Comparison of characterization and antioxidant activity of different citrus peel pectins

Cytological and metabolomic analysis of Citrus fruit to elucidate puffing disorder

Puffiness, a physiological disorder commonly observed during the ripening and post-harvest processes of fruits in Citrus reticulata, significantly affects the quality and shelf-life of citrus fruits. The complex array of factors contributing to puffiness has obscured the current understanding of its mechanistic basis. This study examined the puffing index (PI) of 12 citrus varieties at full ripeness, focusing on the albedo layer as a crucial tissue, and investigated the correlation between cellular structural characteristics, key primary metabolites and PI. The findings revealed that the cell gap difference and the number of lipid droplets were closely linked to PI. Chlorogenic acid, Ferulic acid, D-Galacturonic acid, D-Glucuronic acid, (9Z,11E)-Octadecadienoic acid, and 9(10)-EpOME were identified as pivotal primary metabolites for rind puffing. Determination of lignin, protopectin, cellulose and lipoxygenase content further validated the relationship between cell wall, lipid metabolism and rind puffing. This study furnishes novel insights into the mechanisms underlying puffing disorder.

Effect of high-pressure-homogenisation on the interaction between pomegranate peel pectin fractions and anthocyanins in acidic environment

In this study, changes in the basic composition and structural characterisation of water-soluble pectin (WSP), homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) from pomegranate peel were investigated after high-pressure-homogenisation (HPH) at 50 MPa and 300 MPa. The interactions between three pectin and anthocyanin (ACN) complex were also studied. The three pectin fractions were mainly composed of galacturonic acid (34.95%-87.69%), all with low degrees of methyl-esterification ≤41.20%. HPH at 300 MPa increased the binding ratios of ACN to three pectin fractions by 34.22%-34.59%. Changes in the structural characterisation results of pectin confirmed that the depolymerisation and breakdown of the side chains of pectin after HPH promoted electrostatic interactions, hydrogen bond and hydrophobic interaction between pectin and ACN. Correspondingly, the thermal and storage stabilities of ACN in the complex was boosted after HPH at 300 MPa. This study provides insights into the interaction between pectin and ACN under HPH.

Polysaccharides in fruits: Biological activities, structures, and structure-activity relationships and influencing factors-A review

Fruits are a rich source of polysaccharides, and an increasing number of studies have shown that polysaccharides from fruits have a wide range of biological functions. Here, we thoroughly review recent advances in the study of the bioactivities, structures, and structure-activity relationships of fruit polysaccharides, especially highlighting the structure-activity influencing factors such as extraction methods and chemical modifications. Different extraction methods cause differences in the primary structures of polysaccharides, which in turn lead to different polysaccharide biological activities. Differences in the degree of modification, molecular weight, substitution position, and chain conformation caused by chemical modification can all affect the biological activities of fruit polysaccharides. Furthermore, we summarize the applications of fruit polysaccharides in the fields of pharmacy and medicine, foods, cosmetics, and materials. The challenges and perspectives for fruit polysaccharide research are also discussed.

Differential effects of enzymatically modified Ougan (Citrus Suavissima Hort. ex Tanaka) peel pectins extracted with different methods on inhibiting the proliferation of Hela cells

Previous studies have shown that modified citrus pectin (MCP) is an anti-tumor material of food grade. In this study, two enzymatically modified Ougan (Citrus Suavissima Hort. ex Tanaka) peel pectins (EMP1 and EMP2, the ones extracted by alkali and enzymatic methods) were used to investigate their differential effects on viability and physiology of Hela cells. The results showed that EMP1 and EMP2 had 88.00 % and 81.01 % galacturonic acid, 21.31 % and 20.25 % esterification degree, 10,417 g/mol and 6416 g/mol molecular weight (Mw), 82.86 % and 50.62 % RG-I, and 8.91 % and 15.70 % HG, respectively. EMP2 had higher intensities of absorption peaks than EMP1. They were irregularly shaped, with more holes on EMP1 but more wrinkles on EMP2. Both could inhibit the growth, proliferation, migration, and invasion of HeLa cells in a concentration-dependent manner, with better efficiency in EMP2. Meanwhile, EMP2 was more efficient than EMP1 in blocking the cell cycle in S phase, resulting in apoptosis. In conclusion, the variations caused by extraction resulted in differences in anti-tumor activity of MCP and EMP2 with lower Mw and higher HG exhibited better anti-tumor effects. This study would provide an experimental basis and reference for the research and development of anti-tumor supplements from citrus pectin.

Modulating flavanone compound for reducing the bitterness and improving dietary fiber, physicochemical properties, and anti-adipogenesis of green yuzu powder by enzymatic hydrolysis

Yuzu (Citrus junos Sieb.) is a peel-edible fruit with a pleasant aroma, but its bitter taste can impact consumer appeal. In this study, an efficient enzymatic method reduced bitterness in green yuzu powder (GYP). Cellulase KN and naringinase from Aspergillus oryzae NYO-2 significantly decreased naringin and neohesperidin content by over 87 %, while increasing total dietary fiber and soluble dietary fiber by up to 10 % and 51 %, respectively. Insoluble dietary fiber decreased by up to 22 %. Cellulose, hemicellulose, lignin, and pectin contents in enzyme-treated YP decreased by 1.15-2.00-fold, respectively. Enzyme-treated GYP exhibited improved physicochemical properties, including enhanced solubility, oil-holding capacity, and water swelling capacities. 3T3-L1 cells treated with cellulase-treated GYP and naringinase-treated GYP showed lower lipid accumulation and higher lipolysis capability than GYP, along with decreased fatty acid synthase contents. These findings suggest that enzyme-treated GYP holds potential as a functional ingredient in the food industry.

Study on the mechanism of natural polysaccharides on the deastringent effect of Triphala extract

This present study investigated the masking effect of high methoxyl pectin, xanthan gum, and gum Arabic on the astringency of the traditional herbal formula Triphala and further examined the mechanism of polysaccharide reducing astringency. Results of sensory evaluation and electronic tongue illustrated that 0.6 % pectin, 0.3 % xanthan gum, and 2 % gum Arabic had a substantial deastringent effect. The polyphenols in Triphala are basically hydrolysable tannins, which with high degree of gallic acylation may be the main astringent component of Triphala. Moreover, the three polysaccharides can combine with β-casein through CO and NH groups to form soluble binary complexes and decrease the secondary structure of β-casein. When polysaccharides were added to the Triphala-protein system, polyphenol-protein precipitation was also diminished, and they were capable of forming soluble ternary complexes. Consequently, the competition between polysaccharides and polyphenols for binding salivary proteins and the formation of ternary complexes help decrease the astringency of Triphala.

Effect of Organic Acid-Aided Extraction on Characteristics and Functional Properties of Pectin from Cannabis sativa L

The extraction of cannabinoids from the inflorescence and leaves of Cannabis sativa L. is gaining interest from researchers, in addition to addressing the under-utilization of the by-products in the stems and roots of the trees. The present study investigated the recovery of pectin from the left-over parts of hemp tress using an eco-friendly method with the aid of organic acids. Different cannabis cultivars-Chalotte's Angels (CHA) and Hang-Krarog (HKR)-were used as plant materials. The stems of both cannabis cultivars contained more pectin than the roots, and tartaric acid-aided extraction provided higher yields than from citric acid. Extracting the acid solution affected some characteristics, thereby differentiating the functional properties of the derived pectin. Extraction using tartaric acid provided pectin with a higher galacturonic acid content, whereas pectin with a higher methylation degree could be prepared using citric acid. The pectin samples extracted from the stems of CHA (P-CHA) and HKR (P-HKR) had low methoxyl pectin. P-CHA had better free radical scavenging capability, whereas P-HKR showed more potent reducibility. Considering the functional properties, P-CHA showed greater emulsion formability and foaming activity, whereas P-HKR possessed a better thickening effect. The present work suggests the feasible utilization of P-CHA and P-HKR as food additives with bioactivity.

The Emulsification and Stabilization Mechanism of an Oil-in-Water Emulsion Constructed from Tremella Polysaccharide and Citrus Pectin

The objective of this study was to investigate the feasibility of the mixture of tremella polysaccharide (TP) and citrus pectin (CP) as an emulsifier by evaluating its emulsifying ability/stability. The results showed that the TP:CP ratio of 5:5 (w/w) could effectively act as an emulsifier. CP, owing its lower molecular weight and highly methyl esterification, facilitated the emulsification of oil droplets, thereby promoting the dispersion of droplets. Meanwhile, the presence of TP enhanced the viscosity of emulsion system and increased the electrostatic interactions and steric hindrance, therefore hindering the migration of emulsion droplets, reducing emulsion droplets coalesce, and enhancing emulsion stability. The emulsification and stabilization performances were influenced by the molecular weight, esterified carboxyl groups content, and electric charge of TP and CP, and the potential mechanism involved their impact on the buoyant force of droplet size, viscosity, and steric hindrance of emulsion system. The emulsions stabilized by TP-CP exhibited robust environmental tolerance, but demonstrated sensitivity to Ca2+. Conclusively, the study demonstrated the potential application of the mixture of TP and CP as a natural polysaccharide emulsifier.

Konjac glucomannan films incorporated pectin-stabilized Mandarin oil emulsions: Structure, properties, and application in fruit preservation

To enhance the water-resistance and antibacterial properties of KGM films, mandarin oil (MO), was directly emulsified by pectin and then dispersed to the KGM matrix. The effect of MO concentration (0, 0.5, 1.0, 1.5, and 2 wt%) on the performance of the film-forming emulsions as well as the emulsion films was investigated. The results revealed that pectin could encapsulate and protect MO, and KGM as film matrix could further contributed to the high stability of the film-forming emulsions. The FT-IR, XRD, and SEM suggested that MO stabilized by pectin was uniformly distributed in the KGM matrix. The compatibility and good interaction between KGM and pectin contributed to highly dense and compact structure. Furthermore, increasing the concentration of MO effectively improved water-resistance, oxygen barrier, and antimicrobial activity of the KGM based films. The 1.5 wt% MO loaded KGM film had the highest tensile strength (72.22 MPa) and water contact angle (θ = 95.73°), reduced the WVP and oxygen permeability by about 25.8 % and 32.8 times, respectively, prolonged the shelf life of strawberries for 8 days. As demonstrated, the 1.5 wt% MO-loaded KGM film has considerable potential for high-performance natural biodegradable active films to ensure food safety and reduce environmental impacts.

Physicochemical and antioxidant properties of pectin fractions extracted from lemon (Citrus Eureka) peels

Pectin, a natural polysaccharide, holds versatile applications in food and pharmaceuticals. However, there is a need for further exploration into extracting novel functional fractions and characterizing them thoroughly. In this study, a sequential extraction approach was used to obtain three distinct lemon pectin (LP) fractions from lemon peels (Citrus Eureka): LP extracted with sodium acetate (LP-SA), LP extracted with ethylenediaminetetraacetic acid (LP-EDTA), and LP extracted with sodium carbonate and sodium borohydride (LP-SS). Comprehensive analysis revealed low methyl-esterification in all fractions. LP-SA and LP-SS displayed characteristics of rhamnogalacturonan-I type pectin, while LP-EDTA mainly consisted of homogalacturonan pectin. Notably, LP-SA formed self-aggregated particles with rough surfaces, LP-EDTA showed interlocking linear structures with smooth planes, and LP-SS exhibited branch chain structures with smooth surfaces. Bioactivity analysis indicated that LP-SA had significant apparent viscosity and ABTS radical scavenging activity, while both LP-EDTA and LP-SS showed excellent thermal stability according to thermogravimetric analysis (TGA). Furthermore, LP-SS exhibited remarkable gel-forming ability and significant hydroxyl free radicals scavenging activity. In conclusion, this study presents a novel method for extracting various lemon pectin fractions with unique structural and bioactive properties, contributing insights for advanced applications in the food and pharmaceutical sectors.

Evaluation of citrus pectin extraction methods: Synergistic enhancement of pectin's antioxidant capacity and gel properties through combined use of organic acids, ultrasonication, and microwaves

The biological potency of pectin is intricately intertwined with its intricate molecular architecture. The fine structure of pectin is influenced by the extraction method, while the specific impact of these methods on the fine structure and the affected attributes thereof remains enigmatic. This study delves into the profound analysis of eight distinct extraction methods influence on the structure and biological activity of citrus peel pectin. The findings demonstrate that citric acid ultrasound-assisted microwave extraction yields pectin (PectinCA-US/MV) with higher viscosity and a dense, rigid chain. Pectin extracted with acetic acid ultrasound (PectinAA-US) and citric acid ultrasound (PectinCA-US) exhibits elevated galacturonic acid (GalA) levels and reduced D-galactose (Gal) content, enhancing antioxidant activity. Eight pectin-chitosan (CS) hydrogels, especially PectinCA-US/MV-CS, demonstrate commendable thermal stability, rheological properties, self-healing capability, and swelling behavior. This study characterizes citrus peel pectin properties from different extraction methods, laying a foundation for its application in food, pharmaceuticals, and industry.

Comparative Analysis of Physicochemical and Functional Properties of Pectin from Extracted Dragon Fruit Waste by Different Techniques

Dragon fruit peel, often discarded, is a valuable source of commercial pectin. This study investigates different extraction methods, including cold-water (CW), hot-water (HW), ultrasound (US), and novel enzyme extraction (xylanase: EZX), to extract pectins from dragon fruit peel and compare their characteristics. The pectin yield ranged from 10.93% to 20.22%, with significant variations in physicochemical properties across methods (p < 0.05). FTIR analysis revealed that extraction methods did not alter the primary structural configuration of the pectins. However, molecular weights (Mws) varied significantly, from 0.84 to 1.21 × 103 kDa, and the degree of esterification varied from 46.82% to 51.79% (p < 0.05). Monosaccharide analysis identified both homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) pectic configurations in all pectins, predominantly comprising galacturonic acid (77.21-83.12 %mol) and rhamnose (8.11-9.51 %mol), alongside minor side-chain sugars. These properties significantly influenced pectin functionalities. In the aqueous state, a higher Mw impacted viscosity and emulsification performance, while a lower Mw enhanced antioxidant activities and promoted the prebiotic function of pectin (Lactis brevies growth). This study highlights the impact of extraction methods on dragon fruit peel pectin functionalities and their structure-function relationship, providing valuable insights into predicting dragon fruit peel's potential as a food-grade ingredient in various products.

Preparation, Characterization and Application of Active Food Packaging Films Based on Sodium Alginate and Twelve Varieties of Mandarin Peel Powder

The industrial processing of mandarin fruits yields a large amount of peel waste, resulting in economic losses and environmental pollution. The peels of mandarin fruits are a good source of biomass and active substances that can be used to produce food packaging systems. In this study, active food packaging films were prepared based on sodium alginate and twelve varieties of mandarin peel powder. The structures, properties, and corn oil packaging performance of the films were compared. Results showed that the twelve varieties of mandarin peel powder differed in pectin, lipid, protein, crude fiber, and total phenol contents. The prepared films all exhibited a yellow color, 117.73-152.45 μm thickness, 16.39-23.62% moisture content, 26.03-90.75° water contact angle, 5.38-8.31 × 10-11 g m-1 s-1 Pa-1 water vapor permeability, 5.26-12.91 × 10-20 m2 s-1 Pa-1 oxygen permeability, 4.87-7.90 MPa tensile strength, and 13.37-24.62% elongation at break. Notably, the films containing mandarin peel powder with high pectin and lipid contents showed high moisture/oxygen barrier ability and mechanical properties. The films containing mandarin peel powder with high total phenol content exhibited high antioxidant- and antimicrobial-releasing abilities and good performance in delaying corn oil oxidation. Overall, the results suggested that the films have good application potential in active food packaging.

Therapeutic Potential of Pectin and Its Derivatives in Chronic Diseases

Non-communicable diseases (NCDs) are described as a collection of chronic diseases that do not typically develop from an acute infection, have long-term health effects, and frequently require ongoing care and therapy. These diseases include heart disease, stroke, cancer, chronic lung disease, neurological diseases, osteoporosis, mental health disorders, etc. Known synthetic drugs for the treatment or prevention of NCDs become increasingly dangerous over time and pose high risks due to side effects such as hallucination, heart attack, liver failure, etc. As a result, scientists have had to look for other alternatives that are natural products and that are known to be less detrimental and contain useful bioactive compounds. The increasing understanding of the biological and pharmacological significance of carbohydrates has helped to raise awareness of their importance in living systems and medicine, given they play numerous biological roles. For example, pectin has been identified as a class of secondary metabolites found in medicinal plants that may play a significant role in the treatment and management of a variety of NCDs. Pectin is mainly made of homogalacturonan, which is a linear polymer composed primarily of D-galacturonic acid units (at least 65%) linked in a chain by α-(1,4)-glycosidic linkages. There are also modified pectins or derivatives that improve pectin's bioavailability. Pectin is found in the cell walls of higher plants (pteridophytes, angiosperms, and gymnosperms), particularly in the middle lamella of the plant material. Citrus pectin is used in various industries. This article compiles information that has been available for years about the therapeutic importance of pectin in chronic diseases, different modes of pectin extraction, the chemistry of pectin, and the potency of pectin and its derivatives.

Antifatigue effects and antioxidant activity in polysaccharide fractions from Chinese yam bulbils

Polysaccharides are the principal component in Chinese yam (Dioscorea opposita Thunb.) bulbils. The properties and antifatigue of polysaccharides from yam bulbils (PYB) were identified and compared. Their molecular weights (PYB-1 and PYB-2) were approximately 145 and 11 kDa, respectively, with active β-configurations. Meanwhile, the antifatigue activities of PYBs were tested in mice via exhaustive swimming tests (EST). The EST results indicated that PYB-1 and PYB-2 significantly prolonged swimming time in mice (p < .05). Associated with this increase was a rise in hepatic glycogen content and antioxidant enzyme (superoxide dismutase (SOD), glutathione peroxidase (GSH-Px)) activity, along with a decline in blood urea nitrogen, lactic acid, and malondialdehyde levels. The results showed that molecular weight might contribute to the antifatigue effects of PYBs. Additionally, antioxidant tests showed that PYB-1 had stronger free-radical scavenging activity than PYB-2. Taken together, the findings indicated that PYBs exhibited effective antifatigue and antioxidant activities providing additional evidence supporting the use of PYBs as functional food ingredients for relieving fatigue.

Novel edible films fabricated with HG-type pectin extracted from different types of hybrid citrus peels: Effects of pectin composition on film properties

This study investigated the valorization of novel HG-type hybrid citrus pectins derived from three cultivars: Setoka (ST), Kanpei (KP), and Shiranui (SH), and their application as packaging materials. The physicochemical properties of these pectins and their corresponding films were evaluated and compared to commercial citrus pectin. Significant variations were observed in pectin yield (18.15-24.12 %) and other physicochemical characteristics, such as degree of esterification (DE), degree of methoxylation (DM), and monosaccharide composition, among the different cultivars. All hybrid citrus pectins were classified as high-methoxy pectin types (66.67-72.89 %) with typical structural configurations like commercial citrus pectin. However, hybrid citrus pectin films exhibited superior physical properties, including higher mechanical strength, flexibility, and lower water solubility than commercial citrus pectin film, while maintaining similar transparency and moisture content. Additionally, the films displayed smooth and uniform surface morphology, confirming their excellent film-forming properties. Correlation analysis revealed that DE positively influenced mechanical properties (r = 1.0). Furthermore, the monosaccharide composition of pectins showed strong relationships (r = 0.8-1.0) with the film's mechanical and barrier properties. These findings highlight the potential of hybrid citrus pectin as potential packaging material, and the knowledge of the structure-function relationship obtained in this study could be useful for the tailored modification of citrus pectin-based packages.

Influence of pectin and hemicelluloses on physical properties of bacterial cellulose

The properties of bacterial cellulose (BC)-based films produced by in situ biosynthesis with various polysaccharides (water-soluble pectin, arabinan, rhamnogalacturonan I, arabinoxylan, xyloglucan, glucomannan) were investigated. The addition of the polysaccharides to the bacterial growth environment changed the composition of the films by incorporating characteristic monosaccharides. BC-based films contained up to 26.7 % of non-cellulosic polysaccharides. The applied modification had a clear impact on water sorption and caused a decrease in the thermal stability of most BC films, which was connected with the depletion of geometrical dimensions of cellulose nanofibers observed with AFM. The FT-IR and Raman spectra demonstrated a decrease in % Iα of cellulose films, most notably for xyloglucan and glucomannan, as well as a change in their degree of crystallinity and the length of cellulose chains. The addition of xyloglucan had the most pronounced effect on film hardening; the other additives had a similar but lesser effect.

Effect of pulp cell wall polysaccharides on citrus fruit with different mastication traits

Mastication trait is a primary quality attribute of citrus fruit, influencing consumer demands and industrial processing conditions. However, the underlying causes of differences in mastication traits of citrus remain unclear. In this study, microscopy, spectroscopy and diffraction techniques were applied to investigate the physicochemical properties of Hongmeiren (HMR), Satsuma (WM) and Nanfeng tangerine (NF) with superior, moderate and inferior mastication traits, respectively. Ultrastructure indicated that NF had more neatly arranged and regularly shaped cells than HMR and WM. The monosaccharide composition of NF revealed that multi-branched Na2CO3-soluble pectin (NSF) enhanced intercellular adhesion. Additionally, FT-IR analysis revealed more intense vibrations of O2-H····O6 intramolecular hydrogen bonds within NF cellulose, which resulted in a higher crystallinity of cellulose (73.75%) than HMR (32.53%) and WM (43.76%). Overall, the high content and crystallinity of cellulose, the multi-branched NSF and the high content of hemicellulose contributed to the inferior mastication trait of citrus fruit.

Antioxidant potential evaluation of polysaccharides from Camellia oleifera Abel in vitro and in vivo

The extraction process, structural characterization and free radical scavenging ability of polysaccharides from Camellia oleifera have already been widely studied. However, the antioxidant activities are still lack of systematic experiments. In this study, we used Hep G2 cells and Caenorhabditis elegans to evaluate the antioxidant potential of polysaccharides that from C. oleifera flowers (P-CF), leaves (P-CL), seed cakes (P-CC) and fruit shells (P-CS). The results showed all these polysaccharides could protect cells from oxidative damage induced by t-BHP. The highest cell viabilities were 66.46 ± 1.36 % (P-CF), 55.2 ± 2.93 % (P-CL), 54.49 ± 1.29 % (P-CC) and 61.45 ± 1.67 % (P-CS), respectively. Studies have shown that four polysaccharides may protect cells from apoptosis by reducing ROS levels and maintaining MMP balance. Moreover, P-CF, P-CL, P-CC and P-CS increased the survival rate of C. elegans under thermal stress, which reduced the production of ROS by 56.1 ± 0.67 %, 59.37 ± 1.79 %, 16.63 ± 2.51 % and 27.55 ± 2.62 %, respectively. P-CF and P-CL showed stronger protective effects on C. elegans by increasing the nuclear entry rate of DAF-16 and stimulating the expression of SOD-3. Our study suggested that C. oleifera polysaccharides have the potential to develop into a natural supplement agent.

Characterization of soluble dietary fiber from citrus peels (Citrus unshiu), and its antioxidant capacity and beneficial regulating effect on gut microbiota

This study aimed to evaluate the physicochemical, structural and functional properties of soluble dietary fiber extracted from citrus peels (Citrus unshiu) by ultrasound-assisted alkaline extraction. Unpurified soluble dietary fiber (CSDF) was compared with purified soluble dietary fiber (PSDF) in terms of composition, molecular weight, physicochemical properties, antioxidant activity, and intestinal regulatory capacity. Results showed that the molecular weight of soluble dietary fiber was >15 kDa, which showed good shear thinning characteristics and belonged to non-Newtonian fluid. The soluble dietary fiber showed good thermal stability under 200 °C. The contents of total sugar, arabinose and sulfate in PSDF were higher than those in CSDF. At the same concentration, PSDF showed stronger free radical scavenging ability. In fermentation model experiments, PSDF promoted the production of propionic acid and increased the abundance of Bacteroides. These findings suggested that soluble dietary fiber extracted by the ultrasound-assisted alkaline extraction has good antioxidant capacity and promotes intestinal health. It has broad development space in the field of functional food ingredients.

Structural characteristics, functional properties, antioxidant and hypoglycemic activities of pectins from feijoa (Acca sellowiana) peel

The structure characteristics, functional properties, antioxidant and hypoglycemic activities of pectins extracted from feijoa peel with water (FP-W), acid (FP-A) and alkali (FP-B) were investigated. Results showed that the feijoa peel pectins (FPs) were mainly composed of galacturonic acid, arabinose, galactose and rhamnose. FP-W and FP-A had higher proportion of homogalacturonan domain, degree of esterification and molecular weight (for main component) than FP-B; FP-B owned the highest yield, protein and polyphenol contents. FP-W had a compact and smooth surface morphology unlike FP-A and FP-B. FP-W and FP-A had better thermal stability than FP-B. The rheological analysis suggested that the FPs exhibited pseudoplastic fluid behavior, and the elastic characteristics were dominant. Results showed that FP-W and FP-B had superior antioxidant and hypoglycemic activities than FP-A. According to correlation analysis, monosaccharide composition, sugar ratios and degree of acetylation were chief factors affecting the functional properties, antioxidant and hypoglycemic activities of the FPs.

Fabrication of Pickering emulsions stabilized by citrus pectin modified with β-cyclodextrin and its application in 3D printing

Pickering emulsions stabilized by polysaccharide particles have received increasing attention because of their potential applications in three-dimensional (3D) printing. In this study, the citrus pectins (citrus tachibana, shaddock, lemon, orange) modified with β-cyclodextrin (β-CD) were used to stabilize Pickering emulsions reaching the requirements of 3D printing. In terms of pectin chemical structure, the steric hindrance provided by the RG I regions was more conducive to the stability of the complex particles. The modification of pectin by β-CD provided the complexes a better double wettability (91.14 ± 0.14°-109.43 ± 0.22°) and a more negative ζ-potential, which was more beneficial for complexes to anchor at oil-water interface. In addition, the rheological properties, texture properties and stability of the emulsions were more responsive to the ratios of pectin/β-CD (R_β/C). The results showed that the emulsions stabilized at a φ = 65 % and a R_β/C = 2:2 achieved the requirements (shear thinning behavior, self-supporting ability, and stability) of 3D printing. Furthermore, the application in 3D printing demonstrated that the emulsions under the optimal condition (φ = 65 % and R_β/C = 2:2) displayed excellent printing appearance, especially for the emulsions stabilized by β-CD/LP particles. This study provides a basis for the selection of polysaccharide-based particles to prepare 3D printing inks which may be utilized in food manufacturing.

Effect of different NaCl concentration on the structure-function relationship of citrus peel pectins modified by electrochemistry

In this study, the modified citrus peel pectins (CPPs) were successfully produced by electrochemistry with varying NaCl concentrations of 0, 0.01 % and 0.1 % w/v using an H-type cell at 40 mA current. After 4 h, the pH and oxidation-reduction potential (ORP) of oxidized CPP solution in the anodic region were 2.00- 2.52 and 371.17- 564.45 mV, respectively, due to the electrolysis of water, whereas those of reduced CPP solution in cathodic region were 9.46- 10.84 and - 202.77 ~ -230.57 mV. The modified CPPs in the anodic region (A-0, A-0.01, and A-0.1) exhibited significantly higher weight-average molecular weights and methyl esterification degrees than those in the cathodic region (C-0, C-0.01 and C-0.1). In contrast, the K⁺, Mg²⁺, and Ca²⁺ contents of A-0, A-0.01, and A-0.1 were lower than those of C-0, C-0.01 and C-0.1 due to the electrophoretic migration. Furthermore, the antioxidant activities of A-0 and A-0.01 solutions were stronger than those of the C-0, C-0.01, and C-0.1, while rheological and texture properties of their hydrogels showed contradictory results. Finally, the potential structure-function relationships of CPPs were explored by combining PCA and correlation analysis. Overall, this study introduced a potential approach for pectin purification and functional low-methoxyl pectin manufacturing.

Bio-adhesive and ROS-scavenging hydrogel microspheres for targeted ulcerative colitis therapy

Ulcerative colitis (UC) as an important type of inflammatory bowel disease is a chronic disease characterized by intestinal dyshomeostasis. The UC treatment is challenged by the insufficiency of drug delivery and retention. Herein, we fabricated an intrarectal formulation of olsalazine (Olsa)-loaded hydrogel microspheres (LDKT/Olsa) with good bio-adhesiveness and reactive oxygen species (ROS)-scavenging ability to enhance drug retention and therapeutic effect. Low methoxy pectin-dopamine conjugate/konjac glucomannan composite hydrogel microspheres (LDKT) with a size ranging from 10 to 100 μm were prepared by using Zn²⁺ and ROS-sensitive thioketal as crosslinkers. Upon intrarectal administration, the negatively charged and dopamine-functionalized hydrogel microspheres efficiently adhered to cationic surface of inflammatory mucosa, scavenging ROS and releasing Zn²⁺ and Olsa for antibacterial and anti-inflammatory effects. In the dextran sodium sulfate (DSS)-induced mouse UC model, the microspheres significantly reduced the levels of colonic ROS and pro-inflammatory cytokines, improved gut mucosal barrier integrity, and remarkably relieved colitis. Overall, the LDKT microspheres are promising carriers to deliver drugs for UC treatment.

Structure and potential anti-fatigue mechanism of polysaccharides from Bupleurum chinense DC

Two polysaccharides, BCP-1 and BCP-2, were obtained from Bupleurum chinense DC. by water extraction and ultrafiltration. BCP-1 (1.04 × 10⁵ Da) and BCP-2 (2.14 × 10⁴ Da) were composed of Mannose, Rhamnose, Glucose, Galactose, Arabinose, and Galacturonic acid in different proportions. They both contained oligogalacturonides in their main chain. Besides, the backbone of BCP-1 was composed of 4-β-Galp and 4,6-β-Glcp, and branched at C4 of 4,6-β-Glcp. While BCP-2 contained a backbone of 3,5-α-Araf residues with branches at C3. BCP-2 effectively extended the forced swimming time, improved the glycogen reserves and antioxidant system, decreased the levels of blood urea nitrogen, lactic acid, lactate dehydrogenase and creatinine kinase expression. It alleviated physical fatigue through regulating 5'-AMP-activated protein kinase (AMPK) and Nuclear Factor erythroid 2-Related Factor 2 (Nrf2) signalling pathway in skeletal muscles. This study demonstrated that BCP-2 exhibited more effective anti-fatigue activity than BCP-1 potentially associated with its primary and higher structures.

Phyto-Assisted Synthesis of Nanoselenium-Surface Modification and Stabilization by Polyphenols and Pectins Derived from Agricultural Wastes

Raw and purified mandarin peel-derived pectins were characterized and combined with olive pomace extract (OPE) in the green synthesis of selenium nanoparticles (SeNPs). SeNPs were characterized in terms of size distribution and zeta potential, and their stability was monitored during 30 days of storage. HepG2 and Caco-2 cell models were used for the assessment of biocompatibility, while antioxidant activity was investigated by the combination of chemical and cellular-based assays. SeNP average diameters ranged from 171.3 nm up to 216.9 nm; smaller SeNPs were obtained by the utilization of purified pectins, and functionalization with OPE slightly increased the average. At concentrations of 15 mg/L SeNPs were found to be biocompatible, and their toxicity was significantly lower in comparison to inorganic selenium forms. Functionalization of SeNPs with OPE increased their antioxidant activity in chemical models. The effect was not clear in cell-based models, even though all investigated SeNPs improved cell viability and protected intracellular reduced GSH under induced oxidative stress conditions in both investigated cell lines. Exposure of cell lines to SeNPs did not prevent ROS formation after exposure to prooxidant, probably due to low transepithelial permeability. Future studies should focus on further improving the bioavailability/permeability of SeNPs and enhancing the utilization of easily available secondary raw materials in the process of phyto-mediated SeNP synthesis.

Influences of Ultrasonic Treatments on the Structure and Antioxidant Properties of Sugar Beet Pectin

The objective of this study was to explore the structural changes and oxidation resistance of ultrasonic degradation products of sugar beet pectin (SBP). The changes in the structures and antioxidant activity between SBP and its degradation products were compared. As the ultrasonic treatment time increased, the content of α-D-1,4-galacturonic acid (GalA) also increased, to 68.28%. In addition, the neutral sugar (NS) content, esterification degree (DE), particle size, intrinsic viscosity and viscosity-average molecular weight (M_V) of the modified SBP decreased. Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to study the degradation of the SBP structure after ultrasonication. After ultrasonic treatment, the DPPH and ABTS free radical scavenging activities of the modified SBP reached 67.84% and 54.67% at the concentration of 4 mg/mL, respectively, and the thermal stability of modified SBP was also improved. All of the results indicate that the ultrasonic technology is an environmentally friendly, simple, and effective strategy to improve the antioxidant capacity of SBP.

Optimization of Extraction Process, Structure Characterization, and Antioxidant Activity of Polysaccharides from Different Parts of Camellia oleifera Abel

The flowers, leaves, seed cakes and fruit shells of Camellia oleifera are rich in bioactive polysaccharides, which can be used as additives in food and other industries. In this study, a Box-Behnken design was used to optimize the extraction conditions of polysaccharides from C. oleifera flowers (P-CF), leaves (P-CL), seed cakes (P-CC), and fruit shells (P-CS). Under the optimized extraction conditions, the polysaccharide yields of the four polysaccharides were 9.32% ± 0.11 (P-CF), 7.57% ± 0.11 (P-CL), 8.69% ± 0.16 (P-CC), and 7.25% ± 0.07 (P-CS), respectively. Polysaccharides were mainly composed of mannose, rhamnose, galacturonic acid, glucose, galactose, and xylose, of which the molecular weights ranged from 3.31 kDa to 128.06 kDa. P-CC had a triple helix structure. The antioxidant activities of the four polysaccharides were determined by Fe2+ chelating and free radical scavenging abilities. The results showed that all polysaccharides had antioxidant effects. Among them, P-CF had the strongest antioxidant activity, of which the highest scavenging ability of DPPH•, ABTS•+, and hydroxyl radical could reach 84.19% ± 2.65, 94.8% ± 0.22, and 79.97% ± 3.04, respectively, and the best chelating ability of Fe2+ could reach 44.67% ± 1.04. Overall, polysaccharides extracted from different parts of C. oleifera showed a certain antioxidant effect, and could be developed as a new type of pure natural antioxidant for food.

Extraction and characterization of a pectin from sea buckthorn peel

Sea buckthorn peel is the by-product of the sea buckthorn processing, which contains many bioactive compounds. In this paper, sea buckthorn high methoxyl pectin (SBHMP) was obtained, with a yield of 8% and a light-colored. The SBHMP was a high methoxyl with a degree of esterification of 57.75% and uronic acid content of 65.35%. The structural and morphological characterization of SBHMP were analyzed by high-performance liquid chromatography, Fourier-transform infrared spectroscopy, and scanning electron microscopy. Results showed that SBHMP presented a sheet and layered stacked morphological, and was mainly composed of galacturonic acid, arabinose, galactose, rhamnose, and mannose, which indicated that SBHMP mainly consisted of homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) type pectin polysaccharides. In addition, SBHMP also presented significant gel, thickening, and emulsifying properties. The results exhibited that SBHMP could form jelly-like gels under acid and high sucrose conditions, presenting a shear-thinning behavior and increasing apparent viscosity with the enhancement of pectin and sucrose contents. Besides, SBHMP could form oil-in-water emulsions with pectin concentrations of 1.0–3.0%. When the SBHMP concentrations were 2.0 and 3.0%, the emulsions were stable during 7 days of storage. Findings in this paper demonstrated the potential of SBHMP to be a food thickener and emulsifier and support the in-depth utilization of sea buckthorn by-products.

Transcriptome analyses reveal the potential mechanisms for color changes of a sweet orange peel induced by Candidatus Liberibacter asiaticus

'Shatangju' mandarin (Citrus reticulate Blanco cv. Shatangju) is a Chinese citrus specialty in southern China with a delicious taste and an attractive appearance. Huanglongbing (HLB) caused by Candidatus Liberibacter asiaticus (CLas) threatens the Shatangju industry seriously. Fruits from citrus trees with HLB show 'red nose' peels with a serious reduction in fruit value. Differentially expressed genes (DEGs) have been identified in the leaves of several citrus species with HLB infection. However, similar studies on the fruit peels of citrus trees with HLB infection are very limited. In this study, the pathogen CLas was diagnosed in the 'red nose' fruit peels of Shatangju. The chlorophyll and carotenoid contents in different peels were also analyzed. Besides, we identified DEGs in the comparison between peels from normal red-colored and 'red nose' fruits via RNA-seq. A total of 1922 unigenes were identified as DEGs, of which 434 were up-regulated and 1488 were down-regulated in the 'red nose' fruit peels. DEGs involved in chlorophyll and carotenoids biosynthesis, photosynthesis, and transcription factors could be responsible for fruit color changes after HLB infection. Our findings provide a preliminary understanding of the mechanism underlying the formation of a 'red nose' on fruit peel from HLB-infected trees.