Contribution of monophenols to beer flavour based on flavour thresholds, interactions and recombination experiments

Quantitative determination of vanillin and its detection threshold in sake

Vanillin is naturally occurring in various food products, including alcoholic beverages; however, its contribution to the aroma of sake is unclear. In this study, an HPLC-MS/MS quantification method was developed and validated by linearity, precision, and recovery, and it was applied to 115 bottles of highly diversified sake. Furthermore, the odor detection threshold of vanillin in sake was determined. Notably, the established method exhibited great linearity (5-1500 μg/L), with a R2 >0.99, and the limit of detection and limit of quantification were 1.7 and 5.5 μg/L, respectively. The spiked recoveries of vanillin ranged from 96.2% to 97.8%, with relative standard deviation ˂ 6.22%. Results revealed trace amounts to 29.9 μg/L of vanillin in the premium young sake, below the detection threshold (78.9 μg/L), whereas aged sake (43 bottles, 3-56 years aging) exhibited varied concentrations from trace amounts to 1727.5 μg/L of vanillin, notably peaking in a 20-year oak barrel-aged sake. The concentration of vanillin in most of the ambient-temperature-aged sake exceeded the detection threshold after 11-15 years of aging. The proposed method facilitates accurate vanillin quantification in sake, crucial for evaluating its flavor impact. Moreover, the discoveries provide a theoretical basis for the sensory exploration of sake aromas and equip the brewing industry with insights for modulating vanillin synthesis during sake aging.

Evaluation of perceptual interactions between key aldehydes in Kung Pao Chicken

Aldehydes are the strongest and most abundant aromatic compounds in Kung Pao Chicken. However, the perceptual interactions between these aldehydes are not fully understood. Therefore, the flavor contribution of nine key aldehydes was estimated by determining thresholds. Except for benzaldehyde, the thresholds of all aldehydes measured in tasteless chicken matrices (TM) were significantly larger than their comparable values in water. Based on these results, the perceptual interactions of nine aldehydes were evaluated using S-curves and σ-τ plots. The interactions indicated that 31 of their 36 binary mixtures exhibited additive effects, three had masking effects, while two had synergistic effects. Recombination experiments showed that the addition of aldehydes lowered the odor threshold of aldehyde reconstitution (AR), thereby enhancing the aroma intensity of AR. These findings contribute to a better understanding of Kung Pao Chicken's aroma and can be used to improve its aroma quality.

Characterization of Key Odorants in Chinese Texiang Aroma and Flavor Type Baijiu (Chinese Liquor) by Means of a Molecular Sensory Science Approach

The popularity of texiang aroma type baijiu (liquor), known for its unique production technology and multilayered flavor, has been steadily increasing among consumers. So far, no research has determined its key aroma compounds for characterizing the unique flavor, which is the purpose of this paper. Using gas chromatography-olfactometry (GC-O) coupled with the GC-mass spectrometry (GC-MS) method, 87 aroma-active compounds were identified and screened out with intensity values ≥2.0. 1,1,6-Trimethyl-1,2-dihydronaphthalene (TDN) was first confirmed by GC-O in Chinese liquor. According to a quantitative study and odor activity values (OAVs), 42 odorants were determined as important aroma compounds. These odorants were recombined based on quantitative concentrations, successfully simulating the overall aroma profile. Omission experiments verified ethyl hexanoate, β-damascenone, and 2-furfuryl ethyl ether as the key aroma compounds and revealed that ethyl acetate, furfural, and ethyl 2-phenylacetate were important aroma compounds to the overall flavor of texiang aroma and flavor type liquor.

Exploring the effects of mixture composition factors and perceptual interactions on the perception of icewine odor: An olfactometer-based study

The perception of food odor, derived from complex mixtures of odorants, remains poorly understood. This study investigated how key odorants of icewine influence odor mixture perception and mixture-induced perceptual interactions. A multichannel olfactometer was used to deliver 90 mixtures to 36 trained participants who used a Rate-All-That-Apply method to rate the odor samples. Results showed that adding odorants to a mixture affected both the characteristic odor of the individual component and other odor characteristics, revealing specific perceptual interactions. Combining up to six odorants with icewine odor influenced a maximum of two odor characteristics in the mixture, regardless of the specific combination. Interestingly, adding odorants had a stronger impact on the overall mixture odor profile than omitting them, particularly when manipulating fewer than three odorants. These findings emphasize the complexity of odor mixture perception and provide new insights into the influence of key odorants on the aroma of wine.

Synergy Effect between Fruity Esters and Potential Odorants on the Aroma of Hutai-8 Rose Wine Revealed by Threshold, S-Curve, and σ-τ Plot Methods

To analyze the contribution of fruity esters on wine aroma perception, the interaction levels between 12 esters and key odorants of Hutai-8 rose wine were investigated using threshold, S-curve, and σ-τ plot methods, and the aroma enhancement performance of esters was verified by using addition experiments. Results indicated that esters enhance the sweet, floral, and fruity traits of citronellol, β-damascenone, and nerolidol, especially at subthreshold levels. Meanwhile, esters increased the floral and fruity characteristics of key fermentative odorants mainly by additive effects, with acetate esters possessing a better synergy ability. In contrast, the synergy levels between binary esters were less influenced by the concentration but more by the compound structure and aroma. Additionally, moderately subjoining the type and content of esters in wine proved that their synergy effects improved the sweet trait and decreased the sour fruit trait. This finding characterized that the contribution of esters to the wine aroma was obtained by the combined synergy of odorants at a suitable concentration.

Identification of compounds that enhance bitterness of coffee brew

The bitterness perception of coffee is a key attribute that impacts consumer acceptance. Nontargeted liquid chromatography/mass spectrometry (LC/MS) flavoromics analysis was applied to identify compounds that enhance the bitter perception of roasted coffee brew. Orthogonal partial least squares (OPLS) analysis was used to model the comprehensive chemical profiles and sensory bitter intensity ratings of fourteen coffee brews with good fit and predictivity. Five compounds that were highly predictive and positively correlated to bitter intensity were selected from the OPLS model, further isolated, and purified using preparative LC fractionation. Sensory recombination testing demonstrated that five compounds significantly enhanced the bitter perception of coffee when presented as a mixture, but not when presented individually. In addition, a set of roasting experiments revealed the five compounds were generated during the coffee roasting process.

Study of a First Approach to the Controlled Fermentation for Lambic Beer Production

Non-Saccharomyces yeasts represent a great source of biodiversity for the production of new beer styles, since they can be used in different industrial areas, as pure culture starters, in co-fermentation with Saccharomyces, and in spontaneous fermentation (lambic and gueuze production, with the main contribution of Brettanomyces yeast). The fermentation process of lambic beer is characterized by different phases with a characteristic predominance of different microorganisms in each of them. As it is a spontaneous process, fermentation usually lasts from 10 months to 3 years. In this work, an attempt was made to perform a fermentation similar to the one that occurred in this process with lactic bacteria, Saccharomyces yeast and Brettanomyces yeast, but controlling their inoculation and therefore decreasing the time necessary for their action. For this purpose, after the first screening in 100 mL where eight Brettanomyces yeast strains from D.O. "Ribeira Sacra" (Galicia) were tested, one Brettanomyces bruxellensis strain was finally selected (B6) for fermentation in 1 L together with commercial strains of Saccharomyces cerevisiae S-04 yeast and Lactobacillus brevis lactic acid bacteria in different sequences. The combinations that showed the best fermentative capacity were tested in 14 L. Volatile compounds, lactic acid, acetic acid, colour, bitterness, residual sugars, ethanol, melatonin and antioxidant capacity were analysed at different maturation times of 1, 2, 6 and 12 months. Beers inoculated with Brettanomyces yeast independently of the other microorganisms showed pronounced aromas characteristic of the Brettanomyces yeast. Maturation after 12 months showed balanced beers with "Brett" aromas, as well as an increase in the antioxidant capacity of the beers.

The Phenolic Compounds' Role in Beer from Various Adjuncts

BACKGROUND

The present article considers the influence of malt with various adjuncts on beer organic compounds and taste profile composition, with more attention paid to the phenol complex change. The topic under consideration is relevant since it studies the interactions of phenolic compounds with other biomolecules, and expands the understanding of the adjuncts organic compounds contribution and their joint effect on beer quality.

METHODS

Samples of beer were analyzed at a pilot brewery using barley and wheat malts, barley, rice, corn and wheat, and then fermented. The beer samples were assessed by industry-accepted methods and using instrumental analysis methods (high-performance liquid chromatography methods-HPLC). The obtained statistical data were processed by the Statistics program (Microsoft Corporation, Redmond, WA, USA, 2006).

RESULTS

The study showed that at the stage of hopped wort organic compounds structure formation, there is a clear correlation between the content of organic compounds and dry substances, including phenolic compounds (quercetin, catechins), as well as isomerized hop bitter resines. It is shown that the riboflavin content increases in all adjunct wort samples, and mostly with the use of rice-up to 4.33 mg/L, which is 9.4 times higher than the vitamin levels in malt wort. The melanoidin content in the samples was in the range of 125-225 mg/L and its levels in the wort with additives exceeded the malt wort. Changes in β-glucan and nitrogen with thiol groups during fermentation occurred with different dynamics and depending on the adjunct's proteome. The greatest decrease in non-starch polysaccharide content was observed in wheat beer and nitrogen with thiol groups content-in all other beer samples. The change in iso-α-humulone in all samples at the beginning of fermentation correlated with a decrease in original extract, and in the finished beer there was no correlation. The behavior of catechins, quercetin, and iso-α-humulone has been shown to correlate with nitrogen with thiol groups during fermentation. A strong correlation was shown between the change in iso-α-humulone and catechins, as well as riboflavin and quercetin. It was established that various phenolic compounds were involved in the formation of taste, structure, and antioxidant properties of beer in accordance with the structure of various grains, depending on the structure of its proteome.

CONCLUSIONS

The obtained experimental and mathematical dependences make it possible to expand the understanding of intermolecular interactions of beer organic compounds and take a step toward predicting the quality of beer at the stage of using adjuncts.

Lachancea thermotolerans, an Innovative Alternative for Sour Beer Production

The interest in and growth of craft beer has led to an intense search for new beers and styles. The revival of traditional styles has sometimes been hampered by the use of microorganisms such as lactic acid bacteria. Therefore, studies on alternative yeasts for the production of this style of beer have increased. In this work and together with previous studies carried out with yeasts isolated from Madrid agriculture (from grapes, must, wine, vineyards and wineries), the capacity of 10 yeast strains, belonging to the genus Lachancea thermotolerans, for the production of sour beer has been determined. For this purpose, different fermentation scale-ups (100 mL, 1 L and 100 L) have been performed and their fermentation capacity, aroma compound production (33 volatile compounds by GC), organoleptic profile (trained tasting panel and consumers), melatonin production (HPLC) and antioxidant capacity have been studied. Beer fermented with yeast strain CLI 1232 showed a balanced acidity with a fruity aromatic profile and honey notes. On the other hand, the beer fermented with strain 1-8B also showed a balanced acidity, but less fruity and citric flavour than CLI 1232 strain. Finally, the yeast strain selected by the consumers (CLI 1232) was used for beer production at industrial scale and the market launch of a sour beer.

Unravelling the key aroma compounds in the characteristic fragrance of Dendrobium officinale flowers for potential industrial application

Dendrobium officinale Kimura et Migo, one of the most important orchids because of its medicinal and edible value, has a typical Dendrobium Sw. flora scent, which has great application potential and commercial value to be characterized. The aroma-active compounds originating from D. officinale fresh flowers (DFF) were investigated using a sensomics approach. A combined solid phase microextraction and solvent-assisted flavor evaporation method were used to accurately capture the overall aromatic profile. Exactly 34 odorants were detected and identified by aroma extract dilution analysis (AEDA) coupled with gas chromatography/olfactometry-mass spectrometry (GC/O-MS) in DFF, of which nine odorants had a flavor dilution (FD) factor ≥27. All 34 odorants were further quantified. The odor activity values (OAVs) were calculated with the highest value of 7444, in which 18 compounds were confirmed to be key odorants, including 1-octen-3-ol, hexanal, nonanal, phenylacetaldehyde, linalool, 4-oxoisophorone, theaspirane, methyl salicylate, etc. Among the studies above, 42 out of 78 volatiles and 14 out of 34 odorants were identified in DFF for the first time. Then, the aroma profile of the DFF was simulated successfully by aroma recombination experiments based on the quantitation results, and the omission test suggested that alcohols are the decisive type of compounds in the DFF key odorants. In addition, a progressive addition test showed that the aroma recombinate prepared with 18 reference key odorants was able to reconstruct the characteristic aroma of DFF. In comparison, the recombinate constituted by mixing all 34 reference odorants in the same concentrations as determined in the DDF sample could mimic the flower scent and closely match the sensory attributes of the original D. officinale fresh flower.

Impact of Non-Saccharomyces Wine Yeast Strains on Improving Healthy Characteristics and the Sensory Profile of Beer in Sequential Fermentation

The use of non-Saccharomyces yeasts in brewing is a useful tool for developing new products to meet the growing consumer demand for innovative products. Non-Saccharomyces yeasts can be used both in single and in mixed fermentations with Saccharomyces cerevisiae, as they are able to improve the sensory profile of beers, and they can be used to obtain functional beers (with a low ethanol content and melatonin production). The aim of this study was to evaluate this capacity in eight non-Saccharomyces strains isolated from Madrid agriculture. For this purpose, single fermentations were carried out with non-Saccharomyces strains and sequential fermentations with non-Saccharomyces and the commercial strain SafAle S-04. The Wickerhamomyces anomalus strain CLI 1028 was selected in pure culture for brewing beer with a low ethanol content (1.25% (v/v)) for its fruity and phenolic flavours and the absence of wort flavours. The best-evaluated strains in sequential fermentation were CLI 3 (Hanseniaspora vineae) and CLI 457 (Metschnikowia pulcherrima), due to their fruity notes as well as their superior bitterness, body, and balance. Volatile compounds and melatonin production were analysed by GC and HPLC, respectively. The beers were sensory-analysed by a trained panel. The results of the study show the potential of non-Saccharomyces strains in the production of low-alcohol beers, and as a flavour enhancement in sequential fermentation.

New Approaches for the Fermentation of Beer: Non-Saccharomyces Yeasts from Wine

Non-Saccharomyces yeasts represent a very attractive alternative for the production of beers with superior sensory quality since they are able to enhance the flavour of beer. Furthermore, they can produce beers with low ethanol content due to the weak fermentative capacity of a large percentage of non-Saccharomyces species. The objective of this study was to evaluate the ability of 34 non-Saccharomyces yeast strains isolated from Madrilenian agriculture to produce a novel ale beer. The non-Saccharomyces yeast strains were screened at two scales in the laboratory. In the first screening, those with undesirable aromas were discarded and the selected strains were analysed. Thirty-three volatile compounds were analysed by GC, as well as melatonin production by HPLC, for the selected strains. Thirteen strains were then fermented at a higher scale in the laboratory for sensory evaluation. Only yeast strains of the species Schizosaccharomyces pombe and Lachancea thermotolerans were able to complete fermentation. Species such as Torulaspora delbrueckii, Metschnikowia pulcherrima, Wickerhamomyces anomalus, Hanseniaspora vineae, and Hanseniaspora guilliermondii could be used both for production of low ethanol beers and co-fermentation with a Saccharomyces yeast to improve the organoleptic characteristics of the beer. In addition, for these strains, the levels of melatonin obtained were higher than the concentrations found for Saccharomyces strains subjected to the same study conditions. The selected strains can be used in future trials to further determine their viability under different conditions and for different purposes.

Aroma Clouds of Foods: A Step Forward to Unveil Food Aroma Complexity Using GC × GC

The human senses shape the life in several aspects, namely well-being, socialization, health status, and diet, among others. However, only recently, the understanding of this highly sophisticated sensory neuronal pathway has gained new advances. Also, it is known that each olfactory receptor cell expresses only one type of odorant receptor, and each receptor can detect a limited number of odorant substances. Odorant substances are typically volatile or semi-volatile in nature, exhibit low relative molecular weight, and represent a wide variety of chemical families. These molecules may be released from foods, constituting clouds surrounding them, and are responsible for their aroma properties. A single natural aroma may contain a huge number of volatile components, and some of them are present in trace amounts, which make their study especially difficult. Understanding the components of food aromas has become more important than ever with the transformation of food systems and the increased innovation in the food industry. Two-dimensional gas chromatography and time-of-flight mass spectrometry (GC × GC-ToFMS) seems to be a powerful technique for the analytical coverage of the food aromas. Thus, the main purpose of this review is to critically discuss the potential of the GC × GC–based methodologies, combined with a headspace solvent-free microextraction technique, in tandem with data processing and data analysis, as a useful tool to the analysis of the chemical aroma clouds of foods. Due to the broad and complex nature of the aroma chemistry subject, some concepts and challenges related to the characterization of volatile molecules and the perception of aromas will be presented in advance. All topics covered in this review will be elucidated, as much as possible, with examples reported in recent publications, to make the interpretation of the fascinating world of food aroma chemistry more attractive and perceptive.

Comparison of Phenolic Profile of Balsamic Vinegars Determined Using Liquid and Gas Chromatography Coupled with Mass Spectrometry

Balsamic vinegar is one of the best known and most popular types of vinegar, and it is a rich source of polyphenolic compounds. The quality of balsamic vinegar as well as the content of phenolic substances vary depending on the production method. In the present work, we have developed a method for comprehensive characterization of the content of phenolic compounds in balsamic vinegars based on the combination of gas chromatography (GC) and high-performance liquid chromatography (HPLC) coupled with mass spectrometric detection in single mode (MS) and tandem mode (MS/MS). In total, 14 samples of different types of balsamic vinegar were analyzed without difficulty in sample preparation. The separation conditions and detection parameters of HPLC-MS/MS were optimized and used for the determination of 29 phenolic compounds and 6 phenolic acids. The profile of phenolic compounds was completed by semi-quantitative analysis of volatile organic compounds using GC-MS after optimized headspace solid-phase microextraction. Gallic acid, protocatechuic acid, caffeic acid, and p-coumaric acid have been identified as the major phenolic compounds in balsamic vinegars.

Accurate Determination of 12 Lactones and 11 Volatile Phenols in Nongrape Wines through Headspace-Solid-Phase Microextraction (HS-SPME) Combined with High-Resolution Gas Chromatography-Orbitrap Mass Spectrometry (GC-Orbitrap-MS)

This paper clarifies the contribution of lactones and volatile phenols to the aroma of nongrape wine. A target method for the simultaneous determination of these two kinds of volatiles in nongrape wines was developed using headspace-solid-phase microextraction (HS-SPME) combined with high-resolution gas chromatography-Orbitrap mass spectrometry (GC-Orbitrap-MS). A high-resolution mass spectrometry database including 12 lactones and 11 volatile phenols was established for qualitative accuracy. Different matrix-matched calibration standards should be prepared for specific samples due to the matrix effects. The method was successfully validated and applied in three nongrape wines. Hawthorn wine contained more lactones (δ/γ-hexalactone, δ/γ-nonalactone, δ/γ-decalactone, γ-undecalactone, δ/γ-dodecalactone, C10 massoia lactone, and whiskey lactone), while blueberry wine contained more volatile phenols (especially 4-vinylguaiacol and 4-ethylguiaiacol). Goji berry wines contained certain concentrations of δ-nonalactone, γ-nonalactone, δ-hexalactone, and 3-ethyl phenol. This study demonstrated that HS-SPME-GC-Orbitrap-MS can be applied for the accurate quantification of trace aroma compounds such as lactones and volatile phenols in fruit wines.

Wine Saccharomyces Yeasts for Beer Fermentation

Multiple studies in recent years have shown the potential of Saccharomyces wild yeasts to produce craft beers with new flavour profiles and other desirable properties. Yeasts isolated from food (wine, bread, kombucha…) have shown potential promise for application in brewing. The aim of this study is to evaluate the ability of 141 Saccharomyces yeast strains isolated from the Madrilenian agriculture (from grapes, must, wine, vineyard, and cellars) to produce a novel ale beer. Fermentation activity of the strains was compared against the commercial strain Saccharomyces cerevisiae Safale S-04. In addition to the other aspects such as melatonin production, thirty-three volatile compounds belonging to higher alcohols, esters, aldehydes/cetones, acids, lactones and phenolic groups, were analysed by GC for selection of the strains. Ten strains were finally chosen, among which the most relevant was the strain G 520 showing a higher production of esters, higher alcohols and acids compared with S-04. The apparent attenuation for this strain was lower than commercial strain, which translates into more residual sugars. Furthermore, G 520 was more capable of producing significantly higher amounts of melatonin studied by HPLC, as well as showing a higher antioxidant capacity. Consumer study showed that G 520 strain could be used to produce a potential beer that has a place in the current market.

Compositional Changes in Smoke-Affected Grape Juice as a Consequence of Activated Carbon Treatment and the Impact on Phenolic Compounds and Smoke Flavor in Wine

An increase in bushfires and wildfires globally and consequent smoke exposure of grapevines has seen an elevated need for remediation options to manage the impact of smoke taint in the wine industry. Two commercially available activated carbons (PS1300 and CASPF) were evaluated at 1, 2, and 4 g/L with juice from smoke-affected Pinot Noir and Chardonnay grapes. PS1300 and CASPF treatments removed up to 75 and 92% of the phenolic glycosides in the smoke-affected Pinot Noir rosé juice, respectively, and both carbons removed virtually all (i.e., 98-99%) of the phenolic glycosides in the smoke-affected Chardonnay juice at the highest dose rate (4 g/L). The free volatile phenols in the wines were similarly lower in concentration following treatment. Sensory analysis confirmed that the wines made from carbon fined juice had reduced smoke aroma and flavor compared to those from the nontreated controls. However, desirable sensory properties such as color and fruity attributes were also negatively affected by the treatment. The dose rate should be optimized in industry practice to find a balance between reducing the intensity of smoke-related sensory attributes while maintaining or enhancing positive attributes.

A New Classification of Perceptual Interactions between Odorants to Interpret Complex Aroma Systems. Application to Model Wine Aroma

Although perceptual interactions are usually mentioned and blamed for the difficulties in understanding the relationship between odorant composition and aromatic sensory properties, they are poorly defined and categorised. Furthermore, old classifications refer mainly to effects on the odour intensity of the mixture of dissimilar non-blending odours and do not consider odour blending, which is one of the most relevant and influential perceptual interactions. Beginning with the results from classical studies about odour interaction, a new and simple systematic is proposed in which odour interactions are classified into four categories: competitive, cooperative, destructive and creative. The first categories are most frequent and display a mild level of interaction, being characterised mostly by analytical processing. The last two are less frequent and activate (or deactivate) configurational processes of object recognition with deep effects on the quality and intensity of the perception. These interactions can be systematically applied to interpret the formation of sensory descriptors from the odorant composition, suggesting that qualitatively the system works. However, there is a lack of quantitative data to work with odour intensities reliably, and a pressing need to systematise the effects of creative interactions.

Beer Polyphenols—Bitterness, Astringency, and Off-Flavors

The acceptance of beer among consumers is most influenced by the taste and aroma. Polyphenols are widely responsible for both. Whereas polyphenols do not always result in a positive flavor and taste, they can surely impart certain off-flavors, which will be mentioned in this paper. However, the aftertaste is an important component of the beer-tasting experience and acceptance. The aftertaste, including astringency, may largely influence consumers’ consumption preference and behavior. Bitterness is one of the main, desirable characteristics of beer, but to an untrained consumer, it can often be mistaken with astringency. This review aims to describe the differences between these two properties. Both attributes derive from the same beer components, polyphenols from barley and hop, but there is a distinctive difference between them. To understand the complexity of bitterness and astringency, polyphenols behavior, characteristics, and stability during the brewing process are also described in this review.

Perceptual interactions among food odors: Major influences on odor intensity evidenced with a set of 222 binary mixtures of key odorants

This study explored the impact of perceptual interactions on the odor intensity of 222 binary mixtures designed from 72 odorants found in food products. Odor intensity was rated by 30 trained subjects. The results showed that in most cases, the components' odor was perceived within the mixture and their intensity remained the same as in the unmixed situation in 54.3% of cases. Masking was the second major effect (44.8%) and occurred more frequently when components' pleasantness was significantly different. Synergy occurred in a small number of cases (0.9%) and only for four compounds. The overall odor intensity of the mixture was determined to be equal to the strongest component in most cases (73.9%), while partial addition was observed as the second most frequent effect (21.7%), especially when the components had equal intensity. Overall, this work provides general rules about the outcome to expect when mixing key components of food aromas.

The Role of Bioactive Phenolic Compounds on the Impact of Beer on Health

This review reports recent knowledge on the role of ingredients (barley, hop and yeasts), including genetic factors, on the final yield of phenolic compounds in beer, and how these molecules generally affect resulting beer attributes, focusing mainly on new attempts at the enrichment of beer phenols, with fruits or cereals other than barley. An entire section is dedicated to health-related effects, analyzing the degree up to which studies, investigating phenols-related health effects of beer, have appropriately considered the contribution of alcohol (pure or spirits) intake. For such purpose, we searched Scopus.com for any kind of experimental model (in vitro, animal, human observational or intervention) using beer and considering phenols. Overall, data reported so far support the existence of the somehow additive or synergistic effects of phenols and ethanol present in beer. However, findings are inconclusive and thus deserve further animal and human studies.

Barley-sorghum craft beer production with Saccharomyces cerevisiae, Torulaspora delbrueckii and Metschnikowia pulcherrima yeast strains

The use of different yeast strains contributes to obtain insights into beer products with diverse sensory characteristics. In this study, three yeast species of different genera were selected to evaluate their fermentation performance and sensory profile for barley-sorghum beer production. Baley-sorghum wort was produced with 12.5°P and fermented with Saccharomyces cerevisiae, Torulaspora delbrueckii and Metschnikowia pulcherrima yeast strains. Differences were observed in terms of fermentation time and ability to ferment maltose. S. cerevisiae attenuated initial maltose concentration within 72 h, while M. pulcherrima and T. delbrueckii performed fermentation within 120 and 192 h, respectively. Both yeast strains simultaneously produced 11% and 23% lower ethanol concentrations, compared to S. cerevisiae with 37.9 g/L. Wort fermented with T. delbrueckii showed residual maltose concentration of 19.7 ± 4.1 g/L, resulting in significantly enhanced beer sweetness. S. cerevisiae produced significantly increased levels of higher alcohols, and obtained the highest scores for the sensory attribute body perception. Beer produced with T. delbrueckii contained significantly lower fermentative 2,3-butanediol and 2-methyl-1-butanol volatiles; this beer also showed reduced body perception. Beer conditioned with T. delbrueckii was significantly preferred over M. pulcherrima. Besides S. cerevisiae with high fermentative power, T. delbrueckii and M. pulcherrima were found to have reduced maltose fermenting abilities and provide significantly different sensory attributes to barley-sorghum beers.

Insights into chemical and sensorial aspects to understand and manage beer aging using chemometrics

Beer chemical instability remains, at present, the main challenge in maintaining beer quality. Although not fully understood, after decades of research, significant progress has been made in identifying "aging compounds," their origin, and formation pathways. However, as the nature of aging relies on beer manufacturing aspects such as raw materials, process variables, and storage conditions, the chemical profile differs among beers. Current research points to the impact of nonoxidative reactions on beer quality. The effect of Maillard and Maillard intermediates on the final beer quality has become the focus of beer aging research, as prevention of oxidation can only sustain beer quality to some extent. On the other hand, few studies have focused on tracing a profile of whose compound is sensory relevant to specific types of beer. In this matter, the incorporation of "chemometrics," a class of multivariate statistic procedures, has helped brewing scientists achieve specific correlations between the sensory profile and chemical data. The use of chemometrics as exploratory data analysis, discrimination techniques, and multivariate calibration techniques has made the qualitatively and quantitatively translation of sensory perception of aging into manageable chemical and analytical parameters. However, despite their vast potential, these techniques are rarely employed in beer aging studies. This review discusses the chemical and sensorial bases of beer aging. It focuses on how chemometrics can be used to their full potential, with future perspectives and research to be incorporated in the field, enabling a deeper and more specific understanding of the beer aging picture.

Application of Non-Saccharomyces Yeasts Isolated from Kombucha in the Production of Alcohol-Free Beer

Alcohol-free beer (AFB) is no longer just a niche product in the beer market. For brewers, this product category offers economic benefits in the form of a growing market and often a lower tax burden and enables brewers to extend their product portfolio and promote responsible drinking. Non-Saccharomyces yeasts are known for their flavor-enhancing properties in food fermentations, and their prevailing inability to ferment maltose and maltotriose sets a natural fermentation limit and can introduce a promising approach in the production of AFB (≤0.5% v/v). Five strains isolated from kombucha, Hanseniaspora valbyensis, Hanseniaspora vineae, Torulaspora delbrueckii, Zygosaccharomyces bailii and Zygosaccharomyces kombuchaensis were compared to a commercially applied AFB strain Saccharomycodes ludwigii and a Saccharomyces cerevisiae brewer’s yeast. The strains were characterized for their sugar utilization, phenolic off-flavors, hop sensitivity and flocculation. Trial fermentations were analyzed for extract reduction, ethanol formation, pH drop and final beers were analyzed for amino acids utilization and fermentation by-products. The performance of non-Saccharomyces strains and the commercial AFB strain were comparable during fermentation and production of fermentation by-products. An experienced sensory panel could not discriminate between the non-Saccharomyces AFB and the one produced with the commercial AFB strain, therefore indicating their suitability in AFB brewing.

Phenolic Substances in Beer: Structural Diversity, Reactive Potential and Relevance for Brewing Process and Beer Quality

For the past 100 years, polyphenol research has played a central role in brewing science. The class of phenolic substances comprises simple compounds built of 1 phenolic group as well as monomeric and oligomeric flavonoid compounds. As potential anti- or prooxidants, flavor precursors, flavoring agents and as interaction partners with other beer constituents, they influence important beer quality characteristics: flavor, color, colloidal, and flavor stability. The reactive potential of polyphenols is defined by their basic chemical structure, hydroxylation and substitution patterns and degree of polymerization. The quantitative and qualitative profile of phenolic substances in beer is determined by raw material choice. During the malting and brewing process, phenolic compounds undergo changes as they are extracted or enzymatically released, are subjected to heat-induced chemical reactions or are precipitated with or adsorbed to hot and cold trub, yeast cells and stabilization agents. This review presents the current state of knowledge of the composition of phenolic compounds in beer and brewing raw materials with a special focus on their fate from raw materials throughout the malting and brewing process to the final beer. Due to high-performance analytical techniques, new insights have been gained on the structure and function of phenolic substance groups, which have hitherto received little attention. This paper presents important information and current studies on the potential of phenolics to interact with other beer constituents and thus influence quality parameters. The structural features which determine the reactive potential of phenolic substances are discussed.

Quantitating Organoleptic Volatile Phenols in Smoke-Exposed Vitis vinifera Berries

Accurate methods for quantitating volatile phenols (i.e., guaiacol, syringol, 4-ethylphenol, etc.) in smoke-exposed Vitis vinifera berries prior to fermentation are needed to predict the likelihood of perceptible smoke taint following vinification. Reported here is a complete, cross-validated analytical workflow to accurately quantitate free and glycosidically bound volatile phenols in smoke-exposed berries using liquid-liquid extraction, acid-mediated hydrolysis, and gas chromatography-tandem mass spectrometry. The reported workflow addresses critical gaps in existing methods for volatile phenols that impact quantitative accuracy, most notably the effect of injection port temperature and the variability in acid-mediated hydrolytic procedures currently used. Addressing these deficiencies will help the wine industry make accurate, informed decisions when producing wines from smoke-exposed berries.

Influencing factors of hydrogen bonding intensity in beer

The hydrogen bonding was prone to be formed by many components in beer. Different sorts of flavor substances can affect the Chemical Shift due to their different concentrations in beer. Several key factors including 4 alcohols, 2 esters, 6 ions, 9 acids, 7 polyphenols, and 2 gravity indexes (OG and RG) were determined in this research. They could be used to investigate the relationship between hydrogen bonding intensity and the flavor components in bottled larger beers through the Correlation Analysis, Principal Component Analysis and Multiple Regression Analysis. Results showed that ethanol content was the primary influencing factor, and its correlation coefficient was 0.629 for Correlation Analysis. Some factors had a positive correlation with hydrogen bonding intensity, including the content of original gravity, ethanol, isobutanol, Cl(-), K(+), pyruvic acid, lactic acid, gallic acid, vanillic acid, and Catechin in beer. A mathematic model of hydrogen bonding Chemical Shift and the content of ethanol, pyruvic acid, K(+), and gallic acid was obtained through the Principal Component Analysis and Multiple Regression Analysis , with the adjusted R(2) being 0.779 (P = 0.001). Ethanol content was proved to be the most important factor which could impact on hydrogen bonding association in beer by Principal Component Analysis. And then, a multiple non-linearity model could be obtained as follows: [Formula: see text]. The average error was 1.23 % in the validated experiment.

The effect of phenol composition on the sensory profile of smoke affected wines

Vineyards exposed to wildfire generated smoke can produce wines with elevated levels of lignin derived phenols that have acrid, metallic and smoky aromas and flavour attributes. While a large number of phenols are present in smoke affected wines, the effect of smoke vegetation source on the sensory descriptors has not been reported. Here we report on a descriptive sensory analysis of wines made from grapes exposed to different vegetation sources of smoke to examine: (1) the effect vegetation source has on wine sensory attribute ratings and; (2) associations between volatile and glycoconjugated phenol composition and sensory attributes. Sensory attribute ratings were determined by a trained sensory panel and phenol concentrations determined by gas chromatography-mass spectroscopy. Analysis of variance, principal component analysis and partial least squares regressions were used to evaluate the interrelationships between the phenol composition and sensory attributes. The results showed that vegetation source of smoke significantly affected sensory attribute intensity, especially the taste descriptors. Differences in aroma and taste from smoke exposure were not limited to an elevation in a range of detractive descriptors but also a masking of positive fruit descriptors. Sensory differences due to vegetation type were driven by phenol composition and concentration. In particular, the glycoconjugates of 4-hydroxy-3-methoxybenzaldehyde (vanillin), 1-(4-hydroxy-3-methoxyphenyl)ethanone (acetovanillone), 4-hydroxy-3,5-dimethoxybenzaldehyde (syringaldehyde) and 1-(4-hydroxy-3,5-dimethoxyphenyl)ethanone (acetosyringone) concentrations were influential in separating the vegetation sources of smoke. It is concluded that the detractive aroma attributes of smoke affected wine, especially of smoke and ash, were associated with volatile phenols while the detractive flavour descriptors were correlated with glycoconjugated phenols.

Volatile flavor compounds, total polyphenolic contents and antioxidant activities of a China gingko wine

The volatile compounds in gingko wine, a novel functional wine, were extracted by head-space solid phase micro-extraction (SPME) and analyzed by gas chromatography-mass spectrometry (GC-MS) coupled with odor activity value (OAV) and relative odor contribution (ROC) analyses. In addition, the total polyphenolic content of gingko wine was determined using the Folin-Ciocalteu reagent, and its antioxidant capacity was evaluated by 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assays. Fifty-eight compounds were tentatively identified, including 13 esters, 10 alcohols, 11 acids, 12 carbonyl compounds, 2 lactones, 2 phenols, and 8 hydrocarbons. Ethyl hexanoate, ethyl pentanoate, nonanal, ethyl butyrate and ethyl heptanoate were the major contributors to the gingko wine aroma based on the results of OAV and ROC. The total phenols content of the gingko wine was 456 mg/L gallic acid equivalents, and its antioxidant capacity was higher than those of typical Chinese liquors analyzed in this paper.

In-Tube Extraction-GC-MS as a High-Capacity Enrichment Technique for the Analysis of Alcoholic Beverages

An in-tube extraction (ITEX) method for the GC-MS analysis of volatile constituents of alcoholic beverages was developed and applied in the analysis of 46 beers from six varieties, Alt, Helles, Kölsch, Pilsener beer, Schwarzbier, and wheat beer, which are popular in Germany. The extraction performance of nine different sorbent materials was evaluated. The best overall sensitivity was achieved using Tenax TA, with method detection limits down to 0.01 μg L^-1, whereas the widest linear range was possible with PDMS, covering almost 5 orders of magnitude. This is the first application of PDMS in ITEX as a high-capacity extraction device and highlights the importance of choosing the appropriate sorbent material for the analytical task at hand. A satisfying chemometric discrimination of all analyzed beer varieties was possible, and alcohol-free beers could clearly be separated from regular beers, also.