Effects of the combination of repeated heat-moisture treatment and compound enzymes hydrolysis on the structural and physicochemical properties of porous wheat starch

Enhancing enzymatic resistance of starch through strategic application of food physical processing technologies

The demand for clean-label starch, perceived as environmentally friendly in terms of production and less hazardous to health, has driven the advancement of food physical processing technologies aimed at modifying starch. One of the key objectives of these modifications has been to reduce the glycaemic potency and increase resistant starch content of starch, as these properties have the potential to positively impact metabolic health. This review provides a comprehensive overview of recent updates in typical physical processing techniques, including annealing, heat-moisture, microwave and ultrasonication, and a brief discussion of several promising recent-developed methods. The focus is on evaluating the molecular, supramolecular and microstructural changes resulting from these modifications and identifying targeted structures that can foster enzyme-digestion resistance in native starch and its forms relevant to food applications. After a comprehensive search and assessment, the current physical modifications have not consistently improved starch enzymatic resistance. The opportunities for enhancing the effectiveness of modifications lie in (1) identifying modification conditions that avoid the intensive disruption of the granular and supramolecular structure of starch and (2) exploring novel strategies that incorporate multi-type modifications.

Insight into the mechanism of digestibility inhibition by interaction between corn starch with different gelatinization degree and water extractable arabinoxylan

On the basis of revealing the interaction mechanism between corn starch (CS) and water-extractable arabinoxylan (WEAX) with high/low molecular weight (H-WEAX, L-WEAX), the degree of gelatinization (DG) on structural behaviors and in vitro digestibility of CS-WEAX complexes (CS/H, CS/L) was evaluated. With the increased DG from 50 % to 95 %, the water adsorption capacity of CS/L was increased 64 %, 58 %, 47 %, which were higher than that of CS/H (39 %, 54 %, 33 %). The gelatinization of starch was inhibited by WEAX, resulting in the enhancement of crystallinity, short-range ordered structure and molecular size of CS-WEAX complexes. Stronger interaction was detected in CS/L than with CS/H as proved by the increased hydrogen bonds and electrostatic force. Complexes exhibited higher resistant starch content (RS) at diverse DG, especially for CS/L. Notability, RS content of samples with 50 % DG were increased from 27.72 % to 32.89 % (CS/H), 36.96 % (CS/L). Except for the reduction of gelatinization degree by adding WEAX, the other possible mechanisms of retarding digestibility were explained as the small steric hindrance of L-WEAX promoted encapsulation of starch granules, limiting enzyme accessibility. Additionally, the fragmentation of CS granules with high DG promoted the movement of H-WEAX, reducing the difference in digestibility compared to CS/L.

Effect of cation valence on the retrogradation, gelatinization and gel characteristics of maize starch

This study aimed to examine the impact of trivalent, divalent, or monovalent cations dissolving into water and being mixed with maize starch to influence its retrogradation, gelatinization, and gel characteristics. The result of the analysis using a differential scanning calorimeter showed that all cations raised the peak of gelatinization temperature of maize starch, especially Al3+ or Fe3+, while trivalent cations reduced the enthalpy. The result of the analysis using a rapid viscosity analyzer showed that trivalent cation caused lower trough viscosity, final viscosity, and pasting temperature but higher breakdown viscosity of maize starch than monovalent or divalent cations. Confocal laser scanning microscopy showed that the cation promoted the destruction of gelatinized maize starch granules, especially Zn2+, Fe3+, or Al3+. Additionally, trivalent Fe3+ or Al3+ caused higher gel strength of maize starch. Generally, the cation with higher valence changed more retrogradation, gelatinization, and gel characteristics of maize starch.

Changes of crystalline structure and physicochemical properties of Pueraria lobata var. thomsonii starch under water deficit

Crystal type is an important physicochemical property of starch. However, it is currently unclear whether changes in crystal type affect other properties of starch. This study discovered that water deficit resulted in an increase in small starch granules and transparency in Pueraria lobata var. thomsonii, while causing a decrease in amylose content and swelling power. Additionally, the crystal type of P. Thomsonii starch changed from CB-type to CA-type under water deficit, without significantly altering the short-range ordered structure and chain length distribution of starch. This transformation in crystal type led to peak splitting in the DSC heat flow curve of starch, alterations in gelatinization behavior, and an increase in resistant starch content. These changes in crystalline structure and physicochemical properties of starch granules are considered as adaptive strategies employed by P. Thomsonii to cope with water deficit.

Retrogradation behaviors of damaged wheat starch with different water contents

The retrogradation behaviors of five damaged wheat starches (DS) after milling 0, 30, 60, 90, and 120 min with different water contents (33, 50, 60 %) were evaluated. Milling treatment increased DS content and developed an agglomeration of small particles. After 7 days of storage, the recrystallinity and long-range ordered structure of starch pastes were increased with the contents of DS and water. This process led to a lower setback viscosity and poor leaching of amylose. LF-NMR indicated a conversion from tightly bound water and free water to weakly bound water. During storage, DS12 with 60 % water content had the highest retrogradation tendency where the retrogradation enthalpy increased by 1.5 J/g and 2.2 J/g compared with DS0 with 60 % and DS12 with 33 % water content. DS with higher water content promoted the water mobility and made the starch molecular chains migrated conveniently. These changes facilitated the recrystallinity process during retrogradation period.

Effect of dielectric barrier discharge (DBD) plasma treatment on physicochemical and 3D printing properties of wheat starch

In recent years, the focus has shifted towards carbohydrate-based hydrogels and their eco-friendly preparation methods. This study involved an investigation into the treatment of wheat starch using dielectric barrier discharge (DBD) plasma technology over varying time gradients (0, 2, 5, 10, 15, and 20 min). The objective was to systematically examine the impact of different treatment durations on the physicochemical properties of wheat starch and the suitability of its gels for 3D printing. Morphology of wheat starch remained intact after DBD treatment. However, it led to a reduction in the amylose content, molecular weight, and crystallinity. This subsequently resulted in a decrease in the pasting temperature and viscosity. Moreover, the gels of the DBD-treated starch exhibited superior 3D printing performance. After a 2-min DBD treatment, the 3D printed samples of the wheat starch gel showed no significant improvements, as broken bars were evident on the surface of the 3D printed graphic, whereas DBD-20 showed better printing accuracy and surface structure, compared to the original starch without slumping. These results suggested that DBD technology holds potential for developing new starch-based gels with impressive 3D printing properties.

Impact of flaxseed gum on the aggregate structure, pasting properties, and rheological behavior of waxy rice starch

This study examines the effects of flaxseed gum (FG) on the aggregate structure, pasting and rheological properties of waxy rice starch (WRS). Results display an increase in the ordered molecular structure (R1047/1024), relative crystallinity (RC), compactness (α), and microphase heterogeneity (ε, density degree of nanoaggregates, from 3.52 to 4.23) for WRS-FG complexes. These suggested FG facilitated the development of more organized molecular and crystalline structures of WRS, accompanied by the formation of ordered nanoaggregates with higher density (i.e., nano-aggregation structure). Also, FG addition resulted in the formation of enhanced gel network structure characterized by thicker layer walls and more uniform pores. These structural transformations contributed to a rise in gelatinization temperature (To, from 56.90 °C to 62.10 °C) and enthalpy (ΔH), as well as alterations in paste viscosities (PV, from 1285.00 mPa·s to 1734.00 mPa·s), and the rigidity of network structure (e.g., decreased loss tangent). These results indicate that FG could effectively regulate the techno-functional properties of WRS by rationally controlling the starch intrinsic structures of starch. And this study may improve the pasting and gelling properties of starch, thus driving the development of high-quality starchy foods and prolonging their shelf life, especially for glutinous rice flour products.

Development of bovine serum albumin-modified Fe3O4 embedded in porous α-ketoglutaric acid/chitosan (BSA/Fe3O4@KA/CS): A magnetically targeted hemostatic dressing for deep and irregular wounds

Severe bleeding from deep and irregular wounds poses a significant challenge in prehospital and surgical settings. To address this issue, we developed a novel chitosan-based hemostatic dressing with a magnetic targeting mechanism using Fe3O4, termed bovine serum albumin-modified Fe3O4 embedded in porous α-ketoglutaric acid/chitosan (BSA/Fe3O4@KA/CS). This dressing enhances hemostasis by magnetically guiding the agent to the wound site. In vitro, the hemostatic efficacy of BSA/Fe3O4@KA/CS is comparable to that of commercial chitosan (Celox™) and is not diminished by the modification. In vivo, BSA/Fe3O4@KA/CS demonstrated superior hemostatic performance and reduced blood loss compared to Celox™. The hemostatic mechanism of BSA/Fe3O4@KA/CS includes the concentration of solid blood components through water absorption, adherence to blood cells, and activation of the endogenous coagulation pathway. Magnetic field targeting is crucial in directing the dressing to deep hemorrhagic sites. Additionally, safety assessments have confirmed the biocompatibility and biodegradability of BSA/Fe3O4@KA/CS. In conclusion, we introduce a novel approach to modify chitosan using magnetic guidance for effective hemostasis, positioning BSA/Fe3O4@KA/CS as a promising candidate for managing various wounds.

Micro-encapsulation of garlic oil using esterified-wheat porous starch and whey protein isolate: Physicochemical properties, release behavior during in vitro digestion

The study aimed to inhibit the stimulating impact of garlic oil (GO) on the stomach and attain high release in the intestine during digestion. So, wheat porous starch (WPS) was modified with octenyl succinic acid (OSA) and malic acid (MA) to obtain esterified WPS, OWPS and MWPS, respectively. The differences in physicochemical, encapsulation, and digestive properties of two GO microcapsules, WPI/OWPS/GO and WPI/MWPS/GO microcapsules produced by using OWPS and MWPS as variant carrier materials and whey protein isolate (WPI) as the same coating agent, were compared. The results found that OWPS had greater amphiphilicity, while MWPS had better hydrophobicity and anti-digestive ability than WPS. Encapsulation efficiency of WPI/OWPS/GO (94.67 %) was significantly greater than WPI/MWPS/GO (91.44 %). The digestion inhibition and low GO release (approximately 23 %) of WPI/OWPS/GO and WPI/MWPS/GO microcapsules in the gastric phase resulted from the protective effect of WPI combined with the good adsorption and lipophilicity of OWPS and MWPS. Especially, WPI/OWPS/GO microcapsule was relatively stable in the gastric phase and had sufficient GO release (67.24 %) in the intestinal phase, which was significantly higher than WPI/MWPS/GO microcapsule (56.03 %), benefiting from the adsorption and digestive properties of OWPS, and resulting in a total cumulative GO release rate of 90.86 %.

Resistant Starch from Purple Sweet Potatoes Alleviates Dextran Sulfate Sodium-Induced Colitis through Modulating the Homeostasis of the Gut Microbiota

Ulcerative colitis (UC) is a complicated inflammatory disease with a continually growing incidence. In this study, resistant starch was obtained from purple sweet potato (PSPRS) by the enzymatic isolation method. Then, the structural properties of PSPRS and its protective function in dextran sulfate sodium (DSS)-induced colitis were investigated. The structural characterization results revealed that the crystallinity of PSPRS changed from CA-type to A-type, and the lamellar structure was totally destroyed during enzymatic hydrolysis. Compared to DSS-induced colitis mice, PSPRS administration significantly improved the pathological phenotype and colon inflammation in a dose-dependent manner. ELISA results indicated that DSS-induced colitis mice administered with PSPRS showed higher IL-10 and IgA levels but lower TNF-α, IL-1β, and IL-6 levels. Meanwhile, high doses (300 mg/kg) of PSPRS significantly increased the production of acetate, propionate, and butyrate. 16S rDNA high-throughput sequencing results showed that the ratio of Firmicutes to Bacteroidetes and the potential probiotic bacteria levels were notably increased in the PSPRS treatment group, such as Lactobacillus, Alloprevotella, Lachnospiraceae_NK4A136_group, and Bifidobacterium. Simultaneously, harmful bacteria like Bacteroides, Staphylococcus, and Akkermansia were significantly inhibited by the administration of a high dose of PSPRS (p < 0.05). Therefore, PSPRS has the potential to be a functional food for promoting intestinal health and alleviating UC.

A review of the effects of fermentation on the structure, properties, and application of cereal starch in foods

Fermentation is one of the oldest food processing techniques known to humans and cereal fermentation is still widely used to create many types of foods and beverages. Starch is a major component of cereals and the changes in its structure and function during fermentation are of great importance for scientific research and industrial applications. This review summarizes the preparation of fermented cereals and the effects of fermentation on the structure, properties, and application of cereal starch in foods. The most important factors influencing cereal fermentation are pretreatment, starter culture, and fermentation conditions. Fermentation preferentially hydrolyzes the amorphous regions of starch and fermented starches have a coarser appearance and a smaller molecular weight. In addition, fermentation increases the starch gelatinization temperature and enthalpy and reduces the setback viscosity. This means that fermentation leads to a more stable and retrogradation-resistant structure, which could expand its application in products prone to staling during storage. Furthermore, fermented cereals have potential health benefits. This review may have important implications for the modulation of the quality and nutritional value of starch-based foods through fermentation.

Pasting properties of A- and B-type wheat starch granules and annealed starches in relation to swelling and solubility

Wheat starch contains two distinct groups of granules, A-type and B-type, which have different compositions and properties. The aim of this study was to investigate the differences in pasting properties of A- and B-type wheat starch granules and their annealed starches, and to relate them to swelling properties and solubility. A- and B-type wheat starch granules were fractionated. The differences in pasting properties between A- and B-type wheat starch granules depended on starch solids content. The A-type starch had a higher pasting viscosity at ≥8 % solids content, but the trend was reversed at a lower solids content (5 %). This cross-over phenomenon in the pasting viscosity can be explained because A-type wheat starch granules have more starch molecules leached out, while swelled less at high temperatures and are probably more rigid than B-type wheat starch granules. This is the first study to show the cross-over in the pasting viscosity-starch concentration between A-type and B-type wheat starches and that B-type wheat starch has higher pasting viscosity than A-type at a low solids content. When annealed in warm water, both annealed A- and B-type wheat starch granules had higher pasting viscosities than untreated counterparts by altering the swelling of starch.

Physicochemical properties of a novel chestnut porous starch nanoparticle

A novel chestnut porous starch nanoparticle (PSNP) was successfully synthesized, combining the properties of starch nanoparticle (SNP) and porous starch. The SNP obtained through ultrasonic and acid hydrolysis, exhibited a smaller particle size (173.9 nm) and a higher specific surface area (SSA) compared to native starch. After the synergistic hydrolysis by α-amylase and glucoamylase, the porous structure appeared on the surface of SNP. The prepared PSNP had a size of 286.3 nm and the highest SSA. In the adsorption experiments, PSNP showed higher capacities for adsorbing water, oil and methylene blue (MB) compared to other samples. The acid and enzymatic treatments resulted in a decrease in the levels of total starch content and amylose ratio. Furthermore, the treatments increased the levels of relative crystallinity (RC) and solubility, while decreasing the short-range ordered structure and swelling ratio at high temperatures. It was observed that the SSA of starch granules positively correlated with the MB and water adsorption capacity (WAC), solubility, and RC. These findings highlight the potential of the novel PSNP as an efficient adsorbent for bioactive substances and dyes.

Effect of plasma-activated water on the formation of endogenous wheat starch-lipid complexes during extrusion

The aim of this study was to investigate the effect of plasma-activated water (PAW) during extrusion on the formation of endogenous starch complexes with wheat starch (WS) as a model material. Using PAW during the extrusion process resulted in an increase in amylose content from 27.87 % to 30.07 %. Results from Fourier transform infrared spectroscopy, X-ray diffraction, and differential scanning calorimetry indicated that the PAW facilitated the formation of endogenous starch-lipid complexes during extrusion. PAW120 (distilled water treated by plasma for 120 s) showed a better promotion effect than PAW60 (distilled water treated by plasma for 60 s). EWS120 (WS extruded using PAW120) exhibited lower peak viscosity and swelling power, but higher solubility, particle size, and resistant starch content compared with EWS0 (WS extruded using distilled water) and EWS60 (WS extruded using PAW60). In a word, the acidic substances in PAW may lead to hydrolysis of starch and generate more amylose, thus improving the amount of endogenous starch-lipid complexes. The present study provides a novel extrusion method to obtain modified starch with higher RS content than common extrusion, which has potential application in the industrial production of functional foods with low glycemic index.

Exploring the effects of enzymatic and thermal treatments on banana starch characteristics

Banana starch has a highly resistant starch (RS) and slow-digested starch (SDS) content, making it attractive as a functional ingredient. Unfortunately, banana starch requires modification processes due to the loss of RS and SDS during gelatinization because of its thermolabile characteristics. This study explores the effect of banana starch modification by enzymatic, heat moisture treatment (HMT) and dual modification (HMT+ enzymatic) on its nutritional (RS, SDS) and functional properties (hydration, structural, gelation, rheological). HMT and dual modifications decrease RS (from 44.62 g/100 g to 16.62 and 26.66 g/100 g, respectively) and increase SDS (from 21.72 g/100 g to 33.91 and 26.95 g/100 g, respectively) in raw starch but induce structural changes that enhance RS (from 3.10 g/100 g to 3.94 and 4.4 g/100 g, respectively) and SDS (from 2.58 g/100 g to 9.58 and 11.48 g/100 g) thermo-resistance in gelled starch. Also, changes in the functional properties of starches were evidenced, such as weaker gels (hardness < 41 g), lower water absorption (<12.35 g/g), high starch solubility (>1.77 g/100 g) and increased gelatinization temperature. Improved gelatinization temperature and RS thermostability resulted from modifications that could expand banana starch applications as a beverage and compote thickener agent.

Expanded porous-starch matrix as an alternative to porous starch granule: Present status, challenges, and future prospects

Exposing the hydrated-soft-starch matrix of intact grain or reconstituted flour dough to a high-temperature-short-time (HTST) leads to rapid vapor generation that facilitates high-pressure build-up in its elastic matrix linked to large deformation and expansion. The expanded starch matrix at high temperatures dries up quickly by flash vaporization of water, which causes loss of its structural flexibility and imparts a porous and rigid structure of the expanded porous starch matrix (EPSM). EPSM, with abundant pores in its construction, offers adsorptive effectiveness, solubility, swelling ability, mechanical strength, and thermal stability. It can be a sustainable and easy-to-construct alternative to porous starch (PS) in food and pharmaceutical applications. This review is a comparative study of PS and EPSM on their preparation methods, structure, and physicochemical properties, finding compatibility and addressing challenges in recommending EPSM as an alternative to PS in adsorbing, dispersing, stabilizing, and delivering active ingredients in a controlled and efficient way.

Oil structuring from porous starch to powdered oil: Role of multi-scale structure in the oil adsorption and distribution

Oil structuring from porous starch is a potential alternative for the industrial production of powdered oil, but their relationship between starch multi-scale structure and oil adsorption characteristics was not clear. This study compared the role of multi-scale structure of porous starch (PS) prepared by normal and waxy maize starch in the oil adsorption. Waxy maize porous starch exhibited higher oil adsorption capacity (32.43 %-98.71 %) and more oil distributed on the surface of granules than normal maize porous starch, resulting from the more pores, larger specific surface area (1.01-1.53 m2/g), and pore size (8.45-9.32 nm). The enzymolysis time of native starch dominated oil distribution, leading to different granule adhesion and aggregation state. Pearson correlation analysis further showed oil adsorption capacity was negatively correlated with particle size, but positively correlated with enzymolysis rate and specific surface area of PS. The formation of powdered oil was mainly through the physical adsorption, including surface adsorption and pore adsorption. These findings could provide a promising route for the preparation of powdered oil with controlled multi-scale structure of PS.

Adsorption properties of corn starch modified by malt amylases and crosslinking agents: A comparison between sodium trimetaphosphate and organic acids

In order to investigate the effects of different crosslinking agents on physicochemical properties and adsorption properties of porous starch. Native corn starch was hydrolyzed by maltase and crosslinked with different crosslinking agents. Sodium trimetaphosphate crosslinked porous starch (STMP-MPS), malic acid cross-linked porous starch (MA-MPS) and citric acid cross-linked porous starch (CA-MPS) were prepared. After crosslinking, MA-MPS and CA-MPS showed a new CO stretching absorption peak at 1738 cm-1, and the crosslinking degree was much higher than that of STMP-MPS. The surface area of MA-MPS was 36 % higher than that of STMP-MPS. Compared with the average pore size of 12.43 nm of STMP-MPS, CA-MPS (14.02 nm) and MA-MPS (14.79 nm) were increased more significantly. The degradation temperature of MA-MPS and CA-MPS was increased by the introduction of ester bond, which indicates that the organic acid cross-linking strengthens the starch granules and hence more energy is required for disruption. Compared with STMP-MPS, the water absorption of MA-MPS and CA-MPS increased by 64 % and 32 %, respectively. Furthermore, the adsorption capacity of MA-MPS to essential oil was the strongest, about 4 times that of STMP-MPS. Overall, it is feasible to modify porous starch by crosslinking reaction to improve its heat resistance and adsorption properties.

Comparison of structures and properties of gels formed by corn starch with fresh or dried Mesona chinensis polysaccharide

Starch is a major dietary carbohydrate, but its digestion properties need to be improved. Mesona chinensis polysaccharides (MCPs) had a unique function in improving the flocculation performance of starch. This study investigated the effects of adding Mesona chinensis polysaccharide extracted from wet fresh and dry plants with one-year storage, namely WMCP and DMCP, on the physicochemical properties and digestion kinetics of corn starch(CS). The composition analysis showed both WMCP and DMCP were an acidic heteropolysaccharide rich in galacturonic acid and galactose, whereas showed different average main fraction molecular weights (Mw) of 47.36 kDa and 42.98 kDa, respectively. In addition, WMCP showed higher yield, purity and better physicochemical properties to CS than DWCP. Thermal analysis showed WMCP decreased more gelatinization temperatures and enthalpy of CS, and increased more freeze-thaw stability, water holding capacity, and textural parameters of CS gels than DMCP. Structural analysis revealed WMCP induced more changes in crystallinity, short-range order, and microstructure of CS, which inhibited retrogradation than DMCP. In vitro digestion assays demonstrated WMCP addition significantly increased higher resistant starch content by altering starch-starch and starch-MCP interactions than DWCP. Overall, MCPs addition beneficially modulated CS properties and digestion kinetics, providing a novel way to improve starch functionalities. Moreover, WMCP had more advantages to be chosen to form hydrocolloid with CS than DMCP.

Fabrication and study on dually modified starch embedded in alginate hydrogel as an encapsulation system for Satureja essential oil

This study aimed to investigate how the types and order of modifications influence the structure and physicochemical characteristics of modified porous starch. The work focuses on the encapsulation of essential oil in hydrophobic microcapsules embedded in sodium alginate hydrogels. FTIR spectra indicated successful esterification of starch with OSA. 1047:1022 cm-1 and 1022:995 cm-1 band ratios of FTIR spectra revealed increased crystallinity due to enzymatic modification, supported by XRD patterns. Porous-OSA (PO) starch had 1.5 times higher degree of substitution (DS) than OSA-porous (OP) starch, confirmed by the intense peak at 0.85 ppm in 1H NMR spectra. SEM images displayed larger particles and smaller pore diameter in OP compared to PO and porous starch, indicating amylolytic enzyme inhibition by OSA. Loading efficiency (LE) showed no significant difference between OP and PO microcapsules (≈70 %), both significantly higher other starch microcapsules. OP and PO microcapsules exhibited sustained release, with enhanced antibacterial activity. Alginate hydrogels preserved about 60 % antioxidant and 90 % antibacterial activities of SEO against 2 h of UV radiation. These findings suggest that the order of modification could not affect the functional properties of final microcapsules. Additionally, the importance of alginate hydrogels as the protective and second wall material was disclosed.

Effect of melting combined with ice recrystallization on porous starch preparation: Pore-forming properties, granular morphology, functionality, and multi-scale structures

In this work, critical melting (CM) combined with freeze-thawing treatment (FT, freezing at -20 ℃ and -80 ℃, respectively) was used to prepare porous starch. The results showed that CM combined with the slow freezing rate (-20 ℃) can prepare porous starch with characteristics of grooves and cavities, while combined with the rapid freezing rate (-80 ℃) can prepare with holes and channels, especially after repeating FT cycles. Compared with the native counterpart, the specific surface area, pore volume, and average diameter of CMFT-prepared porous starch were significantly increased to 4.07 m2/g, 7.29 cm3/g × 10-3, and 3.57 nm, respectively. CMFT significantly increased the thermal stability of starch, in which the To, Tp, and Tc significantly increased from 63.32, 69.62, and 72.90 (native) to ∼69, 72, and 76 °C, respectively. CMFT significantly increased water and oil absorption of porous starch from 91.20 % and 72.00 % (native) up to ∼163 % and 94 %, respectively. Moreover, CMFT-prepared porous starch had a more ordered double-helical structure, which showed in the significantly increased relative crystallinity, semi-crystalline lamellae structure, and the proportion of the double helix structure of starch. The synergistic effect of melting combined with ice recrystallization can be used as an effective way to prepare structure-stabilized porous starch.

Solid state cationization reaction of microporous starch with betaine hydrochloride under repeated heating/cooling cycles: Design of a green approach for corn starch modification

In this research, the cationization process of microporous starch with betaine hydrochloride (BHC) in the presence of H3PO4 (as a catalyst) under heating/cooling cycles was reported for the first time. Granular microporous starch was initially prepared from normal corn starch (NS) through amyloglucosidase treatment. Then, solid state cationization reaction of microporous starch (MS) with betaine hydrochloride (BHC) was performed under repeated dry-heat modification. The cationic microporous starch showed higher substitution degree (0.031) and reaction efficiency (89.1 %) in comparison with cationic starch based on NS (0.021, 60.3 %), which this can be attributed to the increased probability of effective collision between BHC molecules and starch granules after enzymatic treatment. The analysis of cationic starches by FTIR and 13C NMR confirmed the presence of cationic functional groups on starch chains. Further examinations on the modified starches by single and dual treatments were accomplished with respect to morphology, particle size distribution, X-ray powder diffraction (XRD), colour parameters, zeta potential, amylose content, viscosity, solubility, and swelling power. The greenness of the suggested dual treatment (score: 82) in this work was evaluated and compared to a conventional method reported in literature (score: 67) on the preparation of cationic starches.

Ultrasound-assisted acid/enzymatic hydrolysis preparation of loquat kernel porous starch: A carrier with efficient palladium loading capacity

Porous starch, with excellent renewal and thermodynamic stability characteristics, could be utilized as a novel carrier for metals. In this research, starch was obtained from wasted loquat kernel (LKS) and converted into loquat kernel porous starch (LKPS) through ultrasound-assisted acid/enzymatic hydrolysis. Then, LKS and LKPS were utilized for loading with palladium. The porous structures of LKPS were evaluated by the results of water/oil absorption rate and N2 adsorption analysis, and the physicochemical properties of LKPS and starch@Pd were analyzed by FT-IR, XRD, SEM-EDS, ICP-OES, and DSC-TAG. LKPS prepared by the synergistic method formed a better porous structure. Its specific surface area was 2.65 times that of LKS, and the water/oil absorption capabilities were considerably improved to 152.28 % and 129.59 %, respectively. XRD patterns showed that the presence of diffraction peaks at 39.7° and 47.1°, indicating successful palladium loading onto LKPS. The EDS and ICP-OES results revealed that the palladium loading capacity of LKPS was superior to that of LKS, with a significantly increased loading ratio of 2.08 %. In addition, LKPS@Pd exhibited excellent thermal stability, with a temperature range of 310-320 °C. Therefore, LKPS was a palladium carrier with highly efficient loading ratio, and LKPS@Pd had promising properties as a competent catalyst.

Pulsed Electric Field-Assisted Enzymatic and Alcoholic-Alkaline Production of Porous Granular Cold-Water-Soluble Starch: A Carrier with Efficient Zeaxanthin-Loading Capacity

In this study, porous starch was modified using pulsed electric field (PEF) pretreatment and alcoholic-alkaline treatment to prepare porous granular cold-water-soluble starch (P-GCWSS). The soluble porous starch has high adsorption capability and high cold water solubility, allowing effective encapsulation of zeaxanthin and improving zeaxanthin's water solubility, stability, and bioavailability. The physical and chemical properties of GCWSS and complex were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The results showed that the cold water solubility of the pulsed electric field-treated porous granular cold-water-soluble starch (PEF-P-GCWSS) increased by 12.81% compared to granular cold-water-soluble starch (GCWSS). The pulsed electric field treatment also increased the oil absorption of PEF-P-GCWSS was improved by 15.32% compared to porous granular cold-water-soluble starch (P-GCWSS). PEF-P-GCWSS was effective in encapsulating zeaxanthin, which provided a good protection for zeaxanthin. The zeaxanthin-saturated solubility in water of PPG-Z was increased by 56.72% compared with free zeaxanthin. The zeaxanthin embedded in PEF-P-GCWSS was able to be released slowly during gastric digestion and released rapidly during intestinal digestion.

Hydrothermal processes and simultaneous enzymatic hydrolysis in the production of modified cassava starches with porous-surfaces

The amylolytic action of α-amylase and amyloglucosidase has been directly implemented in native cassava starches for the formation of cassava microporous granules with unsatisfactory results, however, its incidence in hydrothermally treated granules has never been evaluated. The effect of hydrothermal processes and simultaneous enzymatic hydrolysis on the physicochemical, morphological and structural properties of native cassava starch was evaluated. Native cassava starch presented a rigid, smooth surface, and was exempt from porosities, whereas hydrothermal processes altered the semicrystalline order and increasing the size and number of pores and increasing the size (4.11 ± 0.09 nm) and volume of pores (0.82 ± 0.00 cm3/g × 10-3). The hydrothermal action followed by enzymatic processes with α-amylase and amyloglucosidase, augmented the processes of internal degradation (endo-erosion) and pore widening (exo-erosion), improving the hydrophilic properties compared to the hydrothermal treatment. Likewise, the hydrothermally process followed by enzymatic hydrolysis for 24 h (HPS + EMS-24) increased the degradation of the amorphous lamellae, consistent with a significant decrease in amylose content. This same dual treatment increased the pore size at 17.68 ± 0.13 nm relative to the native counterpart; therefore, they are considered an effective method in the development of modified cassava starches with porous surfaces.

Modified porous starches loading curcumin and improving the free radical scavenging ability and release properties of curcumin

Maize porous starch-curcumin microspheres were prepared by encapsulating curcumin into cross-linked porous starch and oxidized porous starch to investigate the effect of modified porous starch in embedding and protecting curcumin. The morphology and physicochemical properties of microspheres were analyzed using scanning electron microscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction, Zeta/DLS, Thermal stability, and antioxidant activity; the release of curcumin was evaluated with a simulated gastric-intestine model. The FT-IR results revealed that curcumin was amorphously encapsulated in the composite and hydrogen bond formation between starch and curcumin was one of the major driving forces for encapsulation. Microspheres increased the initial decomposition temperature of curcumin, which has a protective effect on curcumin. Modification improved the encapsulation efficiency and the scavenging free radical ability of porous starch. The release mechanism of curcumin from microspheres fits first-order and Higuchi models well in gastric and intestinal models, respectively, indicating that encapsulation of curcumin within different porous starches microspheres enables controlled release of curcumin. To recapitulate, two different modified porous starch microspheres improved the drug loading, slow release and free radical scavenging effects of curcumin. Among them, the cross-linked porous starch microspheres had higher encapsulation and slow release ability for curcumin than the oxidized porous starch microspheres. It provides theoretical significance and data basis for the encapsulation of active substances by modified porous starch.

Physical modification of high amylose starch using electron beam irradiation and heat moisture treatment: The effect on multi-scale structure and in vitro digestibility

This study explores a new strategy for manipulating the digestibility of high-amylose maize starch (HAMS) through combinative modifications, namely depolymerization via electron beam irradiation (EBI) followed by reorganizing glucan chains via heat moisture treatment (HMT). The results show that semi-crystalline structure, morphological features and thermal properties of HAMS remained similar. However, EBI increased branching degree of the starch at high irradiation dosage (20 kGy), resulting in more readily leached amylose during heating. HMT increased the relative crystallinity (3.9-5.4% increase) and V-type fraction (0.6-1.9% increase), without significant changes (p > 0.05) in gelatinization onset temperature, peak temperature and enthalpy. Under simulated gastrointestinal conditions, the combination of EBI and HMT either had no effect or negative effect on starch enzymatic resistance, depending on the irradiation dosage. These results suggest that the depolymerization by EBI predominantly affects the changes in enzyme resistance, rather than the growth and perfection of crystallites induced by HMT.

Green preparation of 3D micronetwork eugenol-encapsuled porous starch for improving the performance of starch-based antibacterial film

In order to find a non-enzymatically treated alternative wall material with effective encapsulation properties, and to reduce the use of conventional non-biodegradable plastics, a novel 3D-micronetwork porous starch (3D-MPS) was created via a modified sacrificial template method to encapsulate eugenol (3D-EMPS) and used to incorporate with TiO₂-starch film, for significantly improving the performance of starch-based antibacterial film. At the template SiO₂ nanoparticles concentration of 0.1 %, the 3D-MPS exhibited anticipated alveolate structure with internal aperture of approximately 10 μm confirmed by SEM. With addition of 3D-EMPS, higher tensile strength (29.70 Mpa) and water barrier property (924 g/cm²·24 h) of the composite film was obtained. Moreover, molecular docking technique was used to model the intermolecular forces, which showed that the major forces maintaining the internal bonding of the composite film were hydrogen bonding and the interaction between eugenol and 3D-MPS skeleton in 3D-EMPS. Meanwhile, the composite film demonstrated the expected eugenol retardation and antimicrobial capacity against S. aureus, E. coli, and B. subtilis. Finally, the composite films were used for evaluating the feasibility in the actual food, which largely extended its shelf life compared to the negative control. This high-performance film revealed their potential for packaging materials application.

Effects of high-speed shear and double-enzymatic hydrolysis on the structural and physicochemical properties of rice porous starch

This study aimed to investigate the physicochemical properties of the rice porous starch (HSS-ES) prepared by high-speed shear combined with double-enzymatic (α-amylase and glucoamylase) hydrolysis, and to reveal their mechanism. The analyses of ¹H NMR and amylose content showed that high-speed shear changed the molecular structure of starch and increased the amylose content (up to 20.42 ± 0.04 %). FTIR, XRD and SAXS spectra indicated that high-speed shear did not change the starch crystal configuration but caused a decrease in short-range molecular order and relative crystallinity (24.42 ± 0.06 %), and a loose semi-crystalline lamellar, which were beneficial to the followed double-enzymatic hydrolysis. Therefore, the HSS-ES displayed a superior porous structure and larger specific surface area (2.962 ± 0.002 m²/g) compared with double-enzymatic hydrolyzed porous starch (ES), resulting in the increase of water and oil absorption from 130.79 ± 0.50 % and 109.63 ± 0.71 % to 154.79 ± 1.14 % and 138.40 ± 1.18 %, respectively. In vitro digestion analysis showed that the HSS-ES had good digestive resistance derived from the higher content of slowly digestible and resistant starch. The present study suggested that high-speed shear as an enzymatic hydrolysis pretreatment significantly enhanced the pore formation of rice starch.

Effects of particle size on quality characteristics of stone-milled whole wheat flour

BACKGROUND

Whole wheat flour (WWF) prepared by the direct crushing method preserves all the components of the whole wheat grain. WWF with different particle sizes (180, 150, 125, 106, and 96 μm) was obtained by combining stone milling and particle size sieving technology. The effects of particle size on the proximate composition, farinograph, pasting, thermal, and functional properties, starch microstructure, and Fourier-transform infrared (FTIR) spectroscopy of stone-milled WWF were investigated.

RESULTS

The smaller the particle size of WWF, the higher the damaged starch content. The water absorption, degree of softening, pasting temperature, solubility, and syneresis of WWF increased steadily as the particle size decreased, whereas the peak viscosity, final viscosity, swelling power, water holding capacity, and enthalpy of gelatinization decreased. The scanning electron microscope micrographs revealed that the larger the particle size of WWF, the denser the distribution of starch granules. The β-sheet and β-turn contents of WWF with particle size 180 μm were the highest, reaching up to 33.85% and 39.79%, respectively.

CONCLUSION

The particle size exerted influence on the quality characteristics of stone-milled WWF, and the overall properties of WWF were better at medium particle size. © 2023 Society of Chemical Industry.

Combining pulsed electric field and cross-linking to enhance the structural and physicochemical properties of corn porous starch

In this study, corn porous starch (CPS) was firstly prepared using enzymatic hydrolysis, followed by pore formation enhancement using the treatment of a pulsed electric field (PEF). Subsequently, the PEF treated porous starch (CPS-PEF) was cross-linked with sodium trimetaphosphate (STMP) to investigate its structural and functional properties. The results showed PEF treatment increased the oil absorption of CPS by 26.92% and improved its specific surface area, total pore volume value, solubility and swelling power. After cross-linking of the CPS-PEF, C-O-P covalent bonds were formed between CPS-PEF molecules, resulting in a further increase in oil absorption and specific surface area properties. Moreover, the covalent bonds enhanced the intermolecular forces, resulting in increased thermal stability of the cross-linked porous starch (ScPS). The double modification resulted in significantly improved adsorption properties and better thermal stability of the ScPS, indicating that the double modification is an effective method for the preparation of porous starches.

Effect of extrusion parameters on the interaction between rice starch and glutelin in the preparation of reconstituted rice

Reconstituted rice produced by extrusion has been attracted attention due to nutritional fortification and convenient production. Nevertheless, how to achieve desirable qualities and physicochemical properties of reconstituted rice nearly to natural rice by regulating extrusion process parameters is difficult. Herein, rice starch/glutelin mixture as raw material of reconstituted rice was extruded at varying extrusion conditions. Specific mechanical energy (SME) and sectional expansion index (SEI) dropped with rise in density (R² = 0.9117 and 0.8207). Solubility was enhanced with increase in product temperature (R² = 0.9085), color darkened and shifted to reddish and yellowish as extrusion temperature increased (R² = 0.8577). These trends were well fitted by sigmoid models. Furthermore, SME enhanced hydrophobic and electrostatic interactions between rice starch and glutelin and caused the reduction in crystallinity and thermal stability, promoting the formation of a bi-continuous matrix of protein aggregates with rice starch. The obtained results can be applied to guide the production of reconstituted rice with desirable qualities.

Porous corn starch obtained from combined cold plasma and enzymatic hydrolysis: Microstructure and physicochemical properties

The combined effect of cold plasma treatment and enzymatic hydrolysis was investigated on the physicochemical and microstructural properties of porous corn starch. Scanning electron microscopy (SEM) images depicted that the combined treatment led to the creation of deeper pores on the surface of starch granules. The combined treatment indicated the highest swelling power (19.49 g/g), solubility (10.08 %), specific surface area (2.97 m²/g) and total pore volume (10.47 cm³/g). According to the X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC), the combined treatment, compared with the enzymatic hydrolysis, decreased the starch crystallinity, the order of the double-helix structure, and the starch gelatinization enthalpy. The rapid visco analyzer (RVA) pasting profile revealed that the combined treatment elevated the breakdown and setback viscosities. This study indicated that cold plasma pretreatment, as a green non-thermal technology, facilitated the performance of enzymes, resulting in the production of a porous starch with a higher absorption capacity.

Effects of Heat-Moisture Treatment on the Digestibility and Physicochemical Properties of Waxy and Normal Potato Starches

Heat-moisture treatment (HMT) is a safe, environmentally friendly starch modification method that reduces the digestibility of starch and changes its physicochemical properties while maintaining its granular state. Normal potato starch (NPS) and waxy potato starch (WPS) were subjected to HMT at different temperatures. Due to erosion by high-temperature water vapor, both starches developed indentations and cracks after HMT. Changes were not evident in the amylose content since the interaction between the starch molecules affected the complexation of amylose and iodine. HMT increased pasting temperature of NPS from 64.37 °C to 91.25 °C and WPS from 68.06 °C to 74.44 °C. The peak viscosity of NPS decreased from 504 BU to 105 BU and WPS decreased from 384 BU to 334 BU. The crystallinity of NPS decreased from 33.0% to 24.6% and WPS decreased from 35.4% to 29.5%. While the enthalpy values of the NPS declined from 15.74 (J/g) to 6.75 (J/g) and WPS declined from 14.68 (J/g) to 8.31 (J/g) at 120 °C. The solubility and swelling power of NPS decreased while that of WPS increased at 95 °C. Due to the lack of amylose in WPS, at the same HMT processing temperature, the reduction in peak viscosity of treated WPS compared to that of native starch was smaller than that of NPS. The resistant starch (RS) content of NPS after HMT at 120 °C was 73.0%. The slowly digestible starch (SDS) content of WPS after HMT at 110 °C was 37.6%.

Porous Microparticles of Corn Starch as Bio-Carriers for Chia Oil

Native corn starch and pretreated corn starch were treated with α-amylase, glucoamylase and mixtures of both to generate starches with high porosity with conserved granular structure. Porous starches were characterized; particle size distribution analysis, nitrogen adsorption-desorption analysis, scanning electron microscopy, water and oil adsorption capacity, differential scanning calorimeter, X-ray diffraction and damaged starch techniques were used. The α-amylase/glucoamylase mixture at the highest dose was the best treatment to generate porous starches with interesting adsorption capacity and granular structure conservation. Selected starches were impregnated with chia oil using a vacuum. Pretreated corn starch modified with the α-amylase/glucoamylase mixture showed no significant differences on impregnation capacity compared with native starch with a similar enzyme treatment. The highest oxidative stability was achieved with pretreated porous starch impregnated with 10 to 25% chia oil, compared with the bulk oil (5.37 to 4.72 and 2.58 h, respectively). Results have demonstrated that vacuum impregnation could be a potential technique for the incorporation of oil in porous structures based on starch and porous starches obtained by enzymatic hydrolysis are a promising material for the incorporation and protection of oils susceptible to oxidation.

Dual Modification of Sago Starch via Heat Moisture Treatment and Octenyl Succinylation to Improve Starch Hydrophobicity

To elucidate the pretreatment of a heat moisture treatment that could increase the DS and hydrophobicity of OSA starch, the effect of the moisture level of the HMT process on the physicochemical properties was investigated. The higher moisture content (MC) in the HMT process led to a decreasing degree of crystallinity and gelatinization enthalpy and also produced surface damage and cracking of the granules. HMT pretreatment with the right moisture content resulted in OSA starch with the maximum DS value and reaction efficiency. Pre-treatment HMT at 25% MC (HMT-25) followed by OSA esterification exhibited the highest DS value (0.0086) and reaction efficiency (35.86%). H25-OSA starch has been shown to have good water resistance (OAC 1.03%, WVP 4.92 × 10-5 g/s m Pa, water contact angle 88.43°), and conversely, has a high cold water solubility (8.44%). Based on FTIR, there were two new peaks at 1729 and 1568 cm-1 of the HMT-OSA starch, which proved that the hydroxyl group of the HMT starch molecule had been substituted with the carbonyl and carboxyl ester groups of OSA.

Structure and Menthone Encapsulation of Corn Starch Modified by Octenyl Succinic Anhydride and Enzymatic Treatment

In order to improve the ability of starch to absorb menthone, corn starch was modified by enzymatic treatment (amyloglucosidase and α-amylase) combined with octenyl succinic anhydride (OSA) esterification. The oil absorption rate of starch modified by enzymatic treatment followed by OSA (P-OSA) reached 101.33%, whereas that of samples with reverse action sequences (OSA-P) was only 59.67%. The degree of substitution of OSA-P was also generally lower than that of P-OSA. At high OSA addition, OSA-P had a smaller specific surface area with fewer pores because octenyl succinic (OS) groups impeded the enzymatic treatment. Compared with OSA-P, the lamellar structure of P-OSA is sparser and less ordered. Owing to its pores, P-OSA was beneficial for the reaction to occur inside the granules, which was observed by Raman spectroscopy and laser confocal microscopy. At high OSA addition, the loading of P-OSA to menthone could reach 64.34 mg/g.

Research progress of glucoamylase with industrial potential

Glucoamylase is one of the most widely used enzymes in industry, but the development background and existing circumstances of industrial glucoamylase were not described by published articles. CiteSpace, a powerful tool for bibliometric, was used to analyze the past, existing circumstances, and trends of a professional field. In this study, 1820 Web-of-Science-indexed articles from 1991 to 2021 were collected and analyzed by CiteSpace. The research hotspots of industrial glucoamylase, like glucoamylase strain directional improvement, Aspergillus niger glucoamylase, glucoamylase immobilization, application of glucoamylase in ethanol production, and "customized production" of porous starch, were found by analyzing countries, institutions, authors, keywords, and references of articles. PRACTICAL APPLICATIONS: The research progress of glucoamylase with industrial potential was analyzed by CiteSpace, and a significant research direction of glucoamylase with industrial potential was found. This is helpful for academic and corporate audiences to understand the current situation of glucoamylase with industrial potential and carry out follow-up works.

New Techniques in Structural Tailoring of Starch Functionality

Inherent characteristics of native starches such as water insolubility, retrogradation and syneresis, and instability in harsh processing conditions (e.g., high temperature and shearing, low pH) limit their industrial applications. As starch properties mainly depend on starch composition and structure, structural tailoring of starch has been important for overcoming functional limitations and expanding starch applications in different fields. In this review, we first introduce the basics of starch structure, properties, and functionalities and then describe the interactions of starch with lipids, polysaccharides, and phenolics. After reviewing genetic, chemical, and enzymatic modifications of starch, we describe current progress in the areas of porous starch and starch-based nanoparticles. New techniques, such as using the CRISPR-Cas9 technique to tailor starch structures and using an emulsion-assisted approach in forming functional starch nanoparticles, are only feasible when they are established based on fundamental knowledge of starch. Expected final online publication date for the Annual Review of Food Science and Technology, Volume 13 is March 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.