Edible films made from blends of gelatin and polysaccharide-based emulsifiers - A comparative study

Release kinetic modeling of Satureja Khuzestanica Jamzad essential oil from fish gelatin/succinic anhydride starch nanocomposite films: The effects of temperature and nanocellulose concentration

Fish gelatin (FG) and octenyl succinic anhydride starch (OSAS) composite films loaded with 1, 2, 3 and 4 wt% bacterial nanocellulose (BNC) and Satureja Khuzestanica Jamzad essential oil (SKEO) were achieved successfully and their physicochemical and release properties were investigated. The results revealed that incorporation of BNC improved the tensile strength which was associated with FE-SEM, FTIR and XRD. Moreover, this study focused on the release modeling of SKEO in 4, 25 and 37 °C from nanocomposite films using different release kinetic and Arrhenius models. Also, analysis of variance-simultaneous component analysis (ASCA) and exploratory data visualization by principal component analysis (PCA) were carried out to investigate the effects of two controlled factors. Consequently, the Peleg model showed the best fitting of experimental data. The activation energies decreased by increasing the BNC concentration. This research demonstrated the nanocomposite film containing SKEO would be a suitable candidate for active food packaging.

A novel biopolymeric composite edible film based on sunnhemp protein isolate and potato starch incorporated with clove oil: Fabrication, characterization, and amino acid composition

Composite edible films were developed by casting method using sunnhemp protein isolate (SHPI) and potato starch (PS) at various proportions (100:0, 90:10, 80:20; 70:30, 60:40, and 50:50) containing glycerol as a plasticizer and clove oil. All the edible films were evaluated for thickness, moisture content, solubility, swelling ratio, water activity. Further characterization of edible films was done on the basis of mechanical, optical, thermal and structural attributes along with morphology. Among all the films, composite film containing 50 % SHPI, 50 % PS and 1 % clove oil were having better characteristics. The solubility and WVP decreased, while the tensile strength and elongation at break of composite film increased with the inclusion of potato starch and clove oil. Intermolecular interactions in the composite film matrix were confirmed by FTIR and XRD analysis. SEM images confirmed the structural compactness and integrity of all the developed films. The amino acid composition of edible films indicated presence of most of the essential amino acids. The present finding of this research work shows that the utilization of sunnhemp protein in the development of biocomposite edible films represents an alternative opportunity of sustainable edible food packaging.

Physico-Chemical Characteristics of pH-Driven Active Film Loading with Curcumin Based on the Egg White Protein and Sodium Alginate Matrices

The low solubility and stability of fat-soluble curcumin in water limit its application in active packaging. This study explored the use of a pH-driven method to investigate the preparation and enhancement of the performance of films loaded with curcumin in a matrix of sodium alginate (Alg) and egg white protein (EWP). In this study, the EWP, Alg, and curcumin primarily bind through hydrogen bonding, electrostatic interactions, and hydrophobic interactions. Compared to EWP films, the films loaded with curcumin through the pH-driven method exhibited enhanced extensibility and water resistance, with an elongation at break (EB) of 103.56 ± 3.13% and a water vapor permeability (WVP) of 1.67 ± 0.03 × 10-10 g·m/m2·Pa·s. The addition of Alg improved the encapsulation efficiency and thermal stability of curcumin, thereby enhancing the antioxidant activity of the film through the addition of 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radicals, which resulted in 106.95 ± 2.61 μg TE/g and 144.44 ± 8.89 μg TE/g, respectively. It is noteworthy that the detrimental effect of Alg on the color responsiveness of films containing curcumin has also been observed. This study provides a potential strategy and consideration for the loading of low water-soluble active substances and the preparation of active packaging.

Investigation of the Structure-Forming Potential of Protein Components in the Reformulation of the Composition of Edible Films

To optimize the functional properties of edible films or coatings, mixtures of several ingredients are used, including food processing by-products. In this way, pectin from fruit pomace, whey proteins from whey as a by-product of rennet cheese production, and gelatin from by-products of the processing of slaughtered animals can be obtained. The aim and scope of the investigation were to verify the hypothesis of the research, which assumes that the addition of beef broth to edible gelatin films will affect the gelation processes of the tested film-forming solutions and will allow for the modification of the edible properties of the films obtained based on these solutions. Measurements were carried out to determine the visual parameters, mechanical strengths, surface and cross-sectional structures, FTIR spectra, thermal degradation rates, and hydrophilicities of the prepared gelatin films. The water content, water vapor permeability, and course of water vapor sorption isotherms of the films were also examined, as well as the course of the gelation process for film-forming solutions. The addition of broth to film-forming solutions was found to increase their opacity and color saturation, especially for the ones that were yellow. The films with the addition of broth were more uneven on the surface and more resistant to stretching, and in the case of the selected types of gelatins, they also formed a more stable gel. The broth increased the hydrophilicity and permeability of the water vapor and reduced the water content of the films. The addition of broth enables the practical use of edible films, but it is necessary to modify some features.

Advances of blend films based on natural food soft matter: Multi-scale structural analysis

The blend films made of food soft matter are of growing interest to the food packaging industries as a pro-environment packaging option. The blend films have become a novel pattern to replace traditional plastics gradually due to their characteristics of biodegradability, sustainability, and environmental friendliness. This review discussed the whole process of the manufacturing of food soft matter blend films from the raw material to the application due to multi-scale structural analysis. There are 3 stages and 12 critical analysis points of the entire process. The raw material, molecular self-assembly, film-forming mechanism and performance test of blend films are investigated. In addition, 11 kinds of blend films with different functional properties by casting are also preliminarily described. The industrialization progress of blend films can be extended or facilitated by analysis of the 12 critical analysis points and classification of the food soft matter blend films which has a great potential in protecting environment by developing sustainable packaging solutions.

Characterization of a Dihydromyricetin/α-Lactoalbumin Covalent Complex and Its Application in Nano-emulsions

A dihydromyricetin (DMY)/α-lactoalbumin (α-La) covalent complex was prepared and characterized, and its application in nano-emulsions was also evaluated in this study. The results suggested that the covalent complex could be obtained using the alkaline method. The UV and IR spectra confirmed the formation of the covalent complex, and the amount of DMY added was positively correlated with the total phenol content of the complex. The complex had an outstanding 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS)-radical-scavenging ability, reducing power and α-glucosidase inhibitory activity, which were positively related to its total phenol content. The complex could be used as an emulsifier to stabilize the β-carotene-loaded nano-emulsion. The stability and β-carotene-protective capacity of the nano-emulsion stabilized by the complex were also positively related to the total phenol content of the complex, being higher than those of the nano-emulsion developed using α-La. Our results provide a reference for the construction of a new food delivery system and extend the applications of α-La and DMY in foods.

Construction of a Ternary Composite Colloidal Structure of Zein/Soy Protein Isolate/Sodium Carboxymethyl Cellulose to Deliver Curcumin and Improve Its Bioavailability

This work presents the fabrication of ternary nanoparticles (Z/S/C NPs) comprising zein (Z), soy protein isolate (SPI) and carboxymethylcellulose sodium (CMC-Na) through a pH-driven method. The results showed that the smallest particle size (71.41 nm) and the most stable zeta potential, measuring -49.97 mV, were achieved with the following ratio of ternary nanoparticles Z/SPI/CMC-Na (2:3:3). The surface morphology of the nanoparticles was further analyzed using transmission electron microscopy, and the synthesized nanoparticles were utilized to encapsulate curcumin (Cur), a hydrophobic, bioactive compound. The nanoparticles were characterized using a particle size analyzer, infrared spectroscopy, and X-ray diffraction (XRD) techniques. The results revealed that the formation of nanoparticles and the encapsulation of Cur were driven by electrostatic, hydrogen-bonding and hydrophobic interactions. The drug loading efficiency (EE%) of Z/S/C-cur nanoparticles reached 90.90%. The Z/S/C ternary nanoparticles demonstrated enhanced storage stability, photostability and simulated the gastrointestinal digestion of Cur. The release of Cur and variations in the particle size of nanoparticles were investigated across different stages of digestion. The biocompatibility of the Z/S/C ternary nanoparticles was assessed by conducting cell viability assays on HepG2 and L-O2 cells, which showed no signs of cytotoxicity. These results suggested that the ternary composite nanoparticles have potential in delivering nutritional foods and health-promoting bioactive substances.

Agaricus blazei Murill polysaccharides/alginate/poly(vinyl alcohol) blend as dressings for wound healing

Macromolecules with antioxidant properties such as polysaccharides from Agaricus blazei Murill mushroom (PAbs) are an excellent option for manufacturing wound dressings. Based on this, this study aimed to analyze preparation, physicochemical characterization, and assessment of the potential wound-healing activity of films based on sodium alginate and polyvinyl alcohol loaded with PAbs. PAbs did not significantly alter the cell viability of human neutrophils in a concentration range of 1-100 μg mL^-1. The Infrared Spectroscopy (FTIR) indicates that the components present in the films (PAbs/Sodium Alginate (SA)/Polyvinyl Alcohol (PVA)) present an increase in hydrogen bonds due to the increase of hydroxyls present in the components. Thermogravimetry (TGA), Differential Scanning Calorimetry (DSC) and X-ray Diffraction (XRD) characterizations indicate a good miscibility between the components where PAbs increasing the amorphous characteristics of the films and that the addition of SA increased the mobility of the chains PVA polymers. The addition of PAbs to films significantly improves properties such as mechanical, thickness, and water vapor permeation. The morphological study evidenced good miscibility between the polymers. The wound healing evaluation indicated that F100 film presented better results from the fourth day onward compared to the other groups. It favored the formation of a thicker dermis (476.8 ± 18.99 μm), with greater collagen deposition and a significant reduction in malondialdehyde and nitrite/nitrate, markers of oxidative stress. These results indicate that PAbs is a candidate for wound dressing.

Effect of Surfactant Formula on the Film Forming Capacity, Wettability, and Preservation Properties of Electrically Sprayed Sodium Alginate Coats

Surfactants are always added to coating formulations to ensure good adhesion of edible coatings to a product's surface and to maintain freshness. In this study, the effects of the mix surfactants Tween 20 and Span 80 with different hydrophile-lipophile balance (HLB) values on the film-forming ability, wettability, and preservation capacity of blueberry sodium alginate coating were investigated. The results indicated that Tween 20 obviously ensured favorable wettability and improved the uniformity and mechanical properties of the resulting film. While the addition of Span 80 reduced the mean particle size of the coating, enhanced the water resistance of the film, and helped to reduce blueberry weight loss. A sodium alginate coating with low viscosity and medium HLB could better inhibit the galactose, sucrose, and linoleic acid metabolism of blueberries, reduce the consumption of phenols, promote the accumulation of flavonoids, and thus display superior coating performance. In summary, sodium alginate coating with medium HLB had comprehensive advantages in film-forming ability and wettability and was conducive to the fresh-keeping role.

Antioxidant polysaccharide/gelatin blend films loaded with curcumin - A comparative study

Curcumin (CUR; 0, 0.005, 0.01, 0.02 %) was loaded into binary 75/25 blend films based on polysaccharides (carboxymethyl cellulose (CMC), gum Arabic (GAR), octenyl succinic anhydride modified starch (OSA), water-soluble soy polysaccharides (WSSP)) and gelatin (GEL). The GAR-based system was the least rough and, consequently, the most transparent of the films. An opposite result was found for the WSSP-based film. Despite the phase separation, the CMC75/GEL25 film exhibited excellent mechanical strength and stiffness. CUR improved the UV/VIS light-barrier characteristics of the films, but did not affect most of other physiochemical properties. X-ray diffractograms revealed that CUR provoked the rearrangement of the triple helical structure of GEL. As highly erodible, the CMC75/GEL25 carrier ensured the fastest and the most complete release of CUR. The OSA75/GEL25 system exhibited an opposite behavior. The kinetic profiles of the antiradical activity of the films did not reflect CUR release. A comparison of 2,2-diphenyl-1-picrylhydrazyl (DPPH*) scavenging on the plateau revealed that the CUR-supplemented films had quite comparable antiradical potential. The CMC75/GEL25 system exhibited the highest colorimetric stability, likely as a result of complete encapsulation of CUR in the GEL-rich microspheres. Weak symptoms of physical aging (enthalpy relaxation) were found in the films.

Recent developments in improving the emulsifying properties of chitosan

Chitosan is one of the valuable products obtained from crustacean waste. The unique characteristics of chitosan (antimicrobial, antioxidant, anticancer, and anti-inflammatory) have increased its application in various sectors. Besides unique biological properties, chitosan or chitosan-based compounds can stabilize emulsions. Nevertheless, studies have shown that chitosan cannot be used as an efficient stabilizer because of its high hydrophilicity. Hence, this review aims to provide an overview of recent studies dealing with improving the emulsifying properties of chitosan. In general, two different approaches have been reported to improve the emulsifying properties of chitosan. The first approach tries to improve the stabilization property of chitosan by modifying its structure. The second one uses compounds such as polysaccharides, proteins, surfactants, essential oils, and polyphenols with more wettability and emulsifying properties than chitosan's particles in combination with chitosan to create complex particles. The tendency to use chitosan-based particles to stabilize Pickering emulsions has recently increased. For this reason, more studies have been conducted in recent years to improve the stabilizing properties of chitosan-based particles, especially using the electrostatic interaction method. In the electrostatic interaction method, numerous research has been conducted on using proteins and polysaccharides to increase the stabilizing property of chitosan.

The Green Era of Food Packaging: General Considerations and New Trends

Recently, academic research and industries have gained awareness about the economic, environmental, and social impacts of conventional plastic packaging and its disposal. This consciousness has oriented efforts towards more sustainable materials such as biopolymers, paving the way for the “green era” of food packaging. This review provides a schematic overview about polymers and blends of them, which are emerging as promising alternatives to conventional plastics. Focus was dedicated to biopolymers from renewable sources and their applications to produce sustainable, active packaging with antimicrobial and antioxidant properties. In particular, the incorporation of plant extracts, food-waste derivatives, and nano-sized materials to produce bio-based active packaging with enhanced technical performances was investigated. According to recent studies, bio-based active packaging enriched with natural-based compounds has the potential to replace petroleum-derived materials. Based on molecular composition, the natural compounds can diversely interact with the native structure of the packaging materials, modulating their barriers, optical and mechanical performances, and conferring them antioxidant and antimicrobial properties. Overall, the recent academic findings could lead to a breakthrough in the field of food packaging, opening the gates to a new generation of packaging solutions which will be sustainable, customised, and green.

Functional Properties and Storage Stability of Astaxanthin-Loaded Polysaccharide/Gelatin Blend Films—A Comparative Study

Edible films were obtained from the aqueous binary 75/25 blends of polysaccharides (carboxymethyl cellulose (CMC), gum Arabic (GAR), octenyl succinic anhydride starch (OSA), and water-soluble soy polysaccharides (WSSP)) and gelatin (GEL) supplemented with increasing concentrations (0, 0.25, 0.5, and 1% w/w) of water-soluble AstaSana (AST) astaxanthin. The AST-loaded films were red and exhibited a grainy microstructure and reduced transparency. The CMC- and WSSP-based films were the best UV-C blockers. After the incorporation of 1% AST, the antiradical activity of the films increased by 1.5 times (~25 percentage points) compared to the controls. The tensile strength (TS) of the CMC-containing films was much higher than those of the other films (36.88–43.04 vs. 2.69–15.62 MPa). AST decreased the TS of the CMC/GEL film (by ~11–14%) but improved the mechanical cohesiveness of the GAR/GEL film (by ~50%). The storage test (at 25 °C and 60 °C, no light access) revealed that the CMC- and GAR-based films exhibited the lowest colour change. Furthermore, at the elevated temperature, the films with higher AST concentration exhibited a better ability to maintain their colour. The WSSP/GEL films were the most prone to darkening and yellowing, possibly due to the Maillard reaction. Moreover, these films had the weakest antiradical activity.

A Comprehensive Study on Gelatin- and Whey Protein Isolate-Based Edible Films as Carriers of Fireweed (Epilobium angustifolium L.) Extract

Gelatin (GEL) and whey protein isolate (WPI) are often taken into account as carriers of phytoantioxidants for developing active packaging. The materials obtained, however, have not yet been systematically compared to demonstrate their potential benefits and drawbacks. Fireweed extract (FE) is a rich source of polyphenols with high antioxidant activity. Therefore, in this study, the structural, physicochemical, and antiradical properties of GEL and WPI films incorporated with freeze-dried fireweed extract (FE; 0, 0.0125, 0.025, 0.05%) were simultaneously evaluated. As verified by X-ray diffraction, the GEL-based films were more crystalline and, consequently, mechanically stronger (~ 9–11 vs. ~ 6 MPa) and less permeable to water vapor than the WPI films (44.95–52.02 vs. 61.47–70.49 g mm m−2 day−1 kPa−1). Furthermore, GEL offered a bit more transparent, less yellow, and more stretchable films (~ 50–59% vs. ~ 26%). In turn, the WPI films had superior UV-protective potential. The higher FE concentration yielded more yellow films with improved UV-blocking ability. The FE (0.05%) made the GEL cryogel denser. Based on the half-time reduction of 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical cation (tABTS50%), the 0.025, and 0.05% FE-supplemented WPI films exhibited ~ 1.6 and ~ 1.9 times better antiradical potential than the GEL counterparts. This result implies that the WPI-based films, being more soluble (35.12–36.74 vs. 31.51–33.21%) and less swellable (192.61–205.88 vs. 1056.93–2282.47%), ensured faster release of FE into aqueous medium. The slower building up of the antiradical activity of the FE-supplemented GEL films suggests that GEL could be more useful in the development of slow/less migratory active packaging systems for high moisture food.

Development and Characterization of Pullulan-Carboxymethyl Cellulose Blend Film for Packaging Applications

Edible packaging materials have widespread applications in pharmaceutical industries. In this study, the physical, thermal, colour, mechanical, and water barrier properties of a novel edible film based on pullulan (PUL) and carboxymethyl cellulose (CMC) were investigated. The blend films were made by the solution casting method with 3 g of total solid content. The following percentages of 100/0, 75/25, 50/50, 25/75, and 0/100 were used to prepare the films. Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA) were used to analyze the interaction between PUL and CMC. At the level of 75/25 percentage of PUL, CMC film showed the lowest EAB% (5.55%), the highest values for TS (17.30 MPa), WVP value ( $4.12\times {10}^{-10}$  g m-1s-1Pa-1), and water contact angle of 63.43°. By increasing the CMC concentration, blend films became slightly greenish and yellowish but appeared transparent with UV blocking ability. This study reveals that 75/25 (PUL/CMC) blend film has a good potential that can be used in producing edible packaging films to protect the quality of pharmaceutical products with interesting specifications.

Gelatin/Chitosan Films Incorporated with Curcumin Based on Photodynamic Inactivation Technology for Antibacterial Food Packaging

Photodynamic inactivation (PDI) is a new type of non-thermal sterilization technology that combines visible light with photosensitizers to generate a bioactive effect against foodborne pathogenic bacteria. In the present investigation, gelatin (GEL)/chitosan (CS)-based functional films with PDI potency were prepared by incorporating curcumin (Cur) as a photosensitizer. The properties of GEL/CS/Cur (0.025, 0.05, 0.1, 0.2 mmol/L) films were investigated by evaluating the surface morphology, chemical structure, light transmittance, and mechanical properties, as well as the photochemical and thermal stability. The results showed a strong interaction and good compatibility between the molecules present in the GEL/CS/Cur films. The addition of Cur improved different film characteristics, including thickness, mechanical properties, and solubility. More importantly, when Cur was present at a concentration of 0.1 mM, the curcumin-mediated PDI inactivated >4.5 Log CFU/mL (>99.99%) of Listeria monocytogenes, Escherichia coli, and Shewanella putrefaciens after 70 min (15.96 J/cm2) of irradiation with blue LED (455 ± 5) nm. Moreover, Listeria monocytogenes and Shewanella putrefaciens were completely inactivated after 70 min of light exposure when the Cur concentration was 0.2 mM. In contrast, the highest inactivation effect was observed in Vibrio parahaemolyticus. This study showed that the inclusion of Cur in the biopolymer-based film transport system in combination with photodynamic activation represents a promising option for the preparation of food packaging films.

Study of the microstructure of chitosan aerogel beads prepared by supercritical CO2 drying and the effect of long-term storage

In order to investigate the pore properties and effect of storage time on the microstructure of CO₂-dried aerogels, chitosan aerogel beads were obtained from chitosan hydrogels with an initial concentration in the range of 1.5–3.0 wt% through SCCO₂ drying and freeze-drying (as a comparison). The SCCO₂-dried chitosan aerogels showed a three-dimensional network structure, and had higher BET surface area (200 m² g⁻¹) and higher crystallinity (0.62/XRD, 0.80/ATR-FTIR) than the freeze-dried aerogels. The stability of the microstructure of the SCCO₂-dried chitosan aerogel beads during 10 months was studied. The BET surface area of the aerogel beads at each concentration declined by 30.5% at 2 months, 56.7% at 6 months and 67.2% at 10 months. Accelerated aging tests of the chitosan aerogel beads were carried out to study the effect of humidity on the chitosan aerogel beads. The average diameter of the chitosan aerogel decreased from 2.3 mm to 0.9 mm when stored at 65 °C with 90% relative humidity (RH). In contrast, there was no obvious change during storage at 65 °C with 20% RH. The amount of adsorbed water increased from 4% to 12% at 65 °C with 90% RH for 96 h, and the bound water content of the aerogel beads gradually increased. This study demonstrates that SCCO₂-dried chitosan aerogel beads could be better at maintaining their mesoporous structure, and the adsorption of water from the surrounding air had a significant effect on the microstructure and shrinkage of the chitosan aerogel beads.

Chitosan aerogel beads prepared by different drying methods were compared, and the effects of long-term storage and humidity on the structure were investigated.

Recent Advancements in Microbial Polysaccharides: Synthesis and Applications

Polysaccharide materials are widely applied in different applications including food, food packaging, drug delivery, tissue engineering, wound dressing, wastewater treatment, and bioremediation sectors. They were used in these domains due to their efficient, cost-effective, non-toxicity, biocompatibility, and biodegradability. As is known, polysaccharides can be synthesized by different simple, facile, and effective methods. Of these polysaccharides are cellulose, Arabic gum, sodium alginate, chitosan, chitin, curdlan, dextran, pectin, xanthan, pullulan, and so on. In this current article review, we focused on discussing the synthesis and potential applications of microbial polysaccharides. The biosynthesis of polysaccharides from microbial sources has been considered. Moreover, the utilization of molecular biology tools to modify the structure of polysaccharides has been covered. Such polysaccharides provide potential characteristics to transfer toxic compounds and decrease their resilience to the soil. Genetically modified microorganisms not only improve yield of polysaccharides, but also allow economically efficient production. With the rapid advancement of science and medicine, biosynthesis of polysaccharides research has become increasingly important. Synthetic biology approaches can play a critical role in developing polysaccharides in simple and facile ways. In addition, potential applications of microbial polysaccharides in different fields with a particular focus on food applications have been assessed.

Corn starch and methylcellulose edible films incorporated with fireweed (Chamaenerion angustifolium L.) extract: Comparison of physicochemical and antioxidant properties

The properties of edible films derived from corn starch (CS) and methylcellulose (MC) supplemented with fireweed extract (FE; 0.0125-0.05% w/w) were analyzed. Due to their more crystalline structure, the MC films were significantly stronger (~26 MPa) than the CS films (~4 MPa). In turn, CS produced films with lower water vapor permeability (WVP, 50.12-51.74 vs. 56.52-59.10 g mm m^-2 d^-1 kPa^-1). The hydrothermally-disrupted starch granules contributed to high roughness and opacity of the CS films. The FE-supplemented films exhibited an intensive yellow color and improved the UV-absorbing effect. FE delayed starch retrogradation, as indicated by the reduced crystallinity and slightly improved transparency of the CS films. Incorporation of FE significantly enhanced the released radical scavenging activity (RSA) of the films, while did not affect the WVP and mechanical properties. Due to better FE-trapping capacity, the CS-based films exhibited lower antioxidant activity (RSA_60min = 2.21-19.75%) as compared to the MC counterparts (RSA_60min = 4.87-38.31%).

Scientific information about sugar-based emulsifiers: a comprehensive review

The instantaneous demand for foods, detergents, cosmetics, and personal care products that can be commercialized with value-added benefits including natural origin, environmental friendliness, and sustainability is increasing day by day. Accordingly, the associated industries are trying to identify bioactive ingredients that may be natural alternatives to synthetic ones. This review article is mainly aimed at the classification of natural saccharide-based emulsifiers (which are mainly bio-surfactants), their methods of preparation and their various types of applications in daily life activities. Different routes of production of mono and polysaccharide-based emulsifiers and their industrial advantages are exclusively highlighted. The readers can get an approach on how sugar-based emulsifiers are synthesized and used in the pharmaceutical, food, and personal care industries to contribute excellent physicochemical properties and feature excellent functional characteristics. Many of the synthetic procedures are associated with the use of natural ingredients to prepare emulsions concerning “eco-friendly” selective materials. In this report, an endeavour has been made towards contextual examples for the production methods of some saccharide-based emulsifiers and their advantages in various fields.

Amphiphilic natural emulsifiers form tiny droplets of oil-in-water stable emulsions and are very much effective for industries.

Mathematical Modeling of Water-Soluble Astaxanthin Release from Binary Polysaccharide/Gelatin Blend Matrices

Water-soluble AstaSana astaxanthin (AST) was loaded into 75/25 blend films made of polysaccharides (carboxymethyl cellulose (CMC), gum Arabic (GAR), starch sodium octenyl succinate (OSA), water-soluble soy polysaccharides (WSSP)) and gelatin (GEL) at levels of 0.25, 0.5, and 1%, respectively. Due to the presence of starch granules in the AST formulation, the supplemented films exhibited increased surface roughness as compared to the AST-free films. Apart from the CMC/GEL carrier, the migration of AST to water (25 °C, 32 h) was incomplete. Excluding the CMC-based carrier, the gradual rise in the AST concentration decreased the release rate. The Hopfenberg with time lag model provided the best fit for all release series data. Based on the quarter-release times (t25%), the 0.25% AST-supplemented OSA/GEL film (t25% = 13.34 h) ensured a 1.9, 2.2, and 148.2 slower release compared to the GAR-, WSSP- and CMC-based carriers, respectively. According to the Korsmeyer–Peppas model, the CMC-based films offered a quasi-Fickian release of AST (n < 0.5) with the burst effect (t100% = 0.5–1 h). In general, the release of AST from the other films was multi-mechanistic (n > 0.5), i.e., controlled at least by Fickian diffusion and the polymer relaxation (erosion) mechanism. The 1% AST-added WSSP/GEL system provided the most linear release profile.

Potentials of polysaccharides, lipids and proteins in biodegradable food packaging applications

Bio-based packaging materials are gaining importance due to their biodegradability, sustainability and environmental friendliness. To control the food quality and improve the food safety standards, proteins polysaccharide and lipid-based packaging films are enriched with bioactive and functional substances. However, poor permeability and mechanical characteristics are the challenging areas in their commercialization. Scientists and researchers are using a combination of techniques i.e. hydrogels, crosslinking, etc. to improve the intermolecular forces between different components of the film formulation to counter these challenges More recently, biodegradable packaging materials, sometimes edible, are also used for the delivery of functional ingredients which reveals their potential for drug delivery to counter the nutrient deficiency problems. This study highlights the potentials of bio-based materials i.e. proteins, polysaccharides, lipids, etc. to develop biodegradable packaging materials. It also explores the additives used to improve the physicochemical and mechanical properties of biodegradable packaging materials. Furthermore, it highlights the novel trends in biodegradable packaging from a food safety and quality point of view.

Recent Advances in the Development of Smart and Active Biodegradable Packaging Materials

Interest in the development of smart and active biodegradable packaging materials is increasing as food manufacturers try to improve the sustainability and environmental impact of their products, while still maintaining their quality and safety. Active packaging materials contain components that enhance their functionality, such as antimicrobials, antioxidants, light blockers, or oxygen barriers. Smart packaging materials contain sensing components that provide an indication of changes in food attributes, such as alterations in their quality, maturity, or safety. For instance, a smart sensor may give a measurable color change in response to a deterioration in food quality. This article reviews recent advances in the development of active and smart biodegradable packaging materials in the food industry. Moreover, studies on the application of these packaging materials to monitor the freshness and safety of food products are reviewed, including dairy, meat, fish, fruit and vegetable products. Finally, the potential challenges associated with the application of these eco-friendly packaging materials in the food industry are discussed, as well as potential future directions.

Gum Arabic/Gelatin and Water-Soluble Soy Polysaccharides/Gelatin Blend Films as Carriers of Astaxanthin-A Comparative Study of the Kinetics of Release and Antioxidant Properties

Polymer blending and incorporation of active substances offer a possibility of generation of novel packaging materials with interesting features. Astaxanthin is one of the most powerful antioxidants. Hence, in this study, water-soluble AstaSana astaxanthin (AST) was incorporated into 75/25 gum arabic/gelatin (GAR75/GEL25) and water-soluble soy polysaccharides/gelatin (WSSP75/GEL25) blend films in different concentrations (0, 0.25%, 0.5%, 1%). Microscope images showed good compatibility between the polysaccharides and GEL. Basing on time required for 50% release, the WSSP-based film exhibited an approximately four-fold slower release rate (t_50% = 65.16–142.80 min) than the GAR-based film (t_50% = 14.64–34.02 min). This result was mainly ascribed to the slower dissolution of the WSSP-based carrier. The faster release rate of the GAR-based films resulted in stronger antioxidant activity (quarter-scavenging time (t_25%ABTS) = 0.22–7.51 min) in comparison to the WSSP-based films (t_25%ABTS = 0.91–12.94 min). The increase in the AST concentration was accompanied by gradually reduced solubility and the release rate. It is possible that the increasing number of starch granules (from the AST formulation) acted as a dissolution blocking agent. In general, the WSSP75/GEL25 film displayed the most linear (the Zero-order similar) release profile. So, this carrier has potential for release of AST at a quasi-constant speed.

Edible packaging: Sustainable solutions and novel trends in food packaging

Novel food packaging techniques are an important area of research to promote food quality and safety. There is a trend towards environmentally sustainable and edible forms of packaging. Edible packaging typically uses sustainable, biodegradable material that is applied as a consumable wrapping or coating around the food, which generates no waste. Numerous studies have recently investigated the importance of edible materials as an added value to packaged foods. Nanotechnology has emerged as a promising method to provide use of bioactives, antimicrobials, vitamins, antioxidants and nutrients to potentially increase the functionality of edible packaging. It can act as edible dispensers of food ingredients as encapsulants, nanofibers, nanoparticles and nanoemulsions. In this way, edible packaging serves as an active form of packaging. It plays an important role in packaged foods by desirably interacting with the food and providing technological functions such as releasing scavenging compounds (antimicrobials and antioxidants), and removing harmful gasses such as oxygen and water vapour which all can decrease products quality and shelf life. Active packaging can also contribute to maintaining the nutritive profile of packaged foods. In this review, authors present the latest information on new technological advances in edible food packaging, their novel applications and provide examples of recent studies where edible packaging possesses also an active role.

Characterization and antibacterial activity of edible films based on carboxymethyl cellulose, Dioscorea opposita mucilage, glycerol and ZnO nanoparticles

The edible films composed ofcarboxymethyl cellulose (CMC), glycerol, mucilage from Chinese yam (DOM)and ZnO nanoparticles (ZnO-NPs), were prepared by a casting method. To evaluate the applicability for food packaging, prepared films were characterised morphological, physical, rheological, mechanical and barrier properties, performed FT-IR, thermal analysis, and finally investigated the antibacterial activity and acute oral toxicity of films. The surface of films presented irregular arrangement with nanoparticles combined in the networks, suggesting the best "CMC to DOM weight ratio" of approximately 1:1 could provide a smooth surface. The films with 2.0 g ZnO-NPs presented antibacterial effects against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria. With the increase of DOM, the antibacterial rate dropped at 400 and 450 μL/mL. The film-forming solutions with higher ZnO-NPs content display shear-thinning properties and liquid-like behaviour. The edible films have a great potential to be used in application in food packaging.

Whey Protein Concentrate/Isolate Biofunctional Films Modified with Melanin from Watermelon (Citrullus lanatus) Seeds

Valorization of food industry waste and plant residues represents an attractive path towards obtaining biodegradable materials and achieving "zero waste" goals. Here, melanin was isolated from watermelon (Citrullus lanatus) seeds and used as a modifier for whey protein concentrate and isolate films (WPC and WPI) at two concentrations (0.1% and 0.5%). The modification with melanin enhanced the ultraviolet (UV) blocking, water vapor barrier, swelling, and mechanical properties of the WPC/WPI films, in addition to affecting the apparent color. The modified WPC/WPI films also exhibited high antioxidant activity, but no cytotoxicity. Overall, the effects were melanin concentration-dependent. Thus, melanin from watermelon seeds can be used as a functional modifier to develop bioactive biopolymer films with good potential to be exploited in food packaging and biomedical applications.

Functional Properties of Biopolymer-Based Films Modified with Surfactants: A Brief Review

An increase of environmental awareness recently has increased the interest of researchers in using of biopolymer-based films. The films have been prepared extensively by utilizing starch, carboxymethyl cellulose, chitosan, protein, gelatin, carrageenan, alginate, pectin, guar gum and pullulan. They are typically modified with surface-active agents (surfactants) such as glycerol monostearate, sucrose ester, sodium stearoyl lactate, sodium dodecyl sulfate, ethyl lauroyl arginate HCl, Span 20 to 80, Tween-20 to 80 and soy lecithin for improving the functional properties of the films. In this brief review, two types of biopolymer-based films that prepared through casting method were categorized, specifically solution- and emulsion-based films. The four types of surfactants, namely non-ionic, anionic, cationic and amphoteric surfactants that are regularly used to modify biopolymer-based films are also described. The functional properties of the films modified with different types of surfactants are briefly reviewed. This study enhances the attraction of researchers in biopolymer-based films and the improvement of new concepts in this niche area.

Changes in microstructure and rheological properties of konjac glucomannan/zein blend film-forming solution during drying

During film formation at 60 °C, the microstructure and rheological properties of konjac glucomannan (KGM) film-forming solution and KGM/zein blend film-forming solution were investigated. The drying process of film-forming solutions was divided into two stages according to the drying curves. Scanning electron microscopy showed that KGM chains in the blend solution aggregated into thicker chains and formed a molecular network with larger pores. Zein particles grew larger but were homogeneously distributed during drying as observed by confocal laser scanning microscopy. The addition of zein improved the thermal stability of the film-forming solution. As the drying proceeded (up to 8 h), KGM solution exhibited a typical concentrated solution behavior due to molecular entanglement; whereas the blend solution gradually formed a weak gel after 2 h. Complex viscosity data for the film-forming solutions were well-fitted by the power-law model. The information obtained from the study is important for understanding the film-forming mechanism.

Polysaccharide/gelatin blend films as carriers of ascorbyl palmitate - A comparative study

The comparative study was performed in order to assess the most suitable matrix polymer for ascorbyl palmitate (AP). The antioxidant (1 and 2% w/w) was loaded into the 75/25 blend films based on polysaccharides (gum Arabic (GAR), octenyl succinic anhydride modified starch (OSA), water soluble soy polysaccharides (WSSP)) and gelatin (GEL). The AP was present in the films both in the form of longitudinal crystals and microglobules. Because of amphiphilic character, the AP had the moisturizing action on the films; however, its addition reduced film solubility in water. AP did not affect the water vapor permeability and tensile strength of the OSA-based carrier. The Makoid-Banakar with T_lag model was suitable for the efficient simulation of AP release from the films. The OSA-based system offered the fastest release of AP and, consequently, had the best initial antiradical activity. The 1%AP-added GAR75/GEL25 film provided the most extended release of antioxidant capacity.

Effect of eggshell membrane as porogen on the physicochemical structure and protease immobilization of chitosan-based macroparticles

Chitosan-based macroparticle is a common carrier for enzyme immobilization applied in food industry. Driven by the requirement of large carrier pores for the biomacromolecular substrates such as protein, the eggshell membrane powder (ESMP) was employed as multifunctional porogen to improve the physicochemical structure of chitosan-based macroparticles. The prepared macroparticles were characterized by SEM, XRD, FTIR, Raman spectroscopy, nitrogen adsorption-desorption isotherms, and thermogravimetric analysis. The results showed that an increase of ESMP percentage could improve the porosity of macro holes in macroparticles, and it also enlarged the size of mesopores. Moreover, the ESMP significantly increased (P < 0.05) the amount of papain immobilization, whereas the specific activity of immobilized papain achieved a maximum value of 871.95 U/mg at CSESM2 and then declined with the increase of ESMP. Therefore, the inclusion of 20 % ESMP in chitosan-based macroparticles gave the highest activity of its immobilized protease.