Synthesis, characterization and antibacterial activity of new fluorescent chitosan derivatives

Present status and application prospects of green chitin nanowhiskers: A comprehensive review

Petrochemical resources are non-renewable, which has impeded the development of synthetic polymers. The poor degradability of synthetic polymers poses substantial environmental pressure. Additionally, the high cost of synthetic biopolymers with excellent degradation performance limits their widespread application. Thus, it is crucial to seek green, sustainable, low-cost polymers as alternatives to petrochemical-based synthetic polymers and synthetic biopolymers. Chitin is a natural and renewable biopolymer discovered in crustacean shells, insect exoskeletons, and fungal cell walls. Chitin chains consist of crystalline and amorphous regions. Note that various treatments can be employed to remove the amorphous region, enhancing the crystallinity of chitin. Chitin nanowhiskers are a high crystallinity nanoscale chitin product with a high aspect ratio, a large surface area, adjustable surface morphology, and biocompatibility. They discover widespread applications in biomedicine, environmental treatment, food packaging, and biomaterials. Various methods can be utilized for preparing chitin nanowhiskers, including chemical, ionic liquids, deacetylation, and mechanical methods. However, developing an environmentally friendly preparation process remains a big challenge for expanding their applications in different materials and large-scale production. This article comprehensively analyzes chitin nanowhiskers' preparation strategies and their drawbacks. It also highlights the extensive application in different materials and various fields, besides the potential for commercial application.

Fabrication and characterization of a new eco-friendly sulfonamide-chitosan derivative with enhanced antimicrobial and selective cytotoxicity properties

Chitosan (CH) exhibits low antimicrobial activity. This study addresses this issue by modifying the chitosan with a sulfonamide derivative, 3-(4-(N,N-dimethylsulfonyl)phenyl)acrylic acid. The structure of the sulfonamide-chitosan derivative (DMS-CH) was confirmed using Fourier transform infrared spectroscopy and Nuclear magnetic resonance. The results of scanning electron microscopy, thermal gravimetric analysis, and X-ray diffraction indicated that the morphology changed to a porous nature, the thermal stability decreased, and the crystallinity increased in the DMS-CH derivative compared to chitosan, respectively. The degree of substitution was calculated from the elemental analysis data and was found to be moderate (42%). The modified chitosan exhibited enhanced antimicrobial properties at low concentrations, with a minimum inhibitory concentration (MIC) of 50 µg/mL observed for B. subtilis and P. aeruginosa, and a value of 25 µg/mL for S. aureus, E. coli, and C. albicans. In the case of native chitosan, the MIC values doubled or more, with 50 µg/mL recorded for E. coli and C. albicans and 100 μg/mL recorded for B. subtilis, S. aureus, and P. aeruginosa. Furthermore, toxicological examinations conducted on MCF-7 (breast adenocarcinoma) cell lines demonstrated that DMS-CH exhibited greater toxicity (IC50 = 225.47 μg/mL) than pure CH, while still maintaining significant safety limits against normal lung fibroblasts (WI-38). Collectively, these results suggest the potential use of the newly modified chitosan in biomedical applications.

New thiadiazole modified chitosan derivative to control the growth of human pathogenic microbes and cancer cell lines

The emergence of multidrug-resistant microbes and the propagation of cancer cells are global health issues. The unique properties of chitosan and its derivatives make it an important candidate for therapeutic applications. Herein, a new thiadiazole derivative, 4-((5-(butylthio)-1,3,4-thiadiazol-2-yl) amino)-4-oxo butanoic acid (BuTD-COOH) was synthesized and used to modify the chitosan through amide linkages, forming a new thiadiazole chitosan derivative (BuTD-CH). The formation of thiadiazole and the chitosan derivative was confirmed by FT-IR, ¹H/¹³C-NMR, GC-MS, TGA, Elemental analysis, and XPS. The BuTD-CH showed a high antimicrobial effect against human pathogens Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, Staphylococcus aureus, and Candida albicans with low MIC values of 25-50 μg ml^-1 compared to unmodified chitosan. The in-vitro cytotoxicity of BuTD-CH was evaluated against two cancer cell lines (MCF-7 and HepG2) and one normal cell (HFB4) using the MTT method. The newly synthesized derivatives showed high efficacy against cancerous cells and targeted them at low concentrations (IC₅₀ was 178.9 ± 9.1 and 147.8 ± 10.5 μg ml^-1 for MCF-7 and HepG2, respectively) compared with normal HFB4 cells (IC₅₀ was 335.7 ± 11.4 μg ml^-1). Thus, low concentrations of newly synthesized BuTD-CH could be safely used as an antimicrobial and pharmacological agent for inhibiting the growth of human pathogenic microbes and hepatocellular and adenocarcinoma therapy.

Vanillin enhances the antibacterial and antioxidant properties of polyvinyl alcohol-chitosan hydrogel dressings

Wound management requires the preparation of controllable, safe and effective dressings to isolate the wound from the external environment. Currently, widely used commercial dressings focus on the isolation effect rather than an environment conducive to wound healing. To provide the dressing with beneficial properties such as wetting and antioxidant and antibacterial activity, this study used polyvinyl alcohol (PVA) hydrogel as the base material and introduced chitosan (CS) and vanillin (V) to design a PVA/CS/V three-phase hydrogel dressing. The dressings were prepared using a freeze-thaw cycle to achieve properties. We conducted a comparative analysis of PVA/V and PVA/CS two-phase hydrogels. The PVA/CS/V (PCV) hydrogel dressing maintaining an elastic modulus at >5 kPa at 15-40 °C. An in vitro antibacterial assay showed the potent antibacterial ability of hydrogels against gram-positive and -negative bacteria, and cells in some PCV groups showed higher activity. The antioxidant results showed that PCV hydrogel had a potent scavenging effect on DPPH, ABTS⁺, and PTIO free radical. The antibacterial and antioxidant properties of three-phase hydrogel showed the best performance in all experimental groups. These results suggest that PCV hydrogel has value in commercial applications due to its simple preparation process and excellent biological properties.

Synergistic performance of collagen-g-chitosan-glucan fiber biohybrid scaffold with tunable properties

Hybrid biocomposite scaffolds (HBS) that serve as a carrier for cell proliferation and differentiation are increasingly used for tissue regeneration. 3D hybrid scaffold based on collagen-grafted-chitosan-glucan fiber (CO-g-CGF-HBS) was prepared by freeze-drying technique. The swelling percentage, hydrolytic stability, and modulus of elasticity of HBS were enhanced after the chemical modification of CO with CGF. Pore size and porosity of HBS were decreased with an increased CGF ratio. HBS exhibits a higher reduction rate against different types of bacteria compared with a control sample. Thus, chemical modification of CO with different ratios of CGF significantly improved the physicochemical, antibacterial properties of HBS.

Enhanced antibacterial activity of lysozyme loaded quaternary ammonium chitosan nanoparticles functionalized with cellulose nanocrystals

In this study, cellulose nanocrystals (CNC) as functional cross-linker and Pickering emulsifier was used to stabilize Lysozyme (Lys) encapsulated in quaternary ammonium chitosan nanoparticles (QC NPs) via ionic gelation method. Physicochemical, structural, and antibacterial properties of the CNC stabilized Lys loaded QC NPs were also evaluated. Particle size, particle size distribution, Zeta potential (ZP), and spectroscopic analyses showed the successful encapsulation of Lys. Antibacterial activity of NPs against Staphylococcus aureus and Vibrio parahaemolyticus was investigated on the basis of inhibition zone (IZ), minimum inhibitory concentration (MIC), and minimum bacterial concentration (MBC). MIC and MBC of CNC stabilized Lys loaded HQC NPs against S. aureus were 0.094 and 0.188 while corresponding values for CNC stabilized Lys loaded LQC NPs V. parahaemolyticus were 0.156 and 0.312 mg/mL, respectively. Therefore, CNC stabilized Lys loaded QC NPs have potential implications in the food industry for food preservation and packaging.

Wound dressing of chitosan-based-crosslinked gelatin/ polyvinyl pyrrolidone embedded silver nanoparticles, for targeting multidrug resistance microbes

Wound dressing composed of chitosan, based crosslinked gelatin/ polyvinyl pyrrolidone, embedded silver nanoparticles were fabricated using solution casting method. The membrane was characterized by FTIR, SEM and TGA. Glutaraldehyde (0.5 %) was used for the crosslinking of membrane components and associated with 7-folds boosted mechanical performance, 28 % more hydrolytic stability, 3-folds thickness reduction and morphological roughness. Silver nanoparticles were characterized by UV-vis, XRD and TEM for an average size of 9.9 nm. The membrane with higher concentration of silver nanoparticles showed maximum antibacterial activity against human pathogenic bacteria; and the measured inhibition zones ranged from 1.5 to 3 cm. The activity of the particles ranged from severe to complete reduction in Penicillin, Erythromycin and Macrolide family's resistance genes expression such as β-Lactamase, mecA and erm. This developed membrane can serve as promising and cost-effective system against severe diabetic and burn wound infections.

Chitosan-glucan complex hollow fibers reinforced collagen wound dressing embedded with aloe vera. II. Multifunctional properties to promote cutaneous wound healing

This study presents an innovative multifunctional system in fabricating new functional wound dressing (FWD) products that could be used for skin regeneration, especially in cases of infected chronic wounds and ulcers. The innovation is based on the extraction, characterization, and application of collagen (CO)/chitosan-glucan complex hollow fibers (CSGC)/aloe vera (AV) as a novel FWS. For the first time, specific hollow fibers were extracted with controlled inner (500-900 nm)/outer (2-3 µm) diameters from mycelium of Schizophyllum commune. Further on, research and evaluation of morphology, hydrolytic stability, and swelling characteristics of CO/CSGC@AV were carried out. The obtained FWS showed high hydrolytic stability with enhanced swelling characteristics compared to native collagen. The hemostatic effect of FWS increased significantly in the presence of CSGC, compared to native CO and displayed excellent biocompatibility which was tested by using normal human dermal fibroblast (NHDF). The FWS showed high antibacterial activity against different types of bacteria (positive/negative grams). From in vivo measurements, the novel FWS increased the percentage of wound closure after one week of treatment. All these results imply that the new CO/CSGC@AV-FWD has the potential for clinical skin regeneration and applying for controlled drug release.

Soil Application of Nano Silica on Maize Yield and Its Insecticidal Activity Against Some Stored Insects After the Post-Harvest

Maize is considered one of the most imperative cereal crops worldwide. In this work, high throughput silica nanoparticles (SiO2-NPs) were prepared via the sol–gel technique. SiO2-NPs were attained in a powder form followed by full analysis using the advanced tools (UV-vis, HR-TEM, SEM, XRD and zeta potential). To this end, SiO2-NPs were applied as both nanofertilizer and pesticide against four common pests that infect the stored maize and cause severe damage to crops. As for nanofertilizers, the response of maize hybrid to mineral NPK, “Nitrogen (N), Phosphorus (P), and Potassium (K)” (0% = untreated, 50% of recommended dose and 100%), with different combinations of SiO2-NPs; (0, 2.5, 5, 10 g/kg soil) was evaluated. Afterward, post-harvest, grains were stored and fumigated with different concentrations of SiO2-NPs (0.0031, 0.0063. 0.25, 0.5, 1.0, 2.0, 2.5, 5, 10 g/kg) in order to identify LC50 and mortality % of four common insects, namely Sitophilus oryzae, Rhizopertha dominica, Tribolium castaneum, and Orizaephilus surinamenisis. The results revealed that, using the recommended dose of 100%, mineral NPK showed the greatest mean values of plant height, chlorophyll content, yield, its components, and protein (%). By feeding the soil with SiO2-NPs up to 10 g/kg, the best growth and yield enhancement of maize crop is noticed. Mineral NPK interacted with SiO2-NPs, whereas the application of mineral NPK at the rate of 50% with 10 g/kg SiO2-NPs, increased the highest mean values of agronomic characters. Therefore, SiO2-NPs can be applied as a growth promoter, and in the meantime, as strong unconventional pesticides for crops during storage, with a very small and safe dose.

Soil Application of Nano Silica on Maize Yield and Its Insecticidal Activity Against Some Stored Insects After the Post-Harvest

Maize is considered one of the most imperative cereal crops worldwide. In this work, high throughput silica nanoparticles (SiO₂-NPs) were prepared via the sol-gel technique. SiO₂-NPs were attained in a powder form followed by full analysis using the advanced tools (UV-vis, HR-TEM, SEM, XRD and zeta potential). To this end, SiO₂-NPs were applied as both nanofertilizer and pesticide against four common pests that infect the stored maize and cause severe damage to crops. As for nanofertilizers, the response of maize hybrid to mineral NPK, "Nitrogen (N), Phosphorus (P), and Potassium (K)" (0% = untreated, 50% of recommended dose and 100%), with different combinations of SiO₂-NPs; (0, 2.5, 5, 10 g/kg soil) was evaluated. Afterward, post-harvest, grains were stored and fumigated with different concentrations of SiO₂-NPs (0.0031, 0.0063. 0.25, 0.5, 1.0, 2.0, 2.5, 5, 10 g/kg) in order to identify LC₅₀ and mortality % of four common insects, namely Sitophilus oryzae, Rhizopertha dominica, Tribolium castaneum, and Orizaephilus surinamenisis. The results revealed that, using the recommended dose of 100%, mineral NPK showed the greatest mean values of plant height, chlorophyll content, yield, its components, and protein (%). By feeding the soil with SiO₂-NPs up to 10 g/kg, the best growth and yield enhancement of maize crop is noticed. Mineral NPK interacted with SiO₂-NPs, whereas the application of mineral NPK at the rate of 50% with 10 g/kg SiO₂-NPs, increased the highest mean values of agronomic characters. Therefore, SiO₂-NPs can be applied as a growth promoter, and in the meantime, as strong unconventional pesticides for crops during storage, with a very small and safe dose.

Wound healing of nanofiber comprising Polygalacturonic/Hyaluronic acid embedded silver nanoparticles: In-vitro and in-vivo studies

The current study is pertaining to develop a novel wound dressing, comprising natural biologically absorbable materials for wound healing In-vivo. Wound dressing is composed of Polygalacturonic acid, Hyaluronic acid embedded silver nanoparticles, which is further fabricated to form nanofibrous mat, using electrospinning. Silver nanoparticles was prepared using PGA. AgNPs in this formula will serve as an antioxidant and anti-inflammatory that protect cells from destructive effect of elevated ROS and accelerate wound healing. The physical performance and water contact angle for nanofiber was evaluated. The produced nanofiber was characterized by Fourier-transform infrared (FTIR), scanning electron microscopy and thermal analysis. Also, the embedded AgNPs was also characterized by UV-vis spectroscopy and TEM. The nanofiber mates embedded AgNPs was applied to the wounded site of albino rats in-vivo. Histopathological assessment for the wound was fully performed. Also, the antimicrobial activity for the fabricated wound dressing was evaluated against gram+ve and gram -ve bacteria.

Dual pH/thermal-dependent coloring polymeric dye through Mannich reaction of chitosan: Synthesis and characterization

A novel polymeric dye was synthesized by one-pot Mannich reaction of chitosan (CS) and phenolphthalein (PHP). The grafting onto side chain of CS derivatives was confirmed by UV-vis, FT-IR, ¹H NMR techniques. The degree of substitution (DS) calculated by ¹H NMR and elemental analysis was revealed to increase with increasing mole ratio of formaldehyde and PHP. XRD analysis showed that the grafting through Mannich reaction was caused to amorphous structure in the derivatives. Covalent grafting of PHP onto CS made the grafted products showing pink color in basic conditions without leaching of dye and color fading after several weeks. Moreover, the derivatives dissolved in LiOH/urea systems could showed darker pink after heating. The results suggested that the novel CS derivatives with dual pH/thermal-dependent coloring property could potentially be prepared as pH/thermal-responsive biomaterial in a wide range of applications.

Thiolated chitosan-lauric acid as a new chitosan derivative: Synthesis, characterization and cytotoxicity

Chitosan as a biopolymer is an attractive vehicle for biomedical applications due to its unique characteristics. In order to improve chitosan's physicochemical features, chemical modification has been carried out to make it more suitable for such approaches. The aim of this study was to prepare and evaluate thiolated chitosan-lauric acid as a new chitosan derivative for biomedical use. Lauric acid was introduced to chitosan via stable amide bond between carboxylic acid group of fatty acid and the amine in the chitosan and thiolation was carried out using thioglycolic acid. Resulted polymers were characterized by FTIR, ¹H NMR and TGA. Moreover, cell viability assessment of new derivative was performed using MTT method. FTIR and ¹H NMR results showed that both substitution reactions were successfully completed. Furthermore, new synthesized polymer had no significant cytotoxicity against normal gingiva human cells (HGF1-PI 1).These findings confirm that this new derivative can be introduced as a suitable polymer for biomedical purposes such as mucosal drug delivery.

Preparation of chitin-amphipathic anion/quaternary ammonium salt ecofriendly dressing and its effect on wound healing in mice

Objective

This study aimed to prepare an eco-friendly dressing using a chitin-derived membrane with amphipathic anion/quaternary ammonium salt designed for antibacterial purposes.

Methods

Four dressings were prepared and group A was chitin, group B was chitin + amphiphilic ion, group C was chitin + quaternary ammonium salt, group D was chitin + amphiphilic ion + quaternary ammonium salt.

Results

In the group D material, precipitation of adherent composite ions was observed. The contact angle test showed that the material was hydrophilic. The drug loading rate in groups B, C, and D was 40-50 (ug:mg), the entrapment efficiency was 70%-75% (P>0.05), and the cumulative release percentages were 87.3%, 88.7%, and 90.2% after 72h for group B, C, and D, respectively. The anti-bacterial activity in vitro was in the order D>C>B>A> control (P>0.05). The anti-pollution activity in vitro was in the order D>B>C>A (P<0.05). The cell proliferation inhibition test showed slight proliferation inhibition (P<0.05) only on the seventh day for group D. Seven days after injury, the wound healing rate was in the order D>C> commercial chitin dressing >B>A> control (P<0.05), and the length of the neonatal epithelium also showed the same trend. Additionally, PCNA and CD31 expression indicated that cell proliferation and angiogenesis were enhanced when skin defects were covered with the D group material (P<0.05).

Conclusion

chitin-amphiphilic ion/quaternary ammonium salt dressing was successfully prepared. The antibacterial and antipollution effects of the prepared material (group D) were both very good, acting to promote wound healing.

Synthesis and in vitro antimicrobial and antioxidant activities of quaternary ammonium chitosan modified with nisin

Nisin had been grafted onto quaternary ammonium chitosan (QCS) through an enzyme-catalyzed reaction to enhance its limited antimicrobial activity. QCS was synthesized by incorporating N-(3-chloro-2-hydroxypropyl) trimethyl ammonium chloride (CHPTAC) onto chitosan's primary amine group. The modification had been confirmed by FT-IR and ¹H NMR spectroscopy. Degree of substitution (DS) of QCS-nisin could be controlled by adjusting the reaction conditions. The synthesized compounds were screened in vitro to evaluate their antimicrobial and antioxidant activities. The results suggested that QCS-nisin significantly suppressed the growth of both gram-positive bacteria and gram-negative bacteria; The antioxidant effects on 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical, hydroxyl radical and hydrogen peroxide (H₂O₂) proved to be enhanced with increasing DS and concentration. In addition, QCS-nisin showed excellent moisture absorption and retention properties; MTT assay exhibited that QCS-nisin revealed low cytotoxicity effects on cultured NIH-3T3 fibroblasts. These results suggest that QCS-nisin would appear to be a promising candidate for wound dressing application.

Regioselective chitosan end-group activation: the triskelion approach

Non-reactive chitosan extremities are regioselectively activated with a trivalent linker, called triskelion, allowing subsequent end-group functionalization with any thiol-reactive species.

Heparin binding chitosan derivatives for production of pro-angiogenic hydrogels for promoting tissue healing

Our aim was to develop a biocompatible hydrogel that could be soaked in heparin and placed on wound beds to improve the vasculature of poorly vascularized wound beds. In the current study, a methodology was developed for the synthesis of a new chitosan derivative (CSD-1). Hydrogels were synthesized by blending CSD-1 for either 4 or 24h with polyvinyl alcohol (PVA). The physical/chemical interactions and the presence of specific functional groups were confirmed by Fourier transform infrared (FT-IR) spectroscopy and proton nuclear magnetic resonance (¹H NMR). The porous nature of the hydrogels was confirmed by scanning electron microscopy (SEM). Thermal gravimetric analysis (TGA) showed that these hydrogels have good thermal stability which was slightly increased as the blending time was increased. Hydrogels produced with 24h of blending supported cell attachment more and could be loaded with heparin to induce new blood vessel formation in a chick chorionic allantoic membrane assay.

Thiolated methylated dimethylaminobenzyl chitosan: A novel chitosan derivative as a potential delivery vehicle

Chitosan is a natural mucoadhesive, biodegradable, biocompatible and nontoxic polymer which has been used in pharmaceutical industry for a lot of purposes such as dissolution enhancing, absorption enhancing, sustained releasing and protein, gene or drug delivery. Two major disadvantages of chitosan are poor solubility in physiological pH and low efficiency for protein and gene delivery. In this study thiolated methylated N-(4-N,N-dimethylaminobenzyl) chitosan was prepared for the first time in order to improve the solubility and delivery properties of chitosan. This novel chitosan derivative was characterized using ¹H NMR, Ellman test, TGA and Zetasizer. Cell toxicity studies were performed on Human Embryonic Kidney 293 (Hek293) cell line using XTT method, to investigate the potential effect of this new derivative on cell viability. ¹H NMR results showed that all substitution reactions were successfully carried out. Zeta potential of new derivative at acidic and physiological pHs was greater than chitosan and it revealed an increase in solubility of the derivative. Furthermore, it had no significant cytotoxicity against Hek293 cell line in comparison to chitosan. These findings confirm that this new derivative can be introduced as a suitable compound for biomedical purposes.

Regioselective thioacetylation of chitosan end-groups for nanoparticle gene delivery systems

Chitosan (CS) end-group chemistry is a conjugation strategy that has been minimally exploited in the literature to date. Although the open-chain form of the CS reducing extremity bears a reactive aldehyde moiety, the most common method to generate a reactive end-group on CS is nitrous acid depolymerization, which produces a 2,5-anhydro-d-mannose unit (M-Unit) bearing also an aldehyde moiety. However, the availability of the latter might be low, since previous literature suggests that its hydrated and non-reactive form, namely the gem-diol form, is predominant in acidic aqueous conditions. Oxime-click chemistry has been used to react on such aldehydes with various degrees of success, but the use of a co-solvent and additional chemical reagents remain necessary to obtain the desired and stable covalent linkage. In this study, we have assessed the availability of the aldehyde reactive form on chitosan treated with nitrous acid. We have also assessed its reactivity towards thiol-bearing molecules in acidic conditions where CS amino groups are fully protonated and thus unreactive towards aldehyde. LC-MS and NMR spectroscopy methods (1H and DOSY, respectively) confirmed the regioselective thioacetylation of the reactive aldehyde with conversion rates between 55 and 70% depending on the thiol molecule engaged. The stabilization of the hemithioacetal intermediates into the corresponding thioacetals was also found to be facilitated upon freeze-drying of the reaction medium. The PEGylation of the CS M-Unit aldehyde by thioacetylation was also performed as a direct application of the proposed conjugation approach. CS-b-PEG2 block copolymers were successfully synthesized and were used to prepare block ionomer complexes with plasmid DNA, as revealed by their spherical morphology vs. the rod-like/globular/toroidal morphology observed for polyplexes prepared using native unmodified chitosan. This novel aqueous thiol-based conjugation strategy constitutes an alternative to the oxime-click pathway; it could be applicable to other polymers.

Chitin and chitosan from Brazilian Atlantic Coast: Isolation, characterization and antibacterial activity

Chitin and chitosan were obtained by chemical treatments of shrimp shells. Different particle sizes (50-1000 μm) of the raw material were used to study their effect on size distribution, demineralization, deproteinization and deacetylation of chitin and chitosan isolation process. The particle size in the range of 800-1000 μm was selected to isolate chitin, which was achieved by measuring nitrogen, protein, ash, and yield %. Hydrochloric acid (5%, v/v) was optimized in demineralization step to remove the minerals from the starting material. Aqueous solution of sodium hydroxide (5%, w/v) at 90 °C for (20 h) was used in deproteinization step to remove the protein. Pure chitin was consequently impregnated into high concentration of sodium hydroxide (50%) for 3.5 h at 90 °C to remove the acetyl groups in order to form high pure chitosan. The degree of deacetylation (DDA) of chitosan was controlled and evaluated by different analytical tools. The chemical structure of chitin and chitosan was confirmed by elemental analysis, ATR-FTIR, H/C NMR, XRD, SEM, UV-Vis spectroscopy, TGA, and acid-base titration. The isolated chitin and chitosan from shrimp shell showed excellent antibacterial activity against Gram (-ve) bacteria (Escherichia coli) comparing with commercial biopolymers.

Isolation of chitosan from Ganoderma lucidum mushroom for biomedical applications

Chitin biopolymer production and its by-product chitosan show great potential. These biomaterials have great applicability in various fields because they are non-toxic, biodegradable, biocompatible, and have antimicrobial effects. The most common source of chitin and chitosan is the crustaceous shell; however, mushrooms are an alternative source for isolating these biopolymers because their cellular wall has a high content of chitin, which may be transformed into chitosan through a deacetylation reaction. The main objective of this research was to obtain chitosan through the deacetylation of chitin isolated from the Ganoderma lucidum basidiomycetes mushroom, which is obtained through biotechnological culture. The material characterization was performed using X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, and an evaluation of cytotoxicity comparing the results obtained with results for commercial chitosan. Protocol results showed that chitosan obtained from this mushroom had a significant similitude with commercial chitosan, yet the one obtained using P2 protocol was the one that rendered the best results: including diffractogram peaks, characteristic infrared analysis bands, and an 80.29 % degree of deacetylation. Cytotoxicity in vitro testing showed that the material was non-toxic; furthermore, it rendered very promising information regarding the evaluation of future applications of this biomaterial in the field of biomedicine.