume was obtained for control fresh bread and bread with FGH-alc, while the lowest volume was obtained for fresh bread containing FGH-sav (p < 0.05). After frozen storage of the doughs, the bread with FGH-alc showed the highest specific volume. FGH addition caused a significant reduction in the L* (lightness) value of fresh bread samples when compared to control bread (p < 0.05). This study suggested that usage of FGH-alc in bread making decreased the deterioration effect of frozen storage in terms of the specific volume and hardness of bread.

Biocosmetics Made with Saccharina latissima Fractions from Sustainable Treatment: Physicochemical and Thermorheological Features

This work deals with the formulation of natural cosmetics enriched with antioxidant fractions from the ultrasound treatment (US) of the brown seaweed Saccharina latissima. The challenge was the development of a cosmetic matrix without jeopardizing the thermorheological features of the creams, adding microparticles containing the antioxidant fractions using two different carriers, mannitol and alginate. The fundamental chemical characteristics of seaweed and the extracts obtained via sonication, as well as the antioxidant properties of the latter, were analyzed. The highest TEAC (Trolox equivalent antioxidant capacity) value was identified for the extracts subjected to the longest processing time using ultrasound-assisted extraction (240 min). A similar yield of microparticle formulation (around 60%) and load capacity (about 85%) were identified with mannitol and alginate as carriers. Color testing of the creams exhibited small total color differences. The rheological results indicated that the testing temperature, from 5 to 45 °C, notably influenced the apparent viscosity of the matrices. All creams were adequately fitted with the two parameters of the Ostwald-de Waele model, with the flow consistency index following an Arrhenius dependency with the testing temperature. Neither hysteresis nor water syneresis was observed in the proposed cosmetics during 6 months of cold storage at 4-6 °C.

Butter from Different Species: Composition and Quality Parameters of Products Commercialized in the South of Spain

Butter is an important product for the dairy industry due to its particular sensory attributes and nutritional value, while the variability of the composition of the fatty acids in the milk can alter the nutritional and physical properties of butter and its acceptance by consumers. Butter is highly appreciated for its distinctive flavor and aroma; however, one of its main drawbacks lies in the difficulty in spreading it at low temperatures. Several types of butter that are present in the market were used in this study. We assessed the variability in the composition of the samples regarding their texture, color properties, and volatile organic compound profiles. We analyzed samples commercially produced from sheep's milk (SB), goat's milk (GB), and cow's milk (CB); samples from the latter species with (CSB) and without salt (CB); and the low-fat (CLB) version. All the physicochemical composition parameters were significantly affected by the effect of the type of butter, although only 29 out of the 45 fatty acids examined were identified in the butter samples analyzed. The textural properties of the butters were influenced by both their solid fat content and the fatty acid profile. In addition, the origin of the milk not only affected the texture parameters but also the color of the butters and the compounds associated with traits such as odor and flavor. Through the multivariate data analysis of butter fatty acids and volatile compound percentages, we observed a clear differentiation of the samples based on the species of origin.

Fresh Chokeberry (Aronia melanocarpa) Fruits as Valuable Additive in Extruded Snack Pellets: Selected Nutritional and Physiochemical Properties

In this paper, the nutritional value and (selected) physiochemical properties of extruded snack pellets enriched with fresh chokeberry (Aronia melanocarpa) fruits were analyzed from the perspective of being a new product for the functional food sector. The purpose of this study was to determine the effect of the addition of fresh chokeberry and variation in content and screw speed on extruded snack pellet basic compositions, fatty acid profiles, antioxidant activity, as well as water absorption and solubility indexes, fat absorption and color profiles. The obtained results revealed a significant increase in antioxidant activity for all samples (above 90% of free radical scavenging) in comparison to potato-based control samples (just over 20% of free radical scavenging). The total phenolic content assay revealed the most valuable results for samples enriched with 30% chokeberry, while Ultra Performance Liquid Chromatography (UPLC) analysis allowed the determination of the most important phenolic acids. Of interest, chokeberry addition decreased the fat absorption index (FAI) after expansion by frying. Moreover, the highest values of crude protein and crude ash were observed in snack pellets supplemented by the application of 30% chokeberry. In such samples, the crude protein content was at the level of 4.75-4.87 g 100 g-1 and crude ash content at 4.88-5.07 g 100 g-1. Moreover, saturated fatty acids (SFA) content was lower in snack pellets with chokeberry addition, and increasing the amount of chokeberry additive from 10% to 30% in extruded snack pellet recipes resulted in more than double an increase in polyunsaturated fatty acids (PUFA) proportion in the total fatty acids.

Pulsed Electric Field (PEF) and High-Power Ultrasound (HPU) in the Hurdle Concept for the Preservation of Antioxidant Bioactive Compounds of Strawberry Juice-A Chemometric Evaluation-Part I

This work investigated the influence of pulsed electric field (PEF) and high-power ultrasound (HPU) combined with hurdle technology to preserve the bioactive compounds (BACs) content and antioxidant activity in stored strawberry juices. PEF was performed at 30 kV cm-1, 100 Hz during 1.5, 3, and 4.5 min, while HPU was performed at 25% amplitude and 50% pulse during 2.5, 5.0, and 7.5 min. Total phenols and hydroxycinnamic acids were the most stable BACs during the hurdle treatment without influence of the duration of both treatments, while flavonols and condensed tannins showed a significant stability dependence with respect to the duration of both treatments. Total phenols were also stable during storage, in contrast to the individual groups of BACs studied. A chemometric approach was used to optimize the parameters of the hurdle treatments with respect to the highest level of BACs and the antioxidant activity of the treated juices. In general, shorter treatment times in the hurdle approach resulted in better stability of BACs and antioxidant activity. The hurdle technology investigated in this study has the strong potential to be an excellent concept for optimizing the operating parameters of PEF and HPU technologies in the preservation of functional foods.

Properties of Paperboard Coated with Natural Polymers and Polymer Blends: Effect of the Number of Coating Layers

Paper is one of the packaging materials that presents a biodegradable character, being used in several areas; however, its barrier properties (gases and fat) and mechanics are reduced, which limits its application. Coating papers with synthetic polymers improve these properties, reducing their biodegradability and recyclability. The objective of this work was to develop and characterize coated paperboard, using the tape casting technique, with different ratios of film form agar-agar/chitosan (AA:CHI, 100:0, 50:50, and 0:100) and different numbers of coating layers (operating times for application of 14.25 min and 28.5 min for one and two layers, respectively). A significant reduction in water absorption capacity was found by applying a 0:100 coating (approximately 15%). Considering all coating formulations, the water vapor permeability reduced by 10 to 60% compared to uncoated paperboard, except for two layers coated with 0:100. The tensile index (independent of AA:CHI) was higher in the machine direction (22.59 to 24.99 MPa) than in the cross-section (11.87-13.01 MPa). Paperboard coated only with chitosan showed superior properties compared to the other formulation coatings evaluated.

Evaluation of the Physical Characteristics and Chemical Properties of Black Soldier Fly (Hermetia illucens) Larvae as a Potential Protein Source for Poultry Feed

The aim of this study was to investigate and compare the effects of different drying methods on the physical and chemical properties of black soldier fly larvae (BSFL) to determine their potential as an alternative protein source in animal feed. The experimental design was a 2 × 3 factorial arrangement in a completely randomized design (BSFL type × drying method), with five replications. The influence of post-harvest procedures was studied, including the different BSFL types (non-defatted and defatted) and drying methods (parabola dome, hot air oven, and microwave). The results showed that the types of BSFL, drying methods, and their interaction significantly (p < 0.001) influenced the feed's physical properties; these included the brightness of color (L* 29.74-54.07; a* 0.40-5.95; b* 9.04-25.57), medium bulk density (381.54-494.58 g/L), free flow with an angle of repose (41.30-45.40°), and small particle size. They significantly (p < 0.001) influenced the nutritive value of BSFL, which contained 42-59% crude protein, 7-14% crude fiber, 9-30% ether extract, and 5035-5861 kcal/kg of energy. Overall, both BSFL types and all the drying methods resulted in a slight variation in the proximate composition. However, a microwave and a hot-air oven were considered the most suitable methods for producing BSFL powder because of the high levels of nutrients retained and the improved physical parameters when compared to a parabola dome. This characterization of the physical and chemical composition of BSFL represents a preliminary methodology that could be used to initially preprocess larvae for use as an alternative protein source in animal feed and for other applications.

Sorghum Flour Features Related to Dry Heat Treatment and Milling

Heat treatment of sorghum kernels has the potential to improve their nutritional properties. The goal of this study was to assess the impact of dry heat treatment at two temperatures (121 and 140 °C) and grain fractionation, on the chemical and functional properties of red sorghum flour with three different particle sizes (small, medium, and large), for process optimization. The results showed that the treatment temperature had a positive effect on the water absorption capacity, as well as the fat, ash, moisture and carbohydrate content, whereas the opposite tendency was obtained for oil absorption capacity, swelling power, emulsion activity and protein and fiber content. Sorghum flour particle size had a positive impact on water absorption capacity, emulsion activity and protein, carbohydrate and fiber content, while oil absorption capacity, swelling power and fat, ash and moisture content were adversely affected. The optimization process showed that at the treatment temperature at 133 °C, an increase in fat, ash, fiber and carbohydrate content was experienced in the optimal fraction dimension of red sorghum grains. Moreover, the antioxidant performance showed that this fraction produced the best reducing capability when water was used as an extraction solvent. Starch digestibility revealed a 22.81% rise in resistant starch, while the thermal properties showed that gelatinization enthalpy was 1.90 times higher compared to the control sample. These findings may be helpful for researchers and the food industry in developing various functional foods or gluten-free bakery products.

Quality Assessment of Burdekin Plum (Pleiogynium timoriense) during Ambient Storage

Pleiogynium timoriense, commonly known as Burdekin plum (BP), is among many Australian native plants traditionally used by Indigenous people. However, only limited information is available on the nutritional and sensory quality of BP grown in Australia as well as its changes during storage. Therefore, this study evaluated the quality of BP during one week of ambient storage (temperature 21 °C, humidity 69%). Proximate analysis revealed a relatively high dietary fiber content in BP (7-10 g/100 g FW). A significant reduction in fruit weight and firmness (15-30% and 60-90%, respectively) with distinguishable changes in flesh color (ΔE > 3) and an increase in total soluble solids (from 11 to 21 °Brix) could be observed during storage. The vitamin C and folate contents in BP ranged from 29 to 59 mg/100g FW and 0.3 to 5.9 μg/100g FW, respectively, after harvesting. A total phenolic content of up to 20 mg GAE/g FW and ferric reducing antioxidant power of up to 400 μmol Fe2+/g FW in BP indicate a strong antioxidant capacity. In total, 34 individual phenolic compounds were tentatively identified in BP including cyanidin 3-galactoside, ellagic acid and gallotannins as the main phenolics. Principle component analysis (PCA) of the quantified phenolics indicated that tree to tree variation had a bigger impact on the phenolic composition of BP than ambient storage. Sensory evaluation also revealed the diversity in aroma, appearance, texture, flavor and aftertaste of BP. The results of this study provide crucial information for consumers, growers and food processors.

Physicochemical Evaluation of Personal Care Products Developed with Chondrus crispus Fractions Processed by Ecofriendly Methodologies

Novel personal care products are necessary to cope with the growing market demand for sustainable green products. In this context, this work deals with the formulation and fundamental physicochemical and rheological characterization of different natural personal care products using bioactive fractions from Chondrus crispus red macroalgae extracted under optimized green conditions. Body milks, body oils and shampoos were supplemented with soluble extracts with antioxidant features recovered after hydrothermal (200 °C) and microwave (170 °C)- and ultrasound (80 °C)-assisted extraction of the red macroalgae used as raw material. Formulated products were also compared with those prepared using (±)-α-tocopherol and butylhydroxytoluene standards. Body scrubs were formulated with the remaining solids (<2.25%) after microwave hydrodiffusion and gravidity treatment of the macroalgae. Results indicated that selected extracts provided personal care products with similar or even better physicochemical, color and viscous features than those supplemented with (±)-α-tocopherol or butylhydroxytoluene commercial antioxidants. Rheological profiles indicated that it is possible to develop personal care products with adequate viscous behavior (102−105 mPa s, at 1 s−1), comparable with their synthetic counterparts. To conclude, the addition of antioxidant extracts led to lower apparent viscosity values suggesting an advantage from the skin applicability point of view, jointly with the absence of both the hysteresis phenomenon and water syneresis of the proposed formulations.

Development of active edible coatings based on fish gelatin enriched with Moringa oleifera extract: Application in fish (Mustelus mustelus) fillet preservation

An edible coating was developed using gelatin extracted from the skin of gray triggerfish (Balistes capriscus) and applied to the fillet of the smooth-hound shark (Mustelus mustelus). Moringa oleifera leaf extract was added to gelatin coating solution to improve its preservative properties. The phenolic profiles and antioxidant and antibacterial activities of M. oleifera extracts were determined. Phenolic acids constituted the largest group representing more than 77% of the total compounds identified in the ethanol/water (MOE/W) extract, among which the quinic acid was found to be the major one (31.48 mg/g extract). The MOE/W extract presented the highest DPPH• scavenging activity (IC50 = 0.53 ± 0.02 mg/ml) and reducing (Fe3+) power (EC0.5 = 0.57 ± 0.02 mg/ml), as well as interesting inhibition zones (20-35 mm) for the most tested strains. Coating by 3% of gelatin solution significantly reduced most deterioration indices during chilled storage, such as malondialdehyde (MDA), total volatile basic nitrogen (TVB-N), weight loss, pH, and mesophilic, psychrophilic, lactic, and H2S-producing bacterial counts. Interestingly, coating with gelatin solution containing MOE/W extract at 20 μg/ml was more effective than gelatin applied alone. Compared with the uncoated sample, gelatin-MOE/W coating reduced the weight loss and MDA content by 26% and 70% after 6 days of storage, respectively. Texture analysis showed that the strength of uncoated fillet increased by 46%, while the strength of fillet coated with gelatin-MOE/W only increased by 12% after 6 days of storage. Fish fillet coated with gelatin-MOE/W had the highest sensory scores in terms of odor, color, and overall acceptability throughout the study period.

Design consideration and modelling studies of ultrasound and ultraviolet combined approach for shelf-life enhancement of pine apple juice

Although both ultraviolet (UV) radiation and ultrasound (US) treatment have their capabilities in microbial inactivation, applying any one method alone may require a high dose for complete inactivation, which may affect the sensory and nutritional properties of pineapple juice. Hence, this study was intended to analyse and optimise the effect of combined US and UV treatments on microbial inactivation without affecting the selected quality parameters of pineapple juice. US treatment (33 kHz) was done at three different time intervals, viz. 10 min, 20 min and 30 min., after which, juice samples were subjected to UV treatment for 10 min at three UV dosage levels, viz. 1 J/cm2, 1.3 J/cm2, and 1.6 J/cm2. The samples were evaluated for total colour difference, pH, total soluble solids (TSS), titrable acidity (TA), and ascorbic acid content; total bacterial count and total yeast count; and the standardization of process parameters was done using Response Surface Methodology and Artificial Neural Network. The results showed that the individual, as well as combined treatments, did not significantly impact the physicochemical properties while retaining the quality characteristics. It was observed that combined treatment resulted in 5 log cycle reduction in bacterial and yeast populations while the individual treatment failed. From the optimization studies, it was found that combined US and UV treatments with 22.95 min and1.577 J/cm2 ensured a microbiologically safe product while retaining organoleptic quality close to that of fresh juice.

Chestnut Lily Beverage (CLB) Processing Using Ultrasound-Assisted Nisin: Microbiota Inactivation and Product Quality

We evaluated the effects of ultrasound (US) and ultrasound combined with nisin (NUS) treatments on the properties of chestnut lily beverages (CLB) using conventional thermal pasteurisation (TP) as a control. After CLB samples were treated with US and NUS for 20, 40, or 60 min, the polyphenol oxidase activity (PPO), microbial inactivation effect, colour, pH value, total phenolic content, and antioxidant capacity of the CLB were observed. It was found that the inactivation rate of PPO in CLB after NUS treatment was higher than that in the US, indicating that NUS treatment aggravated PPO inactivation. Treatment time was important in the inactivation of microorganisms by US and NUS; NUS had a lethal synergistic lethal effect on microorganisms in CLB and when compared with US, NUS reduced changes in the CLB colour value. Notably, the total phenolic content and antioxidant capacity of the US- and NUS-treated CLB significantly increased relative to the TP group. These results that suggest NUS has a potential application value in the development of CLB because it reduces the risk of microorganism contamination and helps improve the quality of CLB. This study provides technical support and a theoretical basis for the improved production of CLB.

Effect of the Application of a Coating Native Potato Starch/Nopal Mucilage/Pectin on Physicochemical and Physiological Properties during Storage of Fuerte and Hass Avocado (Persea americana)

The avocado fruit is an agro-industrial product with high export demand in Peru due to its sensory and nutritional qualities, which can be affected during storage. The study aimed to evaluate the effect of the application of a coating formulated with potato starch (Solanum tuberosum ssp andigena), nopal mucilage (Opuntia ficus indica), and pectin on the physicochemical and physiological properties during the storage of Fuerte and Hass avocados. Samples were taken in their harvest state from the plantation in “Occobamba”, which is cultivated by the Avocado Producers Association in Chincheros, Apurímac, Peru. Physicochemical properties (titratable acidity, pH, total soluble solids) and physiological properties (weight loss, firmness, and color L* a* b*) were determined during 20 days of storage at 20 °C. The elaborated films present high transparency and low aw values. In the coated avocado of the Hass and Fuerte varieties, acidity and total soluble solids decreased significantly (p-value < 0.05) during the storage time. Weight loss and firmness of coated fruits decrease to a lesser extent. Luminosity L*, color index, and color variation showed better attributes for the coated samples. The use of coatings made with potato starch, nopal mucilage, and pectin allows the physicochemical and physiological properties of avocado fruits to be maintained for a longer time during storage.

Comparative evaluation of physicochemical profile and bioactive properties of red edible seaweed Chondrus crispus subjected to different drying methods

Dehydration of the edible seaweed Chondrus crispus was performed by freeze-drying, conventional oven-drying and emerging microwave hydrodiffusion and gravity (MHG). In this work, the drying kinetics and modelling, estimating specific energy consumption and environmental impact of distinct processes were tested. Color and microstructural features of the dried macroalgae were also evaluated, as well as their nutritive characterization, chemical profile and bioactive potential (antioxidant and antimicrobial activities). Moreover, collected liquid phases from both the defrosted and MHG treated samples were also characterized. All methodologies provided solid phases with an adequate final moisture content. MHG significantly reduced the needed time, specific energy consumption and environmental impact, providing C. crispus with intermediate color and histological structure characteristics. Overall, this trend was also defined to tested chemical parameters and bioactivities. MHG provided aqueous extracts with potential bioactive compounds from this red alga, increasing the efficiency of this drying method.

Quality changes of repeatedly fried palm oil and extracted oil from fried loach

Fried loach is a kind of popular flavor food. The effects of repeated frying on peroxide value (PV), acid value (AV), P-anisidine value (P-AV), total polar components (TPC) and free fatty acids (FFA) of palm oil and extracted oil from fried loach (EOL) were studied. The loach was fried in palm oil at 170 °C for 3 min and the frying was repeated 10 times. The oil from fried loach was collected and analyzed. The results showed that the TPC of palm oil exceeded the standard limit (3 mg/g) when frying 10 times. The PV and TPC of EOL were unqualified after 9 and 4 times frying (19.17 meq O2/kg and 31% respectively). The AV of the EOL reached 2.46 mg/g after 9 times frying. Palm oil has better frying performance than EOL because of its balanced proportion of saturated and unsaturated fatty acids. Palm oil can be used for 9 times frying, while the EOL has been damaged after 4 times.

Radio frequency pasteurization and heating uniformity of canned pineapple

This research investigated heating uniformity and pasteurization of canned pineapple using radio frequency (RF) energy. Experiments were conducted in a 6 kW, 27.12 MHz pilot-scale RF system. Results showed that the temperature difference was more than 16°C, and the standard deviation was 4.38°C at the end of heating when using RF heating alone. Water bath-assisted RF (WRF) heating effectively improved the heating uniformity, the temperature difference was less than 7°C and the standard deviation was 2.52°C at the end of heating in the condition of electrode gap (210 mm), chord length of the fruit block (26 mm), and the initial temperature of sugar solution (80°C). When the total number of colonies reached 4-log reduction, water bath (WB) heating alone needed 660 s, and WRF heating needed 180 s. Vitamin C, hardness, and color of fruit blocks were well preserved using WRF heating compared with WB alone. PRACTICAL APPLICATION: This study shows that the pasteurization of canned food by radio frequency heating can achieve better food quality than the traditional pasteurization methods. Therefore, this research can promote the application of radio frequency heating technology in canned food pasteurization.