Food and salt structure design for salt reducing

Synergistic effect of combining umami substances enhances perceived saltiness

Umami substances have the potential to enhance the perception of saltiness and thus reduce sodium intake. Two sensory evaluation experiments were conducted, involving participants tasting salt solutions, and solutions with added umami substances at equal sodium concentrations. Umami substances included sodium glutamate (MSG), disodium inosinate (IMP), and the combination of them which has a synergistic effect and is a closer match to commonly-consumed foods. In Experiment 1, using the two-alternative forced-choice (2-AFC) method by 330 consumers, paired comparisons were conducted at three different sodium concentrations. The combination of MSG and IMP enhanced the perception of saltiness (p < .001 in the difference test), whereas presenting either umami substance in isolation failed to do so (p > .05 in the similarity test). Significant order effects occurred in paired comparisons. In Experiment 2, a two-sip time-intensity (TI) analysis with trained panellists verified these results and found that tasting MSG and IMP either simultaneously or successively enhanced saltiness perception at equal sodium concentrations. These findings indicate that the synergistic effect of umami substances may be the cause of saltiness enhancement, and represents a potential strategy for sodium reduction while satisfying the consumer demand for saltiness perception. Considering the application in food processing and in food pairing, umami substances can potentially be used to help to reduce salt intake in food consumption.

Effects of polyphenol and gelatin types on the physicochemical properties and emulsion stabilization of polyphenol-crosslinked gelatin conjugates

Herein, six types of polyphenol-crosslinked gelatin conjugates (PGCs) with ≥ two gelatin molecules were prepared using a covalent crosslinking method with two types of polyphenols (tannic acid and caffeic acid) and three types of gelatins (bovine bone gelatin, cold water fish skin gelatin, and porcine skin gelatin) for the emulsion stabilization. The structural and functional properties of the PGCs were dependent on both polyphenol and gelatin types. The storage stability of the conjugate-stabilized emulsions was dependent on the polyphenol crosslinking, NaCl addition, and heating pretreatment. In particular, NaCl addition promoted the liquid-gel transition of the emulsions: 0.2 mol/L > 0.1 mol/L > 0.0 mol/L. Moreover, NaCl addition also increased the creaming stability of the emulsions stabilized by PGCs except tannic acid-crosslinked bovine bone gelatin conjugate. All the results provided useful knowledge on the effects of molecular modification and physical processing on the properties of gelatins.

A review of the world's salt reduction policies and strategies - preparing for the upcoming year 2025

Excessive consumption of dietary sodium is a significant contributor to non-communicable diseases, including hypertension and cardiovascular disease. There is now a global consensus that regulating salt intake is among the most cost-effective measures for enhancing public health. More than half of the countries worldwide have implemented multiple strategies to decrease salt consumption. Nevertheless, a report on sodium intake reduction published by the World Health Organization revealed that the world is off-track to meet its targeted reduction of 30% by 2025. The global situation regarding salt reduction remains concerning. This review will center on domestic and international salt reduction policies, as well as diverse strategies, given the detrimental effects of excessive dietary salt intake and the existing global salt intake scenario. Besides, we used visualization software to analyze the literature related to salt reduction research in the last five years to explore the research hotspots in this field. Our objective is to enhance public awareness regarding the imperative of reducing salt intake and promoting the active implementation of diverse salt reduction policies.

High-throughput characterization of the effect of sodium chloride and potassium chloride on 31 lactic acid bacteria and their co-cultures

Salt (NaCl) is associated with a risk of hypertension and the development of coronary heart disease, so its consumption should be limited. However, salt plays a key role in the quality and safety of food by controlling undesirable microorganisms. Since studies have focused primarily on the effect of salts on the overall counts of the lactic acid bacteria (LAB) group, we have not yet understood how salt stress individually affects the strains and the interactions between them. In this study, we characterized the effect of sodium chloride (NaCl) and potassium chloride (KCl) on the growth and acidification of 31 LAB strains. In addition, we evaluated the effect of salts on a total of 93 random pairwise strain combinations. Strains and co-cultures were tested at 3% NaCl, 5% NaCl, and 3% KCl on solid medium using an automated approach and image analysis. The results showed that the growth of LAB was significantly reduced by up to 68% at 5% NaCl (p < 0.0001). For the co-cultures, a reduction of up to 57% was observed at 5% NaCl (p < 0.0001). However, acidification was less affected by salt stress, whether for monocultures or co-cultures. Furthermore, KCl had a lesser impact on both growth and acidification compared to NaCl. Indeed, some strains showed a significant increase in growth at 3% KCl, such as Lactococcus lactis subsp. lactis 74310 (23%, p = 0.01). More importantly, co-cultures appeared to be more resilient and had more varied responses to salt stress than the monocultures, as several cases of suppression of the significant effect of salts on acidification and growth were detected. Our results highlight that while salts can modulate microbial interactions, these latter can also attenuate the effect of salts on LAB.

Saltiness enhancement by "má là" umami flavor in NaCl model aqueous and oil-added systems

The health concerns associated with high dietary sodium and the quest for a sensory experience have prompted the need for new strategies that can reduce the salt content of foods and have good acceptability. To investigate the cross-modal interaction effects of "má là" umami flavor (total of eight carriers) on the saltiness perception and effective sodium reduction in low-to-strong NaCl aqueous solutions (0.203 %-1.39 %) and oil-added systems (5 %, 10 %, 15 %, 20 %, 25 % canola oil, wt%), sixteen assessors were selected and two methods including saltiness intensity comparison with a category scale and rating with a generalized Labeled Magnitude Scale (gLMS) were used. The results showed PnSnUn carriers significantly enhance saltiness at moderate-to-strong NaCl solutions, and higher saltiness intensity with the addition of canola oil, especially at 25 % oil level. In addition, based on the developed Stevens' power function the sodium reduction was calculated, it was evident that two "má là" umami flavor combinations (one flavor combination was low "má", low "là" and moderate umami, and the other flavor combination with moderate "má", low "là" and moderate umami) were found to perform best with maximum sodium reduction of 18.88 % and 18 %, respectively, and when incorporating 25 % canola oil, the maximum sodium reduction raised by approximately 10 % (to 28.00 % and 28.42 %). This research not only confirmed the positive modulating effect of the "má là" umami flavor on saltiness perception in NaCl solutions, but also showed that the presence of oil further enhanced this effect. This work offered a new and promising insight into the development of foods with reduced sodium content while maintaining the saltiness properties.

Preparation of Saltiness-Enhancing Enzymatic Hydrolyzed Pea Protein and Identification of the Functional Small Peptides of Salt Reduction

According to the correlation of saltiness determined by electronic tongue and perceived NaCl concentration, favorable enzymatic hydrolysis parameters were achieved to prepare the saltiness enhancing mixture peptides from pea protein. Six peptide fractions (F1, F2, F3, F4, F5, and F6) were isolated using Sephadex G-10 gel filtration. Among them, fraction F4 (0.1%) exhibited the highest saltiness (5.90 ± 0.03). The amino acid sequences of five main peptides identified by time-of-flight mass spectrometry were Tyr-Trp (367.40 Da), Gly-Glu-His-Glu (470.43 Da), Glu-Arg-Phe-Gly-Pro (604.65 Da), Gly-Ala-Gly-Lys (331.37 Da), and Pro-Gly-Ala-Gly-Asn (414.41 Da). Tyr-Trp (0.01%) in 0.4% NaCl solution had a 20% saltiness-enhancement compared with 0.4% NaCl solution. More salivary aldosterone was secreted after tasting hydrolysate or Tyr-Trp solutions via enzyme-linked immunosorbent assay, reflecting the improvement of human sensitivity to saltiness. Thereby, the saltiness-enhancing effect was confirmed for the small peptides from hydrolyzed pea protein and the main contributor was further identified.

Sensory, structural breakdown, microstructure, salt release properties, and shelf life of salt-coated air-dried yellow alkaline noodles

Salt reduction in food has been employed to improve public health. The effects of salt coatings on sodium content, sensory properties, structural breakdown, microstructure, salt release properties, and shelf life of yellow alkaline noodles (YAN) were evaluated. 15 g/dL resistant starch HYLON™ VII (HC) or 5% (v/v) Semperfresh™ (SC) with 10, 20, and 30 g/dL sodium chloride (NaCl) were used. HC-Na30 and SC-Na30 had the highest sodium content and came closest to commercial YAN in taste and saltiness perception. Structural improvement was demonstrated with HC-Na10 and SC-Na10 as both noodles required maximum work to be broken down. Moreover, SEM micrographs of these noodles showed a more compact and dense appearance with increased continuity of the matrix and fewer voids and hollows. However, ruptured surfaces were observed in noodles coated with 20 and 30% salt. The enhanced salt release from the coatings was demonstrated in an in vivo analysis, with the released salt occurring rapidly from HC and SC coatings. HC-Na10 and SC-Na10 noodles had a shelf life of more than 8 days when stored at 4 °C, which is longer than HC-Na0 and SC-Na0 noodles. Storage at 4 °C decelerated the microbiological growth, changes in pH and CIE L* values in salt-coated noodles than storage at 25 °. Thus, HC-Na10 and SC-Na10 could be suitable formulations to replace commercial YAN.

Sodium reduction in foods: Challenges and strategies for technical solutions

In many parts of the world, sodium consumption is higher than recommended levels, representing one of the most important food-related health challenges and leading to considerable economical costs for society. Therefore, there is a need to find technical solutions for sodium reduction that can be implemented by food producers and within food services. The aims of this review are to discuss the barriers related to sodium reduction and to highlight a variety of technical solutions. The barriers relate to consumer perception, microbiology, processing, and physicochemistry. Existing technical solutions include inhomogeneous salt distribution, coated salt particles, changing particle sizes and forms, surface coating, multisensory combinations, sodium replacements, double emulsions, adapted serum release by microstructure design, and adapted brittleness by microstructure design. These solutions, their implementation and the associated challenges, and applicable product categories are described. Some of these solutions are ready for use or are in their early development stages. Many solutions are promising, but in most cases, some form of adaptation or optimization is needed before application in specific products, and care must always be taken to ensure food safety. For instance, further research and innovation are required in the dynamic evolution of saltiness perception, consumer acceptance, the binding and migration of sodium, juiciness, microbiological safety, and the timing of salt addition during processing. Once implemented, these solutions will undoubtedly support food producers and food services in reducing sodium content and extend the application of the solutions to different foods.

Development of an Effective Protocol for Evaluating the Saltiness Intensity Enhancement of Umami Compounds

Reducing sodium intake without decreasing saltiness perception remains an important target in the food industry. This study developed an effective protocol for evaluating the saltiness perception enhanced by umami compounds. Two sodium chloride solutions (2.00 and 6.00 g/L) were the preferred concentrations for consumers. Two-alternative forced-choice evaluation results confirmed that at a concentration of 2.00 g/L (sodium concentration), the highest replacement ratios of monosodium glutamate and l-alanine (Ala) were 10 and 20% in sodium chloride solution without saltiness intensity decrease, respectively. The highest replacement ratios of l-glycine (Gly) and Ala were 10 and 20% compared to 6.00 g/L, respectively. Temporal dominance of sensations analysis figured out that gum Arabic (GA) could compensate for the decrease of the retention time and increase the overall saltiness perception in the sodium-reduced sample. Quartz crystal microbalance with dissipation results showed that Ala and Gly could inhibit the binding of Na⁺ to mucin, thereby increasing the saltiness perception. GA exhibited the best saltiness enhancement effect in sodium-reduced solution by producing the nanoparticles from GA, decreasing the stability of the solution system, enhancing the loading effect of mucin on Na⁺, and prolonging the saltiness perception.

Effect of Piperine on Saltiness Perception

Chemical irritants, like piperine, have the potential to increase human perception of tastes and odours, including saltiness. This cross-modal interaction could help the food industry develop new salt-reduced food products that maintain their salty taste. The objective of this study was: firstly, to determine the detection threshold of piperine (n = 72), secondly to evaluate piperine's influence on saltiness perception in model solutions (n = 78), and lastly to identify piperine's effect on sensory perception of low sodium soup using temporal check-all-that-apply (TCATA; n = 75). The group mean of the individual threshold was 0.55 ± 0.15 ppm. Piperine increased the saltiness perception of the model solutions, but it also increased the bitterness and decreased the sweetness of the solutions. The piperine significantly increased the saltiness intensity of the soups (evaluated using a generalized labelled magnitude), but during the TCATA task, the salty attribute was selected less for the soup with piperine than the control (based on the average proportion of selection). The TCATA indicated that the peppery attribute dominated the participants' perception of the soup with piperine. More studies are needed to assess piperine's cross-modal interactions.

Evaluation of Chemical and Sensory Characteristics of Sauerkraut Juice Powder and its Application in Food

Sauerkraut juice is rich in bioactive compounds; however, it is considered a byproduct of the production process. An innovative solution was found through the process of spray-drying to obtain sauerkraut juice powder. The aim of this study was to evaluate chemical and sensory characteristics of sauerkraut juice powder (SJP) and its application in foodstuffs. For SJP, total phenol content, antiradical activity, and nutritional value were determined, and the results showed that SJP is rich in minerals, especially calcium and potassium, as well as organic acids and vitamin C. SJP contains 12% NaCl and a total phenol content of 359.54 mg GAE 100 g^-1 dw. SJP has umami attributes, such as sweet, sour, and salty. Sensory tests-descriptive, rate-all-that-apply, overall liking, and volatile profile determination-were carried out separately in SJP experimental samples with olive oil and sour cream. Among the sweet, sour, and salty flavours, garlic, yogurt, and mayonnaise were also mentioned. In the detection of volatile compounds, leafy and grassy green aromas with light almond were identified in the samples with olive oil and butter and rancid cheese and fishy/amine odours were identified in samples with sour cream. There were significant differences in the overall likability of samples, but the experimental samples with SJP were more popular than control samples; therefore, SJP may be used as a salt alternative in food applications.

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Analysis of Sodium Content in 4082 Kinds of Commercial Foods in China

High-sodium intake is associated with the increased risk of hypertension and cardiovascular disease. Monitoring and analyzing the sodium content in commercial food is instructive for reducing sodium intake in the general population. The sodium content of 4082 commercial foods across 12 food groups and 41 food categories was collected and analyzed, including 4030 pre-packaged foods and 52 artisanal foods. The food group with the highest average sodium content (6888.6 mg/100 g) contained sauces, dressings, springs and dips, followed by bean products (1326.1 mg/100 g) and fish, meat and egg products (1302.1 mg/100 g). The average sodium content of all the collected commercial foods was 1018.6 mg/100 g. Meanwhile, the sodium content of non-alcoholic beverages (49.7 mg/100 g), confectionery (111.8 mg/100 g) and dairy products (164.1 mg/100 g) was much lower than the average sodium content of the 12 food groups. The sodium contents of different food groups and categories were significantly different. The proportion of high-sodium food (600 mg/100 g) was more than one-third of all the products. There are a few products marked with salt reduction on the package. Sixteen salt-reduced products were collected, which belong to the food category of soy sauce and account for 16% of all the soy sauce products. The average sodium content in salt-reduced soy sauce is 2022.8 mg/100 g lower than that of non-salt-reduced soy sauce products. These data provide a primary assessment with sodium content in commercial foods and potential improvements for the food industry to achievement the goal of sodium reduction.

Heterocyclic aromatic amine contents and quality characteristics of bacon as influenced by NaCl concentration of brine

Bacon usually have a high salt content. Excessive intake of salt could cause a harm to human health. Heterocyclic aromatic amines (HAAs) are carcinogenic and mutagenic heterocyclic compounds formed by the reactions of precursor substances at high temperature. This study investigated the influence of different levels of NaCl on the HAA contents and quality characteristics of bacon. Moisture, a_w , L* value, b* value, thiobarbituric acid-reactive substance (TBARS), and carbonyl content increased significantly with a decrease in the NaCl concentration of the brine (p < 0.05). There were no significant differences between treatments for a* value, pH, creatine content, sensory redness, bitterness, or off-odor (p > 0.05). Sensory evaluation showed that saltiness in bacon increased significantly with increased NaCl concentrations in brine. The increased NaCl concentrations decreased the total HAAs in fried bacon (p < 0.05). Moreover, the nonpolar HAA contents in bacon were higher than the polar HAA contents; salt concentration mainly affected the nonpolar HAA content. In summary, salt content had a significant influence on the HAA content and the quality characteristic of bacon.

Sugar reduction methods and their application in confections: a review

Many American adults consume almost double the daily recommended amount of sugar. With excess consumption of sugar and consequential health problems arising, food manufacturers are investigating methods to reduce sugar while maintaining similar functional and sensory properties. The body of literature was searched for papers regarding sugar reduction, and the main methods of sugar reduction are summarized herein with a specific focus on high sugar products. Reducing sugar in confections is possible; however, the challenge is maintaining the balance between texture and sweetness perception. Texture plays a large role in the sweetness perception of confections, with firmer products often being perceived as less sweet. Depending on the method, 20-40% of sugar can be removed from confections without sacrificing sensory acceptance, often replaced with multiple ingredients. Further investigation is needed on confection models and how the emerging health trends set the foundation for sugar reduction.

Development of Strategies to Manufacture Low-Salt Meat Products – A review

Urbanization is usually followed by changes in eating habits, with a specific trend toward the consumption of ready-to-eat products, such as processed foods. Among the latter, meat products are known contributors to high dietary sodium owing to salt addition. Salt plays an essential role in maintaining the quality of meat products in terms of acceptability and safety. However, an excessive salt intake is linked to high blood pressure and cardiovascular diseases. Hence, several studies have been competing for the discovery of salt alternatives performing in a similar way as common salt. A number of replacements have been proposed to reduce salt consumption in meat products while taking into account consumer preferences. Unfortunately, these have resulted in poorer product quality, followed by new adverse effects on health. This review addresses these recent issues by illustrating some established approaches and providing insight into further challenges in developing low-salt meat products.

Effect of Salt Content Reduction on Food Processing Technology

Higher salt intake is associated with the risk of cardiovascular and kidney diseases, hypertension and gastric cancer. Salt intake reduction represents an effective way to improve people’s health, either by the right choice of food or by a reduction of added salt. Salt substitutes are often used and also herb homogenates are treated by high pressure technology. Salt reduction significantly influences the shelf life, texture, pH, taste, and aroma of cheese. The composition of emulsifying salts or starter cultures must be modified to enact changes in microbial diversity, protease activity and the ripening process. The texture becomes softer and aroma atypical. In bakery products, a salt reduction of only 20–30% is acceptable. Water absorption, dough development, length and intensity of kneading and stability of dough are changed. Gluten development and its viscoelastic properties are affected. The salt reduction promotes yeast growth and CO₂ production. Specific volume and crust colour intensity decreased, and the crumb porosity changed. In meat products, salt provides flavour, texture, and shelf life, and water activity increases. In this case, myofibrillar proteins’ solubility, water binding activity and colour intensity changes were found. The composition of curing nitrite salt mixtures and starter cultures must be modified.

Cacao Pod Husk Flour as an Ingredient for Reformulating Frankfurters: Effects on Quality Properties

The cocoa pod husk is considered a source of dietary fiber with a high content of water-soluble pectins, bioactive compounds which should be viewed as a by-product with the potential to be incorporated into food. This study aimed to investigate the effect of adding different cocoa pod husk flour (CPHF) levels as a starch replacement for reformulating frankfurters. Results showed that the addition of 1.5 and 3.0% pod husk proportionally increased the frankfurter’s fiber content by 0.49 ± 0.08 and 0.96 ± 0.19 g/100 g, which is acceptable for a product that does not contain fiber. Textural properties and sensory characteristics were affected when substituting the starch with CPHF, either totally or partially, although these samples had higher water content, hardness, and adhesiveness while springiness decreased. Non-adverse effects of nitrite on polyphenolic compounds content were evidenced in samples enriched with CPHF. The incorporation of CPHF did not significantly affect the color parameters (ΔE < 3). Finally, the panelists indicated a sensation of the unsalted sausage, suggesting that CPHF may have natural mucoadhesion properties. In conclusion, in formulated meat products such as sausages, plant co-products such as cacao pod husks could be a valid new ingredient to improve technological parameters, functional characteristics, and stability.