Green synthesis of Eucalyptus globulus zinc nanoparticles and its use in antimicrobial insect repellent paint formulation in bulk industrial production

A multifunctional polyacrylonitrile fibers/alginate-based hydrogel loaded with chamomile extract and silver sulfadiazine for full-thickness wound healing

Most conventional wound dressings do not meet the clinical requisites owing to their limited multifunctionality. Herein, a bilayer wound dressing containing both hydrogel and fibrous structures with multifunctional features was developed for effective skin rehabilitation. Sodium alginate (SA)/gelatin (Gel) hydrogel comprising Matricaria chamomilla L extract and silver sulfadiazine (AgSD) drug as antibacterial agents was cross-linked using genipin and CaCl2. Then, the surface of the hydrogel was covered by electrospun polyacrylonitrile (PAN) nanofibers to fabricate a bilayer dressing. FESEM images revealed formation of continuous, smooth, and bead-free PAN nanofibers with excellent compatibility between hydrogel and fibers. The bilayer wound dressing exhibited satisfactory mechanical virtues including elastic modulus (2.4 ± 0.2 MPa), tensile strength (6.2 ± 0.5 MPa) and elongation at break (21.8 ± 1 %) as well as suitable swelling ratio. Such bilayer dressing revealed biodegradability, cytocompatibility and effective antibacterial performance against gram positive and gram negative strains. Release kinetics of AgSD drug followed a Fickian diffusion mechanism, ensuring sustained drug release. In vivo studies demonstrated bilayer dressing could promote rate of wound closure, re-epithelialization and collagen deposition, facilitating the replacement of damaged skin with healthy tissue. Such engineered wound dressing has a high potency for inducing skin repair and could be used in skin tissue engineering.

Expanding the utilization of alkane mixtures: Enhancing medium chain length polyhydroxyalkanoate production in Pseudomonas resinovorans through alkane monooxygenase overexpression

Medium chain length Polyhydroxyalkanoate (mcl-PHA) is a biodegradable bioplastic material with promising applications in various fields, including the medical, packaging, and agricultural industries. This mcl-PHA can be biosynthesized by microorganisms from various carbon sources, and notably, it can also be produced from alkane mixtures contained in pyrolysis oil derived from low-grade waste plastics. In this study, Pseudomonas resinovorans was engineered to overexpress alkane monooxygenase from Lysinibaillus fusiformis JJY0216, enhancing its ability to utilize alkanes as carbon sources and thereby increasing mcl-PHA production. The engineered strain, P. resinovorans JJY01, demonstrated a notable increase in cell dry weight (CDW) to 0.97 g/L and mcl-PHA production to 0.33 g/L from an optimized alkane mixture, achieving a 1.7-fold enhancement compared to the wild type. The PHA content reached 39.5 %, which is 3.1 times higher than the wild type. Further optimization through fed-batch cultivation resulted in P. resinovorans JJY01 achieving 5.65 g/L of CDW, 3.07 g/L of PHA, and a PHA content of 57.5 % within 96 h. In addition, produced mcl-PHA were characterized through various analytical techniques to assess their physical properties and monomer compositions, highlighting the potential of mcl-PHA produced by P. resinovorans JJY01 as a candidate for medical-grade biopolymers.

A novel multi-functional skin-care dry mask based on Bletilla Striata polysaccharide electrospun nanofibers

The dual challenges of additive safety and environmental sustainability in the current cosmetics market have attracted significant attention. In this study, we obtained raw materials from natural Chinese medicine, combined with electrospinning technology, developed a new type of environmentally friendly dry nanofiber multifunctional mask with Bletilla striata polysaccharide (BSP) as the material and loaded with the sodium ferulate (SF). The optimal manufacturing process was screened by scanning electron microscopy (SEM), and the diameters of the dry nanofiber facial mask (DNFM) were mainly distributed in the range of 180-240 nm. Volunteer experiments and water contact angle assessments showed that the DNFM had good moisture retention and solubility. The experimental findings showcased that the water vapor transmission rate of the PVA/BSP/SF DNFM was 4607.77 ± 74.12 g/m2/day, and the tyrosinase inhibition rate was 52.88 %, over 98 % inhibition rates against Propionibacterium acnes (P. acnes), and a 94.99 ± 0.24 % DPPH free radical scavenging rate. The mouse group treated with the DNFM displayed stronger resistance to UV damage. Cell Counting Kit-8 (CCK8) and Live/Dead staining experiments verified its safety and biocompatibility. The combined application of electrospinning technology and natural Chinese medicine components provides a new strategy for the development of an environmentally friendly and convenient mask product.

Green synthesis of zinc oxide nanoparticles using plant extract for catalysis applications

A plant extract was used as the reducing and capping agent for the green production of zinc oxide nanoparticles. Various techniques, including XRD, SEM, EDX, FT-IR, TGA/DTA, UV-Vis, and TEM, were used for characterization of the materials. These materials exhibited efficient catalysis for the alkylation of acetophenone with benzyl alcohol.

Green synthesis of zinc oxide nanoparticles for the industrial biofortification of (Pleurotus pulmonarius) mushrooms

Zinc malnutrition is major health problem in children and women of reproductive age (WRA) in developing countries. This study aimed to find nutritionally balanced food at an affordable cost. For this purpose, Pleurotus pulmonarius (Mushroom) is fortified with zinc oxide nano particles (ZnO-NPs) synthesized from Nigella sativa seed extract. ZnO-NPs were characterized using UV visible and FTIR Spectroscopy, SEM-EDX, XRD, PSA and Zeta potentials. ZnO-NPs were sprayed in different concentrations on substrate used for the cultivation of P. pulmonarius. Cultivated mushroom fruiting bodies were dried and powdered. Bio absorption of zinc was calculated using atomic absorption spectroscopy. Zinc absorption increased by enhancing the number of nano particles spraying on lingo-cellulosic substrate. The controlled bag had 2.27 ± 0.00 mg of zinc content per 2 g of mushroom powder. The minimum amount (3.46 ± 0.16 mg/2 g of mushroom) of zinc micronutrient was absorbed by the bag having 50 mg spray of ZnO-NPs per Kg of the wheat straw. Maximum amount of bio accumulation was done by bag having 5000 mg spray of ZnO-NPs (10.46 ± 0.08 mg/2 g of mushrooms powder). Zinc fortification had a significant (p < 0.05) effect on the uptake of zinc by fruiting bodies. ZnO-NPs at the concentration of 200 mg per kilogram of substrate gave optimized value of biological efficiency [B.E] (40.2 % ± 0.25), while B.E decreased with the increase in ZnO-NPs spray due to bio accumulation of zinc with increased concentration of ZnO-NPs spray.

ROS/Thermo dual-sensitive hydrogel loaded with a nanoemulsion of patchouli essential oil for ulcerative colitis

Patchouli essential oil (PEO) is acknowledged as a potent contender for the management of ulcerative colitis (UC). However, the limited ability of PEO to be absorbed by the body and its low stability substantially limit its potential uses. Furthermore, UC lesions are mainly concentrated in the rectal and colonic mucosa, with excessive production of reactive oxygen species (ROS). Herein, a nanoemulsion of PEO (PEONE) was developed to enhance the stability and bioavailability of a drug. Subsequently, we developed a novel platform for the rectal administration of a ROS/thermo dual-sensitive Bletilla striata polysaccharide-based hydrogel (RTH) co-loaded with PEONE to efficiently treat UC. As expected, the sol-gel transition of PEONE@RTH, after its intrarectal administration, resulted in its extended presence in the colon and facilitated its attachment to the inflammation site. Moreover, PEONE@RTH alleviated dextran sulfate sodium-induced UC symptoms by suppressing inflammation and oxidative stress, repairing the damage to the intestinal epithelial barrier (claudin-1 and occludin), increasing short-chain fatty acid content and inhibiting the MAPK signalling pathway. Additionally, PEONE@RTH exhibits exceptional safety and biocompatibility. Thus, PEONE@RTH has the potential to provide a novel approach for treating UC and other intestinal disorders characterised by similar clinical conditions.

Disrupting protease and deubiquitinase activities of SARS-CoV-2 papain-like protease by natural and synthetic products discovered through multiple computational and biochemical approaches

The single-stranded RNA genome of SARS-CoV-2 encodes several structural and non-structural proteins, among which the papain-like protease (PLpro) is crucial for viral replication and immune evasion and has emerged as a promising therapeutic target. The current study aims to discover new inhibitors of PLpro that can simultaneously disrupt its protease and deubiquitinase activities. Using multiple computational approaches, six compounds (CP1-CP6) were selected from our in-house compounds database, with higher docking scores (-7.97 kcal/mol to -8.14 kcal/mol) and fitted well in the active pocket of PLpro. Furthermore, utilizing microscale molecular dynamics simulations (MD), the dynamic behavior of selected compounds was studied. Those molecules strongly binds at the PLpro active site and forms stable complexes. The dynamic motions suggest that the binding of CP1-CP6 brought the protein to a closed conformational state, thereby altering its normal function. In an in vitro evaluation, CP2 showed the most significant inhibitory potential for PLpro (protease activity = 2.71 ± 0.33 μM and deubiquitinase activity = 3.11 ± 0.75 μM), followed by CP1, CP5, CP4 and CP6. Additionally, CP1-CP6 showed no cytotoxicity at a concentration of 30 μM in the human BJ cell line.

Synergistic anti-aging effect of Dendrobium officinale polysaccharide and spermidine: A metabolomics analysis focusing on the regulation of lipid, nucleotide and energy metabolism

The importance of synergy has been underscored in recent medical research for augmenting the efficacy of therapeutic interventions, targeting multiple biological pathways simultaneously. Our prior research elucidated that Dendrobium officinale polysaccharide (DOP) has the potential to prolong the lifespan of Caenorhabditis elegans (C. elegans) via regulating gut microbiota. Concurrently, spermidine (Spd), as a mimicking caloric restriction, facilitates autophagy and exerts a pronounced anti-aging effect. To enhance the anti-aging capabilities of DOP, we conducted a comprehensive study examining the combined effects of DOP and Spd in C. elegans, incorporating metabolomics analysis to investigate the underlying mechanisms. A combination of 250 mg/L DOP and 29.0 mg/L Spd yielded the most favorable outcomes in lifespan extension, evidencing a synergistic effect with a combination index (CI) of 0.65. In oxidative and heat stress tolerance assays, the observed CIs were 0.50 and 0.33, respectively. Metabolomic analysis highlighted significant alterations in metabolites related to lipid, nucleotide and energy metabolism, notably regulating glycerol 3-phosphate, linoleoyl glycerol, docosapentaenoic acid and β-nicotinamide mononucleotide, nicotinamide adenine dinucleotide. The effects of DS on lipid metabolism were further validated using Oil Red O staining and triglyceride level in C. elegans. The results indicated that DS may primarily be via modulating lipid metabolism. To further confirm these findings, a high-fat diet-induced mouse model was employed. Consequently, it can be inferred that the synergistic anti-aging impact of DOP and Spd is likely mediated primarily through alterations in lipid metabolic processes.

Poly(allylamine)-adorned heptylcarboxymethyl galactomannan nanocarriers of canagliflozin for controlling type-2 diabetes: Optimization by Box-Behnken design and in vivo performance

In the past three decades, the prevalence of type-2 diabetes has arisen dramatically in countries of all income levels. A novel, most effective nanotechnology-based strategy may reduce the prevalence of diabetes. Recently, the shell-crosslinked polysaccharide-based micellar nanocarriers (MNCs) have shown great promise in terms of stability, controlled drug release, and improved in vivo performance. In this study, heptyl carboxymethyl guar gum was synthesized and characterized by ATR-FTIR, 1HNMR spectroscopy, surface charge, critical micelle concentration (23.9 μg/mL), and cytotoxicity analysis. Box-Behnken design was used to optimize the diameter, zeta potential, drug entrapment efficiency (DEE), and drug release characteristics of poly (allylamine)-crosslinked MNCs containing canagliflozin. The optimized MNCs revealed spherical morphology under TEM and had 149.3 nm diameter (PDI 21.2 %), +53.8 mV zeta potential, and 84 % DEE. The MNCs released about 63 % of the drug in 12 h under varying pH of the simulated gastrointestinal fluid. DSC and x-ray analyses suggested amorphous dispersion of drugs in the MNCs. CAM assay demonstrated the biocompatibility of the MNCs. The MNCs showed hemolysis of <1 %, 85 % mucin adsorption, and stability over three months. The MNCs demonstrated excellent anti-diabetic efficacy in streptozotocin-nicotinamide-induced diabetic rats, continuously lowering blood glucose levels up to 12 h.

Polyhydroxyalkanoates (PHAs) and its copolymer nanocarrier application in cancer treatment: An overview and challenges

In the modern era, nanomedicine has developed novel drug-delivery strategies to improve chemotherapy. Nanotechnological-based treatment approaches for cancer through targeted tumour drug delivery and stimulus-responsive tumour microenvironment have gained tremendous success in oncology. The application of building block materials of these nanomedicines plays a vital role in cancer remediation. Despite successful application in various medical treatments, nanocarriers' lack of biodegradability and biocompatibility makes their use in a clinical context difficult. In addition, the preparation of current drug delivery systems is a major constraint. The current cancer treatment methods aim to destroy diseased tissue, frequently with the use of radiation and chemotherapy. These treatment options are accompanied by a significant level of toxicity, which has excellent potential to further medical issues in the afflicted patient. Polyhydroxyalkanoate (PHA) polymers are biodegradable and biocompatible polyesters that can potentially be used as nanoparticular delivery systems for cancer treatment. Previously, PHA has shown tremendous application as a packaging material in the food and pharma industry. PHA-based nanocarriers are an effective drug delivery system because of their non-immunogenicity, regulated drug release, high drug loading capacity, and targeted drug delivery. This review focuses on creating and using PHA-based nanocarriers in cancer treatment. Despite its many benefits, PHA-based nanocarriers have yet to progress to clinical trials for drug delivery applications due to several issues, including the polymers' hydrophobic nature and high production costs. This review examines these challenges along with existing alternatives.

Chitosan coating of seeds improves the germination and growth performance of plants: A Rreview

This review article explores the fascinating world of chitosan coating applied to seeds and its profound impacts on enhancing the germination process and growth performance of plants. Chitosan, a biodegradable and non-toxic polysaccharide derived from chitin, has shown remarkable potential in seed treatment due to its bioactive properties. The review discusses the mechanisms of chitosan's effect on plant germination including promoting water uptake, enhancing nutrient absorption, and protecting seeds from biotic and abiotic stresses. Moreover, it evaluates the effects of chitosan on plant growth parameters such as root development, shoot growth, chlorophyll content, and overall yield. The review also discusses the sustainable aspects of chitosan coatings in agriculture, emphasizing their eco-friendly nature and potential for reducing reliance on synthetic chemicals. Overall, the findings underscore the significant benefits of chitosan-coated seeds in improving the overall performance of plants, paving the way for a greener and more productive agricultural future. Finally, the article will conclude with a SWOT analysis discussing the strengths, weaknesses, opportunities, and threats of this technology.

Characterization of manganese(II)-coupled functional microorganisms in driving lignin degradation during straw composting

The intricate structure of lignin in straw makes it challenging to hydrolyze, making it a key focus of current research. However, there has been limited study on the effect of enzyme inducer (MnSO4) combined with functional microorganisms on lignin degradation during straw composting. Based on this, four composting treatment groups were set up in this study. Control (CK), functional microorganism addition treatment (F), Mn2+ enzyme inducer (Mn), and Mn2+ enzyme inducer coupled with functional microorganism addition treatment (FMn) were tested for composting. Manganese(II)-coupled microorganisms improved lignin degradation: FMn > Mn > F > CK. They increased the lignin loss rate from 25.54 % to 42.61 %. Laccase activity increased from 3.45 to 43.74 U/g and manganese peroxidase activity increased from 145.52 to 264.91 U/g. And gene abundance was increased. Microbial community structure and dominant genera changed. Structural equations support the idea that functional microorganisms coupled with manganese can modify physicochemical indices, thereby regulating gene expression and enhancing enzyme activity. Furthermore, the stimulation of fungal growth and increased extracellular laccase and manganese peroxidase activities can affect the degradation of lignin. This study provides new insights and theoretical support for efficient lignin degradation and efficient resource utilization of compost products.

Present status and application prospects of green chitin nanowhiskers: A comprehensive review

Petrochemical resources are non-renewable, which has impeded the development of synthetic polymers. The poor degradability of synthetic polymers poses substantial environmental pressure. Additionally, the high cost of synthetic biopolymers with excellent degradation performance limits their widespread application. Thus, it is crucial to seek green, sustainable, low-cost polymers as alternatives to petrochemical-based synthetic polymers and synthetic biopolymers. Chitin is a natural and renewable biopolymer discovered in crustacean shells, insect exoskeletons, and fungal cell walls. Chitin chains consist of crystalline and amorphous regions. Note that various treatments can be employed to remove the amorphous region, enhancing the crystallinity of chitin. Chitin nanowhiskers are a high crystallinity nanoscale chitin product with a high aspect ratio, a large surface area, adjustable surface morphology, and biocompatibility. They discover widespread applications in biomedicine, environmental treatment, food packaging, and biomaterials. Various methods can be utilized for preparing chitin nanowhiskers, including chemical, ionic liquids, deacetylation, and mechanical methods. However, developing an environmentally friendly preparation process remains a big challenge for expanding their applications in different materials and large-scale production. This article comprehensively analyzes chitin nanowhiskers' preparation strategies and their drawbacks. It also highlights the extensive application in different materials and various fields, besides the potential for commercial application.

Biofabrication of aminated nanocellulose reinforced polyvinyl alcohol/chitosan nanofibrous scaffold for sustained release of diltiazem hydrochloride

In the modern environment conscious era, there has been a huge demand for the effective green method to fabricate biomaterials for sustained transdermal release of diltiazem hydrochloride to treat hypertension and cardiac failure. In this vein, the present study explores the amination of waste jute sourced nanocellulose (ANC) and its effect as a reinforcing filler to design electrospun polyvinyl alcohol (PVA)/chitosan based polymeric nanofibrous scaffold for drug delivery. The characterization results of FTIR (Fourier Transform Infrared Spectroscopy) confirm the successful chemical modification of nanocellulose (NCC). SEM (Scanning Electron Microscopy) results indicate the morphological modifications in ANC due to grafting. ANC enhances the mechanical properties of scaffold and sustains the release of the loaded drug to 67.89±3.39% as compared to the pure PVA/chitosan scaffold of 92.63±4.63% over a period of 72 h as shown by the results of in-vitro drug release study. Moreover, the incorporation of 0.5 % ANC improves the anti-bacterial activity against both gram-positive (97.4±4.87%, reduction in viable cells count) and gram-negative bacteria (98.5±4.93%, reduction in viable cells count). Further, the skin irritation and MTT assay authenticate the biocompatibility of the developed scaffold. The overall findings hence prove the efficacy of the engineered scaffold as a potential transdermal patch for sustained drug delivery applications.

Effects of starch filling on physicochemical properties, functional activities, and release characteristics of PBAT-based biodegradable active films loaded with tea polyphenols

In this work, the modification of poly(butylene adipate-co-terephthalate) (PBAT) was combined with the development of active packaging films. PBAT, starch, plasticizer, and tea polyphenols (TP) were compounded and extrusion-blown into thermoplastic starch (TPS)/PBAT-TP active films. Effects of TPS contents on physicochemical properties, functional activities, biodegradability, and release kinetics of PBAT-based active films were explored. Starch interacted strongly with TP through hydrogen bonding and induced the formation of heterogeneous structures in the films. With the increase in TPS contents, surface hydrophilicity and water vapor permeability of the films increased, while mechanical properties decreased. Blending starch with PBAT greatly accelerated degradation behavior of the films, and the T30P70-TP film achieved complete degradation after 180 days. As TPS contents increased, swelling degree of the films increased and TP release were improved accordingly, resulting in significantly enhanced antioxidant and antimicrobial activities. This work demonstrated that filling starch into PBAT-based active films could achieve different antioxidant and antimicrobial activities of the films by regulating film swelling and release behavior.

Extraction and characterization of novel alternative cellulosic fiber for sustainable textiles from Aloe barbadensis Miller stems (agricultural waste)

Novel research has been conducted on Aloe vera, focusing on stems fiber (agricultural waste), for the extraction of cellulosic fiber, an area lacking prior scientific exploration. This fiber is being reported for the first time in the scientific community. Aloe barbadensis Miller variety was subjected to various cultivation methods, including the application of inorganic and organic fertilizers, along with the removal of lower leaves to promote stem growth. Stem fibers were extracted using the water retting method and subsequently analyzed. The moisture content was 55.35 % and 6.99 % ash content in the fibers. The bacteriostatic analysis of Aloe vera fibers was assessed against four bacterial strains, with both ethanol and water extracts showing varying degrees of inhibition zones. The UV-Visible spectrum exhibited a distinct λ max at 247 nm in ethanol, while FT-IR analysis provided characteristic peaks at 3759, 1590, 1750, 1663, 1250, 564, SEM images displayed the smooth surface morphology of the fibers, and X-ray diffraction analysis indicated a high degree of crystallinity (78.67 %), suggesting a well-structured and crystalline nature. Energy dispersive X-ray (EDX) analysis was conducted to determine the elemental composition of the fibers, revealing the presence of carbon, oxygen, calcium, and copper, with carbon being the predominant element in cellulose. These results showed promising properties suggesting potential applications in textile industry as an alternative sustainable natural cellulosic fiber.

Role of chitin synthases CHS1 and CHS2 in biosynthesis of the cyst wall of Cryptocaryon irritans

Cryptocaryon irritans, a protozoan parasite that infects marine fish, is characterized by a complex life cycle that includes a cyst-forming reproductive phase. However, the composition of the cyst wall and mechanism of its formation remain unclear. In this study, we identified chitin as a key component of the cyst wall using calcofluor white and wheat germ agglutinin, with Fourier-transform infrared spectroscopy confirming its β-form structure. Two chitin synthase genes, CHS1 and CHS2, were identified as being expressed throughout the life cycle and show close phylogenetic relationships with chitin synthase from ciliates. Incubation with specific anti-CHS1 and -CHS2 antibodies significantly reduced both the thickness and chitin content of the cyst wall, highlighting the critical role of these enzymes in chitin biosynthesis. Treatment with benzoylureas, which inhibit chitin synthesis, caused thinning of the cyst wall and downregulation of CHS gene expression, resulting in an 84 % reduction in the hatching rate after treatment with 0.01 mM CuSO4 compared with control tomonts. Western blot analysis demonstrated that recombinant CHS proteins are immunogenic, and tomonts from CHS-immunized grouper exhibited reduced size. These findings bridge a crucial knowledge gap in understanding of the C. irritans cyst wall and highlight promising targets for infection prevention and control strategies.

Impact of agar-glycerol ratios on the physicochemical properties of biodegradable seaweed films: A compositional study

To develop technology more applicable to industrial settings, this study aimed to produce agar-based bioplastic films using extrusion followed by hot compression. The research examined various amounts of glycerol incorporation as the plasticizer, which also facilitated the flowability of the extrusion process. These variations included agar-glycerol ratios of 75:25, 70:30, 65:35, 60:40, and 55:45 (% w/w). Moreover, the films underwent thorough testing to assess their physical, mechanical, chemical, water sensitivity, surface imaging, and biodegradability properties. The results showed that increasing the amount of glycerol in the agar film matrix generally made the films more sensitive to water, resulting in greater hydrophilicity. This change was primarily owing to the increased presence of hydroxyl groups. It also affected other characteristics, such as enhancing the film's stretchability and thermal stability. Furthermore, a decrease in film density was observed, leading to reduced tensile strength and barrier properties. Moreover, the higher glycerol content improved its surface wettability and the higher agar content accelerated the film's biodegradability rate. Microstructural examination using scanning electron microscopy and chemical analysis (FTIR) revealed a homogeneous mixture of agar and glycerol produced through the extrusion process. These findings demonstrate the potential of extrusion techniques for the large-scale production of agar-based bioplastics.

Design and optimization of chitosan-coated solid lipid nanoparticles containing insulin for improved intestinal permeability using piperine

The objective of this research was to optimize the composition and performance of chitosan-coated solid lipid nanoparticles carrying insulin (Ch-In-SLNs) and to assess the potential of piperine in enhancing the intestinal permeability of insulin from these SLNs in vitro. The SLNs were formulated from glyceryl behenate (GB), soya lecithin, and poloxamer® 407, and then coated with a combination of chitosan and piperine to facilitate insulin penetration across the gastrointestinal (GI) mucosa. A Box-Behnken Design (BBD) was utilized to optimize the Ch-In-SLNs formulations, with PDI, particle size, zeta potential, and association efficiency (AE) serving as the response variables. The resulting Ch-In-SLNs exhibited excellent monodispersity (PDI = 0.4), optimal particle size (654.43 nm), positive zeta potential (+36.87 mV), and low AE values. The Ch-In-SLNs demonstrated sustained release of insulin for 12 h in simulated gastric fluid (SGF) and intestinal fluid (SIF), with increased release in the latter. After incubation in SGF and SIF for 12 h, the insulin SLNs retained 54 and 41 % of their initial insulin load, respectively, indicating effective protection from gastric enzymes. Permeation studies using goat intestine and Caco-2 cell lines indicated improved insulin permeation in the presence of piperine. Additionally, cell uptake studies confirmed the role of piperine in enhancing insulin permeation.

High freeze-thaw stability of Pickering emulsion stabilized by SPI-maltose particles and its effect on frozen dough

Pickering emulsions with good freeze-thaw stability are essential in frozen food applications. This study developed a high freeze-thaw stabilized soy protein isolate (SPI)-maltose (M) Pickering emulsion and applied it to frozen doughs to investigate and reveal its impacts on the processing properties of the frozen dough. The results showed that after the freeze-thaw cycle, with a volume ratio of 1:2 of SPI to M, the appropriate amount of M changed the structure of SPI. This resulted in the Pickering emulsion prepared by the SPI exhibiting the least droplet coalescence and the best freeze-thaw stability. The results of dough rheological properties, textural properties, and binding capacity with water demonstrated that Pickering emulsions effectively inhibited the loss of gluten protein network structure in the dough after freeze treatment and increased the binding capacity of gluten proteins with starch and water in the dough. The best results were obtained with the incorporation of 3 % SPI-M high freeze-thaw stability, where the amount of bound water following three freeze-thaw cycles was 4.27 times higher than in doughs without Pickering emulsion. Overall, this study is significant for enhancing the freeze-thaw stability of Pickering emulsions stabilized by proteins and providing a new application route for Pickering emulsions.

Carrageenan-ferrocene-eicosapentaenoic acid composite hydrogel induce ferroptosis and apoptosis for anti-tumor recurrence and metastasis

The immune-suppressive microenvironment of solid tumors is a key factor limiting the effectiveness of immunotherapy, which seriously threatens human life and health. Ferroptosis and apoptosis are key cell-death pathways implicated in cancers, which can synergistically activate tumor immune responses. Here, we developed a multifunctional composite hydrogel (CE-Fc-Gel) based on the self-assembly of poloxamer 407, cystamine-linked ιota-carrageenan (CA)-eicosapentaenoic acid (EPA), and ferrocene (Fc). CE-Fc-Gel improved targeting in tumor microenvironment due to its disulfide bonds. Moreover, CE-Fc-Gel promoted lipid peroxidation, enhanced reactive oxygen species (ROS) production, and decreased glutathione peroxidase 4 (GPX4), inducing ferroptosis by the synergistic effect of Fc and EPA. CE-Fc-Gel induced apoptosis and immunogenic cell death (ICD), thereby promoting dendritic cells (DCs) maturation and T cell infiltration. As a result, CE-Fc-Gel significantly inhibited primary and metastatic tumors in vivo. Our findings provide a novel strategy for enhancing tumor immunotherapy by combining apoptosis, ferroptosis, and ICD.

Efficiently manufacturing ectoine via metabolic engineering and protein engineering of L-2,4-diaminobutyrate transaminase

Ectoine, so-called tetrahydropyrimidine, is an important osmotic adjustment solute and widely applied in cosmetics and protein protectant. Some attempts have been made to improve the ectoine productivity. However, the strains with both high ectoine production capacity and high glucose conversion were still absent so far. Aim to construct a strain for efficiently producing ectoine, ectoine synthetic gene cluster ectABC from Pseudomonas stutzeri was overexpressed in E. coli BL21 (DE3). The ection production was improved by 382 % (ectoine titer increased from 1.73 g/L to 8.33 g/L) after the rational design of rate-limiting enzyme L-2,4-diaminobutyrate transaminase EctBps (protein engineering) combined with the metabolic engineering that focused on the enrichment and conversion of precursors. The final strain YW20 was applied to overproduce ectoine in fed-batch fermentation and yield 68.9 g/L of ectoine with 0.88 g/L/h of space-time yield and the highest glucose conversion reported [34 % (g/g)]. From the fermentation broth, ectoine was purified with 99.7 % purity and 79.8 % yield. This study successfully provided an engineered strain as well as an efficient method for the industrial bio-synthesis and preparation of ectoine.

An efficient preparation process of sisal fibers via the specialized retting microorganisms: Based on the ideal combination of degumming-related enzymes for the effective removal of non-cellulosic macromolecules

Bioaugmentation retting with the specialized pectinolytic and xylanolytic microorganisms can accelerate the removal of non-cellulosic macromolecules around plant fibers, thus shortening retting time and facilitating fiber quality. Currently, few specialized microorganisms have been explored for the retting of sisal fibers. The present study excavated the retting fungi including Aspergillus micronesiensis HD 3-6, Penicillium citrinum HD 3-12-3, and Cladosporium sp. HD 4-13 from the region-specific soil samples of planting sisal, and investigated their bioaugmentation retting effects on raw sisal leaves. Results showed that combination of the three fungi achieved the most excellent degumming efficiency (13.69 % of residual gum in sisal fibers) and the highest fiber yield (4.47 %). Furthermore, this fungi combination had the ideal enzymatic hydrolysis features with high activities of pectinase, xylanase and mannanase whereas a low activity of cellulase during the whole retting process, thus endowing the prepared sisal fibers with the lowest mass percentage of non-cellulosic macromolecules (9.76 wt%) and the highest cellulose content (89.23 wt%). SEM and FT-IR analysis further verified that the non-cellulosic substances around sisal fibers were efficiently removed. In summary, the consortia of the three fungi achieved ideal degumming-related enzymes for the removal of non-cellulosic macromolecules, thus acquiring the efficient preparation of sisal fibers.

Exploring the therapeutic potential of Caralluma fimbriata for antioxidant and diabetes management: a 28-day rat model study

This study evaluated the anti-oxidant and anti-diabetic potential of Caralluma fimbriata (CF) in 28-days rat modelling trial. Diabetes is a chronic disorder characterized by elevated blood glucose levels and insulin resistance and cause microvascular and macrovascular issues. Caralluma fimbriata was evaluated for its nutritional composition along with anti-oxidant potential of CF powder (CFP) and CF extract (CFE) using total phenolic contents (TPC), 2,2-diphenyl-1-picrylhydrazyl (DPPH) and ferric ion reducing antioxidant power (FRAP) assays. Furthermore, anti-diabetic potential was computed by dividing rats into four groups of 5 individuals each. Rats of Group I was non-diabetic and no supplementation was given while rats of group II were diabetic and no supplementation was given. While group III and group IV rats were diabetic and received CFP and CFE supplementation respectively. CF powder's TPC, and DPPH and FRAP activity were observed maximum at 44.17 ± 0.006 (μgFe/g) in water, 68.75 ± 0.49 (μgFe/g) in acetone and 800.81 ± 0.99 (μgFe/g) in hexane. Supplementation of CFP and CFE reduced blood glucose effectively i.e. (125.00 ± 4.04 and 121.00 ± 4.49 mg/dL, respectively). Moreover, the consumption of C. fimbriata can be helpful in the management of diabetes mellitus due to its glucose lowering potential, anorexic effects, anti-oxidant potential and α-amylase inhibition.

Antimicrobial potential of oregano essential oil vehiculated in Pickering cellulose nanofibers-stabilized emulsions

Essential oils show several biological properties, such as antimicrobial activity, but have limitations regarding their availability and stability. To maximize their antimicrobial effect and protection against environmental conditions, Pickering-type emulsions were used to vehiculate oregano essential oil (OEO) using cellulose nanofibers (CNF) as emulsion stabilizer. Enzymatic hydrolysis was used to produce CNF from a food industry waste (cassava peel), obtaining an environmentally sustainable emulsion stabilizer. It was evaluated how the different properties of the nanofibers affected the stability of the emulsions. Furthermore, the composition of the dispersed phase was varied (different ratios of OEO and sunflower oil-SO) in view of the target application in biodegradable active coatings. Even at very low concentration (0.01 % w/w), CNF was able to form kinetically stable emulsions with small droplet sizes using oil mixtures (OEO + SO). The stabilization mechanism was not purely Pickering, as there was a reduction in interfacial tension. Excellent antimicrobial activity was observed against bacteria and the fungus Alternaria alternata, demonstrating the ability to apply these emulsions in active systems such as coatings and films. An improvement in the stability of emulsions was observed when using a mixture of oils, which is extremely advantageous considering costs and stability to heat treatments, since the desired antimicrobial activity is maintained for the final application.

Sustainable Synthesis of Novel Green-Based Nanoparticles for Therapeutic Interventions and Environmental Remediation

The advancement in nanotechnology has completely revolutionized various fields, including pharmaceutical sciences, and streamlined the potential therapeutic of many diseases that endanger human life. The synthesis of green nanoparticles by biological processes is an aspect of the newly emerging scientific field known as "green nanotechnology". Due to their safe, eco-friendly, nontoxic nature, green synthesis tools are better suited to produce nanoparticles between 1 and 100 nm. Nanoformulation of different types of nanoparticles has been made possible by using green production techniques and commercially feasible novel precursors, such as seed extracts, algae, and fungi, that act as potent reducing, capping, and stabilizing agents. In addition to this, the biofunctionalization of nanoparticles has also broadened its horizon in the field of environmental remediation and various novel therapeutic innovations including wound healing, antimicrobial, anticancer, and nano biosensing. However, the major challenge pertaining to green nanotechnology is the agglomeration of nanoparticles that may alter the surface topology, which can affect biological physiology, thereby contributing to system toxicity. Therefore, a thorough grasp of nanoparticle toxicity and biocompatibility is required to harness the applications of nanotechnology in therapeutics.

Comparative study on the structure characterization and activity of RS5 made from Canna edulis native starch and high-amylose corn starch

In this study, the high amylose corn starch and Canna edulis native starch were compounded with lauric acid and fermented by human fecal inoculation in vitro. Changes in beneficial metabolite profile and microbiota composition were evaluated. The structural properties showed that both NS-12C and HAMS-12C formed V-shaped crystals under the same preparation method, but NS-12C had a higher composite index and resistance content than HAMS-12C. At the end of fermentation, the starch-lauric acid complexes prepared from the two types of starch significantly promoted the formation of short-chain fatty acids and the contents of acetic acid, butyric acid and valeric acid produced by NS-12C were higher than those of HAMS-12C(p>0.05). HAMS-12C and NS-12C both increased the relative abundance of Blautia. Notably, NS-12C also increased the relative abundance of beneficial bacteria Bifidobacterium and Meganomas, while HAMS-12C did not. These results suggested that this effect may be related to starch type and provide a basis for designing and producing functional foods to improve intestinal health in Canna edulis native starch.

Tunable mechanical properties of chitosan-based biocomposite scaffolds for bone tissue engineering applications: A review

Bone tissue engineering (BTE) aims to develop implantable bone replacements for severe skeletal abnormalities that do not heal. In the field of BTE, chitosan (CS) has become a leading polysaccharide in the development of bone scaffolds. Although CS has several excellent properties, such as biodegradability, biocompatibility, and antibacterial properties, it has limitations for use in BTE because of its poor mechanical properties, increased degradation, and minimal bioactivity. To address these issues, researchers have explored other biomaterials, such as synthetic polymers, ceramics, and CS coatings on metals, to produce CS-based biocomposite scaffolds for BTE applications. These CS-based biocomposite scaffolds demonstrate superior properties, including mechanical characteristics, such as compressive strength, Young's modulus, and tensile strength. In addition, they are compatible with neighboring tissues, exhibit a controlled rate of degradation, and promote cell adhesion, proliferation, and osteoblast differentiation. This review provides a brief outline of the recent progress in making different CS-based biocomposite scaffolds and how to characterize them so that their mechanical properties can be tuned using crosslinkers for bone regeneration.

Insights into Aerosol Emission Control in the Postcombustion CO2 Capture Process: From Cluster Formation to Aerosol Growth

Aerosols produced in the amine carbon capture process can lead to secondary environmental pollution. This study employs molecular dynamics (MD) simulations to investigate cluster formation, amine behavior, and aerosol growth of amines, essential for reducing amine aerosol emissions. Results showed that the cluster evolution process can be divided into cluster formation and growth in terms of molecular content, and the nucleation rate for the present systems was estimated in the order of 1028 cm-3 s-1. CO2 absorption was observed alongside successful nucleation, with CO2 predominantly localizing in the cluster's outer layer postabsorption. Monoethanolamine (MEA) exhibited robust electrostatic interactions with other components via hydrogen bonding, leading to its migration toward regions where CO2 and H2O coexisted within the cluster. While MEA presence markedly spurred cluster formation, its concentration had a marginal effect on the final cluster size. Elevating water content can augment the aerosol growth rate. However, altering the gas saturation is possible only within narrow confines by introducing vapor. Contrarily, gas cooling introduced dual, opposing effects on aerosol growth. These findings, including diffusion coefficients and growth rates, enhance theoretical frameworks for predicting aerosol formation in absorbers, aiding in mitigating environmental impacts of amine-based carbon capture.

Novel approach to water-efficient bulk industrial textile printing production of cotton fabric

Water scarcity poses a global threat in climate change era, and regrettably, the textile processing industry is squandering a significant volume of water during bulk production. This research focused on a sustainable water-saving approach in the printing of cotton fabric by modifying the reactive printing recipe and methodology. Three modified recipes (X, Y, Z) and one controlled recipe (C) were tested using reactive dyes. The conventional reactive printing recipe (Control) includes sodium alginate, urea, mild oxidizing agent, and sodium bicarbonate. In contrast, the modified recipe trials incorporated an acrylic-based synthetic thickener in the replacement of sodium alginate (alone and in combination with sodium alginate). A total of four recipes (one controlled conventional and three modified recipes) were examined using three reactive dyes at two dose levels (2 % and 4 %). Various characterization techniques, including shade variation, color penetration into the fabric, sharpness of the edges, color tinting on the adjacent white fabric, perspiration fastness (both acidic and alkaline), washing fastness, rubbing fastness, and fabric hardness, affirmed that Y recipe yielded the best results in fabric testing, cost reduction, and water conservation. This research represents a pioneering contribution to the printing industry with novel recipes.