Influence of flaxseed gum and NaCl concentrations on the stability of oil-in-water emulsions

Plant gums in Pickering emulsions: A review of sources, properties, applications, and future perspectives

Recently, there has been an increasing research interest in the development of Pickering emulsions stabilized with naturally derived biopolymeric particles. In this regard, plant gums, obtained as plant exudates or from plant seeds, are considered promising candidates for the development of non-toxic, biocompatible, biodegradable and eco-friendly Pickering stabilizers. The main objective of this review article is to provide a detailed overview and assess the latest advances in the formulation of Pickering emulsions stabilized with plant gum-based particles. The plant gum sources, types and properties are outlined. Besides, the current methodologies used in the production of plant gum particles formed solely of plant gums, or through interactions of plant gums with proteins or other polysaccharides are highlighted and discussed. Furthermore, the work compiles and assesses the innovative applications of plant gum-based Pickering emulsions in areas such as encapsulation and delivery of drugs and active agents, along with the utilization of these Pickering emulsions in the development of active packaging films, plant-based products and low-fat food formulations. The last part of the review presents potential future research trends that are expected to motivate and direct research to areas related to other novel food applications, as well as tissue engineering and environmental applications.

The role of alginate in starch nanocrystals-stabilized Pickering emulsions: From physical stability and microstructure to rheology behavior

Sodium alginate (SA) was used as a co-stabilizer to improve the Pickering emulsions stabilized by starch nanocrystals (SNC). Compared with pure SNC, SNC/SA complexes possess better neutral wettability with the contact angle approaching to 90°, more surface negative charges, and lower oil-water interfacial tension. These properties of particles make as-prepared emulsion higher stability with the lower creaming index and average droplet size. Furthermore, the emulsion exhibited good stability against salt (0-600 mM) and pH (2.0-6.0) at higher SA concentration (1.0 wt%). Confocal laser scanning microscopy (CLSM) images proved that SNC could be effectively adsorbed at the oil-water interface with the aid of SA. Rheological analysis showed that higher content of SA resulted in improved strength and higher viscosity of emulsion system. Results from this work indicating that SA could be a useful co-stabilizer to fulfill the demands of Pickering emulsions stabilized by SNC with stable characteristics.

Pickering emulsions stabilized by chitosan-flaxseed gum-hyaluronic acid nanoparticles for controlled topical release of ferulic acid

Chitosan (CS) based nanoparticles (NPs) were fabricated via an ionic gelation reaction modified by flaxseed gum (FG) or sodium tripolyphosphate (STPP). The average particle size, morphology, interfacial tension, and wettability of NPs were characterized. The particle size of CS-STPP-HA (hyaluronic acid)-FA (ferulic acid) NPs and CS-FG-HA-FA NPs was 400.8 nm and 262.4 nm, respectively under the optimized conditions of CS/STPP = 5:1 (w/w) or CS/FG = 1:1 (v/v) with HA concentration of 0.25 mg/mL and FA dosage of 25 μM. FG acted as a good alternative for STPP to form particles with CS in stabilizing Pickering emulsion with an internal diacylglycerol (DAG) phase of 50-80 % (v/v). The complex nanoparticles had high surface activity and contact angle close to 90 °C, being able to tightly packed at the droplet surface. The emulsions had high thermal, ionic and oxidative stability. With the aid of moisturizing polysaccharides and DAG oil, the emulsions had a good sustained-release ability for FA with deeper penetration and retention into the dermis of the skin. Thus, FG and HA-based NPs serve as green vehicles for the fabrication of novel Pickering emulsions and possess great potential to be applied as a delivery system for lipophilic active agents in functional food and cosmetic products.

Characteristics of insoluble soybean fiber (ISF) concentrated emulsions: Effects of pretreatment on ISF and freeze-thaw stability of emulsions

The properties of emulsions could be affected by the interactions between the components and network stabilization effect, which are commonly adjusted by changes in pH, ionic strength and temperature. In this work, insoluble soybean fiber (ISF) obtained via homogenization after alkaline treatment was pretreated firstly and then resultant emulsions were freeze-thawed. Heating pretreatment reduced droplet size, enhanced viscosity and viscoelasticity as well as subsequent stability of ISF concentrated emulsions, while both acidic pretreatment and salinized pretreatment decreased the viscosity and weakened the stability. Furthermore, ISF emulsions exhibited a good freeze-thaw performance which was further improved by secondary emulsification. Heating promoted the swelling of ISF and strengthened the gel-like structure of emulsions while salinization and acidization weakened the electrostatic interactions and caused the destabilization. These results indicated that pretreatment of ISF significantly influenced the concentrated emulsion properties, providing guidance for the fabrication of concentrated emulsions and related food with designed characteristics.

Flaxseed Gum/Arabic Gum/Tween 80-Based Oleogel as a Fat Substitute Applied in Emulsified Sausage: Physicochemical Properties, Sensory Attributes and Nutritional Quality

In the present study, flaxseed gum (FG), Arabic gum (GA) and Tween 80 were used to prepare oleogels through an emulsion-templated method, and the obtained oleogels were designed for the partial substitution of pork fat in emulsified sausage. An increment in FG concentrations enhanced the viscoelasticity of emulsions, which resulted in the improved stability of emulsion systems, with smaller droplet sizes. In addition, increased FG concentrations contributed to higher mechanical strength, denser network structure and lower oil loss of oleogels. As a fat substitute, the prepared oleogels improved the textural properties and nutritional quality of emulsified sausages. With the increase in the substitution level of oleogels, the hardness and chewiness of the emulsified sausage increased, and the cooking loss decreased. Meanwhile, the reformulation with oleogels decreased the saturated fat from 57.04 g/100 g lipid to 12.05 g/100 g lipid, while increasing the ratio of omega-6 to omega-3 essential fatty acids from 0.10 to 0.39. The obtained results demonstrated that the flaxseed gum/Arabic gum/Tween 80-based oleogels had huge potential to successfully replace pork fat in emulsified sausage products.

Fabrication of carboxymethyl starch/xanthan gum combinations Pickering emulsion for protection and sustained release of pterostilbene

Carboxymethyl starch (CMS)/xanthan gum (XG) combinations with different ratios (CMS/XG: 1/1, 3/1, 5/1, 7/1, 9/1, w/w) were used as Pickering emulsion delivery systems to encapsulate pterostilbene (PTS) to improve its stability. The results showed that the Pickering emulsion prepared using CMS/XG combinations could effectively encapsulate PTS. When the mass ratio of CMS to XG was 1:1, the encapsulation efficiency reached 91.20 %. The spherical particles in the PTS emulsion were dissociated and homogenous. The results of backscattered light experiments and storage stability studies showed that the PTS emulsion system prepared using CMS/XG was uniform and stable, with no obvious phase separation or emulsion droplet coalescence. With an increase in the mass ratio of XG, the water distribution in the emulsion became more evenly distributed, and the aggregation of droplets was reduced. The PTS emulsion prepared using CMS/XG improved the storage retention percentage of PTS. The cumulative release of PTS in the simulated gastric fluid was significantly lower than that in simulated intestinal fluid. The Pickering emulsion prepared using CMS/XG combinations can be used as a delivery system for functional foods and help to develop an efficient and reliable release system for hydrophobic bioactive substances.

Low oil Pickering emulsion gels stabilized by bacterial cellulose nanofiber/soybean protein isolate: An excellent fat replacer for ice cream

Food-grade Pickering emulsion gels with different oil phase fractions stabilized by Bacterial cellulose nanofibers/Soy protein isolate complex colloidal particles were prepared by one-step method. The properties of Pickering emulsion gels with different oil phase fractions (5 %, 10 %, 20 %, 40 %, 60 %, 75 %, v/v) and their applications in ice cream were investigated in the present study. The microstructural results showed that Pickering emulsion gels with the low oil phase fractions (5 %-20 %) were an emulsion droplet-filled gel, where the oil droplets were embedded in the network structure of cross-linked polymer, while Pickering emulsion gels with higher oil phase fractions (40 %-75 %) were an emulsion droplet-aggregated gel, which formed a network structure by flocculated oil droplets. The rheology result showed that the low oil Pickering emulsion gels had the same excellent performance as the high oil Pickering emulsion gels. Furthermore, the low oil Pickering emulsion gels showed good environmental stability under harsh conditions. Consequently, Pickering emulsion gels with 5 % oil phase fraction were used as fat replacers in ice cream and ice cream with different fat replacement rates (30 %, 60 % and 90 %, w/w) was prepared in this work. The results showed the appearance and texture of the ice cream with low oil Pickering emulsion gels as fat replacers was similar to that of the ice cream with no fat replacers, and the melting rate of the ice cream with low oil Pickering emulsion gels as fat replacers showed the lowest value of 21.08 % during the 45 min of melting experiment, as the fat replacer rate in the ice cream reached to 90 %. Therefore, this study demonstrated that low oil Pickering emulsion gels were excellent fat replacers and had great potential application in low calorie food production.

Effects of high acyl gellan gum on the rheological properties, stability, and salt ion stress of sodium caseinate emulsion

Sodium caseinate (SC) is widely used as a biological macromolecular emulsifier in oil-in-water (O/W) emulsions. However, the SC-stabilized emulsions were unstable. High-acyl gellan gum (HA) is an anionic macromolecular polysaccharide that improves emulsion stability. This study aimed to investigate the effects of HA addition on the stability and rheological properties of SC-stabilized emulsions. Study results revealed that HA concentrations >0.1 % could increase Turbiscan stability, reduce the volume average particle size, and increase the zeta-potential absolute value of the SC-stabilized emulsions. In addition, HA increased the triple-phase contact angle of SC, transformed SC-stabilized emulsions into non-Newtonian fluids, and effectively inhibited the movement of emulsion droplets. The effect of 0.125 % HA concentration was the most effective, allowing SC-stabilized emulsions to maintain good kinetic stability over a 30-d period. NaCl destabilized SC-stabilized emulsions but had no significant effect on HA-SC emulsions. In summary, HA concentration had a significant effect on the stability of SC-stabilized emulsions. HA altered the rheological properties and reduced creaming and coalescence by forming a three-dimensional network structure, increasing the electrostatic repulsion of the emulsion and the adsorption capacity of SC at the oil-water interface, and thereby improving the stability of SC-stabilized emulsions during storage and in the presence of NaCl.

An "intelligent -responsive" bactericidal system based on OSA-starch Pickering emulsion

Pickering emulsion based on OSA-starch was developed in this study as an intelligent delivery system for the application of thymol against foodborne pathogens. Morphology and microstructure characterization showed that the Pickering emulsion was an O/W type emulsion and stayed stable at starch concentration of 200 mg/mL and oil fraction at 30 % with particle size of 10 μm and absolute Zeta potential of -12.5 mV. Low field nuclear magnetic resonance and rheology experiments indicated that a denser network structure was formed in this stable Pickering emulsion. Besides, the Pickering emulsion could endure long-time storage, low pH (3,5) and additional NaCl (50, 100, 200, 400 mM) and it showed enhanced bactericidal effects against Escherichia coli, Staphylococcus aureus (thymol =1.48 μmol/L) and Aspergillus flavus (thymol = 0.624 μmol/L) by inducing ROS eruption, membrane lipid peroxidation and cell shrink. Moreover, the bactericidal assay demonstrated that thymol could be intelligently released and a considerable 75 % timely bactericidal effect was detected after 9 days' intermittently exposing to E. coli, S. aureus and A. flavus in vitro, by comparison thymol alone showed only 20 % bactericidal effect due to its volatility. The results are of great importance to offer an intelligent delivery system of bio-actives defending foodborne pathogens.

Fabrication and Characterization of Botanical-Based Double-Layered Emulsion: Protection of DHA and Astaxanthin Based on Interface Remodeling

Both DHA and astaxanthin, with multiple conjugated double bonds, are considered as health-promoting molecules. However, their utilizations into food systems are restricted due to their poor water solubility and high oxidizability, plus their certain off-smell. In this study, the interactions between perilla protein isolate (PPI) and flaxseed gum (FG) were firstly investigated using multiple spectroscopies, suggesting that hydrophobic, electrostatic force and hydrogen bonds played important roles. Additionally, double-layer emulsion was constructed by layer-by-layer deposition technology and exhibited preferable effects on masking the fishy smell of algae oil. Calcium ions also showed an improving effect on the elasticity modulus of O/W emulsions and was managed to significantly protect the stability of co-delivered astaxanthin and DHA, without additional antioxidants during storage for 21 days. The vegan system produced in this study may, therefore, be suitable for effective delivery of both ω-3 fatty acid and carotenoids for their further incorporation into food systems, such as plant-based yoghourt, etc.

Rheology and stability of concentrated emulsions fabricated by insoluble soybean fiber with few combined-proteins: Influences of homogenization intensity

Insoluble soybean fiber with few proteins, which is extracted from defatted okara by homogeneous combined with alkali treatment, was used to prepare concentrated emulsions. Firstly, insoluble soybean fiber extracted under pH12 was used to fabricate concentrated emulsions containing various particle concentrations and oil volume fractions and the optimized condition was obtained. Subsequently, insoluble soybean fiber extracted under pH12 followed by different homogeneous strengths were utilized. Concentrated emulsions stabilized by insoluble soybean fiber that was subjected to stronger homogenization presented lower absolute values of the ζ-potential about -47.7 mV and average droplet sizes of 37.0 μm approximately. Moreover, these emulsions exhibited a higher viscosity and elastic modulus, thereby providing better stability and less pronounced environmental sensitivities towards either pH 5 or 100 mM NaCl. Overall, results revealed that insoluble soybean fiber with few protein, especially subjected to homogenization during fiber extraction, was well suited to fabricate concentrated emulsions.

Recent progress in oil-in-water-in-oil (O/W/O) double emulsions

Oil-in-water-in-oil (O/W/O) double emulsions are recognized as an advanced design route for oil structuring that shows promising applications in the pharmaceutical, cosmetic, and food fields. This review summarizes the main research advances of O/W/O double emulsions over the past two decades. It mainly focuses on understanding the preparation strategies, stabilization mechanism, and potential applications of O/W/O double emulsions. Several emulsification strategies are discussed, including traditional two-step emulsification method, phase-inversion approach, membrane emulsification, and microfluidic emulsification. Further, the role of interfacial stabilizers and viscosity in the stability of O/W/O double emulsions will be discussed with a focus on synthetic emulsifiers, natural biopolymer sand solid particles for achieving this purpose. Additionally, analytical methods for evaluating the stability of O/W/O double emulsions, such as advanced microscopy, rheology, and labeling assay are reviewed taking into account potential limitations of these characterization techniques. Moreover, possible innovative food applications are highlighted, such as simulating fat substitutes to decrease the trans- or saturated fatty acid content and developing novel delivery and encapsulation systems. This review paves a solid way for the exploration of O/W/O double emulsions toward large-scale implementation within the food industry.

Preparation and stability mechanisms of double emulsions stabilized by gelatinized native starch

Double emulsions are promising carrier systems for foods, pharmaceuticals, and cosmetics. However, their limited stability hinders their practical applications. We used gelatinized starch to develop stable double emulsions as carrier materials. The oil/water/water (O/W/W) double emulsions were formed by 5 wt% native corn starch, while oil/water/oil (O/W/O) double emulsions were formed by 7 wt% native corn starch and high-amylose starch with 60 % and 75 % amylose contents investigated by optical microscopy. Furthermore, the storage stability of double emulsions was revealed by droplet size distribution, microstructure, backscattering, rheological profiles, and low-field nuclear magnetic resonance (LF-NMR) imaging. Results confirmed that the O/W/O double emulsions stabilized by 7 wt% native corn starch had a smaller mean droplet size (11.400 ± 0.424 μm) and excellent storage stability (14 days) than O/W/W and O/W/O double emulsions prepared with high-amylose starch. Such unique double emulsions prepared with gelatinized native corn starch are good candidates of carrier materials.

Self-Assembled Cationic-Covered Nanoemulsion as A Novel Biocompatible Immunoadjuvant for Antiserum Production Against Tityus serrulatus Scorpion Venom

This study assesses the efficacy of different nanoemulsion formulations as new and innovative adjuvants for improving the in vivo immunization against the Tityus serrulatus scorpion venom. Nanoemulsions were designed testing key-variables such as surfactants, co-solvents, and the influence of the temperature, which would be able to induce the phase transition from a liquid crystal to a stable nanoemulsion, assessed for four months. Additionally, cationic-covered nanoemulsion with hyper-branched poly(ethyleneimine) was prepared and its performance was compared to the non-cationic ones. The physicochemical properties of the selected nanoemulsions and the interactions among their involved formulation compounds were carefully monitored. The cytotoxicity studies in murine macrophages (RAW 264.7) and red blood cells were used to compare different formulations. Moreover, the performance of the nanoemulsion systems as biocompatible adjuvants was evaluated using mice immunization protocol. The FTIR shifts and the zeta potential changes (from -18.3 ± 1.0 to + 8.4 ± 1.4) corroborated with the expected supramolecular anchoring of venom proteins on the surface of the nanoemulsion droplets. Cell culture assays demonstrated the non-toxicity of the formulations at concentrations less than 1.0 mg/mL, which were able to inhibit the hemolytic effect of the scorpion venom. The cationic-covered nanoemulsion has shown superior adjuvant activity, revealing the highest IgG titer in the immunized animals compared to both the non-cationic counterpart and the traditional aluminum adjuvant. In this approach, we demonstrate the incredible potential application of nanoemulsions as adjuvants, using a nanotechnology platform for antigen delivery system on immune cells. Additionally, the functionalization with hyper-branched poly(ethyleneimine) enhances this recognition and improves its action in immunization.

The emulsifying and foaming properties of Amuniacum gum (Dorema ammoniacum) in comparison with gum Arabic

In this study, the emulsifying and foaming properties of a novel exudate gum from Dorema ammoniacum (AMG) were assessed in comparison with the well-known gum Arabic from Acacia tree (GAC). The sunflower oil-based emulsion (10% v/v) containing various concentrations (5%-15% w/v) of AMG and GAC was prepared. At all concentrations, AMG showed higher surface and interface activity than GAC. Increasing in AMG and GAC concentrations caused to increase and decrease in Z average, respectively. Overall, the GAC-stabilized emulsion showed lower Z average and PDI value than the AMG-stabilized emulsion during storage time. The sample containing AMG showed higher emulsion capacity and lower emulsion stability in comparison with the one containing GAC at all concentrations. The storage stability decreased and increased with increasing in AMG and GAC concentrations, respectively. After two-week storage, the emulsions containing 10 and 15% AMG showed higher phase separation than those containing GAC; however, this was opposite about sample containing 5% AMG. At thermal, centrifuge, and freezing conditions, the emulsion containing 5% AMG indicated significantly higher stability than GAC samples; however, at higher concentration, opposite effect could be observed. The foaming capacity of the samples containing AMG increased from 81% to 93% by increasing gum concentration from 5% to 15%. The solutions containing AMG showed higher foam capacity than control samples (without gum) and those containing GAC at all concentrations. Increasing in AMG and GAC concentrations slightly improved foam stability, and the highest value (92%) belonged to 15% AMG solution.