Isolation and processing of silk proteins for biomedical applications

Silk Sericin and Its Effect on Skin Wound Healing: A State of the Art

Despite the significant progress in wound healing, chronic skin wounds remain a challenge for today's medicine. Due to the growing popularity of natural materials, silk protein-based dressings are gaining more attention in this field. Most studies refer to silk fibroin because sericin has been considered a waste product for years. However, sericin is also worth noting. Sericin-based dressings are mainly studied in cell cultures or animals. Sericin is the dressings' main component or can be included in more complex, advanced biomaterials. Recent studies highlight sericin's important role, noting its biocompatibility, biodegradability, and beneficial effects in skin wound healing, such as antibacterial activity, antioxidant and anti-inflammatory effects, or angiogenic properties. Developing sericin-based biomaterials is often simple, free of toxic by-products, and inexpensive, requiring no highly sophisticated apparatus. As a result, sericin-based dressings can be widely used in wound healing and have low environmental impact. However, the literature in this area is further limited. The following review collects and describes recent studies showing silk sericin's influence on skin wound healing.

Expanding the boundaries of silk sericin biomaterials in biomedical applications

Silk sericin (SS) has a long history as a by-product of the textile industry. SS has emerged as a sustainable material for biomedical engineering due to its material properties including water solubility, diverse impact on biological activities including antibacterial and antioxidant properties, and ability to promote cell adhesion and proliferation. This review addresses the origin, structure, properties, extraction, and underlying functions of this protein. An overview of the growing research studies and market evolution is presented, along with highlights of the most common fabrication matrices (hydrogels, bioinks, porous and fibrous scaffolds) and tissue engineering applications. Finally, the future trends with this protein as a multifaceted toolbox for bioengineering are explored, along with the challenges with SS. Overall, the present review can serve as a foundation for the creation of innovative biomaterials utilizing SS as a fundamental building block that hold market potential.

Sustainable Bombyx mori's silk fibroin for biomedical applications as a molecular biotechnology challenge: A review

Silk is a natural engineering material with a unique set of properties. The major constituent of silk is fibroin, a protein widely used in the biomedical field because of its mechanical strength, toughness and elasticity, as well as its biocompatibility and biodegradability. The domestication of silkworms allows large amounts of fibroin to be extracted inexpensively from silk cocoons. However, the industrial extraction process has drawbacks in terms of sustainability and the quality of the final medical product. The heterologous production of fibroin using recombinant DNA technology is a promising approach to address these issues, but the production of such recombinant proteins is challenging and further optimization is required due to the large size and repetitive structure of fibroin's DNA and amino acid sequence. In this review, we describe the structure-function relationship of fibroin, the current extraction process, and some insights into the sustainability of silk production for biomedical applications. We focus on recent advances in molecular biotechnology underpinning the production of recombinant fibroin, working toward a standardized, successful and sustainable process.

Applications and Potentials of a Silk Fibroin Nanoparticle Delivery System in Animal Husbandry

Silk fibroin (SF), a unique natural polymeric fibrous protein extracted from Bombyx mori cocoons, accounts for approximately 75% of the total mass of silk. It has great application prospects due to its outstanding biocompatibility, biodegradability, low immunogenicity, and mechanical stability. Additionally, it is non-toxic and environmentally friendly. Nanoparticle delivery systems constructed with SF can improve the bioavailability of the carriers, increase the loading rates, control the release behavior of the deliverables, and enhance their action efficiencies. Animal husbandry is an integral part of agriculture and plays a vital role in the development of the rural economy. However, the pillar industry experiences a lot of difficulties, like drug abuse while treating major animal diseases, and serious environmental pollution, restricting sustainable development. Interestingly, the limited use cases of silk fibroin nanoparticle (SF NP) delivery systems in animal husbandry, such as veterinary vaccines and feed additives, have shown great promise. This paper first reviews the SF NP delivery system with regard to its advantages, disadvantages, and applications. Moreover, we describe the application status and developmental prospects of SF NP delivery systems to provide theoretical references for further development in livestock production and promote the high-quality and healthy development of animal husbandry.

Advances of regenerated and functionalized silk biomaterials and application in skin wound healing

The cocoon silk of silkworms (Bombyx mori) has multiple potential applications in biomedicine due to its good biocompatibility, mechanical properties, degradability, and plasticity. Numerous studies have confirmed that silk material dressings are more effective than traditional ones in the skin wound healing process. Silk material research has recently moved toward functionalized biomaterials and achieved remarkable results. Herein, we summarize the recent advances in functionalized silk materials and their efficacy in skin wound healing. In particular, transgenic technology has realized the specific expression of human growth factors in the silk glands of the silkworms, which lays the foundation for fabricating novel and low-cost functionalized materials. Without a green and safe preparation process, the best raw silk materials cannot be made into medically safe products. Therefore, we provide an overview of green and gentle approaches for silk degumming and silk sericin (SS) extraction. Moreover, we summarize and discuss the processing methods of silk fibroin (SF) and SS materials and their potential applications, such as burns, diabetic wounds, and other wounds. This review aims to enhance our understanding of new advances and directions in silk materials and guide future biomedical research.

Advances in Preparation and Properties of Regenerated Silk Fibroin

Over the years, silk fibroin (SF) has gained significant attention in various fields, such as biomedicine, tissue engineering, food processing, photochemistry, and biosensing, owing to its remarkable biocompatibility, machinability, and chemical modifiability. The process of obtaining regenerated silk fibroin (RSF) involves degumming, dissolving, dialysis, and centrifugation. RSF can be further fabricated into films, sponges, microspheres, gels, nanofibers, and other forms. It is now understood that the dissolution method selected greatly impacts the molecular weight distribution and structure of RSF, consequently influencing its subsequent processing and application. This study comprehensively explores and summarizes different dissolution methods of SF while examining their effects on the structure and performance of RSF. The findings presented herein aim to provide valuable insights and references for researchers and practitioners interested in utilizing RSF in diverse fields.

Development of a More Environmentally Friendly Silk Fibroin Scaffold for Soft Tissue Applications

A push for environmentally friendly approaches to biomaterials fabrication has emerged from growing conservational concerns in recent years. Different stages in silk fibroin scaffold production, including sodium carbonate (Na₂CO₃)-based degumming and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP)-based fabrication, have drawn attention for their associated environmental concerns. Environmentally friendly alternatives have been proposed for each processing stage; however, an integrated green fibroin scaffold approach has not been characterized or used for soft tissue applications. Here, we show that the combination of sodium hydroxide (NaOH) as a substitute degumming agent with the popular "aqueous-based" alternative silk fibroin gelation method yields fibroin scaffolds with comparable properties to traditional Na₂CO₃-degummed aqueous-based scaffolds. The more environmentally friendly scaffolds were found to have comparable protein structure, morphology, compressive modulus, and degradation kinetics, with increased porosity and cell seeding density relative to traditional scaffolds. Human adipose-derived stem cells showed high viability after three days of culture while seeded in each scaffold type, with uniform cell attachment to pore walls. Adipocytes from human whole adipose tissue seeded into scaffolds were found to have similar levels of lipolytic and metabolic function between conditions, in addition to a healthy unilocular morphology. Results indicate that our more environmentally friendly methodology for silk scaffold production is a viable alternative and well suited to soft tissue applications.

Amino Acid Substitutions at P1 Position Change the Inhibitory Activity and Specificity of Protease Inhibitors BmSPI38 and BmSPI39 from Bombyx mori

It was found that silkworm serine protease inhibitors BmSPI38 and BmSPI39 were very different from typical TIL-type protease inhibitors in sequence, structure, and activity. BmSPI38 and BmSPI39 with unique structure and activity may be good models for studying the relationship between the structure and function of small-molecule TIL-type protease inhibitors. In this study, site-directed saturation mutagenesis at the P1 position was conducted to investigate the effect of P1 sites on the inhibitory activity and specificity of BmSPI38 and BmSPI39. In-gel activity staining and protease inhibition experiments confirmed that BmSPI38 and BmSPI39 could strongly inhibit elastase activity. Almost all mutant proteins of BmSPI38 and BmSPI39 retained the inhibitory activities against subtilisin and elastase, but the replacement of P1 residues greatly affected their intrinsic inhibitory activities. Overall, the substitution of Gly54 in BmSPI38 and Ala56 in BmSPI39 with Gln, Ser, or Thr was able to significantly enhance their inhibitory activities against subtilisin and elastase. However, replacing P1 residues in BmSPI38 and BmSPI39 with Ile, Trp, Pro, or Val could seriously weaken their inhibitory activity against subtilisin and elastase. The replacement of P1 residues with Arg or Lys not only reduced the intrinsic activities of BmSPI38 and BmSPI39, but also resulted in the acquisition of stronger trypsin inhibitory activities and weaker chymotrypsin inhibitory activities. The activity staining results showed that BmSPI38(G54K), BmSPI39(A56R), and BmSPI39(A56K) had extremely high acid-base and thermal stability. In conclusion, this study not only confirmed that BmSPI38 and BmSPI39 had strong elastase inhibitory activity, but also confirmed that P1 residue replacement could change their activity and inhibitory specificity. This not only provides a new perspective and idea for the exploitation and utilization of BmSPI38 and BmSPI39 in biomedicine and pest control, but also provides a basis or reference for the activity and specificity modification of TIL-type protease inhibitors.

Ancient fibrous biomaterials from silkworm protein fibroin and spider silk blends: Biomechanical patterns

Silkworm silk protein fibroin and spider silk spidroin are known biocompatible and natural biodegradable polymers in biomedical applications. The presence of β-sheets in silk fibroin and spider spidroin conformation improves their mechanical properties. The strength and toughness of pure recombinant silkworm fibroin and spidroin are relatively low due to reduced molecular weight. Hence, blending is the foremost approach of recent studies to optimize silk fibroin and spidroin's mechanical properties. As summarised in the present review, numerous research investigations evaluate the blending of natural and synthetic polymers. The effects of blending silk fibroin and spidroin with natural and synthetic polymers on the mechanical properties are discussed in this review article. Indeed, combining natural and synthetic polymers with silk fibroin and spidroin changes their conformation and structure, fine-tuning the blends' mechanical properties. STATEMENT OF SIGNIFICANCE: Silkworm and spider silk proteins (silk fibroin and spidroin) are biocompatible and biodegradable natural polymers having different types of biomedical applications. Their mechanical and biological properties may be tuned through various strategies such as blending, conjugating and cross-linking. Blending is the most common method to modify fibroin and spidroin properties on demand, this review article aims to categorize and evaluate the effects of blending fibroin and spidroin with different natural and synthetic polymers. Increased polarity and hydrophilicity end to hydrogen bonding triggered conformational change in fibroin and spidroin blends. The effect of polarity and hydrophilicity of the blending compound is discussed and categorized to a combinatorial, synergistic and indirect impacts. This outlook guides us to choose the blending compounds mindfully as this mixing affects the biochemical and biophysical characteristics of the biomaterials.

Silk sericin-based materials for biomedical applications

Silk sericin, a natural protein extracted from silkworm cocoons, has been extensively studied and utilized in the biomedical field because of its superior biological activities and controllable chemical-physical properties. Sericin is biocompatible and naturally cell adhesive, enabling cell attachment, proliferation, and differentiation in sericin-based materials. Moreover, its abundant functional groups from variable amino acids composition allow sericin to be chemically modified and cross-linked to form versatile constructs serving as alternative matrixes for biomedical applications. Recently, sericin has been constructed into various types of biomaterials for tissue engineering and regenerative medicine, including various bulk constructions (films, hydrogels, scaffolds, conduits, and devices) and micro-nano formulations. In this review, we systemically summarize the properties of silk sericin, introduce its different forms, and demonstrate their newly-developed as well as potential biomedical applications.

Protein by-products: Composition, extraction, and biomedical applications

Significant upsurge in animal by-products such as skin, bones, wool, hides, feathers, and fats has become a global challenge and, if not properly disposed of, can spread contamination and viral diseases. Animal by-products are rich in proteins, which can be used as nutritional, pharmacologically functional ingredients, and biomedical materials. Therefore, recycling these abundant and renewable by-products and extracting high value-added components from them is a sustainable approach to reclaim animal by-products while addressing scarce landfill resources. This article appraises the most recent studies conducted in the last five years on animal-derived proteins' separation and biomedical application. The effort encompasses an introduction about the composition, an overview of the extraction and purification methods, and the broad range of biomedical applications of these ensuing proteins.

Nonmulberry silk proteins: multipurpose ingredient in bio-functional assembly

The emerging field of tissue engineering and regenerative medicines utilising artificial polymers is facing many problems. Despite having mechanical stability, non-toxicity and biodegradability, most of them lack cytocompatibility and biocompatibility. Natural polymers (such as collagen, hyaluronic acid, fibrin, fibroin, and others), including blends, are introduced to the field to solve some of the relevant issues. Another natural biopolymer: silkworm silk gained special attention primarily due to its specific biophysical, biochemical, and material properties, worldwide availability, and cost-effectiveness. Silk proteins, namely fibroin and sericin extracted from domesticated mulberry silkwormBombyx mori, are studied extensively in the last few decades for tissue engineering. Wild nonmulberry silkworm species, originated from India and other parts of the world, also produce silk proteins with variations in their nature and properties. Among the nonmulberry silkworm species,Antheraea mylitta(Indian Tropical Tasar),A. assamensis/A. assama(Indian Muga), andSamia ricini/Philosamia ricini(Indian Eri), along withA. pernyi(Chinese temperate Oak Tasar/Tussah) andA. yamamai(Japanese Oak Tasar) exhibit inherent tripeptide motifs of arginyl glycyl aspartic acid in their fibroin amino acid sequences, which support their candidacy as the potential biomaterials. Similarly, sericin isolated from such wild species delivers unique properties and is used as anti-apoptotic and growth-inducing factors in regenerative medicines. Other characteristics such as biodegradability, biocompatibility, and non-inflammatory nature make it suitable for tissue engineering and regenerative medicine based applications. A diverse range of matrices, including but not limited to nano-micro scale structures, nanofibres, thin films, hydrogels, and porous scaffolds, are prepared from the silk proteins (fibroins and sericins) for biomedical and tissue engineering research. This review aims to represent the progress made in medical and non-medical applications in the last couple of years and depict the present status of the investigations on Indian nonmulberry silk-based matrices as a particular reference due to its remarkable potentiality of regeneration of different types of tissues. It also discusses the future perspective in tissue engineering and regenerative medicines in the context of developing cutting-edge techniques such as 3D printing/bioprinting, microfluidics, organ-on-a-chip, and other electronics, optical and thermal property-based applications.

Silk Fibroin as a Green Material

Silk fibroin has been explored as a suitable biomaterial due to its biocompatibility, tunable degradability, low toxicity, and mechanical properties. To harness silk fibroin's innate properties, it is purified from native silkworm cocoons by removing proteins and debris that have the potential to cause inflammatory responses. Typically, within the purification and fabrication steps, chemical solvents, energy-intensive equipment, and large quantities of water are used to reverse engineer silk fibroin into an aqueous solution and then process into the final material format. Gentler, green methods for extraction and fabrication have been developed that reduce or remove the need for harmful chemical additives and energy-inefficient equipment while still producing mechanically robust biomaterials. This review will focus on the alternative green processing and fabrication methods that have proven useful in creating silk fibroin materials for a range of applications including consumer and medical materials.

Processing, mechanical properties and bio-applications of silk fibroin-based high-strength hydrogels

Hydrogels are an attractive class of materials that possess similar structural and functional characteristics to wet biological tissues and demonstrate a diversity of applications in biomedical engineering. Silk fibroin (SF) is a unique natural polymer due to its fibrous protein nature, versatile formats, biocompatibility, tunable biodegradation and is thus a good hydrogel candidate for bio-applications. Compared to synthetic polymer hydrogels, poor mechanical performance is still a fatal drawback that hinders the application of SF hydrogels as structural materials. Researchers have attempted to develop strategies to construct silk fibroin-based high-strength hydrogels (SF-HSHs). Herein, we firstly provide an overview of the approaches of processing SF-HSHs with a focus on the physical/non-covalent crosslinking mechanisms. The examples of SF-HSHs are discussed in detail under four categories, including physical-crosslinked, dual-crosslinked, double network and composite hydrogels respectively. A brief section follows to elucidate on the gelation mechanisms of SF-HSHs before a description of the utility of SF-HSHs in biomedicine and devices is presented. Finally, the potential challenges and future development of SF-HSHs are briefly discussed. This review aims to enhance our understanding of the structure-mechanical property-function relationships of soft materials made from natural polymers and guide future research of silk fibroin-based hydrogels for biomedical applications. STATEMENT OF SIGNIFICANCE: Silk fibroin (SF) extracted from silk fibres is increasingly applied in the biomedical field, and SF hydrogel has been an emerging area for frontier bio-research. Since SF biopolymer has an intrinsic tendency to form regular β-sheet stacks, it can be processed into purely physically crosslinked hydrogels, thus avoiding the use of chemical crosslinkers. Nevertheless, akin to other natural polymers, lab-produced SF is variable (i.e. the molecular weight and distribution), and the gelation of SF hydrogel is challenging to control. In addition, hydrogels made from SF are usually weak and brittle, which hinders the wide use of this biofriendly and biodegradable hydrogel. Recently, there is a pressing need for high strength hydrogels from natural polymers for biomedical applications, and SF is proposed as a strong candidate. Therefore, we have studied the literature in the past 10 years and would like to focus on the gelation mechanism and mechanical strength of SF hydrogels for the review.

How to Improve Physico-Chemical Properties of Silk Fibroin Materials for Biomedical Applications?-Blending and Cross-Linking of Silk Fibroin-A Review

This review supplies a report on fresh advances in the field of silk fibroin (SF) biopolymer and its blends with biopolymers as new biomaterials. The review also includes a subsection about silk fibroin mixtures with synthetic polymers. Silk fibroin is commonly used to receive biomaterials. However, the materials based on pure polymer present low mechanical parameters, and high enzymatic degradation rate. These properties can be problematic for tissue engineering applications. An increased interest in two- and three-component mixtures and chemically cross-linked materials has been observed due to their improved physico-chemical properties. These materials can be attractive and desirable for both academic, and, industrial attention because they expose improvements in properties required in the biomedical field. The structure, forms, methods of preparation, and some physico-chemical properties of silk fibroin are discussed in this review. Detailed examples are also given from scientific reports and practical experiments. The most common biopolymers: collagen (Coll), chitosan (CTS), alginate (AL), and hyaluronic acid (HA) are discussed as components of silk fibroin-based mixtures. Examples of binary and ternary mixtures, composites with the addition of magnetic particles, hydroxyapatite or titanium dioxide are also included and given. Additionally, the advantages and disadvantages of chemical, physical, and enzymatic cross-linking were demonstrated.

Preparation and Biocompatibility Characterization of Silk Fibroin 3D Scaffolds

In this paper, three different mass fractions of sodium carbonate were used for degumming to obtain different degrees of damaged silk fibroin fibers, which were then treated with formic acid to shrink and bond them into 3D scaffolds. The structure and performance of silk fibroin fibers and silk fibroin 3D scaffolds were characterized by scanning electron microscopy, infrared spectroscopy, X-ray diffraction, a differential thermal scanner, a universal materials testing machine, and laser confocal microscopy, and the degradation performance was tested by protease degradation. The results showed that an excessive mass fraction of sodium carbonate would cause partial hydrolysis of fibroin fibers, decrease the mechanical properties of fibroin fiber, increase the surface roughness of fibroin fibers, and make mouse embryonic fibroblasts easier to adhere and grow. Silk fibroin fibers were slightly dissolved, shrunk, and dispersed in formic acid. The mass fraction of sodium carbonate can adjust the enzymatic degradation rate of the silk fibroin 3D scaffolds. With the extension of the degradation time, minerals will be deposited on the surface of the scaffolds. The results show that the silk fibroin 3D scaffolds have biocompatibility, mechanical properties, and degradability, which provides a good material for a barrier biofilm in the future.

Surface modification of electrospun silk/AMOX/PVA nanofibers by dielectric barrier discharge plasma: physiochemical properties, drug delivery and in-vitro biocompatibility

The naturally obtained protein Bombyxmori silk is a biocompatible polymer with excellent mechanical properties and have the potential in controlled drug delivery applications. In this work, we have demonstrated dielectric barrier discharge (DBD) oxygen (O2) plasma surface modified electrospun Bombyxmori silk/Amoxicillin hydrochloride trihydrate (AMOX)/polyvinyl alcohol (PVA) nanofibers for drug release applications with controlled plasma treatment duration (1-10 min). The findings indicate that plasma treated electrospun nanofibers for 1-3 min exhibited significant enhancement in tensile strength, Young's modulus, wettability and surface energy. The plasma treated electrospun nanofibers for 1-5 min showed remarkable increase in AMOX released rate, whereas the electrospun nanofibers treated with plasma irradiation beyond 5 min showed only marginal increase. Moreover, the plasma treated nanofibers also exhibited good antibacterial activity against both E. coli (gram negative) and S. aureus (gram positive) bacteria. The untreated and the plasma treated silk/AMOX/PVA electrospun nanofibers for 1-3 min showed enhanced viability of primary adipose derived mesenchymal stem cells (ADMSCs) growth on them and much less hemolysis activity (< 5%). The in vitro biocompatibility of various electrospun nanofibers were further corroborated by live/dead imaging and cytoskeletal architecture assessment demonstrating enhanced cell adhesion and spreading on the plasma treated nanofibers for 1-3 min. The findings of the present study suggest that the silk/AMOX/PVA electrospun nanofibers with plasma treatment (1-3 min) due to their enhanced drug release ability and biocompatibility can be used as potential wound dressing applications.

Multi-Responsive Silk Fibroin-Based Nanoparticles for Drug Delivery

Silk fibroin has the merits of biocompatibility, biodegradability, ease of processing, and feasibility of modification, which present it as a promising drug delivery material. This review focuses on the structures of silk fibroin, the controlled transformation of secondary structures, and the formation mechanism of silk fibroin-based nanoparticles (SFNPs). We also discuss the intrinsic multi-responsive, surface functionalization, and transgenic modification of SFNPs for drug delivery.

3D printing with silk: considerations and applications

Silk is a natural polymer sourced mainly from spiders and silkworms. Due to its biocompatibility, biodegradability, and mechanical properties, it has been heavily investigated for biomedical applications. It can be processed into a number of formats, such as scaffolds, films, and nanoparticles. Common methods of production create constructs with limited complexity. 3D printing allows silk to be printed into more intricate designs, increasing its potential applications. Extrusion and inkjet printing are the primary ways silk has been 3D printed, though other methods are beginning to be investigated. Silk has been integrated into bioink with other polymers, both natural and synthetic. The addition of silk is primarily done to offer more desirable viscosity characteristics and mechanical properties for printing. Silk-based bioinks have been used to fabricate medical devices and tissues. This article discusses recent research and printing parameters important for 3D printing with silk.

Silk biomaterials in wound healing and skin regeneration therapeutics: From bench to bedside

Silk biomaterials are known for biomedical and tissue engineering applications including drug delivery and implantable devices owing to their biocompatible and a wide range of ideal physico-chemical properties. Herein, we present a critical overview of the progress of silk-based matrices in skin regeneration therapeutics with an emphasis on recent innovations and scientific findings. Beginning with a brief description of numerous varieties of silks, the review summarizes our current understanding of the biological properties of silk that help in the wound healing process. Various silk varieties such as silkworm silk fibroin, silk sericin, native spider silk and recombinant silk materials have been explored for cutaneous wound healing applications from the past few decades. With an aim to harness the regenerative properties of silk, numerous strategies have been applied to develop functional bioactive wound dressings and viable bio-artificial skin grafts in recent times. The review examines multiple inherent properties of silk that aid in the critical events of the healing process such as cell migration, cell proliferation, angiogenesis, and re-epithelialization. A detailed insight into the progress of silk-based cellular skin grafts is also provided that discusses various co-culture strategies and development of bilayer and tri-layer human skin equivalent under in vitro conditions. In addition, functionalized silk matrices loaded with bioactive molecules and antibacterial compounds are discussed, which have shown great potential in treating hard-to-heal wounds. Finally, clinical studies performed using silk-based translational products are reviewed that validate their regenerative properties and future applications in this area. STATEMENT OF SIGNIFICANCE: The review article discusses the recent advances in silk-based technologies for wound healing applications, covering various types of silk biomaterials and their properties suitable for wound repair and regeneration. The article demonstrates the progress of silk-based matrices with an update on the patented technologies and clinical advancements over the years. The rationale behind this review is to highlight numerous properties of silk biomaterials that aid in all the critical events of the wound healing process towards skin regeneration. Functionalization strategies to fabricate silk dressings containing bioactive molecules and antimicrobial compounds for drug delivery to the wound bed are discussed. In addition, a separate section describes the approaches taken to generate living human skin equivalent that have recently contributed in the field of skin tissue engineering.

Silk fibroin promotes mineralization of gellan gum hydrogels

Mineralization is a natural process leading to the formation of mineralized tissue such as bone. The chief mineral component of bone is hydroxyapatite (HAp), which is deposited using an organic template like fibrillar Collagen I under physiological condition. Fibrous silk fibroin is structurally homologous to collagen and acts as nucleation site for HAp mineralization when immersed in simulated body fluid (SBF) or fetal bovine serum (FBS), therefore, considered as popular bone regeneration biomaterial. Hence, the mineralization behavior of silk fibroin self-assembled gellan gum enriched 3D hydrogels is investigated under conditions closer to physiological ones using SBF as well as FBS, and also in presence of cells (e.g. human adipose tissue-derived stem cells, ASCs). Incorporation of silk fibroin induces the mineralization in acellular spongy-like hydrogels in composition dependent manner, confirmed by SEM-EDS analysis. In contrast, ASCs mediated mineralization is found in all hydrogel compositions of 3 weeks post-culture under osteogenic conditions as demonstrated by gene expression profile and Alizarin Red S staining. This is perhaps due to the co-existence of fibroin and FBS together induce cell-mediated mineralization. The blending of fibroin offers cheap alternative strategy to improve or guide the repair of mineralized tissue using gellan gum-based biomaterials.

Genipin-crosslinked polyvinyl alcohol/silk fibroin/nano-hydroxyapatite hydrogel for fabrication of artificial cornea scaffolds-a novel approach to corneal tissue engineering

Design of artificial corneal scaffolds substitute is crucial for replacement of impaired cornea. In this paper, porous polyvinyl alcohol/silk fibroin/nano-hydroxyapatite (PVA/SF/n-HA) composite hydrogel was prepared via the genipin (GP) cross-linking, the pore diameter of the hydrogel ranged from 8.138 nm and 90.269 nm, and the physical and physiological function of hydrogel were investigated. The resulting hydrogel exhibited favourable physical properties. With the GP content increasing, the structural regularity of PVA/SF/n-HA composite hydrogel was enhanced and the thermal stability was improved. The moisture content was slightly decreased and generally maintained at approximately 70%. The tensile strength was heightened up to 0.64 MPa, while the breaking elongation was decreased slightly. Moreover, the biofunction was investigated. The in vitro degradation test demonstrated that with the addition of GP, the stability of the composite hydrogels in protease XIV solution was promoted and the three-dimensional porosity structure of composite hydrogels was maintained as ever. And the human corneal fibroblasts (HCFs) were employed to examine the cells cytotoxicity of the PVA/SF/n-HA composite hydrogels with different GP content by CCK-8 assay. Based on confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM), HCFs had individually commendable adhesion and proliferation on PVA/n-HA/SF composite hydrogel. HCFs proliferated and grew into the pores of composite hydrogel. The results of biocompatibility experiments of composite hydrogel suggested that it was no acute toxicity, in vitro cytotoxicity was 0 or 1 grade. Overall, results from this paper, PVA/n-HA/SF composite hydrogel was a qualified medical material which conformed to the national standard, could be a promising alternative for artificial cornea scaffold material-a novel approach to corneal tissue engineering.

4-Hexylresorcinol and silk sericin increase the expression of vascular endothelial growth factor via different pathways

Angiogenesis plays an important role in active inflammation and wound healing. Our results showed that silk sericin and 4-hexylresorcinol (4HR) increased vascular endothelial growth factor (VEGF) expression in a dose-dependent manner in RAW264.7 cells. Unlike 4HR, silk sericin increased the expression of hypoxia inducible factor-1α (HIF-1α) and HIF-2α. Pretreatment with an HIF inhibitor decreased the sericin-induced increase in VEGF expression. However, the HIF inhibitor did not affect the 4HR-induced increase in VEGF expression. An inhibitor of matrix metalloproteinase (MMP) declined the 4HR-induced increase in VEGF expression. Silk sericin increased production of reactive oxygen species (ROS), whereas 4HR decreased ROS. M1 markers were increased by silk sericin treatment, and M2 markers were increased by 4HR treatment. VEGF and angiogenin expression were higher in rats treated with a 4HR-incorporated silk mat than in rats treated with a silk mat alone. In conclusion, silk sericin and 4HR increased VEGF expression in RAW264.7 cells via HIF-mediated and MMP-mediated pathways, respectively. Silk sericin exerted like pro-oxidant effects and 4HR exerted anti-oxidant effects. Rats treated with a 4HR-incorporated silk mat showed higher levels of VEGF and angiogenin than those treated with a silk mat alone.

Simultaneous structuring and mineralization of silk fibroin scaffolds

Silk fibroin is commonly used as scaffold material for tissue engineering applications. In combination with a mineralization with different calcium phosphate phases, it can also be applied as material for bone regeneration. Here, we present a study which was performed to produce mineralized silk fibroin scaffolds with controlled macroporosity. In contrast to former studies, our approach focused on a simultaneous gelation and mineralization of silk fibroin by immersion of frozen silk fibroin monoliths in acidic calcium phosphate solutions. This was achieved by thawing frozen silk fibroin monoliths in acidic calcium phosphate solution, leading to the precipitation of monocalcium phosphate within the silk fibroin matrix. In the second approach, a conversion of incorporated β-tricalcium phosphate particles into brushite was successfully achieved. Furthermore, a controlled cryostructuring process of silk fibroin scaffolds was carried out leading to the formation of parallel-oriented pores with diameters of 30–50 µm.

Burn injury: Challenges and advances in burn wound healing, infection, pain and scarring

Severe burn injuries are the most traumatic and physically debilitating injuries affecting nearly every organ system and leading to significant morbidity and mortality. Early burn wound excision and skin grafting are common clinical practices that have significantly improved the outcomes for severe burn injured patients by reducing mortality rate and days of hospital stay. However, slow wound healing, infection, pain, and hypertrophic scarring continue to remain a major challenge in burn research and management. In the present article, we review and discuss issues in the current treatment of burn injuries; the advances and novel strategies developed in the past decade that have improved burn management; and also, pioneer ideas and studies in burn research which aims to enhance burn wound care with a focus on burn wound infection, pain management, treatments for scarring and skin tissue engineering.

Injectable silk fibroin hydrogels functionalized with microspheres as adult stem cells-carrier systems

Hydrogels are good candidate materials for cell delivery scaffolds because they can mimic the physical, chemical, electrical and biological properties of most of the native tissues. In this study, composite biosynthetic hydrogels were produced by combining the bio-functionality of silk fibroin (SF) with the structural versatility of polyethylene-glycol-diacrylated (PEGDa). The formation of a photopolymerizable PEGDa-SF hydrogel (PSFHy) was optimized for 3D-cell culture. Functionalization of the 3D-PSFHy with protein microspheres (MS) was required to increase the porosity and cell-adhesive properties of the material. Cardiac mesenchymal stem cells, which were cultured within the MS-embedding PSFHy, exhibited good viability and expression of proteins that are characteristic of the initial phases of the cardiac muscle differentiation process. Further, the addition of chondroitin sulfate into the scaffolds improved the cell viability. A cell-preconditioning of the scaffold was also performed, suggesting a potential application of these sponge-like scaffolds for analysing the effects of several extracellular microenvironments, produced by different kinds of cells, on the stem cells fate. The results presented herein highlight on the possibility to use the PSFHys functionalized with MS as stem cell-carrier systems with sponge-like properties, potential ultrasound-imaging contrast agents and controlled biochemical factor delivery.

Deproteinised natural rubber latex grafted poly(dimethylaminoethyl methacrylate) - poly(vinyl alcohol) blend membranes: Synthesis, properties and application

Natural rubber latex was initially deproteinised (DNRL) and then subjected to physicochemical modifications to make high functional membranes for drug delivery applications. Initially, DNRL was prepared by incubating with urea, sodiumdodecylsulphate and acetone followed by centrifugation. The deproteinisation was confirmed by CHN analysis. The DNRL was then chemically modified by grafting (dimethylaminoethyl methacrylate) onto NR particles by using a redox initiator system viz; cumene hydroperoxide/tetraethylenepentamine, followed by dialysis for purification. The grafting was confirmed by dynamic light scattering, Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. The grafted system was blended with a hydrophilic adhesive polymer PVA and casted into membranes. The membranes after blending showed enhanced mechanical properties with a threshold concentration of PVA. The moisture uptake, swelling and water contact angle experiments indicated an increased hydrophilicity with an increased PVA content in the blend membranes. The grafted DNRL possessed significant antibacterial property which has been found to be retained in the blended form. A notable decrease in cytotoxicity was observed for the modified DNRL membranes than the bare DNRL membranes. The in-vitro drug release studies using rhodamine B as a model drug, confirmed the utility of the prepared membranes to function as a drug delivery matrix.

Biocompatible Silk/Polymer Energy Harvesters Using Stretched Poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) Nanofibers

Energy harvested from human body movement can produce continuous, stable energy to portable electronics and implanted medical devices. The energy harvesters need to be light, small, inexpensive, and highly portable. Here we report a novel biocompatible device made of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofibers on flexible substrates. The nanofibers are prepared with electrospinning followed by a stretching process. This results in aligned nanofibers with diameter control. The assembled device demonstrates high mechanical-to-electrical conversion performance, with stretched PVDF-HFP nanofibers outperforming regular electrospun samples by more than 10 times. Fourier transform infrared spectroscopy (FTIR) reveals that the stretched nanofibers have a higher β phase content, which is the critical polymorph that enables piezoelectricity in polyvinylidene fluoride (PVDF). Polydimethylsiloxane (PDMS) is initially selected as the substrate material for its low cost, high flexibility, and rapid prototyping capability. Bombyx Mori silkworm silk fibroin (SF) and its composites are investigated as promising alternatives due to their high strength, toughness, and biocompatibility. A composite of silk with 20% glycerol demonstrates higher strength and larger ultimate strain than PDMS. With the integration of stretched electrospun PVDF-HFP nanofibers and flexible substrates, this pilot study shows a new pathway for the fabrication of biocompatible, skin-mountable energy devices.

Biodegradable polymer scaffolds

Tissue engineering aims to repair the damaged tissue by transplantation of cells or introducing bioactive factors in a biocompatible scaffold. In recent years, biodegradable polymer scaffolds mimicking the extracellular matrix have been developed to promote the cell proliferation and extracellular matrix deposition. The biodegradable polymer scaffolds thus act as templates for tissue repair and regeneration. This article reviews the updated information regarding various types of natural and synthetic biodegradable polymers as well as their functions, physico-chemical properties, and degradation mechanisms in the development of biodegradable scaffolds for tissue engineering applications, including their combination with 3D printing.

Biomimetic Designing of Functional Silk Nanotopography Using Self-assembly

In nature inorganic-organic building units create multifunctional hierarchical architectures. Organic silk protein is particularly attractive in this respect because of its micro-nanoscale structural blocks that are attributed to sophisticated hierarchical assembly imparting flexibility and compressibility to designed biohybrid materials. In the present study, aqueous silk fibroin is assembled to form nano/microtopography on inorganic silica surface via a facile diffusion-limited aggregation process. This process is driven by electrostatic interaction and only possible at a specified aminated surface chemistry. The self-assembled topography depends on the age and concentration of protein solution as well as on the surface charge distribution of the template. The self-assembled silk trails closely resemble natural cypress leaf architecture, which is considered a structural analogue of neuronal cortex. This assembled surface significantly enhances anchorage of neuronal cell and cytoskeletal extensions, providing an effective nano/microtopographical cue for cellular recognition and guidance.

Tissue Regeneration: A Silk Road

Silk proteins are natural biopolymers that have extensive structural possibilities for chemical and mechanical modifications to facilitate novel properties, functions, and applications in the biomedical field. The versatile processability of silk fibroins (SF) into different forms such as gels, films, foams, membranes, scaffolds, and nanofibers makes it appealing in a variety of applications that require mechanically superior, biocompatible, biodegradable, and functionalizable biomaterials. There is no doubt that nature is the world's best biological engineer, with simple, exquisite but powerful designs that have inspired novel technologies. By understanding the surface interaction of silk materials with living cells, unique characteristics can be implemented through structural modifications, such as controllable wettability, high-strength adhesiveness, and reflectivity properties, suggesting its potential suitability for surgical, optical, and other biomedical applications. All of the interesting features of SF, such as tunable biodegradation, anti-bacterial properties, and mechanical properties combined with potential self-healing modifications, make it ideal for future tissue engineering applications. In this review, we first demonstrate the current understanding of the structures and mechanical properties of SF and the various functionalizations of SF matrices through chemical and physical manipulations. Then the diverse applications of SF architectures and scaffolds for different regenerative medicine will be discussed in detail, including their current applications in bone, eye, nerve, skin, tendon, ligament, and cartilage regeneration.

Non-Mulberry and Mulberry Silk Protein Sericins as Potential Media Supplement for Animal Cell Culture

Silk protein sericins, in the recent years, find application in cosmetics and pharmaceuticals and as biomaterials. We investigate the potential of sericin, extracted from both mulberry Bombyx mori and different non-mulberry sources, namely, tropical tasar, Antheraea mylitta; muga, Antheraea assama; and eri, Samia ricini, as growth supplement in serum-free culture medium. Sericin supplemented media containing different concentrations of sericins from the different species are examined for attachment, growth, proliferation, and morphology of fibrosarcoma cells. The optimum sericin supplementation seems to vary with the source of sericins. The results indicate that all the sericins promote the growth of L929 cells in serum-free culture media; however, S. ricini sericin seems to promote better growth of cells amongst other non-mulberry sericins.

Silk protein-based hydrogels: Promising advanced materials for biomedical applications

Hydrogels are a class of advanced material forms that closely mimic properties of the soft biological tissues. Several polymers have been explored for preparing hydrogels with structural and functional features resembling that of the extracellular matrix. Favourable material properties, biocompatibility and easy processing of silk protein fibers into several forms make it a suitable material for biomedical applications. Hydrogels made from silk proteins have shown a potential in overcoming limitations of hydrogels prepared from conventional polymers. A great deal of effort has been made to control the properties and to integrate novel topographical and functional characteristics in the hydrogel composed from silk proteins. This review provides overview of the advances in silk protein-based hydrogels with a primary emphasis on hydrogels of fibroin. It describes the approaches used to fabricate fibroin hydrogels. Attempts to improve the existing properties or to incorporate new features in the hydrogels by making composites and by improving fibroin properties by genetic engineering approaches are also described. Applications of the fibroin hydrogels in the realms of tissue engineering and controlled release are reviewed and their future potentials are discussed.

STATEMENT OF SIGNIFICANCE

This review describes the potentiality of silk fibroin hydrogel. Silk Fibroin has been widely recognized as an interesting biomaterial. Due to its properties including high mechanical strength and excellent biocompatibility, it has gained wide attention. Several groups are exploring silk-based materials including films, hydrogels, nanofibers and nanoparticles for different biomedical applications. Although there is a good amount of literature available on general properties and applications of silk based biomaterials, there is an inadequacy of extensive review articles that specifically focus on silk based hydrogels. Silk-based hydrogels have a strong potential to be utilized in biomedical applications. Our work is an effort to highlight the research that has been done in the area of silk-based hydrogels. It aims to provide an overview of the advances that have been made and the future course available. It will provide an overview of the silk-based hydrogels as well as may direct the readers to the specific areas of application.

Functional analysis of the engineered cardiac tissue grown on recombinant spidroin fiber meshes

In the present study, we examined the ability of the recombinant spidroin to serve as a substrate for the cardiac tissue engineering. For this purpose, isolated neonatal rat cardiomyocytes were seeded on the electrospun spidroin fiber matrices and cultured to form the confluent cardiac monolayers. Besides the adhesion assay and immunostaining analysis, we tested the ability of the cultured cardiomyocytes to form a functional cardiac syncytium by studying excitation propagation in the cultured tissue with the aid of optical mapping. It was demonstrated that recombinant spidroin fiber meshes are directly suitable for the adherence and growth of the cardiomyocytes without additional coating with the attachment factors, such as fibronectin.