Graphite-like carbon nitride-laden gold nanoparticles as signal amplification label for highly sensitive lateral flow immunoassay of 17β-estradiol

Lateral flow assay for simultaneous detection of multiple mycotoxins using nanozyme to amplify signals

Co-contamination of multiple mycotoxins produces synergistic toxic effects, leading to more serious hazards. Therefore, the simple, rapid and accurate simultaneous detection of multiple mycotoxins is crucial. Herein, a three-channel aptamer-based lateral flow assay (Apt-LFA) was established for the detection of aflatoxin M1 (AFM1), aflatoxin B1 (AFB1) and ochratoxin A (OTA). The multi-channel Apt-LFA utilized gold‑iridium nanozyme to catalyze the chromogenic substrate, which effectively achieved signal amplification. Moreover, the positions and lengths of the complementary sequences were screened by changes in fluorescence intensity. After grayscale analysis, the semi-quantitative results showed that the detection limits of AFM1, AFB1 and OTA were 0.39 ng/mL, 0.36 ng/mL and 0.82 ng/mL. The recoveries of the multiplexed competitive sensors in complex matrices of real samples were 93.33%-97.01%, 95.72%-102.67%, and 106.88%-109.33%, respectively. In conclusion, the assembly principle of the three-channel Apt-LFA is simple, which can provide a new idea for the simultaneous detection of small molecule targets.

A portable smartphone detection of ctDNA using MnB2 nanozyme and paper-based analytical device

The development of point-of-care testing (POCT) for circulating tumor DNA (ctDNA) is meaningful for the non-invasive cancers screening and diagnosis, particularly in resource-limited settings. The microfluidic paper-based analytical device (μPAD) provides an ideal platform, its application in ctDNA assays remains underexplored. In this work, a multifunctional μPAD was manufactured, which can enhance the efficiency and reduce the cost of ctDNA sensing. Additionally, a smartphone-based application analysis was fabricated for convenient, portable detection and colorimetric signal readout. Moreover, the novel oxidase-like MnB2 nanozyme was introduced in the sandwiches sensing strategy, utilizing its catalytic properties to effectively generate a colorimetric signal. The use of MnB2 nanozyme in sensing application is relatively novel, and its catalytic performance and mechanism was thoroughly evaluated via experiment and density functional theory (DFT) calculations. After optimizing the detection conditions, the proposed biosensor exhibited satisfactory results. Furthermore, the method was successfully used to detect ctDNA in tumor cell lysates and peripheral blood samples from tumor-bearing mice. The results were consistent with standard qPCR method, affirming the reliability of our POCT analysis device in ctDNA detection. Thus, this work not only provides a paper-based POCT device and intelligent analysis tool for portable cancers diagnosis, but it also paves a new application path for MnB2 nanozyme in the sensing filed.

Novel litchi-like Au-Ag nanospheres driven dual-readout lateral flow immunoassay for sensitive detection of pyrimethanil

Pyrimethanil (PYR) is a fungicide that is harmful to consumers when present in foods at concentrations greater than maximum permitted residue levels. High-performance immunoprobes and dual-readout strategy may be useful for constructing sensitive lateral flow immunoassay (LFIA). Herein, the prepared litchi-like Au-Ag bimetallic nanospheres (LBNPs) exhibited high mass extinction coefficients and fluorescence quenching constants. Benefiting from LBNPs and dual-readout mode, the limits of detection of LBNPs-CM-LFIA and LBNPs-FQ-LFIA for PYR were 0.957 and 0.713 ng mL-1, which were 2.54- and 3.41-fold lower than that of gold nanoparticles-based LFIA, respectively. The limits of quantitation of LBNPs-CM-LFIA and LBNPs-FQ-LFIA were 3.740 and 1.672 ng mL-1, respectively. LBNPs-LFIA was applied to detect PYR in cucumber and grape samples with satisfactory recovery (90%-111%). LBNPs-LFIA showed good agreement with LC-MS/MS for the detection of PYR in the samples. Accordingly, this sensitive and accurate dual-readout LFIA based on LBNPs can be effectively applied for food safety.

Engineering of dual recognition functional aptamer-molecularly imprinted polymeric solid-phase microextraction for detecting of 17β-estradiol in meat samples

In this study, an enhanced selective recognition strategy was employed to construct a novel solid-phase microextraction fiber coating for the detection of 17β-estradiol, characterized by the combination of aptamer biorecognition and molecularly imprinted polymer recognition. Benefiting from the combination of molecularly imprinted and aptamer, aptamer-molecularly imprinted (Apt-MIP) fiber coating had synergistic recognition effect. The effects of pH, ion concentration, extraction time, desorption time and desorption solvent on the adsorption capacity of Apt-MIP were investigated. The adsorption of 17β-estradiol on Apt-MIP followed pseudo-second order kinetic model, and the Freundlich isotherm. The process was exothermic and thermodynamically spontaneous. Compared with polymers that only rely on imprinted recognition, non-imprinted recognition or aptamer affinity, Apt-MIP had the best recognition performance, which was 1.30-2.20 times that of these three materials. Furthermore, the adsorption capacity of Apt-MIP for 17β-estradiol was 885.36-1487.52 times than that of polyacrylate and polydimethylsiloxane/divinylbenzone commercial fiber coatings. Apt-MIP fiber coating had good stability and could be reused for more than 15 times. Apt-MIP solid-phase microextraction coupled with high-performance liquid chromatography was successfully applied to the determination of 17β-estradiol in pork, chicken, fish and shrimp samples, with satisfactory recoveries of 79.61 %-105.70 % and low limits of detection (0.03 μg/kg). This work provides new perspectives and strategies for sample pretreatment techniques based on molecular imprinting technology and improves analytical performance.

A nanoparticle-assisted signal-enhancement technique for lateral flow immunoassays

Lateral flow immunoassay (LFIA), an affordable and rapid paper-based detection technology, is employed extensively in clinical diagnosis, environmental monitoring, and food safety analysis. The COVID-19 pandemic underscored the validity and adoption of LFIA in performing large-scale clinical and public health testing. The unprecedented demand for prompt diagnostic responses and advances in nanotechnology have fueled the rise of next-generation LFIA technologies. The utilization of nanoparticles to amplify signals represents an innovative approach aimed at augmenting LFIA sensitivity. This review probes the nanoparticle-assisted amplification strategies in LFIA applications to secure low detection limits and expedited response rates. Emphasis is placed on comprehending the correlation between the physicochemical properties of nanoparticles and LFIA performance. Lastly, we shed light on the challenges and opportunities in this prolific field.

An overview of influenza A virus detection methods: from state-of-the-art of laboratories to point-of-care strategies

Influenza A virus (IAV), a common respiratory infectious pathogen, poses a significant risk to personal health and public health safety due to rapid mutation and wide host range. To better prevent and treat IAV, comprehensive measures are needed for early and rapid screening and detection of IAV. Although traditional laboratory-based techniques are accurate, they are often time-consuming and not always feasible in emergency or resource-limited areas. In contrast, emerging point-of-care strategies provide faster results but may compromise sensitivity and specificity. Here, this review critically evaluates various detection methods for IAV from established laboratory-based procedures to innovative rapid diagnosis. By analyzing the recent research progress, we aim to address significant gaps in understanding the effectiveness, practicality, and applicability of these methods in different scenarios, which could provide information for healthcare strategies, guide public health response measures, and ultimately strengthen patient care in the face of the ongoing threat of IAV. Through a detailed comparison of diagnostic models, this review can provide a reliable reference for rapid, accurate and efficient detection of IAV, and to contribute to the diagnosis, treatment, prevention, and control of IAV.

A versatile CuCo@PDA nanozyme-based aptamer-mediated lateral flow assay for highly sensitive, on-site and dual-readout detection of Aflatoxin B1

Mycotoxin contaminations in food and environment seriously harms human health. Constructing sensitive and point-of-test early-warning tools for mycotoxin determination is in high demand. In this study, a CuCo@PDA nanozyme-based aptamer-mediated lateral flow assay (Apt-LFA) has been elaborately designed for on-site and sensitive determination of mycotoxin Aflatoxin B1 (AFB1). Benefiting from the rich functional groups and excellent peroxidase-like activity, the CuCo@PDA with original dark color can be conjugated with the specific recognition probe (i.e., aptamer), generating colorimetric signal on the test lines of Apt-LFA via a competitive sensing strategy. The signal can further be amplified in-situ by catalytic chromogenic reaction. Therefore, a visual and dual-readout detection of AFB1 has been realized. The developed Apt-LFA provides a flexible detection mode for qualitative and quantitative analysis of AFB1 by naked-eyes observation or smartphone readout. The smartphone-based LFA platform shows a reliable and ultrasensitive determination of AFB1 with the limit of detection (LOD) of 2.2 pg/mL. The recoveries in the real samples are in the range of 95.11-113.77% with coefficients of variations less than 9.84%. This study provides a new approach to realize point-of-test and sensitive detection of mycotoxins in food and environment using nanozyme-based Apt-LFAs.

17β-estradiol biosensors based on different bioreceptors and their applications

17β-Estradiol (E2) is a critical sex steroid hormone, which has significant effects on the endocrine systems of both humans and animals. E2 is also believed to play neurotrophic and neuroprotective roles in the brain. Biosensors present a powerful tool to detect E2 because of their small, efficient, and flexible design. Furthermore, Biosensors can quickly and accurately obtain detection results with only a small sampling amount, which greatly meets the detection of the environment, food safety, medicine safety, and human body. This review focuses on previous studies of biosensors for detecting E2 and divides them into non-biometric sensors, enzyme biosensors, antibody biosensors, and aptamer biosensors according to different bioreceptors. The advantages, disadvantages, and design points of various bioreceptors for E2 detection are analyzed and summarized. Additionally, applications of different bioreceptors of E2 detection are presented and highlight the field of environmental monitoring, food and medicine safety, and disease detection in recent years. Finally, the development of E2 detection by biosensor is prospected.

Sensitization Strategies of Lateral Flow Immunochromatography for Gold Modified Nanomaterials in Biosensor Development

Gold nanomaterials have become very attractive nanomaterials for biomedical research due to their unique physical and chemical properties, including size dependent optical, magnetic and catalytic properties, surface plasmon resonance (SPR), biological affinity and structural suitability. The performance of biosensing and biodiagnosis can be significantly improved in sensitivity, specificity, speed, contrast, resolution and so on by utilizing multiple optical properties of different gold nanostructures. Lateral flow immunochromatographic assay (LFIA) based on gold nanoparticles (GNPs) has the advantages of simple, fast operation, stable technology, and low cost, making it one of the most widely used in vitro diagnostics (IVDs). However, the traditional colloidal gold (CG)-based LFIA can only achieve qualitative or semi-quantitative detection, and its low detection sensitivity cannot meet the current detection needs. Due to the strong dependence of the optical properties of gold nanomaterials on their shape and surface properties, gold-based nanomaterial modification has brought new possibilities to the IVDs: people have attempted to change the morphology and size of gold nanomaterials themselves or hybrid with other elements for application in LFIA. In this paper, many well-designed plasmonic gold nanostructures for further improving the sensitivity and signal output stability of LFIA have been summarized. In addition, some opportunities and challenges that gold-based LFIA may encounter at present or in the future are also mentioned in this paper. In summary, this paper will demonstrate some feasible strategies for the manufacture of potential gold-based nanobiosensors of post of care testing (POCT) for faster detection and more accurate disease diagnosis.

Highly sensitive lateral flow immunoassays based on Ag@Au nanoflowers with marine medaka (Oryzias melastigm) vitellogenin as a target analyte

In order to improve the sensitivity of lateral flow immunoassays (LFIAs) for the detection of piscine vitellogenin (Vtg), a well-established biomarker for environmental estrogens, Au coated Ag nanoflowers (Ag@Au NFs) were used as labeling probes to develop a LFIA for marine medaka Vtg. The synthesized Ag@Au NFs with good monodispersity had an average diameter of 44.1 nm and absorbance peak of 524 nm. When the concentration of goat anti-mouse IgG and anti-Vtg polyclonal antibody (anti-Vtg PAbs) were 1.3 and 0.4 mg/mL, respectively, the detection range of the LFIA was 0.19-25 ng/mL, and the visual detection limit was 0.1 ng/mL, which was approximately 80 times lower than that of LFIAs based on other nanoparticles (Au NPs, Ag NPs, Au NFs, and FM). After evaluation of its specificity and robustness, the usefulness of Ag@Au NFs labeled LFIA was validated by measuring Vtg induction in the plasma of marine medaka exposed to bisphenol A, a weak estrogenic chemical. This highly sensitive lateral flow immunoassay could detect Vtg biomarker within 15 min without the need of expensive and complicated instruments, and thus offered an ultrasensitive and robust on-site detection method for estrogenic activity in field environment.

Rapid generation of high-quality recombinant antibodies using an Expi293F expression system for a 17 β-estradiol immunoassay

The rapid generation of high-quality target antibodies is essential for research employing immunoassays. The use of recombinant antibody technology that relies on genetic engineering is one such means to produce high-quality antibodies. Obtaining the gene sequence information of immunoglobulin is a prerequisite for the preparation of genetically engineered antibodies. At present, many researchers have shared their amino acid sequence data for various high-performance antibodies and their related properties. In this study, we obtained the protein sequence of a variable region of a 17 β-estradiol (E₂) antibody from the Protein Data Bank (PDB) and subsequently constructed heavy (H) and light (L) chain expression vectors through codon optimization. The transient expression, purification, and performance identification of the immunoglobulin G (IgG), antigen-binding fragment (Fab), and single-chain variable fragment (scFv) antibodies were carried out, respectively. The effects of the different expression vectors on the expression yield of the IgG antibody were further compared. Among them, the expression yield based on the pTT5 vector was the highest, reaching 27 mg/L. Based on the expressed IgG and Fab antibodies, an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) standard curve of E₂ was constructed, and the half-maximal inhibitory concentrations (IC₅₀) for these two antibodies were determined to be 0.129 ng/mL and 0.188 ng/mL, respectively. In addition, an immunochromatographic assay (ICA) based on the IgG antibody was constructed with an IC₅₀ of 3.7 ng/mL. Therefore, in featuring the advantages of simplicity, high efficiency, rapid obtainment, and high titer yield, we propose the system for the rapid generation of high-quality recombinant antibodies by reusing the published antibody information and show that it has good implementation prospects in improving upon existing immunoassay techniques.

Antibody conjugated Au/Ir@Cu/Zn-MOF probe for bacterial lateral flow immunoassay and precise synergistic antibacterial treatment

Staphylococcus aureus is one of the most prevalent threats to public health. Rapid detection with high sensitivity and targeted killing is crucial to curb its spread. Herein, a metal-bearing nanocomposite, consisting of a bimetallic nanoparticle and a metal-organic framework (Au/Ir@Cu/Zn-MOF) was constructed. Upon conjugation with anti-S. aureus antibody, this nanocomposite (Ab-Au/Ir@Cu/Zn-MOF) was exploited for its dual functions, i.e. as a reporting probe in a lateral flow immunoassay and a high efficiency antibacterial reagent. Benefiting from the enrichment of Au/Ir NPs by the Cu/Zn-MOF, the Au/Ir@Cu/Zn-MOF-based lateral flow immunoassay sensor exhibited a visual limit of detection of 10³ CFU/mL, which was100 times more sensitive than Au/Ir-based sensor. Moreover, the Ab-Au/Ir@Cu/Zn-MOF probe possessed synergistic photothermal-chemodynamic bactericidal effect that specifically targeted against S. aureus. Under a co-treatment by H₂O₂ (0.4 mM) and 808 nm near infrared irradiation (1 W/cm², 5 min), complete sterilization of 5 × 10⁵-10⁶ CFU/mL S. aureus was achieved at a nanocomposite concentration as low as 6.25 μg/mL. The superior antibacterial efficiency was attributable to the three-fold properties of the Ab-Au/Ir@Cu/Zn-MOF probe: (1) enhanced multi-enzyme mimicking activities that promote reactive oxygen species generation, (2) high photothermal activity (efficiency of 53.70%), and (3) bacteria targeting ability via the antibody coating. By changing the antibody, this nanocomposite can be tailored to target a wide range of bacteria species, for detection and for precise antibacterial treatment.

Multiplex immunochromatographic platform based on crystal violet tag for simultaneous detection of streptomycin and chloramphenicol

Antibiotic abuse has caused serious health risks for human beings for long. To address the problem, novel and facile detection techniques are highly desired. Here, an effective multiplex immunochromatographic platform (MICP) with synthesis-free and cost-effective merits is established for simultaneous detection of antibiotics on a single immunochromatographic assay (ICA) strip. Adopting crystal violet (CV) as a signal tag for multiplex ICA allows for direct coupling with multiple antibodies in several minutes. By combining CV and ICA perfectly, this convenient strategy offers improvements in convenience, speed, flexibility, and portability, eventually ensuring the optimized effectiveness of this approach. As a result, the established platform is successfully used to detect streptomycin (STR) and chloramphenicol (CAP) with visual detection mode, and the obtained total recoveries of milk and honey real samples changed from 83.82 to 113.38% with total RSD values of 0.48 to 4.15%.

An electrochemiluminescence sensor for sensitive detection of malathion based on g-C3N4-CdTe composite nanomaterials

A self-enhanced electrochemical luminescence (ECL) composite material g-C₃N₄-CdTe QDs was prepared. The combination of g-C₃N₄ and CdTe QDs can amplify the ECL signal and improve the stability. Based on this discovery, g-C₃N₄-CdTe QDs and acetylcholine esterase (AChE) were used to construct an ECL sensor for organophosphorus pesticides (OP) detection. The sensor showed a strong initial ECL signal in PBS containing S₂O₈^2-. It is because that g-C₃N₄ not only acts as a co-reaction promoter to amplify the ECL signal of the CdTe QDs/S₂O₈^2- system but also acts as a carrier with large specific surface area to adsorb more CdTe QDs and improve the sensitivity of the sensor. The reaction of AChE and acetylthiocholine (ATCl) was hindered by organophosphorus pesticides (OPs). The ECL signal was enhanced by the addition of OPs, and a linear relationship was displayed between the increasing value and the concentration of malathion. A good linear range from 2.52 × 10^-13 to 2.52 × 10^-8 mol L^-1 was obtained and the limit of detection was 8.4 × 10^-14 mol L^-1 under optimized experimental conditions. The results indicated that the sensor had promising applications for the detection of OPs in vegetable samples.

Self-powered photoelectrochemical aptasensor based on AgInS2@Co/Ni-UiO-66@CDs photoelectrode for estradiosl detection

A self-powered photoelectrochemical (PEC) aptasensor was constructed to sensitively detect 17β-estradiol (E₂). Firstly, a reasonable AgInS₂@Co/Ni-UiO-66@Carbon Nanodots (CDs) photoelectrode with excellent photoelectrochemical performance was built by a simple two-step preparation method. The Co and Ni doping markedly improved the activity of UiO-66; the matched energy level of AgInS₂ and Co/Ni-UiO-66 promoted the separation of electron-hole pairs, and the coupling of CDs further enhanced the conductivity and light utilization. Therefore, a steady anode-photocurrent signal output was obtained in 0.0 V bias voltage, providing a reliable photoelectric translating platform for assembling a self-powered PEC aptasensor. The E₂-aptamer was adopted as a recognition unit to enhance the selectivity and sensitivity of the proposed aptasensor. The specific recognition reaction between E₂ and aptamer administering to a raised photocurrent signal and the concentration of E₂ was quantified by counting the fluctuation of the anode-photocurrent signal. The linear response range of the PEC aptasensor was 1.0 × 10^-5-10 nmol/L, and the detection limit (S/N = 3) was lower than 3.0 fmol/L under optimal conditions. The fabricated aptasensor exhibited admirable selectivity, high sensitivity, rapid response, and wide linear range, demonstrating an extensive application prospect for environmental endocrine disruptor detection.

Split aptamer regulated CRISPR/Cas12a biosensor for 17β-estradiol through a gap-enhanced Raman tags based lateral flow strategy

It is significant to exploit the full potential of CRISPR/Cas based biosensor for non-nucleic-acid targets. Here, we developed a split aptamer regulated CRISPR/Cas12a and gap-enhanced Raman tags based lateral flow biosensor for small-molecule target, 17β-estradiol. In this assay, one split aptamer of 17β-estradiol was designed to complement with crRNA of Cas12a so that the trans-cleavage ability of CRISPR/Cas12a can be regulated by the competitive binding of 17β-estradiol and split aptamers. Through integration of the signal amplification ability of CRISPR/Cas12a and the ultra-sensitive gap-enhanced Raman tags based lateral flow assay, a visible-SERS dual mode determination of 17β-estradiol can be established. 17β-estradiol can be visibly recognized as low as 10 pM and accurately quantified with a detection limit of 180 fM by SERS signals, which is at least 10³-fold lower than that of the previous immunoassay lateral flow strategies. Our assay provides a novel perspective to develop split aptamer regulated CRISPR/Cas12a coupling with SERS lateral flow strips for ultrasensitive and easy-to-use non-nucleic-acid targets detection.

Interaction of Nucleic Acids with Metal-Organic Framework Nanosheets by Fluorescence Spectroscopy and Molecular Dynamics Simulations

The integration of nanomaterials and nucleic acids has attracted great attention in various research fields, especially biomedical applications. Designing two-dimensional nanomaterials and studying the mechanism of their interaction with nucleic acids are still attractive tasks. Herein, we designed and prepared a class of ultrathin two-dimensional metal-organic framework (MOF) nanosheets, named Zr-BTB MOF nanosheets, composed of Zr-O clusters and 1,3,5-benzenetribenzoate by a bottom-up synthesis strategy. The Zr-BTB MOF nanosheets possessed inherent excellent performance such as a high specific surface area, porosity, and biocompatibility. In addition, we clarified the interaction difference between the Zr-BTB MOF nanosheets and fluorophore-labeled double-stranded DNA and single-stranded DNA via molecular dynamics simulations and fluorescence measurement. Through molecular dynamics simulations, specific interactions between DNA and nanosheets such as forces, binding energies, and binding modes were deeply analyzed and clearly presented. Based on the affinity difference, the system showed the biosensing potential for target DNA detection with considerable specificity, sensitivity, and linearity. Our research results presented the Zr-BTB MOF nanosheet as a platform for nucleic acid detection, showing the potential for hybridization-based biosensing and related biological applications.

NIR persistent luminescence nanoparticles based turn-on aptasensor for autofluorescence-free determination of 17β-estradiol in milk

Consistent exposure to 17β-estradiol through drinking water and food can cause health problems. Although many simple and sensitive fluorescence sensors of 17β-estradiol have been reported, most of them are based on fluorescence quenching test mode working in visible light range, which are inferior in anti-interference ability and quantitative range. Here, we developed a near-infrared (NIR) phosphorescence aptasensor for the detection of 17β-estradiol that has no background fluorescence. The aptasensor was based on Foster resonance energy transfer (FRET) between aptamer conjugated NIR persistent luminescence nanoparticles (PLNPs-Apt) and MoS₂ nanosheets. The 17β-estradiol was quantified by the recovery of PLNPs' phosphorescence. This assay can detect 17β-estradiol in 0.5 mL samples with the LOD of 0.29 ng mL^-1 and in concentrations of more than three orders of magnitude (from 0.5 ng mL^-1 to 1.2 μg mL^-1). This aptasensor exhibited selectivity for 17β-estradiol and was applicable in complex milk samples.

Tailoring noble metal nanoparticle designs to enable sensitive lateral flow immunoassay

Lateral flow immunoassay (LFIA) with gold nanoparticles (AuNPs) as signal reporters is a popular point-of-care diagnostic technique. However, given the weak absorbance of traditional 20-40 nm spherical AuNPs, their sensitivity is low, which greatly limits the wide application of AuNP-based LFIA. With the rapid advances in materials science and nanotechnology, the synthesis of noble metal nanoparticles (NMNPs) has enhanced physicochemical properties such as optical, plasmonic, catalytic, and multifunctional activity by simply engineering their physical parameters, including the size, shape, composition, and external structure. Using these engineered NMNPs as an alternative to traditional AuNPs, the sensitivity of LFIA has been significantly improved, thereby greatly expanding the working range and application scenarios of LFIA, particularly in trace analysis. Therefore, in this review, we will focus on the design of engineered NMNPs and their demonstration in improving LFIA. We highlight the strategies available for tailoring NMNP designs, the effect of NMNP engineering on their performance, and the working principle of each engineering design for enhancing LFIA. Finally, current challenges and future improvements in this field are briefly discussed.

Universal fluorescence nanoprobes to enhance the sensitivity of immunochromatographic assay for detection of 17β-estradiol in milk

The pollution caused by estrogens in the environment and food has received increasing attention. It is still challenging for on-site immunochromatographic assay (ICA) detection of estrogens. The performance of the prepared probes plays a decisive role in the sensitivity and stability of the ICA system. The published probes usually directly couple the detection antibody to the label, ignoring the influence of the label on the activity of the antibody. In this study, 17β-estradiol (E₂) was used as a model analyte for the ICA system. Two universal probes were constructed based on quantum dot nanobeads (QBs), recombinant protein A (SPA, from Staphylococcus aureus), and rabbit anti-mouse immunoglobulin G antibody (anti-IgG). The probes were prepared by coupling QBs with SPA, releasing anti-E₂ monoclonal antibody (mAb), and maintaining its activity. The prepared universal probes can orient recognize the Fc region of mAb and fully expose its Fab region, improving the detection sensitivity of the ICA system. The free anti-E₂ mAb and the universal probe (QBs@SPA or QBs@SPA@anti-IgG) were used as the detection antibodies and signal donors, respectively. The results show that the proposed ICA based on QBs@SPA and QBs@SPA@anti-IgG probes could detect E₂ with IC₅₀ of 8.83 and 0.93 ng/mL, respectively, within 15 min under optimal conditions. The recovery results of ICA based on QBs@SPA and QBs@SPA@anti-IgG probes showed good agreement with the findings of the high-performance liquid chromatography (HPLC) analysis for spiked samples. The developed ICA system based on universal probes was superior in terms of sensitivity, rapidity, and applicability, and held great promise for its implementation in detecting environmental and food small-molecule pollutants.

Ten Years of Lateral Flow Immunoassay Technique Applications: Trends, Challenges and Future Perspectives

The Lateral Flow Immunoassay (LFIA) is by far one of the most successful analytical platforms to perform the on-site detection of target substances. LFIA can be considered as a sort of lab-in-a-hand and, together with other point-of-need tests, has represented a paradigm shift from sample-to-lab to lab-to-sample aiming to improve decision making and turnaround time. The features of LFIAs made them a very attractive tool in clinical diagnostic where they can improve patient care by enabling more prompt diagnosis and treatment decisions. The rapidity, simplicity, relative cost-effectiveness, and the possibility to be used by nonskilled personnel contributed to the wide acceptance of LFIAs. As a consequence, from the detection of molecules, organisms, and (bio)markers for clinical purposes, the LFIA application has been rapidly extended to other fields, including food and feed safety, veterinary medicine, environmental control, and many others. This review aims to provide readers with a 10-years overview of applications, outlining the trends for the main application fields and the relative compounded annual growth rates. Moreover, future perspectives and challenges are discussed.

Development of a Lateral Flow Immunoassay (LFIA) to Screen for the Release of the Endocrine Disruptor Bisphenol A from Polymer Materials and Products

One of the most important chemicals used in the production of polymer plastics and coatings is bisphenol A. However, despite the large number of studies on the toxicity and hormonal activity of BPA, there are still open questions and thus considerable media attention regarding BPA toxicity. Hence, it is necessary to develop a sensitive, simple, cost-efficient, specific, portable, and rapid method for monitoring bisphenol A and for high sample throughput and on-site screening analysis. Lateral flow immunoassays have potential as rapid tests for on-site screening. To meet sensitivity criteria, they must be carefully optimized. A latex microparticle-based LFIA for detection of BPA was developed. The sensitivity of the assay was improved by non-contact printing of spot grids as the control and test lines with careful parameter optimization. Results of the test could be visually evaluated within 10 min with a visual cut-off of 10 µg/L (vLOD). Alternatively, photographs were taken, and image analysis performed to set up a calibration, which allowed for a calculated limit of detection (cLOD) of 0.14 µg/L. The method was validated for thermal paper samples against ELISA and LC-MS/MS as reference methods, showing good agreement with both methods.

Visual-afterglow dual-mode immunochromatographic strip for 17β-estradiol detection in milk

The continuous intake of 17β-estradiol (E2) residue from animal-derived food may pose a threat to the health of consumers, so the rapid screen and detection of E2 is very necessary. Although visual immunochromatographic strip (ICS) has played a great role in food safety control such as the screen of many food contaminants, it cannot meet the requirements for E2 detection due to the insufficient sensitivity of traditional visual ICS and the low concentration range of estrogen in food. Here, we developed a dual-mode ICS strategy to achieve rapid and highly sensitive detection of E2. Based on the visual detection mode of a competitive ICS, the afterglow detection mode working in fluorescence resonance energy transfer mechanism was introduced by using the afterglow particles (APs) as energy donor and gold nanoparticles (AuNPs) as energy acceptor. In this method, large APs of micron size with superior afterglow were applied as the test zone-fixed fluorescence signal source, thus the contradiction between migration and afterglow characteristics was skillfully resolved. In addition, a 6 W UV lamp was used as the light source to excite APs, and a smartphone was used to capture an image of 0.5 s after the UV light was turned off to effectively remove the autofluorescence from the strips and improve the signal-to-noise ratio. The limit of detection of this afterglow mode was 0.5 ng/mL, twenty times more sensitive than that of visual mode (10 ng/mL). The strategy has been successfully applied to the detection of estradiol in milk and verified by HPLC-FLD.