New low viscous hydrophobic deep eutectic solvents in vortex-assisted liquid-liquid microextraction for the determination of phthalate esters from food-contacted plastics

A Novel DLLME Method Involving a Solidifying Hydrophobic Deep Eutectic Solvent Using Hydrophilic Deep Eutectic Solvent as the Dispersant for the Determination of Polychlorinated Biphenyls in Water Samples

This paper presents a novel dispersive liquid-liquid microextraction (DLLME) method that employs solidified hydrophobic deep eutectic solvent (DES) with hydrophilic DES acting as the dispersant. The aim is to enrich polychlorinated biphenyls (PCBs) from water samples for subsequent determination by gas chromatography-mass spectrometry. The effects of both the hydrophobic DES as the extractant and the hydrophilic DES as the dispersant were thoroughly investigated. Optimization of the key factors influencing extraction efficiency was performed, and the method was subsequently validated. Specifically, a hydrophobic DES called DES2, prepared by combining thymol and decanoic acid in a molar ratio of 3:2, was selected as the extraction solvent. Meanwhile, a hydrophilic DES named DES6, prepared from choline chloride and acetic acid in a molar ratio of 1:2, was chosen as a dispersant. Under the optimal extraction conditions, the developed method exhibited excellent linearity over the concentration range of 0.01-5.0 µg/L, low limits of detection ranging from 3.0 to 5.1 ng/L, relative standard deviations less than 4.1%, and enrichment factors between 182 and 204 for PCBs. Finally, the effectiveness of the developed method was successfully demonstrated through residue determination of PCBs in water samples.

Terpenes based hydrophobic deep eutectic solvents for dispersive liquid-liquid microextraction of aliphatic aldehydes in drinking water and alcoholic beverages

Aliphatic aldehydes are a class of organic compounds containing aldehyde groups, which are widespread, and closely related to people's daily life and health. In this work, a series of terpenes based hydrophobic deep eutectic solvents were designed and synthesized using hexafluoroisopropanol as hydrogen bond donor and menthol/thymol as hydrogen bond acceptor. Then they are used as extraction solvent in dispersive liquid-liquid microextraction for extracting and determining seven aliphatic aldehydes from drinking water and alcoholic beverage combined with high performance liquid chromatography-ultraviolet. Due to the fact that these hydrophobic deep eutectic solvents are liquid at the room temperature, a density greater than that of water, a lower viscosity (≤26.10 mPa s, 25 °C), after extraction and centrifugation, the microvolume DES-rich phase in the bottom is convenient for collection and direct analysis without further dissolution or dilution with organic solvents. Some factors affecting the extraction recovery were optimized by one-variable-at-a-time and response surface methodology. Under the optimal conditions, the enrichment factors for the seven aliphatic aldehydes were 48-56. The method had good performance: linear ranges of 1.0-200, 0.5-200, 0.2-200, 0.4-400, 1.0-400, 0.4-400 and 0.4-400 μg L-1 for seven aliphatic aldehydes (r2 ≥ 0.9949), limits of detection of 0.1-0.5 μg L-1, intra-day and inter-day precisions <4.9%. The recoveries of seven aliphatic aldehydes ranged from 76.0 to 119.0%. The proposed dispersive liquid-liquid microextraction method is simple, rapid, highly efficient, and green, which effectively reduces the amount of toxic chemical reagents used and their impact on the environment. Rapid and efficient detection of aliphatic aldehydes helps ensure a healthy diet and has great application prospects in food safety analysis.

Octadecyl-fibrous mesoporous silica nanospheres coated 96-blade thin-film microextraction for high-throughput analysis of phthalic acid esters in food and migration from food packages

A high-throughput sample pre-treatment method combined with high-performance liquid chromatography (HPLC) was developed to analyze phthalates (PAEs) in food and food contact package samples. Thin film microextraction (TFME) in 96-blade format was used to pre-treat 96 samples simultaneously. Octadecyl groups functionalized fibrous mesoporous silica nanospheres, namely C18-FMSNs, were synthesized and used as TFME coating material. The coating was fabricated by spraying a slurry of C18-FMSNs and polyacrylontrile (PAN) mixture with a commercial portable spraypen. The prepared C18-FMSNs/PAN coatings exhibited good reproducibility, repeatability and reusability. The optimized TFME conditions for PAEs consisted of extraction at pH 4.0 for 50 min, and desorption by methanol/acetonitrile (25/75, V/V) for 40 min. The pretreatment time for each sample was approximately 1.3 min. This TFME-HPLC method showed good linearity for eight PAEs within the concentration range of 0.5-1000 ng mL-1, with the coefficients higher than 0.9972. The limits of detection and quantification were 0.096-0.26 ng mL-1 and 0.32-0.86 ng mL-1, respectively. The intra-day and inter-day RSD % were below 6.6 % and 8.4 %, respectively, indicating good precision. The PAEs analysis in real samples showed that dibutyl phthalate (DBP) of 2.3 ± 0.3 ng mL-1 and di-(2-ethylhexyl) phthalate (DEHP) of 5.5 ± 0.8 ng mL-1 in boxed milk, dimethyl phthalate (DMP) of 12.6 ± 0.8 ng mL-1, DBP of 3.2 ± 0.4 ng mL-1and DEHP of 14.3 ± 0.7 ng mL-1 in the simulated water migration of plastic box, as well as DMP of 19.0 ± 0.6 ng mL-1, DBP of 25.6 ± 0.9 ng mL-1 and DEHP of 49.5 ± 2.8 ng mL-1 in the simulated ethanol migration of plastic box were determined, respectively. In addition, the detection of PAEs in all the real samples showed good recovery ranging from 85.6 to 110 % and lower RSDs % (<7.2 %).

Selective extraction of anionic and cationic dyes using tailored hydrophobic deep eutectic solvents

In this work, eight kinds of hydrophobic deep eutectic solvents (DESs), including four types of ionic and four types of non-ionic DESs, were prepared and applied in vortex-assisted liquid-liquid microextraction (LLME) technology. To explore the extraction ability of the hydrophobic DESs-based vortex-assisted LLME, four types of dyes were selected as analytes, involving anionic tartrazine (TA), amaranth (AM) and cationic phenosafranine (PF), methylene blue (MB). It turned out that the ionic and non-ionic hydrophobic DESs showed selective extraction on anionic and cationic dyes, respectively. In particular, the extraction efficiency of TA could reach 99.3 % when trioctylmethylammonium chloride-thymol ([TMAC][Thy]) was utilized as extraction agent. The partitioning efficiency of PF was up to 99.9 % by using decanoic acid-thymol ([DecA][Thy]) as extraction agent. The limits of detection (LODs) of TA and PF were 0.06 and 0.14 μg mL-1, respectively. The limits of quantification (LOQs) obtained for TA and PF were 0.20 and 0.47 μg mL-1, respectively. Besides, FT-IR and 1H NMR were utilized to investigate the extraction mechanism. The results demonstrated that the hydrogen bonding and electrostatic force were the main driving forces in the extraction process. Furthermore, through separating various anionic and cationic dyes, the selective extraction ability of [TMAC][Thy] and [DecA][Thy] were successfully verified. Hence, the feasible operation, high extraction efficiency and excellent selectivity make the developed hydrophobic DESs-based vortex-assisted LLME attractive in dyes separation.

Recent Advances in Non-Targeted Screening of Compounds in Plastic-Based/Paper-Based Food Contact Materials

Ensuring the safety of food contact materials has become a pressing concern in recent times. However, detecting hazardous compounds in such materials can be a complex task, and traditional screening methods may not be sufficient. Non-targeted screening technologies can provide comprehensive information on all detectable compounds, thereby supporting the identification, detection, and risk assessment of food contact materials. Nonetheless, the non-targeted screening of food contact materials remains a challenging issue. This paper presents a detailed review of non-targeted screening technologies relying on high-resolution mass spectrometry for plastic-based and paper-based food contact materials over the past five years. Methods of extracting, separating, concentrating, and enriching compounds, as well as migration experiments related to non-targeted screening, are examined in detail. Furthermore, instruments and devices of high-resolution mass spectrometry used in non-targeted screening technologies for food contact materials are discussed and summarized. The research findings aim to provide a theoretical basis and practical reference for the risk management of food contact materials and the development of relevant regulations and standards.

Factors Affecting the Extraction of (Poly)Phenols from Natural Resources Using Deep Eutectic Solvents Combined with Ultrasound-Assisted Extraction

Replacing conventional solvents with deep eutectic solvents (DES) has shown promising effects on the extraction yield of (poly)phenols. DES can be combined with ultrasound-assisted extraction (UAE) to further increase the extraction efficiency of (poly)phenols from natural resources compared to conventional methods. This review discusses the factors associated with DES (composition, solvent-to-sample ratio, extraction duration, and temperature) and UAE (ultrasound frequency, power, intensity, and duty cycle) methods that influence the extraction of (poly)phenols and informs future improvements required in the optimization of the extraction process. For the optimum (poly)phenol extraction from natural resources, the following parameters shall be considered: ultrasound frequency should be in the range of 20-50 kHz, ultrasound intensity in the range of 60-120 W/cm2, ultrasound duty cycle in the range of 40-80%, ultrasound duration for 10-30 minutes, and ultrasound temperature for 25-50 °C. Among the reported DES systems, choline chloride with glycerol or lactic acid, with a solvent-to-sample mass ratio of 10-30:1 shown to be effective. The solvent composition and solvent-to-sample mass ratio should be selected according to the target compound and the source material. However, the high viscosity of DES is among the major limitations. Optimizing these factors can help to increase the yield of extracted (poly)phenols and their applications.

A green extraction strategy for the detection of antioxidants in food simulants and beverages migrated from plastic packaging materials

Antioxidants, widely utilized in the food packaging field, have a risk of migrating into foodstuffs and eventually entering the human body. In this work, a novel method was established for green extraction and determination of antioxidants in food simulants migrated from plastic packaging materials. It was found that the antioxidants could be extracted directly from food simulants by in-situ formation of hydrophobic deep eutectic solvents with low toxic medium-chain fatty alcohols. Under the optimal conditions, the limit of detection was 0.15 to 0.25 µg/L, and the limit of quantification was 0.5 to 1.0 µg/L for the antioxidants. The extraction reaches equilibrium in 2 min. Importantly, butylated hydroxytoluene was detected in two types of the surveyed food contact materials. The established method shows high sensitivity, high enrichment factor, and strong anti-interference ability, and can be used for the separation and enrichment of ultra-trace antioxidants in foodstuffs.

Hydrophobic Deep Eutectic Solvents as Greener Substitutes for Conventional Extraction Media: Examples and Techniques

Deep eutectic solvents (DESs) are multicomponent designer solvents that exist as stable liquids over a wide range of temperatures. Over the last two decades, research has been dedicated to developing noncytotoxic, biodegradable, and biocompatible DESs to replace commercially available toxic organic solvents. However, most of the DESs formulated until now are hydrophilic and disintegrate via dissolution on coming in contact with the aqueous phase. To expand the repertoire of DESs as green solvents, hydrophobic DESs (HDESs) were prepared as an alternative. The hydrophobicity is a consequence of the constituents and can be modified according to the nature of the application. Due to their immiscibility, HDESs induce phase segregation in an aqueous solution and thus can be utilized as an extracting medium for a multitude of compounds. Here, we review literature reporting the usage of HDESs for the extraction of various organic compounds and metal ions from aqueous solutions and absorption of gases like CO₂. We also discuss the techniques currently employed in the extraction processes. We have delineated the limitations that might reduce the applicability of these solvents and also discussed examples of how DESs behave as reaction media. Our review presents the possibility of HDESs being used as substitutes for conventional organic solvents.

Recent advances and applications of magnetic covalent organic frameworks in food analysis

Recently, covalent organic frameworks (COFs) have been widely used to prepare magnetic adsorbents for food analysis due to their highly tunable porosity, large specific surface area, excellent chemical and thermal stability and large delocalised π-electron system. This review summarises the main types and preparation methods of magnetic COFs and their applications in food analysis for the detection of pesticide residues, veterinary drugs, endocrine-disrupting phenols and estrogens, plasticisers and other food contaminants. Furthermore, challenges and future outlook in the development of magnetic COFs for food analysis are discussed.

Covalent triazine-based frameworks for efficient solid-phase microextraction of phthalic acid esters from food-contacted plastics

Owing to various health threats associated with phthalic acid esters (PAEs), this category of endocrine-disrupting compounds has attracted more and more public scrutiny. However, the efficient preconcentration of PAEs from complex food-contacted plastics still remains challenging. Herein, three covalent triazine-based frameworks (CTFs) were constructed by facile Friedel-Crafts reactions of cyanuric chloride (CC), with triptycene (TPC), fluorene (FL) and 1,3,5-triphenylbenzene (TPB), respectively. Three CTFs were then employed as solid-phase microextraction (SPME) coatings for the extraction of PAEs. Benefiting from the large surface area and high pore volume, the newly-synthesized CC-TPC based SPME method exhibited large enrichment factors (978-2210), low limits of detection (0.027-0.10 ng g ^- 1), satisfactory linear ranges (0.09-20 ng g ^- 1), acceptable repeatabilities (4.3-9.6%) and high relative recoveries (92.0-104.6%).

A Critical Review of Emerging Hydrophobic Deep Eutectic Solvents' Applications in Food Chemistry: Trends and Opportunities

Due to their low cost, biodegradability, and ease of preparation, deep eutectic solvents (DESs) are considered promising green alternatives to conventional solvents, as exploiting green solvents has been a research focus for achieving sustainable development goals. Most DESs in published studies are hydrophilic. On the other hand, the DES's hydrophilicity restricts its practical applicability to just polar molecules, which is a vital disadvantage to this extractant. Hydrophobic DES (HDES) has been developed as a new extractant adept at extracting nonpolar inorganic and organic compounds from aqueous systems. Although there has been little research on HDESs (HDES publications account for <10% of DES), specific intriguing applications have been discovered, requiring investigation and comparisons. As a result, this review covers the applications of emerging HDES in detecting pesticide residues, food additives, contaminants in food packaging, heavy metals, separation and extraction processes in food. According to the available literature, HDESs have the potential to overcome the limitations of hydrophilic DESs and be used in a broader range of applications in food with greater efficiency, which has received little attention. HDES is expected to substitute a lot of harmful organic extractants used for analytical reasons (food chemistry) in the future. Besides, the limitations of HDES were reviewed, and future studies were provided. This will serve as a reference for green chemistry advocates and practitioners in food science who want to minimize pollution and improve efficiency and benefit from the further development of HDESs.

Application of a phosphonium-based ionic liquid for reactive textile dye removal: Extraction study and toxicological evaluation

Textile dyeing processes are known for their negative environmental impacts due to the production of aqueous effluents containing toxic dyes. Therefore, new wastewater treatment processes need to be developed to treat such effluents, including Liquid-Liquid Extraction (LLE) process using Ionic Liquids (IL). This work aimed to evaluate the application of the hydrophobic IL trihexyltetradecylphosphonium decanoate to extract black, navy, and royal reactive dyes from water and evaluate the toxicological aspects of the resulting water stream. We investigated the effect of selected parameters, such as pH (2-12), temperature (20-50 °C), salt effects, dye concentration (0.5-50 mg/L), and phase volume ratio (900-9000) on the dye extraction. The results showed extraction yields as high as 97% for the three dyes and an extraction capacity of approximately 300 mg/g for black and navy dyes and 400 mg/g for royal. The toxicity tests involved Lactuca sativa, Triticum aestivium L, and Daphnia magna as bioindicators. The difference between the toxicity of the dye solutions before and after extraction was not statistically significant when L. sativa and Triticum aestivum L were used as bioindicators. However, the extracted solution showed increased toxicity towards D. magna due to traces of IL. Overall, the IL has a high extraction capacity for the black, navy, and royal dyes. Nevertheless, further studies on LLE associated with other processes must be carried out to reduce the risk linked to the toxicity of IL transferred to the water.

Hydrolysis of triglycerides in milk to provide fatty acids as precursors in the formation of deep eutectic solvent for extraction of polycyclic aromatic hydrocarbons

A microextraction pretreatment for powdered milk analysis, relying on the formation of a natural deep eutectic solvent is proposed. It relies on the in situ hydrolysis of milk fats (triglycerides) which yields fatty acids as precursors in the formation of the natural deep eutectic solvent. As a proof-of-concept, the innovation was applied to the determination of thirteen polycyclic aromatic hydrocarbons in powdered milk samples by HPLC with fluorometric detection. The alkaline hydrolysis of milk triglycerides minimized sample matrices interference through removal of proteins and fats, and led to formation of natural deep eutectic solvent precursors (fatty acids) directly from the sample components. Addition of only one precursor (terpenoid) was then required. Menthol and thymol (natural terpenoids) were investigated as deep eutectic solvent precursors for microextraction of polycyclic aromatic hydrocarbons. Under the selected experimental conditions, limits of detection were estimated within the 0.002-0.09 μg kg^-1 range. The innovation provided satisfactory (70-91%) extraction of hydrophobic analytes from complex powdered milk matrices containing hydrophobic components (triglycerides) without the need for hazardous organic solvents. The RSD values were <5.2%.

Deep Eutectic Solvents as Promising Green Solvents in Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Droplet: Recent Applications, Challenges and Future Perspectives

Deep eutectic solvents (DESs) have recently attracted attention as a promising green alternative to conventional hazardous solvents by virtue of their simple preparation, low cost, and biodegradability. Even though the application of DESs in analytical chemistry is still in its early stages, the number of publications on this topic is growing. Analytical procedures applying dispersive liquid-liquid microextraction based on the solidification of floating organic droplets (DLLME-SFOD) are among the more appealing approaches where DESs have been found to be applicable. Herein, we provide a summary of the articles that are concerned with the application of DESs in the DLLME-SFOD of target analytes from diverse samples to provide up-to-date knowledge in this area. In addition, the major variables influencing enrichment efficiency and the microextraction mechanism are fully investigated and explained. Finally, the challenges and future perspectives of applying DESs in DLLME-SFOD are thoroughly discussed and are critically analyzed.

Comprehensive Insight from Phthalates Occurrence: From Health Outcomes to Emerging Analytical Approaches

Phthalates are a group of chemicals used in a multitude of important industrial products (e.g., medical devices, children's toys, and food packages), mainly as plasticizers to improve mechanical properties such as flexibility, transparency, durability, and longevity of polyvinyl chloride (PVC). The wide occurrence of phthalates in many consumer products, including foods (e.g., bottled water, soft drinks, wine, milk, and meat) brings that most people are exposed to phthalates every day, which raises some concerns. Adverse health outcomes from phthalates exposure have been associated with endocrine disruption, deformities in the human reproductive system, increased risk of preterm birth, carcinogen exposure, among others. Apprehension related to the health risks and ubiquitous incidence of phthalates in foods inspires the development of reliable analytical approaches that allow their detection and quantification at trace levels. The purpose of the current review is to provide information related to the presence of phthalates in the food chain, highlighting the health risks associated with their exposure. Moreover, an overview of emerging extraction procedures and high-resolution analytical approaches for a comprehensive quantification of phthalates is presented.

A simple and green ultrasound liquid-liquid microextraction method based on low viscous hydrophobic deep eutectic solvent for the preconcentration and separation of selenium in water and food samples prior to HG-AAS detection

A simple and green ultrasound liquid-liquid microextraction method based on low viscous hydrophobic deep eutectic solvent (ULLME-LV-HDES) was proposed for the preconcentration and separation of selenium prior to HG-AAS detection. Six different DESs were prepared for the extraction of selenium. Quercetin was used complexing agent for Se(IV) ions. Various analytical parameters such as pH, quercetin amount, DES type and its volume, sonication time, sample volume were optimized. Tolerance limits of anion, cation and transition metal ions were studied. Preconcentration and enhancement factor were found 62.5 and 121. Under the optimum conditions, limit of detection was found 0.25 ng L^-1 with calibration range of 0.8-120 ng L^-1. Relative standard deviation was found 3.2%. The accuracy of the method was confirmed with certified reference materials (NIST 1567a Wheat flour and NIST 1548a Typical diet). Finally, the developed method was successfully applied to food and water samples.

Novel recyclable acidic hydrophobic deep eutectic solvents for highly efficient extraction of calcium dobesilate in water and urine samples

Deep eutectic solvents (DESs) have been considered to be one of the most promising green alternatives of conventional volatile solvents for liquid-liquid separation. However, acidic hydrophobic DESs have been less studied although they are of great importance for the extraction of compounds which are unstable in alkaline conditions. In this study, a novel family of acidic hydrophobic deep eutectic solvents was designed and prepared from methyl trioctyl ammonium chloride and a series of haloacetic acids. For the first time, the obtained DESs were used for extraction and determination of calcium dobesilate, which is an extensively used medicine for treating vascular diseases, but it can be easily oxidized under alkaline and neutral conditions. The factors influencing extraction process including pH, temperature, extract time, inorganic salts and organic coexistence were systematically investigated. It is found that these DESs exhibited outstanding extraction performance towards calcium dobesilate. The extraction equilibrium time was only 3 min in a wide range of pH (1.2-9.2) at room temperature and the extraction capacity was up to 504 mg/g. The detection limit of calcium dobesilate extracting from water samples was 0.05 μg/L and the limit of quantification was 0.5 μg/L. A variety of inorganic salts with the concentration up to 1.0 mol/L and common coexisting organic compounds, such as glucose and starch, with the concentration more than 1000 times higher than the target analyte had no obvious impact on the extraction efficiency. The relative recovery for real samples ranged from 93.2% to 108.6%. Furthermore, the DESs could be recycled and regenerated through back extraction. After fifteen cycles, the extraction efficiency was still up to 99%. Finally, the extraction and back extraction mechanism was discussed in detail.

Extraction of phthalic acid esters from soft drinks and infusions by dispersive liquid-liquid microextraction based on the solidification of the floating organic drop using a menthol-based natural deep eutectic solvent

In this work, a natural deep eutectic solvent (NADES) consisting of L-menthol and acetic acid in a 1:1 molar ratio has been applied as extraction solvent for the dispersive liquid-liquid microextraction based on the solidification of the floating organic drop (DLLME-SFO) of a group of nine phthalic acid esters (dipropyl phthalate, DPP; butyl benzyl phthalate, BBP; dibutyl phthalate, DBP; dicyclohexyl phthalate, DCHP; diisopentyl phthalate, DIPP; di-n-pentyl phthalate, DNPP; di(2-ethylhexyl) phthalate, DEHP; diisononyl phthalate, DINP; and diisodecyl phthalate, DIDP) from three common infusions (camomile, pennyroyal mint, and linden teas) and three soft drinks (green tea, tonic, and lime and lemon drink), using dihexyl phthalate (DHP) and di-n-octyl phthalate (DNOP) as internal standards. After the DLLME-SFO procedure, analyses were carried out by high-performance liquid chromatography with UV detection. Method calibration showed good linearity for all the analytes and matrices, with determination coefficients (R²) higher than 0.9910. Relative recovery values were between 71 and 125 %, with relative standard deviation values in the range 1-22 % for the six types of samples, while the limits of quantification of the method were in the range 4.3-51.1 µg/L for infusions and in the range 3.5-33.3 µg/L for soft drinks. Several samples purchased in different local supermarkets were analysed, finding DPP, DBP, DIPP, DEHP and DINP, although only DPP, DBP and DEHP could be quantified in some of them.

Air-assisted liquid-liquid microextraction based on the solidification of floating deep eutectic solvents for the simultaneous determination of bisphenols and polycyclic aromatic hydrocarbons in tea infusions via HPLC

Deep eutectic solvents (DESs) are a new class of green "designer solvent"; its physicochemical properties can be easily tuned by adjusting DES' constituents, chemical ratio and water content. In this study, three hydrophobic DESs with low viscosity, low density, and melting points close to room temperature were designed and synthesized. Based on these DESs, an air-assisted liquid-liquid microextraction technique was developed based on the solidification of floating DESs for the simultaneous determination of bisphenols and polycyclic aromatic hydrocarbons (PAHs) via HPLC. The microextraction parameters were optimized via the Plackett-Burman design and response surface methodologies. The method shows satisfactory linearity (R² ≥ 0.9928), a low limit of detection (0.16-0.75 μg L^-1) and satisfactory precision (≤2.3%), and was successfully applied for the simultaneous determination of bisphenols and PAHs from tea infusions with satisfactory recoveries (82.0-116.6%). This method is simple, rapid, economical, environmentally compatible, dispersive solvent-frees and centrifugation-free, and has promising applications in food safety.

Microextraction Techniques with Deep Eutectic Solvents

In this review, the ever-increasing use of deep eutectic solvents (DES) in microextraction techniques will be discussed, focusing on the reasons needed to replace conventional extraction techniques with greener approaches that follow the principles of green analytical chemistry. The properties of DES will be discussed, pinpointing their exceptional performance and analytical parameters, justifying their current extensive scientific interest. Finally, a variety of applications for commonly used microextraction techniques will be reported.

Deep eutectic solvent-based liquid-phase microextraction coupled with reversed-phase high-performance liquid chromatography for determination of α-, β-, γ-, and δ-tocopherol in edible oils

For simultaneous analysis of four fat-soluble tocopherols (α-, β-, γ-, and δ-) in edible oils, an efficient and green method using deep eutectic solvent-based liquid-phase microextraction (DES-LPME) coupled with reversed-phase high-performance liquid chromatography (RP-HPLC) was developed. The DESs formed by different quaternary ammonium salts and ethanol were used as the extractants. Tetrabutylammonium chloride (TBAC)-ethanol DES at a molar ratio of 1:2 achieved the best extraction efficiency. Under the optimized conditions, the detection limits were in the range of 2.1-3.0 ng mL^-1. The intra-day and inter-day repeatability were in the ranges of 3.9-5.3% and 4.8-7.1%, respectively, and the recoveries for the real samples varied from 80.7% to 105.4%. The developed method was successfully employed for the determination of all four tocopherol homologues with an RP-HPLC system containing a COSMOSIL π-NAP column in five edible oils collected locally. Graphical abstract.

Recent Application of Deep Eutectic Solvents as Green Solvent in Dispersive Liquid-Liquid Microextraction of Trace Level Chemical Contaminants in Food and Water

As growing concerns on green, cost-effective, and time-saving chemistry analysis methods, deep eutectic solvents (DESs) are considered to be promising green alternatives to conventional solvents in dispersive liquid-liquid microextraction (DLLME) of trace level chemical contaminants in food and water, due to their biodegradability, low cost, and simple preparation. In the past few years, numerous innovative researches have focused on preconcentration of trace level chemical contaminants using DESs as extractant. In this context, this review aims to summarize the updated state-of-the-art effort dedicated to preconcentration of trace level chemical contaminants in food and water sample using DESs as extractants in DLLME. Furthermore, the major impact factors affecting the preconcentration efficiency and process mechanisms are thoroughly analyzed and discussed. Finally, prospects and challenges in application of DESs as solvents in DLLME to enrich trace level chemical contaminants are extensively elucidated and critically reviewed.

Recovery and Stabilization of Anthocyanins and Phenolic Antioxidants of Roselle (Hibiscus sabdariffa L.) with Hydrophilic Deep Eutectic Solvents

Deep eutectic solvents (DESs) have got huge interest as new green and sustainable solvents for the extraction of bioactive compounds from plants in recent decades. In the present study, we aimed to investigate the effectiveness of hydrophilic DES for the extraction of anthocyanin and polyphenol antioxidants from Roselle. A natural hydrophilic DES constituted of sodium acetate (hydrogen bond acceptor) and formic acid (hydrogen bond donor) designed to evaluate the total phenolic compound (TPC), total flavonoid (TFC), total anthocyanin (TACN), 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging and ferric reducing antioxidant power (FRAP) values of Roselle. Distilled water, 70% ethanol, and 80% methanol used as conventional solvents for comparison. The results indicated that the DES prepared in molarity ratio (SAFAm) was the most efficient. Subsequently, this prominent DES selected for the optimization and the optimum extraction conditions were 1:3.6 molarity ratio, 0% additional water, and 10 mL solvent. TPC, TFC, TACN, FRAP, and DPPH radical scavenging at the optimum point were 233.26 mg GAE/g, 10.14 mg ECE/g, 10.62 mg D3S/g, 493.45 mmol ISE/g, and 343.41 mmol TE/g, respectively. The stability tests showed that anthocyanins were more stable in SAFAm. These findings revealed that SAFAm is an effective green solvent for the extraction of polyphenols from various plants.

Hydrophobic borneol-based natural deep eutectic solvents as a green extraction media for air-assisted liquid-liquid micro-extraction of warfarin in biological samples

In the present study, a new generation of water-immiscible natural deep eutectic solvents (DESs) was synthesized using borneol as a hydrogen-bonding acceptor and decanoic acid, oleic acid, and thymol as a hydrogen-bonding donor in different molar ratios. These green hydrophobic solvents which are chemically stable in aqueous solutions were used as extraction solvents for isolation and pre-concentration of warfarin in biological samples. In this method, fine droplets of DESs were dispersed into the sample solution by using the air-assisted liquid-liquid micro-extraction method to accelerate the cloudy emulsion system formation and increase the mass transfer of the analyte to the DES-rich phase. The borneol based deep eutectic solvent is a worthy generation of the extraction solvents in the ALLME method due to low-cost and less toxicity. A Plackett-Burman design was utilized for screening the experimental parameters. The effective parameters were then optimized by Box-Behnken design (BBD). Optimized extraction conditions were pH of sample solution of 3.9, number of aspiration/dispersion cycles of 15, the volume of DES of 60 μL, and rate and time of centrifuge of 6000 rpm and 10 min, respectively. Under the optimized conditions, the developed NADES-ALLME method exhibited a wide linear range of 5-500 µg L ^- 1 for plasma and urine samples with satisfactory recoveries above 88.80%. Limit of detections (LODs) and Limit of quantifications (LOQs) of warfarin were in the ranges of 0.5-2.7 and 1.65-8.91, respectively. The enrichment factors were obtained in the range of 148-164 and precisions were lower than 5.87%. Finally, the proposed method was successfully employed for the analysis of warfarin in human urine and plasma samples.