Antioxidant polyethylene films based on a resveratrol containing Clay of Interest in Food Packaging Applications

Preparation and properties of edible active films of gelatin/carboxymethyl cellulose loaded with resveratrol

Resveratrol (Res) powder was incorporated into gelatin (GEL)/carboxymethyl cellulose (CMC) film-forming solutions to create GEL/CMC-Res composite films (G/C-R) without the use of organic solvents. The study focused on how phase separation affected the properties of these films. The film formation mechanism of the G/C-R films was analyzed using infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The findings revealed that the Res powder was evenly distributed within the GEL/CMC film matrix, which enhanced the crystallinity and surface roughness of the films, contributing to improved surface hydrophobicity. Dynamic rheological analysis showed that the presence of Res increased both the modulus and viscosity of the film-forming solutions. Thermal analysis, including differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA), indicated that Res elevated the phase transition temperature, decreased the rate of thermal degradation, and enhanced the thermal stability of the films. Additionally, Res reduced water vapor permeability (WVP) by 75 % and significantly boosted antioxidant activity from 15 % to 85 %. This study demonstrates that the dispersion of Res powder in G/C-R blend films markedly improves their water barrier and antioxidant properties, effectively inhibiting the oxidation of soybean oil, and highlighting their potential as active packaging for food.

Synthesis and Assessment of Novel Sustainable Antioxidants with Different Polymer Systems

Antioxidants are essential to the polymer industry. The addition of antioxidants delays oxidation and material degradation during their processing and usage. Sustainable phenolic acids such as 4-hydroxybenzoic acid or 3,4-dihydroxybenzoic acid were selected. They were chemically modified by esterification to obtain various durable molecules, which were tested and then compared to resveratrol, a biobased antioxidant, and Irganox 1076, a well-known and very efficient fossil-based antioxidant. Different sensitive matrices were used, such as a thermoplastic polyolefin (a blend of PP and PE) and a purposely synthesized thermoplastic polyurethane. Several formulations were then produced, with the different antioxidants in varying amounts. The potential of these different systems was analyzed using various techniques and processes. In addition to antioxidant efficiency, other parameters were also evaluated, such as the evolution of the sample color. Finally, an accelerated aging protocol was set up to evaluate variations in polymer properties and estimate the evolution of the potential of different antioxidants tested over time and with aging. In conclusion, these environmentally friendly antioxidants make it possible to obtain high-performance materials with an efficiency comparable to that of the conventional ones, with variations according to the type of matrix considered.

Characteristics, antimicrobial capacity, and antioxidant potential of electrospun zein/polyvinyl alcohol nanofibers containing thymoquinone and electrosprayed resveratrol nanoparticles

The aim of the present study was to fabricate, characterize, and evaluate the in vitro antimicrobial and antioxidant properties of zein/polyvinyl alcohol (ZN/PVA) nanofibers containing 2% and 4% of thymoquinone (TQ), either alone or in combination with electrosprayed ZN nanoparticles containing 1% and 2% of resveratrol (RS). According to scanning electron microscopy analysis, the diameter of nanofibers and nanoparticles increased with increasing TQ and RS concentrations, respectively. The molecular interaction between ZN or PVA polymers and TQ or RS was confirmed by Fourier transform infrared spectroscopy. Thermogravimetric analysis showed that the thermal stability of nanofibers did not change with the addition of TQ and RS. Moreover, incorporation of TQ in nanofibers along with RS nanoparticles increased their antibacterial and free radical scavenging activities based on broth dilution and DPPH methods, respectively (p ≤ .05). Escherichia coli O157:H7 (as a Gram-negative pathogenic bacteria) was more resistant to all treatments than Staphylococcus aureus (as a Gram-positive pathogenic bacteria). In addition, the combined use of TQ in nanofibers and RS nanoparticles had antagonistic antibacterial and synergistic antioxidant effects. The best results were obtained with ZN/PVA nanofiber containing 4% TQ and electrosprayed with 2% RS nanoparticles (p ≤ .05). According to the results of the present study, biodegradable ZN/PVA nanofiber containing TQ and electrosprayed with RS nanoparticles can be used as a novel active packaging material in the food industry.

Development of innovative antioxidant food packaging systems based on natural extracts from food industry waste and Moringa oleifera leaves

Active packaging that prolongs food shelf life, maintaining its quality and safety, is an increasing industrial demand, especially if integrated in a circular economy model. In this study, the fabrication and characterization of sustainable cellulose-based active packaging using food-industry waste and natural extracts as antioxidant agents was assessed. Grape marc, olive pomace and moringa leaf extracts obtained by supercritical fluid, antisolvent and maceration extraction in different solvents were compared for their antioxidant power and phenolic content. Grape and moringa macerates in acetone and methanol, as the most efficient and cost-effective extracts, were incorporated in the packaging as coatings or in-between layers. Both systems showed significant free-radical protection in vitro (antioxidant power 50%) and more than 50% prevention of ground beef lipid peroxidation over 16 days by indirect TBARS and direct in situ Raman microspectroscopy measurements. Therefore, these systems are promising for industrial applications and more sustainable farm-to-fork food production systems.

Resveratrol-based biorefinery models for favoring its inclusion along the market value-added chains: A critical review

Resveratrol, a natural organic polyhydroxyphenolic compound, has gained significant attention in the last years given its potential health benefits, including antioxidant, anti-cancer, and anti-inflammatory properties. It can be directly extracted from plants, vegetables, and related products and waste resources, but also chemically/enzymatically/microbially synthesized. However, certain process strategies have some limitations, such as high costs, reduced yield or high energy demand, thus implying significant environmental loads. In this context, the search for more sustainable and circular process schemes is key to the integration of resveratrol into the market value chain of the food, cosmetic and pharmaceutical sectors. The extraction of resveratrol has traditionally been based on conventional methods such as solvent extraction, but advanced green extraction techniques offer more efficient and environmentally friendly alternatives. This review analyses both conventional and green alternative extraction technologies, as well as its bioproduction through microbial fermentation, in terms of production capacity, yield, purity and sustainability. It also presents alternative biorefinery models based on resveratrol bioproduction using by-products and waste streams as resources, specifically considering wine residues, peanut shells and wood bark as input resources, and also following a circular approach. This critical review provides some insight into the opportunities that resveratrol offers for promoting sustainable development and circularity in the related market value chains, and thus provides some criteria for decision making for biorefinery models in which resveratrol is one of the targeted high value-added products. It also identifies the future challenges to promote the inclusion of resveratrol in value chains, with the scale-up of green technologies and its demonstrated economic feasibility being the most prominent.

Development and characterization of antioxidant bilayer film based on poly lactic acid-bitter vetch (Vicia ervilia) seed protein incorporated with Pistacia terebinthus extract for active food packaging

This study focuses on designing an active bilayer food package film based on polylactic acid (PLA) and bitter vetch seed protein incorporated with Pistacia terebinthus extract (PTE). The effect of PTE on the physicochemical, barrier, structural, mechanical, and antioxidant properties of the active film was determined. Moisture content, water solubility, and water vapor permeability (WVP) of the active films indicated that the addition of PTE increased its suitability for food packaging. FE-SEM micrographs illustrated that the resulting films had a smooth and dense surface, describing a continuous network of protein molecules within the film structure. FTIR analysis displayed the physical interaction between PTE and the film polymer. XRD revealed an increase in the crystallinity of the active films. The resulting active film had a low migration rate (<7%) of phenolic compounds into fatty food simulant. Notably, the addition of PTE significantly (P ≤ 0.05) decreased the tensile strength and Young's modulus (from 15.13 and 315.98 MPa to 14.07 and 254.07 MPa, respectively). Concurrently, there was an increase in the elongation at break of the active films (from 23.19 to 75.60%), indicating higher flexibility compared to control films. Additionally, the incorporation of PTE improved the thermal properties of active films. The antioxidant capacity of the designed films was measured based on their DPPH radical scavenging activity, revealing that the antioxidant capacity of the control film increased from 44.65% to 59.72% in the active film containing 15% PTE. In conclusion, the prepared bilayer film can effectively be used as an active food package for sensitive foods to oxidation.

Application of natural extracts as active ingredient in biopolymer based packaging systems

Active packaging systems come under novel techniques and are creating demands in food packaging aspects. They are specially designed for food products where shelf life is a key driving factor. Their wide range of functionality preserves the color, texture, smell, and taste of the food item retaining their freshness and edibility for longer than any other methods available on market. An active ingredient in packaging systems enables efficient consumable quality which resulted in reduced complaints from consumers. However, techniques must be inexpensive and environment-friendly. The use of biodegradable packaging systems reinforced by exploiting natural compounds forms the latest trend to attract consumer demand in substituting synthetic preservatives in foods that can protect against food spoilage. Natural extracts have gained commercial importance in active packaging nowadays for the delivery of safe and high-quality foods that are being employed in both fresh and processed produce. Development and use of innovative active packaging systems in varied forms are expected to increase in the future for food safety, quality, and stability. The review overviews the beneficial effects of plant acquired components in modulating product quality in packaged form for commercial aspects in the market.

Nano-chitin: Preparation strategies and food biopolymer film reinforcement and applications

Current trends in food packaging systems are toward biodegradable polymer materials, especially the food biopolymer films made from polysaccharides and proteins, but they are limited by mechanical strength and barrier properties. Nano-chitin has great economic value as a highly efficient functional and reinforcing material. The combination of nano-chitin and food biopolymers offers good opportunities to prepare biodegradable packaging films with enhanced physicochemical and functional properties. This review aims to give the latest advances in nano-chitin preparation strategies and its uses in food biopolymer film reinforcement and applications. The first part systematically introduces various preparation methods for nano-chitin, including chitin nanofibers (ChNFs) and chitin nanocrystals (ChNCs). The nano-chitin reinforced biodegradable films based on food biopolymers, such as polysaccharides and proteins, are described in the second part. The last part provides an overview of the current applications of nano-chitin reinforced food biopolymer films in the food industry.

Capability of Copper Hydroxy Nitrate (Cu2(OH)3NO3) as an Additive to Develop Antibacterial Polymer Contact Surfaces: Potential for Food Packaging Applications

The globalization of the market, as well as the increasing world population, which require a higher demand for food products, pose a great challenge to ensure food safety and prevent food loss and waste. In this sense, active materials with antibacterial properties are an important alternative in the prolongation of shelf life and ensuring food safety. In this work, the ability of copper(II) hydroxy nitrate (CuHS) to obtain antibacterial films based on low density polyethylene (LDPE) and polylactic acid (PLA), was evaluated. The thermal properties of the composites, evaluated using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), showed that the concentrations of added CuHS do not particularly change these characteristics with respect to the neat polymer matrix films. The mechanical properties, determined using dynamic mechanical analysis (DMTA), indicate a small increase in the brittleness of the material in PLA-based composites. The antibacterial properties against Listeria monocytogenes and Salmonella enterica were evaluated using a surface contact test, and a bacterial reduction of at least 8 to 9 logarithmic units for the composites with 0.3% CuHS, both in LDPE and PLA and against both bacteria, were achieved. The reusability of the composite films after their first use demonstrated a higher stability against Listeria monocytogenes. The migration and cytotoxicity of the composites loaded with 0.3% CuHS was evaluated, demonstrating the safety of these materials, which reinforces their potential use in food packaging applications.

Processing Stabilization of Polyethylene with Grape Peel Extract: Effect of Extraction Technology and Composition

Dry grape peel powder was extracted by three different techniques, stirred tank reactor, Soxhlet and ultrasound extraction. The composition, physical and chemical structure and inherent stability of the extracts were characterized by various methods. The extracts and reference compounds were added to polyethylene and their stabilization efficiency was determined in multiple extrusion experiments. The composition of the extracts was quite similar. Ten main compounds were identified in the extracts, which contained a considerable number of polyphenols, but only small amounts of quercetin and trans-resveratrol. The extracts proved to be more efficient processing stabilizers than trans-resveratrol and the commercial stabilizer, Irganox 1010, irrespective of the extraction technology used. In spite of their good processing stabilization effect, polymers containing the extracts had poor residual stability. The differences in processing and long-term stabilization must be related to the different structures of the polyphenols contained by the extracts and the reference compounds. The results clearly prove that the IC50 value determined by the DPPH assay is not suitable for the estimation of the efficiency of a compound as a stabilizer for polymers.

Phenolic Compounds in Active Packaging and Edible Films/Coatings: Natural Bioactive Molecules and Novel Packaging Ingredients

In recent years, changing lifestyles and food consumption patterns have driven demands for high-quality, ready-to-eat food products that are fresh, clean, minimally processed, and have extended shelf lives. This demand sparked research into the creation of novel tools and ingredients for modern packaging systems. The use of phenolic-compound-based active-packaging and edible films/coatings with antimicrobial and antioxidant activities is an innovative approach that has gained widespread attention worldwide. As phenolic compounds are natural bioactive molecules that are present in a wide range of foods, such as fruits, vegetables, herbs, oils, spices, tea, chocolate, and wine, as well as agricultural waste and industrial byproducts, their utilization in the development of packaging materials can lead to improvements in the oxidative status and antimicrobial properties of food products. This paper reviews recent trends in the use of phenolic compounds as potential ingredients in food packaging, particularly for the development of phenolic compounds-based active packaging and edible films. Moreover, the applications and modes-of-action of phenolic compounds as well as their advantages, limitations, and challenges are discussed to highlight their novelty and efficacy in enhancing the quality and shelf life of food products.

Opportunities and challenges of polyphenols and polysaccharides for type 1 diabetes intervention

Type 1 diabetes (T1D) is an autoimmune disorder characterized by the destruction of insulin-producing pancreatic β cell. It contributes to high mortality, frequent diabetic complications, poor quality of life in patients and also puts a significant economic burden on health care systems. Therefore, the development of new therapeutic strategies is urgently needed. Recently, certain dietary compounds with potential applications in food industry, particularly polyphenols and polysaccharides, have gained increasing attention with their prominent anti-diabetic effects on T1D by modulating β cell function, the gut microbiota and/or the immune system. In this review, we critically discuss the recent findings of several dietary polyphenols and polysaccharides with the potential to protect against T1D and the underlying anti-diabetic mechanisms. More importantly, we highlight the current trends, major issues, and future directions of industrial production of polyphenols- and polysaccharides-based functional foods for preventing or delaying T1D.

Analytical and Numerical Modeling of Degradation and Pyrolysis of Polyethylene: Measuring Aging with Thermogravimetry

Aging reactions due to heat and radiation cause chain scissions and cross-linking in cross-linked polyethylene (XLPE). We have developed theoretical and numerical graph models to study the evolution of the gel fraction and network properties during aging as well as the mass loss during thermogravimetric analysis (TGA). Our analytical and kinetic Monte Carlo (KMC) based models that combine degradation reactions and a simple vaporization model can quantitatively predict TGA curves for aged XLPE. Fitting the model to experimental TGA data yields the number of scission reactions, showing that thermogravimetry combined with our models can present a nondestructive aging characterization tool for lifetime prediction.

Performance of Thyme Oil@Na-Montmorillonite and Thyme Oil@Organo-Modified Montmorillonite Nanostructures on the Development of Melt-Extruded Poly-L-lactic Acid Antioxidant Active Packaging Films

Today, the use of natural biodegradable materials in the production processes is more and more adopted by industry to achieve cyclic economy targets and to improve environmental and human health indexes. Active packaging is the latest trend for food preservation. In this work, nanostructures were prepared by incorporation of thyme oil with natural natrium-montmorillonite and organo-montmorillonite with two different techniques, direct impregnation and the green evaporation–adsorption process. Such nanostructures were mixed with poly-L-lactic-acid for the first time via an extrusion molding process to develop a new packaging film. Comparisons of morphological, mechanical, and other basic properties for food packaging were carried out via XRD, FTIR, TG, SEM/EDS, oxygen and water vapor permeation, and antimicrobial and antioxidant activity for the first time. Results showed that poly-L-lactic-acid could be modified with clays and essential oils to produce improved active packaging films. The final product exhibits food odor prevention characteristics and shelf-life extension capabilities, and it could be used for active packaging. The films based on OrgMt clay seems to be more promising, while the thyme oil addition improves their behavior as active packaging. The PLLA/3%TO@OrgMt and PLLA/5%TO@OrgMt films were qualified between the tested samples as the most promising materials for this purpose.

Evaluation of antioxidant and antibacterial interactions between resveratrol and eugenol in carboxymethyl cellulose biodegradable film

The aim of present study was to compare the in vitro antioxidant and antibacterial properties of carboxymethyl cellulose (CMC) films containing resveratrol (RES) and eugenol (EUG), alone and in combination, and to calculate the dose interactions between them. At first, the total phenolic content of CMC films was evaluated. Then, their antioxidant and antibacterial effects of films were determined using DPPH, reducing power, disk diffusion, and broth dilution methods. Finally, concentrations of RES and EUG which showed better results in the CMC films were added in combination forms to calculate their antioxidant and antibacterial interactions. The results showed that addition of RES and/or EUG to CMC films increased the total phenolic content, free radicals scavenging activity, reducing power, and antibacterial activities of the films (p ≤ .05). Gram-positive bacteria were more susceptible than Gram-negatives. In addition, the combined use of RES and EUG in CMC films had synergistic antioxidant and antagonistic antibacterial effects. The best results belonged to the film containing RES (8 µg/ml) + EUG (8 mg/ml) (p ≤ .05). Considering the results of the present research, we can utilize CMC biodegradable film containing RES and EUG as a natural active packaging in food industry.

Nanoemulsion-based basil seed gum edible film containing resveratrol and clove essential oil: In vitro antioxidant properties and its effect on oxidative stability and sensory characteristic of camel meat during refrigeration storage

The initial purpose of this study was to compare the in vitro antioxidant interactions between resveratrol (RES) and clove essential oil (CEO) in conventional and nanoemulsion-based basil seed gum (BSG) films. Then, the effects of the best nanoemulsion-based BSG film obtained from in vitro evaluations were determined on oxidative stability and sensory properties of minced camel meat during 20-day storage at 4 °C. The results showed higher in vitro antioxidant activities of nanoemulsion-based BSG films compared to conventional films as well as synergistic effects between RES and CEO. Furthermore, minced camel meat wrapped with nanoemulsion-based BSG film containing RES 4 μg/mL + CEO 10 mg/mL showed better results compared with the control group with the following scores: total carbonyls (0.84 nmol/mg protein), peroxide value (4.03 meq/kg lipid), thiobarbituric acid reactive substance (1.03 mg malondialdehyde/kg), and sensory analysis (overall acceptability: 5.4). The finding of the present study can be applied as a new method in meat and meat products packaging industry.

Recent developments in antimicrobial and antifouling coatings to reduce or prevent contamination and cross-contamination of food contact surfaces by bacteria

Illness as the result of ingesting bacterially contaminated foodstuffs represents a significant annual loss of human quality of life and economic impact globally. Significant research investment has recently been made in developing new materials that can be used to construct food contacting tools and surfaces that might minimize the risk of cross-contamination of bacteria from one food item to another. This is done to mitigate the spread of bacterial contamination and resultant foodborne illness. Internet-based literature search tools such as Web of Science, Google Scholar, and Scopus were utilized to investigate publishing trends within the last 10 years related to the development of antimicrobial and antifouling surfaces with potential use in food processing applications. Technologies investigated were categorized into four major groups: antimicrobial agent-releasing coatings, contact-based antimicrobial coatings, superhydrophobic antifouling coatings, and repulsion-based antifouling coatings. The advantages for each group and technical challenges remaining before wide-scale implementation were compared. A diverse array of emerging antimicrobial and antifouling technologies were identified, designed to suit a wide range of food contact applications. Although each poses distinct and promising advantages, significant further research investment will likely be required to reliably produce effective materials economically and safely enough to equip large-scale operations such as farms, food processing facilities, and kitchens.

Potato peel extracts as an antimicrobial and potential antioxidant in active edible film

Potato peel is phenolic-rich plant byproduct that has multiple biological functions. The study explores the antimicrobial efficiency of the peel and its antioxidant potential incorporated with potato starch film. Antimicrobial sensitivity test using microdilution and diffusion test revealed positive response in Escherichia coli, Salmonella enterica, and Staphylococcus aureus with minimum inhibitory concentration, 7.5 ± 2, 5.8 ± 2, and 4.7 ± 1 mg/ml, respectively, but had a negative response for Klebsiella pneumoniae and Listeria monocytogenes. HPLC analysis revealed that caffeic, chlorogenic, and neochlorogenic acids are the main chemical compounds found in potato peel extract and responsible for its antimicrobial property. The scavenging ability and phenolic content in the active film range from 10 to 22 mg GAE/g of the dried film with 24%-55% of inhibition, respectively. The scanning electron microscope of the starch film showed homogeneously and ordered structure; however, some cracks and pores shown in the active film. The simulation experiment of phenols migration from the film into fatty and aqueous foods showed higher concentration in aqueous and less in the fatty foods. Therefore, potato peel extract has antibacterial as well as antioxidant property and incorporating with potato starch produce an active film which can be used as an alternative technology for active food packaging.

Development of Active Barrier Multilayer Films Based on Electrospun Antimicrobial Hot-Tack Food Waste Derived Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Cellulose Nanocrystal Interlayers

Active multilayer films based on polyhydroxyalkanoates (PHAs) with and without high barrier coatings of cellulose nanocrystals (CNCs) were herein successfully developed. To this end, an electrospun antimicrobial hot-tack layer made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from cheese whey, a by-product from the dairy industry, was deposited on a previously manufactured blown film of commercial food contact PHA-based resin. A hybrid combination of oregano essential oil (OEO) and zinc oxide nanoparticles (ZnONPs) were incorporated during the electrospinning process into the PHBV nanofibers at 2.5 and 2.25 wt%, respectively, in order to provide antimicrobial properties. A barrier CNC coating was also applied by casting from an aqueous solution of nanocellulose at 2 wt% using a rod at 1m/min. The whole multilayer structure was thereafter assembled in a pilot roll-to-roll laminating system, where the blown PHA-based film was located as the outer layers while the electrospun antimicrobial hot-tack PHBV layer and the barrier CNC coating were placed as interlayers. The resultant multilayer films, having a final thickness in the 130-150 µm range, were characterized to ascertain their potential in biodegradable food packaging. The multilayers showed contact transparency, interlayer adhesion, improved barrier to water and limonene vapors, and intermediate mechanical performance. Moreover, the films presented high antimicrobial and antioxidant activities in both open and closed systems for up to 15 days. Finally, the food safety of the multilayers was assessed by migration and cytotoxicity tests, demonstrating that the films are safe to use in both alcoholic and acid food simulants and they are also not cytotoxic for Caco-2 cells.

Na-Montmorillonite vs. Organically Modified Montmorillonite as Essential Oil Nanocarriers for Melt-Extruded Low-Density Poly-Ethylene Nanocomposite Active Packaging Films with a Controllable and Long-Life Antioxidant Activity

Nowadays, active packaging is becoming significant for the extension of the shelf life of food products via the incorporation of raw nanomaterials such as nanoclays and bioactive compounds such as essential oils (EO). This study aims to study the performance of the sodium montmorillonite (NaMt) and organically modified montmorillonite (OrgMt) as thyme (TO), oregano (OO), and basil (BO) essential oil (EO) control release nanocarriers in low-density poly-ethylene (LDPE) active films. NaMt and OrgMt nanofillers are modified with low (20 wt.%), medium (40 wt.%), and high (80 wt.%) nominal contents of TO, OO, and BO. The novel active packaging films were tested using the X-ray diffraction method (XRD), tensile, water, and oxygen barrier properties, and antioxidant activity tests. For the two most active packaging films, the lipid oxidation of chicken breast fillets estimated by the thiobarbituric-acid-reacting substances (TBARS) method. Overall study shows that both NaMtEO-based and OrgMt-based films exhibited controllable and sustained antioxidant activity. All films retained up to 50-70% of their antioxidant activity after six months of incubation. OrgMtEO-based LDPE films showed more significance applied as active packaging films than NaMtEO-based LDPE films because of their highest tensile and barrier properties.

Biodegradable Poly(ε-Caprolactone) Active Films Loaded with MSU-X Mesoporous Silica for the Release of α-Tocopherol

In this study, new active PCL (poly(ε-caprolactone)) films containing α-tocopherol (TOC) and MSU-X mesoporous silica were prepared by melt blending. The studied additives were directly incorporated into the polymer matrix or by impregnating TOC into MSU-X silica (PCL-IMP). Thermal, optical, oxygen and water barrier properties as well as oxidation onset parameters, were studied. Films containing MSU-X and/or TOC showed a significant increase in oxidative onset temperature (OOT) and oxidative induction time (OIT), improving thermal stability against materials oxidation by the addition of mesoporous silica and TOC into the polymer matrix. In addition, the effect of MSU-X addition on the migration behaviour of α-tocopherol from active films was investigated at 40 °C using 50% (v/v) ethanol as fatty food simulant, showing PCL-IMP films the lower release content and diffusion coefficient (3.5 × 10⁻¹⁵ cm² s⁻¹). Moreover, radical scavenging (DPPH and ABTS) and antibacterial activity against E. coli and S. aureus were favoured by the release of α-tocopherol in the developed films. The obtained results have demonstrated the potential of the new PCL-based active formulations for TOC controlled release in antioxidant and antibacterial food packaging applications.

Evaluation of the Synergistic Antioxidant Effect of Resveratrol and Zataria multiflora Boiss Essential Oil in Sodium Alginate Bioactive Films

BACKGROUND

Biodegradable films are appropriate alternatives to synthetic polymers due to their potential to enhance food safety and their function as a carrier for wide a range of food additives especially natural antioxidants.

OBJECTIVE

The aim of this study was to compare the potential antioxidant activities of sodium alginate films containing resveratrol (RES) alone and in combination with Zataria multiflora essential oil (ZEO) using an in vitro model.

METHODS

At first, the major chemical compositions of ZEO were evaluated by GC/MS. Then, the amount of phenolic compounds of sodium alginate films were evaluated by total phenolic contents assay and antioxidant activities of films were evaluated by 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assays. Finally, the concentrations of ZEO and RES which showed better antioxidant activities in sodium alginate films were incorporated to films in combination forms to evaluate their synergistic effects.

RESULTS

According to gas chromatography-mass spectrometry (GC/MS) analysis, 35 compounds of ZEO were identified and Thymol (37.94%), p-Cymene (9.50%) and 3-Carene (4.98%) were the most important compounds of essential oil, respectively. The results of the radical scavenging evaluations, showed better antioxidant activities of the films containing RES than the films containing ZEO and Butylated hydroxytoluene (BHT). Also, the combined uses of ZEO and RES into alginate films had the synergistic effects (P<0.05).

CONCLUSION

Therefore, it can be concluded that alginate films incorporated with the combination of ZEO and RES is the appropriate option to postpone the oxidative reactions and can be used as natural antioxidant in the food packaging industry.

Functionalization of Polyethylene (PE) and Polypropylene (PP) Material Using Chitosan Nanoparticles with Incorporated Resveratrol as Potential Active Packaging

The present paper reports a novel method to improve the properties of polyethylene (PE) and polypropylene (PP) polymer foils suitable for applications in food packaging. It relates to the adsorption of chitosan-colloidal systems onto untreated and oxygen plasma-treated foil surfaces. It is hypothesized that the first coated layer of chitosan macromolecular solution enables excellent antibacterial properties, while the second (uppermost) layer contains a network of polyphenol resveratrol, embedded into chitosan nanoparticles, which enables antioxidant and antimicrobial properties simultaneously. X-ray photon spectroscopy (XPS) and infrared spectroscopy (FTIR) showed successful binding of both coatings onto foils as confirmed by gravimetric method. In addition, both attached layers (chitosan macromolecular solution and dispersion of chitosan nanoparticles with incorporated resveratrol) onto foils reduced oxygen permeability and wetting contact angle of foils; the latter indicates good anti-fog foil properties. Reduction of both oxygen permeability and wetting contact angle is more pronounced when foils are previously activated by O2 plasma. Moreover, oxygen plasma treatment improves stability and adhesion of chitosan structured adsorbates onto PP and PE foils. Foils also exhibit over 90% reduction of Staphylococcus aureus and over 77% reduction of Escherichia coli as compared to untreated foils and increase antioxidant activity for over a factor of 10. The present method may be useful in different packaging applications such as food (meat, vegetables, dairy, and bakery products) and pharmaceutical packaging, where such properties of foils are desired.

Antimicrobial and Antioxidant Performance of Various Essential Oils and Natural Extracts and Their Incorporation into Biowaste Derived Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Layers Made from Electrospun Ultrathin Fibers

In this research, the antibacterial and antioxidant properties of oregano essential oil (OEO), rosemary extract (RE), and green tea extract (GTE) were evaluated. These active substances were encapsulated into ultrathin fibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from fruit waste using solution electrospinning, and the resultant electrospun mats were annealed to produce continuous films. The incorporation of the active substances resulted in PHBV films with a relatively high contact transparency, but it also induced a slightly yellow appearance and increased the films opacity. Whereas OEO significantly reduced the onset of thermal degradation of PHBV, both the RE and GTE-containing PHBV films showed a thermal stability profile that was similar to the neat PHBV film. In any case, all the active PHBV films were stable up to approximately 200 °C. The incorporation of the active substances also resulted in a significant decrease in hydrophobicity. The antimicrobial and antioxidant activity of the films were finally evaluated in both open and closed systems for up to 15 days in order to anticipate the real packaging conditions. The results showed that the electrospun OEO-containing PHBV films presented the highest antimicrobial activity against two strains of food-borne bacteria, as well as the most significant antioxidant performance, ascribed to the films high content in carvacrol and thymol. Therefore, the PHBV films developed in this study presented high antimicrobial and antioxidant properties, and they can be applied as active layers to prolong the shelf life of the foods in biopackaging applications.

Use of Electrosprayed Agave Fructans as Nanoencapsulating Hydrocolloids for Bioactives

High degree of polymerization Agave fructans (HDPAF) are presented as a novel encapsulating material. Electrospraying coating (EC) was selected as the encapsulation technique and β-carotene as the model bioactive compound. For direct electrospraying, two encapsulation methodologies (solution and emulsion) were proposed to find the formulation which provided a suitable particle morphology and an adequate concentration of β-carotene encapsulated in the particles to provide a protective effect of β-carotene by the nanocapsules. Scanning electron microscopy (SEM) images showed spherical particles with sizes ranging from 440 nm to 880 nm depending on the concentration of HDPAF and processing parameters. FTIR analysis confirmed the interaction and encapsulation of β-carotene with HDPAF. The thermal stability of β-carotene encapsulated in HDPAF was evidenced by thermogravimetric analysis (TGA). The study showed that β-carotene encapsulated in HDPAF by the EC method remained stable for up to 50 h of exposure to ultraviolet (UV) light. Therefore, HDPAF is a viable option to formulate nanocapsules as a new encapsulating material. In addition, EC allowed for increases in the ratio of β-carotene:polymer, as well as its photostability.

Antifungal stilbene impregnation: transport and distribution on the micron-level

The transition from the living water-transporting sapwood to heartwood involves in many tree species impregnation with extractives. These differ in amount and composition, and enhance resistance against bacteria, insects or fungi. To understand the synthesis, transport and impregnation processes new insights into the biochemical processes are needed by in-situ methods. Here we show the extractive distribution in pine (Pinus sylvestris) microsections with a high lateral resolution sampled in a non-destructive manner using Confocal Raman Microscopy. Integrating marker bands of stilbenes and lipids enables to clearly track the rapid change from sapwood to heartwood within one tree ring. The higher impregnation of the cell corner, compound middle lamella, the S3 layer and pits reveals the optimization of decay resistance on the micron-level. Furthermore, deposits with changing chemical composition are elucidated in the rays and lumen of the tracheids. The spectral signature of these deposits shows the co-location of lipids and pinosylvins with changing ratios from the living to the dead tissue. The results demonstrate that the extractive impregnation on the micro- and nano-level is optimized by a symbiotic relationship of lipids and pinosylvins to enhance the tree's resistance and lifetime.

Active Packaging Applications for Food

The traditional role of food packaging is continuing to evolve in response to changing market needs. Current drivers such as consumer's demand for safer, "healthier," and higher-quality foods, ideally with a long shelf-life; the demand for convenient and transparent packaging, and the preference for more sustainable packaging materials, have led to the development of new packaging technologies, such as active packaging (AP). As defined in the European regulation (EC) No 450/2009, AP systems are designed to "deliberately incorporate components that would release or absorb substances into or from the packaged food or the environment surrounding the food." Active packaging materials are thereby "intended to extend the shelf-life or to maintain or improve the condition of packaged food." Although extensive research on AP technologies is being undertaken, many of these technologies have not yet been implemented successfully in commercial food packaging systems. Broad communication of their benefits in food product applications will facilitate the successful development and market introduction. In this review, an overview of AP technologies, such as antimicrobial, antioxidant or carbon dioxide-releasing systems, and systems absorbing oxygen, moisture or ethylene, is provided, and, in particular, scientific publications illustrating the benefits of such technologies for specific food products are reviewed. Furthermore, the challenges in applying such AP technologies to food systems and the anticipated direction of future developments are discussed. This review will provide food and packaging scientists with a thorough understanding of the benefits of AP technologies when applied to specific foods and hence can assist in accelerating commercial adoption.

Development of Water-Triggered Chitosan Film Containing Glucamylase for Sustained Release of Resveratrol

There is a paradox when incorporating enzyme into an edible chitosan film that chitosan is dissolved in acid solution and enzyme activity is maintained under mild conditions. A method for maintaining the pH of the chitosan solution at 4-6 to prepare a chitosan film containing β-cyclodextrin, resveratrol-β-cyclodextrin inclusion (RCI), was developed, using glucamylase and acetic acid. A considerable amount of resveratrol was released by the glucamylase-incorporated film within 15 days, and the maximum amount released was 46% of the total resveratrol content. The highest resveratrol release ratio (released resveratrol/total resveratrol) was obtained in the film with 6 mL of RCI. Scratches and spores were generated on the surface of the glucamylase-added film immersed in water (GAFW) for 7 days because of β-cyclodextrin hydrolysis during film drying and water immersion. RCI and β-cyclodextrin were extruded from the film surface and formed teardrops, which were erased by water on the GAFW surface but appeared on the glucamylase-added film without water immersion (GAF). The bubbles generated by the reaction of acetic acid and residual sodium bicarbonate were observed in both glucamylase-free films immersed in water (GFFW) for 7 days and without water immersion (GFF). The FT-IR spectra illustrated that the covalent bond was not generated during water immersion and β-cyclodextrin hydrolysis. The crystal structure of chitosan was destroyed by water immersion and β-cyclodextrin hydrolysis, resulting in the lowest chitosan crystallization peak at 22°. The increasing of water holding capacity determined by EDX presented the following order: GAF, GFFW, GFF, and GAFW.