Characterization of new exopolysaccharide production by Rhizobium tropici during growth on hydrocarbon substrate

Drug delivery using reduction-responsive hydrogel based on carboxyethyl-succinoglycan with highly improved rheological, antibacterial, and antioxidant properties

The development of exopolysaccharide-based polymers is gaining increasing attention in various industrial biotechnology fields for materials such as thickeners, texture modifiers, anti-freeze agents, antioxidants, and antibacterial agents. High-viscosity carboxyethyl-succinoglycan (CE-SG) was directly synthesized from succinoglycan (SG) isolated from Sinorhizobium meliloti Rm 1021, and its structural, rheological, and physiological properties were investigated. The viscosity of CE-SG gradually increased in proportion to the degree of carboxyethylation substitution. In particular, when the molar ratio of SG and 3-chloropropionic acid was 1:100, the viscosity was significantly improved by 21.18 times at a shear rate of 10 s-1. Increased carboxyethylation of SG also improved the thermal stability of CE-SG. Furthermore, the CE-SG solution showed 90.18 and 91.78 % antibacterial effects against Escherichia coli and Staphylococcus aureus and effective antioxidant activity against DPPH and hydroxyl radicals. In particular, CE-SG hydrogels coordinated with Fe3+ ions, which improved both viscosity and rheological properties, while also exhibiting reduction-responsive drug release through 1,4-dithiothreitol. The results of this study suggest that SG derivatives, such as CE-SG, can be used as functional biomaterials in various fields such as food, cosmetics, and pharmaceutical industries.

Brucella pituitosa strain BU72, a new hydrocarbonoclastic bacterium through exopolysaccharide-based surfactant production

Hydrocarbon and heavy metal pollution are amongst the most severe and prevalent environmental problems due to their toxicity and persistence. Bioremediation using microorganisms is considered one of the most effective ways to treat polluted sites. In the present study, we unveil the bioremediation potential of Brucella pituitosa strain BU72. Besides its ability to grow on multiple hydrocarbons as the sole carbon source and highly tolerant to several heavy metals, BU72 produces different exopolysaccharide-based surfactants (EBS) when grown with glucose or with crude oil as sole carbon source. These EBS demonstrated particular and specific functional groups as determined by Fourier transform infrared (FTIR) spectral analysis that showed a strong absorption peak at 3250 cm-1 generated by the -OH group for both EBS. The FTIR spectra of the produced EBS revealed major differences in functional groups and protein content. To better understand the EBS production coupled with the degradation of hydrocarbons and heavy metal resistance, the genome of strain BU72 was sequenced. Annotation of the genome revealed multiple genes putatively involved in EBS production pathways coupled with resistance to heavy metals genes such as arsenic tolerance and cobalt-zinc-cadmium resistance. The genome sequence analysis showed the potential of BU72 to synthesise secondary metabolites and the presence of genes involved in plant growth promotion. Here, we describe the physiological, metabolic, and genomic characteristics of Brucella pituitosa strain BU72, indicating its potential as a bioremediation agent.

Physiological and transcriptomic changes drive robust responses in Paenarthrobacter sp. AT5 to co-exposure of sulfamethoxazole and atrazine

Agricultural waterways are often contaminated with herbicide and antibiotic residues due to the widespread use of these chemicals in modern agriculture. The search for resistant bacterial strains that can adapt to and degrade these mixed contaminants is essential for effective in situ bioremediation. Herein, by integrating chemical and transcriptomic analyses, we shed light on mechanisms through which Paenarthrobacter sp. AT5, a well-known atrazine-degrading bacterial strain, can adapt to sulfamethoxazole (SMX) while degrading atrazine. When exposed to SMX and/or atrazine, strain AT5 increased the production of extracellular polymeric substances and reactive oxygen species, as well as the rate of activity of antioxidant enzymes. Atrazine and SMX, either alone or combined, increased the expression of genes involved in antioxidant responses, multidrug resistance, DNA repair, and membrane transport of lipopolysaccharides. Unlike atrazine alone, co-exposure with SMX reduced the expression of genes encoding enzymes involved in the lower part of the atrazine degradation pathway. Overall, these findings emphasize the complexity of bacterial adaptation to mixed herbicide and antibiotic residues and highlight the potential of strain AT5 in bioremediation efforts.

Revealing the Structure Formation on Polyglycerol Citrate Polymers-An Environmentally Friendly Polyester as a Seed-Coating Material

A detailed structural investigation of a promising bio-based polymer, polyglycerol citrate polyester, obtained by the bulk polycondensation of glycerol (Gly) against citric acid (Cit) under mild reaction was performed. The reaction in conditions with and without catalyst use (sulfuric acid, H2SO4) was investigated, showing evidence that it is possible to modify the polymer solubility according to the ratio and catalyst utilization. 13C and 1H NMR indicated that synthesis catalyzed with Cit excess leads to higher esterification degrees of citrate groups. In contrast, the Gly moieties are more prominent in catalyzed polymers regardless of the excess monomers. Overall, a successful conversion of Gly and Cit into polyesters was attained even without catalysis, enabling a simple route for the large-scale production of this green material to be used as a coating material. This polymer has been shown to be well-suited for coating seeds and might be a promising material for similar agricultural applications. Tests on soybean seed coating with a PGCit solution of 75% indicated that the seed quality and germination rate were not affected by the PGCit coating, concluding that this polymer is suitable for this application.

Exploring the cellular surface polysaccharide and root nodule symbiosis characteristics of the rpoN mutants of Bradyrhizobium sp. DOA9 using synchrotron-based Fourier transform infrared microspectroscopy in conjunction with X-ray absorption spectroscopy

The functional significance of rpoN genes that encode two sigma factors in the Bradyrhizobium sp. strain DOA9 has been reported to affect colony formation, root nodulation characteristics, and symbiotic interactions with Aeschynomene americana. rpoN mutant strains are defective in cellular surface polysaccharide (CSP) production compared with the wild-type (WT) strain, and they accordingly exhibit smaller colonies and diminished symbiotic effectiveness. To gain deeper insights into the changes in CSP composition and the nodules of rpoN mutants, we employed synchrotron-based Fourier transform infrared (SR-FTIR) microspectroscopy and X-ray absorption spectroscopy. FTIR analysis of the CSP revealed the absence of specific components in the rpoN mutants, including lipids, carboxylic groups, polysaccharide-pyranose rings, and β-galactopyranosyl residues. Nodules formed by DOA9WT exhibited a uniform distribution of lipids, proteins, and carbohydrates; mutant strains, particularly DOA9∆rpoNp:ΩrpoNc, exhibited decreased distribution uniformity and a lower concentration of C=O groups. Furthermore, Fe K-edge X-ray absorption near-edge structure and extended X-ray absorption fine structure analyses revealed deficiencies in the nitrogenase enzyme in the nodules of DOA9∆rpoNc and DOA9∆rpoNp:ΩrpoNc mutants; nodules from DOA9WT and DOA9∆rpoNp exhibited both leghemoglobin and the nitrogenase enzyme. IMPORTANCE This work provides valuable insights into how two rpoN genes affect the composition of cellular surface polysaccharides (CSPs) in Bradyrhizobium sp., which subsequently dictates root nodule chemical characteristics and nitrogenase production. We used advanced synchrotron methods, including synchrotron-based Fourier transform infrared (SR-FTIR) microspectroscopy and X-ray absorption spectroscopy (XAS), for the first time in this field to analyze CSP components and reveal the biochemical changes occurring within nodules. These cutting-edge techniques confer significant advantages by providing detailed molecular information, enabling the identification of specific functional groups, chemical bonds, and biomolecule changes. This research not only contributes to our understanding of plant-microbe interactions but also establishes a foundation for future investigations and potential applications in this field. The combined use of the synchrotron-based FTIR and XAS techniques represents a significant advancement in facilitating a comprehensive exploration of bacterial CSPs and their implications in plant-microbe interactions.

Characterizing and demonstrating the role of Klebsiella SSN1 exopolysaccharide in osmotic stress tolerance using neutron radiography

Exopolysaccharides (EPS) are organic macromolecules naturally secreted by many microorganisms. EPS is increasingly used for agriculture and industrial purposes. This study focuses on isolate Klebsiella pneumonia SSN1, Klebsiella quasipeumonniae SGM81 isolated from rhizosphere to explore its water retention efficiency under drought conditions. Neutron Radiography was used to visualise water distribution in the sand under normal and drought conditions in the presence and absence of EPS producing bacteria. The EPS production was studied by applying Box Behnken design (BBD) under drought stress which was artificially induced by using polyethene glycol 6000 under osmotic stress condition 3.65% w/v of EPS dry weight was obtained. The relative water content (RWC) is used to calculate the amount of water present in the sand and was further studied by Neutron Radiography imaging with appropriate controls. FTIR and HPLC were also carried out for the characterisation of the extracted EPS. The sand experiments revealed that after 24 h of evaporation, the highest RWC was maintained by SSN1 at 29.7% compared to SGM81 (19.06%). SSN1 was found to release L-arabinose as the main sugar of its EPS under drought stress conditions by HPLC method. The FTIR data indicated the presence of β-glucans and polysaccharide α-pyranose between wavenumber 700 cm^-1-1500 cm^-1 and 1017 cm^-1-1200 cm^-1 respectively. The HPLC characterization of extracted EPS from osmotic stressed cells (run 3) displayed a peak designated to L-arabinose at 10.3 retention time (RT) for 132.4 mM concentration. While from run 5 with the controlled condition indicated the presence of L-rhamnose at 7.3 RT for 87 mM concentration. Neutron radiography enables the visualisation of water distribution in the sand as well as water transport in root-soil systems in situ. SSN1 has elicited EPS production in drought conditions with a low level of nitrogen and carbon.

Exopolysaccharide from the yeast Papiliotrema terrestris PT22AV for skin wound healing

INTRODUCTION

Exopolysaccharides (EPSs) are high-value functional biomaterials mainly produced by bacteria and fungi, with nutraceutical, therapeutic and industrial potentials.

OBJECTIVES

This study sought to characterize and assess the biological properties of the EPS produced by the yeast Papiliotrema terrestris PT22AV.

METHODS

After extracting the yeast's DNA and its molecular identification, the EPS from P. terrestris PT22AV strain was extracted and its physicochemical properties (structural, morphological, monosaccharide composition and molecular weight) were characterized. The EPS's in vitro biological activities and in vivo wound healing potential were also evaluated.

RESULTS

The obtained EPS was water-soluble and revealed an average molecular weight (M_w) of 202 kDa. Mannose and glucose with 97% and 3% molar percentages, respectively, constituted the EPS. In vitro antibacterial activity analysis of the extracted EPS exhibited antibacterial activity (>80%) against Escherichia coli, Staphylococcus aureus, and Staphylococcus epidermidis at a concentration of 2 mg/mL. The EPS showed cytocompatibility against the human fibroblast and macrophage cell lines and the animal studies showed a dose-dependent wound healing capacity of the EPS with higher wound closure at 10 mg/mL compared to negative and positive control after 14 days.

CONCLUSION

The EPS from P. terrestris PT22AV could serve as a promising source of biocompatible macromolecules with potential for skin wound healing.

Exopolysaccharides production from marine Bacillus strains and their antioxidant and bio-flocculant capacities

Microbial exopolysaccharides (EPS) have gained high scientific concern due to their exceptional physicochemical features and high industrial applicability. Owing to their biotechnological importance, the present study was designed to screen and isolate the EPS-producing Bacillus strains based on their growth potential on specific media and colony morphologies. The bacterial isolates Bacillus subtilis Bs1-01, Bacillus licheniformis Bl1-02, and Bacillus brevis Bb1-04 showed excellent EPS production due to their shortened lag phase and abundant biomass production. Shake-flask fermentation valued the maximum production yield of 50.19 ± 1.14 g/L by Bl1-02 after 72 h incubation (about 3.40 times higher than that of Bacillus thuringiensis Bt1-05). The basic component analysis revealed the improved amount of total carbohydrate, reducing sugar ends, and protein contents by Bl1-02 strain. Structural characteristics and functional groups of the EPS characterized by Fourier transform infrared spectroscopy demonstrated that all EPS were in close agreement to each other due to the presence of similar chemical bonds and functional groups. EPS from Bl1-02 strain showed stronger and more stable bio-emulsifying and hygroscopicity activities (12.23%). The crude EPS exhibited potent antioxidant properties which were examined against reducing potential (H₂O₂ scavenging) and total antioxidant tests. Among bio-flocculation activities of EPS at different concentrations, Bs1-01 strain produced EPS at a concentration of 60 mg/mL was observed to show the maximum value of 79.20%. In conclusion, the EPS from marine Bacillus strains showed excellent functional properties suggesting potential industrial applications that demand separate investigations.

Differences in the properties of extracellular polymeric substances responsible for PAH degradation isolated from Mycobacterium gilvum SN12 grown on pyrene and benzo[a]pyrene

This study aimed to evaluate the differences in the characteristics of extracellular polymeric substances (EPSs) secreted by Mycobacterium gilvum SN12 (M.g. SN12) cultured on pyrene (Pyr) and benzo[a]pyrene (BaP). A heating method was used to extract EPSs from M.g. SN12, and the composition, emulsifying activity, and morphology of EPS extracts were investigated. Results showed that EPS extracts varied significantly with Pyr or BaP addition to the bacterial cultures. The concentration of proteins and carbohydrates, the main components of the EPS extracts, first increased and then decreased, with an increase in the concentration of Pyr (0-120 mg L^-1) and BaP (0-120 mg L^-1). A similar trend was observed for the emulsifying activity of the EPS extracts. EPSs extracted from all cultures exhibited a compact structure with a smooth surface, except for EPSs extracted from BaP-grown M.g. SN12, which revealed a more fragile and softer surface. These findings suggest that Pyr and BaP had different influences on the properties of isolated EPSs, providing insights into the mechanism underlying polycyclic aromatic hydrocarbons (PAHs) biodegradation by some EPS-secreting bacteria. To the best of our knowledge, this is the first report on the texture profile of EPS samples extracted from M.g. SN12 grown on PAHs.

Production of Exopolysaccharides by Cultivation of Halotolerant Bacillus atrophaeus BU4 in Glucose- and Xylose-Based Synthetic Media and in Hydrolysates of Quinoa Stalks

A halotolerant, exopolysaccharide-producing bacterium isolated from the Salar de Uyuni salt flat in Bolivia was identified as Bacillus atrophaeus using next-generation sequencing. Comparisons indicate that the genome most likely (p-value: 0.0024) belongs to a subspecies previously not represented in the database. The growth of the bacterial strain and its ability to produce exopolysaccharides (EPS) in synthetic media with glucose or xylose as carbon sources, and in hydrolysates of quinoa stalks, was investigated. The strain grew well in all synthetic media, but the growth in glucose was better than that in xylose. Sugar consumption was better when initial concentrations were low. The growth was good in enzymatically produced cellulosic hydrolysates but was inhibited in hemicellulosic hydrolysates produced using hydrothermal pretreatment. The EPS yields were up to 0.064 g/g on initial glucose and 0.047 g/g on initial xylose, and was higher in media with relatively low sugar concentrations. The EPS was isolated and purified by a sequential procedure including centrifugation, cold ethanol precipitation, trichloroacetic acid treatment, dialysis, and freeze-drying. Glucose and mannose were the main sugars identified in hydrolyzed EPS. The EPS was characterized by size-exclusion chromatography, Fourier-transform infrared (FTIR) spectroscopy, heteronuclear single-quantum coherence nuclear magnetic resonance (HSQC NMR) spectroscopy, scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis. No major differences were elucidated between EPS resulting from cultivations in glucose- or-xylose-based synthetic media, while some divergences with regard to molecular-weight averages and FTIR and HSQC NMR spectra were detected for EPS from hydrolysate-based media.

Polysaccharide Based Polymers Produced by Scabby Cankered Cactus Pear (Opuntia ficus-indica L.) Infected by Neofusicoccum batangarum: Composition, Structure, and Chemico-Physical Properties

Neofusiccocum batangarum is the causal agent of scabby canker of cactus pear (Opuntia ficus-indica L.). The symptoms of this disease are characterized by crusty, perennial cankers, with a leathery, brown halo. Characteristically, a viscous polysaccharide exudate, caking on contact with air, leaks from cankers and forms strips or cerebriform masses on the surface of cactus pear cladodes. When this polysaccharide mass was partial purified, surprisingly, generated a gel. The TLC analysis and the HPLC profile of methyl 2-(polyhydroxyalkyl)-3-(o-tolylthiocarbomoyl)-thiazolidine-4R-carboxylates obtained from the mixture of monosaccharides produced by acid hydrolysis of the three EPSs examined in this research work [the polysaccharide component of the exudate (EPSC) and the EPSs extracted from asymptomatic (EPSH) and symptomatic (EPSD) cladodes] showed the presence of d-galactose, l-rhamnose, and d-glucose in a 1:1:0.5 ratio in EPSC while d-galactose, l-rhamnose, d-glucose, and d-xylose at the same ratio were observed in EPSH and EPSD. The presence of uronic acid residues in EPSC was also showed by solid state NMR and IR investigation. Furthermore, this manuscript reports the chemical-physical characterization of the gel produced by the infected cactus pear.

The potential of extracellular biopolymer production by Mesorhizobium sp. from monosaccharide constituents of lignocellulosic biomass

OBJECTIVE

The effects of monosaccharide constituents of lignocellulosic materials on exopolysaccharide (EPS) production by Mesorhizobium sp. Semia 816 were studied.

RESULTS

According to the results, by using sugars commonly found in lignocellulosic biomass as carbon sources (glucose, arabinose and xylose), no significant differences were observed in the production of EPS, reaching 3.39 g/L, 3.33 g/L and 3.27 g/L, respectively. Differences were observed in monosaccharide composition, mainly in relation to rhamnose and glucuronic acid contents (1.8 times higher when arabinose was compared with xylose). However, the biopolymers showed no differences in relation to rheological properties, with EPS aqueous-based suspensions (1.0% w/v) presenting pseudoplastic behavior, and a slight difference in degradation temperatures. Using soybean hulls hydrolysate as carbon source, slightly higher values were obtained (3.93 g/L).

CONCLUSION

The results indicate the potential of the use of lignocellulosic hydrolysates containing these sugars as a source of carbon in the cultivation of Mesorhizobium sp. Semia 816 for the production of EPS with potential industrial applications.

Enhancing the Efficiency of Soybean Inoculant for Nodulation under Multi-Environmental Stress Conditions

The development of rhizobial inoculants with increased resistance to abiotic stress is critical to mitigating the challenges related to climate change. This study aims at developing a soybean stress-tolerant Bradyrhizobium inoculant to be used under the mixed stress conditions of acidity, high temperature, and drought. Six isolates of Bradyrhizobium with high symbiotic performance on soybean were tested to determine their growth or survival abilities under in vitro conditions. The representative stress-tolerant Bradyrhizobium isolates 184, 188, and 194 were selected to test their ability to promote soybean growth under stress conditions compared to the type strain Bradyrhizobium diazoefficiens USDA110. The plant experiment indicated that isolate 194 performed better in symbiosis with soybean than other Bradyrhizobium strains under stress conditions. Based on the stress tolerance index, soybeans inoculated with isolate 194 showed a high growth performance and significantly better nodulation competition ability than USDA110 under several stress conditions. Interestingly, supplementation of sucrose in the culture medium significantly enhances the survival of the isolate and leads to improved plant biomass under various stress conditions. Analysis of the intra-cellular sugars of isolate 194 supplemented with sucrose showed the accumulation of compatible solutes, such as trehalose and glycerol, that may act as osmoprotectants. This study indicates that inoculation of stress-tolerant Bradyrhizobium together with sucrose supplementation in a medium could enhance bacterial survival and symbiosis efficiency under stress conditions. Although it can be applied for inoculant production, this strategy requires validation of its performance in field conditions before adopting this technology.

Evaluation of rhizoremediation and methane emission in diesel-contaminated soil cultivated with tall fescue (Festuca arundinacea)

Rhizoremediation, CH₄ emission, and bacterial community dynamics were evaluated in diesel-contaminated soil cultivated with tall fescue via a pot experiment. At the beginning of the experiment, total petroleum hydrocarbons (TPHs) removal efficiency was 30.2% in tall fescue-cultivated soil, which was significantly higher than that of unplanted soil (19.4%). However, when compost was added as a soil amendment, TPHs removal efficiency increased to 39.2% in tall fescue-cultivated soil. Interestingly, potential CH₄ emissions were more affected by the initial diesel concentration than by compost addition or tall fescue planting. Specifically, the potential CH₄ emission was approximately 3.8 times higher in the treatment with the highest initial diesel concentration (T-WC38) than that of the treatment with the lowest initial diesel concentration (T-WC5). Functional gene analysis revealed that TPHs removal had a linear correlation with the alkB/16S gene ratio, whereas potential CH₄ emission had a linear correlation with pmoA gene copy numbers. Initial diesel concentrations in soil also affected bacterial community structures and the genera Rhizobium, Halothiobacillus, and Geobacter were found to be positively linked to diesel-contaminated soil rhizoremediation. Therefore, this study provides useful insights into the development of strategies to enhance rhizoremediation efficiency and CH₄ emission mitigation in diesel-contaminated soils.

Gene expression abundance dictated exopolysaccharide modification in Rhizobium radiobacter SZ4S7S14 as the cell's response to salt stress

A molecular and metabolic behaviour of EPS-producing and salt-tolerant bacterium Rhizobium radiobacter SZ4S7S14 along with its practical application in salt-stress was investigated. The research target was identification and expression profiles of a large EPS biosynthesis gene cluster, possible structural modification of EPS under salt-stress effect and analysis of the gene(s) relative expression and structural modification correlation. As expected, transposons insertions were identified within or near the coding regions of exoK and exoM, previously known large gene cluster that is required for EPS I synthesis. Different expression levels of exoK and exoM in different salt-stress models resulted in structural modification of EPS, which was seen basically in monomers molar ratio. As a result of downregulation of the genes the strain produced EPS samples with monomers ratio: (1) Glu:Man:Gal:Xyl:Ara:Rha:Rib = 31.21:3.02:2.77:1:0.91:0.64:0.41 (in 0.25% NaCl); (2) Glu:Man:Gal:Xyl:Ara:Rha:Rib = 7.65:1:0.69:0.22:0.2:0.16:0.1 (in 0.5% NaCl); (3) Glu:Man:Gal:Ara:Xyl:Rha:Rib = 9.39:1.89:1:0.58:0.52:0.46:0.26 (in 1% NaCl); and (4) Glu:Man:Ara:Xyl:Rib:Gal = 7.9:2:2:1.58:1.1:1 (in 2.0% NaCl), whereas in control (without NaCl): Glc:Man:Gal:Xyl:Ara:Rha:Rib = 11.66:1:0.90:0.37:0.37:0.15:0.14. It was found that, salt-stress not only leads to downregulation of a large EPS biosynthesis gene cluster, including exoK and exoM genes, but also impacting on their relative expression degree, re-groups of the monomers within the EPS matrix and dictates molar ratio of the monosaccharides in the final metabolite.

Optimal economic productivity of exopolysaccharides from lactic acid bacteria with production possibility curves

It is important that exopolysaccharides (EPS) of lactic acid bacteria (LAB) with antioxidant activities are produced economically, as it can confer beneficial effects on human health. A model of production possibility curve (PPC) was conducted to the optimal productivity of EPS for the purpose of economic production. The results revealed that the optimal productivity of EPS was approached to the set by NB (90%) and MRS (55%) broth from PPC with equation of PPC(Y) = 100-0.0335*EXP(0.08*X). The EPS productivity and yield of strain LaP with optimal production set (OPS) were, respectively, 291.0 ± 2.6 mg and 13.5 ± 0.7%, and the cost of OPS can be saved by about 31.6%, while that for strain BaP were 280.7 ± 2.5 mg and 13.0 ± 0.7%, respectively, and with 31.6% saved as well. Besides, the EPS produced from PPC mode has appropriate antioxidant ability with 34.6 ± 0.7% (LaP) and 37.6 ± 0.9 (%) (BaP) of DPPH radical scavenging activity under the economic cost. The strategy of controlling the medium composition not only could improve the productivity of EPS, but also enhance the antioxidant effects of EPS. Both LaP and BaP with antioxidant potential may be useful as supplements in the health-promoting food industry.

Flocculating, emulsification and metal sorption properties of a partial characterized novel exopolysaccharide produced by Rhizobium tropici SRA1 isolated from Psophocarpus tetragonolobus (L) D.C

A novel exopolysaccharide (EPS) was produced by a bacterium which was isolated from Psophocarpus tetragonolobus (L) D.C. and identified as 99% Rhizobium tropici SRA1 by 16S rDNA sequencing. The flocculating performances along with emulsifying activity began simultaneously with the growth and the production of EPS and reached its utmost at 28 h. EPS was purified via chilled ethanol precipitation followed by dialysis and lyophilization. The existence of hydroxyl, methoxyl, and carboxylic functional groups were confirmed by Fourier transform infrared (FT-IR) spectrum. EPS was found to be compose of 82.44% neutral sugar and 15.93% uronic acid. The average molecular weight of the exopolysaccharide was estimated as ~ 1.8 × 10⁵. Gas-liquid chromatography indicated the presence of glucose and galactose at a molar ratio of 3:1 in EPS. In the pH range of 3-5 with EPS dosage of 15 mg/l at 30 °C, cation-independent flocculation greater than 90% was observed. Emulsification indices (E₂₄) of EPS were observed as 86.66%, 83.33%, 76.66%, and 73.33% with olive oil, kerosene, toluene, and n-hexane respectively. Biosorption of Cu K [45.69 wt%], Cu L [05.67 wt%], Co K [15.58 wt%], and Co L [11.72 wt%] by EPS was confirmed by energy-dispersive X-ray spectroscopy (EDS). This report on the flocculating, emulsifying, and metal sorption properties of EPS produced by R. tropici SRA1 is unique in the literature.

The biopolymer produced by Rhizobium viscosum CECT 908 is a promising agent for application in microbial enhanced oil recovery

Polymer flooding is one of the most promising techniques used to increase the productivity of mature oil reservoirs. Polymers reduce the mobility ratio of the injected water relative to the crude oil, improving the displacement of the entrapped oil and consequently, increasing oil recovery. Biopolymers such as xanthan gum have emerged as environmentally friendly alternatives to the chemical polymers commonly employed by the oil industry. However, in order to seek more efficient biomolecules, alternative biopolymers must be studied. Here, the applicability of a biopolymer produced by Rhizobium viscosum CECT 908 in Microbial Enhanced Oil Recovery (MEOR) was evaluated. This biopolymer exhibited better rheological properties (including higher viscosity) when compared with xanthan gum. Its stability at high shear rates (up to 300 s^-1), temperatures (up to 80 °C) and salinities (up to 200 g/L of NaCl) was also demonstrated. The biopolymer exhibited better performance than xanthan gum in oil recovery assays performed with a heavy crude oil, achieving 25.7 ± 0.5% of additional recovery. Thus the R. viscosum CECT 908 biopolymer is a promising candidate for application in MEOR.

Aerobic and oxygen-limited enrichment of BTEX-degrading biofilm bacteria: dominance of Malikia versus Acidovorax species

Due to their high resistance against environmental challenges, bacterial biofilms are ubiquitous and are frequently associated with undesired phenomena in environmental industry (e. g. biofouling). However, because of the high phylogenetic and functional diversity, bacterial biofilms are important sources of biotechnologically relevant microorganisms, e.g. those showing bioremediation potential. In our previous work, the high phylogenetic and metabolic diversity of a clogging biofilm, developed in a simple aromatic hydrocarbon (BTEX)-contaminated groundwater well was uncovered. The determination of relationships between different groups of biofilm bacteria and certain metabolic traits has been omitted so far. Therefore, by setting up new biofilm-based enrichment microcosms, the research goal of the present study was to identify the aerobic/hypoxic BTEX-degrading and/or prolific biofilm-forming bacteria. The initial bacterial community composition as well as temporal dynamics due to the selective enrichment has been determined. The obtained results indicated that the concentration of dissolved oxygen may be a strong selective force on the evolution and final structure of microbial communities, developed in hydrocarbon-contaminated environments. Accordingly, members of the genus Malikia proved to be the most dominant community members of the aerobic BTEX-degrading enrichments. Acidovorax spp. dominated the oxygen-limited/hypoxic setup. During the study, a strain collection of 23 different bacterial species was obtained. Non-pathogenic members of this strain collection, with outstanding biodegradation (e.g. Pseudomonas, Variovorax isolates) and biofilm-forming potential (e.g. Rhizobium), may potentially be applied in the development of biofilm-based semipermeable reactive biobarriers.

Rheological, textural and emulsifying properties of an exopolysaccharide produced by Mesorhizobium loti grown on a crude glycerol-based medium

In the present study, a new extracellular polysaccharide (EPS-M816) was obtained during the growth of Mesorhizobium loti Semia 816 on a crude glycerol-based medium. EPS-M816 precipitate mainly consisted of carbohydrates (82.54%) and proteins (11.31%), and the weight average molecular weight was estimated at 1.646 × 10⁶ Da. The biopolymer was characterized by FT-IR and NMR spectroscopy, and was found to have typical functional groups of other rhizobial polysaccharides. Furthermore, the rheological and emulsifying properties were investigated. The EPS-M816 solution (1.0% w/v) showed typical pseudoplastic non-Newtonian fluid behavior, and the addition of sodium and potassium chloride (1 mol L^-1) increased the apparent viscosity. Regarding its emulsification activity, EPS-M816 formed emulsions with different food-grade vegetable oils (soybean, rice, canola, sunflower and corn oils), showing emulsification index values over 65% in 24 h, indicative of strong emulsion-stabilizing capacity. The biopolymer was able to form gels with texture parameters similar to those reported for xanthan gum and low syneresis. Overall, these results suggest that EPS-M816 is a good candidate for application in the food, cosmetics and pharmaceutical industries as a thickening, gelling, stabilizing and emulsifying agent.