Preparation, characterization and stability of curcumin-loaded zein-shellac composite colloidal particles

Natural shellac-based microcapsules as lipase carriers for recyclable efficient Pickering interfacial biocatalysis

Enzyme is an important class of catalyst. However, the efficiency of enzyme-catalyzed reactions is constrained by the limited contact between the enzyme and its substrate. In this study, to overcome this challenge, lipase-loaded microcapsules were prepared from natural shellac and nanoparticles using the emulsion template method. These microcapsules can perform dual roles as stabilizers and enzyme carriers to construct a water-in-oil Pickering interfacial biocatalytic system. The results showed that the hydrolytic conversion of the microcapsules could reach 90% within 20 min, which was significantly higher than that of the traditional biphasic system. The catalytic activity was influenced by the oil-to-water volume ratio and the microcapsule content. The microcapsules remained highly catalytic efficiency even after storage for three months or seven cycles of reuse. These microcapsules were prepared without the use of any cross-linkers or harsh solvents. This green and efficient catalytic system has great application prospects in the food industry.

Photo-crosslinking methacrylated-amylopectin/polyacrylamide hydrogels loading curcumin for applications as degradable, injectable, and antibacterial wound dressings

The preparation of biodegradable and antibacterial hydrogels has important clinical value. In this work, a novel strategy has been developed to prepare degradable hydrogel dressings without chemical crosslinking agent using methacrylate anhydride (MA)-modified amylopectin (APMA) and polyacrylamide (PAM). After introducing CC bonds, APMA/PAM hydrogels can be formed under light irradiation. This strategy improves the gelling ability of AP and degradation properties of the hydrogel by avoiding the addition of crosslinking agent. The degradation rate of APMA/PAM hydrogel is 74.04 ± 0.69 % within 12 weeks, while that of APMA/PAM hydrogel containing crosslinking agent is only 38.5 ± 0.1 %. The APMA/PAM hydrogel loading curcumin (Cur) (APMA/PAM-Cur) exhibits high antibacterial efficiency of 98.29 ± 0.41 % and 97.18 ± 0.81 % against S. aureus and E. coli, respectively, with light irradiation. Animal experiments show that the APMA/PAM-Cur hydrogel reduces the infiltration of inflammatory factors, increases the density of collagen, and makes the newly formed granulation tissue thicker and tighter. This study not only proves the promising potential of the APMA/PAM-Cur hydrogel as degradable and antibacterial wound dressing for clinical treatment, but also provides a new strategy for developing low-cost, degradable, and antibacterial wound dressings and reducing antibiotic abuse and environmental pollution caused by medical waste.

Development of quercetin-loaded electrospun nanofibers through shellac coating on gelatin: Characterization, colon-targeted delivery, and anticancer activity

Quercetin possesses multiple biological activities. To achieve efficient colon-specific release of quercetin, new composite nanofibers were developed by coating pH-responsive shellac on hydrophilic gelatin through coaxial electrospinning. These composite nanofibers contained bead-like structures. The encapsulation efficiency (87.6-98.5 %) and loading capacity (1.4-4.1 %) varied with increasing the initial quercetin addition amount (2.5-7.5 %). FTIR, XRD, and TGA results showed that the quercetin was successfully encapsulated in composite nanofibers in an amorphous state, with interactions occurring among quercetin, gelatin, and shellac. Composite nanofibers had pH-responsive surface wettability due to the shellac coating. In vitro digestion experiments showed that these composite nanofibers were highly stable in the upper gastrointestinal tract, with quercetin release ranging from 4.75 % to 12.54 %. In vivo organ distribution and pharmacokinetic studies demonstrated that quercetin could be sustainably released in the colon after oral administration of composite nanofibers. Besides, the enhanced anticancer activity of composite nanofibers was confirmed against HCT-116 cells by analyzing their effect on cell viability, cell cycle, and apoptosis. Overall, these novel composite nanofibers could deliver efficiently quercetin to the colon and achieve its sustained release, thus potential to regulate colon health. This system is also helpful in delivering other bioactives to the colon and exerting their functional effects.

Investigation of delivery mechanism of curcumin loaded in a core of zein with a double-layer shell of chitosan and alginate

The pursuit of efficient drug delivery systems has led to innovative approaches such as matrix and core-shell structures. This study explores these systems with a focus on enhancing the delivery and stability of curcumin, a bioactive compound with therapeutic potential. Matrix systems using zein protein were fabricated through coaxial airflow extrusion with a vibration generator, while core-shell systems were produced using concentric nozzles. Double-layer reservoir systems were also formed by coating chitosan-shelled structures with an alginate solution. Encapsulation of curcumin within each system was confirmed through FTIR and optical microscope analysis, followed by efficiency evaluation, which was measured approximately 86.5 ± 0.7 % for the matrix systems and 90 ± 0.8 % for the core-shell systems. Moreover, the particle sizes of matrix systems were measured in the range of 2000-2100 mμ and the particle sizes of single-layer and double-layer reservoir systems were in the ranges of 1600-1700 mμ and 1500-1700 mμ, respectively. The study investigated the stability of curcumin in these systems under various environmental conditions, including exposure to light, heat, pH variations, ions, and storage. Results demonstrated that the presence of multiple layers significantly enhanced the drug's stability. Afterwards, swelling and drug release profiles were assessed in simulated gastric, intestinal, and colon fluids. The swelling of the matrix, single-layer and double-layer reservoir systems after 29 h were 127.4 %, 146.9 % and 144 %, respectively. The matrix system showed 68.7 % drug release after 29 h, whereas single-layer chitosan-shelled and double-layer chitosan/alginate-shelled reservoir systems released 51.8 % and 45.6 % of the drug, respectively. The release mechanism was explored using zero-order, Korsmeyer-Peppas, and Kopcha kinetic models. Comparative analysis of the experimental results and model fittings indicated a deviation from Fickian diffusion, with erosion becoming more pronounced with each additional layer. In conclusion, the system with a zein core and double-layer chitosan/alginate shell displayed effective drug release regulation and enhanced stability of curcumin, making it a promising candidate for efficient drug delivery.

Gelatin-nanocellulose stabilized emulsion-filled hydrogel beads loaded with curcumin: Preparation, encapsulation and release behavior

In this study, the curcumin was firstly encapsulated in gelatin (GLT) and/or cellulose nanocrystals (CNC) stabilized emulsions, then further mixed with sodium alginate (SA) to form emulsion-filled hydrogel beads loaded with curcumin (Cur). The Cur-loaded emulsions showed a droplet size of 20.3-24.4 μm with a uniform distribution. Introducing CNC and/or SA increased the viscosity of emulsions accompanied by viscoelastic transition, while the modulus was reduced due to destruction of GLT gel. Cur was doubly immobilized in the hydrogel beads with >90 % of encapsulation efficiency. The results of simulated gastrointestinal tract experiments revealed that the beads possessed a good pH sensitivity and controlled release behavior to prolong the retention of Cur in the gastrointestinal tract. After 6 h of UV irradiation, the Cur-loaded emulsion-filled hydrogel beads showed a higher antioxidant activity than that of pure Cur, effectively delaying the photodegradation of Cur. In addition, the beads had better stability in aqueous and acidic environments, which was favorable for prolonging the release of Cur. These results suggest that the emulsion-filled hydrogel beads have great potential for the delivery of lipophilic bioactive molecules.

Shellac-based delivery systems for food bioactive compounds

Shellac is a natural resin featuring some attractive properties such as amphiphilicity, pH responsiveness, biocompatibility, and biodegradability. There has been increasing interest in employing shellac for controlled delivery of food bioactive compounds. This review outlines the recent advances in different types of shellac-based delivery systems, including nanoparticles, zein-shellac particles, hydrogels, nanofibers, and nanomicelles. The preparation method, formation mechanism, structure, and delivery performance are investigated. These systems could improve the stability and shelf-life of bioactive compounds, allow for targeted release at the small intestine or colon site, and increase bioavailability. The deficiencies and challenges of each of the systems are also discussed. The promising results in this review could guide future trends in more efficient shellac-based delivery platforms for functional food applications.

Preparation, structural characterization, and functional attributes of zein-lysozyme-κ-carrageenan ternary nanocomposites for curcumin encapsulation

The low water solubility and inadequate bioavailability of curcumin significantly hinder its broad biological applications in the realms of food and medicine. There is limited information currently available regarding the particle characteristics and functional capabilities of zein-lysozyme-based nanomaterials. Thereby, the primary goal of the current work is to effectively develop innovative zein-lysozyme-κ-carrageenan complex nanocomposites (ZLKC) as a reliable carrier for curcumin encapsulation. As a result, ZLKC nanoparticles showed a smooth spherical nanostructure with improved encapsulation efficiency. Fourier-transform infrared, fluorescence spectroscopy, dissociation assay, and circular dichroism analysis revealed that hydrophobic and electrostatic interactions and hydrogen bonding were pivotal in the construction and durability of these composites. X-ray diffraction examination affirmed the lack of crystallinity in curcumin encapsulated within nanoparticles. The incorporation of κ-carrageenan significantly improved the physicochemical stability of ZLKC nanoparticles in diverse environmental settings. Additionally, ZLKC nanocomposites demonstrated enhanced antioxidant and antimicrobial properties, as well as sustained release characteristics. Therefore, these findings demonstrate the potential application of ZLKC nanocomposites as delivery materials for encapsulating bioactive substances.

Shellac and locust bean gum coacervated curcumin, epigallocatechin gallate nanoparticle ameliorates diabetic nephropathy in a streptozotocin-induced mouse model

Curcumin and epigallocatechin gallate have the disadvantage of low aqueous solubility and first-pass metabolism, resulting in limited bioavailability. This work aimed to enhance oral bioavailability by forming gastric pH-stable shellac nanoparticles containing curcumin and epigallocatechin gallate using locust bean gum by anti-solvent precipitation (CESL-NP). The nanoparticles were characterized by their particle size, morphology, zeta potential, gastric pH stability, release profile, drug loading, and entrapment efficiency. The findings showed that a network of hydrolyzed shellac, locust bean gum, curcumin, and epigallocatechin gallate successfully entrapped individual particles inside a complex system. The morphological investigation of the CESL-NP formulation using FESEM, TEM, and AFM revealed the presence of spherical particles. FTIR, DSC, and XRD analysis revealed that curcumin and epigallocatechin gallate were amorphous due to their bond interactions with the matrix. Streptozotocin-treated mice, upon treatment with CESL-NP, showed kidney and pancreatic improvements with normalized kidney hypertrophy index and histopathology, maintained biochemical parameters, increased beta cell count, and a 38.68-fold higher blood glucose level inhibition were observed when compared to free-(CUR + EGCG). This research affirms that the shellac-locust bean gum complex shows potential for the sustained oral delivery of curcumin and epigallocatechin gallate, specifically for treating diabetic nephropathy.

Structures and interactions forming stable shellac-casein nanocomplexes with a pH-cycle

Casein forms diverse structures with functionalities tunable by complexation with surfactants, and shellac is an emerging surfactant. In the present work, molecular and mesoscopic structures of shellac and micellar casein and the underlying interactions after treatment with a pH-cycle were investigated. Dispersions with 0.5 % w/v shellac and various shellac:casein mass ratios were prepared at pH 12.0 to dissolve shellac and dissociate casein micelles, followed by neutralization to pH 7.0 to form complexes. Both covalent and non-covalent (hydrogen bonding, electrostatic, and hydrophobic) interactions contributed to the complex formation. The formed complexes had an average diameter of ~80 nm. The complexation of shellac and casein prevented the precipitation of protonated shellac during neutralization, and dispersions with casein:shellac mass ratios of 2:1 and above were absent of precipitates at pH 7.0. The formed nanocomplexes may have applications for preparing novel colloidal systems and loading lipophilic bioactive compounds.

Fabrication and characterization of shellac nanofibers with colon-targeted delivery of quercetin and its anticancer activity

In this study, the feasibility of shellac nanofibers as carrier system for colonic delivery of quercetin was evaluated. Firstly, the nanofibers without and with different amounts (2.5 %, 5.0 %, and 7.5 %) of quercetin were fabricated using pure shellac as a carrier by electrospinning. The morphology of nanofibers was bead-shape confirmed by SEM. FTIR, XRD, and DSC analysis showed that quercetin was encapsulated into shellac nanofibers, forming an amorphous complex. The molecular docking simulation indicated quercetin bound well to shellac through hydrogen bonding and van der Waals forces. These nanofibers had higher thermal stability than pure quercetin, and their surface wettability exhibited a pH-responsive behavior. The loading capacity of quercetin varied from 2.25 % to 6.84 % with the increased amount of quercetin, and it affected the stability of nanofibers in food simulants by measuring the release profiles of quercetin. The shellac nanofibers had high gastrointestinal stability, with a minimum quercetin release of 16.87 % in simulated digestive fluids, while the remaining quercetin was delivered to the colon and was released gradually. Moreover, the nanofibers exerted enhanced anticancer activity against HCT-116 cells by arresting cell cycle in G0/G1 phase and inducing cell apoptosis. Overall, shellac nanofibers are promising materials for colon-targeted delivery of active compounds.

Development of sorghum arabinoxylan-soy protein isolate composite nanoparticles for delivery of curcumin: Effect of polysaccharide content on stability and in vitro digestibility

The purpose of this study was to fabricate composite nanoparticles using soy protein isolate (SPI) and sorghum bran arabinoxylan (AX) for the delivery of curcumin (Cur). The influences of AX concentrations on the physicochemical characteristic, stability and bioaccessibility of curcumin were investigated. The findings showed that the encapsulation efficiency of curcumin obviously increased upon incorporating AX in comparison to SPI-Cur particles. Hydrogen bonds and hydrophobic interactions were the primary driving forces for the formation of SPI-Cur-AX nanoparticles (SCA). SCA nanoparticles with 1.00 % AX exhibited a uniform size with orderly distribution, suggesting its remarkable physical stability due to the strengthened electrostatic repulsion. However, excessive AX led to aggregation of particles, a noticeable increase in size, and subsequently, a reduction in stability. Due to the heightened free radical scavenging capacity of sorghum AX, SCA nanoparticles exhibited superior antioxidant capabilities. Compared to free curcumin, encapsulation within composite particles significantly enhanced the retention rate and bioaccessibility of curcumin. This improvement was attributed to the potent emulsification ability of AX, which coordinated with bile salt to promote the transfer of curcumin into micelles. The research provides an effective strategy for developing food-grade delivery carriers aimed at enhancing dispersibility, stability and bioaccessibility of the fat-soluble bioactives.

Electrospun zein nanofibers loaded with curcumin as a wound dressing: enhancing properties with PSS and PDADMAC layers

Development of wound dressings with enhanced therapeutic properties is of great interest in the modern healthcare. In this study, a zein-based nanofibrous wound dressing containing curcumin as a therapeutic agent was fabricated through electrospinning technique. In order to achieve desirable properties, such as antibacterial characteristics, reduced contact angle, and enhanced mechanical properties, the layer-by-layer technique was used for coating the surfaces of drug-loaded nanofibers by sequentially incorporating poly (sodium 4-styrene sulfonate) as a polyanion and poly (diallyldimethylammonium chloride) (PDADMAC) as a polycation. Various analyses, including scanning electron microscopy, Fourier transform infrared spectroscopy, drug release assessment., and mechanical tests were employed to assess the characteristics of the prepared wound dressings. Based on the results, coating with polyelectrolytes enhanced the Young's modulus and tensile strength of the electrospun mat from 1.34 MPa and 4.21 MPa to 1.88 MPa and 8.83 MPa, respectively. The coating also improved the controlled release of curcumin and antioxidant activity, while the outer layer, PDADMAC, exhibited antibacterial properties. The cell viability tests proved the appropriate biocompatibility of the prepared wound dressings. Moreover, our findings show that incorporation of the coating layers enhances cell migration and provides a favorable surface for cell attachment. According to the findings of this study, the fabricated nanofibrous wound dressing can be considered a promising and effective therapeutic intervention for wound management, facilitating the healing process.

Structured soft particulate matters for delivery of bioactive compounds in foods and functioning in the colon

The present review discusses challenges, perspectives, and current needs of delivering bioactive compounds (BCs) using soft particulate matters (SPMs) for gut health. SPMs can entrap BCs for incorporation in foods, preserve their bioactivities during processing, storage, and gastrointestinal digestion, and deliver BCs to functioning sites in the colon. To enable these functions, physical, chemical, and biological properties of BCs are integrated in designing various types of SPMs to overcome environmental factors reducing the bioavailability and bioactivity of BCs. The design principles are applied using food grade molecules with the desired properties to produce SPMs by additionally considering the cost, sustainability, and scalability of manufacturing processes. Lastly, to make delivery systems practical, impacts of SPMs on food quality are to be evaluated case by case, and health benefits of functional foods incorporated with delivery systems are to be confirmed and must outweigh the cost of preparing SPMs.

Zein/hyaluronic acid nanoparticle stabilized Pickering emulsion for astaxanthin encapsulation

Pickering emulsions have attracted considerable attention owing to the stability and functionality. In this study, zein/hyaluronic acid (ZH) nanoparticles were prepared and applied for stabilizing astaxanthin encapsulated Pickering emulsions. By non-covalent interaction between Zein and hyaluronic acid (HA), the conformation of zein changed and therefore improved the wettability of ZH nanoparticles. Unlike the spherical zein nanoparticles, ZH nanoparticles possessed a cross-linked structure with rough surface. Confocal laser scanning microscopy indicated that the nanoparticles accumulated at the oil-water interface. The Pickering emulsion stabilized by ZH nanoparticles exhibited high viscoelasticity and a solid-like behavior, as well as excellent stability during the storage. In vitro digestion results revealed that the presence of HA coating prevented the emulsion from pepsin hydrolysis and achieved efficient delivery of astaxanthin. This work confirmed that Pickering emulsion stabilized by ZH nanoparticles could be used as an effective deliver system for bioactive substances.

Green Synthesis of Zein-Based Nanoparticles Encapsulating Lupulone: Antibacterial and Antiphotoaging Agents

Prolonged skin exposure to UV radiation may result in sunburn, with possible inflammatory and oxidative stress to the skin, skin photoaging, photocarcinogenesis, even DNA damage, and apoptosis if sunscreen protection is not used. Due to the advantages that they offer, high encapsulation capability, increased stability of encapsulated bioactive agents, and release control, nanoparticulate materials have been used in sunscreens despite the hazard that they present: their capacity to penetrate the skin causing toxic side effects (especially the chemical sunscreens). The present study reports the preparation of nanoparticulate composites containing only GRAS substances and using an eco-friendly, inexpensive procedure. The ingredients used have properties that are beneficial to the skin. Zein (Z), a prolamin-rich protein from corn, is biodegradable and biocompatible, is a moisture attractor, and shows effective absorption by cells. Lupulone (L), extracted from hops, is an antibacterial and antioxidant agent that has a stimulating effect on the collagen production in the body due to its content of phytohormones. Gum arabic (GA) is a natural glycoprotein used in beverages and cosmetics as an emulsifier/stabilizer. Composite matrices containing Z/GA/L were prepared using a simple method (antisolvent), which replaces the flammable solvent ethanol with aqueous propylene glycol. The nanocomposites were characterized by FTIR, composition, encapsulation efficiency, and loading capacity for L, size, zeta potential, and morphology (SEM). Their biological activity was investigated as well. The zein-based nanoparticles showed antioxidant and antimicrobial effects (even some synergistic, unexpected behavior) and modulatory activity on the matrix metalloproteinase MMP-1. Due to their properties, the nanoparticles discussed herein show potential for use in formulations for the skin, especially for mature skin, replacing chemical substances with potential side effects used typically in topical delivery systems.

Hydrogel Bioinks of Alginate and Curcumin-Loaded Cellulose Ester-Based Particles for the Biofabrication of Drug-Releasing Living Tissue Analogs

3D bioprinting is a versatile technique that allows the fabrication of living tissue analogs through the layer-by-layer deposition of cell-laden biomaterials, viz. bioinks. In this work, composite alginate hydrogel-based bioinks reinforced with curcumin-loaded particles of cellulose esters (CEpCUR) and laden with human keratinocytes (HaCaT) are developed. The addition of the CEpCUR particles, with sizes of 740 ± 147 nm, improves the rheological properties of the inks, increasing their shear stress and viscosity, while preserving the recovery rate and the mechanical and viscoelastic properties of the resulting fully cross-linked hydrogels. Moreover, the presence of these particles reduces the degradation rate of the hydrogels from 26.3 ± 0.8% (ALG) to 18.7 ± 1.3% (ALG:CEpCUR_10%) after 3 days in the culture medium. The 3D structures printed with the ALG:CEpCUR inks reveal increased printing definition and the ability to release curcumin (with nearly 70% of cumulative release after 24 h in PBS). After being laden with HaCaT cells (1.2 × 106 cells mL-1), the ALG:CEpCUR bioinks can be successfully 3D bioprinted, and the obtained living constructs show good dimensional stability and high cell viabilities at 7 days post-bioprinting (nearly 90%), confirming their great potential for application in fields like wound healing.

Preservation of Fresh-Cut 'Maradol' Papaya with Polymeric Nanocapsules of Lemon Essential Oil or Curcumin

Papaya is one of the most consumed fruits in the world; however, tissue damage caused by cuts quickly leads to its decay. Therefore, this study aimed to prepare and characterize lemon oil and curcumin nanocapsules to evaluate their capacity for preserving fresh-cut papaya. Lemon essential oil and curcumin nanocapsules were prepared using ethyl cellulose (EC) and poly-(ε-caprolactone) (PCL) by the emulsification-diffusion method coupled with ultrasound. The particles had sizes smaller than 120 nm, with polydispersity indices below 0.25 and zeta potentials exceeding -12 mV, as confirmed by scanning electron microscopy. The nanoparticles remained stable for 27 days, with sedimentation being the instability mechanism observed. These nanoparticles were employed to coat fresh-cut papaya, which was stored for 17 days. The results demonstrated their remarkable efficacy in reducing the respiration rate. Furthermore, nanocapsules maintained the pH and acidity levels of the papayas for an extended period. The lemon oil/EC nanocapsule treatment retained the color better. Additionally, all systems exhibited the ability to minimize texture loss associated with reduced pectin methylesterase activity. Finally, the nanocapsules showed a notable reduction in polyphenol oxidase activity correlating with preserving total phenolic compounds in the fruit. Therefore, the lemon oil and curcumin nanoparticles formed using EC and PCL demonstrated their effectiveness in preserving fresh-cut 'Maradol' papaya.

Construction of a Ternary Composite Colloidal Structure of Zein/Soy Protein Isolate/Sodium Carboxymethyl Cellulose to Deliver Curcumin and Improve Its Bioavailability

This work presents the fabrication of ternary nanoparticles (Z/S/C NPs) comprising zein (Z), soy protein isolate (SPI) and carboxymethylcellulose sodium (CMC-Na) through a pH-driven method. The results showed that the smallest particle size (71.41 nm) and the most stable zeta potential, measuring -49.97 mV, were achieved with the following ratio of ternary nanoparticles Z/SPI/CMC-Na (2:3:3). The surface morphology of the nanoparticles was further analyzed using transmission electron microscopy, and the synthesized nanoparticles were utilized to encapsulate curcumin (Cur), a hydrophobic, bioactive compound. The nanoparticles were characterized using a particle size analyzer, infrared spectroscopy, and X-ray diffraction (XRD) techniques. The results revealed that the formation of nanoparticles and the encapsulation of Cur were driven by electrostatic, hydrogen-bonding and hydrophobic interactions. The drug loading efficiency (EE%) of Z/S/C-cur nanoparticles reached 90.90%. The Z/S/C ternary nanoparticles demonstrated enhanced storage stability, photostability and simulated the gastrointestinal digestion of Cur. The release of Cur and variations in the particle size of nanoparticles were investigated across different stages of digestion. The biocompatibility of the Z/S/C ternary nanoparticles was assessed by conducting cell viability assays on HepG2 and L-O2 cells, which showed no signs of cytotoxicity. These results suggested that the ternary composite nanoparticles have potential in delivering nutritional foods and health-promoting bioactive substances.

One-Pot Self-Assembly of Core-Shell Nanoparticles within Fibers by Coaxial Electrospinning for Intestine-Targeted Delivery of Curcumin

Nanotechniques for curcumin (Cur) encapsulation provided a potential capability to avoid limitations and improve biological activities in food and pharmaceutics. Different from multi-step encapsulation systems, in this study, zein-curcumin (Z-Cur) core-shell nanoparticles could be self-assembled within Eudragit S100 (ES100) fibers through one-pot coaxial electrospinning with Cur at an encapsulation efficiency (EE) of 96% for ES100-zein-Cur (ES100-Z-Cur) and EE of 67% for self-assembled Z-Cur. The resulting structure realized the double protection of Cur by ES100 and zein, which provided both pH responsiveness and sustained release performances. The self-assembled Z-Cur nanoparticles released from fibermats were spherical (diameter 328 nm) and had a relatively uniform distribution (polydispersity index 0.62). The spherical structures of Z-Cur nanoparticles and Z-Cur nanoparticles loaded in ES100 fibermats could be observed by transmission electron microscopy (TEM). Fourier transform infrared spectra (FTIR) and X-ray diffractometer (XRD) revealed that hydrophobic interactions occurred between the encapsulated Cur and zein, while Cur was amorphous (rather than in crystalline form). Loading in the fibermat could significantly enhance the photothermal stability of Cur. This novel one-pot system much more easily and efficiently combined nanoparticles and fibers together, offering inherent advantages such as step economy, operational simplicity, and synthetic efficiency. These core-shell biopolymer fibermats which incorporate Cur can be applied in pharmaceutical products toward the goals of sustainable and controllable intestine-targeted drug delivery.

Development and Characterization of an Edible Zein/Shellac Composite Film Loaded with Curcumin

The development of functional edible films is promising for the food industry, and improving the water barrier of edible films has been a research challenge in recent years. In this study, curcumin (Cur) was added to zein (Z) and shellac (S) to prepare an edible composite film with a strong water barrier and antioxidant properties. The addition of curcumin significantly reduced the water vapor permeability (WVP), water solubility (WS), and elongation at break (EB), and it clearly improved the tensile strength (TS), water contact angle (WCA), and optical properties of the composite film. The ZS-Cur films were characterized by SEM, FT-IR, XRD, DSC, and TGA; the results indicated that hydrogen bonds were formed among the curcumin, zein, and shellac, which changed the microstructure and improved the thermal stability of the film. A test of curcumin release behavior showed controlled release of curcumin from the film matrix. ZS-Cur films displayed remarkable pH responsiveness, strong antioxidant properties, and inhibitory effects on E. coli. Therefore, the insoluble active food packaging prepared in this study provides a new strategy for the development of functional edible films and also provides a possibility for the application of edible films to extend the shelf life of fresh food.

Changes in Gelation Properties of Silver Carp Myosin Treated by Combination of High Intensity Ultrasound and NaCl

The molecular behavior of myosin in a low-salt environment limited the production of surimi-based products. This study aimed to investigate the effect of the combination of high intensity ultrasound (HIU) and NaCl (0.1, 0.3, 0.5 mol/L) on the physicochemical indexes of myosin. The changes were evaluated by solubility, ultraviolet (UV) spectroscopy, dynamic rheological properties, water holding capacity (WHC), microstructures, etc. For control samples, the gelation properties of myosin strengthened upon NaCl increasing. Combination of HIU and NaCl significantly improved the solubility of myosin, which was due to the conformational changes and the exposure of reactive groups. Meanwhile, the particle size of myosin obviously decreased when observed by atomic force microscope, which in turn promoted the stability of myosin. Furthermore, the improvement in solution behaviors of myosin treated by combination of HIU and NaCl contributed to the gelation properties as well as the formation of compact microstructures, which obtained high WHC and low cooking loss of myosin gels. In conclusion, combination of HIU and NaCl induced the unfolding of myosin with the exposure of reactive groups, consequently facilitating the formation of denser microstructures. Moreover, the biggest degree of improvement in gelation properties was observed at 0.1 mol/L NaCl combined with HIU.

Properties of curcumin-loaded zein-tea saponin nanoparticles prepared by antisolvent co-precipitation and precipitation

The properties of nutraceutical-loaded biopolymer nanoparticles fabricated by antisolvent co-precipitation (ASCP) and precipitation (ASP) were compared. Curcumin-loaded zein-tea saponin nanoparticles were fabricated using both methods and then their structural and physicochemical properties were characterized. The diameter of the nanoparticles prepared by ASCP were smaller (120-130 nm) than those prepared by ASP (140-160 nm). The encapsulation efficiency of the ASCP-nanoparticles (80.0%) was higher than the ASP-ones (71.0%) at a zein-to-curcumin mass ratio of 3:1, which was also higher than previous studies. The storage and light stability of curcumin was higher in zein-saponin nanoparticles than in zein nanoparticles. All nanoparticles had good water dispersibility after freeze-drying and rehydration. This study shows that nanoparticles produced by antisolvent co-precipitation have superior properties to those produced by antisolvent precipitation. The co-precipitation method leads to a higher encapsulation efficiency, smaller particle size, and greater storage stability, which may be advantageous for some applications.

Encapsulation of Bioactive Compounds for Food and Agricultural Applications

This review presents an updated scenario of findings and evolutions of encapsulation of bioactive compounds for food and agricultural applications. Many polymers have been reported as encapsulated agents, such as sodium alginate, gum Arabic, chitosan, cellulose and carboxymethylcellulose, pectin, Shellac, xanthan gum, zein, pullulan, maltodextrin, whey protein, galactomannan, modified starch, polycaprolactone, and sodium caseinate. The main encapsulation methods investigated in the study include both physical and chemical ones, such as freeze-drying, spray-drying, extrusion, coacervation, complexation, and supercritical anti-solvent drying. Consequently, in the food area, bioactive peptides, vitamins, essential oils, caffeine, plant extracts, fatty acids, flavonoids, carotenoids, and terpenes are the main compounds encapsulated. In the agricultural area, essential oils, lipids, phytotoxins, medicines, vaccines, hemoglobin, and microbial metabolites are the main compounds encapsulated. Most scientific investigations have one or more objectives, such as to improve the stability of formulated systems, increase the release time, retain and protect active properties, reduce lipid oxidation, maintain organoleptic properties, and present bioactivities even in extreme thermal, radiation, and pH conditions. Considering the increasing worldwide interest for biomolecules in modern and sustainable agriculture, encapsulation can be efficient for the formulation of biofungicides, biopesticides, bioherbicides, and biofertilizers. With this review, it is inferred that the current scenario indicates evolutions in the production methods by increasing the scales and the techno-economic feasibilities. The Technology Readiness Level (TRL) for most of the encapsulation methods is going beyond TRL 6, in which the knowledge gathered allows for having a functional prototype or a representative model of the encapsulation technologies presented in this review.

Delivery of curcumin by shellac encapsulation: Stability, bioaccessibility, freeze-dried redispersibility, and solubilization

•

Shellac can nano-encapsulate curcumin by pH cycle.

•

The starting point of the design is economy, simplicity, energy saving and safety.

•

High loading capacity of curcumin is the unique advantage of shellac nanoparticles.

•

The nanoparticles had good physicochemical stability and bioaccessibility.

•

The redispersibility is proportional to the mass ratio of shellac-to-curcumin.

Curcumin is an active ingredient with multiple functions, however, its application is limited by its low stability, bioaccessibility, freeze-dried redispersibility, and solubilization. The work aims to improve the application of curcumin (Cur) by encapsulation. Shellac was the wall material inspired by its pH-dependent deprotonation and amphiphilic nature to form nanoparticles. The curcumin/shellac nanoparticles (S/Cur) exhibited a bright spot of high loading capacity (the maximum of higher than 70 %), while still having high encapsulation efficiency (the minimum of higher than 85 %). Transmission electron microscopy showed that S/Cur was a spherical structure. It exhibited good physical stability, including pH (4.0–8.0), ionic strength (NaCl, < 900 mM), thermo stability (80 ℃, 180 min), and storage stability (light and dark, 4 and 25 ℃, 20 days). Meanwhile, the chemical stability was increased by encapsulation. Furthermore, the bioaccessibility of Cur was improved to 75.95 %, which is attributed to the pH response of shellac. Additionally, S/Cur had freeze-dried redispersibility and solubilization, which is proportional to the mass ratio of shellac-to-Cur. The mechanism of S/Cur formation involved hydrophobic interaction and hydrogen bonds, and the nanoconfined Cur was amorphous.

Zein-based nano-delivery systems for encapsulation and protection of hydrophobic bioactives: A review

Zein is a kind of excellent carrier materials to construct nano-sized delivery systems for hydrophobic bioactives, owing to its unique interfacial behavior, such as self-assembly and packing into nanoparticles. In this article, the chemical basis and preparation methods of zein nanoparticles are firstly reviewed, including chemical crosslinking, emulsification/solvent evaporation, antisolvent, pH-driven method, etc., as well as the pros and cons of different preparation methods. Various strategies to improve their physicochemical properties are then summarized. Lastly, the encapsulation and protection effects of zein-based nano-sized delivery systems (e.g., nanoparticles, nanofibers, nanomicelles and nanogels) are discussed, using curcumin as a model bioactive ingredient. This review will provide guidance for the in-depth development of hydrophobic bioactives formulations and improve the application value of zein in the food industry.

Preparation and Characterization of Rutin–Loaded Zein–Carboxymethyl Starch Nanoparticles

In this work, rutin (RT)–loaded zein–carboxymethyl starch (CMS) nanoparticles were successfully prepared by the antisolvent precipitation method. The effect of CMS on composite nanoparticles at different concentrations was studied. When the ratio of zein–RT–CMS was 10:1:30, the encapsulation efficiency (EE) was the highest, reaching 73.5%. At this ratio, the size of the composite nanoparticles was 196.47 nm, and the PDI was 0.13, showing excellent dispersibility. The results of fluorescence spectroscopy, FTIR, XRD, and CD showed that electrostatic interaction, hydrogen bonding, and hydrophobic interaction were the main driving forces for the formation of nanoparticles. It can be seen from the FE–SEM images that the zein–RT–CMS nanoparticles were spherical. With the increase in the CMS concentration, the particles gradually embedded in the cross–linked network of CMS (10:1:50). After RT was loaded on zein–CMS nanoparticles, the thermal stability and pH stability of RT were improved. The results showed that zein–CMS was an excellent encapsulation material for bioactive substances.

Overcoming Beta-Lactamase-Based Antimicrobial Resistance by Nanocarrier-Loaded Clavulanic Acid and Antibiotic Cotreatments

Antimicrobial resistance (AMR) is one of the major threats to modern healthcare. Many types of bacteria have developed resistance to multiple antibiotic treatments, while additional antibiotics have not been recently brought to market. One approach to counter AMR based on the beta-lactamase enzyme has been to use cotreatments of an antibiotic and an inhibitor, to enhance the antibiotic action. Here, we aimed to enhance this technique by developing nanocarriers of two cationic beta-lactam class antibiotics, amoxicillin, and ticarcillin, combined with a beta-lactamase inhibitor, clavulanic acid, which can potentially overcome this type of AMR. We demonstrate for the first time that beta-lactamase inhibitor-loaded nanocarriers in cotreatments with either free or nanocarrier-loaded beta-lactam antibiotics can enhance their effectiveness further than when used alone. We use surface-functionalized shellac-/Poloxamer 407-stabilized antibiotic nanocarriers on Pseudomonas aeruginosa, which is susceptible to ticarcillin but is resistant to amoxicillin. We show an amplification of the antibiotic effect of amoxicillin and ticarcillin loaded in shellac nanoparticles, both alone and as a cotreatment with free or nanocarrier-loaded clavulanic acid. We also report a significant increase in the antimicrobial effects of clavulanic acid loaded in such nanocarriers as a cotreatment. We explain the increased antimicrobial activity of the cationically functionalized antibiotic-loaded nanoparticles with electrostatic attraction to the bacterial cell wall, which delivers higher local antibiotic and inhibitor concentrations. The effect is due to the accumulation of the clavulanic acid-loaded nanocarriers on the bacterial cell walls that allows a higher proportion of the inhibitor to engage with the produced intracellular beta-lactamases. These nanocarriers were also found to have a very low cytotoxic effect against human keratinocytes, which shows great potential for overcoming enzyme-based AMR.

Synthesis and characterization of lotus seed protein-based curcumin microcapsules with enhanced solubility, stability, and sustained release

BACKGROUND

Lotus seed protein (LSP) was extracted from lotus seed and used to encapsulate curcumin with or without complexing with pectin. The physicochemical properties of LSP-based microcapsules, including solubility, stability, and in vitro sustained release, were determined. The mechanism of interaction between curcumin, LSP, and pectin was revealed.

RESULTS

The encapsulation efficiency of curcumin was found to depend on LSP concentration and was highest (86.32%, w/w) at 50 mg mL^-1 . The curcumin in curcumin-LSP and curcumin-LSP-pectin powder particles achieved a solubility of 75.15% and 81.39%, respectively, which was a remarkable enhancement. The microencapsulation with LSP and LSP-pectin matrix showed a significant improvement in the antioxidant activity, photostability, thermostability, and storage stability of free curcumin. The microencapsulated curcumin showed sustained control release at the gastric stage and burst-type release in the subsequent intestinal stage, presenting cumulative release rates of 64.3% and 72.4% from curcumin-LSP and curcumin-LSP-pectin particles after gastrointestinal digestion. The LSP-pectin complex produced microcapsules with higher solubility, smaller particle size, enhanced physicochemical stability, and increased bioaccessibility. Fourier transform infrared, circular dichroism spectra, and differential scanning calorimetry data indicated that the encapsulated curcumin interacted with LSP and pectin mainly through hydrogen bonding, hydrophobic, and electrostatic interactions.

CONCLUSION

This work shows that LSP can be an alternative encapsulant for the delivery of hydrophobic nutraceuticals with enhanced solubility, stability, and sustained release. The results may contribute to the design of novel food-grade delivery systems based on LSP vehicles, thereby broadening the applications of LSP in the fields of functional food. © 2021 Society of Chemical Industry.

A review of factors affecting the stability of zein-based nanoparticles loaded with bioactive compounds: from construction to application

Zein-based nanoparticles loaded with bioactive compounds have positive prospects in the food industry, but an important limiting factor for development is colloidal instability. Currently, extensive researches are focused on solving the instability of zein nanoparticles, but since the beginning of the studies, there has not been a summary of the factors affecting the stability of zein-based nanoparticles. In the present work, the factors were reviewed comprehensively from the perspective of carrier construction and application evaluation. The former mainly includes type, quantity, and characteristics of biopolymer, the mass ratio of biopolymer/bioactive compound to zein, blending sequence of biopolymer, and location of encapsulated bioactive compounds. The latter mainly includes pH, heating, ionic strength, storage, freeze-drying, and gastrointestinal digestion. The former is the prerequisite for the success of the latter. The challenge is that stability research is limited to the laboratory level, and it is difficult to ensure that the stability results are suitable for commercial food matrices due to their complexity. At the laboratory level, the future trends are the influence of external energy and the cross-complexity and uniformity of stability research. The review is expected to provide systematic understanding and guidance for the development of zein-based nanoparticles stability.

Progress in Colloid Delivery Systems for Protection and Delivery of Phenolic Bioactive Compounds: Two Study Cases-Hydroxytyrosol and Curcumin

Insufficient intake of beneficial food components into the human body is a major issue for many people. Among the strategies proposed to overcome this complication, colloid systems have been proven to offer successful solutions in many cases. The scientific community agrees that the production of colloid delivery systems is a good way to adequately protect and deliver nutritional components. In this review, we present the recent advances on bioactive phenolic compounds delivery mediated by colloid systems. As we are aware that this field is constantly evolving, we have focused our attention on the progress made in recent years in this specific field. To achieve this goal, structural and dynamic aspects of different colloid delivery systems, and the various interactions with two bioactive constituents, are presented and discussed. The choice of the appropriate delivery system for a given molecule depends on whether the drug is incorporated in an aqueous or hydrophobic environment. With this in mind, the aim of this evaluation was focused on two case studies, one representative of hydrophobic phenolic compounds and the other of hydrophilic ones. In particular, hydroxytyrosol was selected as a bioactive phenol with a hydrophilic character, while curcumin was selected as typical representative hydrophobic molecules.

Microfluidic Fabrication of pH-Responsive Nanoparticles for Encapsulation and Colon-Target Release of Fucoxanthin

Improving the stability of fucoxanthin in the gastrointestinal tract is an important approach to enhance its oral bioavailability. The study proposed a new microfluidic device allowing for the synthesis of a structurally well-defined nanoscale delivery system with a uniform size for encapsulation and colon-target release of fucoxanthin. The rapid mixing in the microfluidic channel ensured that the mixing time was shorter than the aggregation time, thus realizing the controllable control of the coprecipitation of fucoxanthin and shellac polymer. In vitro digestion tests showed that a pH stimulus-responsive release of fucoxanthin from FX/SH NPs was observed under alkaline pH conditions. The fluorescence colocalization imaging indicated that FX/SH NPs did not affect the intestine function and had a protective effect on Caco-2 cells damaged by H₂O₂ by enhancing their antioxidant capacity. Overall, this work illustrated the promise of using a microfluidic approach to fabricate the biomimetic nanodelivery system for better biocompatibility and targeting efficacy.

Tremella polysaccharides-coated zein nanoparticles for enhancing stability and bioaccessibility of curcumin

The purpose of the present research was to examine the ability of Tremella polysaccharide (TP) to stabilize zein nanoparticles (zein NPs) and appraise the performance of zein/Tremella polysaccharide nanoparticles (zein/TP NPs) in terms of encapsulating and delivering curcumin. In this study, the zein/TP NPs were fabricated based on the anti-solvent precipitation method, which were used to protect and deliver curcumin. The results suggested that TP could be deposited on the surface of zein NPs by virtue of electrostatic interaction, so as to improve the hydrophilicity of zein, provide better protection for curcumin and assemble more stable nanoparticles. Compared with zein NPs (54.73%), the zein/TP NPs exhibited higher encapsulation efficiency of curcumin (93.34%) and excellent re-dispersibility. Furthermore, the retention rate of curcumin encapsulated in zein/TP NPs reached 80.78% and 90.74% after UV irradiation and 80 °C heat treatment for 2 h, respectively, which proved that the addition of TP significantly improved the stability of curcumin. Meanwhile, in vitro digestion study demonstrated that the bioaccessibility of curcumin encapsulated in zein/TP NPs increased by 37.36% compared with in zein NPs. Therefore, the zein/TP NPs may be served as an effective and potential carrier for the delivery of nutraceuticals.

•

Zein/tremella polysaccharide nanoparticles (zein/TP NPs) were fabricated via anti-solvent deposition method.

•

Deposition of TP on zein nanoparticles improved the encapsulation efficiency of curcumin.

•

The mass ratio of zein to TP influenced physicochemical stabilities of nanoparticles.

•

Curcumin loaded in zein/TP NPs showed superior photostability and thermal stability.

•

Zein/TP NPs enhanced the bioaccessibility of curcumin in vitro gastrointestinal fluids.

Multiscale Shellac-Based Delivery Systems: From Macro- to Nanoscale

Delivery systems play a crucial role in enhancing the activity of active substances; however, they require complex processing techniques and raw material design to achieve the desired properties. In this regard, raw materials that can be easily processed for different delivery systems are garnering attention. Among these raw materials, shellac, which is the only pharmaceutically used resin of animal origin, has been widely used in the development of various delivery systems owing to its pH responsiveness, biocompatibility, and degradability. Notably, shellac performs better on encapsulating hydrophobic active substances than other natural polymers, such as polysaccharides and proteins. In addition, specially designed shellac-based delivery systems can also be used for the codelivery of hydrophilic and hydrophobic active substances. Shellac is most widely used for oral administration, as shellac-based delivery systems can form a compact structure through hydrophobic interaction, protecting transported active substances from the harsh environment of the stomach to achieve targeted delivery in the small intestine or colon. In this review, the advantages of shellac in delivery systems are discussed in detail. Multiscale shellac-based delivery systems from the macroscale to nanoscale are comprehensively introduced, including matrix tablets, films, enteric coatings, hydrogels, microcapsules, microparticles (beads/spheres), nanoparticles, and nanofibers. Furthermore, the hotspots, deficiencies, and future perspectives of shellac-based delivery system development are also analyzed. We hoped this review will increase the understanding of shellac-based delivery systems and inspire their further development.

Preparation, characterization of naringenin, β-cyclodextrin and carbon quantum dot antioxidant nanocomposites

In this work, naringenin loaded β-cyclodextrin and carbon quantum dots composite nanoparticles were successfully fabricated. The results showed that incorporation of carbon quantum dots not only enhanced antioxidant activities of nanoparticles but also improved encapsulation efficiency of naringenin. Further, the formation of composite nanoparticles was confirmed by a series of characterization methods. The zeta-potential and Fourier transform infrared spectroscopy data proved that electrostatic interaction and hydrogen bonding are dominant forces to form nanoparticles. X-Ray Diffraction experiment revealed that the material state of the formed naringenin-β-CD-CQDs nanoparticles is amorphous in opposition to the crystalline state of naringenin, β-CD and naringenin-β-CD inclusion complex. Finally, antioxidant activity analyses against DPPH, ABTS⁺ and Fe²⁺ chelating, showed an enhanced antioxidant activity of the formed composite nanoparticles compared to their constituents. These results indicated that naringenin can be effectively entrapped in β-cyclodextrin and carbon quantum dots, forming composite nanoparticles with improved antioxidant properties.

Effects of Different Drying Methods on the Characterization, Dissolution Rate and Antioxidant Activity of Ursolic Acid-Loaded Chitosan Nanoparticles

To improve the water solubility of ursolic acid (UA), UA-loaded chitosan nanoparticles were firstly prepared by the ionotropic gelation method and dried by freeze drying (FD), microwave freeze drying (MFD) and spray drying (SD). The characterization of UA-loaded chitosan nanoparticles was performed with particle size, drug loading (DL), scanning electron microscope (SEM), fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), dissolution studies and antioxidant activity. The results demonstrated that UA was successfully encapsulated into chitosan nanoparticles using sodium tripolyphosphate (TPP) as a cross-linker, with a 79% encapsulation efficiency. The spray-dried, UA-loaded chitosan nanoparticles had the lowest drug loading (11.8%) and the highest particle size (496.9 ± 11.20 nm). The particle size of UA-loaded chitosan nanoparticles dried by MFD and FD was lower, at 240.8 ± 12.10 nm and 184.4 ± 10.62 nm, respectively, and their antioxidant activity was higher than those nanoparticles dried by SD. Moreover, the drying time and energy consumption of UA-loaded chitosan nanoparticles dried by MFD and SD were lower than that of FD. The dissolution rates of UA-loaded chitosan nanoparticles prepared by FD and MFD were 60.6% and 57.1%, respectively, in a simulated gastric fluid, which was a greater value than SD (55.9%). Therefore, the UA-loaded chitosan nanoparticles encapsulation method, combined with MFD technology, showed a promising potential to improve the water solubility of UA.