Terbium (III)-referenced N-doped carbon dots for ratiometric fluorescent sensing of mercury (II) in seafood

Carbon Nanomaterial Fluorescent Probes and Their Biological Applications

Fluorescent carbon nanomaterials have broadly useful chemical and photophysical attributes that are conducive to applications in biology. In this review, we focus on materials whose photophysics allow for the use of these materials in biomedical and environmental applications, with emphasis on imaging, biosensing, and cargo delivery. The review focuses primarily on graphitic carbon nanomaterials including graphene and its derivatives, carbon nanotubes, as well as carbon dots and carbon nanohoops. Recent advances in and future prospects of these fields are discussed at depth, and where appropriate, references to reviews pertaining to older literature are provided.

Design, Characterization, and Bioanalytical Applications of Green Terbium- and Nitrogen-Doped Carbon Quantum Dots as a Fluorescent Nanoprobe for Omadacycline Analysis

Terbium- and nitrogen-doped carbon quantum dots (Tb,N@CQDs) were greenly created employing microwave synthesis from plum juice with terbium nitrate. The synthesis of Tb,N@CQDs was fast (7 min) with a high quantum yield (35.44%). Tb,N@CQDs were fully characterized using transmission electron microscopy, Zeta potential analysis, fluorescence, and ultraviolet spectroscopy. Omadacycline (OMC) is a broad-spectrum tetracycline that has been recently approved by the United States Food and Drug Act (FDA) in October 2018. OMC is the first oral aminomethylcycline class antibiotic drug that was authorized for the treatment of acute skin structure infections and community-acquired pneumonia. Tb,N@CQDs exhibited emission at 440 nm after excitation at 360 nm, where their fluorescence intensity showed a reduction upon addition of OMC. The experimental parameters were further studied and optimized. The linear range was between 40 and 60 parts per billion (ppb), with (limit of quantitation) equal to 34.78 ppb. The proposed approach was validated for bioanalytical purposes using FDA guidelines and proved to be straightforward, cheap, highly sensitive, and very selective, which can be used in clinical studies. The developed approach proved to be green using some current assessment metrics and was applied successfully for the determination of OMC in human plasma, milk, and pharmaceutical formulations as well as pharmacokinetic study.

Eu-doped ZIF-8 as a ratiometric fluorescence-scattering probe for the anthrax biomarker in food samples based on competitive coordination

Bacillus anthracis spores can cause contagious anthrax, so it is significant for the public safety to detect its biomarker dipicolinic acid (DPA). Ratiometric fluorescent probes for DPA have attracted great interest because of the self-calibration effect, but they suffer from the complicated construction of dual-emitting materials. With combining fluorescence and second-order scattering (SOS), Eu-doped Zn-based metal-organic framework (ZIF-8) was here designed as a ratiometric probe for DPA, avoiding the completed construction of dual-emitting materials. Eu-doped ZIF-8 exhibited no fluorescence but possessed strong SOS ascribed to the nanostructure. However, the competitive coordination of DPA not only triggered the antenna effect of Eu3+ but also caused the decomposition of Eu-doped ZIF-8. As a consequence, the fluorescence enhancement and the SOS weakness were observed upon the addition of DPA to Eu-doped ZIF-8. And thus, a ratiometric probe for DPA was constructed based on Eu-doped ZIF-8 by integrating fluorescence with SOS. The probe as-constructed could quantify DPA in a wide range of 0.1-150 μM with a rapid response (1 min) and a low detection limit (31 nM). It also displayed excellent manifestation for the analysis of food samples with reasonable accuracy (recoveries, 90.0%-101.5%) and satisfactory precision (RSDs, 0.6%-5.7%), offering a reliable tool for the supervision of the public safety.

Carbon dots/Ruthenium(III) nanocomposites for FRET fluorescence detection and removal of mercury (II) via assembling into nanofibers

The determination and removal of mercury(II) (Hg2+) are essential for human health and environmental ecosystems. Herein, an ingenious carbon dots (CDs)-based Förster resonance energy transfer (FRET) system (N, S-CDs/Ru) was fabricated employing CDs and Ru3+ units as energy-transfer doner/acceptor pairs for visual detection and efficient removal of Hg2+. The treatment of Hg2+ induced a remarkable linear enhancement of the ratiometric fluorescence (F613 nm/F478 nm) with a detection limit (LOD) of 95 nM, along with continuous fluorescence color variations from blue to red. Given that the fluorescence color recognition and processing realized the real-time and rapid quantitation of Hg2+ by paper-based smartphone sensing platform. The mechanistic study revealed that the N/S/O-rich surface of the system enabled the Hg2+-triggered self-assembly from dots to nanofibers, combing with the active FRET process. Also, the efficient removal of Hg2+ with a removal efficiency of ∼98 % and an adsorption capacity of ∼372 mg/g was obtained. Furthermore, it was found that N, S-CDs/Ru loaded commercialized SiO2 or SBA-15 could facilitate the removal of Hg2+ with a removal efficiency over 99 % and an adsorption capacity up to ∼562 mg/g. This study provides a potential strategy for environmental monitoring and remediation.

Carbon quantum dots derived from polysaccharides: Chemistry and potential applications

Since the beginning of 21th century, nanoscience and nanotechnology become the most promising topics in various fields, attributing to the superior characters of nanoscaled structures. The conventional quantum dots are substituted with new family of luminescent nanostructures, owing to their interchanged optical properties, low-cost of fabrication, biocompatibility, non-toxicity, ecofriendly, hydrophilicity and superior chemical stability. Carbon quantum dots (CQDs) were recently investigated for their simple synthesis, bio-consonance, and different revelation applicability. Obeying the green chemistry aspects, this review demonstrates an overview about CQDs generated from polysaccharides in brief, with a background on CQDs discovery, chemical composition, green synthesis via exploitation of different polysaccharides (cellulose, starch, pectin, chitin, etc) as biocompatible/biodegradable abundant biopolymers. Additionally, applications of CQDs originated from polysaccharides in environmental purposes, textiles industry and medical activities were also presented.

Constructing an eco-friendly and ratiometric fluorescent sensor for highly efficient detection of mercury ion in environmental samples

Mercury ion (Hg2+) is a highly toxic and ubiquitous pollutant, whose effective detection has aroused widespread concern. A novel ratiometric fluorescent sensor has been designed to rapidly and efficiently detect Hg2+ based on blue/red carbon dots (CDs) with environmental friendliness. This sensor was well characterized via TEM, FTIR, XPS, UV-vis, and zeta potential analysis and displayed excellent fluorescence properties and stability. The fluorescence of blue CDs at 447 nm was significantly quenched with the addition of Hg2+ resulted from the static quenching, whereas that of red CDs at 650 nm remained invariable. A sensitive method for Hg2+ determination was constructed in the range of 0.05-7.0 nmol mL-1 with optimal conditions, and the detection limit was down to 0.028 nmol mL-1. Meanwhile, compared to other 17 metal ions, the ratiometric fluorescent sensor exhibited high selectivity for Hg2+. Furthermore, satisfied recoveries had also been obtained for measuring trace Hg2+ in practical environmental samples. This developed ratiometric fluorescent sensor provided a reliable, environmental-friendly, rapid, and efficient platform for the detection of Hg2+ in environmental applications.

Preparation and application of carbon quantum dot fluorescent probes combined with rare earth ions

Globally, antibiotic abuse, organic contamination, and excessive heavy metal ion pollution pose serious threats to human health. In this case, ratiometric fluorescent probes can eliminate the errors caused by environmental factors and provide more accurate detection results than single-emission intensity nanoprobes. Accordingly, based on the excellent biocompatibility and abundant surface functional groups of carbon quantum dots (CQDs) and the properties of large Stokes shifts and narrow emission bands of rare earth ions (RE3+), RE-CQD fluorescent probes have attracted widespread attention. Herein, firstly we review the combination of carbon quantum dots with rare earth ions (rare earth complexes) using various functionalization approaches to improve the defects of rare earth complexes and realize the functionalization of carbon quantum dots and their applications in many fields, such as biology and environmental science. In addition, we classify the methods for the synthesis of RE-CQD hybrids into three groups according to the different binding modes of the RE and CQDs, including doping, covalent grafting, and direct coordination. The excellent properties of these fluorescent probes are also briefly described. Finally, a comprehensive overview of the important applications of RE-CQD fluorescent probes in the fields of public safety sensing, chemical sensing, biomedical sensing, temperature sensing, and pH sensing is presented. In this review, the recent research progress in the field of ratiometric fluorescence sensing based on carbon quantum dots and rare earth ions is summarized and an outlook on the future development of RE-CQD fluorescent probes regarding their construction and potential applications is provided.

Silver nanoparticles deposited carbon microspheres nanozyme with enhanced peroxidase-like catalysis for colorimetric detection of Hg2+ in seafood

Novel methods for high-performance detection of Hg²⁺ in seafood are critical for ensuring food safety and human health. Herein, Ag nanoparticles (Ag NPs) were successfully deposited on carbon microspheres (CMs) to form Ag NPs-CMs nanocomplex. The proposed Ag NPs-CMs could oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidation state TMB (oxTMB) in the presence of hydrogen peroxide (H₂O₂) and had a significant UV-vis absorption peak at 652 nm. The excellent peroxidase-like activity was attributed to the increased electrostatic attraction of CMs and the catalytic synergistic effect. After adding Hg²⁺, the catalytic activity of Ag NPs-CMs was specifically enhanced and the Michaelis-Menten constant (K_m) decreased from 0.067 to 0.052 mmol/L due to the formation of Ag-Hg amalgam which produced more superoxide anions (O₂^•-) and hydroxyl radicals (•OH). The linear response ranges for Hg²⁺ were 2~833 nmol/L and 2.5~40 μmol/L, with the low detection limit of 1.10 nmol/L. This method was applied to detect Hg²⁺ in seafood with satisfactory recoveries of 95.65~106.56%. A hydrogel kit was designed for portable detection of Hg²⁺, and the response range was 0.5~5 μmol/L. This work provides a reliable method for visual Hg²⁺ detection in seafood as well as a feasible strategy for the design of high-performance nanozymes.

Synthesis and application of quantum dots in detection of environmental contaminants in food: A comprehensive review

Environmental pollutants can accumulate in the human body through the food chain, which may seriously impact human health. Therefore, it is of vital importance to develop quick, simple, accurate and sensitive (respond quickly) technologies to evaluate the concentration of environmental pollutants in food. Quantum dots (QDs)-based fluorescence detection methods have great potential to overcome the shortcomings of traditional detection methods, such as long detection time, cumbersome detection procedures, and low sensitivity. This paper reviews the types and synthesis methods of QDs with a focus on green synthesis and the research progress on rapid detection of environmental pollutants (e.g., heavy metals, pesticides, and antibiotics) in food. Metal-based QDs, carbon-based QDs, and "top-down" and "bottom-up" synthesis methods are discussed in detail. In addition, research progress of QDs in detecting different environmental pollutants in food is discussed, especially, the practical application of these methods is analyzed. Finally, current challenges and future research directions of QDs-based detection technologies are critically discussed. Hydrothermal synthesis of carbon-based QDs with low toxicity from natural materials has a promising future. Research is needed on green synthesis of QDs, direct detection without pre-processing, and simultaneous detection of multiple contaminants. Finally, how to keep the mobile sensor stable, sensitive and easy to store is a hot topic in the future.

Current Progress of Ratiometric Fluorescence Sensors Based on Carbon Dots in Foodborne Contaminant Detection

Carbon dots (CDs) are widely used in the detection of foodborne contaminants because of their biocompatibility, photoluminescence stability, and ease of chemical modification. In order to solve the interference problem of complexity in food matrices, the development of ratiometric fluorescence sensors shows great prospects. In this review, the progress of ratiometric fluorescence sensors based on CDs in foodborne contaminant detection in recent years will be summarized, focusing on the functionalized modification of CDs, the fluorescence sensing mechanism, the types of ratiometric fluorescence sensors, and the application of portable devices. In addition, the outlook on the development of the field will be presented, with the development of smartphone applications and related software helping to better enable the on-site detection of foodborne contaminants to ensure food safety and human health.

Detection of Heavy Metal Ions by Ratiometric Photoelectric Sensor

In recent years, heavy metal pollution has become increasingly serious. Heavy metals exist in an environment mainly in the form of ions (heavy metal ions, HMs). They can contaminate food, water, soil, and the atmosphere, leading to serious harm to plants and animals. With high bioavailability and nonbiodegradability, HMs can accumulate through biomagnification. Consequently, heavy metal pollution has become the cause of many fatal diseases threatening human health and ecological environment. Therefore, the accurate detection of HMs is vital and necessary. In this paper, the harm and limit standards of heavy metals were systematically summarized and the common analysis methods were overviewed and compared. Specifically, the latest research progress of ratiometric photoelectric sensor, including optical and electrical sensor, were mainly described. The research status and advantages and disadvantages of a photoelectric sensor were summarized. Furthermore, the future directions were proposed, which provided the reference for the further research and application of the ratiometric photoelectric sensor.

Carbon dots@Cu metal-organic frameworks hybrids for ratiometric fluorescent determination of pesticide thiophanate-methyl

A dual-emission fluorescent (FL) probe was constructed by coordinating Cu²⁺ of copper metal-organic frameworks (Cu-MOFs) with - COO^- group of carbon dots (CDs) for pesticide thiophanate-methyl (TM) determination. TM was recognized by organic ligands (H₂BDC and H₂BDC-NH₂) of Cu-MOFs via π stacking. Due to the higher affinity of Cu²⁺ to TM than ligands and CDs, TM chelated with Cu²⁺ to form TM-Cu complex. Thus coordination of Cu-MOFs was damaged and the ligands were released resulting in the FL intensity increase of Cu-MOFs (F₄₃₀). And also CDs were released from CDs@Cu-MOFs hybrids and electron transfer from CDs to CuMOFs was inhibited, leading to the FL intensity increase of CDs (F₆₀₀). The FL intensity ratio (F₄₃₀/F₆₀₀) showed a good linear relationship with TM concentrations of 0.0307-0.769 μmol L^-1 with a limit of detection (LOD) of ~ 3.67 nmol L^-1. The probe was successfully applied to detect TM in spiked food samples with satisfactory recoveries of 93.1-113%. Additionally, visual detection of TM was achieved according to the fluorescence color variation from blue to carmine, indicating promising application of CDs@Cu-MOFs probe.

Rapid, ultrasensitive, highly selective detection of toxic Hg(II) ions in seabass, swordfish and water samples

A novel fluorescent probe bearing triphenylamine, thiophene and thiosemicarbazide (TPA-TSC) was developed, and its distinct features were investigated. TPA-TSC demonstrated excellent selectivity towards Hg²⁺ ions, with a limit of detection (0.14 nM) among the lowest reported to date. It also exhibited a turn-off response by forming stable complex for a brief period (<30 s). Job plot analysis and high-resolution mass spectrometry (HRMS) revealed that TPA-TSC bound to Hg²⁺ with a 2:1 stoichiometry in an aqueous environment, remarkably the probe successfully detected Hg²⁺ ions in seabass, swordfish and different samples of water. In all, TPA-TSC offers a promising method for accurately determining the quality of seafood and water samples polluted with Hg²⁺.

Microwave-assisted synthesis of nitrogen-doped carbon dots using prickly pear as the carbon source and its application as a highly selective sensor for Cr(VI) and as a patterning agent

Preparation of water-dispersible carbon dots from inexpensive natural carbon precursors and its application for purposes such as sensing, bio-imaging and patterning agents is showing growing interest in recent years. In this study, we have reported the preparation of nitrogen-doped carbon dots (N-CDs) using prickly pear as the carbon source and m-xylylenediamine as the nitrogen source using a one-step microwave-assisted synthetic process. The N-CDs prepared were characterized on the basis of elemental analysis, XPS, powder-XRD, FT-IR, Raman, TEM, UV-vis and fluorescence spectroscopy. Doping of nitrogen in the N-CDs made them highly fluorescent and the study on their ion-recognition property revealed that they detect highly toxic Cr(VI) with high selectivity and sensitivity (LOD, 0.04 μM) and without interference from the other ions used in this study. By immobilizing these N-CDs onto filter paper, sensor strips were prepared for on-site monitoring/field applications and they were successfully used for the detection of Cr(VI) in water. Detailed spectral analysis revealed that the mechanism of Cr(VI) sensing involved a phenomenon called the "inner filter effect" and analysis of the fluorescence lifetime data suggested the "static quenching" of fluorescence intensity. These N-CDs were used to prepare fluorescent carbon ink and were successfully used as patterning agents.

Carbon dots-magnetic nanocomposites for the detection and removal of Hg2

The dual functional detection and removal of heavy ion metals by carbon dots has become an urgent matter of concern. Here, a unique fluorescent carbon dot-magnetic nanocomposite (Fe₃O₄/CDs) was prepared by hydrothermal methods for sensitive detection of Hg²⁺. The Fe₃O₄/CDs serve as fluorescent probes with higher selectivity and sensitivity for Hg²⁺, with the lowest detectable limit of 0.3 nM. Hg²⁺ statically quenched the blue emission of Fe₃O₄/CDs, which can be restored in the presence of saturated EDTA solution. The utilization of Fe₃O₄/CDs was fulfilled by recovering their emission conveniently. The recovery of Hg²⁺ in Chagan Lake water, tap water and drinks was calculated at 96.5 ~ 108.8%, which demonstrates the feasibility of the Fe₃O₄/CDs sensing system in natural samples. Notably, the Fe₃O₄/CDs can drive the effective removal of Hg²⁺ from samples, which is of outstanding significance as a promising probe in environmental monitoring.

Synthesis of biological quantum dots based on single-strand DNA and its application in melamine detection

By taking TC base-rich single-stranded DNA (ssDNA) as the raw material, a fluorescent biological quantum dots (Bio-dots) probe was prepared in one step through hydrothermal method, where its lifetime was greatly extended in comparison with Carbon quantum dots (CQDs), reaching 10.7 ns. The fluorescent detection of melamine in milk samples was realized by using the base pairing principle. Under the optimal conditions, the linear range of Bio-dots probe fluorescence sensor for melamine detection is 5-600 μM, and the detection limit is (3σ) 1.4 μM. Bio-dots can not only emit photoluminescence, but also detect target molecules as a functional recognition group. As the raw material ssDNA was basically non-toxic and there was no toxic substances participated in its synmanuscript process, this Bio-dots probe was a kind of green and environmentally-friendly photoluminescent functional material.

On-off Fluorescent Switching of Excitation-independent Near-ultraviolet Emission Carbon Nanobelts for Ultrasensitive Detection Nimesulide in Pharmaceutical Tablet

Here, we present an excellent strategy of unmodified near-ultraviolet fluorescence nitrogen doping carbon nanobelts (NFNCBs) for detecting nimesulide (Nim). After a simple hydrothermal process of uric acid and hydroquinone in DMF solvent, NFNCBs shows the shape of corroded stalactite-like composed of nanobelts aggregates, near-ultraviolet luminescence and a narrowed full width at half maximum. This could improve/change the electronic properties and surface chemical active site, as the result of a sensitive response to Nim. By employing this sensor, the quantitative measurement displays a linear range of 2.0 nM - 100.0 μM with a lower detection limit of 0.21 nM (3σ/k) for Nim. Our work has provided a high selectivity for Nim, which may be capable for pharmaceutical sample analysis in real tablets. Furthermore, the results concerning the recoveries (96.3 - 106.2%) for real sample analysis indicate that this nanoprobe might expand a good avenue to design an effective luminescence nanoprobe for other biologically related drugs.

When rare earth meets carbon nanodots: mechanisms, applications and outlook

Rare earth (RE) elements are widely used in the luminescence and magnetic fields by virtue of their abundant 4f electron configurations. However, the overall performance and aqueous stability of single-component RE materials need to be urgently improved to satisfy the requirements for multifunctional applications. Carbon nanodots (CNDs) are excellent nanocarriers with abundant functional surface groups, excellent hydrophilicity, unique photoluminescence (PL) and tunable features. Accordingly, RE-CND hybrids combine the merits of both RE and CNDs, which dramatically enhance their overall properties such as luminescent and magnetic-optical imaging performances, leading to highly promising practical applications in the future. Nevertheless, a comprehensive review focusing on the introduction and in-depth understanding of RE-CND hybrid materials has not been reported to date. This review endeavors to summarize the recent advances of RE-CNDs, including their interaction mechanisms, general synthetic strategies and applications in fluorescence, biosensing and multi-modal biomedical imaging. Finally, we present the current challenges and the possible application perspectives of newly developed RE-CND materials. We hope this review will inspire new design ideas and valuable references in this promising field in the future.

Dansyl-modified carbon dots with dual-emission for pH sensing, Fe3+ ion detection and fluorescent ink

In this work, a multifunctional ratiometric fluorescence (FL) nanohybrid (CSCDs@DC) was synthesized from chitosan based carbon dots (CSCDs) and dansyl chloride (DC) at room temperature. The CSCDs@DC revealed strong FL intensity, great stability and excellent anti-photobleaching properties. Herein, CSCDs@DC was responsive to pH value in the range of 1.5-4.0 and exhibited color-switchable FL properties between acidic and alkaline environments. In addition, CSCDs@DC showed good selectivity and sensitivity towards Fe³⁺ ions. A good linear relationship for the Fe³⁺ ion detection was obtained in the range from 0 μM to 100 μM, with a detection limit of 1.23 μM. What's more, CSCDs@DC can be used as a fluorescent ink. It expressed superior optical properties after 3 months of storage or continuous exposure to UV light for 24 h. This study suggested that CSCDs@DC had potential in the detection of pH and metal ions, as well as showing promising application in the anti-counterfeiting field.