Reducing the sodium content without modifying the quality of beef burgers by adding micronized salt

Exploring Pijuayo (Bactris gasipaes) Pulp and Peel Flours as Fat Replacers in Burgers: A Multivariate Study on Physicochemical and Sensory Traits

Meat products are known for their lipid profile rich in saturated fats and cholesterol, and also for the formation of oxidation compounds; therefore, a reduction in animal fat may result in a product less harmful to health. Pijuayo is an Amazon fruit known for its nutritional properties, such as its fiber and lipid content. For these reasons, it is an attractive fruit to replace animal fat in meat products. The present work used pijuayo pulp and peel flours to partially replace animal fat in beef-based burgers at 25% and 50% levels, considering sensory and physicochemical outcomes evaluated by Principal Component Analysis (PCA), Correspondence Analysis (CA) and Multiple Factor Analysis (MFA). Pijuayo flour affected the physicochemical characteristics evaluated by PCA, where the samples with greater fat replacement were characterized by a high carbohydrate content and instrumental yellowness. The minimal fat replacement did not abruptly affect the PCA's instrumental texture and color, proximal composition, yield properties, and lipid oxidation. The overall liking was greater in the 25% fat reduction treatments, even greater than the control, in which positive sensory attributes for liking were highlighted for those treatments. A small segment of consumers (11% of total consumers) preferred the treatment with greater replacement of fat with pijuayo peel flour, which these consumers tended to characterize as seasoned. However, this treatment had the lowest liking. The MFA showed that the sensory characteristics tender and tasty were strongly correlated with overall liking and were highlighted in the samples of 25% fat reduction, suggesting that the pijuayo improves the tenderness and flavor of reduced-fat burgers. Other inclusion levels between 25% and 50% of fat replacement could be explored, and optimization studies are needed. In addition, the sensory characteristics and flavor-enhancing compounds of the fruit, as well as the nutritional aspects of the inclusion of pijuayo, should be studied, such as the fatty acid profile. These characteristics will be informative to explore pijuayo as a fat replacer at a pilot scale and industrial scale.

Impact of Micronized Salt in Reducing the Sodium Content in Fresh Sausages

This study aimed to investigate the incorporation of micronized salt (MS) to reduce sodium content in fresh sausages while preserving technological, chemical, textural, and sensory characteristics. Four treatments were prepared: control (C) with 2.0% regular salt; M2.0% with 2.0% micronized salt; M1.5% with 1.5% micronized salt; and M1.0% with 1.0% micronized salt, containing 1004, 1133, 860, and 525 mg of sodium/100 g of product, respectively. To characterize the samples, analyses of sodium content, cooking loss, relative myoglobin content, and instrumental color were carried out. The sensory analysis was performed using the Temporal-Check-All-That-Apply (TCATA) method. Half of the micronized salt treatment was mixed with the fat during the processing of the fresh sausages. It was possible to achieve a 50% reduction in sodium (M1.0%) in the fresh sausages without negative effects on most technological, chemical, and textural parameters, which did not differ from the control treatment (C). Conversely, "chewiness" decreased in M2.0% compared to the control (C) due to mixing micronized salt with the fat. The sodium reduction did not impact the temporal sensory profile and overall liking. Therefore, using micronized salt in fresh sausages reduces sodium content without affecting sensory traits and product stability.

Comprehensive Effects of Potassium Lactate, Calcium Ascorbate and Magnesium Chloride as Alternative Salts on Physicochemical Properties, Sensory Characteristics and Volatile Compounds in Low-Sodium Marinated Beef

The search for alternative salt formulations similar to sodium chloride and their effect on marinated meat products is of great significance to the low-sodium meat processing industry. The main purpose of this study was to investigate the effect of partially replacing sodium chloride with potassium lactate, calcium ascorbate, and magnesium chloride on the sodium content, water activity and distribution, protein solubility, microstructure, sensory characteristics and volatile flavor compounds in low-sodium marinated beef. The sodium content in the test group decreased up to 28% compared to 100% in the sodium chloride group C1. The formulation including 60% sodium chloride and a total of 40% compound alternative salts in groups F1 and F2 increased their myofibril fragmentation index and promoted the disruption of the myogenic fiber structure. Group F1 (the ratio of potassium lactate, calcium ascorbate and magnesium chloride was 2:1:1) performed higher solubility of myofibrillar proteins and lower transverse relaxation value than group F2 detected by low-field nuclear magnetic resonance, which indicated that F1 formulation was beneficial to promote the solubility of myofibrillar proteins and attenuate the water mobility of marinated beef. Moreover, group F1 had a more similar microstructure and more similar overall sensory attributes to group C1 according to the scanning electron microscopy. The sensory evaluation showed higher peak intensity and response values of volatile flavor compounds than group C1 and C2 (only 60% sodium chloride) when detected using gas chromatography-ion mobility spectrometry technology, which indicated that the compound alternative salts of group F1 can improve the lower quality of low-sodium marinated beef and perform similar attributes to the C1 sample regarding moisture distribution and microstructure and even performs better than it with regards to flavor. Therefore, the F1 formula possessed greater potential for application in low-sodium marinated meat products.

Novel NaCl reduction technologies for dry-cured meat products and their mechanisms: A comprehensive review

Sodium chloride (NaCl) confers a unique flavor and quality in meat products, however, due to growing concerns about the adverse effects of excessive NaCl consumption, how to reduce NaCl content while ensuring quality and safety has become a research hotspot in this field. This review mainly discusses the role of NaCl in dry-cured meat, as well as novel salt-reducing substances that can substitute for the effects of NaCl to achieve sodium reduction objectives. New technologies, such as vacuum curing, ultrahigh pressure curing, ultrasonic curing, pulsed electric field curing, and gamma irradiation, to facilitate the development of low-sodium products are also introduced. The majority of current salt reduction technologies function to enhance salt diffusion and decrease curing time, resulting in a decrease in NaCl content. Notably, future studies should focus on implementing multiple strategies to compensate for the deficiencies in flavor and safety caused by NaCl reduction.

Comparison of Pivot Profile (PP), Rate-All-That-Apply (RATA), and Pivot-CATA for the sensory profiling of commercial Chinese tea products

Rapid sensory profiling methods relying on consumers' perceptions are getting prevalent and broadly utilized by labs and companies to supersede conventional sensory profiling methodologies. Till now, various intensity-based sensory methods such as the newly proposed Pivot-Check-All-That-Apply (CATA) are limitedly developed and compared. In this investigation, Pivot Profile (PP), Rate-All-That-Apply (RATA), and Pivot-CATA methods were applied and validated using tea consumers and commercial Chinese tea products as samples. Data from three approaches were collected, analyzed by correspondence analysis (CA), and used to compare the three methods assessing the panel assessment process, sensory maps, confidence ellipses, and practical applications. Pivot-CATA exhibited a high similarity with RATA (RV = 0.873), and a lower similarity with PP (RV = 0.629). Of the three intensity-related methods, confidence ellipses on the RATA sensory map were the smallest and overlapped the least. However, Pivot-CATA consumed less time in collecting data and its questionnaire was more friendly to participants compared with PP and made the difference in intensity of samples more noticeable to the participants than RATA due to the existence of the pivot sample. Its experimental versatility also allows for a wide range of applications, indicating that the Pivot-CATA is an approach with great promise for routine use.

Assessment of Chemical, Physico-Chemical and Sensory Properties of Low-Sodium Beef Burgers Formulated with Flours from Different Mushroom Types

It is now widely demonstrated that excessive salt consumption can cause various health problems, and meat products are among the foods most consumed with a high salt content. For that, the aim of this work was to assess the effects of the utilization of flours obtained from oyster mushrooms (Pleurotus ostreatus), button mushrooms (Agaricus bisporus), and portobello mushrooms (Agaricus brunnescen) as salt replacers on chemical, physicochemical, and sensory properties of beef burgers. The fat and protein content was not affected by the inclusion of mushroom flour, while the sodium content was reduced by 55-61% compared to the control sample. The control sample had the lowest values for cooking loss and shrinkage (12.29 and 18.69%, respectively) whilst the reformulated samples had higher values ranging between 16.08 and 18.88% for cooking loss, respectively, and between 19.55 and 28.25% for shrinkage, respectively. The reformulated samples showed higher lipid oxidation values (ranging from 0.18 and 0.20 mg malondialdehyde/kg sample) than the control sample. Sensorially, all parameters analyzed were not affected by the replacement of sodium chloride by the different mushroom flours. The use of flours obtained from different mushroom flours is a viable alternative to be used as sodium chloride replacers in the preparation of beef burgers.

Sodium reduction in foods: Challenges and strategies for technical solutions

In many parts of the world, sodium consumption is higher than recommended levels, representing one of the most important food-related health challenges and leading to considerable economical costs for society. Therefore, there is a need to find technical solutions for sodium reduction that can be implemented by food producers and within food services. The aims of this review are to discuss the barriers related to sodium reduction and to highlight a variety of technical solutions. The barriers relate to consumer perception, microbiology, processing, and physicochemistry. Existing technical solutions include inhomogeneous salt distribution, coated salt particles, changing particle sizes and forms, surface coating, multisensory combinations, sodium replacements, double emulsions, adapted serum release by microstructure design, and adapted brittleness by microstructure design. These solutions, their implementation and the associated challenges, and applicable product categories are described. Some of these solutions are ready for use or are in their early development stages. Many solutions are promising, but in most cases, some form of adaptation or optimization is needed before application in specific products, and care must always be taken to ensure food safety. For instance, further research and innovation are required in the dynamic evolution of saltiness perception, consumer acceptance, the binding and migration of sodium, juiciness, microbiological safety, and the timing of salt addition during processing. Once implemented, these solutions will undoubtedly support food producers and food services in reducing sodium content and extend the application of the solutions to different foods.

Mechanism of polyhydroxy alcohol-mediated curing on moisture migration of minced pork tenderloin: On the basis of molecular docking

•

Polyhydroxy alcohols affect salt diffusion and moisture migration.

•

Polyhydroxy alcohols cause the water to migrate out to reduce aw in meat.

•

Polyhydroxy alcohols retard salt diffusion into the meat by forming a viscose barrier.

•

Polyhydroxy alcohols can prevent meat structural damage by binding to myosin.

This study investigated the mechanism of glycerol, xylitol, and sorbitol-mediated curing of cured minced pork tenderloin. The use of polyhydroxy alcohol during mediated curing significantly reduced the salt content (p < 0.01) and water activity (aw) of the cured pork tenderloin. Low-field nuclear magnetic resonance (LFNMR) revealed that 1 % glycerol, 1 % xylitol, 1 % sorbitol, and 10 % glycerol-mediated curing decreased water mobility, and improved water holding capacity (WHC), and produced uniform dense microstructures. Raman spectroscopy and molecular docking indicated that polyhydroxy alcohols formed hydrogen bonds with myosin, as well as hydrogen bonds with free water molecules to convert free water into bound water to reduce aw, and altered the hydrophobic environment of myosin surface to reduce structural damage caused by high salt content. In conclusion, using polyhydroxy alcohol to mediate curing can effectively reduce the salt content of cured meat and provide a theoretical basis for its application in the cured meat industry.

Reduction of sodium chloride: a review

Sodium chloride (NaCl) is an enjoyable condiment. However, evidence is accumulating to indicate that an excessive intake of Na⁺ in food may lead to an increased risk of cardiovascular and cerebrovascular diseases. Previous systematic reviews have focused on replacing NaCl with other metal salts (e.g. KCl). However, new salty flavor enhancers (yeast extract, taste peptides, and odor compounds) have yet to be reviewed. This systematic review evaluates the methods for, and feasibility, of NaCl reduction. It defines NaCl reduction and considers the methods used for this purpose, especially the use of flavor enhancers (yeast extract, taste peptides, and odor compounds). © 2022 Society of Chemical Industry.

Strategies to improve meat-like properties of meat analogs meeting consumers' expectations

Due to environmental and ethical concerns, meat analogs represent an emerging trend to replace traditional animal meat. However, meat analogs lacking specific sensory properties (flavor, texture, color) would directly affect consumers' acceptance and purchasing behavior. In this review, we discussed the typical sensory characteristics of animal meat products from texture, flavor, color aspects, and sensory perception during oral processing. The related strategies were detailed to improve meat-like sensory properties for meat analogs. However, the upscaling productions of meat analogs still face many challenges (e.g.: sensory stability of plant-based meat, 3D scaffolds in cultured meat, etc.). Producing safe, low cost and sustainable meat analogs would be a hot topic in food science in the next decades. To realize these promising outcomes, reliable robust devices with automatic processing should also be considered. This review aims at providing the latest progress to improve the sensory properties of meat analogs and meet consumers' requirements.

Heterocyclic aromatic amine contents and quality characteristics of bacon as influenced by NaCl concentration of brine

Bacon usually have a high salt content. Excessive intake of salt could cause a harm to human health. Heterocyclic aromatic amines (HAAs) are carcinogenic and mutagenic heterocyclic compounds formed by the reactions of precursor substances at high temperature. This study investigated the influence of different levels of NaCl on the HAA contents and quality characteristics of bacon. Moisture, a_w , L* value, b* value, thiobarbituric acid-reactive substance (TBARS), and carbonyl content increased significantly with a decrease in the NaCl concentration of the brine (p < 0.05). There were no significant differences between treatments for a* value, pH, creatine content, sensory redness, bitterness, or off-odor (p > 0.05). Sensory evaluation showed that saltiness in bacon increased significantly with increased NaCl concentrations in brine. The increased NaCl concentrations decreased the total HAAs in fried bacon (p < 0.05). Moreover, the nonpolar HAA contents in bacon were higher than the polar HAA contents; salt concentration mainly affected the nonpolar HAA content. In summary, salt content had a significant influence on the HAA content and the quality characteristic of bacon.

Sugar reduction methods and their application in confections: a review

Many American adults consume almost double the daily recommended amount of sugar. With excess consumption of sugar and consequential health problems arising, food manufacturers are investigating methods to reduce sugar while maintaining similar functional and sensory properties. The body of literature was searched for papers regarding sugar reduction, and the main methods of sugar reduction are summarized herein with a specific focus on high sugar products. Reducing sugar in confections is possible; however, the challenge is maintaining the balance between texture and sweetness perception. Texture plays a large role in the sweetness perception of confections, with firmer products often being perceived as less sweet. Depending on the method, 20-40% of sugar can be removed from confections without sacrificing sensory acceptance, often replaced with multiple ingredients. Further investigation is needed on confection models and how the emerging health trends set the foundation for sugar reduction.

Compendium of sodium reduction strategies in foods: A scoping review

In response to health concerns generated by increased sodium intake, many new approaches have been studied to reduce the sodium content in processed food. It has been suggested that reducing sodium in the food supply may be the most appropriate solution. The aim of this scoping review was to establish what sodium reduction strategies are effective in maintaining acceptable sensory qualities for various food industry applications. Studies that evaluate and report on the effectiveness of a sodium reduction strategy relevant to food and included outcomes detailing how the strategies were received by human subjects using sensory data are included, as well as book chapters, literature reviews, and patents focusing on sodium reduction strategies. Only those published in English and since 1970 were included. Literature was obtained through Scopus, PubMed, EBSCOhost, and ScienceDirect databases, whereas patents were obtained through US Patent Trademark Office, Google Patents, and PATENTSCOPE databases. Two-hundred and seventy-seven primary studies, 27 literature reviews, 10 book chapters, and 143 patents were selected for inclusion. Data extracted included details such as analytical methods, broad and specific treatment categories, significant outcomes, and limitations among other material. Sodium reduction methods were categorized as either salt removal, salt replacement, flavor modification, functional modification, or physical modification. Although salt removal and salt replacement were the majority of included studies, future research would benefit from combining methods from other categories while investigating the impact on sensory characteristics, technological aspects, and consumer perception of the strategy.

Use of Healthy Emulsion Hydrogels to Improve the Quality of Pork Burgers

The present research evaluated the use of oil mixture emulsion hydrogels as animal fat replacers and their effect on the physicochemical, nutritional and sensory characteristics of pork burgers. Three different types of burgers were manufactured: control (samples elaborated with 100% pork fat), T1 and T2 (pork fat totally replaced by emulsion hydrogels of walnut or pistachio oil and algal oil, respectively). Fat replacement increased the moisture and ash contents and colour parameters (L* and b*) of pork burgers. Modified samples turned out to be firmer and chewier than those in the control group. The addition of oil emulsion hydrogels caused a significant decrease in fat and energy contents and the products obtained can be considered "reduced fat content". Moreover, the content of saturated fatty acids decreased, while mono- and polyunsaturated fatty acids increased, constituting an improvement in health indices. Sensory differences were found between the samples and T2 was the most preferred for flavour and overall. However, both modified burgers had good levels of acceptability. To conclude, the use of the proposed oil mixture emulsion hydrogels as pork backfat substitutes represents a promising strategy to obtain healthier pork burgers without negatively affecting technological or sensory properties.

Recent advances in the development of healthier meat products

Meat products are an excellent source of high biological value proteins, in addition to the high content of minerals, vitamins, and bioactive compounds. However, meat products contain compounds that can cause a variety of adverse health effects and pose a serious health threat to humans. In this sense, this chapter will address recent strategies to assist in the development of healthier meat products. The main advances about the reduction of sodium and animal fat in meat products will be presented. In addition, strategies to make the lipid profile of meat products more nutritionally advantageous for human health will also be discussed. Finally, the reduction of substances of safety concern in meat products will be addressed, including phosphates, nitrites, polycyclic aromatic hydrocarbons, heterocyclic aromatic amines, as well as products from lipid and protein oxidation.

Effect of Salt Content Reduction on Food Processing Technology

Higher salt intake is associated with the risk of cardiovascular and kidney diseases, hypertension and gastric cancer. Salt intake reduction represents an effective way to improve people’s health, either by the right choice of food or by a reduction of added salt. Salt substitutes are often used and also herb homogenates are treated by high pressure technology. Salt reduction significantly influences the shelf life, texture, pH, taste, and aroma of cheese. The composition of emulsifying salts or starter cultures must be modified to enact changes in microbial diversity, protease activity and the ripening process. The texture becomes softer and aroma atypical. In bakery products, a salt reduction of only 20–30% is acceptable. Water absorption, dough development, length and intensity of kneading and stability of dough are changed. Gluten development and its viscoelastic properties are affected. The salt reduction promotes yeast growth and CO₂ production. Specific volume and crust colour intensity decreased, and the crumb porosity changed. In meat products, salt provides flavour, texture, and shelf life, and water activity increases. In this case, myofibrillar proteins’ solubility, water binding activity and colour intensity changes were found. The composition of curing nitrite salt mixtures and starter cultures must be modified.

Original burger (traditional) or burger with mushroom addition? A social representation approach to novel foods

Currently, consumers' interest in healthy products has attracted the attention of academia and the meat industry, which has focused mainly on incorporating ingredients with healthier properties. In this context, the aim of this study was to investigate the social representation of original burgers and burgers with mushroom addition considering different sexes and body mass indexes (BMIs) of individuals. Thus, 209 Brazilians answered a word association task followed by a word classification based on their importance and valence for original burgers and burgers with the addition of mushrooms. To obtain the structure of social representation, the words were positioned into four distinct zones based on their frequency of elicitation and importance. Also, the polarity index was used to give a connotation to the words. Three groups of consumers were identified. The first group (consumers with class-1 obesity of both sexes) associated the original burger with positive categories (cheese, juicy, seasoned, food, tasty, joy, salad and delicious). The second one (female consumers with pre-obesity and class-1 obesity) associated the burger with the addition of mushrooms with the elements price, different, vegetarian, flavor, gourmet and healthy. Finally, the third group (men and women for both stimuli and with a wide range of BMI) characterized burgers with sensory attributes, feelings and moments of consumption. In conclusion, the social representation of the original burger and the burger with the addition of mushrooms differed among consumers, suggesting that the main associations can be the main motivations for the consumption of a certain product.

Enrichment of NaCl-reduced burger with long-chain polyunsaturated fatty acids: Effects on physicochemical, technological, nutritional, and sensory characteristics

This study aimed to determine the effect of NaCl reduction and addition of long-chain polyunsaturated fatty acids (PUFA) on the quality traits of burgers. Fish oil was either directly incorporated or added as encapsulated by freeze-dried microparticles (complex coacervates) composed of soy protein isolate and inulin. Despite the differences in some parameters associated with NaCl reduction (e.g., instrumental hardness), the quality of the burgers was mainly affected by the microparticles. Thus, a decrease in pH and increase in hardness and chewiness were observed, and a higher exposure of fish oil to oxidation was observed thus increasing volatile oxidation compounds and negatively impacting on the sensory profile and overall liking of the burgers. However, the encapsulation of the fish oil helped to retain EPA and DHA after cooking. The results of the NaCl-reduced burger with unencapsulated fish oil suggest the possibility of incorporating PUFAs, but only containing EPA after cooking.

Sodium chloride reduction in fresh sausages using salt encapsulated in carnauba wax

Carnauba wax was used in salt encapsulation, allowing sodium reduction in fresh sausages while maintaining the salty taste due to the inhomogeneous salt distribution. Four treatments were made, as follows: treatment C containing 2% non-encapsulated salt, and the treatments S_2.0%, S_1.5%, and S_1.0% containing 2, 1.5, and 1% encapsulated salt, respectively. The physicochemical parameters were within the standard regulations for all treatments, with the lower hardness and cohesiveness observed for S_1.0%. The treatments and the storage period (90 days) had no effect on a_w and instrumental color. Although a decrease in pH and an increase in lipid oxidation were observed during storage, the results were within acceptable levels. Concerning the consumers' perception of saltiness, the assessors reported no differences among the treatments C, S_2.0%, and S_1.5%. Thus, it is possible to reduce 25% salt in fresh sausages using the taste contrast technology.

Performance of reduced fat-reduced salt fermented sausage with added microcrystalline cellulose, resistant starch and oat fiber using the simplex design

The search for ingredients that improve technological and nutritional aspects of food has been intensified in recent years by both researchers and industry. Thus, the aim of this study was to evaluate fermented sausages with simultaneous reduction of fat (25%) and salt (25% KCl; 75% NaCl) using up to 2% of three different dietary fiber: microcrystalline cellulose (MCC), resistant starch (RS) and oat fiber (OF). Technological and sensory evaluations used the simplex-centroid mixture design. The dietary fiber added did not affect the weight loss, pH values and sensory acceptance. Models were obtained for water activity, lactic acid bacteria, hardness, chewiness and TBARS values. When included in combination the three dietary fiber helped reduce water activity, inclusion of MCC increased the population of lactic acid bacteria, and inclusion of OF with MCC demonstrated an antioxidant effect and improved hardness and chewiness. These dietary fibers are ingredients that can contribute to the development of reduced fat - reduced salt fermented sausage.

Modification of NaCl structure as a sodium reduction strategy in meat products: An overview

Sodium chloride (NaCl) is an indispensable ingredient in meat products, but the consumption of high doses of sodium contained in their formulations may bring about negative health implications. The replacement of NaCl by other salts in meat products has been a technological challenge. Accordingly, this review highlights the importance of NaCl over other sodium and non‑sodium salts in the saltiness perception and proposes the use of reduced-size and shapes of NaCl to maximize saltiness perception, while using less NaCl dosages in meat products. However, the effect of matrix components (water, proteins and fats) on the final salty taste is of special consideration. To counteract the effect of the matrix components, two main routes of incorporation of different NaCl types in meat products are discussed: encapsulation and protection of NaCl by the hydrophobic component of the meat product. Given the limited number of publications using this potential strategy, more studies on the application of these technological strategies are required.

Low-sodium dry-cured rabbit leg: A novel meat product with healthier properties

Dry-cured rabbit legs were produced with a 50% reduction or replacement of NaCl by KCl and with the addition of monosodium glutamate (MG). The effect of this reformulation on technological, nutritional, and sensory characteristics was evaluated. The sodium reformulation did not show a great impact on Aw, pH, weight loss, and volatile profile of the samples. The samples presented high protein (31.5 to 36.1%) and low fat contents (3.2 to 5.7%). In addition, all essential amino acids presented an amino acid score greater than 1.0. The reformulated samples showed a sodium reduction of 46.2% while the addition of KCl to the formulations provided a healthy Na/K ratio. Oleic acid was the major fatty acid (FA) (31.3% of total FA) and healthy lipid indexes were observed for all samples. Finally, the addition of MG was effective to compensate for the sensory defects caused by sodium reformulation.

The effect of glucosamine and glucosamine caramel on quality and consumer acceptability of regular and reduced salt breakfast sausages

Given the more recent interest in its flavour enhancing potential, the effects of the addition of glucosamine or glucosamine caramel on both technological and consumer acceptability of regular and reduced salt breakfast sausages were studied. A 2 × 3 complete factorial design was used with salt level (regular salt, RS (1.1%) and low salt, LS (0.825%)) and formulation treatment (control, GlcN - glucosamine (1%), CAR - glucosamine caramel (1% GlcN equivalent)) as main effects. Raw or cooked sausages were analyzed for CIE L*, a* and b*, physical and textural properties and consumer acceptance. Different salt levels did not affect the pH of meat batter, while the reduced salt treatment resulted in higher cook loss. On the contrary, addition of GlcN and CAR reduced the pH of sausage with no effect on cook loss. Neither salt levels nor treatment formulation affected the textural attributes of sausages. The inclusion of CAR significantly reduced L* value and increased redness (a*) and yellowness (b*) of cooked sausages. Salt reduction resulted in decreased a* and b* values in raw batter; the effect which disappeared in cooked sausages. Glucosamine caramel increased the overall and flavour acceptability score of low salt breakfast sausages. The present study showed that glucosamine caramel could potentially improve the flavour of low salt breakfast sausage with limited effect on textural attributes.

Storage of beef burgers containing fructooligosaccharides as fat replacer and potassium chloride as replacing sodium chloride

There was few studies using the simultaneous reduction of fat and sodium chloride, as well as the stability of the meat products with these reductions. This study aimed to evaluate the effects of fat and sodium chloride reduction in beef burgers during storage. For this, two treatments were produced: T1-without fat and sodium chloride reduction (control) and T2-with 50% fat reduction + 5% fructooligosaccharides and with the replacement of 50% of sodium chloride by potassium chloride. Physicochemical analysis and sensory acceptance were performed. According to results, the pH increased (p < 0.05) with 120 days. For the lipid oxidation, there was an interaction between treatments and storage. There was an increase in TBARS with storage for both treatments. T2 had the highest TBARS at 0, 30, and 60 days. For the color before cooking, there was a reduction in the redness (p < 0.05) with 90 days. After cooking, the lightness reduced at 90 days, while the redness increased at 90 days. However, the instrumental changes were not perceived by consumers. For the sensory acceptance, there was a reduction in the flavor, texture and overall liking with storage. However, despite the decline, the averages remained in the acceptance zone. The beef burgers were perceived as less juiciness and less salty after storage. Thus, the storage affects the physicochemical characteristics and sensory evaluation of beef burgers low-fat and low-sodium. The results reinforce the need for more studies with the storage of meat products with fat and sodium chloride reduced.

Looking at non-sensory factors underlying consumers' perception of smoked bacon

Smoked bacon is a food consumed everywhere and previous work has focused on the sensory properties and acceptability of the product. However, little attention has been given to the non-sensory factors that drive sensory and hedonic perception of this product. In this context, the aim of this work was to study the influence of non-sensory factors on consumer behavior towards smoked bacon, using projective mapping coupled with conjoint analysis. Eight visual stimuli were created using a full factorial design with three factors (convenience, healthiness, and context of consumption), at two levels each. Ninety-five consumers positioned the stimuli in a two-dimensional space considering their similarities and differences, and then, rated their expected liking and purchase intention. According to the projective mapping, consumers based the representation of the stimuli on the three factors under study, but conjoint analysis indicated that healthiness was the most important factor, followed by the context of consumption and convenience. The findings of this study may help in the selection of future strategies in the process of food development, in order to launch products with greater chance of success in the market.

Use of Tiger Nut (Cyperus esculentus L.) Oil Emulsion as Animal Fat Replacement in Beef Burgers

The present study evaluated the replacement of beef fat in beef burgers using a tiger nut (Cyperus esculentus L.) oil emulsion, in order to reduce total fat and saturated fatty acids in the studied samples. Three formulations were processed: Control—100% beef fat; tiger nut 50% (TN50)—50% of beef fat replaced using tiger nut oil emulsion and tiger nut 100% (TN100)—100% of beef fat replaced by tiger nut oil emulsion. The physicochemical parameters were affected after fat replacement. Moreover, the protein and fat contents decreased in those sample with tiger nut oil emulsion, thus the formulation TN100 can be considered as “reduced fat content”. Regarding color, an increased L* and b* value parameters was observed after TN100 while the values of a* remained similar to the Control samples. The hardness, cohesiveness, gumminess and chewiness were similar in all formulations. The addition of tiger nut oil emulsion as a substitute for beef fat reduced saturated fat and increased the mono- and polyunsaturated fatty acids. Oleic acid was found to be in highest proportions in burgers. The TN100 samples were considered as acceptable by consumers. Therefore, total replacement of beef fat using tiger nut oil emulsions in beef burger resulted in a well-accepted and healthier meat product with reduced total and saturated fat contents, as well as increased unsaturated fatty acids.

Use of Agaricus bisporus mushroom in beef burgers: antioxidant, flavor enhancer and fat replacing potential

Abstract

This study aimed to evaluate the potential use of Agaricus bisporus mushroom as a natural antioxidant, fat/salt substitute and flavor enhancer in beef burger. Ten treatments were considered using a fractional factorial design (salt [0.5, 1.25 and 2.0%], fat [10, 15 and 20%] and mushroom content [0, 15 and 30%]). Treatments were characterized by instrumental and sensory measurements. The statistical design indicated that fat content had little influence on the results. The principal component analysis showed that the incorporation of mushrooms and salt modified the texture, moisture and water activity. Oxidative stability decreased as the salt content increased, at a low-fat content. Finally, the sensory profile was affected by the mushroom and salt contents, with the fat content exerting the least influence. Therefore, mushroom incorporation in beef burger may be a feasible strategy to reduce the fat content of beef burgers.

Graphical abstract

Hydrogelled emulsion from chia and linseed oils: A promising strategy to produce low-fat burgers with a healthier lipid profile

Burgers (20% pork back fat) were produced with the replacement of 0, 20, 40, 60, 80, and 100% of pork back fat by hydrogelled emulsion (HE) from chia and linseed oils. No changes (P > .05) were observed for the moisture retention, diameter reduction, and cooking loss of the treatments, with a significant increase in the lipid retention (P < .05). Hardness increased (P < .05) with increasing the lipid replacement level, and a significant color difference (ΔE) was detected between the treatments and the control. In addition to reducing animal fat, a healthier fatty acid profile was reached after the lipid reformulation of the burgers, thus allowing the burgers to be labeled with health claims. The sensory tests (acceptance and Check-All-That-Apply) indicated that it is possible to replace up to 60% of pork back fat by HE.