Optimization and validation of a liquid chromatography/tandem mass spectrometry (LC-MS/MS) method for the determination of aflatoxins in maize

Simultaneously Selective Separation of Zearalenone and Four Aflatoxins From Rice Samples Using Co-Pseudo-Template Imprinted Polymers With MIL-101(Cr)-NH2 as Core

A novel approach for the simultaneous separation of zearalenone (ZEN) and four types of aflatoxins (AFB1, AFB2, AFG1 and AFG2) from rice samples was presented. This approach utilized modified MIL-101(Cr)-NH2 as core, with molecularly imprinted polymers (MIPs) serving as the shell. The MIL-101(Cr)-NH2 was prepared via ring-opening reaction, while the imprinted polymers were synthesized using warfarin and 4-methylumbelliferyl acetate as co-pseudo template, ethylene glycol dimethacrylate as the cross-linker and azobisisobutyronitrile as initiator. The resulting co-pseudo-template-MIPs (CPT-MIPs) were thoroughly characterized and evaluated. Adsorption studies demonstrate that the adsorption process of CPT-MIPs follows a chemical monolayer adsorption mechanism, with imprinted factors ranging from 1.24 to 1.52 and selective factors ranging from 1.29 to 1.52. Self-made columns were prepared, and the method for separation was developed and validated. The limit of detections ranged from 0.12 to 2.09 μg/kg, and the limit of qualifications ranged from 1.2 to 6.25 μg/kg. To assess the reliability of the method, ZEN and AFs were spiked at three different levels, and the recoveries ranged from 79.53 to 94.58%, with relative standard deviations of 2.90-5.78%.

A highly sensitive Photothermal Immunochromatographic test strip for detection of aflatoxin B1 based on CoS@TA Nanospheres

A novel photothermal immunochromatographic test strip (PITS) with tannic acid (TA) modified cobalt sulfide (CoS) nanospheres (CoS@TA) as immuno-probe element was developed for the detection of aflatoxin B1 (AFB1). CoS nanospheres (CoS NPs) with excellent photothermal conversion efficiency (η = 47.5 %) was synthesized and skillfully chelated with TA to improve its dispersion, biocompatibility, and chromatographic properties. After modification, the CoS@TA coupled with monoclonal antibody (mAb) against AFB1 (CoS@TA-mAb) by simple physical adsorption. The CoS@TA based PITS achieved highly sensitive detection of AFB1 with the limit of detection in photothermal signal (photothermal-LOD) of 0.00503 μg/L, which was 19.88-fold higher than the LOD in visual signal (visual-LOD, 0.1 μg/L). The application of TA in the modification of CoS provided ideas to improve the properties of functional nanomaterials such as dispersion and biocompatibility, and the application of CoS@TA in PITS construction laid a methodological foundation for further improving the detection sensitivity of trace targets.

A biosensor integrating the electrochemical and fluorescence strategies for detection of aflatoxin B1 based on a dual-functionalized platform

BACKGROUND

Aflatoxin B1 (AFB1), is a potent hepatic carcinogen which causes cancer by inducing DNA changes in the liver cells. Variety of methods have been developed for detection of AFB1 which are based on single mode detection strategy. Fabrication of novel platform which are compatible for multimodal detection of AFB1 provide robust performance for reliable detection of AFB1. In this study, we aimed to develop a robust biosensing platform that combines electrochemical and fluorescence techniques for the sensitive and specific detection of Aflatoxin B1.

RESULTS

The sensing platform includes the magnetic core-shell Fe3O4@AuNPs and zeolitic imidazolate framework-8 (ZIF-8). In electrochemical mode, the applied voltametric approach was used through functionalization of glassy carbon electrode and exhibited a linear range between 0.5 and 10000 pg mL-1 with LOD of 0.32 pg mL-1. Fluorescence analysis was based on the FRET on/off status of FAM-functionalized aptamer deposited on the same platform. The FAM emission recovered by the addition of AFB1 concentration in the range of 6-60 fg mL-1 with the LOD of 0.20 fg mL-1. The real sample analysis demonstrated satisfactory relative recoveries in the range of 92.81-105.32 % and 91.66-106.66 % using the electrochemical and fluorescence methods, respectively, and its reliability was confirmed by the HPLC technique.

SIGNIFICANCE

The experimental results affirm that the proposed aptasensor serves as a sensitive, efficient, and precise platform for monitoring AFB1 in both electrochemical and fluorescence detection approaches. Proposed strategy showed efficient selectivity among different analytes and was reproducible. Furthermore, the applicability of biosensor was confirmed in food and biological samples.

Monitoring of Aflatoxins B1, G1, B2, and G2 in Spices from Riyadh Markets by Liquid Chromatography Coupled to Tandem Mass Spectrometry

A total of 1053 samples of spices were collected from Riyadh markets during 2022. The contamination with aflatoxins (AF) B1 (AFB1), B2 (AFB2), G1 (AFG1), and G2 (AFG2) was determined via liquid chromatography coupled to tandem mass spectrometry. AF extraction from spices was performed using an acetonitrile-formic acid mixture. The results obtained show that the highest value for AFB1 (3.865 μg/kg) was detected in the bay leaf sample, while the highest value for AFB2 (3.461 μg/kg) was found in red chili powder. The values of AFG1 and AFG2 did not exceed 2.59 μg/kg. The AF analysis shows that 24 out of 1053 samples (2.3%) contained one or more of these AFs. The highest percentage of contaminated samples was detected in black pepper. AFB1 was found in 21 samples of six types of spices, while AFG2 was detected in eight samples of four types of spices. Also, none of the samples exceeded the Saudi Food and Drug Authority and EU limits of 10 μg/kg. The present research is not a comprehensive study; however, it provides valuable information on AFB1, AFB2, AFG1, and AFG2 levels in the Kingdom of Saudi Arabia spices.

Development of a corn flour certified reference material for the accurate determination of zearalenone

A certified reference material (CRM, KRISS 108-01-002) for zearalenone in corn flour was developed to assure reliable and accurate measurements in testing laboratories. Commercially available corn flour underwent freeze-drying, pulverization, sieving, and homogenization. The final product was packed in amber bottles, approximately 14 g per unit, and preserved at -70 °C. 13C18-Zearalenone was used as an internal standard (IS) for the certification of zearalenone by isotope-dilution liquid chromatography-tandem mass spectrometry (ID-LC‒MS/MS) and for the analysis of α-zearalenol, β-zearalenol, and zearalanone by LC‒MS/MS. The prepared CRM was sufficiently homogeneous, as the among-unit relative standard deviation for each mycotoxin ranged from 2.2 to 5.7 %. Additionally, the stability of the mycotoxins in the CRM was evaluated under different temperature conditions and scheduled test periods, including storage at -70°C, -20°C, and 4°C and room temperature for up to 12 months, 6 months, and 1 month, respectively. The content of each target mycotoxin in the CRM remained stable throughout the monitoring period at each temperature. Zearalenone content (153.6 ± 8.0 µg/kg) was assigned as the certified value. Meanwhile, the contents of α-zearalenol (1.30 ± 0.17 µg/kg), β-zearalenol (4.75 ± 0.33 µg/kg), and zearalanone (2.09 ± 0.16 µg/kg) were provided as informative values.

Determination of aflatoxins in rice from Penang, Malaysia by dispersive liquid-liquid micro-extraction and LC-MS/MS

Rice is one of the crops cultivated in Malaysia, and it is the main diet for most of the population. In this study, dispersive liquid-liquid micro-extraction (DLLME) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) were used to develop, optimise and validate a reliable, easy-to-use and quick approach to detect aflatoxin B1 (AFB1), aflatoxin B2 (AFB2), aflatoxin G1 (AFG1) and aflatoxin G2 (AFG2). The extraction recoveries in DLLME were enhanced by the addition of 5% salt, utilising chloroform as the extraction solvent and acetonitrile as the dispersive solvent. The DLLME parameters - the extraction solvent volume, salt concentration and dispersive solvent volume were optimised with Box-Behnken design (BBD) and response surface methodology (RSM). Under optimised experimental conditions, excellent linearity was obtained with a limit of detection (LOD) ranging from 0.125 to 0.25 ng g-1, a limit of quantitation (LOQ) ranging from 0.25 to 0.3 ng g-1 and a correlation value (R2) of 0.990. The matrix effects were between -11.1% and 19.9%, and recoveries ranged from 87.4% to 117.3%. The optimised and validated method was used effectively to assess aflatoxins contamination in 20 commercial rice samples collected from local supermarkets in Penang, Malaysia. AFB1 was detected at 0.41-0.43 ng g-1 in two rice samples, below the regulatory limit.

Development of a label-free, sensitive gold nanoparticles-poly(adenine) aptasensing platform for colorimetric determination of aflatoxin B1 in corn

In this work, a sensitive colorimetric bioassay method based on a poly(adenine) aptamer (polyA apt) and gold nanoparticles (AuNPs) was developed for the determination of aflatoxin B1 (AFB1). The polyA apt, adsorbed on the AuNPs, especially can bind to the analyte while deterring non-specific interactions. This nano aptasensor uses cationic polymer poly(diallyl dimethyl ammonium chloride) (PDDA), as an aggregating agent, to aggregate gold nanoparticles. PolyA apt-decorated gold nanoparticles (AuNPs/polyA apt) show resistance to PDDA-induced aggregation and maintains their dispersed state (red color) with the optical absorbance signal at λ = 520 nm. However, in the presence of AFB1 in the assay solution, the specific aptamer reacts with high affinity and folds into its three-dimensional form. Aggregation of AuNPs induced by PDDA caused their optical signal shift to λ = 620 nm (blue color). AFB1 concentration in the bioassay solution determines the amount of optical signal shift. Therefore, optical density ratio in two wavelengths (A620/520) can be used as a sturdy colorimetric signal to detect the concentration of aflatoxin B1. AFB1 was linearly detected between 0.5 and 20 ng mL-1, with a detection limit of 0.09 ng mL-1 (S/N = 3). The fabricated aptasensor was applied to the detection of AFB1 in real corn samples.

Determination of Methamphetamine by High-Performance Liquid Chromatography in Odor-Adsorbent Material Used for Training Drug-Detection Animals

The objective of the present report was to develop and validate a simple, sensitive, and selective analytical method for the determination of methamphetamine in an odor-adsorbent material (gauze) which was used to improve and standardize the training method used for drug-detection animals. High-performance liquid chromatography (HPLC) was performed using a Spherisorb ODS2 C18 column (200 mm × 4.6 mm, 5 μm), with a mobile phase consisting of a 0.25% methanol/triethylamine aqueous solution (V:V = 20:80), the pH of which was adjusted to 3.1 using glacial acetic acid, at a flow rate of 1.0 mL/min. The column temperature was 25 °C, and the detection of the analytes was performed at a wavelength of 260 nm. Methamphetamine showed good linearity (R2 = 0.9999) in the range of 4.2~83.2 mg/mL. The stability of the test material was good over 24 h. The precision of the method was good, with an average spiked recovery of 86.2% and an RSD of 2.9%. The methamphetamine content in the gauze sample was determined to be 7.8 ± 2.2 μg/sample. A high-performance liquid chromatography (HPLC) method was optimized and validated for the determination of methamphetamine in adsorbent materials (gauze). Validation data in terms of specificity, linearity, the limit of detection and the limit of quantification, reproducibility, precision, stability, and recovery indicated that the method is suitable for the routine analysis of methamphetamine in adsorbent materials (gauze) and provided a basis for training drug-detection animals.

A high-performance method for quantitation of aflatoxins B1, B2, G1, G2: Full validation for raisin, peanut matrices, and survey of related products at Ho Chi Minh City

Optimization and validation for simultaneous quantitation of four aflatoxins B1, B2, G1, and G2 in peanuts and raisins were performed on ultra-performance liquid chromatography in a combination of fluorescence detector, without derivatization. The advantages were short analysis time, simple sample handling, and reduced solvent consumption. Instrument detection limits of AFB1, AFB2, AFG1, and AFG2 were 0.07, 0.01, 0.1, and 0.008 μg/kg, respectively, lower than those obtained by LCMSMS and HPLC-FLD with derivatization. Two solvent mixtures were chosen for two different matrices whose matrix effect was not negligible (2.81%-8.04% for peanuts and 5.63%-11.43% for raisins). The linear ranges were from 0.2 to 20 μg/L for AFB1 and AFG1 and from 0.05 to 5 μg/L for AFB2 and AFG2. The limits of detection and quantification were 0.025-0.1 and 0.075-0.3 μg/kg for peanuts and raisins, respectively. Recoveries at three other concentrations from 0.75 to 125 μg/kg of total aflatoxins were obtained between 76.5% and 99.8% (with RSD < 6%) following the SANTE 11312/2021. Validation parameters complied with the requirements of ISO/IEC 17025:2017. The extracts and the sample could be stabilized at 4°C and 20°C for 24 h and at -20°C for up to 21 days, respectively. Thus, the study can be used as a standard method for the analysis of Aflatoxins (AFs) in peanut and raisin matrices. Investigation of 350 peanut samples collected at Markets in the central districts of HCM city showed that 28.6% were contaminated with AFB1 from 0.31 up to 554 μg/kg; 13.4% contained AFB2, and 5.7% of AFG1 in the range of 0.4-53 μg/kg and 0.4-9.57 μg/kg, respectively; AFG2 (about 0.6%) was detected from 0.45 to 0.75 μg/kg. Meanwhile, 12.8% exceeded the total aflatoxins limit, and 13.4% exceeded the AFB1 limit. AFs were almost not found in the 350 raisin samples.

Research update on aflatoxins toxicity, metabolism, distribution, and detection: A concise overview

Serious health risks associated with the consumption of food products contaminated with aflatoxins (AFs) are worldwide recognized and depend predominantly on consumed AF concentration by diet. A low concentration of aflatoxins in cereals and related food commodities is unavoidable, especially in subtropic and tropic regions. Accordingly, risk assessment guidelines established by regulatory bodies in different countries help in the prevention of aflatoxin intoxication and the protection of public health. By assessing the maximal levels of aflatoxins in food products which are a potential risk to human health, it's possible to establish appropriate risk management strategies. Regarding, a few factors are crucial for making a rational risk management decision, such as toxicological profile, adequate information concerning the exposure duration, availability of routine and some novel analytical techniques, socioeconomic factors, food intake patterns, and maximal allowed levels of each aflatoxin in different food products which may be varied between countries.

Development of a simple and reliable LC-MS/MS method to simultaneously detect walnut and almond as specified in food allergen labelling regulations in processed foods

We developed a simple and reliable analytical method using high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) to simultaneously detect walnut and almond as specified in regulations for food allergen labelling in processed foods. Five specific target peptides derived from walnut 2S albumin and 7S globulin and three target peptides from almond 11S globulin were selected by analysing several varieties of walnut and almond, eight kinds of other nuts, and ten kinds of major allergen ingredients or cereals. The limit of detection for the walnut 2S albumin peptide GEEMEEMVQSAR (m/z 698.3 [precursor] > 316.1 [product]) was 0.22 ± 0.02 μg/g, and that for almond 11S globulin peptide GNLDFVQPPR (m/z 571.8 [precursor] > 369.2 [product]) was 0.08 ± 0.02 μg/g when extracted walnut and almond protein were spiked into butter cookie chocolate ice cream. These peptides had good linearity (R2 > 0.999) for each calibration curve with a range of 0.1-50 μg/mL protein concentration in the sample solutions, and sufficient recovery rates (90.4-101.5%) from the spiked samples. The developed analytical approach is applicable to a wide variety of processed foods for food allergen labelling.

MXene-based aptasensor for the detection of aflatoxin in food and agricultural products

The detection of toxins that contaminate food needs highly sensitive and selective techniques to prevent substantial monitory loss. In this regard, various nanostructured material-enabled biosensors, have recently been developed to improve the detection of food toxins among them aflatoxin is the prevalent one. The biosensor-based detection of aflatoxin is quick, cheaper, and needs less skilled personnel, therefore overcoming the shortcomings of conventional techniques such as LC/MS-MS, HPLC, and ELISA assays. 2D MXenes manifest as an efficient material for biosensing due to their desirable biocompatibility, magnificent mechanical strength, easiness of surface functionalization, and tuneable optical and electronic features. Contrary to this, aptamers as biorecognition elements (BREs) possess high selectivity, sensitivity, and ease of synthesis when compared to conventional BREs. In this review, we explored the most cutting-edge aptamer-based MXene-enabled biosensing technologies for the detection of the most poisonous mycotoxins (i.e., Aflatoxins) in food and environmental matrices. The discussion begins with the synthesis processes and surface functionalization/modification of MXenes. Computational approaches for designing aptasensors and advanced data analysis based on artificial intelligence and machine learning with special emphasis over Internet-of-Thing integrated biosensing devices has been presented. Besides, the advantages of aptasensors over conventional methods along with their limitations have been briefed. Their benefits, drawbacks, and future potential are discussed concerning their analytical performance, utility, and on-site adaptability. Additionally, next-generation MXene-enabled biosensing technologies that provide end users with simple handling and improved sensitivity and selectivity have been emphasized. Owing to massive applicability, economic/commercial potential of MXene in current and future perspective have been highlighted. Finally, the existing difficulties are scrutinized and a roadmap for developing sophisticated biosensing technologies to detect toxins in various samples in the future is projected.

Advances in the Application of Liquid Chromatography in the Detection of Pollutants

Food is easy to be contaminated because of its complex composition. Therefore, in order to protect people from potential food contaminants, it is very necessary to test for various contaminants in food. Liquid chromatography is widely used in the field of food safety detection. In addition, with the development of liquid chromatography technology, more and more new instruments are combined with liquid chromatography. Compared with traditional liquid chromatography, combined liquid chromatography has great advantages in efficiency and operation. Therefore, it is rapidly promoted in the field of food safety testing. In this paper, the results of the determination of three kinds of food pollutants by different liquid chromatography methods are reviewed, and the indexes are compared and analyzed.

Simultaneous Determination of Aflatoxins and Benzo(a)pyrene in Vegetable Oils Using Humic Acid-Bonded Silica SPE HPLC–PHRED–FLD

In the present work, a rapid, accurate, and cost-effective method was developed for the simultaneous quantification of aflatoxins and benzo(a)pyrene in lipid matrices, using solid-phase extraction (SPE) via humic acid-bonded silica (HAS) sorbents, followed by high-performance liquid chromatography coupled with photochemical post-column reactor fluorescence spectroscopy (HPLC–PHRED–FLD) analysis. The major parameters of extraction efficiency and HPLC–PHRED–FLD analysis were investigated and this method was fully validated. The limits of quantification and the limits of detection were 0.05–0.30 and 0.01–0.09 µg kg⁻¹, respectively. The recoveries were 66.9%–118.4% with intra-day and inter-day precision less than 7.2%. The results of 80 oil samples from supermarkets indicated a high occurrence of BaP, and most of concentrations were within the requirements of EU and China food safety regulations. This is the first utilization of HAS–SPE HPLC–PHRED–FLD to simultaneously analyze the occurrence of aflatoxins and benzo(a)pyrene in vegetable oils.

The Occurrence of Aflatoxins in Date Palm (Phoenix dactylifera L.) Worldwide

Due to global warming, the risk of aflatoxins exposure through the consumption of contaminated food has increased. Aflatoxins pose serious health hazards to humans’ and animals’ health because of their carcinogenic, mutagenic, and teratogenic properties and their immunosuppressive effects. Aflatoxin contamination in various agricultural commodities has attracted much attention worldwide. Date palm fruits are among these important commodities that are vulnerable to fungal contamination and consequent aflatoxins production. Furthermore, dates are often consumed directly without any further processing, which may result in direct exposure to aflatoxins. Moreover, dates are the second dried fruits traded worldwide, which reflects the widespread consumption of dates due to their nutritive values in addition to religious and cultural values. Accordingly, this review summarizes and discusses the frequency and incidence of aflatoxin contamination in dates worldwide and outlines the analytical procedure for aflatoxin determination in dates for the first time. The susceptibility of date palm fruits to aflatoxins contamination has been documented at various levels in several regions. The findings urged the importance of conducting more comprehensive studies on aflatoxin occurrence and contamination levels in dates as a likely contributor to the dietary exposure to aflatoxins.

Review of the Use of Liquid Chromatography-Tandem Mass Spectrometry in Clinical Laboratories: Part I-Development

The process of method development for a diagnostic assay based on liquid chromatography-tandem mass spectrometry (LC-MS/MS) involves several disparate technologies and specialties. Additionally, method development details are typically not disclosed in journal publications. Method developers may need to search widely for pertinent information on their assay(s). This review summarizes the current practices and procedures in method development. Additionally, it probes aspects of method development that are generally not discussed, such as how exactly to calibrate an assay or where to place quality controls, using examples from the literature. This review intends to provide a comprehensive resource and induce critical thinking around the experiments for and execution of developing a clinically meaningful LC-MS/MS assay.

Estimating bulk optical properties of AFB1 contaminated edible oils in 300-900 nm by combining double integrating spheres technique with laser induced fluorescence spectroscopy

An optical detection platform based on laser induced spectroscopy and double integrating spheres techniques was developed to obtain absorption (μ_a), reduced scattering coefficients (μ'_s) and fluorescence intensity of oil. The validation experiment carried on liquid phantoms showed that the developed system could achieve high linearity, and the results of spectra analysis indicated that the fluorescence intensity has a significant negative correlation with both μ_a and μ'_s. A total of 1620 oils with six categories were detected. The reason for the difference of fluorescence and μ_a spectra was analyzed by comparing the measured chlorophyll, polyphenol and α-tocopherol contents. Linear discriminant analysis combined with principal component analysis based on fluorescence and μ_a spectra was employed, to calibrate the AFB₁ classification models. The discrimination results manifested that by integrating μ_a with fluorescence signal, the correct classification rate could be improved by more than 10%, and the false negative rate was greatly reduced.

A novel colorimetric biosensor for sensitive detection of aflatoxin mediated by bacterial enzymatic reaction in saffron samples

Aflatoxin is regarded as the potent carcinogenic agent which is secreted from fungi and present in some food products. So far, many detection methods have been developed to determine the trace amounts of aflatoxin in foods. In the present study a colorimetric competitive assay for detection of aflatoxin B1 (AFB1) has been developed based on interaction of gelatin functionalized gold nanoparticles (AuNPs@gelatin) in specific enzymatic reaction. Bacterial supernatant containing gelatinase enzyme were used as the substrate that could digest the coated gelatin on the surface of AuNPs and following in the presence of NaCl medium ingredient resulted to color change of AuNPs colloidal solution from red to purple. It was observed that with addition of aflatoxin to the bacterial supernatant, aflatoxin could interfere in aggregation of AuNPs and inhibited the process which subsequently prevent the expected color change induced by AuNPs aggregation. The supernatant containing AuNPs were investigated to analyze their induced surface plasmon resonance spectra through UV-visible spectroscopy. The absorption values were directly proportional with the applied AFB1 concentration. The experiment conditions including incubation time, AuNPs concentration and pH were investigated. The obtained results showed that through this approach we could detect the AFB1 in a linear range from 10 to 140 pg ml^-1, with detection limit of 4 pg ml^-1. Real sample assay in saffron samples showed recoveries percentage of 92.4%-95.3%. The applied approach proposed simple, cost effective and specific method for detection of AFB1 toxin in food samples.

Recent Advances in Conventional Methods and Electrochemical Aptasensors for Mycotoxin Detection

The presence of mycotoxins in foodstuffs and feedstuffs is a serious concern for human health. The detection of mycotoxins is therefore necessary as a preventive action to avoid the harmful contamination of foodstuffs and animal feed. In comparison with the considerable expense of treating contaminated foodstuffs, early detection is a cost-effective way to ensure food safety. The high affinity of bio-recognition molecules to mycotoxins has led to the development of affinity columns for sample pre-treatment and the development of biosensors for the quantitative analysis of mycotoxins. Aptamers are a very attractive class of biological receptors that are currently in great demand for the development of new biosensors. In this review, the improvement in the materials and methodology, and the working principles and performance of both conventional and recently developed methods are discussed. The key features and applications of the fundamental recognition elements, such as antibodies and aptamers are addressed. Recent advances in aptasensors that are based on different electrochemical (EC) transducers are reviewed in detail, especially from the perspective of the diagnostic mechanism; in addition, a brief introduction of some commercially available mycotoxin detection kits is provided.

Chemometric Approach Based on Accuracy Profile and Data Chronological Distribution as a Tool to Detect Performance Degradation and Improve the Analytical Quality Control for Aflatoxins' Analysis in Almonds Using UPLC-MS/MS

One of the main objectives of routine laboratories is the development of simple and reliable methods as well as meeting fit-for-purpose criteria for regulatory surveillance. In this study, the accuracy profiles and the evaluation of the distribution of results in the case of aflatoxins in almonds have been performed using ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The method consists of designing the experiment and using certified reference material (CRM) to evaluate the bias, to calculate the combined uncertainty, and to construct the control charts. Good sensitivity (limit of quantifications (LOQs) 0.34-0.5 μg/kg) and recovery (between 82 and 107%) were achieved. The proposed method was successfully tested with a proficiency test in almond powder with acceptable z scores (-2 ≤ z ≤ 2). The results provided direct evidence for the proper functioning and stability of the whole analytical protocol, allowing acceptable combined uncertainty.

Development of a simple and reliable high-performance liquid chromatography-tandem mass spectrometry approach to simultaneously detect grains specified in food allergen labeling regulation on processed food commodities

An analytical approach using high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed to simultaneously detect Fagopyrum esculentum Moench (buckwheat) and cereals containing gluten (Triticum species including wheat and spelt, rye, barley, and oats) that were specified in regulations for food allergen labeling on processed foods. Trypsin-digested peptides were purified from different processed food commodities and heptapeptides derived from buckwheat 13S globulin (GFIVQAR, m/z 395.8 [precursor] > 177.0 [product]) and Triticum low molecular weight glutenin (QIPEQSR, m/z 429.3 [precursor] > 616.2 [product]) were specifically detected each species at levels as low as 0.050-0.056 µg/L and 0.028-0.032 µg/L, respectively. Detection of these synthetic peptides was quantitative to over 100 µg/L by reference to the synthetic peptide calibration curves and at recovery rates, 76.6 ± 4.1%-104.8 ± 17.1% and 82.4 ± 2.0%-105.8 ± 5.3%, for GFIVQAR and QIPEQSR, respectively, when 1-1,000 µg of these peptides were spiked into a retort tomato sauce for pasta or dried instant soup. In combination with LC-MS/MS detection methods specific to other cereals containing gluten (rye, barley, and oats), the developed analytical approach was applicable to a wide variety of processed food commodities for food allergen labeling.

Co-occurrence of mycotoxins, aflatoxin biosynthetic precursors, and Aspergillus metabolites in garlic (Allium sativum L) marketed in Zaria, Nigeria

Multi-mycotoxin analysis of 72 samples of garlic bulbs sold in Zaria markets was carried out using a liquid chromatography-mass spectrometry (LC-MS/MS) method. The results indicated the presence of seven major mycotoxins, including aflatoxin B1 (AFB₁), ochratoxin A (OTA), and the fumonisins B₁, B₂, B₃, B₄, and B₆, at different levels of contamination. AFB1 and OTA were detected in 1 of the 72 samples (1.4%) with median concentrations of 5.48 and 12.3 µg/kg, respectively. FB₁ and FB₂ were detected in 77% and 100% of the analysed samples, with median concentrations of 401 µg/kg and 491 µg/kg, respectively. The observed levels of AFB₁, OTA, FB₁, and FB₂ were above the EU maximum limit in herbal products. Sterigmatocystin (STC), an AFB₁ biosynthetic precursor, was present in all tested samples. The contamination level of mycotoxins and Aspergillus metabolites of marketed garlic in the study area is of public health concern.

Mycotoxins in food: a review on liquid chromatographic methods coupled to mass spectrometry and their experimental designs

The development of a multi-mycotoxins method using LC-MS/MS is necessary and it is clear that the development of such method involves many compromises in the choice of the different parameters. This review summarizes applications using conventional experimental designs and some recent studies using response surface methodology (RSM) as a mathematical modeling tool for the optimization of extraction procedures. The authors also discuss pros and cons of the different procedures. To our knowledge, it is the first review on experimental design for the development of multi-mycotoxin methods. This review could be useful in the development and optimization of LC-MS/MS methods with the aim of describing experimental design and variables (factors) that are likely to affect sensitivity and specificity.

Characteristics, Occurrence, Detection and Detoxification of Aflatoxins in Foods and Feeds

Mycotoxin contamination continues to be a food safety concern globally, with the most toxic being aflatoxins. On-farm aflatoxins, during food transit or storage, directly or indirectly result in the contamination of foods, which affects the liver, immune system and reproduction after infiltration into human beings and animals. There are numerous reports on aflatoxins focusing on achieving appropriate methods for quantification, precise detection and control in order to ensure consumer safety. In 2012, the International Agency for Research on Cancer (IARC) classified aflatoxins B1, B2, G1, G2, M1 and M2 as group 1 carcinogenic substances, which are a global human health concern. Consequently, this review article addresses aflatoxin chemical properties and biosynthetic processes; aflatoxin contamination in foods and feeds; health effects in human beings and animals due to aflatoxin exposure, as well as aflatoxin detection and detoxification methods.

Development and Application of a Novel QuEChERS Method for Monitoring of Tributyltin and Triphenyltin in Bottom Sediments of the Odra River Estuary, North Westernmost Part of Poland

A Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) extraction method combined with Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) for determination of organotin compounds (OTC) has been newly developed. The novel analytical method was validated and the quality of the results was tested by the use of certificate reference material of freshwater sediment BCR 646. The method was applied in determination of OTC concentration in real samples of bottom sediments collected from the Polish part of Odra River Estuary. The samples came from locations with different anthropogenic impact. Additionally, the extraction recovery of OTC and matrix effect on MS signal response was investigated based on those real environmental samples. It was found that organic compounds and anthropogenic contaminations present in bottom sediments may affect extraction efficiency of the organotin compounds (OTC) and change the matrix effect on MS signal response. The highest concentrations of tributyltin were found in bottom sediments collected from locations in vicinity of the Szczecin harbor and shipyards. The presence of triphenyltin above limit of detection (5 ng TPhT/g of sediment) was observed only in two samples and its concentration was several times lower compared to concentration of tributyltin (from 58 ng/g to 5263 ng/g). In spite of the fact that, the application of TBT-based paints on hull of vessel entering EU ports has been banned by European Commission regulation No. 782/2003 since 2008, the OTC compounds are still present in bottom sediment and pose significant threat to the environment. This threat should be taken into account during dredging of waterways and other hydrotechnical works.

Adverse Effects, Transformation and Channeling of Aflatoxins Into Food Raw Materials in Livestock

Aflatoxins are wide-spread harmful carcinogenic secondary metabolites produced by Aspergillus species, which cause serious feed and food contaminations and affect farm animals deleteriously with acute or chronic manifestations of mycotoxicoses. On farm, both pre-harvest and post-harvest strategies are applied to minimize the risk of aflatoxin contaminations in feeds. The great economic losses attributable to mycotoxin contaminations have initiated a plethora of research projects to develop new, effective technologies to prevent the highly toxic effects of these secondary metabolites on domestic animals and also to block the carry-over of these mycotoxins to humans through the food chain. Among other areas, this review summarizes the latest findings on the effects of silage production technologies and silage microbiota on aflatoxins, and it also discusses the current applications of probiotic organisms and microbial products in feeding technologies. After ingesting contaminated foodstuffs, aflatoxins are metabolized and biotransformed differently in various animals depending on their inherent and acquired physiological properties. These mycotoxins may cause primary aflatoxicoses with versatile, species-specific adverse effects, which are also dependent on the susceptibility of individual animals within a species, and will be a function of the dose and duration of aflatoxin exposures. The transfer of these undesired compounds from contaminated feed into food of animal origin and the aflatoxin residues present in foods become an additional risk to human health, leading to secondary aflatoxicoses. Considering the biological transformation of aflatoxins in livestock, this review summarizes (i) the metabolism of aflatoxins in different animal species, (ii) the deleterious effects of the mycotoxins and their derivatives on the animals, and (iii) the major risks to animal health in terms of the symptoms and consequences of acute or chronic aflatoxicoses, animal welfare and productivity. Furthermore, we traced the transformation and channeling of Aspergillus-derived mycotoxins into food raw materials, particularly in the case of aflatoxin contaminated milk, which represents the major route of human exposure among animal-derived foods. The early and reliable detection of aflatoxins in feed, forage and primary commodities is an increasingly important issue and, therefore, the newly developed, easy-to-use qualitative and quantitative aflatoxin analytical methods are also summarized in the review.

A Comprehensive Review on Food Applications of Terahertz Spectroscopy and Imaging

Food product safety is a public health concern. Most of the food safety analytical and detection methods are expensive, labor intensive, and time consuming. A safe, rapid, reliable, and nondestructive detection method is needed to assure consumers that food products are safe to consume. Terahertz (THz) radiation, which has properties of both microwave and infrared, can penetrate and interact with many commonly used materials. Owing to the technological developments in sources and detectors, THz spectroscopic imaging has transitioned from a laboratory-scale technique into a versatile imaging tool with many practical applications. In recent years, THz imaging has been shown to have great potential as an emerging nondestructive tool for food inspection. THz spectroscopy provides qualitative and quantitative information about food samples. The main applications of THz in food industries include detection of moisture, foreign bodies, inspection, and quality control. Other applications of THz technology in the food industry include detection of harmful compounds, antibiotics, and microorganisms. THz spectroscopy is a great tool for characterization of carbohydrates, amino acids, fatty acids, and vitamins. Despite its potential applications, THz technology has some limitations, such as limited penetration, scattering effect, limited sensitivity, and low limit of detection. THz technology is still expensive, and there is no available THz database library for food compounds. The scanning speed needs to be improved in the future generations of THz systems. Although many technological aspects need to be improved, THz technology has already been established in the food industry as a powerful tool with great detection and quantification ability. This paper reviews various applications of THz spectroscopy and imaging in the food industry.