Caffeine-loaded whey protein hydrogels reinforced with gellan and enriched with calcium chloride

The Influence of Lyophilization Pretreatment and Whey Content on Whey and Gelatin-Based Hydrogels

Whey and gelatin, natural polymers within the protein category, find widespread use in hydrogel formulations applied across the food, medical, and pharmaceutical industries. This study presents new characteristics of hydrogels based on whey, gelatin, and copper sulfate as a consequence of the additional steps in the preparation method, specifically refrigeration and freezing storage followed by lyophilization. The water state in hydrogels prior to lyophilization impacts the morphological appearance, with refrigerated hydrogels exhibiting a more regular and dense pore distribution, as shown by the Scanning Electron Microscopy (SEM) images. This observation aligns with the higher mobility of polymer chains indicated by T2 distributions in 1H nuclear magnetic resonance (RMN) relaxometry measurements. Changes in the intensity and amide-specific wavenumbers of the FTIR spectra of whey and gelatin proteins are evident in the Fourier Transformed Infrared (FTIR) spectra of crosslinked and frozen hydrogels before lyophilization. Moreover, the reinforcing effect in the hydrogel matrix, noted in mechanical tests, is attributed to increased polymer chain content and copper sulfate crosslinking.

Exploring the Drug-Loading and Release Ability of FucoPol Hydrogel Membranes

The polysaccharide FucoPol has recently been shown to yield hydrogel membranes (HMs) characterized by good mechanical properties, biocompatibility, and anti-inflammatory activity that render them promising biomaterials for use in the biomedical field. Subsequently to such findings, envisaging their development into novel delivery systems for topical applications, in this study, FucoPol HMs prepared by crosslinking the biopolymer with iron cations were loaded with caffeine or diclofenac sodium as model drugs. Two loading methods, namely diffusion and mixing, were applied to evaluate the FucoPol's HM drug-loading capacity and entrapment efficiency. The diffusion method led to a higher caffeine loading (101.9 ± 19.1 mg/g) in the HM1_DCAF membranes, while the mixing method resulted in a higher diclofenac sodium loading (82.3 ± 5.1 mg/g) in the HM1_DDS membranes. The HM1_DCAF membranes were characterized by increased mechanical and rheological parameters, such as their hardness (130.0 ± 5.3 kPa) and storage modulus (1014.9 ± 109.7 Pa), compared to the HM1_DDS membranes that exhibited lower values (7.3 ± 1.2 kPa and 19.8 ± 3.8 Pa, respectively), probably due to leaching occurring during the drug-loading process. The release profiles revealed a fast release of both APIs from the membranes loaded by diffusion, while a prolonged and sustained release was obtained from the membranes loaded by mixing. Moreover, for all API-loaded membranes, the release mechanism followed Fickian diffusion, with the release rate being essentially governed by the diffusion process. These findings, together with their previously shown biological properties, support the suitability of the developed FucoPol HMs to be used as platforms for the topical delivery of drugs.

Evaluation of multicomplex systems on pomegranate concentrate loaded alginate hydrogels by low-field NMR relaxometry: physicochemical characterization and controlled release study

Alginate (ALG) and various gums are potential biomaterials to be employed in hydrogel designs for both food and biomedical applications. This study evaluated a multicomplex design by combining food grade polymers to examine their polymer-polymer interactions and design an oral delivery system for pomegranate concentrate (PC). ALG was replaced with gum tragacanth (GT), xanthan (XN) and their equal combinations (GT:XN) at 50% ratio in hydrogel fabrication. In addition to CaCI2 in binding solution, honey (H) and chitosan (CH) were also used during physical crosslinking. Relaxation time constants in NMR indicated poor ability of GT for water entrapment especially in the presence of honey (S2H). They also confirmed FTIR results indicating similar trends. Strong negative correlations were observed between T2 and texture results. GT replacement of ALG especially in the use of single CaCI2 (S2) promoted higher PC release up to 80% in digestive media compared to XN substitution (S3). This study promoted use of LF NMR as an indicator for polymer mixture characterization in complex gels. ALG based gels could be modified by replacing ALG with different kinds of gums and with use of different binding solutions to regulate target compound release in food and pharmaceutical fields.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05730-2.

Characterization of a Graphene Oxide-Reinforced Whey Hydrogel as an Eco-Friendly Absorbent for Food Packaging

This study presents a structural analysis of a whey and gelatin-based hydrogel reinforced with graphene oxide (GO) by ultraviolet and visible (UV-VIS) spectroscopy, Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The results revealed barrier properties in the UV range for the reference sample (containing no graphene oxide) and the samples with minimal GO content of 0.66×10−3% and 3.33×10−3%, respectively, in the UV-VIS and near-IR range; for the samples with higher GO content, this was 6.67×10−3% and 33.33×10−3% as an effect of the introduction of GO into the hydrogel composite. The changes in the position of diffraction angles 2θ from the X-ray diffraction patterns of GO-reinforced hydrogels indicated a decrease in the distances between the turns of the protein helix structure due to the GO cross-linking effect. Transmission electron spectroscopy (TEM) was used for GO, whilst scanning electron microscopy (SEM) was used for the composite characterization. A novel technique for investigating the swelling rate was presented by performing electrical conductivity measurements, the results of which led to the identification of a potential hydrogel with sensor properties.

Designation and characterization of cold-set egg white protein/dextran sulfate hydrogel for curcumin entrapment

This study aimed to design a cold-set hydrogel of egg white protein (EWP) with good mechanical properties for encapsulating curcumin. Dextran sulfate (DS) and transglutaminase (TGase) were used to control the aggregation and gelation behavior of EWP at preheating step and gelation step, respectively. The optimum soluble protein aggregate size was obtained in the EWP/DS mixture at a mass ratio of 10 under 85 °C preheated (HED₁₀). The presence of TGase further enhanced the cross-linking degree between protein aggregates during the gelation step. The highest gel hardness was found in HED₁₀ hydrogel with TGase, which is almost 10 times the pure EWP gel. Besides, the HED hydrogels effectively slowed down the release rate of curcumin in gastrointestinal digestion. This work provides a theoretical basis for the development of cold-set EWP hydrogel with good mechanical strength by sulfated polysaccharide addition and TGase cross-linking as encapsulation delivery systems.

New Composite Hydrogel Based on Whey and Gelatin Crosslinked with Copper Sulphate

By-products from the meat and dairy industries are important sources of high biological value proteins. This paper explores possibilities for improving the swelling and integrity of a cross-linked whey and gelatin hydrogel with different amounts of CuSO₄ × 5H₂O. Overall, swelling tests demonstrate that cross-linked samples show a better hydration capacity and stability in the hydration medium, but different copper concentrations lead to different swelling behavior. At concentrations smaller than 0.39%, the sample lasts for 75 h in a water environment before beginning to disintegrate. At a concentration of copper sulphate higher than 0.55%, the stability of the sample increased substantially. The swelling kinetics has been investigated. The diffusion constant values increased with the increase in copper concentration, but, at the highest concentration of copper (0.86%), its value has decreased. Spectroscopy analyses such as Fourier transform infrared (FT-IR), X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-VIS), and nuclear magnetic resonance (NMR) relaxometry analyses revealed changes in the secondary and tertiary structure of proteins as a result of the interaction of Cu²⁺ ions with functional groups of protein chains. In addition to its cross-linking ability, CuSO₄ × 5H₂O has also shown excellent antibacterial properties over common bacterial strains responsible for food spoilage. The result of this research demonstrates the potential of this hydrogel system as a unique material for food packaging.

Improvement of low-acyl gellan gum on gelation and microstructural properties of protein hydrolysates from male gonad of scallop (Patinopecten yessoensis)

This study aimed to examine the gelation and microstructural properties of scallop male gonad hydrolysates (SMGHs) in the presence of low-acyl gellan gum (GG) at different mass ratios. The rheological results showed that both elastic modulus and thermal stability of SMGHs were significantly improved by the addition of GG. Meanwhile, the relaxation time T₂₃ was significantly reduced in SMGHs/GG by low-field nuclear magnetic resonance, indicating a strong interaction between SMGHs and GG. Fourier transform infrared spectroscopy indicated the blueshift of amide I and II peaks in SMGHs/GG further demonstrated the electrostatic interaction between SMGHs and GG. The network structure of SMGHs/GG binary complexes was more compact and the surface was smoother than that of SMGHs by cryo-scanning electron microscopy. Furthermore, increasing the content of GG in the SMGHs/GG binary complex significantly reinforced the gel strength and promoted the gelation process.

The Influence of Enzymatic Hydrolysis of Whey Proteins on the Properties of Gelatin-Whey Composite Hydrogels

Amino-acids, peptides, and protein hydrolysates, together with their coordinating compounds, have various applications as fertilizers, nutritional supplements, additives, fillers, or active principles to produce hydrogels with therapeutic properties. Hydrogel-based patches can be adapted for drug, protein, or peptide delivery, and tissue healing and regeneration. These materials have the advantage of copying the contour of the wound surface, ensuring oxygenation, hydration, and at the same time protecting the surface from bacterial invasion. The aim of this paper is to describe the production of a new type of hydrogel based on whey protein isolates (WPI), whey protein hydrolysates (WPH), and gelatin. The hydrogels were obtained by utilizing a microwave-assisted method using gelatin, glycerol, WPI or WPH, copper sulfate, and water. WPH was obtained by enzymatic hydrolysis of whey protein isolates in the presence of bromelain. The hydrogel films obtained have been characterized by FT-IR and UV-VIS spectroscopy. The swelling degree and swelling kinetics have also been determined.

Recent advances in the structure, synthesis, and applications of natural polymeric hydrogels

Hydrogels, polymeric network materials, are capable of swelling and holding the bulk of water in their three-dimensional structures upon swelling. In recent years, hydrogels have witnessed increased attention in food and biomedical applications. In this paper, the available literature related to the design concepts, types, functionalities, and applications of hydrogels with special emphasis on food applications was reviewed. Hydrogels from natural polymers are preferred over synthetic hydrogels. They are predominantly used in diverse food applications for example in encapsulation, drug delivery, packaging, and more recently for the fabrication of structured foods. Natural polymeric hydrogels offer immense benefits due to their extraordinary biocompatible nature. Hydrogels based on natural/edible polymers, for example, those from polysaccharides and proteins, can serve as prospective alternatives to synthetic polymer-based hydrogels. The utilization of hydrogels has so far been limited, despite their prospects to address various issues in the food industries. More research is needed to develop biomimetic hydrogels, which can imitate the biological characteristics in addition to the physicochemical properties of natural materials for different food applications.

Physicochemical characterization of protein isolates of amaranth and common bean and a study of their compatibility with xanthan gum

Vegetables are considered to be a sustainable source of promising biomaterials such as proteins and polysaccharides. In this study, four protein isolates (amaranth protein isolate API, amaranth globulin-rich protein isolate AGR, bean protein isolate BPI, and bean phaseolin-rich protein isolate BPR) were structurally characterized under different pH conditions (2-12) and their compatibility behavior with xanthan gum (XG) in aqueous medium was described. All protein isolates showed β turn and β sheet (78.24-81.11%), as the major secondary structures without statistically significant difference under the pH conditions surveyed. Protein isolates show solubility at pH ≤ 3 (40.4-85.1%) and pH ≥ 8 (57.6-99.9%) and surface hydrophobicity results suggest protein denaturation at pH ≤ 3. In the compatibility study, API/XG ratios between 1:1 and 5:1 at pH from 7 to 9 and the BPI/XG ratios from 1:1 to 20:1 at pH 7 form gels that do not require heating nor crosslinking agent addition. Zeta potential results, on the other hand, evidenced that formation of gels is driven by attractive electrostatic interaction of the charged regions of both biopolymers and intermolecular interactions such as hydrogen bonds.

Multivalent ions and biomolecules: Attempting a comprehensive perspective

Ions are ubiquitous in nature. They play a key role for many biological processes on the molecular scale, from molecular interactions, to mechanical properties, to folding, to self-organisation and assembly, to reaction equilibria, to signalling, to energy and material transport, to recognition etc. Going beyond monovalent ions to multivalent ions, the effects of the ions are frequently not only stronger (due to the obviously higher charge), but qualitatively different. A typical example is the process of binding of multivalent ions, such as Ca2+ , to a macromolecule and the consequences of this ion binding such as compaction, collapse, potential charge inversion and precipitation of the macromolecule. Here we review these effects and phenomena induced by multivalent ions for biological (macro)molecules, from the "atomistic/molecular" local picture of (potentially specific) interactions to the more global picture of phase behaviour including, e. g., crystallisation, phase separation, oligomerisation etc. Rather than attempting an encyclopedic list of systems, we rather aim for an embracing discussion using typical case studies. We try to cover predominantly three main classes: proteins, nucleic acids, and amphiphilic molecules including interface effects. We do not cover in detail, but make some comparisons to, ion channels, colloidal systems, and synthetic polymers. While there are obvious differences in the behaviour of, and the relevance of multivalent ions for, the three main classes of systems, we also point out analogies. Our attempt of a comprehensive discussion is guided by the idea that there are not only important differences and specific phenomena with regard to the effects of multivalent ions on the main systems, but also important similarities. We hope to bridge physico-chemical mechanisms, concepts of soft matter, and biological observations and connect the different communities further.

Design of gel structures in water and oil phases for improved delivery of bioactive food ingredients

Gels are viscoelastic systems built up with a liquid phase entrapped in a three-dimensional network, which can behave as carriers for bioactive food ingredients. Many attempts have been made to design gel structures in the water phase (hydrogels, emulsion gels, bigels) or oil phase (organogels, bigels) in order to improve their delivery performances. Hydrogels are originated from proteins or polysaccharides, which are suitable for the delivery of hydrophilic ingredients. Organogels are mainly built up with the self-assembling of gelator molecules in the oil phase, and they offer good carriers for lipophilic ingredients. Emulsion gels and bigels, containing both aqueous and oil domains, can provide accommodations for lipophilic and hydrophilic ingredients simultaneously. Gel structures (e.g. rheology, texture, water holding capacity, swelling ratio) can be modulated by choosing different gelators, modifying gelation techniques, and the involvement of other ingredients (e.g. oils, emulsifiers, minerals, acids), which then alter the diffusion and release of the bioactive ingredients incorporated. Various studies have proved that gel-based delivery systems are able to improve the stability and bioavailability of many bioactive food ingredients. This review provides a state-to-art overview of different gel-based delivery systems, highlighting the significance of structure-functionality relationship, to provide advanced knowledge for the design of novel functional foods.

Physico-Chemical Changes of Composite Whey Protein Hydrogels in Simulated Gastric Fluid Conditions

Polysaccharide blended whey protein isolate (WPI) hydrogels were developed for the delivery of black carrot ( Daucus carota) concentrate as bioactive agent in simulated gastric fluid (SGF). Pectin (PC), gum tragacanth (GT), and xanthan gum (XG) were blended as additional polymers to modulate the release characteristics of the WPI hydrogels. Experiments showed that sole whey protein (C), XG, and GT blended hydrogels possessed restricted release profiles 67%, 61%, and 67%, respectively, whereas PC samples attained higher release rates (83%) ( p < 0.05). Interactions between polymers and aqueous medium were analyzed by nuclear magnetic resonance relaxometry. C (82 ms) and GT (84 ms) hydrogels attained higher T₂ values than PC (74 ms) and XG (73 ms) samples in SGF. Hardness of only XG hydrogels increased from 1.9 to 4.1 N after gastric treatment. Physicochemical changes within hydrogels during release were also investigated, and hydrogels were proved to be appropriate for desired delivery purposes.

Recent trends on gellan gum blends with natural and synthetic polymers: A review

Gellan gum (GG), a linear negatively charged exopolysaccharide,is biodegradable and non-toxic in nature. It produces hard and translucent gel in the presence of metallic ions which is stable at low pH. However, GG has poor mechanical strength, poor stability in physiological conditions, high gelling temperature and small temperature window.Therefore,it is blended with different polymers such as agar, chitosan, cellulose, sodium alginate, starch, pectin, polyanaline, pullulan, polyvinyl chloride, and xanthan gum. In this article, a comprehensive overview of combination of GG with natural and synthetic polymers/compounds and their applications in biomedical field involving drug delivery system, insulin delivery, wound healing and gene therapy, is presented. It also describes the utilization of GG based materials in food and petroleum industry. All the technical scientific issues have been addressed; highlighting the recent advancement.