A high-stable and sensitive colorimetric nanofiber sensor based on PCL incorporating anthocyanins for shrimp freshness

Fast and sustainable production of smart nanofiber mats by solution blow spinning for food quality monitoring: Potential of polycaprolactone and agri-food residue-derived anthocyanins

The shelf life of perishable foods is estimated through expensive and imprecise analyses that do not account for improper storage. Smart packaging, obtained by agile manufacturing of nanofibers functionalized with natural pigments from agri-food residues, presents promising potential for real-time food quality monitoring. This study employed the solution blow spinning (SBS) technique for the rapid production of smart nanofiber mats based on polycaprolactone (PCL), incorporating extracts of agricultural residues rich in anthocyanins from eggplant (EE) or purple cabbage (CE) for monitoring food quality. The addition of EE or CE to the PCL matrix increased the viscosity of the solution and the diameter of the nanofibers from 156 nm to 261-370 nm. The addition of extracts also improved the mechanical and water-related properties of the nanofibers, although it reduced the thermal stability. Attenuated total reflectance Fourier-transform infrared spectroscopy confirmed the incorporation of anthocyanins into PCL nanofibers. Nanofiber mats incorporated with EE or CE exhibited visible color changes (ΔE ≥ 3) in response to buffer solutions (pH between 3 and 10), and ammonia vapor. Smart nanofibers have demonstrated the ability to monitor fish fillet spoilage through visible color changes (ΔE ≥ 3) during storage. Consequently, smart nanofibers produced by the SBS technique, using PCL and anthocyanins from agro-industrial waste, reveal potential as smart packaging materials for food.

Wool powder assisted colorimetric sensing yarn with high sensitivity for NH3 monitoring

Colorimetric sensors have applications in gas monitoring due to their simple and quick detection through visible color changes. However, it remains challenging to prepare colorimetric sensors with high sensitivity. Herein, this work fabricated a biomass-based colorimetric sensing yarn with high sensitivity using anthocyanins as the colorimetric dye and wool powder as an effective ammonia (NH3) adsorbent. The sensitivity of the prepared yarns was evaluated for detection limit and response time. Surprisingly, the addition of 3% wool powder greatly improved the sensitivity of the prepared yarns, with a reduction of both detection limit and responsive time from 100 ppm to 20 ppm, and 2 min to 20 s, respectively when exposed in 150 ppm NH3. The prepared yarns also showed good selectivity and reusability. An example of the practical use of colorimetric yarns was presented. This work provides a facile strategy for fabricating wearable devices for toxic gas monitoring with visual output.

Preparation and properties of PCL coaxial electrospinning films with shell loaded with CEO and core coated LEO nanoemulsions

During storage and transportation, the reduction of microbial contamination and management of the exudation of fluids from the fish can effectively mitigate spoilage and degradation of fish fillets. In this work, the coaxial electrospinning films loaded with natural plant preservatives, namely laurel essential oil (LEO) and clove essential oil (CEO), were prepared by the coaxial electrospinning method synergistic with nanoemulsion techniques, and the hydrophilic preservation pads were prepared. The morphology of the film fiber is clear, without beads or damage, with fiber diameters falling within the 230-260 nm range. It has a distinct core-shell structure, exceptional thermal stability, and strong antibacterial and antioxidant properties. The core-shell structure of the fiber subtly regulates the release of preservatives and significantly improves the utilization efficiency. At the same time, the synergistic use of two essential oils can reduce the amount while amplifying their effectiveness. The pads significantly slowed down the increase of key indicators of spoilage, such as total viable count (TVC), pH, thiobarbituric acid reactive substances (TBA), and total volatile base nitrogen (TVB-N), during the storage of the fish fillets. Furthermore, the pads effectively slowed down the decline in water-holding capacity, the deterioration of textural qualities, and the negative changes in the microstructure of the fish muscle. Ultimately, the pads notably delayed the spoilage of fish fillets, extending their shelf life from 5 d to 9 d. The efficient utilization of biological preservatives in this film can provide technical support for the development of food preservation materials.

pH-triggered bilayer film based on carboxymethyl cellulose/zein/Eudragit L100 with purple cabbage anthocyanin for monitoring pork freshness

A novel pH-triggered bilayer film was composed of zein (Z), carboxymethylcellulose (CMC), Eudragit L100 (L100), and purple cabbage anthocyanin (PCA), followed by casting for monitoring pork freshness during storage at 4 °C and 25 °C. This bilayer film was employed to encapsulate anthocyanins, preventing anthocyanins oxidation and photodegradation. Additionally, under pH 6, this film ruptures and releases anthocyanins, inducing a sudden color change in the indicator film, significantly reducing errors in freshness indications. Notably, the ZCLP8% film had excellent stability and pH response properties. The performance of the ZCLP8% film in monitoring pork freshness was evaluated. When the concentration of pork TVB-N reached 15.59 mg/100 g (pH = 6.35), the bilayer film was ruptured, and the release rate of PCA was 85.52 %, which was a significant change in the color of the bilayer film compared with that at pH = 5. Therefore, this work addresses the limitation that anthocyanin-based intelligent films are subject to judgment errors when applied, opening new possibilities for food freshness differentiation monitoring.

Intelligent double-layer film based on gellan gum/modified anthocyanin/curcumin/sodium alginate/zinc oxide for monitoring shrimp freshness

In this study, intelligent double-layer films were prepared using modified black rice anthocyanin (MBRA)-curcumin (CUR)-gellan gum (GG) as the inner indicator layer and sodium alginate (ALG)‑zinc oxide (ZnO) as the outer antimicrobial layer. The bilayer films were successfully prepared, as revealed by scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction measurements. The mechanical characteristics, moisture content, and water vapor resistance of GG-MBRA/CUR1@ALG-ZnO, GG-MBRA/CUR2@ALG-ZnO, and GG-MBRA/CUR3@ALG-ZnO films showed significant enhancement compared to GG-MBRA/CUR3 and ALG-ZnO films. The bilayer films exhibited excellent pH responsiveness and reacted effectively to ammonia. The outer layer significantly improved the antioxidant and antibacterial properties of the inner layer. When the films were applied to shrimp, it was found that the double-layer films not only monitored the freshness of the shrimp in real-time but also were influential in extending the shelf life of the shrimp by about 1 d. Therefore, the double-layer film demonstrated potential as a smart packaging material for real-time monitoring of meat product freshness.

Smart colorimetric indicator films prepared from chitosan and polyvinyl alcohol with high mechanical strength and hydrophobic properties for monitoring shrimp freshness

This work aimed to develop and characterize a colorimetric indicator films based on chitosan (CS), polyvinyl alcohol (PVA), and shikonin (SKN) from radix Lithospermi by casting method. The prepared films can serve as smart packaging for monitoring shrimp freshness which having excellent antimicrobial and antioxidant activity. The shikonin containing films have better hydrophobicity, barrier properties, and tensile strength. The release kinetics analysis shows that the loading amount causes a prolonged release of SKN from the prepared films. Increasing SKN in the CS/PVA film from 1 wt% to 2 wt% improved antibacterial effect for 24 h. Additionally, pH-sensitive color shifts from reddish (pH 2) to purple-bluish (pH 13) were visually seen in shikonin based solutions as well as films. The CS/PVA/SKN film detected shrimp deterioration at three temperatures (25, -20, and 4 °C) through color change. This study introduces a favorable approach for smart packaging in the food industry using multifunctional films.

A review on improving the sensitivity and color stability of naturally sourced pH-sensitive indicator films

Naturally sourced pH-sensitive indicator films are of interest for real-time monitoring of food freshness through color changes because of their safety. Therefore, natural pigments for indicator films are required. However, pigment stability is affected by environmental factors, which can in turn affect the sensitivity and color stability of the pH-sensitive indicator film. First, natural pigments (anthocyanin, betalain, curcumin, alizarin, and shikonin) commonly used in pH-sensitive indicator films are presented. Subsequently, the mechanisms behind the change in pigment color under different pH environments and their applications in monitoring food freshness are also described. Third, influence factors, such as the sources, types, and pH sensitivity of pigments, as well as environmental parameters (light, temperature, humidity, and oxygen) of sensitivity and color stability, are analyzed. Finally, methods for improving the pH-sensitive indicator film are explored, encapsulation of natural pigments, incorporation of a hydrophobic film-forming matrix or function material, and protective layer have been shown to enhance the color stability of indicator films, the addition of copigments or mental ions, blending of different natural pigments, and the utilization of electrospinning have been proved to increase the color sensitivity of indicator films. This review could provide theoretical support for the development of naturally sourced pH-sensitive indicator films with high stability and sensitivity and facilitate the development in the field of monitoring food freshness.

Sustainable bioactive food packaging based on electrospun zein-polycaprolactone nanofibers integrated with aster yomena extract loaded halloysite nanotubes

Compostable zein-polycaprolactone (PZ) electrospun nanofiber integrated with different concentrations of Aster yomena extract loaded halloysite nanotubes (A. yomena-HNT) as bioactive nanofibrous food packaging is reported. SEM micrographs reveal heterogeneous nanofibers. A. yomena extract used in the study showed weak antioxidant activity with AAI and TEAC values of 0.229 and 0.346. In vitro, release profile over 7 days of A. yomena indicates a controlled, sustained, and prolonged release. The prepared nanofibers were effective against both gram-positive and gram-negative bacteria. The prepared composite nanofibers were rendered biocompatible and nontoxic when subjected to WST-1 and LDH assay after incubating with NIH 3T3 mouse fibroblast cell line. PZ-15 nanofiber packaging showed the best postharvest quality preservation in Black mulberry fruits after 4 days of storage at 25 °C and 85 % Rh. Moreover, the in vitro decomposition test reveals that the fabricated nanofibers decompose in the soil and do not pose as a threat to the environment.

Developing active and intelligent biodegradable packaging from food waste and byproducts: A review of sources, properties, film production methods, and their application in food preservation

Food waste and byproducts (FWBP) are a global issue impacting economies, resources, and health. Recycling and utilizing these wastes, due to processing and economic constraints, face various challenges. However, valuable components in food waste inspire efficient solutions like active intelligent packaging. Though research on this is booming, its material selectivity, effectiveness, and commercial viability require further analysis. This paper categorizes FWBP and explores their potential for producing packaging from both animal and plant perspectives. In addition, the preparation/fabrication methods of these films/coatings have also been summarized comprehensively, focusing on the advantages and disadvantages of these methods and their commercial adaptability. Finally, the functions of these films/coatings and their ultimate performance in protecting food (meat, dairy products, fruits, and vegetables) are also reviewed systematically. FWBP provide a variety of methods for the application of edible films, including being made into coatings, films, and fibers for food preservation, or extracting active substances directly or indirectly from them (in the form of encapsulation) and adding them to packaging to endow them with functions such as barrier, antibacterial, antioxidant, and pH response. In addition, the casting method is the most commonly used method for producing edible films, but more film production methods (extrusion, electrospinning, 3D printing) need to be tried to make up for the shortcomings of the current methods. Finally, researchers need to conduct more in-depth research on various active compounds from FWBP to achieve better application effects and commercial adaptability.

Electrospun nanofiber-based sensors for the detection of chemical and biological contaminants/hazards in the food industries

Food contamination reveals a major health risk globally and presents a significant challenge for the food industry. It can stem from biological contaminants like pathogens, parasites, and viruses, or chemical contaminants such as heavy metals, pesticides, drugs, and hormones. There is also the possibility of naturally occurring hazardous chemicals. Consequently, the development of sensing platforms has become crucial to accurately and rapidly identify contaminants and hazards in food products. Electrospun nanofibers (NFs) offer a promising solution due to their unique three-dimensional architecture, large specific surface area, and ease of preparation. Moreover, NFs exhibit excellent biocompatibility, degradability, and adaptability, making monitoring more convenient and environmentally friendly. These characteristics also significantly reduce the detection process of contaminants. NF-based sensors have the ability to detect a wide range of biological, chemicals, and physical hazards. Recent research on NFs-based sensors for the detection of various food contaminants/hazards, such as pathogens, pesticide/drugs residues, toxins, allergens, and heavy metals, is presented in this review.

Smart Nanofibrous Hydrogel Wound Dressings for Dynamic Infection Diagnosis and Control: Soft but Functionally Rigid

Chronic wounds, such as burns and diabetic foot ulcers, pose significant challenges to global healthcare systems due to prolonged hospitalization and increased costs attributed to susceptibility to bacterial infections. The conventional use of antibiotic-loaded and metal-impregnated dressings exacerbates concerns related to multidrug resistance and skin argyrosis. In response to these challenges, our research introduces a unique approach utilizing antibiotic-free smart hydrogel wound dressings with integrated infection eradication and diagnostic capabilities. Electrospinning stands out as a method capable of producing hydrogel nanofibrous materials possessing favorable characteristics for treating wounds and detecting infections under conditions utilizing sustainable materials. In this study, innovative dressings are fabricated through electrospinning polycaprolactone (PCL)/gelatin (GEL) hybrid hydrogel nanofibers, incorporating pDA as a cross-linker, εPL as a broad-spectrum antimicrobial agent, and anthocyanin as a pH-responsive probe. The developed dressings demonstrate exceptional antioxidant (>90% radical scavenging) and antimicrobial properties (95-100% killing). The inclusion of polyphenols/flavonoids and εPL leads to absolute bacterial eradication, and in vitro assessments using HaCaT cells indicate increased cell proliferation, decreased reactive oxygen species (ROS) production, and enhanced cell viability (100% Cell viability). The dressings display notable alterations in color that correspond to different wound conditions. Specifically, they exhibit a red/violet hue under healthy wound conditions (pH 4-6.5) and a green/blue color under unhealthy wound conditions (pH > 6.5). These distinctive color changes provide valuable insights into the versatile applications of the dressings in the care and management of wounds. Our findings suggest that these antibiotic-free smart hydrogel wound dressings hold promise as an effective and sustainable solution for chronic wounds, providing simultaneous infection control and diagnostic monitoring. This research contributes to advancing the field of wound care, offering a potential paradigm shift in the development of next-generation wound dressings.

Carrageenan-based active and intelligent packaging films integrated with anthocyanin and TiO2-doped carbon dots derived from sweet potato peels

Carrageenan-based sustainable active and pH-dependent color-changing composite films were fabricated by blending anthocyanin extracted from sweet potato peel (SPA) with TiO2-doped carbon dots (Ti-CDs) prepared using the biowaste of SPA extraction. The SPA and Ti-CDs were compatible with the carrageenan matrix and were uniformly dispersed in the used polymer to form a homogeneous film with increased mechanical properties. The composite film added with SPA and 3 wt% Ti-CD showed 100 % UV protection, superb antioxidant (100 % DPPH and ABTS scavenging assay), and potent antibacterial activity (complete eradication of foodborne L.monocytogenes and E. coli strains after 3 h incubation). Additionally, the composite films showed distinguishable colorimetric responses to pH 7-12 buffers and volatile ammonia. The intelligent sensing ability of the composite film was assessed through shrimp freshness monitoring, and the film's hue shifted from pink (fresh shrimp) to yellow/brown (inedible shrimp) during storage. Shrimp packaging studies have shown that composite films retard the rate of food quality change during storage and are a good indicator of shrimp spoilage. Therefore, the designed film is expected to have high applicability as a chip, and quick on-site sensor that detects seafood quality in real-time, and a highly effective multifunctional film for better product quality preservation.

Preparation and characterization of smart indicator films based on gellan gum/modified black rice anthocyanin/curcumin for improving the stability of natural anthocyanins

In order to improve the stability of natural anthocyanins in intelligent packaging materials, this work first modified black rice anthocyanins (BRA) by acylation with acetic acid, then modified the acylated BRA by co-coloring with different ratios of curcumin (CUR), and finally added the mixed indicator to gellan gum (GG) to develop intelligent packaging films with good stability. The UV spectroscopy results showed that acetic acid had successfully modified the BRA, while the thermal, photostability and pH stability of the modified black rice anthocyanin (MBRA) were significantly enhanced. The indicators of BRA, MBRA and MBRA mixed with CUR showed excellent pH sensitivity in different buffer solutions. The SEM, FT-IR and XRD results indicated apparent crystalline aggregates on the surface of the films added with a high concentration of CUR. Compared with GG-BRA film, GG-MBRA film improved all properties except for antioxidant performance. Notably, the GG-MBRA/CUR series composite films exhibited significant improvements over the GG-BRA and GG-MBRA films in terms of optical characteristics, mechanical properties, water vapor barrier, oxidation resistance, and color stability; meanwhile, all films exhibited excellent pH sensitivity. Considering all the properties of the films, GG-MBRA/CUR3 film has tremendous potential as a smart indicator film for improving freshness accuracy.

A comprehensive review of the spoilage of shrimp and advances in various indicators/sensors for shrimp spoilage monitoring

Shrimp is a popular internationally traded shellfish due to its unique taste, texture, and nutritional value. Shrimp is highly perishable because it has enough free amino acids, high moisture levels, non-nitrogenous compounds used for microbial growth, and melanosis. Shrimp spoilage after death is caused by various reasons, like autolysis (endogenous proteinases actions during shrimp storage), growth of spoilage microorganisms, ATP degradation, melanin formation, and lipid peroxidation. A microbial byproduct, total volatile basic nitrogen, is one of the major reasons for the generation of foul odors from shrimp spoilage. Shrimp freshness monitoring is crucial for market sellers and exporters. Traditional methods for estimating shrimp freshness are expensive and inaccessible to the general public. Sensors are rapid, sensitive, selective, and portable food toxins' detection tools, devoid of expensive instruments, skilled people, sample pretreatment, and a long detection time. This review addresses shrimp spoilage causes. The mechanisms of different stages of shrimp spoilage after death, like rigor mortis, dissolution of rigor mortis, autolysis, and microbial spoilage mechanisms, are discussed. This review highlights the last five years' advances in shrimp freshness detection sensors and indicators like colorimetric pH indicators, fluorescence sensors, electronic noses, and biosensors, their working principles, and their sensitivities. Commercially available indicators and sensors for shrimp spoilage monitoring are also discussed. A review highlighting the applications of the different sensors and indicators for monitoring shrimp freshness is unavailable to date. Challenges and future perspectives in this field are explained at the end.

Polycaprolactone/Anthocyanin-Based Electrospun Volatile Amines Gas Indicator with Improved Visibility by Varying Bi-Solvent Ratio: A Case of Intelligent Packaging of Mackerel

Electrospun nanofibers have been applied as a new technology for gas indicators in food intelligent packaging. A poly(ε-caprolactone) (PCL)/red cabbage anthocyanin (RCA)-based nanofiber volatile amines gas indicator was developed by applying a bi-solvent of acetic acid (AA) and formic acid (FA) in electrospinning. The visibility of color change was improved from pink to blue, compared to blue to yellow-green, when using a single solvent of AA. The solutes of PCL (12.5, 15, 17.5, and 20%) and RCA (10, 20, 30, and 40%) and the solvents of AA/FA (9:1, 7:3, 5:5, 3:7, and 1:9) were applied in electrospinning under the condition of 12.5 cm, 1.0 mL/h, and 20 kV. The optimal microstructure with the thinnest fiber diameter and constant arrangement without forming NF beads appeared under the 7:3 FA/AA, 15% PCL, and 20% RCA condition. The indicator changed from pink to blue with the values of total color change (ΔE) of 10, 14, and 18 when exposed to the saturated gas of ammonia solutions of 8, 80, and 800 mM, respectively. The indicator was stable and unchanged in color for 28 days when exposed to light at room temperature. In the application to mackerel packaging, the built-in indicator changed from pink to purple regardless of storage temperature when the spoilage point was reached.

Gelatin/poly(vinyl alcohol)-based dual functional composite films integrated with metal-organic frameworks and anthocyanin for active and intelligent food packaging

Innovative active and pH-colorimetric composite films were fabricated from gelatin/poly(vinyl alcohol) (Gel/PVA) integrated with copper-based metal-organic frameworks (Cu-MOFs) and red cabbage anthocyanin (RCA). The incorporation of Cu-MOFs improved the tensile strength, water resistance, and UV shielding properties of the developed composite films. The addition of anthocyanins and 3 wt% Cu-MOFs endowed the polymer matrix with excellent antioxidant (100 % against ABTS and DPPH radicals) and antibacterial (against Gram-positive and Gram-negative foodborne pathogenic bacteria) functions. The fabricated composite films exhibited significant color change at alkaline conditions of pH 7-12 and a marked color change upon exposure to ammonia. The designed indicator films used for shrimp freshness tracking and a visual color change from pink (for fresh shrimp) to green (for spoiled shrimp) was observed during storage at 28 °C for 24 h. The potential applications of the engineered composite films were studied by shrimp packaging, and the quality parameters of packaged samples were monitored during storage. The synergistic effects of adding anthocyanins and MOF nanostructures works for better product freshness preservation and responds well to shrimp spoilage level, introducing novel active and intelligent packaging options for practical smart packaging applications.

Recent advances on natural colorants-based intelligent colorimetric food freshness indicators: fabrication, multifunctional applications and optimization strategies

With the increasing concerns of food safety and public health, tremendous efforts have been concentrated on the development of effective, reliable, nondestructive methods to evaluate the freshness level of different kinds of food. Natural colorants-based intelligent colorimetric indicators which are typically constructed with natural colorants and polymer matrices has been regarded as an innovative approach to notify the customers and retailers of the food quality during the storage and transportation procedure in real-time. This review briefly elucidates the mechanism of natural colorants used for intelligent colorimetric indicators and fabrication methodologies of natural colorants-based food freshness indicators. Subsequently, their multifunctional applications in intelligent food packaging systems like antioxidant packaging, antimicrobial packaging, biodegradable packaging, UV-blocking packaging and inkless packaging are well introduced. This paper also summarizes several optimizing strategies for the practical application of this advanced technology from different perspectives. Strategies like adopting a hydrophobic matrix, constructing double-layer film and encapsulation have been developed to improve the stability of the indicators. Co-pigmentation, metal ion complexation, pigment-mixing and using substrates with high surface area are proved to be effective to enhance the sensitivity of the indicators. Approaches include multi-index evaluation, machine learning and smartphone-assisted evaluation have been proven to improve the accuracy of the intelligent food freshness indicators. Finally, future research opportunities and challenges are proposed. Based on the fundamental understanding of natural colorants-based intelligent colorimetric food freshness indicators, and the latest research and findings from literature, this review article will help to develop better, lower cost and more reliable food freshness evaluation technique for modern food industry.

Electrospun Nanofibers for Functional Food Packaging Application

With the strengthening of the public awareness of food safety and environmental protection, functional food packaging materials have received widespread attention. Nanofibers are considered as promising packaging materials due to their unique one-dimensional structure (high aspect ratio, large specific surface area) and functional advantages. Electrospinning, as a commonly used simple and efficient method for preparing nanofibers, can obtain nanofibers with different structures such as aligned, core-shell, and porous structures by modifying the devices and adjusting the process parameters. The selection of raw materials and structural design of nanofibers can endow food packaging with different functions, including antimicrobial activity, antioxidation, ultraviolet protection, and response to pH. This paper aims to provide a comprehensive review of the application of electrospun nanofibers in functional food packaging. Advances in electrospinning technology and electrospun materials used for food packaging are introduced. Moreover, the progress and development prospects of electrospun nanofibers in functional food packaging are highlighted. Meanwhile, the application of functional packaging based on nanofibers in different foods is discussed in detail.

Non-Isothermal Crystallization Kinetics of Poly (ɛ-Caprolactone) (PCL) and MgO Incorporated PCL Nanofibers

The study delves into the kinetics of non-isothermal crystallization of Poly (ɛ-caprolactone) (PCL) and MgO-incorporated PCL nanofibers with varying cooling rates. Differential Scanning Calorimetry (DSC-3) was used to acquire crystallization information and investigate the kinetics behavior of the two types of nanofibers under different cooling rates ranging from 0.5-5 K/min. The results show that the crystallization rate decreases at higher crystallization temperatures. Furthermore, the parameters of non-isothermal crystallization kinetics were investigated via several mathematical models, including Jeziorny and Mo's models. Mo's approach was suitable to describe the nanofibers' overall non-isothermal crystallization process. In addition, the Kissinger and Friedman methods were used to calculate the activation energy of bulk-PCL, PCL, and MgO-PCL nanofibers. The result showed that the activation energy of bulk-PCL was comparatively lower than that of nanofibers. The investigation of the kinetics of crystallization plays a crucial role in optimizing manufacturing processes and enhancing the overall performance of nanofibers.

A polylactide based multifunctional hydrophobic film for tracking evaluation and maintaining beef freshness by an electrospinning technique

A nanofiber film was prepared by a facile electrospinning technique using polylactide (PLA), butterfly pea flower extract (BPA) and cinnamaldehyde (CIN). The as-prepared film shows the prominent antioxidative, antibacterial, colorimetric and hydrophobic properties so that the beef freshness can be monitored and maintained up to 6 days at 4 °C simultaneously. Besides, the nanofiber structure endows the film with a fast color responsiveness under acidic-alkaline atmospheres with different concentrations. Moreover, this film exhibits higher tensile strength (9.56 Mpa) than that of the pure PLA electrospinning film (4.40 Mpa). Especially the introduction of the BPA effectively boosts the antimicrobial ability of the CIN. The freshness, sub-freshness and spoilage levels of the beef can be easily testified by observing the color difference change of the film. So the polylactide based multifunctional film as an intelligent packaging has an excellent potential for the sub-freshness detection of meat.

Fabrication and characterization of polyvinyl alcohol/sodium alginate/zein/ chitosan bilayer film for dynamic visualization of pork quality

The development of real-time and convenient meat freshness indication technology is crucial to ensure food safety. A novel antibacterial visualized intelligent film was designed based on polyvinyl alcohol (PA), sodium alginate (SA), zein (ZN), chitosan (CS), alizarin (AL) and vanillin (VA) using layer-by-layer assembly (LBL) method for real-time and in situ monitoring of pork freshness. The fabricated film had various advantageous properties, including an excellent hydrophobicity with a water contact angle (WCA) of 91.59°, improved color stability, excellent water barrier properties and increased mechanical performance (TS = 42.86 MPa). The fabricated film also demonstrated effective antibacterial properties with a bacteriostatic circle diameter of 13.6 mm for Escherichia coli. Moreover, the film can perceive and visualize the antibacterial effect through color changes, enabling dynamic visual monitoring of the antibacterial effect. A good correlation (R² = 0.9188) between the color changes (ΔE) and total viable count (TVC) of pork was documented. Conclusively, fabricated multifunctional film improves the accuracy and versatility of freshness indication and had great potential for food preservation and freshness monitoring. The outcomes of this research provides a new perspective for the design and development of multifunctional intelligent films.

Silk fibroin-based colorimetric microneedle patch for rapid detection of spoilage in packaged salmon samples

Spoiled salmon can cause foodborne diseases and severely affects human health. Herein, we report a pH-responsive colorimetric microneedle (MN) patch fabricated from bromothymol blue (BTB) and silk fibroin meth acryloyl (SilMA) (BTB/SilMA@MN patch) for sensing salmon spoilage. The needle tips of MN could penetrate food cling film and insert into fish to extract tissue fluids directly and transport the extracted fluids to the backing layer for color displaying. The color change of BTB/SilMA@MN patches depended on the pH variation resulting from the increase of total volatile basic nitrogen in salmon during storage. The color of MN patches changed from yellow to yellowish green and to final green, indicating salmon changed from fresh to medium fresh and then to putrefied, respectively. Salmon spoilage can be rapidly determined via naked eye recognition and also analyzed on a smartphone in a nondestructive way, allowing consumers to estimate food quality easily and reliably.

A double-layer smart film based on gellan gum/modified anthocyanin and sodium carboxymethyl cellulose/starch/Nisin for application in chicken breast

In order to overcome this challenge of poor stability of natural anthocyanins in intelligent packaging materials, roselle anthocyanin (RA) was first modified by acetic acid, and then a double-layer smart indication antimicrobial film was developed using modified roselle anthocyanin (MRA)-gellan gum (GG) as the inner layer and sodium carboxymethyl cellulose (CMC)-starch (ST)-Nisin as the outer layer. UV spectra revealed that acetic acid was successfully grafted onto RA, which dramatically improved their thermal stability, antioxidant capabilities, photostability, and pH stability. The bilayer films were successfully prepared, as revealed by scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction measurements. In comparison to GG-MRA and CMC-ST-Nisin films, the water content, water solubility, mechanical characteristics, water vapor barrier, oxygen barrier, and hydrophobicity of GG-MRA@CMC-ST-Nisin films were significantly enhanced. The presence of the outer layer films significantly enhanced the UV-vis light barrier, opacity, antioxidant and antibacterial properties of the inner layer films. When the films were applied to chicken breast, it was found that the indicator films not only monitored the freshness of the chicken in real-time but also that the GG-MRA film and the double-layer film were effective in extending the shelf life of the chicken by 1 and 2 days, respectively, compared to the control group.

Application of smart packaging for seafood: A comprehensive review

Nowadays, due to the changes in lifestyle and great interest of consumers in a healthy life, people have started increasing their seafood consumption. But due to their short shelf life, experts are looking for a new packaging called smart packaging (SMP) for seafood. There are different indicators/sensors in SMP; one of the effective indices is time-temperature, which can show consumers the best time of using seafood based on their shelf life and experienced temperature. Another one is radio-frequency identification (RFID) that is a transmission device that represents a separate form of the electronic information-based SMP systems. RFID does not belong to any of the categories of markers or sensors; it is an auto recognition system that applies cordless sensors to indicate segments and collect real-time information without manual interposition. This review covers the use of SMP in all marine foods, including fish, due to its high consumption and high content of polyunsaturated fatty acids, eicosapentaenoic acid (C20:5n-3) and docosahexaenoic acid (C22:6n-3), which are the considerable factors of n-3 polyunsaturated fatty acids for human.

A visual bi-layer sensor based on Agar/TiO2/butterfly bean flower anthocyanin/κ-carrageenan with photostability for monitoring Penaeus chinensis freshness

Visual indicator bi-layer films were manufactured incorporating κ-carrageenan, butterfly pea flower anthocyanin, varying Nano‑titanium dioxide (TiO₂) content and agar for Penaeus chinensis (Chinese white shrimp) freshness detection. The κ-carrageenan-anthocyanin (CA) layer served as indicator, while the TiO₂-agar (TA) layer functioned as the protective layer to improve the photostability of film. The bi-layer structure was characterized by scanning electron microscopy (SEM). The TA2-CA film had the best tensile strength with a value of 17.8 MPa and the lowest water vapor permeability (WVP) value of bi-layer films was 2.98 × 10^-7 g.m^-1.h^-1.pa^-1. The bi-layer film protected anthocyanin against exudation when immersed in aqueous solution of varying pH. The TiO₂ particles filled the pores of the protective layer, increasing the opacity from 1.61 up to 4.49 significantly improving the photostability with a consequent slight color change under illumination of UV/visible light. Under UV irradiation, the TA2-CA film had no significant color change with a ΔE value of 4.23. Finally, the TA2-CA films showed an obvious color change from blue to yellow green in the early stages of Penaeus chinensis putrefaction (≤48 h) then the color change and Penaeus chinensis freshness were well correlated (R² = 0.8739).

High-Stability Bi-Layer Films Incorporated with Liposomes @Anthocyanin/Carrageenan/Agar for Shrimp Freshness Monitoring

High-stability bi-layer films were prepared by incorporating anthocyanin-loaded liposomes into carrageenan and agar (A-CBAL) for non-destructive shrimp freshness monitoring. The encapsulation efficiency of the anthocyanin-loaded liposomes increased from 36.06% to 46.99% with an increasing ratio of lecithin. The water vapor transmission (WVP) of the A-CBAL films, with a value of 2.32 × 10^-7 g · m^-1 · h^-1 · pa^-1, was lower than that of the film with free anthocyanins (A-CBA). The exudation rate of the A-CBA film reached 100% at pH 7 and pH 9 after 50 min, while the A-CBAL films slowed down to a value lower than 45%. The encapsulation of anthocyanins slightly decreased the ammonia sensitivity. Finally, the bi-layer films with liposomes successfully monitored shrimp freshness with visible color changes to the naked eye. These results indicated that films with anthocyanin-loaded liposomes have potential applications in high-humidity environments.

Edible films/coatings containing bioactive ingredients with micro/nano encapsulation: A comprehensive review of their fabrications, formulas, multifunctionality and applications in food packaging

Due to the consumer's pursuit of safe, nontoxic and nutritious foods, edible and/or biodegradable materials have stood out in food packaging and preservation. In this context, the preparation and application of micro/nano encapsulated active ingredients (M/N-E-BAIs) represent a step toward reinforcing the properties of sustainable and controllable food packaging, particularly for the successful incorporation of new substances and functionalities into traditional edible films/coatings. This review, from the preparation of M/N-E-BAIs, the fabrication of edible film/coating containing M/N-E-BAIs to their characterization of multifunction and the application in food, makes a systematic summary and in-depth discussion. Food-grade polymers can encapsulate bioactive ingredients (BAIs) by chemical, physicochemical and mechanical methods, thereby forming M/N-E-BAIs with suitable sustained-release and unique biological activities. Furthermore, M/N-E-BAIs is incorporated into biopolymer substrates by solvent casting, 3D printing or electrostatic spinning to obtain novel edible films/coatings. This advanced packaging material exhibits superior physicochemical and functional properties over traditional food films/coatings. Besides, their applications in foods as active and intelligent packaging can improve food quality, prolong shelf life and monitor food corruption. Even so, there are still many challenges and limitations in formulation, preparation and application of this new packaging technology that need to be addressed in the future.

Polymeric Packaging Applications for Seafood Products: Packaging-Deterioration Relevance, Technology and Trends

Seafood is a highly economical product worldwide. Primary modes of deterioration include autolysis, oxidation of protein and lipids, formation of biogenic amines and melanosis, and microbial deterioration. These post-harvest losses can be properly handled if the appropriate packaging technology has been applied. Therefore, it is necessary for packaging deterioration relevance to be clearly understood. This review demonstrates recent polymeric packaging technology for seafood products. Relationship between packaging and quality deterioration, including microbial growth and chemical and biochemical reactions, are discussed. Recent technology and trends in the development of seafood packaging are demonstrated by recent research articles and patents. Development of functional polymers for active packaging is the largest area for seafood applications. Intelligent packaging, modified atmosphere packaging, thermal insulator cartons, as well as the method of removing a fishy aroma have been widely developed and patented to solve the specific and comprehensive quality issues in seafood products. Many active antioxidant and antimicrobial compounds have been found and successfully incorporated with polymers to preserve the quality and monitor the fish freshness. A thermal insulator has also been developed for seafood packaging to preserve its freshness and avoid deterioration by microbial growth and enzymatic activity. Moreover, the enhanced biodegradable tray is also innovative as a single or bulk fish container for marketing and distribution. Accordingly, this review shows emerging polymeric packaging technology for seafood products and the relevance between packaging and seafood qualities.

Development of highly stable color indicator films based on κ-carrageenan, silver nanoparticle and red grape skin anthocyanin for marine fish freshness assessment

Color indicator films for fish freshness were fabricated by incorporating κ-carrageenan (CAR) polymer with red grape skin extract (GSE) as a pH-sensing agent and silver nanoparticles (AgNPs) as an antimicrobial agent. Anthocyanins in GSE exhibited distinguished pH responsive color changes. GSE and AgNPs were well compatible with CAR with intramolecular interactions, approved by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis, thermo-gravimetric analysis (TGA) and differential scanning calorimetry (DSC). GSE-containing films displayed distinguished color changes in response to pH variations and volatile ammonia. Enhanced UV blocking ability and strong antioxidant activity were revealed for GSE included films without sacrificing the physico-chemical properties of the CAR film. Films containing AgNPs showed improved mechanical strength and strong antimicrobial ability against both Escherichia coli and Staphylococcus aureus. The CAR/AgNPs/GSE film displayed a distinctive color change corresponding to changes in the total volatile basic nitrogen (TVB-N) of fish during storage. In addition, the CAR/AgNPs/GSE film showed excellent color stability to consecutive UV exposure and its storage time at 25 °C is expected to be at least 240 days, which indicates that it has high potential as an intelligent food freshness indicator film.

High- sensitivity bilayer nanofiber film based on polyvinyl alcohol/sodium alginate/polyvinylidene fluoride for pork spoilage visual monitoring and preservation

A colorimetric bilayer film for pork freshness detection and preservation was developed using electrospinning technique. The bilayer film consisted of a layer with polyvinyl alcohol - sodium alginate - alizarin as sensor layer and a layer with polyvinylidene fluoride - vanillin as antibacterial layer. The water contact angle of bilayer film was larger than the single colorimetric layer. The color sensitivity to the ammonia of the bilayer film was higher, with an ΔE value of 47.99. The film could display color shifts from yellow to purple with the naked eye is critical for checking pork freshness. In addition, the bilayer film exhibited sensitive antibacterial activity, with an inhibition zone against S. aureus (8.3 mm) and E. coli (14.7 mm), respectively. Finally, the bilayer film was applied to freshness monitoring of pork. The film displayed significant color changes and prolonged the pork shelf life by 24 h at 25 °C.