Preparation and characterization of chitosan-clay nanocomposites for the removal of Cu(II) from aqueous solution

Aluminosilicates-based nanosorbents for heavy metal removal - A review

Contamination of water bodies with heavy metals poses a significant threat to human health and the environment, requiring the development of effective treatment techniques. In this context, aluminosilicates emerge as promising sorbents due to their cost-effectiveness and natural abundance. This review provides a clear, in-depth, and comprehensive description of the structure, properties, and characteristics of aluminosilicates, supporting their application as adsorbents and highlighting their diversity and adaptability to different matrices and analytes. Furthermore, the functionalization of these materials is thoroughly addressed, detailing the techniques currently used, exposing the advantages and disadvantages of each approach, and establishing comparisons and evaluations of the performances of various functionalized aluminosilicates in the extraction of heavy metals in aqueous matrices. This work aims not only to comprehensively review numerous studies from recent years but also to identify trends in the study of such materials and inspire future research and applications in the field of contaminant removal using aluminosilicates.

Recent developments in chitosan based microgels and their hybrids

Chitosan based microgels have gained great attention because of their chemical stability, biocompatibility, easy functionalization and potential uses in numerous fields. Production, properties, characterization and applications of chitosan based microgels have been systematically reviewed in this article. Some of these systems exhibit responsive behavior towards external stimuli like pH, light, temperature, glucose, etc. in terms of swelling/deswelling in an aqueous medium depending upon the functionalities present in the network which makes them a potential candidate for various applications in the fields of biomedicine, agriculture, catalysis, sensing and nanotechnology. Current research development and critical overview in this field accompanying by future possibilities is presented. The discussion is concluded with recommended possible future works for further progress in this field.

Insights into adsorption performance and mechanism of chitosan-bentonite biocomposites for removal of imazethapyr and imazamox

In the present study, chitosan-bentonite biocomposites were synthesised by ultrasonication, characterized using spectral techniques and assessed for their effectiveness in removing imazethapyr and imazamox from aqueous solution. The response surface methodology based box behnken design was utilized to generate optimum conditions viz. pH (1 to 9), adsorbent dose (0.01 to 1.0 g), contact time (0.5 to 48 h) and temperature (15 to 55 °C) for adsorption of herbicides on biocomposites. Based on model predictions, 60.4 to 91.5 % of imazethapyr and 31.7 to 46.4 % of imazamox was efficiently removed under optimal conditions. Adsorption data exhibited a strong fit to pseudo-second-order kinetic (R2 > 0.987) and Freundlich isotherm (R2 > 0.979). The adsorption capacity ranged from 3.88 to 112 μg1-ng-1mLn and order of adsorption was: low molecular weight chitosan-bentonite> medium molecular weight chitosan-bentonite> high molecular weight chitosan-bentonite> bentonite. Thermodynamic experiments suggested a spontaneous, exothermic process, reducing the system randomness during adsorption. Desorption experiments revealed successful desorption ranging from 91.5 to 97.0 % using 0.1 M NaOH. The adsorption mechanism was dominated by synergistic electrostatic interactions and hydrogen bonding. These results collectively indicated the potential environmental remediation application of chitosan-bentonite biocomposites to adsorb imazethapyr and imazamox from wastewaters.

Synthesis and characterization of Alg/Gel/n-HAP/MNPs porous nanocomposite adsorbent for efficient water conservancy and removal of methylene blue in aqueous environments: Kinetic modeling and artificial neural network predictions

In this study, a new porous nanocomposite adsorbent for water conservancy was synthesized using the freeze-drying technique to adsorb a cationic dye (Methylene Blue) in an aqueous environment. The nanocomposite adsorbent was synthesized using natural polymers, gelatin, and sodium alginate, and hydroxyapatite and magnetic iron oxide nanoparticles was incorporated into the polymer network to improve mechanical properties and increase the surface-to-volume ratio. To confirm the structure and morphology of the sample, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM) techniques were employed. In addition, the magnetic properties of the synthesis of MNPs and porous nanocomposite were determined using value stream mapping (VSM) and dynamic light scattering (DLS). The adsorption of Methylene Blue (MB) was studied as a function of effective physical and variable parameters, such as time, temperature, pH, and initial concentration. The synthesized porous nanocomposite adsorbent exhibited a high adsorption capacity of 473.2 mg g-1 and followed pseudo-second-order kinetics. Additionally, the maximum adsorption capacity was observed at an initial concentration of 534.9 mg g-1. The adsorbent was also sensitive to temperature changes and was well-described thermodynamically and isothermally by the Freundlich isotherm model. Two artificial neural networks (ANNs) were also developed to investigate the properties of the synthesized nanocomposites. In the first ANN, the properties of the nanocomposites, including pore size, porosity, compressive strength, and elastic modulus, were predicted based on the variations in the weight percentages of gelatin and hydroxyapatite. In the second ANN, the effects of changes in temperature and initial concentration on the adsorption of MB by the synthesized nanocomposite samples were predicted. The ANNs' predictions indicated that increasing the weight percentage of hydroxyapatite nanoparticles and gelatin enhances the physical, mechanical, and adsorption performance of the synthesized porous nanocomposites. The best results were achieved for the sample containing 40 wt % of gelatin and 30 wt % of hydroxyapatite nanoparticles. Furthermore, the ANN models demonstrated that increasing the temperature and initial concentration resulted in an increase in the amount of MB adsorbed.

Preparation of novel clay/chitosan/ZnO bio-composite as an efficient adsorbent for tannery wastewater treatment

This study focuses on the preparation of an activated clay/chitosan/ZnO bio-composite using solvent casting method. Clay was activated through microwave radiation using 1 M H2SO4 at a minimum liquid to solid ratio (L/S). Chitosan was extracted from waste prawn shell and ZnO nanoparticles (ZnO-NPs) were synthesized from zinc acetate di-hydrate (Zn (CH3CO2)2·2H2O) using the sol-gel method. The produced bio-composite were characterized using FT-IR, TGA, XRD and SEM. Response surface methodology (RSM) was used for experimental design to find out the optimum conditions, e.g., pH of the solution, dosage of adsorbent and contact time for the removal of methylene blue (MB) and Cr (VI) using MINITAB 18.1 software. The optimum conditions obtained for the highest removal of MB were pH 9.57, dosage 55.44 mg and contact time 114.09 min. Similarly, for the highest removal of Cr (VI) the optimum conditions were pH 3.75, dosage 67.42 mg and contact time 111.27 min. Applying these optimum conditions, the highest removal efficiency for MB and Cr (VI) was obtained at 84.21 % and 82.67 % with 9.57 mg g-1 and 10.45 mg g-1 of adsorption capacity respectively. The adsorption data were studied for both Langmuir and Freundlich isotherm. The value of maximum Langmuir sorption was (qm) 17.346 mg g-1 and 17.621 mg g-1 for MB and Cr (VI) respectively.

Ecofriendly Elimination of Ni (II) Using Fabricated Nanocomposite Based on Chitosan/Silver Nanoparticles/Carbon Nanotubes

Nickel ions are hazardous heavy metals that are non-biodegradable and can lead to allergic sensitivity and dermatitis. Nanomaterials are chosen for their effective elimination of impurities from water structures based entirely on the variety of therapy and degree of purification. The target of this work was the combination of the properties of biopolymers such as chitosan, silver nanoparticles (SNPs), and carbon nanotubes (CNTs) in one ecofriendly compound for Ni (II) uptake from the aqueous solution. To attain this target, the endeavor was made by creating a nanocomposite based on chitosan/SNPs/CNTs. The characterization of the structure of the fabricated nanocomposite (Chit-SNPs-CNTs) was carried out using different techniques. The removal of Ni (II) was examined by studying the adsorption of Ni (II) ions onto the fabricated nanocomposite by batch adsorption using UV, XRD, XPS, and ICP techniques. Moreover, we investigated the effect of the contact time, pH of the solution, and mass of the adsorbent on the efficiency of the adsorption of Ni (II). The results show that the adsorption capacity of Ni (II) increased by increasing the contact time with a neutral pH. The maximum removal of Ni (II) ions (99.70%) was found using 0.3 g of the (Chit-SNPs-CNTs) nanocomposite. In addition, the results indicate that the fabricated nanocomposite has a high adsorption effectivity, which is associated to the function of the chitosan, SNPs, and CNTs in upgrading the adsorption efficiency. Finally, the results in the existing work indicate that the ecofriendly nanocomposite organized here gave excessive effectivity closer to the elimination of Ni (II).

Graphitic-C3N4/chitosan-doped NiO nanostructure to treat the polluted water and their bactericidal with in silico molecular docking analysis

Different concentrations (2 and 4 wt%) of graphite carbon nitride (g-C3N4) was doped into fixed amount of chitosan (CS) and nickel oxide (NiO) nanoparticles (NPs) via a co-precipitation route. The aim of study is to remove the pollutants from wastewater through catalytic activity (CA) and determine the bactericidal activities of synthesized products. X-ray diffraction pattern confirmed the cubic structure of NiO NPs and peak shifted to higher angle upon g-C3N4 doping. Fourier transform infrared spectroscopy revealed the existence of bending and stretching vibration mode. The absorption decreased gradually accompanied blue-shift and assessed bandgap energy increased upon doping. The high resolution transmission electron microscopy micrographs confirmed the formation of cubic-shaped NPs and elongated nanorods were seen for NiO and co-doped NiO. The catalytic efficiency of samples was examined using methylene blue (MB) in the presence of reducing agent. A remarkable dye de-colorization was confirmed with a g-C3N4 and CS doping; moreover, the bactericidal efficacy compared to Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was observed as 3.15 and 13.8 mm, respectively. In silico, molecular docking investigations targeting against b-lactamaseS. aureus and FabHE. coli enzymes assisted to elaborate the mechanism underlying microbicidal action of the NPs.

Clay-polymer nanocomposites for water and wastewater treatment: A comprehensive review

A majority of water pollution or contamination occurs through the discharge of effluents from industries. Wastewater treatment is crucial to protect our water sources from harmful pollutants. Therefore, a number of efforts have been made to tackle this issue by employing different techniques. Clay minerals and polymers are among these materials used extensively in wastewater treatment. While both have their own drawbacks, it is fascinating to discover that they complement each other to overcome most of their limitations. As a result, clay-polymer nanocomposites (CPNs) have been found to be highly efficient in the adsorption of pollutants from water and show promising results to be a long-term candidate for this purpose. In this paper, we discuss about different types of clay and polymers used in the preparation of CPNs. The work also focuses on the different types of clay-polymer nanocomposites, their synthesis and factors affecting their performance such as pH, temperature, contact time, pollutant concentration and adsorbent dose. In addition, the maximum adsorption capacity, mechanism and kinetics of adsorption are highlighted to assess the performance of CPNs. Various studies indicate that CPNs are only a few steps away from becoming one of the best options for wastewater treatment due to their multiple desirable properties.

A critical review on clay-based nanocomposite particles for application of wastewater treatment

Nanotechnology plays an important function in recent environmental aspects for the elimination of contaminants in the ecosystem. In recent times, nano-clay has initiated more concentration because of its distinctive physicochemical properties and characteristics. Recently, many types of research in clay-based nanocomposite were accomplished in the elimination of pollutants from water sources. Nanocomposite materials have advanced properties useful for contaminat removal such as higher surface area, thermal stability, selectivity to remove different contaminants, improved process ability, and fast decontamination. Thus, the development of clay-based composite materials is one of the upcoming directions to use effectively in water and wastewater treatment as adsorbent nanomaterials. This paper assesses the latest achievement in clay-based nanocomposite preparation, material property analysis and function for various pollutant removals. In particular, great consideration was paid to the recent progress in clay/metallic, clay-polymer, and clay-carbon composites presenting their application in the removal of different kinds of pollutants. Moreover, the mechanism of adsorption, the challenges and future perspective were also discussed to reach the optimum performance of the nanomaterials adsorbent. It is confirmed that clay-based nanocomposite materials are more cost-effective technology than conventional treatment methods.

Synthesis of hybrid biosorbent based on 1,2-cyclohexylenedinitrilotetraacetic acid modified crosslinked chitosan and organo-functionalized calcium alginate for adsorptive removal of Cu(II)

The present study is based on the synthesis of a novel hybrid biosorbent using 1,2-cyclohexylenedinitrilotetraacetic acid modified crosslinked chitosan and amino-thiocarbamate moiety functionalized sodium alginate (CDTA-CS/TSC-CA). The fabricated sorbent was employed to investigate the efficient recovery of Cu(II) from aqueous media. CDTA-CS/TSC-CA was characterized using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). Analysis confirmed the successful modification of both biopolymers and subsequent loading of Cu(II) ions. CDTA-CS/TSC-CA was casted in the form of hydrogel beads having different CDTA-CS to TSC-CA mass ratios i.e., 10.0-40.0% by mass. The hydrogel beads 4CDTA-CS/TSC-CA with CDTA-CS/TSC-CA mass ratio of 40.0% was found most effective for copper sorption. Equilibrium sorption results showed that initial concentration of copper, medium pH, contact time, sorbent dosage and temperature influenced the sorption capacity (q_e). Rate of sorption data was interpreted using different kinetic models and found best fitted with pseudo second order rate expression (R² ≈ 0.99), illustrating that the rate determining step includes the electron density transfer from sorbent coordination sites to central copper ions. Crank's RIDE equation and Elovich chemisorption model (ECM) revealed the presence of two sorption phases, initially rapid sorption followed by comparatively a slow uptake. Equilibrium sorption data was well depicted by Langmuir model and maximum monolayer adsorption capacity (q_m) was computed as 276.53 mg·g^-1 at 298 K. Standard Gibbs free energy change, ∆G° (-19.99, -20.18 and -20.36 kJ/ mol), standard enthalpy change, ∆H° (-8.95 kJmol) and standard entropy change, ∆S° (0.04 kJ/mol K^-1) values suggested that the adsorption process is spontaneous and exothermic. Hence, 4CDTA-CS/TSC-CA was found efficient biosorbent for copper removal from its dilute effluents.

A Facile Review on the Sorption of Heavy Metals and Dyes Using Bionanocomposites

Presently, hazardous metal and dye removal from wastewater is one of the major areas of research focus. For the elimination of these contaminants, many approaches have been devised and applied. However, the accomplishment of various water treatment processes has largely depended on the medium utilized and the associated problem with the leaching of harmful compounds into the water process with most commercial and chemically manufactured materials for water treatment processes. Hence, this study is aimed at reviewing existing studies on the sorption of heavy metals (HMs) and dyes using bionanocomposites (BNCs). The key focus of this review is on the development of eco-friendly, effective, and appropriate nanoadsorbents that could accomplish superior and enhanced contaminant sequestration using BNCs owing to their biodegradability, biocompatible, environmentally friendly, and not posing as secondary waste to the environment. The sorption of most pollutants was observed to be pH, sorbent dosage, and initial contaminant concentration-dependent, with most contaminants’ elimination taking place in the pH range of 2-10. The sorption process of HMs and dyes to various BNCs was superlatively depicted utilizing the Langmuir (LNR) and Freundlich (FL) as well as the pseudo-second-order (PSO) models, suggestive of the sorption process of a monolayer and multilayer and the chemisorption process, the rate-limiting stage in surface sorption. The established sorption capacities for the reviewed sorption process for various contaminants ranged from 1.47 to 740.97 mg/g. Future prospective for the treatment and remediation of contaminated water using BNCs was also discussed.

Application of chitosan modified nanocarriers in breast cancer

As per the WHO, every year around 2.1 million women are detected with breast cancer. It is one of the most invasive cancer in women and second most among all, contributing around 15% of death worldwide. The available anticancer therapies including chemo, radio, and hormone therapy are associated with a high load of reversible and irreversible adverse effects, limited therapeutic efficacy, and low chances of quality survival. To minimize the side effects, improving therapeutic potency and patient compliance promising targeted therapies are highly desirable. In this sequence, various nanocarriers and target modified systems have been explored by researchers throughout the world. Among these chitosan-based nanocarriers offers one of the most interesting, flexible, and biocompatible systems. The unique characteristics of chitosan like surface flexibility, biocompatibility, hydrophilicity, non-toxic and cost-effective behavior assist to overcome the inadequacy of existing therapy. The present review throws light on the successes, failures, and current status of chitosan modified novel techniques for tumor targeting of bioactives. It also emphasizes the molecular classification of breast cancer and current clinical development of novel therapies. The review compiles most relevant works of the past 10 years focusing on the application of chitosan-based nanocarrier against breast cancer.

Arsenic removal approaches: A focus on chitosan biosorption to conserve the water sources

Globally, millions of people have no access to clean drinking water and are either striving for that or oppressed to intake polluted water. Arsenic is considered one of the most hazardous contaminants in water bodies that reaches there due to various natural and anthropogenic activities. Modified chitosan has gained much attention from researchers due to its potential for arsenic removal. This review focuses on the need and potential of chitosan-based biosorbents for arsenic removal from water systems. Chitosan is a low-cost, abundant, biodegradable biopolymer that possesses unique structural aspects and functional sites for the adsorption of contaminants like arsenic species from contaminated water. The chitosan-based biosorbents had also been modified using various techniques to enhance their arsenic removal efficiencies. This article reviews various forms of chitosan and parameters involved in chitosan modification which eventually affect the arsenic removal efficiency of the resultant sorbents. The literature revealed that the modified chitosan-based sorbents could express higher adsorption efficiency compared to those prepared from native chitosan. The sustainability of the chitosan-based sorbents has also been considered in terms of reusability. Finally, some recommendations have been underlined for further improvements in this domain.

Green Electrospun Membranes Based on Chitosan/Amino-Functionalized Nanoclay Composite Fibers for Cationic Dye Removal: Synthesis and Kinetic Studies

Chitosan/poly(vinyl alcohol)/amino-functionalized montmorillonite nanocomposite electrospun membranes with enhanced adsorption capacity and thermomechanical properties were fabricated and utilized for the removal of a model cationic dye (Basic Blue 41). Effects of nanofiller concentrations (up to 3.0 wt %) on the morphology and size of the nanofibers as well as the porosity and thermomechanical properties of the nanocomposite membranes are studied. It is shown that the incorporation of the nanoclay particles with ∼10 nm lateral sizes into the polymer increases the size of the pores by about 80%. To demonstrate the efficiency of the adsorbents, the dye removal rate is investigated as a function of pH, adsorbent dosage, dye concentration, and nanofiller loading. The highest and fastest dye removal occurs for the nanofibrous membranes containing 2 wt % nanofiller, where about 80% of the cationic dye is removed after 15 min. This performance is at least 20% better than the pristine chitosan/poly(vinyl alcohol) membrane. The thermal stability and compression resistance of the nanocomposite membranes are found to be higher than those of the pristine membrane. In addition, reusability studies show that the dye removal performance of this nanocomposite membrane reduces by only about 5% over four cycles. The adsorption kinetics is explained by the Langmuir isotherm model and is expressed by a pseudo-second-order kinetic mechanism that determines a spontaneous chemisorption process. The results of this study provide a valuable perspective on the fabrication of high-performance, reusable, and efficient electrospun fibrous nanocomposite adsorbents.

Clay-Polymer Nanocomposites: Preparations and Utilization for Pollutants Removal

Nowadays, people over the world face severe water scarcity despite the presence of several water sources. Adsorption is considered as the most efficient technique for the treatment of water containing biological, organic, and inorganic contaminants. For this purpose, materials from various origins (clay minerals, modified clays, zeolites, activated carbon, polymeric resins, etc.) have been considered as adsorbent for contaminants. Despite their cheapness and valuable properties, the use of clay minerals as adsorbent for wastewater treatment is limited due to many factors (low surface area, regeneration, and recovery limit, etc.). However, clay mineral can be used to enhance the performance of polymeric materials. The combination of clay minerals and polymers produces clay-polymers nanocomposites (CPNs) with advanced properties useful for pollutants removal. CPNs received a lot of attention for their efficient removal rate of various organic and inorganic contaminants via flocculation and adsorption ability. Three main classes of CPNs were developed (exfoliated nanocomposites (NCs), intercalated nanocomposites, and phase-separated microcomposites). The improved materials can be explored as novel and cost-effective adsorbents for the removal of organic and inorganic pollutants from water/wastewater. The literature reported the ability of CPNs to remove various pollutants such as bacteria, metals, phenol, tannic acid, pesticides, dyes, etc. CPNs showed higher adsorption capacity and efficient water treatment compared to the individual components. Moreover, CPNs offered better regeneration than clay materials. The present paper summarizes the different types of clay-polymers nanocomposites and their effective removal of different contaminants from water. Based on various criteria, CPNs future as promising adsorbent for water treatment is discussed.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Insight into carbohydrate polymers (chitosan and 2- hydroxyethyl methacrylate/methyl methacrylate) intercalated bentonite-based nanocomposites as multifunctional and environmental adsorbents for methyl parathion pesticide

Two-hybrid products of bentonite intercalated carbohydrate polymers (chitosan (BE.P.CH) and 2- hydroxyethyl methacrylate/methyl methacrylate copolymer (BE/P.HEMA/MMA)) were synthesized as enhanced adsorbents for methyl parathion pesticide (MPP). The intercalation processes induced the affinity and the capacity of bentonite achieving the best value at pH 8. The maximum MPP adsorption capacities of BE (287.3 mg/g), BE/P.CH (634.5 mg/g), and BE/P.HEMA-MMA (868.5 mg/g) obtained after 300 min, 240 min, and 360 min, respectively. The kinetic properties of BE follow the Pseudo-second order behavior (R² = 0.93) while BE/P.CH and BE/P.HEMA-MMA are of Pseudo-First order behavior (R² > 0.92). Based on the equilibrium studies, the three products are of Freundlich isotherm behavior (R² > 0.9) and the uptake is of multilayer forms on heterogeneous surfaces. The Gaussian energies (>8 KJ/mol), Gibbs free energies (>20 to <40 KJ/mol), and enthalpies (>40 to <80 KJ/mol) give an indication about adsorption mechanism involved chemical and physical reactions. The thermodynamics of MPP uptake reactions by the three products are of endothermic and spontaneous behaviors. The MPP uptake in the presence of NH⁺⁴, PO₄^-3, Mn⁺², and Pb⁺² competitive ions reflects enhancement in the affinity of BE after the integration between it and the selected polymers.

The Synthesis and Effect of Silver Nanoparticles on the Adsorption of Cu2+ from Aqueous Solutions

The adsorption of Cu2+ ions from an aqueous solution using AgNPs synthesized from Convolvulus arvensis leaf extract was investigated. The characterization of AgNPs was investigated before and after the adsorption of Cu2+ ions via Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM) analyses. The adsorbent contained various functional groups in addition to the AgNPs, which contributed to the Cu2+ ions adsorption. The silver nanoparticle surface consisted of spherical particles and deep pores, which adsorbed numerous Cu2+ ions. The influences of dosage, pH, and contact time on adsorption of 10 and 50 mg/L Cu2+ at 298 K, and initial Cu2+ concentrations at 298 and 323 K were studied. It was found that the highest percentage of Cu2+ ions adsorbed from an aqueous solution was 98.99%; the aqueous solution had 10 mg/L of Cu2+ ions and 0.2 g of AgNPs, at pH 12 and 298 K. A pseudo-second kinetics model offered the most accurate description of the process of adsorption. The process of Cu2+ adsorption more resembled a Langmuir rather than a Freundlich isotherm model, including chemical and physical mixed adsorption (mixed adsorption) processes, and was exothermic and spontaneous.

Surface modification of biomaterials based on cocoa shell with improved nitrate and Cr(vi) removal

The present work addresses the development of simple, low-cost and eco-friendly cocoa-shell-based materials for efficient removal of heavy metal hexavalent chromium (Cr(vi)), and toxic nitrate (NO3 -) from aqueous solution. A conventional treatment process was used to purify cocoa shell (CS) into an adsorbent, followed by chemical grafting of dendrimers to promote its surface properties for nitrate and Cr(vi) removal. The morphology, surface charge, structure and stability of the new adsorbent were investigated by scanning electron microscopy, Fourier transform infrared and UV-visible spectroscopies, zeta potential, X-ray photoelectron spectrometry, and differential scanning calorimetry. The successful chemical grafting of the dendrimer (polyethyleneimine, PEI) onto purified CS was confirmed. CS-T-PEI-P proved to be a very efficient candidate for the removal of nitrate and chromium(vi). Removal of the two pollutants at different initial concentrations and pH values was studied and discussed. Sorption of chromium and nitrate was found to obey 2nd-order kinetics and a Freundlich-type isotherm, affording an uptake adsorption of 16.92 mg g-1 for NO3 - and 24.78 mg g-1 for Cr(vi). These results open promising prospects for its potential applications as a low cost catalyst in wastewater treatment.

Novel hydrazinocurcumin derivative loaded chitosan, ZnO, and au nanoparticles formulations for drug release and cell cytotoxicity

Synthesis of new hydrazinocurcumin derivative 4-((E)-2-(1-(4-Methoxy benzyl)-6-p-tolylpyridazin-3-yl)-3-((E)-4-hydroxy-3-methoxystyryl)-1H-pyrazol-5-yl)vinyl)-2-methoxyphenol (HCUR) through the reaction of curcumin (CUR) with 1- (4-(2-Methoxybenzyl)-6-p-tolylpyridazin-3-yl)hydrazine(VII). Nanoparticles formulations of (HCUR) loaded chitosan (CS), ZnO, Au, CS-ZnO and CS-Au NPs, via self-assembling process were developed to give CS-HCUR NPs, ZnO-HCUR NPs, Au-HCUR NPs, CS-ZnO-HCUR NPs and CS-Au-HCUR NPs. Chemical structures of (HCUR) and (HCUR) loaded nanoparticles formulations were characterized by UV-Vis, FTIR, Mass Spectrum, Elemental Analysis, 1HNMR, 13CNMR, TGA, DSC, SEM and TEM. The particle size of the nanoformulations ranged from 16.8 to 59.6 nm. NPs formulations were used as delivery system to sustain controlled drug delivery. Drug release profiles and cytotoxicity of NPs formulations against HCT-116 (colon carcinoma) and HepG-2 (hepatocellular cancer) cell lines were investigated. Drug release studies showed that by decreasing the pH value of release medium from 7.4 to 5.4 increased the release rate of (HCUR) from the NPs formulations. Cell viability study proved that NPs formulations revealed higher activity against HCT- 116 cell than (CUR) especially CS-HCUR NPs which displayed the most active with cell viability 1.80%. Moreover, ZnO-HCUR NPs expressed as the highest cytotoxic effect against HepG-2 cell with cell viability 0.98%.

Photocatalytic degradation of malachite green dye using chitosan supported ZnO and Ce-ZnO nano-flowers under visible light

Two types of chitosan-based composites (chitosan/ZnO and chitosan/Ce-ZnO composites) were synthesized under microwave irradiation and characterized as advanced catalysts of enhanced photocatalytic activity under the visible light. The morphological investigation reflected the formation of ZnO and Ce doped ZnO at stunning micro flowers of nano limps. Additionally, the optical studies reflected a reduction in the bandgap of ZnO from 3.3 eV to 2.85 eV and 2.5 eV after supporting it onto chitosan chains and after doping it with cerium, respectively. The synthetic composites were applied in photocatalytic removal of malachite green dye under a visible light source. The synthetic CH/ZnO and CH/Ce-ZnO showed enhancement in the photocatalytic removal of M.G by 54% and 87%, respectively, as compared to the pure ZnO. The synthetic composites are of high stability and can be reused for five photocatalytic degradation cycles at stunning removal percentages. The main oxidizing radicals during the removal of M.G by CH/ZnO are the generated electron-hole pairs as well as the hydroxyl radicals. The effective species in CH/Ce-ZnO photocatalytic system are the photogenerated hydroxyl radicals followed by the electron-hole pairs.

Clay-polymer nanocomposites: Progress and challenges for use in sustainable water treatment

Contaminant removal from water involves various technologies among which adsorption is considered to be simple, effective, economical, and sustainable. In recent years, nanocomposites prepared by combining clay minerals and polymers have emerged as a novel technology for cleaning contaminated water. Here, we provide an overview of various types of clay-polymer nanocomposites focusing on their synthesis processes, characteristics, and possible applications in water treatment. By evaluating various mechanisms and factors involved in the decontamination processes, we demonstrate that the nanocomposites can overcome the limitations of individual polymer and clay components such as poor specificity, pH dependence, particle size sensitivity, and low water wettability. We also discuss different regeneration and wastewater treatment options (e.g., membrane, coagulant, and barrier/columns) using clay-polymer nanocomposites. Finally, we provide an economic analysis of the use of these adsorbents and suggest future research directions.

In-situ fabrication of zirconium entrenched biopolymeric hybrid membrane for the removal of toxic anions from aqueous medium

The eutrophication of water bodies resulting from the excessive amounts of phosphate and nitrate ions in the water systems will cause serious environmental problems. This study deals with the adsorptive removal of toxic anions from aqueous medium using zirconium entrenched chitosan-starch membrane (Zr-CS-ST). The optimization of several influencing key factors like adsorbent dosage, shaking time, solution pH, aggressive ions, zero point charge and temperature were examined by batch mode adsorption experiments. In addition, Freundlich isotherm model showed an outstanding fit with the experimental data's, yielding the maximum adsorption capacities of 86.28 and 70.88 mg/g for phosphate and nitrate, respectively. Thermodynamic parameters, including the Gibbs free energy, entropy and enthalpy change indicated that the removal of both anions by Zr-CS-ST membrane was feasible, spontaneity and endothermic in nature. The diffusion and reaction based kinetic models were exposed to study about the kinetics and adsorption process were followed by pseudo-second-order and intra-particle diffusion kinetic models. The removal mechanism involved by different types of interactions such as complexation, ion exchange and electrostatic interaction, which were adopted for the removal mechanisms. We exposed that, Zr-CS-ST was successfully developed and will be effectively employed for the remediation of phosphate and nitrate ions in field/practical applications.

Preparation and characterization of magnetic chitosan-modified diatomite for the removal of gallic acid and caffeic acid from sugar solution

The phenolic substances in sugar cane juice affect the color value of white sugar. A magnetic chitosan-modified-diatomite (MCMD), as a new type of clarifying agent for sugar, prepared via a co-precipitation method combined with cross-linking treatment was firstly used to adsorb two primary phenolic acids of sugarcane juice: gallic acid (GA) and caffeic acid (CA). The maximum adsorption capacities for GA and CA by MCMD were 31.949 mg g^-1 and 27.640 mg g^-1, respectively. Additionally, our results showed that adsorption of GA and CA on MCMD fitted well with the pseudo-second-order model and Langmuir equation, respectively. The adsorption, a physical spontaneous endothermic process, might have involved electrostatic attraction and micropore filling. Importantly, MCMD has good regenerability and achieves better sulfur-free clarification of sugar cane juice and improves more significantly the food safety of white sugar than the traditional decolorization method.

Optimum selective separation of Cu(ii) using 3D ordered macroporous chitosan films with different pore sizes

3DOM-IICF coupled with colloidal crystal template and ion imprinting technology (IIP) was used to absorb copper ions (Cu(ii)) in water. Added polystyrene (PS) micro-spheres to form a three-dimensional ordered macroporous structure.

Improved waste-sourced biocomposite for simultaneous removal of crude oil and heavy metals from synthetic and real oilfield-produced water

Oil- and gas-produced water (PW) which contains various pollutants is an enormous threat to the environment. In this study, a novel low-cost bio-adsorbent was prepared from shrimp shell and acid-activated montmorillonite. The results of FT-IR spectroscopy, energy dispersive X-ray (EDX) analysis, and SEM-EDX technique indicated that the chitosan-activated montmorillonite (CTS-A-MMT) was prepared successfully. The synthesized CTS-A-MMT was applied to remove simultaneously five cationic and anionic metal species and crude oil from synthetic and real oilfield PW. The adsorption data indicated that crude oil and all studied metals (except As) were adsorbed to CTS-A-MMT in a monolayer model (best fitted by Langmuir model), while As adsorption fits well with Freundlich model. Kinetic models' evaluation demonstrated that the adsorption kinetics of metals on CTS-A-MMT are initially controlled by the chemical reaction (film diffusion) followed by intra-particle diffusion. Application of the prepared CTS-A-MMT in real oilfield PW indicated removal efficiency of 65 to 93% for metals and 87% for crude oil in simultaneous removal experiments. Presence of additional ions in PW decreased the removal of studied metals and crude oil considerably; however, the concentration of the investigated pollutants in treated PW is less than the ocean discharge criteria. It is concluded that the prepared CTS-A-MMT composite is a low-cost and effective adsorbent for treating wastewater contaminated with crude oil and heavy metals (i.e., PW).

Free radical synthesis of nanosilver/gelatin-poly (acrylic acid) nanocomposite hydrogels employed for antibacterial activity and removal of Cu(II) metal ions

The present work involves the synthesis of porous gelatin/AcA (PGE-AcA) hydrogel and novel porous gelatin-silver/AcA (NPGESNC-AcA) nanocomposite hydrogel, and their ability as effective biosorbents for the removal of Cu²⁺ ions from contaminated water. The formation of the samples was confirmed by UV-Vis, TEM, SEM, EDX, DLS, AFM, XRD, TGA/DTG and FTIR techniques. The adsorption studies results showed that maximum monolayer adsorption capacity of copper ions for PGE-AcA was achieved about 130.50 mg g^-1 in pH 6.0 for 50 min, and adsorption capacity for the NPGESNC-AcA was nearly 147.10 mg g^-1 in pH 5.5 for 40 min by atomic absorption spectroscopy technique. The Cu²⁺ ions loaded on the PGE-AcA and NPGESNC-AcA could be recovered by HCl above 65.8% and 78.7% after five consecutive cycles of adsorption/desorption, respectively. The results showed that the both of biosorbents loaded by Cu²⁺ ions could be easily regenerated and reusable. On the other hand, the results of adsorption kinetics and equilibrium isotherms were indicated high correlation coefficient (closer to a unit) for the pseudo-second-order and excellent fitted the adsorption data with the Langmuir isotherm model. Furthermore, the antimicrobial efficiency of the synthesized samples were tested on the Staphylococcus aureus and the Escherichia coli.

Facile preparation of antibacterial chitosan/graphene oxide-Ag bio-nanocomposite hydrogel beads for controlled release of doxorubicin

The present project describes the facile preparation of novel pH-sensitive bio-nanocomposite hydrogel beads based on chitosan (CH) and GO-Ag nanohybrid particles for controlled release of anti-cancer drugs such as doxorubicin (DOX). The loading efficiency of doxorubicin into test beads was measured via UV-vis spectroscopy analysis and was found to be high. The formation of silver nanoparticles on the GO sheets and structural characteristics were evaluated via FT-IR, TEM, XRD, and SEM techniques. In addition, the antibacterial activity, swelling and drug release profiles of prepared nanocomposite beads were evaluated. Also, in vitro drug release test was performed in order to investigate the efficiency of CH/GO-Ag nanocomposite hydrogel beads as a drug carrier for controlled release of anti-cancer drugs such as doxorubicin (DOX). A more sustained and controlled drug release profile was observed for CH/GO-Ag nanocomposite hydrogel beads that enhanced by increasing the GO-Ag nanohybrid particles content.