Rheological and textural properties of acid-induced soybean protein isolate gel in the presence of soybean protein isolate hydrolysates or their glycosylated products

Enzymatic hydrolysis pretreatment combined with glycosylation for soybean protein isolate applying in dual-protein yogurt

This research investigated the viability of replacing milk protein with glycosylated soybean protein isolate (SPI) treated with different enzymatic hydrolysis times (0, 10, 20, 30, 40, and 50 min) in yogurt. The results showed that enzymatic hydrolysis pretreatment combined with glycosylation for SPI exhibited elevated grafting and solubility. Additionally, the high solubility of SPI (94.77 %) at 40 min facilitates the preparation of dual-protein yogurt (DPY). Compared to ESPI0-G, DPY that incorporates ESPI40-G through partial substitution of milk protein is capable of forming a denser and more stable gel matrix. Especially, the syneresis of DPY40 was reduced by 7.61 % compared to DPY0, which more closely approximates the texture properties of traditional yogurt. Meanwhile, glycosylated SPI treated with enzymatic hydrolysis can effectively degrade the beany flavor and slightly bitter taste in DPY. This study could provide a solid theoretical basis for the broader application and industrialization of plant-based yogurt.

Gelling ability and gel structure of soy protein isolate influenced by heating in the presence of various acids

This study investigated the influence of acids on gelation of soy protein isolate (SPI) under heating. Specifically, the SPI solution was acidified to pH 2.5 using hydrochloric acid (HA), acetic acid (AA), tartaric acid (TA) and citric acid (CA), respectively, and then heated at 85 °C. It was found that the SPI gel with the anisotropic structure was formed, which suggested that the gel resulted from the organized arrangement of the SPI fibril. Subsequently, it was confirmed by several techniques such as atomic force microscopy that the above acidic-thermal treatment induced fibrillation of SPI. Furthermore, the ability of these acids to promote gelation and fibrillation of SPI was in the order of CA > TA > HA > AA. In summary, these results suggested that heating at pH 2.5 resulted in SPI fibrillation, thus promoting SPI gelation, and the acidity regulator type had a profound effect.

Formation of thermal-induced microgels from soy protein hydrolysates: Effects of selective proteolysis on glycinin/β-conglycinin

This study explored the impact of selective proteolysis on the formation of thermally induced soy protein microgels. Glycinin hydrolysate (GH) and β-conglycinin hydrolysate (CH) were obtained by subjecting soy protein isolate to selective proteolysis for different hydrolysis time (10-90 min), as confirmed by SDS-PAGE. In the early stages of hydrolysis, free sulfhydryl, surface hydrophobicity, storage modulus (G') and loss modulus (G″) of GH and CH increased, which enhanced their gelling potential. However, as hydrolysis time increased, the gel properties of the hydrolysates progressively weakened. Structural characterization of microgels revealed that GH yielded microgels with smaller particle sizes and coarser and relatively dispersed granular structures, while CH resulted in microgels with lower potential values, smoother surfaces, and lumps resembling strand-like formations. Analysis of the structure and intermolecular force of microgels showed that the microgel formed by the GH gradually tended to be disordered, whereas the secondary structure of microgels formed by CH showed lower random coil content, resulting in a dense gel network aggregated through disulfide bonding, hydrophobic interactions and hydrogen bonding as demonstrated by frequency-dependent storage moduli measurements. Overall, this study presents a thorough characterization of microgels and shows that they can be tailored by selective proteolysis, which enables controlling the β-conglycinin/glycinin ratio of soy protein.

Advances in the formation mechanism of set-type plant-based yogurt gel: a review

Plant-based yogurt has several advantages over traditional yogurt, such as being lactose and cholesterol-free, making it more suitable for individuals with cardiovascular and gastrointestinal diseases. The formation mechanism of the gel in plant-based yogurt needs more attention because it is associated with the gel properties of yogurt. Most plant proteins, except for soybean protein, have poor functional abilities, such as solubility and gelling properties, which limits their application in most food items. This often results in undesirable mechanical quality of plant-based products, particularly plant-based yogurt gels, including grainy texture, high syneresis, and poor consistency. In this review, we summarize the common formation mechanism of plant-based yogurt gel. The main ingredients, including protein and non-protein components, as well as their interactions involved in the gel are discussed to understand their effects on gel formation and properties. The main interventions and their effects on gel properties are highlighted, which have been shown to improve the properties of plant-based yogurt gels effectively. Each type of intervention method may exhibit desirable advantages in different processes. This review provides new opportunities and theoretical guidance for efficiently improving the gel properties of plant-based yogurt for future consumption.

Effect of glycosylation modification on structure and properties of soy protein isolate: A review

Soybean protein isolate (SPI) is a highly functional protein source used in various food applications, such as emulsion, gelatin, and food packaging. However, its commercial application may be limited due to its poor mechanical properties, barrier properties, and high water sensitivity. Studies have shown that modifying SPI through glycosylation can enhance its functional properties and biological activities, resulting in better application performance. This paper reviews the recent studies on glycosylation modification of SPI, including its quantification method, structural improvements, and enhancement of its functional properties, such as solubility, gelation, emulsifying, and foaming. The review also discusses how glycosylation affects the bioactivity of SPI, such as its antioxidant and antibacterial activity. This review aims to provide a reference for further research on glycosylation modification and lay a foundation for applying SPI in various fields.

Effect and mechanism of freezing on the quality and structure of soymilk gel induced by different salt ions

BACKGROUND

The increasing attention toward frozen soy-based foods has sparked interest. Variations exist in the quality and structure of soymilk gels induced by different salt ions, leading to diverse changes post-freezing. This study compared and analyzed the effects of calcium chloride (CC), magnesium chloride (MC) and calcium sulfate (CS) on the quality characteristics and protein structure changes of soymilk gels (CC-S, MC-S and CS-S) before and after freezing, and clarified the mechanisms of freezing on soymilk gel.

RESULTS

The formation rate of soymilk gel is influenced by the type of salt ions. In comparison to CS and MC, soymilk gel induced by CC exhibited the fastest formation rate, highest gel hardness, lowest moisture content, and smaller gel pores. However, freezing treatment deteriorated the quality of soymilk gel induced by different salt ions, leading to a decline in textural properties (hardness and chewiness). Among these, the textual state of CC-induced soymilk gel remained optimal, exhibiting the least apparent damage and minimal cooking loss. Freezing treatments prompt a transition of soymilk gel secondary structure from β-turns to β-sheets, disrupting the protein's tertiary structure. Furthermore, freezing treatments also fostered the crosslinking between soymilk gel protein, increasing the content of disulfide bonds.

CONCLUSION

The quality of frozen soymilk gel is influenced by the rate of gel formation induced by salt ions. After freezing, soymilk gel with faster gelation rates exhibited a greater tendency for the transformation of protein-water interactions into protein-protein interactions. They showed a higher degree of disulfide bond formation, resulting in a more tightly knit and firm frozen gel network structure with denser and more uniformly distributed pores. © 2024 Society of Chemical Industry.

Characterization of high-internal-phase emulsions based on soy protein isolate with varying concentrations of soy hull polysaccharide and their capabilities for probiotic delivery: In vivo and in vitro release and thermal stability

In this study, the impact of soy hull polysaccharide (SHP) concentration on high-internal-phase emulsions (HIPEs) formation and the gastrointestinal viability of Lactobacillus plantarum within HIPEs were demonstrated. Following the addition of SHP, competitive adsorption with soy protein isolate (SPI) occurred, leading to increased protein adhesion to the oil-water interface and subsequent coating of oil droplets. This process augmented viscosity and enhanced HIPEs stability. Specifically, 1.8 % SHP had the best encapsulation efficiency and delivery efficiency, reaching 99.3 % and 71.1 %, respectively. After 14 d of continuous zebrafishs feeding, viable counts of Lactobacillus plantarum and complex probiotics in the intestinal tract was 1.1 × 107, 1.3 × 107, respectively. In vitro experiments further proved that HIPEs' ability to significantly enhance probiotics' intestinal colonization and provided targeted release for colon-specific delivery. These results provided a promising strategy for HIPEs-encapsulated probiotic delivery systems in oral food applications.

Novel strategy to raise the content of aglycone isoflavones in soymilk and gel: Effect of germination on the physicochemical properties

Germination holds the key to nutritional equilibrium in plant grains. In this study, the effect of soybean germination on the processing of soymilk (SM) and glucono-δ-lactone (GDL) induced soymilk gel (SG) was investigated. Germination promoted soybean sprout (SS) growth by activating the energy metabolism system. The energy metabolism was high during the three-day germination and was the most vigorous on the second day of germination. After germination, protein dissolution was improved in SM, and endogenous enzymes produced small molecule proteins. Small molecule proteins were more likely to aggregate to produce SM protein particles. Germination increased the water-holding capacity of SG induced by GDL but weakened the strength. Furthermore, the dynamic fluctuations in isoflavone content were closely monitored throughout the processing of soybean products, including SS, SM, and SG. Although the total amount of isoflavones in SM and SG processed from germinated soybeans decreased, a significant enrichment in the content of aglycone isoflavones was observed. The content of aglycone isoflavones in SG processed from germinated soybeans on the second day of germination was 736.17 ± 28.49 µg/g DW, which was 83.19 % higher than that of the control group. This study demonstrates that germination can enhance the nutritional value of soybean products, providing innovative opportunities for the development of health-promoting soybean-based products.

Impact of Oil Bodies on Structure, Rheology and Function of Acid-Mediated Soy Protein Isolate Gels

Oil bodies (OBs) are naturally occurring pre-emulsified oil droplets that have broad application prospects in emulsions and gels. The main purpose of this research was to examine the impact of the OB content on the structure and functional aspects of acid-mediated soy protein isolate (SPI) gel filled with OBs. The results indicated that the peanut oil body (POBs) content significantly affected the water holding capacity of the gel. The rheological and textural analyses showed that POBs reduced the gel strength and hardness. The scanning electron and confocal laser scanning microscopy analyses revealed that POBs aggregated during gel formation and reduced the gel network density. The Fourier transform infrared spectrum (FTIR) analysis demonstrated that POBs participated in protein gels through hydrogen bonds, steric hindrance and hydrophobic interactions. Therefore, OBs served as inactive filler in the acid-mediated protein gel, replaced traditional oils and provided alternative ingredients for the development of new emulsion-filled gels.

Freeze-thaw stability of transglutaminase-induced soy protein-maltose emulsion gel: Focusing on morphology, texture properties, and rheological characteristics

In this study, soy protein isolate (SPI) and maltose (M) were employed as materials for the synthesis of a covalent compound denoted as SPI-M. The emulsion gel was prepared by transglutaminase (TGase) as catalyst, and its freeze-thaw stability was investigated. The occurrence of Maillard reaction was substantiated through SDS-PAGE. The analysis of spectroscopy showed that the structure of the modified protein was more stretched, changed in the direction of freeze-thaw stability. After three freeze-thaw cycles (FTC), it was observed that the water holding capacity of SPI-M, SPI/M mixture (SPI+M) and SPI emulsion gels exhibited reductions of 8.49 %, 16.85 %, and 20.26 %, respectively. Moreover, the soluble protein content also diminished by 13.92 %, 23.43 %, and 35.31 %, respectively. In comparison to unmodified SPI, SPI-M exhibited increase in gel hardness by 160 %, while elasticity, viscosity, chewability, and cohesion demonstrated reductions of 17.7 %, 23.3 %, 33.3 %, and 6.76 %, respectively. Concurrently, the SPI-M emulsion gel exhibited the most rapid gel formation kinetics. After FTCs, the gel elastic modulus (G') and viscosity modulus (G″) of SPI-M emulsion were the largest. DSC analysis underscored the more compact structure and heightened thermal stability of the SPI-M emulsion gel. SEM demonstrated that the SPI-M emulsion gel suffered the least damage following FTCs.

Soy protein isolate-guar gum-goose liver oil O/W Pickering emulsions that remain stable under accelerated oxidation at high temperatures

BACKGROUND

Goose liver oil (GLO) is a solid-liquid mixture, rich in polyunsaturated fatty acids and high in nutritional value, but poor in fluidity and easily oxidized. Therefore, oil-in-water (O/W) Pickering emulsions of three polysaccharides and soy protein isolate (SPI) with GLO were prepared to improve the stability of it.

RESULTS

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), Fourier-transform infrared spectroscopy, and zeta potential revealed that the SPI and complexes with konjac glucomannan, pectin, and guar gum (GG) ranged from 17 to 75 kDa, with the site of action being the -OH stretch and the amide group, and bound by hydrogen bonding. Adding konjac glucomannan and GG significantly increased the water contact angle of the SPI to 74.1° and 59.0°, respectively. Therefore, the protein-polysaccharide complexes could enhance the emulsion stability. In addition, the O/W Pickering emulsions with GLO had near-Newtonian fluid rheological properties with a significant increase in apparent viscosity and viscoelasticity, forming a dual network structure consisting of a ductile and flexible protein network and a rigid and brittle polysaccharide network. The microstructure observation indicated that the O/W emulsions were spherical and homogeneous. The highest emulsification activity was observed for the SPI-GG-GLO emulsions, without significant delamination or flocculation and high oxidative stability after 7 days in storage.

CONCLUSION

These results demonstrate that the construction of SPI-GG-GLO O/W Pickering emulsions can stabilize GLO even at high temperatures that promote oxidation. © 2023 Society of Chemical Industry.

Chitin nanocrystals as natural gel modifier for yielding stronger acid-induced soy protein isolate gel

This study aimed to enhance the rheological properties and thermal stability of acid-induced soy protein isolate (SPI) gels by incorporating chitin nanocrystals (ChNCs) and proposing a gelation mechanism. SPI gels exhibited pseudo-plastic behavior. Increasing ChNCs concentration from 0.00 % to 1.00 % improved G' values, recovery rate, and initial degradation temperature: from 75.6 Pa to 1024.3 Pa, 80.27 % to 85.47 %, and 261.5 °C to 275.8 °C, respectively. FTIR analysis confirmed electrostatic and hydrogen bonding interactions between SPI and ChNCs. Adding 1.00 % ChNCs reduced α-helix content from 19.7 % to 12.1 % while increasing β-sheet content from 46.5 % to 52.6 %. This led to protein unfolding, exposure of Trp residues, and orderly aggregation, forming a dense cross-linked gel network. Gel particle size increased from 185.5 nm (no ChNCs) to 504.4 nm (1.00 % ChNCs), with reduced surface charges. Hydrophobic and electrostatic interactions were key forces stabilizing SPI-ChNCs gels. These findings offer a practical approach to enhancing traditional acid-induced protein gel-based functional foods using naturally sourced chitin nanocrystals.

Conjugation of soymilk protein and arabinoxylan induced by peroxidase to improve the gel properties of tofu

Arabinoxylan (AX) can form stable covalent bonds with protein to improve gel properties. We aimed to prepare a conjugate between soymilk protein (SMP) and AX by peroxidase, followed by the addition of transglutaminase (TG) to prepare tofu gels. The conjugate's properties and their effects on the mechanical properties, rheological properties, and microstructure of tofu gels were evaluated. Results revealed that the α-helix content decreased, the β-sheet content increased, and the surface hydrophobicity reduced from 1.60 × 105 to 1.27 × 105. The optimal amount of AX required to improve the properties of tofu gel was 1.0%. The tofu gel showed better hardness (118.44 g), water holding capacity (WHC) (86.17%), and higher storage modulus (G') and loss modulus (G″). Low-Field NMR (LF-NMR) showed that the water was evenly distributed. Scanning electron microscopy (SEM) revealed a denser and more regular three-dimensional gel network.

Monosaccharide-induced glycation enhances gelation and physicochemical properties of myofibrillar protein from oyster (Crassostrea gigas)

Glycation offers a promising potential to improve protein gelling properties in food industries. Therefore, the study was aimed to illustrate the effect of five monosaccharides (erythrose-aldotetrose, xylose-aldopentose, glucose-aldohexose, galactose-aldohexose, and fructose-ketohexose) with different carbon numbers and structure on the structure-gelling relationship of myofibrillar protein (MP) from oyster (Crassostrea gigas). Results showed that monosaccharides significantly increased the glycation degree of MP by increasing sulfhydryl content, forming stable tertiary conformation and decreasing surface hydrophobicity. Moreover, the gel properties of MP like gel strength, water holding capacity, water mobility were improved by alleviating aggregation including the increase of solubility and the decrease of particle sizes. Oyster MP glycated by glucose (aldohexose) possessed the optimal gel properties. Molecular docking simulation showed that hydrogen bonds and hydrocarbon bonds were the mainly non-covalent binding modes. The study will provide a theoretical basis for oyster protein glycation and expand its application on food gel.

Rheological and physicochemical properties of Spirulina platensis residues-based inks for extrusion 3D food printing

Novel food matrices (such as microalgae, plants, fungi, and microbial proteins) with high protein content and biological value, good amino acid profile, and functionality have been explored. Phycocyanin and active polysaccharides extracted from Spirulina platensis are used as food additives, treatment of colitis, as well as obesity prevention. However, most of the remaining Spirulina platensis residues are mainly used as fish feed at present. 3D food printing is one of the promising development techniques used in the food industry. The aim of this study was to develop a novel 3D printing material of Spirulina platensis residues with shear thinning characteristics, high viscosity and rapid recovery. The effects of moisture content and pretreatment method on the rheological properties of Spirulina platensis residues were clarified. Scanning electron microscopy was used to observe the microstructure and texture profile analysis was used to determine the texture characteristics of Spirulina platensis residues, rheology was used to determine the key 3D printing factors such as viscosity and modulus of Spirulina platensis residues. More importantly, the printing process could be realized under ambient conditions. The development of microalgae residue ink promoted the high-value and comprehensive utilization of microalgae, and also broadened the application of microalgae in the food field.

Effect of Flaxseed Gum on the Textural, Rheological, and Tribological Properties of Acid-Induced Soy Protein Isolate Gels

This study aimed to investigate the effects of incorporating different concentrations of flaxseed gum (FG) into acid-induced soy protein isolate (SPI) gels. The investigation focused on assessing the effects of FG on the textural, rheological, and tribological properties of the resultant SPI gels. The results showed that adding a small amount of FG (0.05%) to the SPI gel system increased the storage modulus (G') and enhanced gelation while improving textural properties including hardness, viscosity, elasticity, and adhesion. Moreover, these gels exhibited strong water-holding capacity, a desirable property in various food products. However, when the concentration was increased to 0.3%, the WHC of the gel decreased, as did the hardness and cohesiveness. The particle size of the gel also increased with increasing concentration. Tribological investigations revealed that at 0.05-0.2% FG addition, the coefficient of friction (μ) of the composite gel was decreased compared to the pure SPI gel. In the sliding speed range of 1-100 mm/s, the coefficient of friction gradually increased with increasing concentration. When the FG concentration was 0.05%, the μ of the gel system was the lowest. In summary, low concentration of FG (0.05%) was found to play an important role in improving the properties of SPI gel, including enhancing textural, rheological, and lubricating properties.

Mechanical Properties, Microstructure, and In Vitro Digestion of Transglutaminase-Crosslinked Whey Protein and Potato Protein Hydrolysate Composite Gels

The production of animal protein usually leads to higher carbon emissions than that of plant protein. To reduce carbon emissions, the partial replacement of animal protein with plant protein has attracted extensive attention; however, little is known about using plant protein hydrolysates as a substitute. The potential application of 2 h-alcalase hydrolyzed potato protein hydrolysate (PPH) to displace whey protein isolate (WPI) during gel formation was demonstrated in this study. The effect of the ratios (8/5, 9/4, 10/3, 11/2, 12/1, and 13/0) of WPI to PPH on the mechanical properties, microstructure, and digestibility of composite WPI/PPH gels was investigated. Increasing the WPI ratio could improve the storage modulus (G') and loss modulus (G″) of composite gels. The springiness of gels with the WPH/PPH ratio of 10/3 and 8/5 was 0.82 and 0.36 times higher than that of the control (WPH/PPH ratio of 13/0) (p < 0.05). In contrast, the hardness of the control samples was 1.82 and 2.38 times higher than that of gels with the WPH/PPH ratio of 10/3 and 8/5 (p < 0.05). According to the International Organization for Standardization of Dysphagia Diet (IDDSI) testing, the composite gels belonged to food level 4 in the IDDSI framework. This suggested that composite gels could be acceptable to people with swallowing difficulties. Confocal laser scanning microscopy and scanning electron microscopy images illustrated that composite gels with a higher ratio of PPH displayed thicker gel skeletons and porous networks in the matrix. The water-holding capacity and swelling ratio of gels with the WPH/PPH ratio of 8/5 decreased by 12.4% and 40.8% when compared with the control (p < 0.05). Analysis of the swelling rate with the power law model indicated that water diffusion in composite gels belonged to non-Fickian transport. The results of amino acid release suggested that PPH improved the digestion of composite gels during the intestinal stage. The free amino group content of gels with the WPH/PPH ratio of 8/5 increased by 29.5% compared with the control (p < 0.05). Our results suggested that replacing WPI with PPH at the ratio of 8/5 could be the optimal selection for composite gels. The findings indicated that PPH could be used as a substitute for whey protein to develop new products for different consumers. Composite gels could deliver nutrients such as vitamins and minerals to develop snack foods for elders and children.

Updates on Plant-Based Protein Products as an Alternative to Animal Protein: Technology, Properties, and Their Health Benefits

Plant-based protein products, represented by "plant meat", are gaining more and more popularity as an alternative to animal proteins. In the present review, we aimed to update the current status of research and industrial growth of plant-based protein products, including plant-based meat, plant-based eggs, plant-based dairy products, and plant-based protein emulsion foods. Moreover, the common processing technology of plant-based protein products and its principles, as well as the emerging strategies, are given equal importance. The knowledge gap between the use of plant proteins and animal proteins is also described, such as poor functional properties, insufficient texture, low protein biomass, allergens, and off-flavors, etc. Furthermore, the nutritional and health benefits of plant-based protein products are highlighted. Lately, researchers are committed to exploring novel plant protein resources and high-quality proteins with enhanced properties through the latest scientific and technological interventions, including physical, chemical, enzyme, fermentation, germination, and protein interaction technology.

Multi-dimensional analysis of heat-induced soybean protein hydrolysate gels subjected to ultrasound-assisted pH pretreatment

This study aimed to evaluate the gelation characteristics of soybean protein hydrolysate (SPH) extracted by enzyme-assisted aqueous extraction. Specifically, the changes in gelation behaviors for heat-induced (95 °C, 20 min) SPH dispersions treated with pH (pH 3, 5, 9; pH 7 as control) and ultrasound (U; 240 W, 30 min) were investigated. The results showed that typical gel behavior with high elastic nature in the viscoelasticity and network structures were observed during the heating process, where the disulfide bond played a dominant role in the gel network formation of all the samples. Notably, the heat-induced aggregation in the SPH gels was mainly formed by the association of the basic B polypeptide in 11S and β subunit in 7S. The most superior SPH gel was formed at pH 7 when assisted by ultrasonication during the heating process. This as-synthesized gel showed a uniform filamentous structure and exhibited the more excellent textural, rheological and thermal properties than those of the samples formed under acidic and alkaline conditions. These results are of great value in revealing the gelation mechanism of SPH.

Interactions of soy protein isolate with common and waxy corn starches and their effects on acid-induced cold gelation properties of complexes

Soy protein isolate (SPI) was mixed with different concentrations of common starch (CS) and waxy starch (WS) from corn. The interactions of SPI with CS or WS and their effects on the acid-induced cold gelation properties of complexes were investigated. Compared with WS, SPI could bind to CS more strongly and formed a tighter SPI-CS non-covalent complex, which resulted in the increased β-sheet and a more ordered secondary structure. The gel strength, water holding capacity (WHC), viscoelasticity, hydrophobic interactions and thermal stability of SPI-CS complex gels were enhanced as increasing CS concentration, and the complex with 2% of CS had the best gelation properties. Although adding WS reduced the gel strength, rheological properties and hydrophobic interactions of SPI-WS complex gels, it improved the WHC and thermal stability of the complex gels. Therefore, CS had a broader effect on improving acid-induced cold gelation properties of SPI than WS.

Effects of Sequential Enzymolysis and Glycosylation on the Structural Properties and Antioxidant Activity of Soybean Protein Isolate

The effects of limited hydrolysis following glycosylation with dextran on the structural properties and antioxidant activity of the soybean protein isolate (SPI) were investigated. Three SPI hydrolysate (SPIH) fractions, F30 (>30 kDa), F30-10 (10-30 kDa), and F10 (<10 kDa), were confirmed using gel permeation chromatography. The results demonstrated that the glycosylation of F30 was faster than that of F30-10 or F10. The enzymolysis caused the unfolding of the SPI to expose the internal hydrophobic cores, which was further promoted by the grafting of dextran, making the obtained conjugates have a loose spatial structure, strong molecular flexibility, and enhanced thermal stability. The grafting of dextran significantly enhanced the DPPH radical or •OH scavenging activity and the ferrous reducing power of the SPI or SPIH fractions with different change profiles due to their different molecular structures. The limited enzymolysis following glycosylation was proven to be a promising way to obtain SPI-based food ingredients with enhanced functionalities.

Application of definitive screening design to optimization of the protein extraction and functional properties of proteins in Auricularia auricula

BACKGROUND

Auricularia auricula (A. auricula) is one of the most abundant sources of plant protein in edible fungi. Problems of low protein yield exist in traditional methods of protein extraction such as alkali extraction and ultrasonic-assisted alkali after pretreatment with enzymes. Thus, the protein extraction process was investigated and optimized using a definitive screening design from A. auricula to improve the protein yield under practical operating conditions of temperature, the concentration of NaCl, meal/water ratio, extraction time and pH.

RESULTS

The yield of protein isolates of the isoelectric-ammonium sulfate precipitation (9.34% w/w) was obtained almost three times and the protein content (55.23% w/w) was approximately 1.6 times that of the traditional extraction method of isoelectric precipitation. Next, the optimized method was successfully applied to the analysis of the functional properties of the protein. A. auricula protein isolate (AAPI) had better solubility, emulsification and foaming capacity than soy protein isolate (SPI) and pea protein isolate (PPI), and the oil holding capacity of AAPI exhibited extremely well, which was approximately five times that of SPI and six times that of PPI. The texture properties of AAPI gel were similar to those of PPI gels.

CONCLUSION

AAPI extracted by the optimized method had a satisfactory yield and had the potential to substitute plant-originated proteins in food processing. © 2022 Society of Chemical Industry.

Structural Analysis and Study of Gel Properties of Thermally-Induced Soybean Isolate-Potato Protein Gel System

Heat-induced composite gel systems consisting of different soybean protein isolate (SPI) and potato protein (PP) mixtures were studied to elucidate their "backbone" and property changes. This was achieved by comparing the ratio of non-network proteins, protein subunit composition, and aggregation of different gel samples. It was revealed that SPI was the "gel network backbone" and PP played the role of "filler" in the SPI-PP composite gel system. Compared with the composite gels at the same ratio, springiness and WHC decrease with PP addition. For hardness, PP addition showed a less linear trend. At the SPI-PP = 2/1 composite gel, hardness was more than doubled, while springiness and WHC did not decrease too much and increased the inter-protein binding. The hydrophobic interactions and electrostatic interactions and hydrogen bonding of the SPI gel system were enhanced. The scanning electron microscopy results showed that the SPI-based gel system was able to form a more compact and compatible gel network. This study demonstrates the use of PP as a potential filler that can effectively improve the gelling properties of SPI, thus providing a theoretical basis for the study of functional plant protein foods.

Improved pH stability, heat stability, and functionality of phycocyanin after PEGylation

Phycocyanin (PC), a spirulina-derived protein-chromophore complex, suffers from poor techno-functional properties and is highly susceptible to aggregation and color changes upon heating and pH fluctuations. We tackled these issues by modifying PC via PEGylation. Electrophoresis and Fourier transform infrared spectroscopy proved successful conjugation of methoxy PEG (mPEG) chains on PC after PEGylation. Circular dichroism indicated highly ordered folding states adopted by PEGylated PC, which we attributed to the mPEG chains on the protein surface that sterically stabilized the protein structure. Consequently, the mPEG-PC conjugates exhibited high blue color intensity and improved thermodynamic stability. Further, benefit from an electrostatic shielding effect of mPEG chains, surface charges of PEGylated PC were neutralized over pH 2-9 and the blue hue of PC was stabilized against pH variations. Additionally, the flexible and hydrophilic mPEG polymers on the PC surface promoted protein-protein and protein-water interactions. PEGylated PC thus gained increased protein solubility, techno-functionality (emulsifying, foaming, and gelling performance), and antioxidant activities, when compared to unmodified PC. Heat-induced gels formed by mPEG-PC conjugates exhibited increased stiffness, higher water retention, and weak gel-type rheological properties. After PEGylation, the improved functional properties, bioactivity, and color stability against heat and pH fluctuations will facilitate food and pharmaceutical applications of PC.

Improving physicochemical properties of myofibrillar proteins from wooden breast of broiler by diverse glycation strategies

The effect of diverse glycation strategies on the physicochemical and structural properties of wooden breast myofibrillar protein (WBMP) were studied. The WBMP was mixed with D-ribose (RI), sodium alginate (SA), and glucosamine (GH) respectively in a weight ratio of 1:2 (w/w) at 70 °C, and was heated for 6 h. Atomic force microscopy and particle size results showed that the glycation reaction in the presence of RI made WBMP to be more evenly dispersed in the solution and had a significantly smaller particle size (78-955 nm, average 361.06 nm) (P < 0.05). There was an increase in WBMP-RI solubility (76.23 ± 0.56%) and α-helix content (51.23 ± 1.1%) than other groups. Compared with WBMP-RI, WBMP-SA and WBMP-GH have poor performance in particle distribution, solubility and emulsification. This study clarified the aldehyde group in aldose was more suitable for the glycation modification of WBMP than the ketone group in ketose.

Recent application of protein hydrolysates in food texture modification

The demand for clean labels has increased the importance of natural texture modifying ingredients. Proteins are unique compounds that can impart unique textural and structural changes in food. However, lack of solubility and extensive aggregability of proteins have increased the demand for enzymatically hydrolyzed proteins, to impart functional and structural modifications to food products. The review elaborates the recent application of various proteins, protein hydrolysates, and their role in texture modification. The impact of protein hydrolysates interaction with other food macromolecules, the effect of pretreatments, and dependence of various protein functionalities on textural and structural modification of food products with controlled enzymatic hydrolysis are explained in detail. Many researchers have acknowledged the positive effect of enzymatically hydrolyzed proteins on texture modification over natural protein. With enzymatic hydrolysis, various textural properties including foaming, gelling, emulsifying, water holding capacity have been effectively improved. It is evident that each protein is unique and imparts exceptional structural changes to different food products. Thus, selection of protein requires a fundamental understanding of its structure-substrate property relation. For wider applicability in the industrial sector, more studies on interactions at the molecular level, dosage, functionality changes, and sensorial attributes of protein hydrolysates in food systems are required.

Dual-frequency multi-angle ultrasonic processing technology and its real-time monitoring on physicochemical properties of raw soymilk and soybean protein

To improve the soybean protein content (SPC), flavor and quality of soymilk, the effects of dual-frequency ultrasound at different angles (40 + 20 kHz 0°, 40 + 20 kHz 30°, 40 + 20 kHz 45°) on physicochemical properties and soybean protein (SP) structure of raw soymilk were mainly studied and compared with the conventional single-frequency (40 kHz, 20 kHz) ultrasound. Furthermore, the intensity of the ultrasonic field in real-time was monitored via the oscilloscope and spectrum analyzer. The results showed that 40 + 20 kHz 45° treatment significantly increased SPC. The ultrasonic field intensity of 40 + 20 kHz 0° treatment was the largest (8.727 × 104 W/m2) and its distribution was the most uniform. The emulsifying stability of SP reached the peak value (233.80 min), and SP also had the largest particle size and excellent thermal stability. The protein solubility of 40 + 20 kHz 30° treatment attained peak value of 87.09%. 20 kHz treatment significantly affected the flavor of okara. The whiteness and brightness of raw soymilk treated with 40 kHz were the highest and the system was stable. Hence, the action mode of ultrasonic technology can be deeply explored and the feasibility for improving the quality of soymilk can be achieved.