Influence of graphene-oxide nanosheets impregnation on properties of sterculia gum-polyacrylamide hydrogel formed by radiation induced polymerization

Poly(2-hydroxyethyl methacrylate) hydrogels containing graphene-based materials for blood-contact applications: from soft inert to strong degradable material

Degradable biomaterials for blood-contacting devices (BCDs) are associated with weak mechanical properties, high molecular weight of the degradation products and poor hemocompatibility. Herein, the inert and biocompatible FDA approved poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogel was turned into a degradable material by incorporation of different amounts of a hydrolytically labile crosslinking agent, pentaerythritol tetrakis(3-mercaptopropionate). In situ addition of 1wt.% of oxidized graphene-based materials (GBMs) with different lateral sizes/thicknesses (single-layer graphene oxide, and oxidized forms of few-layer graphene materials) was performed to enhance the mechanical properties of hydrogels. An ultimate tensile strength increases up to 0.2 MPa (293% higher than degradable pHEMA) was obtained using oxidized few-layer graphene with 5 μm lateral size. Moreover, the incorporation of GBMs has demonstrated to simultaneously tune the degradation time, which ranged from 2 to 4 months. Notably, these features were achieved keeping not only the intrinsic properties of inert pHEMA regarding water uptake, wettability and cytocompatibility (short and long term), but also the non-fouling behavior towards human cells, platelets and bacteria. This new pHEMA hydrogel with degradation and biomechanical performance tuned by GBMs, can therefore be envisioned for different applications in tissue engineering, particularly for BCDs where non-fouling character is essential. STATEMENT OF SIGNIFICANCE: Suitable mechanical properties, low molecular weight of the degradation products and hemocompatibility are key features in degradable blood contacting devices (BCDs), and pave the way for significant improvement in the field. In here, a hydrogel with outstanding anti-adhesiveness (pHEMA) provides hemocompatibility, the presence of a degradable crosslinker provides degradability, and incorporation of graphene oxide reestablishes its strength, allowing tuning of both degradation and mechanical properties. Notably, these hydrogels simultaneously provide suitable water uptake, wettability, cytocompatibility (short and long term), no acute inflammatory response, and non-fouling behavior towards endothelial cells, platelets and bacteria. Such results highlight the potential of these hydrogels to be envisioned for applications in tissue engineered BCDs, namely as small diameter vascular grafts.

An approach of pectin from Citrus aurantium L. for superabsorbent resin with superior quality for hygiene products: Salt resistance, antibacterial, nonirritant and biodegradability

In this paper, a kind of superabsorbent resin (SAR) with superior quality for hygiene products was developed using Fructus Aurantii Immaturus pectin (FAIP) from Citrus aurantium L.. FAIP-g-AM/AMPS SAR was established by free radical graft co-polymerization with FAIP as skeleton structure, N, N'-Methylene-bis (acrylamide) (MBA) as the cross-linker. Meanwhile, the functional monomers of acrylamide (AM) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) were introduced. The structure and morphology of FAIP-g-AM/AMPS were characterized by FTIR, ¹³C NMR, XRD, SEM and TG-DSC analysis. The results confirmed that the AFIP-g-AM/AMPS SAR was successfully prepared, which exhibited a three-dimensional (3D) network structure and an excellent thermal stability. The absorption and retention capacity of FAIP-g-AM/AMPS was comparable to or even better than commercial diapers and sanitary napkins. Significantly, FAIP-g-AM/AMPS itself exhibited excellent antibacterial and safety. FAIP-g-AM/AMPS has an inhibition ratio of 97.1 % for Escherichia coli (E. coli) and 98.5 % for Staphylococcus aureus (S. aureus), and was non-irritating and non-allergic to the skin. In addition, FAIP-g-AM/AMPS presented amazing biodegradability and a weight loss reached 37.1 % after 30 days by soil burial test. The research provides a safe and high-performance SAR, which expected to be used in hygiene products such as baby diapers, adult incontinence pads and sanitary napkins.

Self-healable nanocellulose composite hydrogels combining multiple dynamic bonds for drug delivery

Herein, we developed two nanocomposite polysaccharide hydrogels TPP-CNC and TPP-CNF via simple mixing method, which were constructed with multiple dynamic bonds. The microstructural features, mechanical properties, rheological properties, healable ability and biocompatibility of the complex hydrogels were evaluated. The TPP-CNC and TPP-CNF complex hydrogels exhibited higher tensile strength than pure polysaccharide hydrogel, from ~259 KPa to ~890 KPa and ~910 KPa, respectively, that was attributed to the contribution of ionic crosslinked network and hydrogen bonds. In addition, the hydrogels indicated superior fatigue resistance and high energy dissipation ratio during loading-unloading tests because of the physical sacrifice bonds, which also decreased the self-healing time at room temperature (~15 min). More importantly, the drug loaded nanocomposite hydrogels showed sustained release, reduction burst release, increased release under acidic environment, and the drug release kinetics belonged to Fickian diffusion mechanism. Therefore, the nanocellulose polysaccharide hydrogels have the highly promising to explore as biomaterials for drug delivery.

Application of biomaterials and tissue engineering in bladder regeneration

The primary functions of the bladder are storing urine under low and stable pressure and micturition. Various forms of trauma, tumors, and iatrogenic injuries can cause the loss of or reduce bladder function or capacity. If such damage is not treated in time, it will eventually lead to kidney damage and can even be life-threatening in severe cases. The emergence of tissue engineering technology has led to the development of more possibilities for bladder repair and reconstruction, in which the selection of scaffolds is crucial. In recent years, a growing number of tissue-engineered bladder scaffolds have been constructed. Therefore, this paper will discuss the development of tissue-engineered bladder scaffolds and will further analyze the limitations of and challenges encountered in bladder reconstruction.

Graphene-based materials: the key for the successful application of pHEMA as a blood-contacting device

Thrombosis and infection are the leading causes of blood-contacting device (BCD) failure, mainly due to the poor performance of existing biomaterials. Poly(2-hydroxyethyl methacrylate) (pHEMA) has excellent hemocompatibility but the weak mechanical properties impair its use as a bulk material for BCD. As such, pHEMA has been explored as a coating, despite the instability and difficulty of attachment to the underlying polymer compromise its success. This work describes the hydrogel composites made of pHEMA and graphene-based materials (GBM) that meet the biological and mechanical requirements for a stand-alone BCD. Five GBM differing in thickness, oxidation degree, and lateral size were incorporated in pHEMA, revealing that only oxidized-GBM can reinforce pHEMA. pHEMA/oxidized-GBM composites are cytocompatible and prevent the adhesion of endothelial cells, blood platelets, and bacteria (S. aureus), thus maintaining pHEMA's anti-adhesive properties. As a proof of concept, the thrombogenicity of the tubular prototypes of the best formulation (pHEMA/Graphene oxide (GO)) was evaluated in vivo, using a porcine arteriovenous-shunt model. pHEMA/GO conduits withstand the blood pressure and exhibit negligible adhesion of blood components, revealing better hemocompatibility than ePTFE, a commercial material for vascular access. Our findings reveal pHEMA/GO, a synthetic and off-the-shelf hydrogel, as a preeminent material for the design of blood-contacting devices that prevent thrombosis and bacterial adhesion.

Hydrolyzed Karaya Gum: Gelatin Complex Coacervates for Microencapsulation of Soybean Oil and Curcumin

This is the first report on utilizing hydrolyzed karaya gum (HKG) as a novel polyanion material for complex coacervation with gelatin A. With negative zeta potentials at pH > 2.5, HKG formed the complex coacervate with a maximum yield at pH 3.75 and 1 : 1 HKG:gelatin ratio. The optimal complex coacervates were used to encapsulate soybean oil containing curcumin using different shell:core ratios, homogenization speeds, concentrations of emulsifier, and drying techniques. Optical microscopy showed that increasing homogenization speed and Tween 80 concentration produced smaller and more uniform coacervate particles. Increasing the shell:core mass ratio from 1 to 4 resulted in a linear increase in encapsulation efficiencies for both soybean oil and curcumin. Accelerated peroxidation tests on the microcapsules showed enhanced protective effects against oil peroxidation when increasing shell:core ratios and using freeze-drying instead of oven-drying at 50 oC. In vitro release of curcumin in simulated gastric and intestinal fluids was faster when using freeze-drying and decreasing shell:core ratio. This study shows perspective novel applications of HKG in microencapsulating active ingredients for food and pharmaceutical industries.

When polymers meet carbon nanostructures: expanding horizons in cancer therapy

The development of hybrid materials, which combine inorganic with organic materials, is receiving increasing attention by researchers. As a consequence of carbon nanostructures high chemical versatility, they exhibit enormous potential for new highly engineered multifunctional nanotherapeutic agents for cancer therapy. Whereas many groups are working on drug delivery systems for chemotherapy, the use of carbon nanohybrids for radiotherapy is rarely applied. Thus, nanotechnology offers a wide range of solutions to overcome the current obstacles of conventional chemo- and/or radiotherapies. Within this review, the structure and properties of carbon nanostructures (carbon nanotubes, nanographene oxide) functionalized preferentially with different types of polymers (synthetic, natural) are discussed. In short, synthesis approaches, toxicity investigations and anticancer efficacy of different carbon nanohybrids are described.

Graft copolymerization of polyvinylpyrollidone onto Azadirachta indica gum polysaccharide in the presence of crosslinker to develop hydrogels for drug delivery applications

In this work, graft-copolymerization of poly vinylpyrollidone onto Azadirachta indica gum polysaccharide in the presence of crosslinker has been carried out to prepare the hydrogel for use in drug delivery. The polymers were characterized by cryo-SEM, AFM, FTIR, and ¹³C NMR. The gel strength, cross-link density, mesh size, thrombogenicity, antioxidant and mucoadhesion properties of the gum-PVP hydrogels were determined along with the evaluation of drug release profile of methyl prednisolone, a colonic anti-inflammatory agent, from the drug loaded hydrogels. Cryo SEM images showed the porous crosslinked structure of the polymer network. The drug release from the polymer followed non-Fickian diffusion mechanism. The polymers showed 71.47 ± 4.63% haemo-compatibility and 05.52 ± 0.59 Nmm gel strength. The value of DPPH radical scavenging assay (73.16 ± 04.85%) indicated that the gum-PVP polymers are antioxidant. The results of biocompatibility, antioxidant activity, mucoadhesion and drug release properties of the polymers inferred the use of this drug carrier for colonic drug delivery.

Improvement of efficacy and decrement cytotoxicity of oxaliplatin anticancer drug using bovine serum albumin nanoparticles: synthesis, characterisation and release behaviour

To sustained release of an anticancer drug, oxaliplatin (OX), a non-toxic and biocompatible nanocarrier based on bovine serum albumin (BSA) were synthesised by desolvation method and characterised using Fourier-transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and dynamic light scattering. The results showed that the BSA nanoparticles (BSANPs) with a mean magnitude of 187.9 ± 1.2 nm have spherical morphology with a smooth surface and a uniform distribution. Furthermore, OX was loaded onto the BSANPs and the loading was confirmed by FTIR, AFM and FESEM techniques. The percentage of encapsulation efficiency and drug loading were determined by absorption spectroscopy (UV-vis). The drug release studies showed that release of OX from BSANPs exhibited slower release rate. However, the release kinetics followed the first-order kinetic for both of them with the non-Fickian release behaviour. The electrochemical analysis showed stability of OX loaded onto the BSANPs (OX@BSANPs) and confirmed the diffusion mechanism. Furthermore, the results of MTT assay revealed increasing of normal cell viability and cancer cell death in the OX@BSANPs compared to only OX. It was shown that the BSANPs could be safely used as a biocompatible nanocarrier for the sustained release of OX.

Antimicrobial gum bio-based nanocomposites and their industrial and biomedical applications

Gum polysaccharides are derived from renewable sources. They are readily available, inexpensive, non-hazardous and eco-friendly. Depending upon the source, gums may be categorized as microbial gums, plant exudate gums or seed gums. Naturally occurring gum carbohydrates find multiple applications in the biomedical arena, compared with synthetic compounds, because of their unique structures and functionalities. Gums and their biocomposites are preferred for sustained drug delivery because they are safe and edible as well as more susceptible to biodegradation. The present review provides a state-of-the-art conspectus on the industrial and biomedical applications of antimicrobial gum-based biocomposites. Different kinds of gums polysaccharides will first be addressed based on their sources. Metal-, carbon- and organic-based nanostructures that are used in gum nanocomposites will then be reviewed with respect to their industrial and biomedical applications, to provide a backdrop for future research.

Karaya gum-graft-poly(2-(dimethylamino)ethyl methacrylate) gel: An efficient adsorbent for removal of ionic dyes from water

In the present study, a novel hydrogel based on the polysaccharide, 'Karaya gum' has been synthesised by graft copolymerization and evaluated as an adsorbent for the removal of ionic dyes from aqueous solution. The hydrogel was made by simultaneous grafting and cross linking of Karaya gum using 2-(dimethylamino)ethyl methacrylate (DMAEMA) and N,N'-methylene-bis-acrylamide via microwave irradiation. The graft copolymer gel was characterized by FTIR, TGA, SEM techniques. The swelling of the gel studied in buffer media of varying pH revealed a pH responsive behaviour with a maximum swelling in neutral pH and a minimum swelling at pH 1.2. The temperature dependent swelling study indicated 40 °C as the lowest critical solution temperature. Kinetic studies indicated the swelling to be a second order process with Fickian diffusion as the water transport mechanism. The adsorption studies indicated maximum adsorption capacity of 89.28 and 101.42 mg/g towards methylene blue and indigo carmine respectively. The dye adsorption data is found to fit well with pseudo- second order kinetic model and the Freundlich adsorption isotherm model. The adsorption was found to be a multistep process with surface adsorption followed by intraparticle diffusion. Thermodynamic studies revealed the adsorption of dyes to be spontaneous.

Electro-responsive graphene oxide hydrogels for skin bandages: The outcome of gelatin and trypsin immobilization

A free radical polymerization method was adopted for the fabrication of hybrid hydrogel films based on acrylamide and polyethylene glycol dimethacrylate as plasticizing and crosslinking agents, respectively, to be employed as smart skin bandages. Electro-sensitivity, biocompatibility and proteolytic properties were conferred to the final polymer networks by introducing graphene oxide (0.5% w/w), gelatin or trypsin (10% w/w) in the polymerization feed. The physical chemical and mechanical characterization of hybrid materials was performed by means of determination of protein content, Raman spectroscopy, thermogravimetric analysis and measurement of tensile strength. The evaluation of both water affinity and curcumin release profiles (analyzed by suitable mathematical modelling) upon application of an external electric stimulation in the 0-48 voltage range, confirmed the possibility to modulate the release kinetics. Proper proteolytic tests showed that the trypsin enzymatic activity was retained by 80% upon immobilization. Moreover, for all samples, we observed a viability higher than 94% in normal human fibroblast cells (MRC-5), while a reduction of methicillin-resistant Staphylococcus aureus CFU mL^-1 (90%) was obtained with curcumin loaded samples.

Green synthesis of monolithic column incorporated with graphene oxide using room temperature ionic liquid and eutectic solvents for capillary electrochromatography

In this work, a hybrid monolith incorporated with graphene oxide (GO) was prepared in the first time with binary green porogens of deep eutectic solvents (DESs) and room temperature ionic liquids (RTILs). GO was modified with 3-(trimethoxysilyl) propylmethacrylate (γ-MPS), and the resultant GO-MPS can be incorporated into poly (methacrylic acid-co-butylmethacrylate-co-ethylene glycol dimethacrylate) monoliths covalently. A hybrid monolithic column with high permeability and homogeneity can be achieved due to good dispersion of GO-MPS in the green solvents. The GO-MPS incorporated monolith was characterized by transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis and nitrogen adsorption tests. The separation of small organic molecules of alkylphenones and alkylbenzenes was used to evaluate the performance of GO-MPS grafted monolith. The GO-MPS grafted monolith displayed the maximum column efficiency of 147,000 plates/m, about twice higher than the GO-free monolith. In addition, all of the retention and selectivity of small molecules of alkylphenones and alkylbenzenes increased due to the addition of GO-MPS. The results demonstrated that the use of DESs and RTILs is a powerful approach for the preparation of GO incorporated polymer monoliths. The monolith was further applied to the separation of tryptic digests from bovine serum albumin, and the result indicated its potential in the analysis of some complex samples.