Gelling mechanism of RG-I enriched citrus pectin: Role of arabinose side-chains in cation- and acid-induced gelation

Effects of different extraction solvents on the compositions, primary structures, and anti-inflammatory activity of pectin from sweet potato processing by-products

To examine the effects of different solvents on the molecular weight, yield, chemical composition, and bioactivity of pectins, four RG-I type pectins were separately extracted from sweet potato residue (SPR) using hot water extraction (HWSP), sodium hydroxide extraction (SHSP), hydrochloric acid extraction (HASP), and chelating agents (CASP). The results showed that the four pectin samples comprised GalUA, Gal, Rha, Ara, Glc, GlcUA, Man, and Xyl components. Among these components, GalA content was the highest in all four pectins. SHSP exhibited relatively higher yield (3.16 %, w/w). Additionally, SHSP exhibited a lower molecular weight (44.49 kDa) and the largest proportion of the RG-I region (75.42 %) compared with other extraction methods. On the contrary, HASP showed relatively lower yield (2.14 %, w/w), and its corresponding prepared pectin had relatively high molecular weight (69.81 kDa) and the minimum range of RG-I region (46.87 %) compared with HWSP, SHSP, and CASP. The anti-inflammation effect of the four SPR pectin samples was investigated using in vitro experiments. Results showed that all of SPR pectin significantly inhibited the levels of IL-1β, IL-6, and TNF-α in lipopolysaccharide (LPS)-treated iBMDM macrophage cells. The preliminary structure-activity relationship between pectin structure and anti-inflammatory activity was also analyzed. SPR pectin can be developed as a potential bioactive ingredient for applications in the food and medicine industries.

Structural characteristics and gelling properties of citrus pectins after chemical and enzymatic modifications: Conformation plays a vital role in Ca2+-induced gelation

Due to the excellent health benefits of rhamnogalacturonan I (RG-I)-enriched pectin, there has been increasing research interest in its gelling properties. To elucidate its structure-gelation relationship, chemical modifications were used to obtain RG-I-enriched pectin (P11). Then, enzymatic modification was performed to obtain debranched pectins GP11 and AP11, respectively. The effects of RG-I side chains on structural characteristics (especially spatial conformation) and gelling properties were investigated. Among the low-methoxylated pectins (LMPs), AP11, with a loose conformation (Dmax 52 nm) showed the poorest gelling, followed by GP11. In addition to primary structure, spatial conformation (Dmax and Rg) also showed strong correlations (r2 > 0.8) with gelation. We speculate that compact conformation may shorten distance between pectin chains and reduces steric hindrance, contributing to formation of strong gel network. This is particularly important in LMPs with abundant side chains. The results provide novel insights into relationship between spatial conformation and gelling properties of RG-I-enriched pectin.

Controlling strategies of methanol generation in fermented fruit wine: Pathways, advances, and applications

Methanol is widely existed in fermented fruit wines (FFWs), and the concentration is excessive at times due to inappropriate fermentation conditions. Methanol is neurotoxic, and its metabolites of formaldehyde and formic acid can cause organic lesions and central respiratory system disorders. FFWs with unspecified methanol limits are often produced with reference to grape wine standards (250/400 mg/L). To clarify the causes of methanol production in FFWs and minimize the methanol content, this study summarizes the current process methods commonly applied for methanol reduction in FFWs and proposes novel potential controlling strategies from the perspective of raw materials (pectin, pectinase, and yeast), which are mainly the low esterification modification and removal of pectin, passivation of the pectinase activity, and the gene editing of yeast to target the secretion of pectinases and modulation of the glycine metabolic pathway. The modified raw materials combined with optimized fermentation processes will hopefully be able to improve the current situation of high methanol content in FFWs. Methanol detection technologies have been outlined and combined with machine learning that will potentially guide the production of low-methanol FFWs and the setting of methanol limits for specific FFW.

Effect of high-pressure-homogenisation on the interaction between pomegranate peel pectin fractions and anthocyanins in acidic environment

In this study, changes in the basic composition and structural characterisation of water-soluble pectin (WSP), homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) from pomegranate peel were investigated after high-pressure-homogenisation (HPH) at 50 MPa and 300 MPa. The interactions between three pectin and anthocyanin (ACN) complex were also studied. The three pectin fractions were mainly composed of galacturonic acid (34.95%-87.69%), all with low degrees of methyl-esterification ≤41.20%. HPH at 300 MPa increased the binding ratios of ACN to three pectin fractions by 34.22%-34.59%. Changes in the structural characterisation results of pectin confirmed that the depolymerisation and breakdown of the side chains of pectin after HPH promoted electrostatic interactions, hydrogen bond and hydrophobic interaction between pectin and ACN. Correspondingly, the thermal and storage stabilities of ACN in the complex was boosted after HPH at 300 MPa. This study provides insights into the interaction between pectin and ACN under HPH.

Structural analysis and biological activity of cell wall polysaccharides and enzyme-extracted polysaccharides from pomelo (Citrus maxima (Burm.) Merr.)

Pomelo peel is a valuable source of pectin, but research on its cell wall polysaccharides is limited. This study compared the cell wall polysaccharides of pomelo peel, enzyme-extracted polysaccharides of pomelo peel, and enzyme-extracted polysaccharides of whole pomelo fruit. Cell wall polysaccharides, including water-soluble pectin (WSP), chelator-soluble pectin (CSP), sodium carbonate-soluble pectin (NSP), 1 mol/L KOH soluble hemicellulose (KSH-1), and 4 mol/L KOH soluble hemicellulose (KSH-2), were obtained by sequence-extraction method. Total polysaccharides from whole pomelo fruit (TP) and peel-polysaccharides from pomelo pericarps (PP) were obtained using enzyme-extraction method. The structural, thermal, rheological, antioxidant properties, and wound healing effect in vitro were described for each polysaccharide. WSP had a uniform molecular weight distribution and high uronic acid (UA) content, suitable for commercial pectin. NSP had the highest Rhamnose (Rha)/UA ratio and a rich side chain with highest viscosity and water retention. PP displayed the highest DPPH radical scavenging activity and reducing capacity at 0.1 to 2.0 mg/mL concentration range, with an IC50 of 1.05 mg/mL for DPPH free radicals. NSP also demonstrated the highest hydroxyl radical scavenging activity and promoted Human dermal keratinocyte proliferation and migration at 10 μg/mL, suggesting potential applications in daily chemical and pharmaceutical industries.

Structure characterization and gelling properties of RG-I-enriched pectins extracted from citrus peels using four different methods

To facilitate the application of rhamnogalacturonan-I (RG-I)-enriched pectins (RGPs) as novel, healthy, and gelling food additives, this study compared the structural characteristics and gelling properties of RGPs extracted from citrus peel via four methods (alkali: AK, high-temperature/pressure: TP, citric acid: CA, and enzyme-assisted: EA extractions). AK and CA yielded pectins with the highest RG-I proportions (54.8 % and 51.9 %, respectively) by disrupting the homogalacturonan region; TP and EA increased the RG-I proportions by ~10 %. Among the four methods, AK induced the lowest degree of esterification (DE) (6.7 %) and longer side chains that form strong entanglement, contributing to its highest gel hardness. The relatively low DE (18.5 %) of CA RGP facilitated stable gel formation. Notably, its highly branched RG-I region afforded more intramolecular hydrophobic interactions, making a more highly cross-linked gel network of better gel resilience. In contrast, TP induced the highest DE (57 %) and curved molecular chains; it inhibited Ca2+ binding, entanglement, and intramolecular hydrophobic interactions, and thus no gel formed. EA RGP was associated with the lowest molecular size, rendering it more difficult for Ca2+ to form links, which resulted no gel. These findings offer insights into the relationship among the extraction methods, molecular structures, and gelling properties of RGPs.

An optimize adaptable method for determining the monosaccharide composition of pectic polysaccharides

Pectic polysaccharides are considered the highly complex natural plant polysaccharides which plays a vital role in plant tissue structure and human health. Detailed characterization of the monosaccharide composition can provide insights into the pectic polysaccharide structure. Nevertheless, when analyzing the monosaccharides of pectic polysaccharide, it is crucial to address the issue of incomplete hydrolysis that can occur due to the formation of acid-induced precipitates. Based on above, the main purpose of this article is to provide an optimized method for monosaccharide analysis of pectic polysaccharides through acid hydrolysis optimization using high-performance anion exchange chromatography (HPAEC) The results indicate that reducing the sample concentration to 0.5 mg/mL effectively reduces the acid gelling phenomenon and promotes the complete hydrolysis of pectin polysaccharides. The optimized parameters for acid hydrolysis involve 110 °C for 6 h in 2 M TFA. Furthermore, the consistency of this method is assessed, along with its ability to analyze pectin polysaccharides from various fruits. This hydrolysis approach holds promise for enabling accurate quantification of monosaccharide composition in pectic polysaccharides.

Valorisation of Blackcurrant Pomace by Extraction of Pectin-Rich Fractions: Structural Characterization and Evaluation as Multifunctional Cosmetic Ingredient

Blackcurrant pomace is a widely available waste stream derived from the industrial production of juice rich in pectin and unextracted polyphenols. Since pectin, an emerging class of gastrointestinal prebiotics, is also a common cosmetic ingredient, the aim of this work was to evaluate blackcurrant pomace as a source of pectin-rich fractions suitable for application in prebiotic cosmetics. Hereby, this raw material was valorised by sequential extraction of acid-soluble (by citric acid, CAP) and Ca-bound (by ammonium oxalate, AOPP) pectic polysaccharides. Both fractions had favourable physicochemical features and a similar degree of methyl-esterification between low- and high-methoxyl pectin (approx. 50%), but CAP had significantly higher galacturonic acid content (72.3%), branching, and purity. Regardless of that, both had very high oil (18.96 mL/g for CAP and 19.32 mL/g for AOPP) and water (9.97 mL/g for CAP and 7.32 mL/g for AOPP)-holding capacities and excellent emulsifying properties, making them promising cosmetic ingredients. The polyphenol content was 10 times higher in CAP, while corresponding antioxidant activity was 3-fold higher. Finally, the influence of varying CAP and AOPP concentrations on common skin pathogen, Staphylococcus aureus, and beneficial skin bacteria, Staphylococcus epidermidis, was examined. The results show significant prebiotic potential of two pectic fractions since they were capable of selectively stimulating S. epidermidis, while S. aureus growth was inhibited, whereas CAP demonstrated a particularly high capacity of up to 2.2, even with methicillin-resistant S. aureus.

Low-methoxy-pectin and chlorogenic acid synergistically promote lipolysis and β-oxidation by regulating AMPK signaling pathway in obese mice

Chlorogenic acid (CGA) displays various biological activities in preventing high-calorie diet-induced metabolic complications. The absorption efficiency of CGA in the stomach and small intestine is relatively low, with approximately 70 % of CGA being metabolized by colonic microorganisms before it enters the bloodstream. In this study, we successfully developed CGA-LMP (Low-methoxy-pectin) conjugates to improve the absorption rate of CGA. C57BL/6J mice were fed high-fat diets (HFD) supplemented with CGA, LMP, or CGA-LMP conjugates for a duration of eight weeks. The results demonstrated that the CGA, LMP, or CGA-LMP conjugates prevented HFD-induced hyperlipidemia, inflammation, liver steatosis, and adipocyte hypertrophy in obese mice. Notably, the CGA-LMP conjugates demonstrated superior efficacy in alleviating obesity compared to CGA or LMP alone. Further studies revealed that the primary mechanism of weight loss was the activation of the AMPK signaling pathway, which facilitates lipolysis and lipid β-oxidation. These findings highlight that the enhanced the anti-obesity effectiveness of CGA-LMP conjugates, expanding their potential applications in the field of functional nutrition and foods.

Complex influence of structural characteristics of low-methoxyl pectins on rheological properties of semi-solid Ca-gels

The semi-solid Ca-gels were prepared from low-methoxyl pectins (methoxylation degree DM 4-36 %) of Oberna behen, Potamogeton natans, Tanacetum vulgare, Comarum palustre, Bergenia crassifolia, and Heracleum sosnowskyi. Pectins are characterized by Mw of 77-556 kDa and different content of HG and RG-I. The gels were prepared by addition of Ca2+ ions at varying stoichiometric ratios, R = 2 × [Ca2+]/[COO-], of 0.2-0.6, and a fixed pectin concentration of 10 g/L. It was shown that the presence of certain sets of structural characteristics in low-methoxyl pectins from different sources leads to the formation of gels with similar rheological properties. Pectins with Mw 77-98 kDa, DM 6-14 % form stiffer Ca-gels than pectins with Mw 218-253 kDa, DM 24-36 % at the same R. Pectins with Mw 346-556 kDa form the strongest Ca-gels. Their high Mw compensates for the influence of DM on the properties of Ca-gels. The stability of gels in PBS (pH 7.4) is determined mainly by proportion of 1,4-linked non-methoxylated GalA in pectins. Pectins with DM 4-14 % form more stable Ca-gels in PBS than pectins with DM 21-36 %.

Pectins Rich in RG-I Extracted from Watermelon Peel: Physicochemical, Structural, Emulsifying, and Antioxidant Properties

RG-I pectin has excellent health benefits, but its raw materials are relatively scarce, and its complex structure often breaks down its side-chain structure during the extraction process. In this study, the physicochemical and antioxidant properties of a branched-chain-rich pectin gained from watermelon peel were demonstrated, and the structure-function relationships of RG-I-enriched pectin and emulsification properties were investigated. Fourier transform infrared spectroscopy, high-performance anion exchange chromatography, high-performance gel permeation chromatography, nuclear magnetic resonance spectroscopy, and methylation analyses reveal it as acetylated, low-methoxylated pectin, rich in RG-I side chains (MW: 1991 kDa, RG-I = 66.17%, methylation degree: 41.45%, (Ara + Gal)/Rha: 20.59%). RPWP outperforms commercial citrus pectin in emulsification and stability, significantly preventing lipid oxidation in emulsions. It also exhibits free radical scavenging abilities, contributing to its effectiveness in preventing lipid oxidation. Emulsions made with RPWP show higher viscosity and form a weak gel network (G' > G″), enhancing stability by preventing phase separation. These findings position watermelon peel as a good source of RG-I pectin and deepen our understanding of RPWP behavior in emulsion systems, which may be useful in the food and pharmaceutical fields.

Structural and rheological properties of diluted alkali soluble pectin from apple and carrot

Pectin, a complex polysaccharide found in plant cell walls, plays a crucial role in various industries due to its functional properties. The diluted alkali-soluble pectin (DASP) fractions that result from the stepwise extraction of apples and carrots were studied to evaluate their structural and rheological properties. Homogalacturonan and rhamnogalacturonan I, in different proportions, were the main pectin domains that composed DASP from both materials. Atomic force microscopy revealed that the molecules of apple DASP were longer and more branched. A persistence length greater than 40 nm indicated that the pectin molecules deposited on mica behaved as stiff molecules. The weight-averaged molar mass was similar for both samples. Intrinsic viscosity values of 194.91 mL·g-1 and 186.79 mL·g-1 were obtained for apple and carrot DASP, respectively. Rheological measurements showed greater structural strength for apple-extracted pectin, whereas carrot pectin was characterized by a higher linear viscoelasticity limit. This comparison showed that the pectin fractions extracted by diluted alkali are structurally different and have different rheological properties depending on their botanical origin. The acquired insights can enhance the customized use of pectin residue and support further investigations in industries relying on pectin applications.

Unveiling the impact of high-pressure processing on anthocyanin-protein/polysaccharide interactions: A comprehensive review

Anthocyanins, natural plant pigments responsible for the vibrant hues in fruits, vegetables, and flowers, boast antioxidant properties with potential human health benefits. However, their susceptibility to degradation under conditions such as heat, light, and pH fluctuations necessitates strategies to safeguard their stability. Recent investigations have focused on exploring the interactions between anthocyanins and biomacromolecules, specifically proteins and polysaccharides, with the aim of enhancing their resilience. Notably, proteins like soy protein isolate and whey protein, alongside polysaccharides such as pectin, starch, and chitosan, have exhibited promising affinities with anthocyanins, thereby enhancing their stability and functional attributes. High-pressure processing (HPP), emerging as a non-thermal technology, has garnered attention for its potential to modulate these interactions. The application of high pressure can impact the structural features and stability of anthocyanin-protein/polysaccharide complexes, thereby altering their functionalities. However, caution must be exercised, as excessively high pressures may yield adverse effects. Consequently, while HPP holds promise in upholding anthocyanin stability, further exploration is warranted to elucidate its efficacy across diverse anthocyanin variants, macromolecular partners, pressure regimes, and their effects within real food matrices.

Structural characterization and prebiotic activity of rhamnogalacturonan-I rich pumpkin pectic polysaccharide extracted by alkaline solution

The present study aimed to investigate the structural and physicochemical characteristics of alkali-extracted pectic polysaccharide (AkPP) and to evaluate its prebiotic effects. AkPP was obtained from pumpkin pulp using an alkaline extraction method. AkPP, which had a molecular weight (Mw) of mainly 13.67 kDa and an esterification degree of 9.60%, was composed mainly of galacturonic acid (GalA), rhamnose (Rha), galactose, and arabinose. The ratio of the homogalacturonan (HG) region to the rhamnogalacturonan-I (RG-I) region in AkPP was 48.74:43.62. In the nuclear magnetic resonance spectrum, the signals indicating α-1,4-linked D-GalA, α-1,2-linked L-Rha, α-1,2,4-linked L-Rha residues were well resolved, demonstrating the presence of the HG and RG-I regions in its molecular structure. Collectively, AkPP was low methoxyl pectin rich in the RG-I region with short side chains and had a low Mw. Thermal analysis revealed that AkPP had good thermal stability. Compared to inulin, AkPP more effectively promoted the proliferation of Lactobacillus acidophilus, Lacticaseibacillus rhamnosus GG, Lacticaseibacillus casei, and Lacticaseibacillus paracasei and the production of lactic, acetic, and propionic acids. This study presents the unique structural features of AkPP and provides a scientific basis for further investigation of the potential of AkPP as a promising prebiotic.

Extensive Analysis of Mulberry (Morus rubra L.) Polysaccharides with Different Maturities by Using Two-Step Extraction and LC/QqQ-MS

A primary challenge of polysaccharide analysis is the need for comprehensive extraction and characterization methods. In this study, mulberry polysaccharides at different maturities were fully extracted through a two-step process involving ethylenediaminetetraacetic acid (EDTA) and sodium hydroxide (NaOH), and their structures were determined by a combination analysis of monosaccharides and glycosidic linkages based on liquid chromatography triple quadrupole mass spectrometry (LC/QqQ-MS). The results indicate mulberry polysaccharides mainly contain highly branched pectic polysaccharides, (1,3,6)-linked glucan, xylan, and xyloglucan, but the content of different portions varies at different maturity stages. HG decreases from 19.12 and 19.14% (green mulberry) to 9.80 and 6.08% (red mulberry) but increases to 17.83 and 11.83% as mulberry transitioned from red to black. In contrast, the contents of glucan showed opposite trends. When mulberry turns red to black, the RG-I arabinan chains decrease from 47.75 and 28.86% to 13.16 and 12.72%, while the galactan side chains increase from 1.18 and 1.91 to 8.3 and 6.49%, xylan and xyloglucan show an increase in content. Overall, the two-step extraction combined with LC/QqQ-MS provides a new strategy for extensive analysis of complex plant polysaccharides.

Comparison on emulsifying and emulgelling properties of low methoxyl pectin with varied degree of methoxylation from different de-esterification methods

Low methoxyl pectin (LMP) with different degree of methoxylation (DM, 40-50 %, 20-30 % and 5-10 %) were prepared from commercially available citrus pectin using high hydrostatic pressure assisted enzymatic (HHP-pectin) and traditional alkaline (A-pectin) de-esterification method. The results showed that both de-esterification methods and DM exhibited LMPs with varied physicochemical, structural, and functional properties. As the DM decreased, LMP showed a decrease in molecular weight (Mw), while an increase in negative charges and rhamnogalacturonan I (RG-I) ratio, accompanied with better emulsion stability, emulsion gel strength and water-holding properties. Relative to A-pectin, HHP-pectin had higher Mw and lower RG-I side chain ratio, contributing to its better thermal stability, apparent viscosity, and emulgelling properties. HHP-pectin with lower DM (5-10 %) showed superior thickening, emulsifying and emulgelling properties, while that with higher DM (40-45 %) had superior thermal stability, which provided alternative for de-esterification and targeted structural modification of pectin.

Characterization and emulsifying ability evaluation of whey protein-pectin conjugates formed by glycosylation

Glycosylation is a method that enhances the functional properties of proteins by covalently attaching sugars to them. This study aimed at preparing three conjugates (WP-HG, WP-SBP, and WP-RGI) by dry heating method to research the influence of different pectin structures on the functional properties of WP and characterize properties and structures of these conjugates. The research results manifested that the degree of glycosylation (DG) of HG, SBP and RGI were 13.13 % ± 0.07 %, 23.27 % ± 0.3 % and 36.39 % ± 0.3 % respectively, suggesting that the increase of the number of branch chains promoted the glycosylation reaction. The formation of the conjugate was identified by the FT-IR spectroscopy technique. And SEM showed that WP could covalently bind to pectin, resulting in a smoother and denser surface of the conjugates. The circular dichroism analysis exhibited that the glycosylation reaction altered the secondary structure of WP and decreased the α-Helix content. This structural change in the protein spatial conformation led to a decrease in the hydrophobicity of protein surface. But the addition of pectin further regulated the hydrophilic-hydrophobic ratio on the surface of the protein, thus improving the emulsification properties of WP. In addition, the glycosylation could improve the stability of the emulsion, giving it a smaller droplet size, higher Zeta-potential and more stable properties. In a word, this study pointed out the direction for the application of different pectin structures in the development of functional properties of glycosylation products in food ingredients.

Development and characterization of films from Campomanesia xanthocarpa and commercial citrus pectins with different degrees of methyl-esterification

In this study, pectins from commercial citrus and isolated from gabiroba (Campomanesia xanthocarpa) fruits, were obtained with different degrees of methyl-esterification (DM) and applied in the films. The DM ranged from 0 % to 62.5 % and the gradual de-esterification process was confirmed by mono-dimensional analysis (1H NMR). In order to investigate the influence of DM values in pectin film properties, PCP (DM: 62.5 %); PCP-5 (DM: 37.4 %); PCP-15 (DM: 19.1 %), and a fully de-esterified sample PCP-35 (DM: 0 %) were selected. The functional properties of the films clearly showed that the DM and cross-linking process are necessary to obtain a material with water resistance. Furthermore, pectin isolated from the fruits of gabiroba was purified (GW-Na, DM: 51.9 %) and partially de-esterified (GW-Na-5, DM: 37.1 %). These pectins were used, for the first time, in development of films and the physical and mechanical properties were compared with films made with PCP and PCP-5 samples. GW-Na and GW-Na-5 films presented suitable properties, with reduced solubility reduced (57.1 and 26.2 %), high degree of swelling (2.14 and 2.26), low flexibility (18.05 and 6.11 MPa), respectively. High strength and rigidity (99.36 and 1040.9 MPa), for both films (GW-Na and GW-Na-5) were demonstrated, similar to that obtained by analyzed citrus pectin.

Influence of pectin domains and protein on the viscosity and gelation properties of alkali-extracted pectin from green tea residue

Alkaline pectin extract (APE) from green tea residues has lower viscosity and gelation properties than commercial citrus pectin. To improve the viscosity and gelation properties of APE, four treatments, namely degradation of homogalacturonan (HG) or rhamnogalacturonan (RG) I domains, esterification, and protein removal and degradation, were applied. With proper degradation of the HG or RG I domains (arabinan or galactan), the viscosity of APE increased from 12 to 2.5×104 or 5.0×103 mPa·s, respectively, and the numbers further increased by approximately 500 times with the addition of Ca2+. Other treatments had slight effects on APE viscosity. The strongest gel (G' = 6.7 × 103 Pa and G″ = 930 Pa) was made using the polygalacturonase treated APE with Ca2+ addition. Degradation of the HG domain or protein enhanced APE's self-crosslink effect, while all methods except protein degradation improved the calcium bridging effect, potentially improving the market potential of pectin from biowaste.

Gelling properties of lysine-amidated citrus pectins: The key role of pH in both amidation and gelation

The amidation of pectin by amino acids has been widely applied due to its safety and excellent gelling properties. This study systematically examined the effects of pH on the gelling properties of lysine-amidated pectin during amidation and gelation. Pectin was amidated over the range of pH 4-10, and the amidated pectin obtained at pH 10 showed the highest degree of amidation (DA, 27.0 %) due to the de-esterification, electrostatic attraction, and the stretching state of pectin. Moreover, it also exhibited the best gelling properties due to its greater numbers of calcium-binding regions (carboxyl groups) and hydrogen bond donors (amide groups). During gelation, the gel strength of CP (Lys 10) at pH 3-10 first increased and then decreased, with the highest gel strength at pH 8, which was due to the deprotonation of carboxyl groups, protonation of amino groups, and β-elimination. These results show that pH plays a key role in both amidation and gelation, with distinct mechanisms, and would provide a basis for the preparation of amidated pectins with excellent gelling properties. This will facilitate their application in the food industry.

Insights into the Acid-Induced Gelation of Original Pectin from Potato Cell Walls by Gluconic Acid-δ-Lactone

The acid-induced gelation of pectin in potato cell walls has been gradually recognized to be related to the improvement in the cell wall integrity after heat processing. The aim of this study was to characterize the acid-induced gelation of original pectin from a potato cell wall (OPP). Rheological analyses showed a typical solution-sol-gel transition process of OPP with different additions of gluconic acid-δ-lactone (GDL). The gelation time (Gt) of OPP was significantly shortened from 7424 s to 2286 s. The complex viscosity (η*) of OPP gradually increased after 4000 s when the pH was lower than 3.13 and increased from 0.15 to a range of 0.20~6.3 Pa·s at 9000 s. The increase in shear rate caused a decrease in η, indicating that OPP belongs to a typical non-Newtonian fluid. Furthermore, a decrease in ζ-potential (from -21.5 mV to -11.3 mV) and an increase in particle size distribution (from a nano to micro scale) was observed in OPP after gelation, as well as a more complex (fractal dimension increased from 1.78 to 1.86) and compact (cores observed by cryo-SEM became smaller and denser) structure. The crystallinity of OPP also increased from 8.61% to 26.44%~38.11% with the addition of GDL. The above results call for an investigation of the role of acid-induced OPP gelation on potato cell walls after heat processing.

Pectin Hydrogels: Gel-Forming Behaviors, Mechanisms, and Food Applications

Pectin hydrogels have garnered significant attention in the food industry due to their remarkable versatility and promising properties. As a naturally occurring polysaccharide, pectin forms three-dimensional (3D) hydrophilic polymer networks, endowing these hydrogels with softness, flexibility, and biocompatibility. Their exceptional attributes surpass those of other biopolymer gels, exhibiting rapid gelation, higher melting points, and efficient carrier capabilities for flavoring and fat barriers. This review provides an overview of the current state of pectin gelling mechanisms and the classification of hydrogels, as well as their crosslinking types, as investigated through diverse research endeavors worldwide. The preparation of pectin hydrogels is categorized into specific gel types, including hydrogels, cryogels, aerogels, xerogels, and oleogels. Each preparation process is thoroughly discussed, shedding light on how it impacts the properties of pectin gels. Furthermore, the review delves into the various crosslinking methods used to form hydrogels, with a focus on physical, chemical, and interpenetrating polymer network (IPN) approaches. Understanding these crosslinking mechanisms is crucial to harnessing the full potential of pectin hydrogels for food-related applications. The review aims to provide valuable insights into the diverse applications of pectin hydrogels in the food industry, motivating further exploration to cater to consumer demands and advance food technology. By exploiting the unique properties of pectin hydrogels, food formulations can be enhanced with encapsulated bioactive substances, improved stability, and controlled release. Additionally, the exploration of different crosslinking methods expands the horizons of potential applications.

Study on the ice crystals growth under pectin gels with different crosslinking strengths by modulating the degree of amidation in HG domain

The ice crystal morphology formed under a series of amidated pectin gels with various crosslink strengths were investigated. The results showed that as the degree of amidation (DA) increased, pectin chains exhibited shorter homogalacturonan (HG) regions. Highly amidated pectin exhibited a faster gelation rate and a stronger gel micro-network via hydrogen bonds. Based on cryogenic scanning electron microscopy (cryo-SEM), smaller ice crystals were formed in frozen gel with low DA, suggesting that a weaker cross-linked gel micro-network was more effective at inhibiting crystallization. After sublimation, lyophilized gel scaffolds with high crosslink strength displayed less number of pores, high porosity, lower specific surface area, and greater mechanical strength. This study is expected to confirm that the microstructure and mechanical properties of freeze-dried pectin porous materials could be regulated by changing the crosslink strength of pectin chains, which is achieved by increasing the degree of amidation in the HG domains.

Structural characteristics and gel properties of pectin from citrus physiological premature fruit drop

This study is the first to extract and characterize pectin from citrus physiological premature fruit drop. The extraction yield of pectin reached 4.4 % by acid hydrolysis method. The degree of methoxy-esterification (DM) of citrus physiological premature fruit drop pectin (CPDP) was 15.27 %, indicating it was low-methoxylated pectin (LMP). The monosaccharide composition and molar mass test results showed CPDP was a highly branched macromolecular polysaccharide (β: 0.02, Mw: 2.006 × 10⁵ g/mol) with rich rhamnogalacturonan I domain (50.40 %) and long arabinose and galactose side chain (32.02 %). Based on the fact that CPDP is LMP, Ca²⁺ was used to induce CPDP to form gels. Textural and rheological tests showed that the gel strength and storage modulus of CPDP were higher than commercial citrus pectin (CP) used in this paper due to the lower DM and rich neutral sugar side chains of CPDP. Scanning electron microscope (SEM) results showed CPDP had stable gel network structure.

Preparation and physicochemical properties characterization of hesperetin-grafted pectin conjugate

Different ratios of hesperetin (HT) were successfully grafted onto pectin from basic water (PB) molecules via free radical-induced reaction. The structure of PB-HT conjugates was characterized by ultraviolet spectroscopy, infrared spectroscopy, X-ray diffraction and scanning electron microscopy. Results indicated that HT was successfully grafted onto pectin molecules, and PB-HT-0.5 showed the highest HT content (103.18 ± 2.76 mg/g). Thermogravimetric analysis indicated that HT crystals showed good thermal resistance and could improve the thermal stability of PB-HT conjugates. Additionally, PB-HT conjugates showed good cytocompatibility and blood compatibility. This study provides a novel and efficient method to synthesize hesperetin-grafted pectin conjugate, which showed potential application in the fields of functional foods in the future.

A critical review of RG-I pectin: sources, extraction methods, structure, and applications

In recent years, RG-I pectin isolated by low-temperature alkaline extraction methods has attracted the attention of a large number of researchers due to its huge health benefits. However, studies on other applications of RG-I pectin are still lacking. In this study, we summarized the sources (e.g. potato pulp, sugar beet pulp, okra, apple pomace, citrus peel, pumpkin, grapefruit, ginseng, etc.), extraction methods, fine structure and applications of RG-I pectin in physiological activities (e.g. anti-cancer, anti-inflammatory, anti-obesity, anti-oxidation, immune regulation, prebiotics, etc.), emulsions, gels, etc. These neutral sugar side chains not only endow RG-I pectin with various physiological activities but the entanglement and cross-linking of these side chains also endow RG-I pectin with excellent emulsifying and gelling properties. We believe that this review can not only provide a comprehensive reading for new workers interested in RG-I pectin, but also provide a valuable reference for future research directions of RG-I pectin.

Gelation behaviors and mechanism of a new pectic polysaccharide from apple pomace as a potential gelatin substitute

In this study, we reported a pectic polysaccharide industrially obtained from apple pomace by metal ion precipitation technique showing an unexpected gelation behavior. Structurally, this apple pectin (AP) is a macromolecular polymer with a weight-average molecular weight (Mw) of 361.7 kDa, and DM (degree of methoxylation) of 12.5 %, comprising 60.38 % glucose, 19.41 % mannose, 17.60 % galactose and 1.00 % rhamnose and 1.61 % glucuronic acid. The low acidic sugar percentage relative to the total monosaccharide amount indicated a high branching structure of AP. On addition of Ca²⁺ ions, AP exhibited a remarkable gelling ability upon cooling its heat solution to low temperature (e.g., 4 °C). However, at room temperature (e.g., 25 °C) or in the absence of Ca²⁺, no gel was formed. At a fixed pectin concentration (0.5 %, w/v), AP showed increasing gel hardness and gelation temperature (T_gel) with CaCl₂ concentration increasing to 0.05 % (w/v); however, further addition of CaCl₂ weakened AP gels and even abolished the gelation. On reheating, all gels melted below 35 °C, which suggests the potential use of AP as a gelatin substitute. The gelation mechanism was explained as an intricate balance of the synchronous formation of hydrogen bond and Ca²⁺ crosslinks between AP molecules during cooling.

Effect of Hogweed Pectin on Rheological, Mechanical, and Sensory Properties of Apple Pectin Hydrogel

This study aims to develop hydrogels from apple pectin (AP) and hogweed pectin (HP) in multiple ratios (4:0; 3:1; 2:2; 1:3; and 0:4) using ionotropic gelling with calcium gluconate. Rheological and textural analyses, electromyography, a sensory analysis, and the digestibility of the hydrogels were determined. Increasing the HP content in the mixed hydrogel increased its strength. The Young’s modulus and tangent after flow point values were higher for mixed hydrogels than for pure AP and HP hydrogels, suggesting a synergistic effect. The HP hydrogel increased the chewing duration, number of chews, and masticatory muscle activity. Pectin hydrogels received the same likeness scores and differed only in regard to perceived hardness and brittleness. The galacturonic acid was found predominantly in the incubation medium after the digestion of the pure AP hydrogel in simulated intestinal (SIF) and colonic (SCF) fluids. Galacturonic acid was slightly released from HP-containing hydrogels during chewing and treatment with simulated gastric fluid (SGF) and SIF, as well as in significant amounts during SCF treatment. Thus, new food hydrogels with new rheological, textural, and sensory properties can be obtained from a mixture of two low-methyl-esterified pectins (LMPs) with different structures.

Physicochemical and functional properties of RG-I enriched pectin extracted from thinned-young apples

The demand for obtaining pectin from new sources has been continuously increasing. The abundant but underutilized thinned-young apple is a potential source of pectin. In this study, an organic acid (i.e., citric acid) and two inorganic acids (i.e., hydrochloric acid and nitric acid) commonly used in commercial pectin production were applied to extract pectin from three varieties of thinned-young apples. The physicochemical and functional properties of the thinned-young apple pectin were comprehensively characterized. The highest pectin yield (8.88 %) was obtained from Fuji apple using citric acid extraction. All pectin was high methoxy pectin (HMP) and rich in RG-I regions (>56 %). The citric acid extracted pectin had the highest molecular weight (Mw) and lowest degree of esterification (DE) values, and exhibited great thermal stability and shear-thinning property. Furthermore, Fuji-apple pectin possessed significantly better emulsifying properties compared to pectin obtained from the other two varieties of apples. Thus, pectin extracted with citric acid from Fuji thinned-young apples has great potential to be applied in the food industry as a natural thickener and emulsifier.

The Preparation and Potential Bioactivities of Modified Pectins: A Review

Pectins are complex polysaccharides that are widely found in plant cells and have a variety of bioactivities. However, the high molecular weights (Mw) and complex structures of natural pectins mean that they are difficult for organisms to absorb and utilize, limiting their beneficial effects. The modification of pectins is considered to be an effective method for improving the structural characteristics and promoting the bioactivities of pectins, and even adding new bioactivities to natural pectins. This article reviews the modification methods, including chemical, physical, and enzymatic methods, for natural pectins from the perspective of their basic information, influencing factors, and product identification. Furthermore, the changes caused by modifications to the bioactivities of pectins are elucidated, including their anti-coagulant, anti-oxidant, anti-tumor, immunomodulatory, anti-inflammatory, hypoglycemic, and anti-bacterial activities and the ability to regulate the intestinal environment. Finally, suggestions and perspectives regarding the development of pectin modification are provided.

Structural diversity and physicochemical properties of polysaccharides isolated from pumpkin (Cucurbita moschata) by different methods

Natural polysaccharides were isolated and purified from Cucurbita moschata by hot water extraction and mild acid-base sequential extraction. Chemical and instrumental studies revealed that hot water-extracted and mild acid-extracted polysaccharides with molecular masses of 48 kDa and 85 kDa were both pectic polysaccharides with homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) domains, while mild acid-extracted polysaccharide was more dominated by branched RG-I with higher contents of galactose (10.59 %) and arabinose (8.08 %). Furthermore, mild acid-extracted polysaccharide exhibited better thickening and emulsifying properties, likely due to its larger molecular mass and higher branching degree. Mild base-extracted polysaccharide with a molecular mass of 18 kDa was a glucan-like polysaccharide. It showed the strongest thermostability and gel behavior among these pumpkin polysaccharides, likely attributed to its unique network structure stabilized by substantial intra/intermolecular hydrogen bonds. This study aimed to establish the structure-property relationships between these structurally diverse pumpkin polysaccharides from different extraction methods and provided theoretical foundations for their targeted application in foods.

Pectin Characteristics Affect Root Growth in Spinach under Salinity

In understanding the role of root cell wall mechanisms in plant tolerance to salinity, it is important to elucidate the changes in the pectin composition and physical properties of the cell wall. Two salt-sensitive (Helan 3 and Prius β) and one salt-tolerant (R7) spinach cultivars were used to investigate the pectin polysaccharides, the characteristics of pectin, including the degree of pectin methy-lesterification, the HG:RG-I ratio, neutral side chains (galactan/arabinangalactan), and elasticity and viscosity parameters in the root elongation zone under salinity. Root growth was inhibited by salinity, whereas the root diameter was thickened in all cultivars. Salinity significantly reduced cell wall extensibility in all cultivars, and increased cell wall viscosity in Helan 3 and R7 relative to Prius β. Pectin was significantly increased under salinity stress. Cell wall viscosity was affected by pectin due to the molar proportion of uronic acid and/or pectin characteristics (HG:RG-I ratio). The molar proportion of uronic acid in pectin was reduced in Helan 3 and R7 compared with Prius β. The length and degree of pectin methy-lesterification of neutral side chains were significantly decreased in the R7 cultivar, with no significant changes in the other two cultivars. Demethylation of pectin could alter root growth and boost salt tolerance in the R7 cultivar. In this study, it is shown that cell wall pectin played important roles in regulating the root growth of Spinacia oleracea L. under salinity stress.

Beneficial effects of high pressure processing on the interaction between RG-I pectin and cyanidin-3-glucoside

In the present study, the effects of high-pressure processing (HPP) on the binding capacity, structural properties, antioxidant capacity and stability of rhamngalacturonan I (RG-I) pectin and cyanidin-3-glucoside (C3G) were investigated. HPP was found to have a positive effect on the binding between the two molecules, and the binding rate was increased by 32.8% after treatment (500 MPa/15 min). The increase in the binding rate is mainly due to the influence of high pressure on noncovalent effects such as hydrogen bonding and hydrophobicity. The results indicate that high pressure can be used to maintain the antioxidant capacity of C3G and improve the stability of C3G. The C3G retention rate is increased by 34.0% and 38.3% after heat treatment and simulated digestion, respectively. The results indicate that HPP improved stability of the C3G-RG-I pectin complex through interaction between C3G and RG-I pectin.

Conformational Properties of Flaxseed Rhamnogalacturonan-I and Correlation between Primary Structure and Conformation

The pectic polysaccharides extracted from flaxseed (Linum usitatissiumum L.) mucilage and kernel were characterized as rhamnogalacturonan-I (RG-I). In this study, the conformational characteristics of RG-I fractions from flaxseed mucilage and kernel were investigated, using a Brookhaven multi-angle light scattering instrument (batch mode) and a high-performance size exclusion chromatography (HPSEC) system coupled with Viscotek tetra-detectors (flow mode). The M_w of flaxseed mucilage RG-I (FM-R) was 285 kDa, and the structure-sensitive parameter (ρ) value of FM-R was calculated as 1.3, suggesting that the FM-R molecule had a star-like conformation. The M_w of flaxseed kernel RG-I (FK-R) was 550 kDa, and the structure-sensitive parameter (ρ) values ranged from 0.90 to 1.21, suggesting a sphere to star-like conformation with relatively higher segment density. The correlation between the primary structure and conformation of RG-I was further discussed to better understand the structure–function relationship, which helps the scale-up applications of pectins in food, pharmaceutical, or cosmetic industries.

Structure and In Vitro Fermentation Characteristics of Polysaccharides Sequentially Extracted from Goji Berry (Lycium barbarum) Leaves

Herein, the chelating agent-soluble fraction (CA), sodium carbonate-soluble fraction (SC), and sodium hydroxide-soluble fraction (SH) were sequentially extracted from the cell wall of goji berry (Lycium barbarum) leaves. Furthermore, SC was purified with Q-Sepharose fast flow resin to obtain the neutral sugar fraction (SC-I) and acid sugar fraction (SC-II). Physicochemical properties of polysaccharides were characterized by high-performance anion-exchange chromatography with pulsed amperometry detection, size exclusion chromatography-multi-angle laser light scattering, Fourier transform infrared spectroscopy, nuclear magnetic resonance, and atomic force microscopy analysis. Additionally, the impact of polysaccharides on modulating human gut microbiota was investigated by in vitro fermentation. A high amount of galacturonic acid (GalA) in CA showed that it was an aggregation of linear homogalacturonan. SC was the main pectic polysaccharide fraction and rich in neutral sugars. SC-I was the neutral sugar fraction with an extremely high molecular weight (2.055 × 10⁶ Da), while SC-II was the acid sugar fraction with a low molecular weight (1.766 × 10⁵ Da). SH seemed like a mixture of pectin and hemicellulose. All the five polysaccharides significantly (P < 0.05) increased the abundance of Bacteroides, Bifidobacteria, and Lactobacilli. To the best of our knowledge, this is the first report on the structure and fermentation characteristics of goji berry leaf polysaccharides, which is meaningful to provide a structural basis for further bioactivity research.

Spray drying of non-chemically prepared nanofibrillated cellulose: Improving water redispersibility of the dried product

Despite increasing interest in using nanofibrillated cellulose (NFC) as food thickener and emulsifier, poor water redispersibility of dried NFC, which is form suitable for practical utilization, significantly limits such applications. Studies are lacking on preparation of dried NFC with superior redispersibility. The present study therefore proposed and examined strategies to improve water redispersibility of spray dried NFC via the use of selected co-carriers, i.e., gum Arabic with/without xanthan gum, carboxymethyl cellulose or pectin. Synergistic interactions between NFC and co-carriers, as confirmed by X-ray diffraction (XRD) patterns and Fourier transform infrared (FTIR) spectra, helped prevent NFC agglomeration during spray drying. All reconstituted spray-dried NFC/co-carriers suspensions exhibited shear-thinning and gel-like behaviors, thus supporting the use of such suspensions as thickener and emulsifier. Spray-dried NFC with 80% gum Arabic and 20% xanthan gum (SD-NFC/GA20XG) resulted in suspension with highest viscosity; the suspension also performed best at recovering viscous characteristics of NFC. Water thickened by SD-NFC/GA20XG had strongest shear-thinning behavior, indicating that SD-NFC/GA20XG suspension resulted in smoothest mouth feel and easiest swallowing. Such observations were supported by XRD patterns of SD-NFC/GA20XG, which suggested that its relative crystallinity was the lowest. Its FTIR spectra also showed the highest intensity of -OH bending and carbonyl bands, which are directly related to water adsorption capability of NFC. Use of reconstituted SD-NFC/GA20XG as emulsifier also resulted in highest stability for oil-in-water (O/W) Pickering emulsion during storage for up to 30 days.