The functional and nutritional aspects of hydrocolloids in foods

Exopolysaccharide from marine microalgae belonging to the Glossomastix genus: fragile gel behavior and suspension stability

With the aim to find new polysaccharides of rheological interest with innovated properties, rhamnofucans produced as exopolysaccharides (EPS) in a photobioreactor (PBR) and an airlift bioreactor (ABR) by the marine microalgae Glossomastix sp. RCC3707 and RCC3688 were fully studied. Chemical characterizations have been conducted (UHPLC - MS HR). Analyses by size-exclusion chromatography (SEC) coupled online with a multiangle light scattering detector (MALS) and a differential refractive index detector showed the presence of large structures with molar masses higher than 106 g.mol-1. The rheological studies of these EPS solutions, conducted at different concentrations and salinities, have evidenced interesting and rare behavior characteristic of weak and fragile hydrogels i.e. gel behavior with very low elastic moduli (between 10-2 and 10 Pa) and yield stresses (between 10-2 and 2 Pa) according to the EPS source, concentration, and salinity. These results were confirmed by diffusing wave spectroscopy. Finally, as one of potential application, solutions of EPS from Glossomastix sp. have evidenced very good properties as anti-settling stabilizers, using microcrystalline cellulose particles as model, studied by multiple light scattering (MLS) with utilization in cosmetic or food industry. Compared to alginate solution with same viscosity for which sedimentation is observed over few hours, microalgae EPS leads to a stable suspension over few days.

Recent insights into bonding technologies in restructured meat production: A review

Restructuring meat products is one way of improving material utilization and economic efficiency. In this process of combining meat pieces or granules to form larger pieces of meat, the additives and processing techniques employed in bonding the restructured meat play crucial roles in the formation of the structure and appearance of the meat while simultaneously reducing nutrient and water loss and enhancing flavor. This study reviews the adhesives commonly used in meat recombination technology, including transglutaminase, glucono-delta-lactone, fibrin, gelatin, and gel emulsifiers such as hydrophilic colloid, phosphate, starch, and cellulose. Additionally, processing technologies such as high-pressure, ultrasonic, vacuum-assisted, microwave, and three-dimensional printing are discussed, with emphasis on their principles, properties, functionalities, and safety. The study further summarizes the application and research progress of various bonding techniques in restructured meat. It analyzes the advantages, challenges, and development prospects of these techniques to provide support for further research in this field.

Advances in the study of the biological activity of polysaccharide-based carbon dots: A review

Carbon dots have attracted worldwide interest due to their customizable nature, luminescent properties, and exceptional biocompatibility. In particular, biomass-derived carbon dots have attracted attention for their environmentally friendly and cost-effective synthesis. Recent research looks into how polysaccharides can be used to make carbon dots. Using them as starting materials for nanomaterials has benefits in terms of structure, morphology, and doping elements. Although research has extensively examined the optical properties of carbon dots, their potential biological applications have not been thoroughly investigated. This review mainly summarises the cytotoxicity and biological functions of polysaccharide-based carbon dots (e.g. agar, alginate, cellulose, carrageenan, chitosan, chitosan, starch, gelatin, etc.), such as antioxidant, antibacterial and anti-tumor functions, highlighting the different scenarios of the methods of preparation of carbon dots. The applications of carbon dots in food, biomedical sciences, soil fertilization, and power generation are highlighted by reviewing the low toxicity of carbon dots with safety and biocompatibility in human contact. Finally, the importance and challenges of polysaccharide-based carbon dots and the prospects and research directions of polysaccharide-based carbon dots are explained by comparing them with other nanomaterials.

Development of a plant-based dessert using araticum pulp and chickpea extract: Physicochemical, microbiological, antioxidant, and sensory characterization

The demand for plant-based products has increased in recent years, due to several aspects related to health and environmental consciousness. This study aimed to produce and characterize a plant-based dairy alternative dessert based on araticum pulp and chickpea extract without added sugar and fat. Three formulations were prepared: Formulation 1 (F1): 20% araticum pulp + 80% chickpea extract; Formulation 2 (F2): 30% araticum pulp + 70% chickpea extract; and Formulation 3 (F3): 40% araticum pulp + 60% chickpea extract. All formulations' chemical composition, sensorial characteristics, viscosity, total phenolic content, antioxidant activity, and microbiological stability were analyzed during 28 days of storage at 4°C and a relative humidity of 23%. Energetic value ranged from 64 to 71 kcal/100g, and carbohydrate content from 9.68 to 11.06, protein from 3.38 to 3.04, lipids from 1.41 to 1.60, ashes from 0.53 to 0.59 and crude fiber from 0.86 to 1.34 g/100g among the formulations. The increase in the proportion of araticum pulp in the formulations reduced moisture content by 1.2 to 2.1% (F1: 84.2, F2: 83.2, and F3: 82.4), protein content by 3 to 9% (F1: 3.3, F2: 3.2, and F3: 3.0), and pH value by 5.8 to 10.7% (F1: 5.50, F2: 5.18, and F3: 4.91), and increased the TSS by 1.1 to 1.3-fold (F1: 8.36, F2: 8.98, and F3: 10.63 º Brix), total phenolics content by 1.5 to 2.0-fold (F1: 4,677, F2: 6,943, and F3: 10,112 gallic acid μmol/L) and antioxidant activity by 1.8 to 2.8-fold (F1: 1,974, F2: 3,664, and F3: 5.523). During the 28 days of storage at 4°C, the formulations F1 and F2 showed better stability of phenolic compounds and antioxidant activity; however, the formulation F3 showed acceptable microbiological quality up to 28 days of storage, higher viscosity, 8 to 16-fold higher than the formulations F1 and F2, respectively (F1: 238.90, F2: 474.30, and F3:3,959.77 mPa.s), antioxidant capacity and better scores in sensory analysis. The present study showed that the plant-based dessert elaborated with araticum pulp and chickpea extract might be considered a potential dairy alternative product with high antioxidant activity, protein content, and a viscosity similar to yogurt; however, its sensory aspects need improvement.

Hydrocolloid-based fruit fillings: A comprehensive review on formulation, techno-functional properties, synergistic mechanisms, and applications

This study offers a comprehensive review of current developments regarding the utilization of diverse hydrocolloids in formulating fruit fillings across different fruit types, their impact on textural attributes, rheological properties, thermal stability, syneresis, and nutritional advantages of fillings and optimization of its characteristics to align with consumer preferences. The review also focuses on the various factors influencing fruit fillings, including the selection of fruits, processing methodologies, the inherent nature and concentration of hydrocolloids, and their synergistic interactions. In depth, scientific work on the impact of the parameters such as pH, total soluble solids, and sugar content within the fruit fillings was also discussed. Additionally, this article focuses on the utilization of the diverse fruit fillings developed by using hydrocolloids in bakery products including pastry, tartlet, muffins, cookies, and so forth. The review establishes that hydrocolloids offer a spectrum of techno-functional attributes conducive to strengthening both the structural and thermal stability of fruit fillings, consequently extending their shelf life. It further establishes that incorporating of hydrocolloids facilitates the development of healthier food products by mitigating the necessity of excessive sugar or various other less favorable ingredients. The incorporation of fruit fillings in bakery products significantly increases the value proposition of these baked goods, contributing to their overall enhancement of quality and sensory value.

Chemically modified seaweed polysaccharides: Improved functional and biological properties and prospective in food applications

Seaweed polysaccharides are natural biomacromolecules with unique physicochemical properties (e.g., good gelling, emulsifying, and film-forming properties) and diverse biological activities (e.g., anticoagulant, antioxidant, immunoregulatory, and antitumor effects). Furthermore, they are nontoxic, biocompatible and biodegradable, and abundant in resources. Therefore, they have been widely utilized in food, cosmetics, and pharmaceutical industries. However, their properties and bioactivities sometimes are not satisfactory for some purposes. Modification of polysaccharides can impart the amphiphilicity and new functions to the biopolymers and change the structure and conformation, thus effectively improving their functional properties and biological activities so as to meet the requirement for targeted applications. This review outlined the modification methods of representative red algae polysaccharides (carrageenan and agar), brown algae polysaccharides (fucoidan, alginate, and laminaran), and green algae polysaccharides (ulvan) that have potential food applications, including etherification, esterification, degradation, sulfation, phosphorylation, selenylation, and so on. The improved functional properties and bioactivities of the modified seaweed polysaccharides and their potential food applications are also summarized.

Innovation in precision fermentation for food ingredients

A transformation in our food production system is being enabled by the convergence of advances in genome-based technologies and traditional fermentation. Science at the intersection of synthetic biology, fermentation, downstream processing for product recovery, and food science is needed to support technology development for the production of fermentation-derived food ingredients. The business and markets for fermentation-derived ingredients, including policy and regulations are discussed. A patent landscape of fermentation for the production of alternative proteins, lipids and carbohydrates for the food industry is provided. The science relating to strain engineering, fermentation, downstream processing, and food ingredient functionality that underpins developments in precision fermentation for the production of proteins, fats and oligosaccharides is examined. The production of sustainably-produced precision fermentation-derived ingredients and their introduction into the market require a transdisciplinary approach with multistakeholder engagement. Successful innovation in fermentation-derived ingredients will help feed the world more sustainably.

Converting Bulk Sugars into Functional Fibers: Discovery and Application of a Thermostable β-1,3-Oligoglucan Phosphorylase

Despite their broad application potential, the widespread use of β-1,3-glucans has been hampered by the high cost and heterogeneity associated with current production methods. To address this challenge, scalable and economically viable processes are needed for the production of β-1,3-glucans with tailorable molecular mass distributions. Glycoside phosphorylases have shown to be promising catalysts for the bottom-up synthesis of β-1,3-(oligo)glucans since they combine strict regioselectivity with a cheap donor substrate (i.e., α-glucose 1-phosphate). However, the need for an expensive priming substrate (e.g., laminaribiose) and the tendency to produce shorter oligosaccharides still form major bottlenecks. Here, we report the discovery and application of a thermostable β-1,3-oligoglucan phosphorylase originating from Anaerolinea thermophila (AtβOGP). This enzyme combines a superior catalytic efficiency toward glucose as a priming substrate, high thermostability, and the ability to synthesize high molecular mass β-1,3-glucans up to DP 75. Coupling of AtβOGP with a thermostable variant of Bifidobacterium adolescentis sucrose phosphorylase enabled the efficient production of tailorable β-1,3-(oligo)glucans from sucrose, with a near-complete conversion of >99 mol %. This cost-efficient process for the conversion of renewable bulk sugar into β-1,3-(oligo)glucans should facilitate the widespread application of these versatile functional fibers across various industries.

Effect of Different Hydrocolloids on the Qualitative Characteristics of Fermented Gluten-Free Quinoa Dough and Bread

The aim of this research was to optimize the production process of fermented gluten-free quinoa bread. To this end, the effect of different hydrocolloids on the technological, fermentative, and nutritional properties of quinoa-based gluten-free doughs and breads was evaluated. For this purpose, 3% of four different hydrocolloids (sodium alginate, k-carrageenan, xanthan gum, and hydroxypropyl methylcellulose (HPMC)) were used in gluten-free doughs composed of 50% quinoa flour, 20% rice flour, and 30% potato starch. The rheological and fermentative properties of the doughs were evaluated, as well as the chemical composition, specific volume, crust and crumb color, and alveolar structure profile of gluten-free breads. The results highlighted the differences in dough rheology during mixing and fermentation of the doughs. In particular, HPMC showed a good gas retention (93%) during the fermentation of quinoa dough by registering the highest maximum dough development height (Hm). The gluten-free quinoa breads obtained were characterized by significantly different quality parameters (p < 0.05). The use of 3% HPMC resulted in breads with the lowest baking loss, the highest volume, and the most open crumb structure.

Food Hydrocolloids: Structure, Properties, and Applications

Hydrocolloids are extensively used in the food industry for various functions, including gelling, thickening, stabilizing foams, emulsions, and dispersions, as well as facilitating the controlled release of flavor [...].

Thermophilic β-mannanases from bacteria: production, resources, structural features and bioengineering strategies

β-mannanases are pivotal enzymes that cleave the mannan backbone to release short chain mannooligosaccharides, which have tremendous biotechnological applications including food/feed, prebiotics and biofuel production. Due to the high temperature conditions in many industrial applications, thermophilic mannanases seem to have great potential to overcome the thermal impediments. Thus, structural analysis of thermostable β-mannanases is extremely important, as it could open up new avenues for genetic engineering, and protein engineering of these enzymes with enhanced properties and catalytic efficiencies. Under this scope, the present review provides a state-of-the-art discussion on the thermophilic β-mannanases from bacterial origin, their production, engineering and structural characterization. It covers broad insights into various molecular biology techniques such as gene mutagenesis, heterologous gene expression, and protein engineering, that are employed to improve the catalytic efficiency and thermostability of bacterial mannanases for potential industrial applications. Further, the bottlenecks associated with mannanase production and process optimization are also discussed. Finally, future research related to bioengineering of mannanases with novel protein expression systems for commercial applications are also elaborated.

Quinoa protein/polysaccharide electrostatic complex stabilized vegan high internal phase emulsions for 3D printing: Role of complex state and gelling-type polysaccharides

Rational selection of the complex state and polysaccharide type may enhance the performance of electrostatic complex stabilized high internal phase emulsions (HIPEs). Herein, quinoa proteins were extracted to form electrostatic complexes separately with three gelling-type polysaccharides to fabricate HIPEs. Results showed that the complexes in soluble state (pH 8.4-5.6) exhibited moderate size, high negative potential and enhanced protein hydrophobicity, and could achieve HIPEs with 84% oil phase upon acidification to pH 6 at low concentrations. Its excellent interfacial structure enhanced stability during heating, freeze-thawing and long-term storage, and exhibited promising 3D printing potential. Furthermore, the complexes formed by sulfated polysaccharide carrageenan had higher amphiphilicity than those formed by carboxylated polysaccharide pectin or sodium alginate, and their stabilized HIPE had preferable droplet size, stability and 3D printing resolution than its counterparts. This study may provide new insights into the performance enhancement of protein/polysaccharide electrostatic complex stabilized HIPEs.

The effect of apple pomace powder and calcium ions on selected physicochemical properties of freeze-dried carrot-orange-ginger snacks

BACKGROUND

This study aimed to determine the effect of various amounts of dried apple pomace (AP) powder and calcium ions on selected physicochemical properties of restructured freeze-dried snacks in comparison with products obtained with low-methoxyl pectin (LMP). The material was prepared using frozen carrot, orange concentrate, ginger, water, and various concentrations of AP (1, 3, 5%) and calcium lactate (0, 0.01, 0.05%). The reference samples were without additives, and with 0.5 or 1.5% of LMP combined with 0.01% of calcium lactate.

RESULTS

The material was studied in terms of water content and activity, hygroscopic properties, structure, texture, color, and polyphenol content (TPC), and antioxidant activity. The addition of AP resulted in reducing water activity and porosity. As a consequence of the increasing density of the structure, the reduction of hygroscopic properties by up to 16% followed the increasing amount of AP. Apple pomace and calcium ions strengthened the structure. The addition of 3% and 5% of AP gave a hardening effect close to or better than 0.5% LMP. Because of the pigment dilution, LMP caused significantly greater total color change than AP. The incorporation of AP also increased TPC and enhanced antioxidant activity in comparison with the reference materials by up to 18%.

CONCLUSION

The results showed that dried AP powder can be applied successfully as an additive enhancing stability, texture and bioactive compound content, thus fortifying the physicochemical properties of restructured freeze-dried fruit and vegetable snacks. © 2023 Society of Chemical Industry.

The Effects of Naematelia aurantialba on the Pasting and Rheological Properties of Starch and the Research and Development of Soft Candy

To study the effects of Naematelia aurantialba (NA) on the rheological and gelatinization properties of starch, the processing methods of NA were diversified. In this study, the gelatinization and rheological properties of corn starch (CS) and edible cassava starch (ECS) were investigated by adding NA with different mass fractions. Starch soft candy was prepared using NA, CS, and ECS as the main raw materials. Rheological studies showed that both CS-NA and ECS-NA exhibited elastic modulus (G') > viscosity modulus (G″), implying elastic behavior. G' was such that CS+1%NA > CS+5%NA > CS+3%NA > CS > CS+2%NA > CS+4%NA > ECS+4%NA > ECS+3%NA > ECS+5%NA > ECS+2%NA > ECS+1%NA > ECS. The gelatinization implied showed that after adding NA, the pasting temperature of CS-NA and ECS-NA increased by 1.33 °C and decreased by 2.46 °C, while their breakdown values decreased by 442.35 cP and 866.98 cP, respectively. Through a single-factor test and orthogonal test, the best formula of starch soft candy was as follows: 0.4 f of NA, 10 g of white granulated sugar, a mass ratio of ECS to CS of 20:1 (g:g), 0.12 g of citric acid, 1 g of red date power, and 16 mL of water. The soft candy was stable when stored for two days. This study offers a new direction for the research and development of NA starch foods.

Comparative studies on the rheological characteristics, functional attributes, and baking stability of xanthan and guar gum formulated honey gel matrix

The research aims to enhance the characteristics of honey by incorporating xanthan gum (XG) and guar gum (GG) at various concentrations (0.5-2.0% w/w) and preparing a honey gel matrix (HGM) through high-shear homogenization. This approach serves as a substitute for fat-based filling materials commonly used in bakery products. The study encompassed an investigation of the rheological characteristics (steady and dynamic), total phenolic content (TPC), antioxidant activity, and baking stability of the HGMs. The concentration of the gums used significantly influenced the transformation of honey into the HGM and its stability. Notably, the XG-HGM demonstrated greater shear thinning behavior and higher consistency compared to the GG-HGM. Herschel Bulkley and power law models were found to be the best-fitted models for XG-HGM and GG-HGM, respectively. Furthermore, both XG-HGM and GG-HGM exhibited a higher viscous component (G″) than an elastic component (G') at low concentrations, up to 1% (w/w) for XG-HGM and 1.5% (w/w) for GG-HGM; however, this behavior reversed beyond those concentrations (G' > G″). The XG-HGM exhibited lower temperature sensitivity compared to GG-HGM, indicating better stability under varying heat conditions. Moreover, both TPC and antioxidant activity decreased with increasing concentrations of both gums. The XG-HGM achieved the highest baking stability index, reaching 95.23% at a 2% concentration. This modified HGM formulated with XG demonstrated superior consistency, color retention, and exceptional baking stability, making it a promising candidate for application as a filling material in the bakery sector. Its improved stability and quality can facilitate the development of a wide range of baking products in the food industry.

Carrageenan impact on digestive proteolysis of meat proteins in meatballs or soluble hydrolyzed collagen

In a health-conscious age, vivid discussion has been made on the healthfulness of processed foods and food additives. This study focuses on carrageenan (CGN), an approved but debated family of sulphated galactans from algae used as gelling, thickening and stabilizing agents but with indications of possible adverse effects, including as an inhibitor of digestive proteolysis. To challenge this inhibitory hypothesis, food-grade kappa-, iota and lambda-CGN preparations were used to produce beef meatballs whose proteolysis was studied using an in vitro digestion model coupled to various proteomic analyses. Results show that CGN anti-nutritional effects are abolished in beef meatballs. Specifically, proteomic analysis of gastric digesta of myosin light chain 1 (MYL1), alpha skeletal muscle (ACTA1), glyceraldehyde-3-phosphate dehydrogenase (GAPDH) and fructose-bisphosphate aldolase (ALDOA) reveal no appreciable differences in the profiles of bioaccessible peptides. Separate digestions of a soluble collagen hydrolysate show CGN does inhibit proteolysis of soluble collagen, therefore supporting the notion that the meat matrix confers a shielding effect that eliminates CGN ability to interfere with digestive proteolysis. Thus, this work shows that CGN ability to hinder digestive proteolysis may not apply to all foods and contributes evidence important to the discussions on CGN uses, indications and regulatory status.

Origins of thirstiness sensation and current food solutions

The sensation of thirstiness is the desire to drink water. In certain situations, the ingestion of liquid water can be restricted. As a result, thirstiness is not relieved, resulting in an uncomfortable and distressing situation. The present review describes thirstiness and hydration, the food products and beverages that cause thirstiness, and the beverages and food products currently available to quench thirstiness in individuals with restricted access to liquid ingestion. It also discusses how to measure the effectiveness of calming thirstiness. To diminish thirstiness distress, different alternatives to liquids are proposed. Individuals with swallowing disorders are given thickened water, individuals with restricted water ingestion are given ice cubes or ice popsicles of different flavors, and sportspeople are given energy gels. However, current beverage solutions seem not to relieve thirst fully, although some stimuli like iced water, flavors (especially lemon and mint), or acids seem to work better than plain stimuli and could be added to existing products. Therefore, there is still a need to incorporate these strategies into beverage and food formulations and to test their effectiveness.

Investigation of rheological, physicochemical, and sensorial properties of traditional low-fat Doogh formulated

Doogh is a fermented beverage made from yoghurt with water and salt. Similarly, drinks based on yoghurt are available in different countries with varying degrees of dilution, fat content, rheological properties, and taste. In this project, the use of mathematical calculations in describing rheological parameters from traditional low-fat Doogh enriched with Caspian Sea (Huso huso) gelatin (0.4 w/v %), xanthan hydrocolloids (0.4 w/v %), and their mixture at a ratio of 0.2:0.2 w/v % studied. Also, serum isolation, pH, and sensory evaluation of samples were investigated. Also, the relationship between apparent viscosity and temperature of Doogh samples using the Arrhenius equation was studied. The sensory evaluation revealed that the overall acceptance scores of the samples containing gelatin, xanthan, mix, and control were 4.31, 4.33, 4.58, and 4.12, respectively. The study on serum separation value showed control sample (45.07) and mix sample (0.84) at the end of 30 days. On the first day, the pH of the Doogh samples decreased with the addition of hydrocolloids, and this trend was time dependent. pH reduction was higher in Doogh with gelatin than in other samples. Mathematical calculations showed that the low-fat Doogh is a non-Newtonian type and shear-thinning (Pseudoplastic) fluid. The activation energy was calculated between 11.65 and 19.15 kJ/mol. According to the obtained results, it concluded that the use of two hydrocolloid compounds improved the physicochemical and sensory characteristics of the low-fat Doogh samples. Also, the Ostwald-de Waele mathematical model had a high correlation with the rheological behavior of the samples.

Elevating meat products: Unleashing novel gel techniques for enhancing lipid profiles

Rising health concerns and the diet-health link drive demand for healthier foods, prompting meat manufacturers to reformulate traditional products. These manufacturers have reduced fat content to enhance nutritional quality, which is essential for maintaining desired product features. As a result, numerous strategies have emerged over recent decades to decrease fat and enhance the lipid profiles of meat products. Among these strategies, using hydrocolloids, emulsification, encapsulation, or gelation of oils to produce fat substitutes stands out. Using gels allows fat replacers with characteristics similar to animal fat (similar rheological, physical, or appearance properties) but with a much healthier lipid profile (by incorporating highly unsaturated oils). Therefore, this manuscript aims to comprehensively describe the main fat replacers used to prepare meat products. In addition, an in-depth review of the latest studies (2022-2023) that use novel gels to reform meat products has been made, indicating in each case the implications that the reformulation produces at a physicochemical, nutritional, and sensory level. Given the reported results, it seems clear that the strategy of using bigels or emulgels is very promising and allows obtaining nutritionally highly improved meat products without affecting their sensory or physicochemical properties. However, the best conditions to obtain a novel gel suitable for use as a fat substitute for each meat product still need to be studied and correctly defined. Moreover, these advancements can pave the way for more extensive studies on using novel gel techniques in other food industries, expanding their applicability and leading to healthier consumer options across various food categories.

Rehashing Our Insight of Seaweeds as a Potential Source of Foods, Nutraceuticals, and Pharmaceuticals

In a few Southeast Asian nations, seaweeds have been a staple of the cuisine since prehistoric times. Seaweeds are currently becoming more and more popular around the world due to their superior nutritional value and medicinal properties. This is because of rising seaweed production on a global scale and substantial research on their composition and bioactivities over the past 20 years. By reviewing several articles in the literature, this review aimed to provide comprehensive information about the primary and secondary metabolites and various classes of bioactive compounds, such as polysaccharides, polyphenols, proteins, and essential fatty acids, along with their bioactivities, in a single article. This review also highlights the potential of seaweeds in the development of nutraceuticals, with a particular focus on their ability to enhance human health and overall well-being. In addition, we discuss the challenges and potential opportunities associated with the advancement of pharmaceuticals and nutraceuticals derived from seaweeds, as well as their incorporation into different industrial sectors. Furthermore, we find that many bioactive constituents found in seaweeds have demonstrated potential in terms of different therapeutic attributes, including antioxidative, anti-inflammatory, anticancer, and other properties. In conclusion, seaweed-based bioactive compounds have a huge potential to play an important role in the food, nutraceutical, and pharmaceutical sectors. However, future research should pay more attention to developing efficient techniques for the extraction and purification of compounds as well as their toxicity analysis, clinical efficacy, mode of action, and interactions with regular diets.

Inhibitory Effects of Some Hydrocolloids on the Formation of Advanced Glycation End Products and Heterocyclic Amines in Chemical Models and Grilled Beef Patties

Effectively inhibiting the formation of heterocyclic amines (HAs) and advanced glycation end products (AGEs) is crucial to human health. In the present study, chemical model systems were used to evaluate the inhibitory effects of seven hydrocolloids on HA and AGE formation. The results showed that hydrocolloids effectively inhibited the formation of two major AGEs. However, their inhibitory action against HA formation showed unexpected results, wherein alginic acid, carrageenan and konjac glucomannan promoted the formation of 2-Amino-1-methyl-6-phenylimidazo [4,5-b]pyridine (PhIP), harmane, norharmane and 2-amino-3,8-dimethyl-imidazo [4,5-f]-quinoline (MeIQx). Only chitosan and pectin showed significant inhibitory effects on HAs, reducing HA levels by 34.5-56.3% and 30.1-56.6%, respectively. In grilled beef patties, the addition of 1.5% chitosan and pectin significantly decreased AGE and HA content by 53.8-67.0% and 46.9-68.1%, respectively. Moreover, it had a limited impact on quality and sensory properties. Further mechanism studies conducted in model systems revealed that chitosan and pectin decreased the formation of key intermediates of AGEs and HAs. These findings suggest that chitosan and pectin are powerful inhibitors against AGE and HA formation with minimal impact on food quality. Therefore, their application in meat preparation and processing could effectively decrease human dietary exposure to HAs and AGEs.

Classification, gelation mechanism and applications of polysaccharide-based hydrocolloids in pasta products: A review

Polysaccharide-based hydrocolloids (PBHs) are a group of water-soluble polysaccharides with high molecular weight hydrophilic long-chain molecules, which are widely employed in food industry as thickeners, emulsifiers, gelling agents, and stabilizers. Pasta products are considered to be an important source of nutrition for humans, and PBHs show great potential in improving their quality and nutritional value. The hydration of PBHs to form viscous solutions or sols under specific processing conditions is a prerequisite for improving the stability of food systems. In this review, PBHs are classified in a novel way according to food processing conditions, and their gelation mechanisms are summarized. The application of PBHs in pasta products prepared under different processing methods (baking, steaming/cooking, frying, freezing) are reviewed, and the potential mechanism of PBHs in regulating pasta products quality is revealed from the interaction between PBHs and the main components of pasta products (protein, starch, and water). Finally, the safety of PBHs is critically explored, along with future perspectives. This review provides a scientific foundation for the development and specific application of PBHs in pasta products, and provides theoretical support for improving pasta product quality.

Application of guar (Cyamopsis tetragonoloba L.) gum in food technologies: A review of properties and mechanisms of action

With the world continuing to push toward modernization and the consumption of processed foods growing at an exponential rate, the demand for texturizing agents and natural additives has also risen as a result. It has become increasingly common to use thickening agents in food products to modify their rheological and textural properties and enhance their quality characteristics. They can be divided into (1) animal derived (chitosan and isinglass), (2) fermentation produced (xanthan and curdlan), (3) plant fragments (pectin and cellulose), (4) seaweed extracts (agar and alginate), and (5) seed flours (guar gum and locust bean gum). The primary functions of these materials are to improve moisture binding capacity, modify structural properties, and alter flow behavior. In addition, some have another responsibility in the food sector, such as the main ingredient in the delivery systems (encapsulation) and nanocomposites. A galactomannan polysaccharide extracted from guar beans (Cyamopsis tetragonolobus), known as guar gum (GG), is one of them, which has a wide range of utilities and possesses popularity among scientists and consumers. In the world of modernization, GG has found its way into numerous industries for use in food, cosmetics, pharmaceuticals, textiles, and explosives. Due to its ability to form hydrogen bonds with water molecules, it imparts significant thickening, gelling, and binding properties to the solution as well as increases its viscosity. Therefore, this study is aimed to investigate the characteristics, mechanisms, and applications of GG in different food technologies.

Gelling and rheological properties of a polysaccharide extracted from Ocimum album L. seed

In this study, a new polysaccharide was isolated from Ocimum album L. seed (OA), and its physicochemical and rheological properties were investigated. Ocimum album polysaccharide (OAP) was an acidic heteropolysaccharide with a molecular weight of 1935 kDa, and it was composed of five types of sugars: mannose (32.95 %), glucose (27.57 %), galactose (19.29 %), rhamnose, (15.96 %) and galacturonic acid (4.23 %). According to the results obtained from Huggins and Kraemer equations, the intrinsic viscosity was 6.9 dL/g in distilled water. The OAP solutions at a concentration between 0.1 and 1.5 %, showed shear-thinning behavior, and the Herschel-Bulkley and Cross models exhibited a high ability to describe the flow behavior of OAP solutions. The apparent viscosity of 1 % OAP solution was decreased in the presence of different concentrations of NaCl (0.1, 0.3, and 0.5 M), at different pHs (3-11), and in temperatures between 5 and 100 °C. Also, the pseudoplastic behavior was observed in all samples. In OAP solutions (0.1-1.5 %), the up and down curves in the shear stress-shear rate diagram did not coincide, which indicated time-dependent (thixotropic) behavior. Although, the thixotropic properties of 1 % OAP solution were weakened with adding NaCl (0.1-0.5 M) and at different pH (3-11). The results obtained from the dynamic oscillatory test showed that the OAP solutions at concentrations higher than 0.1 % had a gel-like behavior, and the viscoelastic moduli (G' and G″) were weakened in the presence of salt and with a change in pH. Also, in the temperature sweep test, the 1 % solution showed the behavior of thermally irreversible gels.

The structural and functional properties of soybean protein-polyglutamic acid complex effected the stability of W/O/W emulsion encapsulated Nattokinase

Nattokinase (NK) derived from food is a sustainable thrombolytic agent. In this study, to protect vulnerable biological activity of NK, the targeted modified W/O/W emulsions were fabricated from complexes of soybean isolate protein (SPI) and polyglutamic acid (PGA). The results showed that the SPI-PGA complex formed a tighter internal structure through non-covalent bonds. The secondary structure, α-helix and β-sheet content of the 1:3 (v/v) ratio complex of SPI to PGA increased by 6.14% and 8.62%, respectively. The emulsification and stability of the complexes were improved by refining structural properties as against SPI. The W/O/W emulsions coated by complexes formed the stronger network structure with higher encapsulation efficiency, better interfacial features, and better storage stability. Moreover, the highest bioavailability was achieved by W/O/W emulsions coated with 1:3 ratio complex at 80.69%. This study provided a new strategy towards tailoring ideal emulsion vehicles and expanded the NK application in food formulations.

A global perspective on a new paradigm shift in bio-based meat alternatives for healthy diet

A meat analogue is a casserole in which the primary ingredient is something other than meat. It goes by various other names, such as meat substitute, fake meat, alternative meat, and imitation meat. Consumers growing interest in improving their diets and the future of the planet have contributed to the move towards meat substitutes. This change is due to the growing popularity of low-fat and low-calorie diets, the rise of flexitarians, the spread of animal diseases, the loss of natural resources, and the need to cut down on carbon emissions, which lead to greenhouse effects. Plant-based meat, cultured meat, algal protein-based meat, and insect-based meat substitutes are available on the market with qualities like appearance and flavor similar to those of traditional meat. Novel ingredients like mycoprotein and soybean leg haemoglobin are mixed in with the more traditional soy proteins, cereals, green peas, etc. Plant-based meat is currently more popular in the West, but the growing interest in this product in Asian markets indicates the industry in this region will expand rapidly in the near future. Future growth in the food sector can be anticipated from technologies like lab-grown meat and its equivalents that do not require livestock breeding. Insect-based products also hold great potential as a new source of protein for human consumption. However, product safety and quality should be considered along with other factors such as marketability and affordability.

Edible gum addition improves the quality of freeze-dried restructured strawberry blocks

Freeze-dried restructured strawberry blocks (FRSB) have become an increasingly popular product. In this study, the effects of six edible gums (guar gum, gelatin, xanthan gum, pectin, konjac gum, and carrageenan) on the FRSB quality were investigated. For FRSBs, compared with those in untreated samples, the 0.6 % guar gum addition increased texture profile analysis (TPA) hardness, chewiness, and puncture hardness by 29.59%, 174.86%, and 25.34%, respectively; after the 0.6% gelatin addition, the sensory evaluation sourness was reduced by 8.58%, whereas yield, TPA chewiness, and puncture hardness were increased by 3.40%, 28.62%, and 92.12%, respectively; with the 0.9% gelatin addition, the sensory evaluation sourness was reduced by 8.58%; with the 0.9% pectin addition, the yield, TPA hardness, chewiness, and puncture hardness were increased by 4.55%, 5.94%, 77.49%, and 103.62%, respectively. In summary, 0.6-0.9% pectin, gelatin, and guar gum addition are recommended to improve the main qualities of FRSBs.

Algal Phycocolloids: Bioactivities and Pharmaceutical Applications

Seaweeds are abundant sources of diverse bioactive compounds with various properties and mechanisms of action. These compounds offer protective effects, high nutritional value, and numerous health benefits. Seaweeds are versatile natural sources of metabolites applicable in the production of healthy food, pharmaceuticals, cosmetics, and fertilizers. Their biological compounds make them promising sources for biotechnological applications. In nature, hydrocolloids are substances which form a gel in the presence of water. They are employed as gelling agents in food, coatings and dressings in pharmaceuticals, stabilizers in biotechnology, and ingredients in cosmetics. Seaweed hydrocolloids are identified in carrageenan, alginate, and agar. Carrageenan has gained significant attention in pharmaceutical formulations and exhibits diverse pharmaceutical properties. Incorporating carrageenan and natural polymers such as chitosan, starch, cellulose, chitin, and alginate. It holds promise for creating biodegradable materials with biomedical applications. Alginate, a natural polysaccharide, is highly valued for wound dressings due to its unique characteristics, including low toxicity, biodegradability, hydrogel formation, prevention of bacterial infections, and maintenance of a moist environment. Agar is widely used in the biomedical field. This review focuses on analysing the therapeutic applications of carrageenan, alginate, and agar based on research highlighting their potential in developing innovative drug delivery systems using seaweed phycocolloids.

Effects of Porphyra haitanensis polysaccharides on gelatinization and gelatinization kinetics of starches with different crystal types

The effects of Porphyra haitanensis polysaccharide (PHP) on the gelatinization and gelatinization kinetics of corn starch (CS), potato starch (PS) and lotus seed starch (LS) were studied. The gelatinization, rheological and thermal enthalpy properties of the samples were measured by a rapid viscosity analyzer (RVA), a rheometer, and a differential scanning calorimeter (DSC), respectively. And the kinetic equations were further established. RVA confirmed that the addition of 0.4 %, 0.8 % and 1.2 % PHP elevated the gelatinization viscosity of CS and LS but decreased that of the PS, and also elevated the thermal balance of CS, PS, and LS, especially PS (The breakdown viscosity was decreased to 363.00 ± 6.08, 370.00 ± 1.15, and 362.00 ± 0.58, respectively). And the rheometer indicated that the addition of 0.4 %, 0.8 % and 1.2 % PHP improved the apparent viscosity of CS, PS and LS, especially PS (The consistency coefficient was increased to 18.26 ± 0.02, 21.71 ± 0.04, and 23.26 ± 0.01, respectively). Eventually, DSC displayed that the addition of 0.4 %, 0.8 % and 1.2 % PHP extended the gelatinization temperature and enthalpy of CS, PS, and LS, especially PS. Among them, the gelatinization temperature (63.40 ± 0.03, 70.26 ± 0.02 and 74.61 ± 0.01, respectively) and the gelatinization enthalpy (1.55 ± 0.01) of PS increased the most with 1.2 % PHP. Moreover, gelatinization kinetics displayed that the addition of 0.4 %, 0.8 % and 1.2 % PHP decreased the rate constants of CS, PS, and LS and accelerated the activation energies of CS (666.37 ± 4.23, 623.89 ± 4.21 and 558.39 ± 2.35, respectively) and PS (752.53 ± 4.13, 699.61 ± 3.78 and 662.15 ± 4.52, respectively) while reducing that of the LS (938.87 ± 3.38, 669.98 ± 4.61 and 491.48 ± 4.29, respectively). Therefore, the addition of PHP at all concentrations inhibited the gelatinization procedure of CS and PS but promoted that of the LS. This study provided a theoretical basis for the creation of new products based on PHP and starch.

Spray-Dried Animal Plasma as a Multifaceted Ingredient in Pet Food

Plasma is a co-product from pork and beef obtained during the processing of animals for human consumption. The spray-drying process maintains the solubility of spray-dried animal plasma (SDAP) and its nutritional and functional properties, making this ingredient multifunctional in human and animal nutrition. In pet food, SDAP has been used in the production of wet foods (pates and chunks in gravy) as an emulsifying and binding agent, with the potential to replace hydrocolloids partially or totally, which have some negative implications for digestibility, fecal quality, and intestinal inflammation. From a nutritional point of view, SDAP has high digestibility and an amino acid profile compatible with high-quality ingredients, such as powdered eggs. Studies in companion animals, especially in cats, have shown that SDAP is an ingredient with high palatability. Despite the immunomodulatory, anti-inflammatory, prebiotic, and neuroprotective properties demonstrated in some animal models, there are still few publications demonstrating these effects in dogs and cats, which limits its use as a functional ingredient for these species. In this review, the potential use of SDAP in pet food, aspects related to the sustainability of this ingredient, and opportunities for studies in companion animals are discussed.

Multifaceted applications of ulvan polysaccharides: Insights on biopharmaceutical avenues

Ulvans are water-soluble sulfated polysaccharides predominantly found in the cell wall of green algae. They hold unique characteristics that are attributed to their 3D conformation, functional groups along with the presence of saccharides and sulfate ions. Traditionally, ulvans are widely used as food supplements and probiotics owing to the high content of carbohydrates. Despite their widespread usage in food industry, an in-depth understanding is required for extrapolating their potential application as a nutraceutical and medicinal agent which could be beneficial in promoting human health and well-being. This review emphasizes novel therapeutic avenues where ulvan polysaccharides can be used beyond their nutritional applications. A collection of literature points towards multifarious applications of ulvan in various biomedical fields. Structural aspects along with extraction and purification methods have been discussed. The underlying molecular mechanisms associated with its biomedical potential in different therapeutic fields like oncology, infectious diseases, inflammation, neuroprotection and tissue engineering, etc. have been unravelled. Challenges associated with clinical translation and future perspectives have been deliberated.

Lemon gum: Non-toxic arabinogalactan isolated from Citrus × latifolia with antiproliferative property against human prostate adenocarcinoma cells

Lemon gum (LG) obtained from Citrus × latifolia in Brazil was isolated and characterized. In addition, gum biocompatibility was evaluated in vitro and in vivo by Galleria mellonella and mice model. The cytotoxicity against tumor cells was also evaluated. The ratio of arabinose:galactose: rhamnose:4-OMe-glucuronic acid was 1:0.65:0.06:0.15. Small traces of protein were detected, emphasizing the isolate purity. Molar mass was 8.08 × 10⁵ g/mol, with three different degradation events. LG showed antiproliferative activity against human prostate adenocarcinoma cancer cells, with percentage superior to 50 %. In vivo toxicity models demonstrated that LG is biocompatible polymer, with little difference in the parameters compared to control group. These results demonstrate advance in the study of LG composition and toxicity, indicating a potential for several biomedical and biotechnological future applications.

Physicochemical, Rheological, and Microstructural Properties of Low-Fat Mayonnaise Manufactured with Hydrocolloids from Dioscorea rotundata as a Fat Substitute

(1) Background: In this study, the potential use of Dioscorea rotundata hydrocolloids was evaluated to develop low-fat mayonnaise. (2) Methods: The effect of different concentrations of hydrocolloids on the physicochemical, microstructural, and rheological properties of mayonnaise was evaluated. (3) Results: Physicochemical analyses showed pH values that were stable over time but decreased with increasing hydrocolloid concentration. The color parameters showed a decrease in luminosity and an increase in the values of a* and b* over time, which can be translated into an increase in yellow and a decrease in white, with a greater accentuation in the control sample. The rheological study allowed us to obtain a non-Newtonian flow behavior of the shear-thinning type for all samples, and the flow curves were well-fitted by the Sisko model (R2 ≥ 0.99). The samples had an elastic rather than viscous behavior, typical of dressings and emulsions. This indicates that the storage modulus was greater than the loss modulus (G′ > G″) in the evaluated frequency range. (4) Conclusions: hydrocolloids from Dioscorea rotundata have potential as a fat substitute in emulsion-type products.

Rheo-Fermentation Dough Properties, Bread-Making Quality and Aroma Characteristics of Red Bean (Vigna angularis) Sourdough Induced by LAB Weissella confusa QS813 Strain Fermentation

This study investigated the impact of in situ-formed exopolysaccharides (EPS) in red bean (Vigna angularis) sourdough fermented by Weissella confusa QS813 on dough rheo-fermentation properties, bread-making quality and aroma characteristics of red bean sourdough bread. The EPS formed in red bean sourdough and sourdough-induced acidification improved the maximum dough fermentation height, gas retention coefficient and viscoelastic properties of dough. Doughs had a lower increase rate of total SDS-soluble gluten proteins, a low decline in GMP content and similar free sulfhydryl content to wheat dough. Resultantly, breads showed declines in baking loss and hardness, increase in specific volume and lower moisture loss and staling rate after 7 days of storage. Finally, despite a reduction in the total content of aroma compounds, new aroma compounds such as acetic acid and higher contents of 3-methyl-1-butanol and 2,3-butanediol were enriched in red bean sourdough bread. Sourdough acidification probably promoted interaction of EPS with gluten or red bean proteins through bond interactions to form structures which stabilized gluten in dough and increased water-binding ability in red bean sourdough bread. This study provided a better understanding of the role of EPS in sourdough in improving bread quality and of promising strategies to address consumer demand for nutritious and clean-label products.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

Marine macroalgae polysaccharides-based nanomaterials: an overview with respect to nanoscience applications

Background

Exploration of marine macroalgae poly-saccharide-based nanomaterials is emerging in the nanotechnology field, such as wound dressing, water treatment, environmental engineering, biosensor, and food technology.

Main body

In this article, the current innovation and encroachments of marine macroalgae polysaccharide-based nanoparticles (NPs), and their promising opportunities, for future prospect in different industries are briefly reviewed. The extraction and advancement of various natural sources from marine polysaccharides, including carrageenan, agarose, fucoidan, and ulvan, are highlighted in order to provide a wide range of impacts on the nanofood technology. Further, seaweed or marine macroalgae is an unexploited natural source of polysaccharides, which involves numerous different phytonutrients in the outermost layer of the cell and is rich in sulphated polysaccharides (SP), SP-based nanomaterial which has an enhanced potential value in the nanotechnology field.

Conclusion

At the end of this article, the promising prospect of SP-based NPs and their applications in the food sector is briefly addressed.

Meat texture modification for dysphagia management and application of hydrocolloids: A review

Dysphagia is a medical condition that describes the difficulty of swallowing food, and texture modified food (TMF) is the best intervention for dysphagia. The relevant guidelines to identify dysphagia food are provided by the International Dysphagia Diet Standardization Initiative (IDDSI). Developing texture modified meat is a challenging task due to its fibrous microstructure and harder texture. Various meat tenderization attempts are therefore evaluated in the literature. Meat texture modification for dysphagia is not just limited to tenderization but should be focused on safe swallowing attributes as well. The application of hydrocolloids for designing TMF has a major research focus as it is a cost-effective method and offers an opportunity for careful control. The present review focuses on the meat texture modification attempts that have been used in the past and present, with special attention to the use of hydrocolloids. Several studies have shown improvements in texture upon the addition of various hydrocolloids; however, few studies have attempted to develop texture modified meat for people with dysphagia. This area has to be further developed along with the sensory evaluations conducted with the dysphagia population, to validate the industrial application of hydrocolloids to TMF.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.

Gluten-free bakery products: Ingredients and processes

There is an increasing demand for gluten-free products around the world because certain groups of people, which have increased in the last decades, need to eliminate gluten from their diet. A growing number of people consider gluten-free products to be healthier. However, making gluten-free products such as bread is a technological challenge due to the important role of the gluten network in their development. However, other products, such as cakes and cookies usually made with wheat flour, can easily be made with gluten-free starches or flours since gluten does not play an essential role in their production. To replace wheat flour in these elaborations it is necessary to resort to gluten-free starches and/or flours and to gluten substitutes. Additionally, it can be convenient to incorporate other ingredients such as proteins, fibers, sugars or oils, as well as to modify their quantities in wheat flour formulations. Regarding gluten-free flours, it will also be necessary to know the parameters that influence their functionality in order to obtain regular products. These problems have originated a lower availability of gluten-free products which have a worse texture and are less tasty and more expensive than their homologues with gluten. These problems have been partially solved thanks to research on these types of products, their ingredients and their production methods. In recent years, studies about the nutritional improvement of these products have increased. This chapter delves into the main ingredients used in the production of gluten-free products, the processes for making gluten-free breads, cakes and cookies, and the nutritional quality of these products.

Conventional vs. Innovative Protocols for the Extraction of Polysaccharides from Macroalgae

Macroalgae are one of the most environmentally friendly resources, and their industrial by-products should also be sustainable. Algal polysaccharides represent valuable products, and the definition of new eco-sustainable extraction processes, ensuring a safe and high-quality product, is a new goal in the context of reducing the carbon footprint. The aim of the present work was to determine the influence of the extraction methodology on the properties and structure of the polysaccharides, comparing conventional and innovative microwave-assisted methods. We focused on extraction times, yield, chemical composition and, finally, biological activities of raw polymers from three macroalgal species of Chlorophyta, Rhodophyta and Phaeophyceae. The main objective was to design a sustainable process in terms of energy and time savings, with the aim of developing subsequent application at the industrial level. Extraction efficacy was likely dependent on the physico-chemical polysaccharide properties, while the use of the microwave did not affect their chemical structure. Obtained results indicate that the innovative method could be used as an alternative to the conventional one to achieve emulsifiers and bacterial antiadhesives for several applications. Natural populations of invasive algae were used rather than cultivated species in order to propose the valorization of unwanted biomasses, which are commonly treated as waste, converting them into a prized resource.

Effect of Hydrothermal Cooking Combined with High-Pressure Homogenization and Enzymatic Hydrolysis on the Solubility and Stability of Peanut Protein at Low pH

A novel method combining high-pressure homogenization with enzymatic hydrolysis and hydrothermal cooking (HTC) was applied in this study to modify the structure of peanut protein, thus improving its physicochemical properties. Results showed that after combined modification, the solubility of peanut protein at a pH range of 2–10 was significantly improved. Moreover, the Turbiscan stability index of modified protein in the acidic solution was significantly decreased, indicating its excellent stability in low pH. From SDS-PAGE (Sodium Dodecyl Sulfate PolyAcrylamide Gel Electrophoresis), the high molecular weight fractions in modified protein were dissociated and the low molecular weight fractions increased. The combined modification decreased the particle size of peanut protein from 74.82 to 21.74 μm and shifted the isoelectric point to a lower pH. The improvement of solubility was also confirmed from the decrease in surface hydrophobicity and changes in secondary structure. This study provides some references on the modification of plant protein as well as addresses the possibility of applying peanut protein to acidic beverages.