Determination of melamine and melamine–Cu(II) complexes in milk using a DNA-Ag hydrocolloid as the sensor

Advances in Aptamer-Based Conjugate Recognition Techniques for the Detection of Small Molecules in Food

Small molecules are significant risk factors for causing food safety issues, posing serious threats to human health. Sensitive screening for hazards is beneficial for enhancing public security. However, traditional detection methods are unable to meet the requirements for the field screening of small molecules. Therefore, it is necessary to develop applicable methods with high levels of sensitivity and specificity to identify the small molecules. Aptamers are short-chain nucleic acids that can specifically bind to small molecules. By utilizing aptamers to enhance the performance of recognition technology, it is possible to achieve high selectivity and sensitivity levels when detecting small molecules. There have been several varieties of aptamer target recognition techniques developed to improve the ability to detect small molecules in recent years. This review focuses on the principles of detection platforms, classifies the conjugating methods between small molecules and aptamers, summarizes advancements in aptamer-based conjugate recognition techniques for the detection of small molecules in food, and seeks to provide emerging powerful tools in the field of point-of-care diagnostics.

Qualitative and semi-quantitative analysis of melamine in liquid milk based on surface-enhanced Raman spectroscopy

Melamine is one of the common limited contaminations in dairy products. The traditional detection method has a long period and complicated pretreatment process. The rapid detection method is the better method to solve the screening of limited contaminations. In this paper, taking melamine as the research object, the surface enhanced Raman spectrum of melamine in liquid milk were collected by portable Raman spectrometer, and melamine was qualitatively identified and semi-quantitatively analyzed by Raman characteristic peak and Raman intensity, and a simple and efficient rapid screening method for limited contaminations was developed. The limit of detection is 0.25 mg/kg. The probability of detection is 100% at 2.5 mg/kg, which is the same between the two laboratories, indicating that the semi-quantitative method has good repeatability. The method of melamine proposed in this study can meet the rapid screening requirements of limited contaminations at the maximum residue limit, and has a good application prospect.

Enhanced ultrasonic spray ionization for direct mass spectrometry analysis of aqueous solution and complex samples using a single-orifice piezoelectric atomizer

An efficient and superior soft ionization approach for direct mass spectrometry analysis of a variety of samples such as aqueous solution, raw biological sample and proteins, was developed based on commercially available piezoelectric atomizers. A single conical orifice (5 μm in diameter) was created on the atomizer, which resulted in generation of uniform fine droplets and long-duration of MS signal. The two electrodes of piezoelectric atomizer were connected to the two sides of ceramic ring which was insulated from the metallic substrate. The unique design allowed an additional high voltage input towards the spray reagents, which facilitated direct analysis of more complex samples without sample pre-treatment, such as biological samples (tomato tissue). The ionization was driven by an extremely low electrical power (3.5 V rechargeable battery) yet providing an efficient and superior soft ionization. The method displayed a better thermal and pH stability than nano electrospray ionization (nanoESI) and electrospray ionization (ESI) on direct analysis of Vitamin B and protein aqueous solutions. Quantitative analysis of Vitamin B and Rhodamine B aqueous solutions was also investigated, showing a good linearity (R² > 0.99). In addition, our results suggested that compared with ESI and nanoESI, the method not only could be used for direct analysis of intact protein, but also provide more information concerning the association between intact protein and the subunits.

Computational design and molecular modeling of the interaction of nicotinic acid hydrazide nickel-based complexes with H2S gas

The application of nickel complexes of nicotinic acid hydrazide ligand as a potential gas-sensor and adsorbent material for H₂S gas was examined using appropriate density functional theory (DFT) calculations with the ωB97XD/Gen/6-311++G(d,p)/LanL2DZ method. The FT-IR spectrum of the synthesized ligand exhibited a medium band at 3178 cm^-1 attributed to ν(NH) stretching vibrations and strong bands at 1657 and 1600 cm^-1 corresponding to the presence of ν(C[double bond, length as m-dash]O) and ν(C[double bond, length as m-dash]N) vibration modes. In the spectrum of the nickel(ii) complex, the ν(C[double bond, length as m-dash]O) and ν(C[double bond, length as m-dash]N) vibration bands experience negative shifts to 1605 cm^-1 and 1580 cm^-1, respectively, compared to the ligand. This indicates the coordination of the carbonyl oxygen and the azomethine nitrogen atoms to the Ni²⁺ ion. Thus, the sensing mechanism of the complexes indicated a short recovery time and that the work function value increases for all complexes, necessitating an excellent H₂S gas sensor material. Thus, a profound assertion was given that the complex sensor surfaces exhibited very dense stability with regards to their relevant binding energies corresponding to various existing studies.

Mercury mediated DNA-Au/Ag nanocluster ensembles to generate a gray code encoder for biocomputing

Boolean operations utilizing DNA as a platform for biocomputing have become a promising tool for next-generation bio-molecular computers. In the whole process of any binary data transmission, bit errors are unavoidable and commonly occur. Cascades of exclusive-OR (XOR) operations show the great potential to evaluate these errors by introducing a parity generator (pG) and a parity checker (pC). Herein, we constructed a DNA hybrid architecture platform employing a chemosensing ensemble of mercury-mediated DNA-Au/Ag nanoclusters (M-Au/Ag NCs) to operate unconventional pG/pC for "error detection". Taking advantage of pG/pC, the transmitted and received data is converted to secure information using a binary to gray code encoder. To the best of our knowledge, this is the first molecular gray code encoder for biocomputing, which discovers an exciting avenue to protect information security through sophisticated logic circuits.

Ultrasensitive fluorometric oligonucleotide immunoassay for the simultaneous and efficient detection of two mycotoxins in agricultural products

An ultrasensitive fluorometric oligonucleotide immunoassay (UFOIA) based on a fluorometric oligonucleotide and magnetic separation was proposed for the simultaneous detection of two mycotoxins. Two kinds of magnetic nanoparticle (MNP) probes and their corresponding fluorometric oligonucleotide probes were prepared. After the immune reaction, Cy5-linked and 6-FAM-linked oligonucleotides were dissociated and applied to detect fluorescence signals simultaneously. Under optimal conditions, the detection ranges of the UFOIA were in the range of 0.654-1438.8 pg mL^-1 for zearalenone (ZEN) and 0.215-3190.1 pg mL^-1 for aflatoxin B₁ (AFB₁). The limits of detection (LODs) were 0.378 pg mL^-1 for ZEN and 0.043 pg mL^-1 for AFB₁, which showed improved sensitivities of 529-fold and 112-fold compared to those from the ELISA. The positive results of the UFOIA for authentic agricultural products were highly correlated with those from LC-MS/MS. The specificity, accuracy, precision and reliability of the UFOIA are well demonstrated. The proposed UFOIA method achieved the simultaneous and ultrasensitive detection of mycotoxins at the pg mL^-1 level, which was a considerable improvement. This study might provide an alternative approach for detecting multi-component contamination equipped with the notable highlights of ultrasensitivity, simultaneity, simplicity, high efficiency and a low background signal.

Development of an optical immunoassay based on peroxidase-mimicking Prussian blue nanoparticles and a label-free electrochemical immunosensor for accurate and sensitive quantification of milk species adulteration

In contrast to reported enzyme-based immunoassays, an enzyme-free immunoassay (optical and electrochemical) is presented here for the first time that can be used as point-of-need detection bioplatforms of bovine IgG as goat milk adulterant. In the first format, Prussian blue nanoparticles (PBNPs) were used as antibody catalytic labels in a competitive colorimetric microplate immunoassay. Absorbance measurement was performed photometrically at 450 nm. After in-depth optimization, excellent sensitivity was achieved (0.01% cow/goat volume ratio), which is 100 times lower than the limit allowed by the European legislation (EL) (1% v/v), thanks to the high catalytic activity of PBNPs compared with natural peroxidase. Moreover, the antibody-PBNPs bioconjugates showed excellent stability over 4 weeks (> 94% of the initial response) confirming the successful anchoring of the antibodies to the surface of the PBNPs. On the other hand, a label-free voltammetric immunoassay for the detection of bovine IgG was developed. The sensing principle was based on the hindrance of charge transfer between ferri-ferrocyanide redox couple and the screen-printed gold electrodes modified with bovine IgG antibody. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the step-by-step modification of the electrode surface. Under optimal conditions, this single-step electrochemical analysis achieved a high sensitivity of 0.1% (cow/goat) when monitoring the ferrocyanide oxidation at + 0.092 V (vs. Ag/AgCl) using differential pulse voltammetry (DPV). The selectivity of the developed immunoassays was evaluated for different species of milk of similar composition, and both immunoassays exhibited a selective response only to bovine IgG. Unlike conventional immunoassays, the developed enzyme-free immunoassays have many attractive features for the detection of milk adulteration, whether they are used in quality control laboratories for routine milk analysis (optical immunoassay) or at on-site checkpoints (electrochemical immunoassay) using wireless electrochemical detectors. The sensors provide high sensitivity (≤ 0.1%), excellent precision (RSD < 6%), low cost (no enzyme is required) and ease of operation, including handling of milk samples.

Background-free room temperature phosphorescence and digital image colorimetry detection of melamine by carbon nitride quantum dots in cellulose matrix with smartphone-based portable device

Carbon nitride quantum dots (CNQDs) were embedded in the sodium carboxymethyl cellulose (CMC) matrix to form CNQDs-CMC film to explore the room temperature phosphorescence (RTP) of CNQDs, which suppress the non-radiative relaxation process due to the internal hydrogen bonding interactions between CMC and CNQDs. Then, a simple, inexpensive, background-free miniature device integrating with CNQDs-CMC film and smartphone was fabricated for rapid and quantitative detection of melamine (MEL). In the present of MEL, the yellow RTP color of the CNQDs-CMC film was quenched and photographed by the smartphone. The Color Recognizer APP in the smartphone recognized the red (R) value for quantitative detection of MEL. Thus, digital image colorimetry (DIC) determination of MEL was achieved due to the visible RTP color change of CNQDs-CMC film. The smartphone-based miniature device provided a promising platform for the on-site monitoring analytes in the complex matrix including food safety, environmental screening, health monitoring, and disease prevention.

Rational design of an allosteric G-quadruplex aptamer probe for ultra-sensitive detection of melamine in milk

Efficient and accurate detection of melamine in dairy products remains a crucial yet challenging task. Herein, an allosterically modulated G-quadruplex-integrated aptamer is rationally designed with thymine-rich recognition termini for melamine binding. The detection process is facile by simply introducing the analyte into the mixture consisting of G-quadruplex aptamer probes, exonuclease III, and thioflavin T (ThT). The detection feasibility is confirmed by the polyacrylamide gel electrophoresis and fluorescence measurement results. This exonuclease III-assisted signal amplifiable approach works well in a linear range from 0.1 nM to 0.1 μM. Moreover, a detection limit as low as 83 pM is easily achieved, which is almost five orders of magnitude smaller than the maximum allowable melamine levels (about 8 μM) defined by many countries all over the world. The whole assay time for each test is no longer than 1 h. Additionally, the scheme is highly specific and satisfactory recovery rates (from 91% to 104%) are readily obtained when challenged with melamine-spiked milk samples. Therefore, the label-free, turn-on, low-cost, and time-efficient method can be used for reliable detection of melamine in an easily manipulated and ultra-sensitive manner, which may find its utilization in the field of food safety, biomedical engineering, and clinical diagnosis.

A signal-on fluorescent aptasensor by sensitized Tb3+ luminescence for detection of melamine in milk

A fluorescent aptasensor based on sensitized terbium(III) luminescence was constructed to detect melamine in milk. Tb³⁺ as the fluorescence probe can be sensitized by a guanine-rich single-stranded DNA sequence, so the complementary sequence of the polythymidine aptamer (cDNA) was modified with six consecutive guanine bases (G6). In the absence of melamine, melamine aptamer combined with cDNA to form a double helix structure, and G6 hybridized with the extended cytosine bases in the aptamer, resulting in low fluorescence intensity of Tb³⁺. In the presence of melamine, cDNA was released due to the specific recognition of melamine to the aptamer, resulting in stronger sensitized fluorescence intensity of Tb³⁺. Under the optimum conditions, the linear concentration of melamine in the milk ranged from 1.0 μg/mL to 10.0 μg/mL. This aptasensor can be used for the accurate and rapid detection of melamine in milk with a detection limit of 0.02 μg/mL, and has the advantages of high sensitivity, high efficiency, simple operation and low cost.

Structure and biomolecular recognition of nitro-BODIPY-andrographolide assembles for cancer treatment

Andrographolide (Andro) derivatives can interfere with a variety of enzymes. To increase the cancer cell absorption of Andro and to enhance the therapeutic effect of breast cancer, nitro group substituted boron dipyrromethene (NBDP) was used as the carrier of Andro. Two NBDP based assemblies (NBDP-Andro and nano NBDPAndro@PEG) were synthesized and characterized by spectroscopic methods. The affinity of Andro with NBDP enhanced the emission of NBDP. The interaction of the compounds with lipase was also studied. NBDP-Andro can bind with lipase and form new species with an emission at 360 nm. Results demonstrate that the Andro of NBDP-Andro drives the interaction of compounds with protein (BSA) and lipase by inter-molecular forces. The large red shift emission at 611 nm of the NBDPAndro@PEG is observed and discussed. Also, the MTT assay confirms that Nano NBDPAndro@PEG can enhance the inhibition rate of the proliferation of MCF-7 breast cancer cells. Therefore, nitro substituted BODIPY can be a carrier of andrographolide for cancer treatment.

Simultaneous analysis of multiple adulterants in milk using microfluidic paper-based analytical devices

This study reports the simultaneous colorimetric detection of urea, H₂O₂, and pH in milk samples using microfluidic paper-based analytical devices (μPADs) fabricated through a craft cutter printer. Paper-based devices were designed to contain three detection zones interconnected to a sampling zone by microfluidic channels. Colorimetric analysis was performed using images digitalized through an office scanner. The volumes of chromogenic and sample solutions were optimized, and the best colorimetric performance was achieved by adding 0.5 and 10 μL into detection and sampling zones, respectively. Simultaneous assays were then carried out, and the recorded responses revealed a linear behavior in the concentration ranges from 0-30.0 mmol L^-1, 0-10.0 mmol L^-1 and 6.0-9.0 for urea, H₂O₂ and pH, respectively. The limit of detection values obtained for urea and H₂O₂ were 2.4 mmol L^-1 and 0.1 mmol L^-1, respectively. For pH measurements, colorimetric assay allowed the monitoring of solution pH with a resolution of 0.25 units. The use of μPADs to detect target adulterants exhibited suitable reproducibility (RSD ≤ 6.0%), accuracy (91-102%) and no cross-reaction occurrence. When compared to reference techniques, colorimetric assays did not reveal a significant difference at a confidence level of 95%. As a proof-of-concept, the feasibility of the proposed approach was successfully demonstrated through the analysis of potential adulterants in sixteen milk samples, which were tested without any pretreatment requirement. Based on the achievements, μPADs in conjunction with colorimetric measurements emerge as a powerful tool for rapid screening of potential adulterants in milk.

A Lanthanide Complex Fluorescent Probe for the Detection of Melamine

Melamine has been illegally adulterated in dairy food because of the rich nitrogen content and stable chemical properties in recent years. Therefore, the detection of melamine is of great significance for food safety supervision and human health protection. As melamine is a weak fluorescent substance, it is difficult to detect melamine directly by fluorescence spectroscopy. In this work, we found that melamine can significantly enhance the emission of the tetracycline-europium (EuTC) complex at 616 nm. Therefore, we took EuTC complex as a fluorescent probe to detect melamine. According to the characterizations of absorption spectra, molecular electrostatic potential distribution, and the time-resolved spectra, we speculated that tetracycline and melamine may form a complex through hydrogen bonding interaction in the melamine-EuTC reaction system, causing the melamine closer approach to Eu³⁺ and reducing the non-radiative energy loss of water molecules to Eu³⁺, which significantly enhanced the fluorescence intensity of EuTC. The fluorescence intensity of EuTC complex with melamine concentration in the range of 0.5-40.0 μM shows a good linear relationship, and the correlation coefficient is 0.9951 with the detection limit of 7.85 × 10^-8M. It shows a high sensitivity for the EuTC complex as a fluorescent probe to detect melamine, which provides a supplement and extension for the detection of melamine by fluorescence spectroscopy.

A sensitive molecularly imprinted electrochemical aptasensor for highly specific determination of melamine

An electrochemical aptamer sensor based on gold nanoparticles (AuNPs) was developed for highly specific sensing of melamine (MEL), which combines molecularly imprinted polymers (MIPs) and aptamers. AuNPs were synthesized by simple reduction of sodium citrate and characterized by transmission electron microscopy. The MIP membranes with particular recognition sites were formed by electropolymerization of dopamine (DA) with polythymine (poly T) aptamers as functional monomers and melamine as template molecules. Under optimal experimental conditions, this molecularly imprinted electrochemical aptamer sensor (MIEAS) exhibits a linear relationship between 10^-12 M and 10^-4 M for detecting MEL with the detection limit of 6.7 × 10^-13 M. Moreover, this sensor displays excellent selectivity, reproducibility and stability. The milk samples analysis has confirmed the potential application of this MIEAS to quantitative detection of melamine.

Recent Advances in Microfluidic Devices for Contamination Detection and Quality Inspection of Milk

Milk is a necessity for human life. However, it is susceptible to contamination and adulteration. Microfluidic analysis devices have attracted significant attention for the high-throughput quality inspection and contaminant analysis of milk samples in recent years. This review describes the major proposals presented in the literature for the pretreatment, contaminant detection, and quality inspection of milk samples using microfluidic lab-on-a-chip and lab-on-paper platforms in the past five years. The review focuses on the sample separation, sample extraction, and sample preconcentration/amplification steps of the pretreatment process and the determination of aflatoxins, antibiotics, drugs, melamine, and foodborne pathogens in the detection process. Recent proposals for the general quality inspection of milk samples, including the viscosity and presence of adulteration, are also discussed. The review concludes with a brief perspective on the challenges facing the future development of microfluidic devices for the analysis of milk samples in the coming years.

Synthesis of biological quantum dots based on single-strand DNA and its application in melamine detection

By taking TC base-rich single-stranded DNA (ssDNA) as the raw material, a fluorescent biological quantum dots (Bio-dots) probe was prepared in one step through hydrothermal method, where its lifetime was greatly extended in comparison with Carbon quantum dots (CQDs), reaching 10.7 ns. The fluorescent detection of melamine in milk samples was realized by using the base pairing principle. Under the optimal conditions, the linear range of Bio-dots probe fluorescence sensor for melamine detection is 5-600 μM, and the detection limit is (3σ) 1.4 μM. Bio-dots can not only emit photoluminescence, but also detect target molecules as a functional recognition group. As the raw material ssDNA was basically non-toxic and there was no toxic substances participated in its synmanuscript process, this Bio-dots probe was a kind of green and environmentally-friendly photoluminescent functional material.

Food safety and quality assessment: comprehensive review and recent trends in the applications of ion mobility spectrometry (IMS)

Ion mobility spectrometry (IMS) is an analytical separation and diagnostic technique that is simple and sensitive and a rapid response and low-priced technique for detecting trace levels of chemical compounds in different matrices. Chemical agents and environmental contaminants are successfully detected by IMS and have been recently considered to employ in food safety. In addition, IMS uses stand-alone or coupled analytical diagnostic tools with chromatographic and spectroscopic methods. Scientific publications show that IMS has been applied 21% in the pharmaceutical industry, 9% in environmental studies and 13% in quality control and food safety. Nevertheless, applications of IMS in food safety and quality analysis have not been adequately explored. This review presents the IMS-related analysis and focuses on the application of IMS in food safety and quality. This review presents the important topics including detection of traces of chemicals, rate of food spoilage and freshness, food adulteration and authenticity as well as natural toxins, pesticides, herbicides, fungicides, veterinary, and growth promoter drug residues. Further, persistent organic pollutants (POPs), acrylamide, polycyclic aromatic hydrocarbon (PAH), biogenic amines, nitrosamine, furfural, phenolic compounds, heavy metals, food packaging materials, melamine, and food additives were also examined for the first time. Therefore, it is logical to predict that the application of the IMS technique in food safety, food quality, and contaminant analysis will be impressively increased in the future. HighlightsCurrent status of IMS for residues and contaminant detection in food safety.To assess all the detected contaminants in food safety, for the first time.Identified IMS-related parameters and chemical compounds in food safety control.