Crayfish protein isolated gels. A study of pH influence

Based on hydrogen and disulfide-mediated bonds, l-lysine and l-arginine enhanced the gel properties of low-salt mixed shrimp surimi (Antarctic krill and Pacific white shrimp)

This study delved into the effects of l-lysine (Lys) and l-arginine (Arg) on the gel properties and intermolecular interactions of low-salt (NaCl, 1 g/100 g) mixed shrimp surimi (Antarctic krill and Pacific white shrimp). The addition of Lys and Arg improved the gel strength and water holding capacity of low-salt gels, which were superior to the properties of STPP and high-salt (NaCl, 2.25 g/100 g) gels. These results can be attributed to the role of Lys and Arg in enhancing hydrogen and disulfide bonds within the low-salt gel system, promoting the solubilization of myofibrillar proteins (MP) and consequently increasing the number of MP molecules participating in gel formation. Antarctic krill MP did not show gel-forming ability and exerted a diluting effect on low-salt mixed shrimp surimi gels. Molecular docking analysis indicated the stable binding of Lys and Arg to myosin.

Effects of high hydrostatic pressure on peelability and quality of crayfish(Procambarus clarkii)

BACKGROUND

Peeling of crayfish is a very important process in production. Crayfish peeling by machine can increase production efficiency and enhance safety in the production process. The tight muscle-shell attachment causes difficulty in peeling freshly caught crayfish. However, few studies have explored the changes in crayfish quality under favorable shell-loosening treatments.

RESULTS

In this study, the shell-loosening properties of crayfish and changes in crayfish quality, microstructure and protein fluorescent features were investigated after high hydrostatic pressure (HHP) treatment. New methods were established to measure the peeling performance of crayfish, which are peelability and meat yield rate (MYR). The normalization of peelability and MYR were verified by different weights of crayfish tails and different treatments. The peeling effect of HHP-treated crayfish was evaluated by a new quantitative measurement method, and MYR was calculated. The results showed that all the HHP treatments reduced crayfish peeling work and increased MYR. The HHP treatment provided better crayfish quality in terms of texture and color and enlarged the shell-loosening gap. Among all HHP treatments, 200 MPa treatment exhibited lower peeling work, higher MYR and an expansion of the shell-loosening gap, reaching up to 573.8 μm. At the same time, 200 MPa treatment could maintain crayfish quality.

CONCLUSION

The findings outlined above suggest that high pressure is a promising method for loosening crayfish shells. 200 MPa is an optimal HHP treatment condition for crayfish peeling, exhibiting a promising application in industrial processing. © 2023 Society of Chemical Industry.

Quantitative proteomics insights into gel properties changes of myofibrillar protein from Procambarus clarkii under cold stress

The impacts of cold stress (4 ℃ for 0 h, 12 h, 24 h, 36 h and 48 h, respectively) on the components, structural and physical properties of myofibrillar protein (MP) gel from Procambarus clarkii were investigated. The physicochemical analysis indicated the secondary and tertiary structure of MP were unfolding to different degrees after cold stress when compared to the control. The MP gel hardness reached a maximum when the cold stress reached 24 h. Furthermore, the quantitative proteomics results indicated that 20 up-regulated differentially abundant proteins (DAPs) were detected in 24 h when compared to control, specifically include myosin light chain 1 (MLC1) and skeletal muscle actin 6. Additionally, the combined analysis confirmed that MLC1 and skeletal muscle actin 6 might play key roles in hardening shrimp meat under cold stress. The results could provide a theoretical reference for the changes in crayfish muscle quality during cold chain transportation.

Trace the difference driven by unfolding-refolding pathway of myofibrillar protein: Emphasizing the changes on structural and emulsion properties

The effective strategy of pH-shifting to improve the emulsifying properties of myofibrillar proteins (MPs) extracted from pale, soft and exudative (PSE)-like chicken was investigated. To determine the mechanism of improvement, changes on structural and physicochemical properties were clarified by tracing the difference driven by unfolding-refolding process. According to the results of tryptophan fluorescence intensity and circular dichroism spectroscopy, it is found that unfolding-refolding process markedly changed MPs secondary and tertiary structure. The atomic force microscopy images showed MPs appeared to have fibrous-like appearance at pH 7.0, however, exhibited as spherical shape after pH-shifting. Both emulsifying activity index and emulsifying stability index increased after pH-shifting. These results systematically illustrated the changes on structural and emulsion properties of MPs during unfolding-refolding process. It proved that the strategy pH 11.0-7.0 could more effectively promote MPs emulsifying properties, whose mechanism was simultaneously the transformation in MPs structure and potentially formation of highly-soluble particle.

Physicochemical characteristics of surimi-like material made from the muscle tissues of freshwater mussels (Sinanodonta woodiana Lea, 1834)

The aim of the study was to determine selected characteristics of surimi-like material (SLM) made from the muscle tissues of Sinanodonta woodiana (Lea, 1834) freshwater mussels. The research material consisted of unwashed mussel muscle homogenate as the control sample—C, mussel muscle tissue twice washed with water (SLM-W) and sample washed with NaCl at a concentration of 0.169 mol/L as well as water (SLM–S). A raw control sample and surimi like-materials were analysed using the SDS-PAGE technique. They were also tested using the DMTA method (dynamic mechanical thermal analysis) while heating the samples up to 80 °C and cooling to 20 °C. The thermal drip and texture of gels after heating (75 °C, 30 min) were also determined. The washing procedure had a significant impact on the protein composition of the SLMs. A significantly (p < 0.05) higher percentage of proteins with molecular weights of 270–273 kDa and 105–110 kDa (corresponding to specific filamin isoforms), as well as 42–43 kDa (corresponding to actin), were found in the SLMs compared to sample C. Ccorrelation analysis confirmed a strong positive relationship between the percentage share of the above proteins and the values of the elasticity modulus (r ≥ 0.84) and firmness (r ≥ 0.88) of SLM gels. The SLM-S sample was characterised by the lowest significant (p < 0.05) thermal drip values. During heating, the rheological traits of all samples changed at two stages: from 20 to 50 °C and over 50 °C. The highest dynamics of variation in the elasticity modulus (G′) value were noticed at temperatures exceeding 50 °C in all samples. The G′ values in the SLM samples were significantly greater than the values in sample C. The analysis revealed a strong correlation (r ≥ 0.81) between the determinants of the texture of the SLM samples and their rheological parameters. Sample SLM-W was the one with the highest firmness and elasticity values. The analysis showed that the textural properties of the SLM samples mainly resulted from the reaction of spatial matrices to mechanical interactions.

Effect of pH and heating conditions on the properties of Alaska pollock (Theragra chalcogramma) surimi gel fortified with fish oil

To improve the quality and functionality of emulsified surimi gels, the effect of pH and heating conditions on the properties of surimi gel fortified with fish oil was investigated. Results showed that pH conditions influenced the solubility and emulsifying properties of surimi proteins and that the gel properties were associated with the protein properties. Under direct heating, the highest gel strength was achieved at pH 8.0, in which condition the solubility was significantly higher than others. Higher emulsifying stability resulted in enhanced gel strength relative to that of the control group. However, the changes in the gel strength were not consistent under two-step heating. In addition, the expressible moisture and oil content were found to vary depending on the pH values under both heating conditions. The corresponding changes in expressible moisture and oil content could be attributed to the high protein solubility and emulsifying properties of surimi proteins. Analysis of the dynamic rheological properties of the resulting surimi paste revealed that the gelation properties varied depending on the pH conditions during the heating process. In addition, the temperatures of myosin cross-linking changed according to the structure of surimi proteins, which in turn varied depending on the pH conditions. PRACTICAL APPLICATIONS: To improve the functionality of surimi-based product, the fish oil was added to prepare surimi gel. pH and heating conditions play important roles in the gelation of fish proteins. Therefore, this study investigated the effect of combined pH and heating condition on the property of surimi gel fortified with fish oil. The emulsified surimi gel with fine texture was obtained at pH of 8-8.5; moreover, heating conditions (direct heating and two-step heating) also influenced texture of emulsified surimi gel. These results provide the evidence to produce the emulsified surimi-based product with the high gel strength, water- and oil-holding capacity.

Development of crayfish bio-based plastic materials processed by small-scale injection moulding

BACKGROUND

Protein has been investigated as a source for biodegradable polymeric materials. This work evaluates the development of plastic materials based on crayfish and glycerol blends, processed by injection moulding, as a fully biodegradable alternative to conventional polymer-based plastics. The effect of different additives, namely sodium sulfite or bisulfite as reducing agents, urea as denaturing agent and L-cysteine as cross-linking agent, is also analysed.

RESULTS

The incorporation of any additive always yields an increase in energy efficiency at the mixing stage, but its effect on the mechanical properties of the bioplastics is not so clear, and even dampened. The additive developing a greater effect is L-cysteine, showing higher Young's modulus values and exhibiting a remnant thermosetting potential. Thus, processing at higher temperature yields a remarkable increase in extensibility.

CONCLUSION

This work illustrates the feasibility of crayfish-based green biodegradable plastics, thereby contributing to the search for potential value-added applications for this by-product.