Properties of texturized protein and performance of different protein sources in the extrusion process: A review

Effect of vegetable oils on the thermal gel properties of PSE-like chicken breast meat protein isolate-based emulsion gels

To enhance the gel properties of PSE (pale, soft, and exudative)-like chicken meat protein isolate (PPI), the effect of peanut, corn, soybean, and sunflower oils on the gel properties of PPI emulsion gels was investigated. Vegetable oils improved emulsion stability and gel strength and enhanced viscosity and elasticity. The gel strength of the PPI-sunflower oil emulsion gel increased by 163.30 %. The thermal denaturation temperature and enthalpy values were increased. They decreased the particle size of PPI emulsion (P < 0.05) and changed the three-dimensional network structure of PPI emulsion gels from reticular to sheet with a smooth surface and pore-reduced lamellar. They elevated the content of immobile water PPI emulsion gels, decreased the α-helix and β-turn, and increased the β-sheet and random coil. Vegetable oil improved the gel properties of PPI in the following order: sunflower oil > soybean oil > corn oil ≈ peanut oil > control group.

Plant-based fascia tissues: Exploring materials and techniques for realistic simulation

The growing demand for sustainable and ethical food options has led to significant advancements in plant-based meat substitutes (PBMS). PBMS have made considerable progress in simulating the taste, texture, and sensory properties of animal meat. Connective tissue is a fundamental component of animal meat that significantly influences tenderness, texture, and sensory properties. However, the imitation of realistic connective tissues has received relatively less attention in the PBMS industry. The current work focuses on exploring materials and techniques for the replication of plant-based connective tissues (PBCT). By understanding the structural and functional characteristics of animal connective tissues (ACT), it is possible to replicate these characteristics in PBCT. Hydrogels, with their ability to simulate certain properties of ACT, present a viable material for the creation of PBCT. To achieve the desired simulation, their mechanical and structural properties need to be enhanced by using several materials and several physical techniques.

Investigation into the fabrication of plant-based simulant connective tissue utilizing algae polysaccharide-derived hydrogel

Connective tissue is an important component of meat products that provides support to animal muscles. Hydrogels are considered a promising alternative to connective tissues and simulate actual products by adjusting the gel texture and mouthfeel. This study used soybean protein isolate (SPI), corn starch (CS), konjac glucomannan (KGM), and seaweed powder (SP) as raw materials to examine the effect of different added SP and KGM concentrations on the gel texture. The G' of the gel increased five-fold when the SP and KGM concentration was increased from 1 % to 3 %. The results of mechanical property tests showed that with the addition of SP, the gel hardness increased from 316.00 g to 1827.23 g and the tensile strength increased from 0.027 MPa to 0.089 MPa. Sensory evaluation showed that the samples with 2 % SP and KGM presented the highest overall acceptability score and the most significant similarity to real connective tissue. The connective tissue simulants exhibited excellent water-holding capacity (>90 %), significantly increasing their juiciness. SEM indicated that 2 % KGM addition improved gel network structure stability. The results demonstrate the potential of seaweed polysaccharide-derived hydrogels as connective tissue mimics. This provides a new strategy for the preparation of high mechanical strength hydrogels and lays the foundation for structural diversification of plant-based meat.

Incorporation of germinated lupin into corn-based extrudates: Focus on starch digestibility, matrix structure and physicochemical properties

The research aimed to assess the effects of incorporating germinated Lupinus angustifolius flour into corn extrudates for different periods (3, 5, and 7 days), focusing on starch digestibility, morphological structure, thermal, and pasting properties. Extrudate with germinated lupinus flour for 7 days (EG7) significantly increased the content of slowly digestible starch up to 10.56% (p < 0.05). Crystallinity increased up to 20% in extrudates with germinated flour compared to extrudates with ungerminated flour (EUG), observing changes at the molecular level by FTIR that impact the thermal and pasting properties. X-ray diffraction revealed angles of 2θ = 11.31, 16.60, 19.91, and 33.04 as a result of the germination and extrusion processes. Microstructural analysis indicated starch-protein interactions influencing changes in calorimetry, viscosity, X-ray diffraction, and digestibility. PCA allowed establishing that the addition of germinated flours significantly affected the properties and microstructural characteristics of extruded products, potentially affecting digestibility and nutritional quality.

Use of phytic acid from rice bran combined with sodium erythorbate as antioxidants in chicken mortadella

The antioxidant effect of purified phytic acid (PPA) from rice bran (rice polishing by-product) combined with sodium erythorbate (SE) was evaluated for the first time in mortadella (added with 60% mechanically separated meat), a cured product with high-fat content and highly prone to oxidation, characteristic in Brazil. PPA proved effective compared to standard analytical grade phytic acid (SPA). Two central composite rotational designs (CCRD) (A and B) were employed to investigate the influence of PPA and SE, and SPA and SE, respectively, on mortadella lipid oxidation evaluated by TBARS after 30 days at 30 °C. Due to the high phytic acid's potent antioxidant capacity, the combination of PPA and SE synergistically reduced mortadella lipid oxidation. Furthermore, PPA from rice bran effectively controlled lipid oxidation in mortadella when combined with SE in the range of 5.0 to 9.0 mmol/kg of SPA and 25.0 to 50.0 mmol/kg of SE.

Green and efficient synthesis of cellulose nanocrystals from Hamelia patens leftover via hydrolysis of microwave assisted-ionic liquid (MWAIL) pretreated microcrystalline cellulose

The efficient bioconversion of the lignocellulosic agro-waste has immense importance in biorefinery processing in extracting the cellulose and saccharide fractions. To achieve this, a series of chemical pretreatments is employed, thus concerning environmental threats limit its use. Therefore, an ionic liquid is employed for pretreatment before sustainable extractions owing to its safe manipulation, recycling, and reusability. Specifically, microwave-assisted ionic liquid (MWAIL) pretreatment has significant importance in extracting high cellulose yield at less thermal power consumption. In this study, the leftover stalks of Hamelia patens were subjected to MWAIL pretreatment at 60, 70, 80, and 90 °C to extract microcrystalline cellulose (MCC). Subsequently, the MCC was fabricated into cellulose nanocrystals (CNC) through hydrolytic treatment using acidic and ionic liquids and denoted as CNC-AH and CNC-ILH. Thus obtained CNC was characterized by FTIR, FESEM, XRD, and TGA to investigate the influence of solvent on its morphology, crystallinity, and thermal stability of CNC. The results support that the CNC-ILH has comparatively more thermal and dispersal stability with a reduced crystallinity index than CNC-AH. The surprising results of CNC-ILH signify its utilization in diverse applications in the food and industrial sectors.

Nanoencapsulation of Oliveria decumbens Vent./basil essential oils into gum arabic/maltodextrin: Improved in vitro bioaccessibility and minced beef meat safety

This study investigated the functional properties of freeze-dried encapsulated Oliveria decumbens Vent. (OEO) and basil (BEO) essential oils (EOs) in maltodextrin/gum arabic coating solution (1:1). Nanoencapsulated EOs were evaluated in terms of size, polydispersity, encapsulation efficiency, morphology, antioxidant, and antibacterial activities (AOA and ABA), and sensory characteristics in vitro compared to the control. The TPC (30.43 to 32.41 mg GAE/g DW) and AOA (25.97 to 26.42 %) were determined in free and encapsulated OEO, and ABA was observed, which were higher than BEO. Both free and encapsulated OEO and BEO demonstrated significant ABA against various Gram-positive and Gram-negative bacteria, with MIC values ranging from 0.25 to 1.25 mg/mL and MBC values ranging from 1.00 to 3.00 mg/mL. In minced meat, both free and encapsulated oils effectively reduced bacterial counts during refrigerated storage, with log reductions ranging from 1.00 to 6.48 CFU/g. Additionally, the pH and thiobarbituric acid values in meat samples were better maintained with the addition of oils. Sensory analysis showed that the encapsulated oils effectively masked their natural flavor and aroma, making them suitable for incorporation into food. Finally, OEO and BEO nanocapsules can improve the standard and safety of meat products due to their antioxidant and antibacterial properties.

Salt ions improve soybean protein isolate/curdlan complex fat substitutes: Effect of molecular interactions on freeze-thaw stability

Although emulsion gels show significant potential as fat substitutes, they are vulnerable to degreasing, delamination, and other undesirable processes during freezing, storage, and thawing, leading to commercial value loss in terms of juiciness, flavor, and texture. This study investigated the gel strength and freeze-thaw stability of soybean protein isolate (SPI)/curdlan (CL) composite emulsion gels after adding sodium chloride (NaCl). Analysis revealed that adding low salt ion concentrations promoted the hardness and water-holding capacity (WHC) of fat substitutes, while high levels displayed an inhibitory effect. With 40 mM NaCl as the optimum concentration, the hardness increased from 259.33 g (0 mM) to 418.67 g, the WHC increased from 90.59 % to 93.18 %, exhibiting good freeze-thaw stability. Confocal laser scanning microscopy (CLSM) and particle size distribution were used to examine the impact of salt ion concentrations on protein particle aggregation and the damaging effect of freezing and thawing on the proteoglycan complex network structure. Fourier-transform infrared spectroscopy (FTIR) and protein solubility evaluation indicated that the composite gel network structure consisted of covalent contacts between the proteoglycan molecules and hydrogen bonds, playing a predominant role in non-covalent interaction. This study showed that the salt ion concentration in the emulsion gel affected its molecular interactions.

Optimizing the ultrasonic extraction of polyphenols from mango peel and investigating the characteristics, antioxidant activity and storage stability of extract nanocapsules in maltodextrin/whey protein isolate

In this study, the extraction and nanoencapsulation of mango peel extract (MPE) were investigated to enhance its stability and preserve its antioxidant properties. Initially, using the central composite design (CCD)-response surface methodology (RSM), optimal conditions for the extraction of MPE via an ultrasonic system were determined to be a temperature of 10.53 °C, a time of 34.35 min, and an ethanol concentration of 26.62 %. Subsequently, the extracted extract was spray-dried and nanoencapsulated using three types of coatings: maltodextrin, whey protein isolate (WPI), and their combination. The results showed that nanoencapsulation led to a significant improvement in the stability of phenolic compounds in the extract during storage compared to free extract. Furthermore, capsules prepared with the combined coating exhibited the highest levels of phenolic compounds and antioxidant activity. Therefore, it can be concluded that nanoencapsulation can serve as an effective method for preserving the bioactive properties of MPE.