Enhancing gelling properties of high internal phase emulsion-filled chicken gels: Effect of droplet fractions and salts

Strategy to kill two birds with one stone: High internal phase Pickering emulsions to modulate 3D printed pork texture as a dysphagia diet

This study proposes a kill two birds with one stone strategy to improve the health and safety of pork with high internal phase Pickering emulsions (HIPPEs). HIPPEs improved the pseudoplasticity and viscosity (from 619.3 to 1712 Pa·s at 0.1 s-1) of the pork, favoring smooth extrusion and adhesion of the ink. Shear recovery of pork gel increased from 39.20 % to 77.78 % by addition of HIPPEs. HIPPEs enhanced the pork gel viscoelastic properties (K4 = 341.29, K5 = 453.11) and yield stress (268.55 Pa). HIPPEs-adjusted pork gel (HPG) has favorable 3D printing, pork aroma, safe swallowing (level 5 food), and high digestibility (80.40 %), demonstrating its potential as a dysphagia diet. HPG reduced the cooking loss of pork (from 30.8 % to 1.9 %), which is suitable for dysphagic patients with reduced salivation. HIPPEs adjusts the properties of pork gel by filling and winding gel networks. These results provide new ideas for the development of special formula foods.

High internal phase emulsion as a fat replacer: Effect on physico-chemical properties, microstructure and protein digestibility of processed meat during reheating

Excessive intake of saturated fatty acids poses health risks, necessitating the development of healthier animal fat substitutes. In this study, high internal phase emulsion (HIPE) stabilized by egg yolk-hydroxypropyl distarch phosphate (EY-HPDSP) complex was used as a fat replacer in processed meat. The effect of fat replacement ratios (0 %, 50 %, 100 %) and reheating core temperature (75 ℃, 85 ℃, 95 ℃) on physico-chemical properties, microstructure and protein digestibility of processed meat was investigated. HIPE addition enhanced the hardness, springiness and L* values, and reduced the cooking loss and TBARs values of the processed meat (P < 0.05). Moreover, the replacement of HIPE significantly increased the protein digestibility and surface hydrophobicity, decreased the free sulfhydryl content and also caused the decreases in the amount of α-helix concomitant with increases in β-sheet, random coil and β-turn contents. When reheated to the core temperatures of 75-85 ℃, the hardness, T22 and A22 and protein digestibility were not significantly affected by 50 % fat substitution. At 95 ℃, the HIPE filled in the matrix underwent destruction that reduced the springiness of fat-reduced meats. This study suggested that HIPE fabricated by EY-HPDSP complex could be a viable fat replacer for processed meat before and reheating.

Comparative Analysis of Biochemical Parameters, Thermal Behavior, Rheological Features, and Gelling Characteristics of Thai Ligor Hybrid Chicken and Broiler Meats

Genetic differences typically cause differences in the structure and function of proteins in meat. The objective of this research was to examine the biochemical characteristics and functional behavior of proteins in fresh composite meat from Thai Ligor hybrid chicken (LC) and commercial broiler chicken (BC). The composite meat samples, which comprise minced breast and thigh without skin from 20 chicken carcasses in a 1:1 (w/w) ratio, were randomly selected for analysis using the completely randomized design (CRD). Results showed that BC meat exhibited higher ultimate pH after 24 h, Ca2+-ATPase activity, and trichloroacetic acid (TCA)-soluble peptide content compared to LC meat (p < 0.05). While both meat types showed non-significant differences in reactive sulfhydryl (SH) levels (p > 0.05), LC meat exhibited higher hydrophobicity compared to BC meat (p < 0.05). Differential scanning calorimetry (DSC) analysis revealed a single transition peak in all samples. LC meat exhibited higher thermal stability than BC meat, with transition peaks at 91 °C and 81 °C, respectively, in non-sodium chloride (NaCl) treated samples. Samples treated with 2.5% NaCl exhibited transition peaks around 70 °C for BC and 79 °C for LC. LC meat showed higher storage modulus (G') and loss modulus (G″) values than BC meat, suggesting a stronger gel-forming tendency. LC meat gels exhibited higher hardness, cohesiveness, gumminess, and chewiness, and a slightly lower pH (6.14 vs. 5.97) compared to BC meat gels (p < 0.05). LC meat gels displayed larger expressible moisture content (p < 0.05), although the value was approximately 6%. Compared to LC meat gels, BC meat gels appeared slightly whiter (p < 0.05). To compare the lipid oxidation of BC and LC meat gels day by day, the thiobarbituric acid reactive substances (TBARS) of gels stored at 4 °C in polyethylene bags were measured on Days 0, 4, and 8. Both BC and LC meat gels showed acceptable lipid oxidation-based rancid off-flavor after short-term storage at 4 °C, with TBARS values below 2 mg malondialdehyde (MDA) equivalent/kg on Day 8. Understanding these variations in biochemical properties and functional behavior can help optimize processing methods and produce meat products of superior quality that meet consumer preferences.

Effect of fat replacement in high internal phase emulsions constructed by high temperature saccharification of grafted proteins on gel properties and flavor profiles of sausages

In order to mitigate the risk of cardiovascular diseases associated with excessive saturated fatty acid intake, utilizing high internal phase emulsions (HIPEs) as a substitute for animal fat in producing high-quality fat-substituted meat products is an ideal approach. This study involves the preparation of glycosylation products of egg white protein (EWP) through saccharification at high temperatures in the presence of fructooligosaccharides (FO). The resulting glycation products of EWP were employed to create colloidal particles, forming HIPEs, which were further utilized to induce the formation of HIPEs gels (HIPEs-Gs). The study investigated the effects of substituting different ratios (25%, 50%, 75%, and 100%) of animal fat with HIPEs and HIPEs-Gs on the gel properties and flavor characteristics of sausages. Results showed that, compared to the control group, substituting fat with HIPEs significantly improved the gel properties, cooking yield, and G' of sausages, while excessive HIPEs-Gs substitution yielded negative effects. Low-field nuclear magnetic resonance results also demonstrated that adding HIPEs improved water and oil distribution in the sausage batter, enhancing protein's binding capacity with water. Scanning electron microscope revealed that HIPEs substitution led to a denser gel network with smaller pores, effectively "locking in" more water. Analysis of volatile compounds indicated accelerated release of aromatic compounds, alkanes, sulfides, and lipids when fat was substituted with HIPEs and HIPEs-Gs. Electronic tongue analysis suggested that HIPEs-Gs substitution reduced response values for umami and saltiness. In conclusion, compared to HIPEs-Gs, using HIPEs as a fat substitute improves the quality of sausages.

Freeze-thaw stability of high-internal-phase emulsion stabilized by chickpea protein microgel particles and its application in surimi

BACKGROUND

Future applications of high-internal-phase emulsions (HIPEs) are highly regarded, but poor freeze-thaw stability limits their utilization in frozen products. This study aimed to characterize the structure of chickpea protein microgel particles (HCPI) induced by NaCl and to assess its impact on the freeze-thaw stability of HIPEs.

RESULTS

The results showed that NaCl induction (0-400 mmol L-1) increased the surface hydrophobicity (175.9-278.9) and interfacial adsorbed protein content (84.9%-91.3%) of HCPI. HIPEs prepared with HCPI induced by high concentration of NaCl exhibited superior flocculation index and centrifugal stability, and their freeze-thaw stability was better than that of natural chickpea protein. The increase in NaCl concentration reduced the droplet aggregation and coalescence index of the freeze-thaw emulsions, diminishing the precipitation of oil from the emulsion. Linear and nonlinear rheology showed that the strengthened gel structure (higher G' values) restricted water flow and counteracted the damage to the interfacial film by ice crystals at 100-400 mmol L-1 NaCl, thus improving the viscoelasticity of the freeze-thaw emulsions. Finally, the thawing loss of surimi gel with HCPI-200 HIPE was reduced by 2.04% compared to directly adding oil.

CONCLUSION

This study provided a promising strategy to improve the freeze-thaw stability of HIPEs and reduce the thawing loss of frozen products. © 2024 Society of Chemical Industry.

Influence of flaxseed-derived diglyceride-based high internal phase Pickering emulsions on the rheological and physicochemical properties of myofibrillar protein gels

The study aimed to investigate the influence of flaxseed-derived diglyceride-based high internal phase Pickering emulsions (HIPPE) at different levels (0%, 10%, 20%, 30%, 40%, and 50%) on the rheological and physicochemical properties of myofibrillar protein (MPs) gels. The study indicated that with increasing HIPPE levels, there was a significant increase in whiteness while a decrease in water-holding capacity. The gels with 10% HIPPE levels had higher ionic bonds, while those with 40% and 50% HIPPE levels showed higher hydrogen bonds. By increasing HIPPE levels in the formation of MP gels, the T2 relaxation time was found to decrease. Additionally, in all MP gels, G' values were significantly higher than G" values over time. Adding lower contents of HIPPE levels resulted in a more compact microstructure. These findings indicate that flaxseed-derived diglyceride-based HIPPEs could be utilized as fat substitutes in meat products to enhance their nutritional quality.

Effect of modified cellulose-based emulsion on gel properties and protein conformation of Nemipterus virgatus surimi

Microcrystalline cellulose was modified by TEMPO oxidation combined with ultrasound to prepare modified cellulose-based emulsion. The effect of different emulsion concentration on gel properties and protein conformation of surimi was investigated. The results showed the length and width of microcrystalline cellulose were reduced, and a large amount of -COOH was introduced into modified cellulose. Direct addition of flaxseed oil decreased the gel strength and WHC from 3640.49 g·mm and 76.94% to 2702.95 g·mm and 75.89%, respectively, while 5% modified cellulose-based emulsion could improve the gel properties of surimi. Surimi gel containing 5% emulsion had the highest hydrophobic interaction, disulfide bond and β-sheet content. Moreover, protein network structure was the densest in 5% emulsion group. Therefore, modified cellulose-based emulsion could be used to compensating for the negative impact of direct addition of flaxseed oil on surimi, which provided a new idea for the development of healthy and new emulsified surimi products.

Impact of konjac glucomannan with varied deacetylation degrees on plant-based meat analogue: Study on the gel properties, digestibility, and microstructure

Polysaccharides are widely used to improve the quality of plant-based meat analogue (PMA). In this study, four kinds of konjac glucomannan (KG) with different deacetylation degrees (DD) were prepared, namely KG1 (native KG, DD = 0.00 %), KG2 (DD = 41.40 %), KG3 (DD = 80.01 %) and KG4 (DD = 89.07 %), and their effects on the quality of PMA were studied. Results manifested that KG3 improved the hardness (from 3017.16 g to 3307.16 g) and protein digestibility (from 49.65 % to 53.01 %) of PMA without reducing the P21, KG2 and KG4 were less effective than KG3, while KG1 led to a significant decline in the hardness and protein digestibility of PMA. The rheological properties and intermolecular force analysis showed that the partially deacetylated KG was more conducive to improving the G' of the protein system during heating and the proportion of covalent bonds in PMA. These findings suggested that partially deacetylated KG was more promising than native or highly deacetylated KG in PMA. Furthermore, scanning electron microscopy revealed that the morphology of KG gradually changed from fine filaments, to coarse filaments, short filaments and granules as DD increased. This study provides a theoretical basis for the application of partially deacetylated KG in PMA.

Investigating the effects of oil type, emulsifier type, and emulsion particle size on textured fibril soy protein emulsion-filled gels and soybean protein isolate emulsion-filled gels

The effects of oil type, emulsifier type, and emulsion particle size on the texture, gel strength, and rheological properties of SPI emulsion-filled gel (SPI-FG) and TFSP emulsion-filled gel (TFSP-FG) were investigated. Using soybean protein isolate or sodium caseinate as emulsifiers, emulsions with cocoa butter replacer (CBR), palm oil (PO), virgin coconut oil (VCO), and canola oil (CO) as oil phases were prepared. These emulsions were filled into SPI and TFSP gel substrates to prepare emulsion-filled gels. Results that the hardness and gel strength of both gels increased with increasing emulsion content when CBR was used as the emulsion oil phase. However, when the other three liquid oils were used as the oil phase, the hardness and gel strength of TFSP-FG decreased with the increasing of emulsion content, but those of SPI-FG increased when SPI was used as emulsifier. Additionally, the hardness and gel strength of both TFSP-FG and SPI-FG increased with the decreasing of mean particle size of emulsions. Rheological measurements were consistent with textural measurements and found that compared with SC, TFSP-FG, and SPI-FG showed higher G' values when SPI was used as emulsifier. Confocal laser scanning microscopy (CLSM) observation showed that the distribution and stability of emulsion droplets in TFSP-FG and SPI-FG were influenced by the oil type, emulsifier type and emulsion particle size. SPI-stabilized emulsion behaved as active fillers in SPI-FG reinforcing the gel matrix; however, the gel matrix of TFSP-FG still had many void pores when SPI-stabilized emulsion was involved. In conclusion, compared to SPI-FG, the emulsion filler effect that could reinforce gel networks became weaker in TFSP-FG.

Tailoring 3D-printed high internal phase emulsion-rice starch gels: Role of amylose in rheology and bioactive stability

This study investigated the properties of 3D-printed high internal phase emulsion (HIPE)-rice starch gels, specially tailored for personalized nutrition by co-encapsulating resveratrol and β-carotene. We examined the influence of amylose content on various parameters, including functional groups, linear and nonlinear rheology, printed precision and microstructural stability. Additionally, we assessed the protective efficacy and release in vitro digestion of these gels on the encapsulated bioactive components. Compared to HIPE, HIPE-starch gels differently impacted by amylose content in starches. Low-level amylose weakened the network structure, attributed to amylose mainly responsible for gel formation and weak hydrogen bond interaction between the surface-active molecules and amylose due to gelatinized starch granules rupturing the protein network. Oppositely, high-level amylose led to denser, more gel-like structures with enhanced mechanical strength and reversible deformation resistance, making them suitable for 3D printing. Furthermore, 3D-printed gels with high-level amylose demonstrated well-defined structures, smooth surfaces, stable printing and less dimension deviation. They were also regarded as effective entrapping and delivery systems for resveratrol and β-carotene, protecting them against degradation from environment and damage under the erosion of digestive fluid. Overall, this research offers a straightforward strategy for creating reduced-fat HIPE gels that serve as the carrier for personalized nutraceutical foods.

pH-shift strategy improving the thermal stability and oxidation stability of rice starch/casein-based high internal phase emulsions for the application in fish cake

The thermal stability of the different pH-shift rice starch/casein-based high internal phase emulsions (SC-HIPE) were evaluated in the present study to verify potential in improving the quality of fish cake. The results showed that the pH-shift treatment improved thermal stability (from 27.23% to 76.33%) and oxidation time (from 5.01 h to 6.86 h) of SC-HIPE, which showed the smaller droplet size (decreased from 15.14 to 1.64 μm) and higher storage module. The breaking force of FC with thermal stable SC-HIPE (average 64.95 g) was higher than that with thermal unstable SC-HIPE (51.05 g). The cohesiveness, adhesiveness and chewiness could be improved by adding thermal stable SC-HIPE, compared with pork fat. Additionally, combining sensory evaluation, the thermal stable SC-HIPE improved the gel quality, thus it could be completely replaced pork fat in the preparation of FC, which provided theoretical guidance for the preparation and application of fat substitutes.

Antarctic krill (Euphausia superba) oil high internal phase emulsions improved the lipid quality and gel properties of surimi gel

In the study, high internal phase emulsions (HIPEs) prepared from Antarctic krill oil (AKO) were added into surimi and the effects on gel properties, lipid quality and stability were investigated. It is found that HIPEs-added groups exhibited higher gel strength and lower cooking loss than Oil-added counterparts. HIPEs-added groups had higher proportion of capillary water, and microstructure of HIPEs-added gels showed fewer large voids and small size droplets. HIPEs-added groups also showed less pronounced myosin heavy chain band. HIPEs- and Oil-added gels showed > 3500 mg/kg EPA + DHA and 0.4-0.8 mg/kg astaxanthin, and most HIPEs-added groups had higher levels of them but lower TBARS values. Results suggest AKO-HIPEs could reduce the intervention by lipids on myosin crosslinking during gelation, and protect fatty acids and asxtanthin from oxidation due to oxygen-isolation led by their high accumulation. Thus, AKO-HIPEs can be applied to fortify ω-3 PUFA and maintain good gel properties in surimi product.

Impacts of soybean protein isolate hydrolysates produced at high hydrostatic pressure on gelling properties, structural characteristics, and molecular forces of myofibrillar protein

BACKGROUND

Soybean protein isolate hydrolysates (SPIHs) produced at high hydrostatic pressure have higher bioactivity. The aim of the study was to analyze the effects of different SPIH concentrations obtained under various pressures (0.1, 100, 200, and 300 MPa) on gelling properties, structural characteristics, and main forces of myofibrillar protein (MP) in MP-SPIH plural gels.

RESULTS

The MP-SPIH plural gel with 3% SPIH produced under 200 MPa had the maximum gel strength (0.42 N) and water holding capacity (53.69%). A decline in thermal stability and a rise in storage modulus (G') of MP-SPIH plural gels were found with increased SPIH pressure and concentration. Additionally, the addition of SPIHs increased the amounts of α-helix and β-sheet, decreased random coil structural content of MP in MP-SPIH plural gels, and facilitated the generation of a denser and uniform gels network. The molecular forces in MP-SPIH plural gels were mainly hydrophobic interaction and hydrogen bond.

CONCLUSION

This study showed that the interaction of MP with 3% SPIH obtained at 200 MPa improved the quality of plural gels. © 2022 Society of Chemical Industry.

Consolidating the gelling performance of myofibrillar protein using a novel OSA-modified-starch-stabilized Pickering emulsion filler: Effect of starches with distinct crystalline types

Starch-stabilized Pickering emulsions were employed as a novel particulate filler in myofibrillar protein (MP)-based gels for improving the gelling characteristics. The role of emulsions prepared by native starches (NS) with distinctive crystalline types (i.e., A-type waxy corn starch, B-type potato starch, and C-type pea starch) and their OSA-modified counterparts (A-OS, B-OS, C-OS) in the gelling performance was evaluated and compared with MP-stabilized-emulsion. Compared with MP-emulsion, starch-emulsion caused substantial increases in the gelling properties, notably for OSA-starch emulsions. Herein, A-OS exhibited up to 1.26-, 5.3-, and 2.9-fold increments in storage modulus, gel strength, and water holding capacity relative to pure MP gel, respectively, higher than B-OS and C-OS. Moreover, light microscopy evinced a more compact gel network filled with smaller and uniform oil droplets when A-OS emulsions were incorporated into the gels. The addition of OSA-starch emulsions, especially A-OS emulsion, facilitated the protein conformational conversion from α-helix to β-sheet and caused a marked reduction of free sulfhydryls in the gels; yet, the chemical forces that stabilized the gels altered, where remarkable reinforcements in hydrogen bond and hydrophobic interaction were detected, in support of the construction of splendid MP gels. Hence, OSA-starch emulsions show promise as functional components in meat products.

Mechanism of improving emulsion stability of emulsion-type sausage with oyster mushroom (Pleurotus ostreatus) powder as a phosphate replacement

This research evaluated the potentiality of oyster mushroom powder (OMP) as a phosphate alternative by improving emulsion stability of emulsion-type sausage. Sausage without phosphate (NC), with 0.2% sodium triphosphate (PC), and with 1 and 2% OMP (M1 and M2) were prepared. The OMP addition improved the physicochemical properties of sausage, effectively prevented lipid oxidation, and delayed the growth of aerobic bacteria during 28 days of cold storage compared to NC. The M1 and M2 improved the emulsion stability similar to PC. M2 had the highest water holding capacity and apparent viscosity and the lowest cooking loss (P < 0.05). The addition of OMP resulted in different textural characteristics from that of phosphate due to the formation of emulsion structures randomly entrapped by filament-like components, which were derived from polysaccharides or the conjugates between polysaccharides and proteins. According to the results of this study, emulsion stability promoted by OMP was mainly due to the polysaccharides, which are involved in enhancing viscosity and steric hindrance.

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Pectin Stabilized Fish Gelatin Emulsions: Physical Stability, Rheological, and Interaction Properties

Pectin, a kind of natural polysaccharide, shows the attractive potential as a natural stabilizer for protein emulsion. The aim of this study is to investigate the effect of pectin on the physical stability, rheology, interface, and interaction properties of the fish gelatin (FG) emulsion, as pectin was utilized to improve the stability of FG, fish oil emulsion. During the study, when pH &lt; 6, the FG-pectin emulsion displayed better storage stability and salinity tolerance. Analyzing the result, pectin could avoid phase separation at the freeze-thaw process and prevent the liquid-gel transition of FG emulsions during storage. On the other hand, when pH ≥ 6, the emulsion displayed high viscosity due to the complex flocculation and stratified during long-term storage. Electrostatic interactions, hydrophobic interactions, and hydrogen bonding of the FG-pectin complexes in the emulsion were all reduced. Overall, pectin improved the stability of FG emulsions through electrostatic repulsion, hydrophobic interactions, and steric hindrance.

Effects of quinoa protein Pickering emulsion on the properties, structure and intermolecular interactions of myofibrillar protein gel

The effects of quinoa protein Pickering emulsion (QPE) on the gel properties, protein structure and intermolecular interactions of myofibrillar protein (MP) gels were studied. Compared with the MP gels without QPE, the MP gels with 5.0%-7.5% added QPE showed significant increasing trends in storage modulus (G'), whiteness, gel strength and water holding capacity (WHC). The content of disulfide bonds in the gel increased with the addition of QPE and the disulfide bond conformation changed from gauche-gauche-gauche to gauche-gauche-trans. Moreover, the increase of hydrogen bonds after QPE addition confirmed the transformation from α-helix to β-sheet, as β-sheet structure was stabilized by interchain hydrogen bonds. The added QPE also enhanced the hydrophobic interaction and electrostatic interaction of MP gels. To conclude, the addition of 5.0%-7.5% QPE improved the intermolecular interactions and the structure stability of MP gels, and enhanced the gelation and WHC of MP gels.