Fabrication of Phaeodactylum tricornutum extract-loaded gelatin nanofibrous mats exhibiting antimicrobial activity

Electrospun wound dressings with antibacterial function: a critical review of plant extract and essential oil incorporation

Among the many different types of wound dressings, nanofiber-based materials produced through electrospinning are claimed to be ideal because of their advantageous intrinsic properties and the feasibility of employing several strategies to load bioactive compounds into their structure. Bioactive compounds with antimicrobial properties have been incorporated into different wound dressings to promote healing as well as prevent and treat bacterial infections. Among these, natural products, such as medicinal plant extracts and essential oils (EOs), have proven particularly attractive thanks to their nontoxic nature, minor side effects, desirable bioactive properties, and favorable effects on the healing process. To this end, the present review provides an exhaustive and up-to-date revision of the most prominent medicinal plant extracts and EOs with antimicrobial properties that have been incorporated into nanofiber-based wound dressings. The most common methods used for incorporating bioactive compounds into electrospun nanofibers include: pre-electrospinning (blend, encapsulation, coaxial, and emulsion electrospinning), post-electrospinning (physical adsorption, chemical immobilization, and layer-by-layer assembly), and nanoparticle loading. Furthermore, a general overview of the benefits of EOs and medicinal plant extracts is presented, describing their intrinsic properties and biotechniques for their incorporation into wound dressings. Finally, the current challenges and safety issues that need to be adequately clarified and addressed are discussed.

Phytochemical-Based Nanomaterials against Antibiotic-Resistant Bacteria: An Updated Review

Antibiotic-resistant bacteria (ARB) is a growing global health threat, leading to the search for alternative strategies to combat bacterial infections. Phytochemicals, which are naturally occurring compounds found in plants, have shown potential as antimicrobial agents; however, therapy with these agents has certain limitations. The use of nanotechnology combined with antibacterial phytochemicals could help achieve greater antibacterial capacity against ARB by providing improved mechanical, physicochemical, biopharmaceutical, bioavailability, morphological or release properties. This review aims to provide an updated overview of the current state of research on the use of phytochemical-based nanomaterials for the treatment against ARB, with a special focus on polymeric nanofibers and nanoparticles. The review discusses the various types of phytochemicals that have been incorporated into different nanomaterials, the methods used to synthesize these materials, and the results of studies evaluating their antimicrobial activity. The challenges and limitations of using phytochemical-based nanomaterials, as well as future directions for research in this field, are also considered here. Overall, this review highlights the potential of phytochemical-based nanomaterials as a promising strategy for the treatment against ARB, but also stresses the need for further studies to fully understand their mechanisms of action and optimize their use in clinical settings.

Microalgae Photo-Protectants and Related Bio-Carriers Loaded with Bioactive Entities for Skin Applications-An Insight of Microalgae Biotechnology

Microalgae are photosynthetic organisms known for producing valuable metabolites under different conditions such as extreme temperatures, high salinity, osmotic pressure, and ultraviolet radiation. In recent years, these metabolites have become a trend due to their versatility in applications such as pharmaceuticals, cosmetics, and others. They have even been proposed as an alternative source of bioactive metabolites to avoid the harmful effects on the environment produced by active compounds such as oxybenzone in commercials sunscreens. One of the most studied applications is the use of microalgae for skin care and topical use as cosmeceuticals. With the increasing demand for more environmentally friendly products in cosmetics, microalgae have been further explored in relation to this application. It has been shown that some microalgae are resistant to UV rays due to certain compounds such as mycosporine-like amino acids, sporopollenin, scytonemin, and others. These compounds have different mechanisms of action to mitigate UV damage induced. Still, they all have been proven to confer UV tolerance to microalgae with an absorbance spectrum like the one in conventional sunscreens. This review focuses on the use of these microalgae compounds obtained by UV stimulation and takes advantage of their natural UV-resistant characteristics to potentially apply them as an alternative for UV protection products.

Nanotechnologies: An Innovative Tool to Release Natural Extracts with Antimicrobial Properties

Site-Specific release of active molecules with antimicrobial activity spurred the interest in the development of innovative polymeric nanocarriers. In the preparation of polymeric devices, nanotechnologies usually overcome the inconvenience frequently related to other synthetic strategies. High performing nanocarriers were synthesized using a wide range of starting polymer structures, with tailored features and great chemical versatility. Over the last decade, many antimicrobial substances originating from plants, herbs, and agro-food waste by-products were deeply investigated, significantly catching the interest of the scientific community. In this review, the most innovative strategies to synthesize nanodevices able to release antimicrobial natural extracts were discussed. In this regard, the properties and structure of the starting polymers, either synthetic or natural, as well as the antimicrobial activity of the biomolecules were deeply investigated, outlining the right combination able to inhibit pathogens in specific biological compartments.

Impedimetric aptamer based determination of the tumor marker MUC1 by using electrospun core-shell nanofibers

An impedimetric single-shot assay is described for the determination of the proteinic breast cancer marker MUC1. The surface of a glassy carbon electrode was modified with core-shell nanofibers, multi-walled carbon nanotubes and gold nanoparticles that were covalently modified with the MUC1-binding aptamer. Detection is based on the change of the resistance of the electrode surface as measured by electrochemical impedance spectroscopy using hexacyanoferrate(II/III) as an electrochemical probe in working potential is 0.25 V. Scanning electron microscopy and cyclic voltammetry were also applied to characterize the electrode. The analytical response ranges from 5 to 115 nM of MUC1, with a detection limit of 2.7 nM. The assay was successfully applied to MUC1 determination in spiked serum samples where it gave satisfactory results. Graphical abstractAn impedimetric nanoprobe for the tumor marker MUC1 is proposed. It is based on use of electrospun honey core-shell nanofibers. The nanoprobe exhibits excellent sensitivity, good stability and a low detection limit.

Production and characterization of bactericidal wound dressing material based on gelatin nanofiber

Gelatin is a biocompatible and biodegradable natural polymer obtained by collagen. Gelatin nanofibers meet all the necessary requirements when used as wound dressing material. However, their lack of antimicrobial properties limits their use. The purpose of this study is to expand the field of use of gelatin by providing it with antimicrobial properties. For this purpose, poly([2-(methacryloyloxy)ethyl] trimethylammonium chloride) (PMETAC), was used. In this study, the polymers were dissolved in formic acid-acetic acid and nanofibers were synthesized by electrospinning. The obtained nanofibers were characterized with SEM, FTIR, and TGA. The antibacterial effect, degradation tests, and cell viability, adhesion and proliferation were investigated. The SEM studies show that the nanofibers are homogeneous and smooth. At the end of 14 days, all nanofibers lost >90% of their mass. The nanofibers containing PMETAC showed good bactericidal activity against Staphylococcus aureus, Escherichia coli, methicillin-resistant Staphylococcus aureus and Acinetobacter baumannii. MTT test demonstrated that low doses of the nanofibers were biocompatible. The cell adhesion study has been shown that many cells attachment and proliferate on the surface of nanofibers. It has been found that the obtained nanofibers can be used safely and effectively as antimicrobial wound dressing material.

Fabrication and characterization of nanofibers of honey/poly(1,4-cyclohexane dimethylene isosorbide trephthalate) by electrospinning

We report the fabrication of novel nanofibers using naturally occurring antimicrobial honey incorporated in poly(1,4-cyclohexane dimethylene isosorbide trephthalate) (PICT) for the potential wound dressing applications. We fabricated PICT/honey using three blend ratios 90:10, 85:15 and 80:20 respectively. Morphology of PICT nanofibers and PICT/honey nanofibers was observed under Scanning Electron Microscope and it showed bead-free nanofibers. Fourier Transform Infrared Spectroscope was used to confirm the presence of honey in PICT electrospun nanofibers. Tensile strength of PICT/honey nanofibers was slightly reduced with variation in effect of elongation. Water contact angle measurements were done with the static contact angle by a contact angle meter, which showed that hydrophobicity was decreased by adding the honey. The XPS spectra showed that honey was present in the PICT/honey nanofibers. The release behavior of honey was investigated by UV-visible Spectrophotometer. The release was complete in 15min and the maximum release of honey was 72mg/L in 10min. Therefore, PICT/honey nanofibers having 15% concentration of honey are suitable for good elastic behavior and tensile strength as compared to other concentrations of honey.

Functional electrospun fibers for the treatment of human skin wounds

Wounds are trauma induced defects of the human skin involving a multitude of endogenous biochemical events and cellular reactions of the immune system. The healing process is extremely complex and affected by the patient's physiological conditions, potential implications like infectious pathogens and inflammation as well as external factors. Due to increasing incidence of chronic wounds and proceeding resistance of infection pathogens, there is a strong need for effective therapeutic wound care. In this context, electrospun fibers with diameters in the nano- to micrometer range gain increasing interest. While resembling the structure of the native human extracellular matrix, such fiber mats provide physical and mechanical protection (including protection against bacterial invasion). At the same time, the fibers allow for gas exchange and prevent occlusion of the wound bed, thus facilitating wound healing. In addition, drugs can be incorporated within such fiber mats and their release can be adjusted by the material and dimensions of the individual fibers. The review gives a comprehensive overview about the current state of electrospun fibers for therapeutic application on skin wounds. Different materials as well as fabrication techniques are introduced including approaches for incorporation of drugs into or drug attachment onto the fiber surface. Against the background of wound pathophysiology and established therapy approaches, the therapeutic potential of electrospun fiber systems is discussed. A specific focus is set on interactions of fibers with skin cells/tissues as well as wound pathogens and strategies to modify and control them as key aspects for developing effective wound therapeutics. Further, advantages and limitations of controlled drug delivery from fiber mats to skin wounds are discussed and a future perspective is provided.

Fusion of plectasin derivative NZ2114 with hydrophilic random coil polypeptide: Recombinant production in Pichia pastoris and antimicrobial activity against clinical strain MRSA

One of the roadblocks towards the practical use of antimicrobial peptides for medical use is their relatively high cost when synthesized chemically. Effective recombinant production has only been successful in some cases, such as the previously reported production in Pichia pastoris of the antimicrobial plectasin derivative peptide NZ2114. The same production host has also been used extensively to produce so-called protein-polymers: sequences that consist of repetitions of simple amino acid motifs found in structural proteins such as collagen and elastin, and that can be designed to self-assemble in micelles, fibers and hydrogels. With the eventual goal of producing recombinant biomaterials such as antimicrobial protein polymer, we here explore the secreted production in Pichia pastoris of a fusion of NZ2114 with a hydrophilic random coil protein polymer CP4 . The intact NZ2114-CP4 fusion copolymer was produced with a yield of purified protein on the order of 1 g.L-1 supernatant. We find that purified NZ2114-CP4 has an activity against clinical strain MRSA, but very much lower than activity of chemically synthesized NZ2114. We conclude that possibly, the activity of NZ2114 is impaired by the C-terminal attachment to the protein polymer chain, but other reasons for the low activity cannot yet be excluded either. This article is protected by copyright. All rights reserved.

Fabrication of an ultrafine fish gelatin nanofibrous web from an aqueous solution by electrospinning

Electrospinning of aqueous gelatin solution obtained from bovine or porcine sources has been difficult to achieve without additional facilities, such as a temperature control oven or heating cover. Gelatin from cold-water fish has low contents of proline (Pro) and hydroxyproline (Hyp) compared with mammalian-derived gelatin. For this reason, the fish-derived gelatin maintains a sol state without showing gelation behavior at room temperature. In the present study, we prepared an ultrafine fish gelatin nanofibrous web by electrospinning from aqueous solutions without any additive polymers or temperature control facilities. The concentration and viscosity of fish gelatin are the most important factor in determining the electrospinnability and fiber diameter. Electrospinning of aqueous fish gelatin has the highest nanofiber productivity compared to other organic solvent systems. Using glutaraldehyde vapor (GTA), the water stability was improved and substantial enhancement was achieved in the mechanical properties. Finally, the cytotoxicity of a fish gelatin nanofibrous scaffold was evaluated based on a cell proliferation study by culturing human dermal fibroblasts (HDFs) compared with a fish gelatin film and nanofibrous mat from mammalian gelatin. The result shows better initial cell attachment and proliferation compared with the fish gelatin film and no significant difference compared with mammalian-derived gelatin nanofibrous mat. We expect that electrospinning of aqueous fish gelatin could be an effective alternative mammalian gelatin source.

Electrospun protein nanofibers in healthcare: A review

Electrospun nanofibers are being utilized for a wide range of healthcare applications. A plethora of natural and synthetic polymers are exploited for their ability to be electrospun and replace the complex habitat provided by the extracellular matrix for the cells. The fabrication of nanofibers can be tuned to act as a multicarrier system to deliver drugs, growth factors and health supplements etc. in a sustained manner. Owing to its pliability, nanofibers reached its heights in tissue engineering and drug delivery applications. This review mainly focuses on various standardized parameters and optimized blending ratios for animal and plant proteins to yield fine, continuous nanofibers for effective utilization in various healthcare applications.

Preparation of Nanofibers with Renewable Polymers and Their Application in Wound Dressing

Renewable polymers have attracted considerable attentions in the last two decades, predominantly due to their environmentally friendly properties, renewability, good biocompatibility, biodegradability, bioactivity, and modifiability. The nanofibers prepared from the renewable polymers can combine the excellent properties of the renewable polymer and nanofiber, such as high specific surface area, high porosity, excellent performances in cell adhesion, migration, proliferation, differentiation, and the analogous physical properties of extracellular matrix. They have been widely used in the fields of wound dressing to promote the wound healing, hemostasis, skin regeneration, and treatment of diabetic ulcers. In the present review, the different methods to prepare the nanofibers from the renewable polymers were introduced. Then the recent progress on preparation and properties of the nanofibers from different renewable polymers or their composites were reviewed; the application of them in the fields of wound dressing was emphasized.

Advances in skin regeneration: application of electrospun scaffolds

The paucity of cellular and molecular signals essential for normal wound healing makes severe dermatological ulcers stubborn to heal. The novel strategies of skin regenerative treatments are focused on the development of biologically responsive scaffolds accompanied by cells and multiple biomolecules resembling structural and biochemical cues of the natural extracellular matrix (ECM). Electrospun nanofibrous scaffolds provide similar architecture to the ECM leading to enhancement of cell adhesion, proliferation, migration and neo tissue formation. This Review surveys the application of biocompatible natural, synthetic and composite polymers to fabricate electrospun scaffolds as skin substitutes and wound dressings. Furthermore, the application of biomolecules and therapeutic agents in the nanofibrous scaffolds viz growth factors, genes, antibiotics, silver nanoparticles, and natural medicines with the aim of ameliorating cellular behavior, wound healing, and skin regeneration are discussed.

An update on clinical applications of electrospun nanofibers for skin bioengineering

Mimicking morphological similarities of the natural extra cellular matrix (ECM), described by ultrafine continuous fibers, high surface to volume ratio, and high porosity is valuable for effective regeneration of injured skin tissue. Electrospun nanofibers, being one of the most favorable and fast developing products of technology today, display a tremendous potential in wound healing and skin tissue engineering. Under the remarkable attention being given to electrospun nanofibrous scaffolds in promoting wound healing and skin regeneration, this review focuses on the potential of the electrospinning technique as a promising tool for constructing polymeric nanofibrous scaffolds with the favorable physicochemical properties needed for skin bioengineering. In addition, current applications of electrospun nanofibrous matrices for skin bioengineering are detailed in this review.