A novel composite edible film fabricated by incorporating W/O/W emulsion into a chitosan film to improve the protection of fresh fish meat

W/O/W Pickering emulsions stabilized by complex modified phycocyanin

BACKGROUND

A water-in-oil-in-water (W/O/W) double emulsion can simultaneously load hydrophilic and hydrophobic substances due to its unique two-membrane, three-phase structure. However, thermodynamic instability greatly limits the application of double emulsions in food processing. Further development of Pickering emulsions based on proteins, etc., can improve the stability and loading capacity. It is of great significance to promote their practical application.

RESULTS

Herein, we prepared ultrasound pretreatment complex glycation-modified phycocyanin (UMPC) to stabilize a W/O/W Pickering emulsion for the codelivery of vitamin B12 (VB12) and vitamin E (VE). First, an inner water phase and oil phase containing polyglycerin polyricinoleate were homogenized to prepare a W/O emulsion. Subsequently, the W/O emulsion was homogenized with an outer water phase containing UMPC to obtain a W/O/W Pickering emulsion. A gel-like inner phase emulsion with excellent storage and thermal stabilities was obtained under the condition that the W/O emulsion volume ratio was 80% and the UMPC was stabilized by 10 g kg-1. The double emulsion after loading VB12 and VE showed good encapsulation effect during the storage period, the encapsulation rate could reach more than 90%, it also showed excellent protection effect under long-time storage and UV irradiation and the retention rate increased by more than 65%. In addition, the bioavailability of VB12 and VE significantly increased during simulated gastrointestinal digestion and reached 46.02% and 52.43%, respectively.

CONCLUSION

These results indicate that the UMPC-stabilized W/O/W Pickering emulsion is an effective carrier for the codelivery of hydrophilic and hydrophobic bioactive molecules and also provides a means for useful exploration of an efficient and stable emulsion system stabilized by biological macromolecules. © 2024 Society of Chemical Industry.

Enhancement of the quality and preservation of frozen burgers by active coating containing Rosa canina L. extract nanoemulsions

This study aimed to assess the impact of an edible coating holding within chia seed gum (CSG) and Rosa canina L. extract (RCE) nanoemulsions (10%, 20%, and 40% w/w) on the oxidation, microbial load, and sensory characteristics of burgers in a 90-day frozen storage period. Based on the findings, the active CSG coatings showed remarkable antioxidant and antimicrobial activities. By increasing the level of RCE nanoemulsions, the functional activity of coatings significantly increased (P < 0.05). Upon the termination of the storage period, the lowest microbial load (i.e., a decrease of 0.5-2 log CFU/g in the number of different bacteria compared to the control) and oxidation stability were observed in burgers coated with a CSG solution containing 40% RCE nanoemulsions. This burger also showed the highest sensory acceptance on the last day. In conclusion, it is proposed to use the active coating produced in this study to maintain meat products' quality and safety and increase their shelf-life.

Application of Lactiplantibacillus plantarum hydrogel coating in combination with ice temperature for the preservation of fresh yak meat

Fresh yak meat is highly nutritious and prone to spoilage, so developing suitable preservation methods is crucial. In this study, hydrogel coatings composed of konjac glucomannan, Lactiplantibacillus plantarum and gallic acid (KGX) were applied to preserve fresh yak meat under ice temperature (-1 °C). After 16 days, KGX group showed lowest total viable count (5.3 ± 0.1 log cfu/g) and total volatile basic nitrogen (13.02 ± 1.40 mg/100 g), which did not exceed the relevant standards of fresh meat. Combined assessments of color, texture, pH, drip loss rate, and thiobarbituric acid reactive substances indicated that KGX coating effectively prolonged yak meat preservation. High-throughput sequencing revealed that KGX coating effectively reduced the abundance of Pseudomonas and Candida. The application of L. plantarum hydrogel coatings in conjunction with ice temperature increased the shelf life of fresh yak meat to 16-20 days, suggesting its potential as a viable preservation method for fresh meat.

Properties of modified chitosan-based films and coatings and their application in the preservation of edible mushrooms: A review

Edible mushrooms are prone to deteriorate during storage. A Single chitosan film or coating has limitations in preservation. Therefore, this article focused on the improvement of modified chitosan-based films and coatings on properties related to storage quality of edible mushrooms (e.g.: safety, barrier, mechanical, antioxidant and antibacterial properties). Besides, the application of chitosan-based materials in the preservation of mushrooms was also discussed. The modified chitosan film and coating can slow down the respiration of mushrooms, inhibit the growth of microorganisms, protect antioxidant compositions, and regulate the activity of related enzymes, thus improving the quality and prolonging the shelf life of mushrooms. Meanwhile, the added ingredients improve the water and gas barrier properties of chitosan through volume and group occupation, and reduce the light transmittance of chitosan through light transmission, scattering and absorption. Essential oils and polyphenolic compounds had a better enhancement of antioxidant and antimicrobial properties of chitosan.

Effect of clove essential oil nanoemulsion on physicochemical and antioxidant properties of chitosan film

This study evaluated the physicochemical and antioxidant properties of clove essential oil (0, 0.2, 0.4, 0.6, 0.8, 1.0 % v/v) nanoemulsion (CEON) loaded chitosan-based films. With the increasing concentrations of the CEON, the thickness, b* and ΔE values of the films increased significantly (P < 0.05), while L* and light transmission dropped noticeably (P < 0.05). The hydrogen bonds formed between the CEON and chitosan could be demonstrated through Fourier-transform infrared spectra, indicating their good compatibility and intermolecular interactions. Furthermore, the added CEON considerably reduced the crystallinity and resulted in a porous structure of the films, as observed through X-ray diffraction plots and scanning electron microscopy images, respectively. This eventually led to a drop in both tensile strength and moisture content of the films. Moreover, the antioxidant properties were significantly enhanced (P < 0.05) with the increase in the amount of clove essential oil (CEO) due to the encapsulation of CEO by the nanoemulsion. Films containing 0.6 % CEO had higher elongation at break, higher water contact angle, lower water solubility, lower water vapor permeability, and lower oxygen permeability than the other films; therefore, such films are promising for application in meat preservation.

Bacteriostasis of nisin against planktonic and biofilm bacteria: Its mechanism and application

Food safety incidents caused by bacterial contamination have always been one of the public safety issues of social concern. Planktonic cells, viable but non-culturable (VBNC) cells, and biofilm cells of bacteria can coexist in food or food processing, posing more serious challenges to public health and safety by increasing bacterial survival and difficulty in detection. As a non-toxic, no side effect, and highly effective bacteriostatic substance, nisin has received wide attention from researchers. In this review, we summarized the species and biosynthesis of nisin, the effects of nisin alone or in combination with other treatments on planktonic and biofilm cells, and its applications in the fields of food, feed, and medicine by consulting numerous studies. Meanwhile, the mechanism of nisin on planktonic and biofilm cells was proposed based on existing researches. Nisin not only has antibacterial activity against most G+ bacteria but also exhibits a bacteriostatic effect on G- bacteria when combined with other antibacterial treatments. In addition to planktonic cells, nisin also has significant effects on bacterial cells in biofilms by changing the thickness, density, and composition of biofilms. Based on the three action processes of nisin on biofilms, we summarized the changes of bacteria in biofilms, including the causes of bacterial death and the formation of the VBNC state. We consider that research on the relationship between nisin and VBNC state should be strengthened.

Enhancing the lipid stability of foods of animal origin using edible packaging systems

Foods of animal origin are prone to oxidation due to their high lipid content and fatty acid profile. Edible packaging systems have evolved as a new way of preserving animal-derived foods and have been reported to retard lipid oxidation using antioxidant molecules from side-streams, waste, and agricultural by-products. Studies have evaluated previously undocumented film materials and novel bioactive molecules as additives for edible packaging for animal-derived foods. However, none of the studies is specifically focused on evaluating the packaging systems available for enhancing lipid stability. This paper thoroughly examines and discusses the application of edible packaging containing novel antioxidant molecules for controlling the lipid oxidation of animal-derived foods. The paper analyses and interprets the main findings of the recently published research papers. The materials and active principles used for enhancing lipid stability have been summarised and the underlying mechanisms discussed in detail. Studies should aim at using cheaper and readily available natural ingredients in future for the production of affordable packaging systems.

Application of encapsulated flavors in food products; opportunities and challenges

Flavors are considered among the most important components of food formulations since they can predominantly affect the consumer acceptance and satisfaction. However, most flavors are highly volatile and inherently sensitive to pH, light, thermal processes, and chemical reactions such as oxidation and hydrolysis. Encapsulation is used as an effective strategy for protecting flavors from environmental conditions and extending their shelf life. Moreover, release characteristics of flavors can be modified via application of appropriate carriers and wall materials. This review focuses on the use of encapsulated flavors in various food products. Various factors affecting flavor retention during encapsulation, flavor release mechanisms, profiles and kinetics are discussed. Finally, the challenges associated with the use of encapsulated flavors in food products (in situ) and to model systems (in vitro), their storage stability, product requirements and problems related to the market are presented.

Fabrication of carvacrol loaded cellulose acetate phthalate/shellac composite film and its application to mackerel fillets preservation

In this research, the carvacrol (CAR) loaded cellulose acetate phthalate (CAP) /shellac (SH) films were prepared via electrostatic repulsion strategy and casting method. The CAP/SH-CAR films demonstrated excellent tensile strength, while also exhibiting good UV light barrier and thermal stability. The results showed that the addition of CAR significantly improved the barrier of the CAP film to water vapor and oxygen permeability. When the addition amount of CAR was 0.9 % (w/w) with respect to CAP content, the CAP/SH-CAR films exhibited good antibacterial activity and effectively reduced the growth of S. aureus and E. coli by approximately 47.9 % and 50.9 %, respectively. The presence of SH improved the retention rate of CAR in CAP/SH-CAR films, with the retention rate ranging from 45.2 to 56.8 %. Finally, the CAP/SH-CAR films were applied to preserve the mackerel fillets, indicating that the rate of freshness deterioration had been delayed and showing a good freshness preservation effect. Therefore, the CAP/SH-CAR films have the potential to be used as food packaging materials.

Influence of myoglobin on the antibacterial activity of carvacrol and the binding mechanism between the two compounds

BACKGROUND

Myoglobin (MB), a pigmentation protein, can adversely affect the antibacterial activity of carvacrol (CAR) and weaken its bacteriostasis effect. This study aimed to clarify the influence of MB on the antibacterial activity of CAR and ascertain the mechanism involved in the observed influence, especially the interaction between the two compounds.

RESULTS

Microbiological analysis indicated that the presence of MB significantly suppressed the antibacterial activity of CAR against Listeria monocytogenes. Ultraviolet-visible spectrometry and fluorescence spectroscopic analysis confirmed the interaction between CAR and MB. The stoichiometric number was determined as ~0.7 via double logarithmic Stern-Volmer equation analysis, while thermodynamic analysis showed that the conjugation of the two compounds occurred as an exothermal reaction (ΔH° = -32.3 ± 11.4 kJ mol-1 and ΔS° = -75 J mol-1  K-1 ). Circular dichroism, Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy showed hydrogen bonding in the carvacrol-myoglobin complex (CAR-MB). Molecular docking analysis confirmed that amino acid residues, including GLY80 and HIS82, were most likely to form hydrogen bonds with CAR, while hydrogen bonds represented the main driving force for CAR-MB formation.

CONCLUSION

CAR antibacterial activity was significantly inhibited by the presence of MB in the environment due to the notable reduction in the effective concentration of CAR caused by CAR-MB formation. © 2023 Society of Chemical Industry.

Emerging technologies in seafood processing: An overview of innovations reshaping the aquatic food industry

Seafood processing has traditionally been challenging due to the rapid spoilage rates and quality degradation of these products. With the rise of food science and technology, novel methods are being developed to overcome these challenges and improve seafood quality, shelf life, and safety. These methods range from high-pressure processing (HPP) to edible coatings, and their exploration and application in seafood processing are of great importance. This review synthesizes the recent advancements in various emerging technologies used in the seafood industry and critically evaluates their efficacy, challenges, and potential benefits. The technologies covered include HPP, ultrasound, pulsed electric field, plasma technologies, pulsed light, low-voltage electrostatic field, ozone, vacuum cooking, purified condensed smoke, microwave heating, and edible coating. Each technology offers unique advantages and presents specific challenges; however, their successful application largely depends on the nature of the seafood product and the desired result. HPP and microwave heating show exceptional promise in terms of quality retention and shelf-life extension. Edible coatings present a multifunctional approach, offering preservation and the potential enhancement of nutritional value. The strength, weakness, opportunity, and threat (SWOT) analysis indicates that, despite the potential of these technologies, cost-effectiveness, scalability, regulatory considerations, and consumer acceptance remain crucial issues. As the seafood industry stands on the cusp of a technological revolution, understanding these nuances becomes imperative for sustainable growth. Future research should focus on technological refinements, understanding consumer perspectives, and developing regulatory frameworks to facilitate the adoption of these technologies in the seafood industry.

Encapsulation of purple basil leaf extract by electrospraying in double emulsion (W/O/W) filled alginate-carrageenan beads to improve the bioaccessibility of anthocyanins

The purple basil leaf extract (PBLE) was encapsulated in double emulsion (W1/O/W2)-loaded beads (emulgel) by electrospraying. The influence of κ-carrageenan (κ-CG) and cross-linking agents (Ca2+/K+) on the properties of alginate (SA) beads were assessed. In emulgel beads, κ-CG inclusion resulted in larger sizes and more distorted shapes, wrinkles on the surface, and lower gel strength. The encapsulation efficiency of anthocyanins (ACNs) in emulgel beads ranged from 70.73 to 87.89 %, whereas it ranged from 13.50 to 20.67 % in emulsion-free (hydrogel) beads. Fourier transforms infrared (FTIR) revealed the crosslinking of SA and κ-CG with Ca2+ and K+, thermogravimetric analysis (TGA), derivative thermogravimetric (DTG), and differential scanning calorimetry (DSC) thermograms showed emulgel beads yielded higher thermal stability. The emulgel beads elevated the in vitro bioaccessibility of ACNs under simulated digestion. At the gastric phase, 86 % of ACNs in PBLE, and 46 % of loaded ACNs in hydrogel beads were released, whereas no release was occurred in emulgel beads. At the intestinal phase, after 150 min of digestion, no ACNs were detected in PBLE and hydrogel beads, whereas all emulgel beads continued to release ACNs until 300 min. The incorporation of double emulsions in hydrogel beads can be utilized in the development of functional foods.

Films Based on Biopolymers Incorporated with Active Compounds Encapsulated in Emulsions: Properties and Potential Applications-A Review

The rising consumer demand for safer, healthier, and fresher-like food has led to the emergence of new concepts in food packaging. In addition, the growing concern about environmental issues has increased the search for materials derived from non-petroleum sources and biodegradable options. Thus, active films based on biopolymers loaded with natural active compounds have great potential to be used as food packaging. However, several lipophilic active compounds are difficult to incorporate into aqueous film-forming solutions based on polysaccharides or proteins, and the hydrophilic active compounds require protection against oxidation. One way to incorporate these active compounds into film matrices is to encapsulate them in emulsions, such as microemulsions, nanoemulsions, Pickering emulsions, or double emulsions. However, emulsion characteristics can influence the properties of active films, such as mechanical, barrier, and optical properties. This review addresses the advantages of using emulsions to encapsulate active compounds before their incorporation into biopolymeric matrices, the main characteristics of these emulsions (emulsion type, droplet size, and emulsifier nature), and their influence on active film properties. Furthermore, we review the recent applications of the emulsion-charged active films in food systems.

Polysaccharide-Based Edible Films/Coatings for the Preservation of Meat and Fish Products: Emphasis on Incorporation of Lipid-Based Nanosystems Loaded with Bioactive Compounds

The high water and nutritional contents of meat and fish products make them susceptible to spoilage. Thus, one of the most important challenges faced by the meat industry is extending the shelf life of meat and fish products. In recent years, increasing concerns associated with synthetic compounds on health have limited their application in food formulations. Thus, there is a great need for natural bioactive compounds. Direct use of these compounds in the food industry has faced different obstacles due to their hydrophobic nature, high volatility, and sensitivity to processing and environmental conditions. Nanotechnology is a promising method for overcoming these challenges. Thus, this article aims to review the recent knowledge about the effect of biopolymer-based edible films or coatings on the shelf life of meat and fish products. This study begins by discussing the effect of biopolymer (pectin, alginate, and chitosan) based edible films or coatings on the oxidation stability and microbial growth of meat products. This is followed by an overview of the nano-encapsulation systems (nano-emulsions and nanoliposomes) and the effect of edible films or coatings incorporated with nanosystems on the shelf life of meat and fish products.

Antibacterial and antioxidant properties of phenolic acid grafted chitosan and its application in food preservation: A review

Chitosan is a bio-renewable natural polymeric material. The antibacterial and antioxidant activity of chitosan can be enhanced by grafting with phenolic acids to further expand its application in food. Therefore, this paper focuses on reviewing the structure, antimicrobial and antioxidant activities and their mechanisms with phenolic acid-g-CS, evaluating its cytotoxicity, and describing its application in various food preservation. In general, different reaction mechanisms of phenolic acid-g-CS synthesis lead to different product structures. Compared to chitosan, phenolic acid-g-chitosan exhibited enhanced antibacterial and antioxidant activities. The toxicity assessment showed that phenolic acid-g-CS is not cytotoxic. Moreover, phenolic acid-g-CS has been applied to a variety of food products such as fruits, vegetables and meat with good results. Overall, this review provides a certain reference for subsequent researchers to design phenolic acid-g-CS more rationally and for the subsequent development of phenolic acid-g-CS in food preservation.

Insights into the Edible and Biodegradable Ulvan-Based Films and Coatings for Food Packaging

Recently, edible films or coatings that are made from algal polysaccharides have become promising candidates for replacing plastic-based packaging materials for food storage due to their non-toxic, biodegradable, biocompatible, and bioactive characteristics. Ulvan, a significant biopolymer with unique functional properties derived from marine green algae, has been extensively used in various sectors. However, there are fewer commercial applications of this sugar in the food packaging industry compared to many other algae-derived polysaccharides, such as alginates, carrageenan, and agar. This article aims to review the unparalleled chemical composition/structure and physiochemical properties of ulvan and the latest developments in ulvan-based edible films and coatings, thus highlighting their potential applications in the food packaging industry.

Turmeric carbon quantum dots enhanced chitosan nanocomposite films based on photodynamic inactivation technology for antibacterial food packaging

The increased demand for food quality and safety has led the food industry to pay urgent attention to new packaging materials with antimicrobial activity. In this study, we combined photodynamic inactivation of bactericidal technology in food packaging materials by incorporating fluorescent carbon quantum dots (CDs) prepared from the natural plant turmeric into a chitosan matrix to prepare a series of active composite food packaging films (CDs-CS). The chitosan film containing CDs had better mechanical properties, UV protection and hydrophobicity. Under irradiation with a 405 nm light source, the composite film was able to produce abundant reactive oxygen species, and the CDs-CS₂ film exhibited reductions of approximately 3.19 and 2.05 Log₁₀ CFU/mL for Staphylococcus aureus and Escherichia coli respectively within 40 min. In cold pork storage applications, CDs-CS₂ films showed inhibition of the growth of colonization in pork and retarded the spoilage of pork within 10 days. This work will provide new insights to explore safe and efficient antimicrobial food packaging.

Emulsion-Based Coatings for Preservation of Meat and Related Products

One of the biggest challenges faced by the meat industry is maintaining the freshness of meat while extending its shelf life. Advanced packaging systems and food preservation techniques are highly beneficial in this regard. However, the energy crisis and environmental pollution demand an economically feasible and environmentally sustainable preservation method. Emulsion coatings (ECs) are highly trending in the food packaging industry. Efficiently developed coatings can preserve food, increase nutritional composition, and control antioxidants' release simultaneously. However, their construction has many challenges, especially for meat. Therefore, the following review focuses on the essential aspects of developing ECs for meat. The study begins by classifying emulsions based on composition and particle size, followed by a discussion on the physical properties, such as ingredient separation, rheology, and thermal characteristics. Furthermore, it discusses the lipid and protein oxidation and antimicrobial characteristics of ECs, which are necessary for other aspects to be relevant. Lastly, the review presents the limitations of the literature while discussing the future trends. ECs fabricated with antimicrobial/antioxidant properties present promising results in increasing the shelf life of meat while preserving its sensory aspects. In general, ECs are highly sustainable and effective packaging systems for meat industries.

Characterization of Films Produced with Cross-Linked Cassava Starch and Emulsions of Watermelon Seed Oils

Starches are promising molecules in the production of edible films. However, the hydrophilic nature of these materials is among the main limitations of packaging based on natural polymers. An underexplored alternative is the incorporation of emulsions. This work aimed to produce films based on crosslinked cassava starch with emulsions based on watermelon seed oil (WSO) extracted with pressurized ethanol. The effect of incorporating watermelon seed oil emulsion (WSOE) on the microscopic, structural, mechanical, hydrophilic, and thermal properties of films was analyzed. The internal structure and roughness of the films were significantly affected by increasing WSOE concentration. The WSOE incorporation increased the elongation capacity of the films and reduced the strain at break. WSOE concentrations did not significantly affect the water solubility, permeability, and X-ray diffraction but decreased the wettability of the films. The analysis of the thermal properties showed that the films did not present phase separation in the studied temperature range. Overall, WSOE improved the properties of the films based on cross-linked cassava starch, but it is necessary to optimize the production conditions of the films. These materials may potentially be used as biodegradable food packaging, controlled-release films, and edible coatings in food protection.

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Polymeric Packaging Applications for Seafood Products: Packaging-Deterioration Relevance, Technology and Trends

Seafood is a highly economical product worldwide. Primary modes of deterioration include autolysis, oxidation of protein and lipids, formation of biogenic amines and melanosis, and microbial deterioration. These post-harvest losses can be properly handled if the appropriate packaging technology has been applied. Therefore, it is necessary for packaging deterioration relevance to be clearly understood. This review demonstrates recent polymeric packaging technology for seafood products. Relationship between packaging and quality deterioration, including microbial growth and chemical and biochemical reactions, are discussed. Recent technology and trends in the development of seafood packaging are demonstrated by recent research articles and patents. Development of functional polymers for active packaging is the largest area for seafood applications. Intelligent packaging, modified atmosphere packaging, thermal insulator cartons, as well as the method of removing a fishy aroma have been widely developed and patented to solve the specific and comprehensive quality issues in seafood products. Many active antioxidant and antimicrobial compounds have been found and successfully incorporated with polymers to preserve the quality and monitor the fish freshness. A thermal insulator has also been developed for seafood packaging to preserve its freshness and avoid deterioration by microbial growth and enzymatic activity. Moreover, the enhanced biodegradable tray is also innovative as a single or bulk fish container for marketing and distribution. Accordingly, this review shows emerging polymeric packaging technology for seafood products and the relevance between packaging and seafood qualities.