Directional hedonic thresholds for sodium concentration in hamburger

Enhancing saltiness perception in bone broth: the additive effect of oil and optimization of sodium-reduction formula for consumer acceptability

BACKGROUND

Excessive NaCl intake in liquid and semi-solid food (e.g. soup, hot pot base, sauce) poses a high risk to human health, and reducing NaCl intake is a major concern for global health.

RESULTS

Using the generalized Labeled Magnitude Scale (gLMS) method, the study verified the possibility of sodium reduction through oil addition. The compromised acceptance threshold (CAT) and hedonic rejection threshold (HRT) were determined. The gLMS results showed that the saltiness intensity of samples containing 0.36% NaCl and 2.29% sunflower seed oil was significantly higher than that of samples containing only 0.36% NaCl (P < 0.05). CAT and HRT results indicated that by adding 3.59% sunflower oil, the NaCl content could be reduced to a minimum of 0.14% without causing sensory rejection in bone broth samples. The quantitative descriptive analysis method was used to determine the effects of NaCl and oil concentrations on the sensory attributes of bone broth samples. Furthermore, it was used to analyze the consumer acceptability drivers in combination with the hedonic scale to optimize the formulation of reduced-salt bone broth products. Notably, sample E (0.36% NaCl, 2.29% fat) not only had a significant salt reduction effect with a 20% decrease in NaCl, but also had improved overall acceptability.

CONCLUSION

This study provides theoretical guidance for designing salt-reduction cuisine within the catering and food industries, including bone broth and hot pot bases. © 2024 Society of Chemical Industry.

Sensory characterization, acceptance, and stability studies on low calories fruit jelly candies

The objective of this work was to characterize and evaluate the sensory acceptance and stability of jelly candies with flavor of orange (OJC) or raspberry (RJC), and alternative sweeteners (isomalt, maltitol syrup, and stevia). A qualitative sensory study showed that among potential buyers (70% of 200 participants), the main associations were related to taste, sensations/feelings, health, and appearance. A sensory panel (80 participants) performed the rating of liking, and the sensory intensity assays, which showed that both candies were rated within liking categories by more than 70% of consumers, and that the taste attributes were categorized at the right point. Color and gumminess were rated in the just point for RJC, while for OJC, these variables deviated from the expected. Regarding sensory stability, a penalty study advised that bitterness/sweetness ratio, and color attributes should be improved in order to extend the candies´ sensory shelf life. Additionally, a trained sensory panel evaluated the textural changes during storage of the jelly candies. The sensory studies carried out on the novel jelly candies showed substantial interest from consumers, therefore, they could be considered an alternative to replace traditional sweets, offering a nutritional contribution from fruits, without artificial preservatives and added free sugars.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05747-7.

Determination of hedonic thresholds by varying three stimuli

The Hedonic Threshold Methodology (HTM), through the determination of compromised acceptance threshold (CAT) and hedonic rejection threshold (HRT), has several applications by the food industry. In order to further increase the field of application of HTM, the objective was to use a mixture design in the Hedonic Threshold Methodology, to enable the determination of hedonic thresholds (CAT and HRT) by varying the intensity of three stimuli simultaneously. It was investigated how much it is possible to replace the NaCl content (1.8% flour weight basis) with two other ingredients (KCL/yeast extract or KCL/enzyme preparation), without compromising the acceptance (CAT) and without resulting in sensory rejection (HRT) of crackers. Reduction in the acceptance started to occur by reducing the NaCl content by around 64% (from 1.81% to 0.651%), with the addition of 1.149% KCl. Two combinations of KCl and yeast extract (1.783% and 0.017%, or 0.693% and 1.107%, respectively) allowed producing a cracker with no NaCl without sensory rejection. The reduction in acceptance also started to occur by reducing the NaCl content by around 40% (from 1.81% to 1.086%), with adding of 0.358% KCl and 0.356% enzyme preparation. A sensory rejection begins to occur by reducing the NaCl content by around 99% (1.81-0.012%), with the addition of 1.215% KCl and 0.573% enzyme preparation (transglutaminase). The use of the mixture design in HTM allowed the unprecedented determination of hedonic thresholds varying three stimuli. This expands the possibilities for applications of sensory thresholds.

How much can sodium chloride be substituted for potassium chloride without affecting the sensory acceptance of cracker-type biscuits?

Excessive sodium consumption is a worldwide public health concern. The substitution of sodium chloride (NaCl) for potassium chloride (KCl) has been adopted to reduce the sodium concentration in processed foods. The challenge is to make this substitution without affecting the sensory acceptance of foods. In this context, the objective was to determine from which concentrations the replacement of NaCl by KCl results in reduced acceptance (compromised acceptance threshold - CAT) and begins the sensory rejection (hedonic rejection threshold - HRT) of cracker-type biscuits. Using the hedonic thresholds methodology (HTM) by varying a stimulus, CAT and HRT were determined for the concentration of NaCl in crackers and, by varying two stimuli, CAT and HRT, for replacing NaCl with KCl in crackers were determined. Without the addition of KCl, the reduction in acceptance started to occur by reducing the NaCl content by around 60% (from 1.81% to 0.73%); and sensory rejection began to appear by reducing the NaCl content by approximately 93% (1.81% to 0.13%). Reduction in the acceptance started to occur by lowering the NaCl content by around 78% (from 1.81% to 0.397%), with the addition of 0.896% KCl. In addition, by adding KCl, it was possible to reduce 100% NaCl without sensory rejection of the crackers. With these results, cracker industries can reduce the sodium content of their products, contributing to the reduction of population salt intake.

Stability of SARS-CoV-2 as consequence of heating and microwave processing in meat products and bread

The new severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that was first found in 2019 in Wuhan, China, caused coronavirus disease 2019 (COVID-19). It then spread worldwide rapidly, causing the 2019-2020 coronavirus pandemic. To date, it has been indicated that various transmission ways might be participated in outbreaks of COVID-19. Among these, food products, whether raw or processed, might be carriers for SARS-CoV-2. Therefore, this study was aimed to evaluate the effect of cooking and microwave process of meat products and bread on the stability of SARS-CoV-2. In this regard, sausages and hamburger as meat products and toast bread were inoculated with a viral load of 5.70 log fifty percent tissue culture infective dose (TCID50)/mL in order to create a simulated cross-contamination condition. The results showed that frying of hamburger at 225ºC for about either 6 or 10 min resulted in complete inactivation of SARS-CoV-2. Furthermore, a 5-log decrease in SARS-CoV-2 load was observed in sausages as a consequence of cooking process at 78ºC for either 20 or 30 min. Additionally, the effect of microwave oven at power of 630 watt on stability of SARS-CoV-2 showed that exposing toast bread for either 30 s or 1 min in this power led to a 5-log decrease in SARS-CoV-2 load in the toast bread.

Food products as potential carriers of SARS-CoV-2

At present, humanity is confronting with a novel life-threatening challenge from the COVID-19 pandemic infectious disease caused by the novel coronavirus SARS-CoV-2. To date, the various transmission modes of SARS-CoV-2 have not been completely determined. Food products might be carriers for SARS-CoV-2. The COVID-19 pandemic not only can spread through the respiratory tract like SARS and MERS but also the presence of the SARS-CoV-2 RNA in feces of several patients, shows the possibility of their fecal-oral route spread. Besides, people with gastric problems, including gastric intestinal metaplasia and atrophic gastritis, may be susceptible to this kind of COVID-19 infection. Accordingly, food may act as a potential vehicle of SARS-CoV-2 due to whether carry-through or carry-over contaminations. Considering carry-over, SARS-CoV-2 spread from personnel to food products or food surfaces is feasible. Beyond that, some shreds of evidence showed that pigs and rabbits can be infected by SARS-CoV-2. Thus, viral transmission through meat products may be conceivable, indicating carry-through contamination. As the spread rate of SARS-CoV-2 is high and its stability in different environments, especially food processing surfaces, is also remarkable, it may enter foods in whether industrialized processing or the traditional one. Therefore, established precautious acts is suggested to be applied in food processing units. The present review elucidates the risk of various staple food products, including meat and meat products, dairy products, bread, fruits, vegetables, and ready-to-eat foods as potential carriers for transmission of SARS-CoV-2.

Exploring New and Modified Rejection-Type Thresholds Using Cricket Snack Crackers

Recently, sensory threshold concepts have been expanded to include affective perceptions of foods and beverages, especially measures of product rejection; however, each threshold interpretation depends largely on the methodology employed. By substituting cricket powder for whole-wheat flour in snack crackers (0%, 5%, 10%, 15%, and 20%), we proposed modifications to two existing threshold methodologies: a modified consumer rejection threshold (M-CRT) using a 2-alternative choice (2-AC) preference test with "no preference" option; and a modified hedonic rejection threshold (M-HRT) based on less-than-neutral hedonic scores according to a one-sample t-test. We also proposed two new concepts: a rejection tolerance threshold (RTT) and an associated rejection range (RR), based on a binomial acceptability question and a probit regression model. These new methods provide more realistic interpretations of rejection-type thresholds based on user-defined allowable rejection levels, or "rejection tolerance" (for RTT), and a model-derived stimulus range (RR) to capture the rejection level of interest while providing flexibility for product formulation. All thresholds were investigated separately for color, flavor, texture and overall perception, elucidating differential sensorial effects of our novel ingredient on the food matrix. We suggest that conducting all demonstrated techniques in a single testing session gives a more expansive view of rejection thresholds while requiring minimal additional resources.