Hydrocolloidal properties of flaxseed gum/konjac glucomannan compound gel

Physicochemical properties and in vitro digestive behavior of astaxanthin loaded Pickering emulsion gel regulated by konjac glucomannan and κ-carrageenan

This study aimed to elaborate the combination effect of polysaccharides on physicochemical properties and in vitro digestive behavior of astaxanthin (AST)-loaded Pickering emulsion gel. AST-loaded Pickering emulsion gel was prepared by heating Pickering emulsion with konjac glucomannan (KGM) and κ-carrageenan (CRG). The microstructure revealed that adding the two polysaccharides resulted in Pickering emulsion forming a network structure. It exhibited a denser and more uniform network structure, enhancing its mechanical properties four times and increasing its water-holding capacity by 20 %. In vitro digestion experiments demonstrated that the release of free fatty acids from the Pickering emulsion gel (4.25 %) was notably lower than that from conventional Pickering emulsion (17.19 %), whereas AST bioaccessibility was remarkably low at 0.003 %. It provided a feasible strategy to regulate the bioaccessibility in Pickering emulsion, which has theoretical significance to guide the current eutrophic diet people.

Structure, chemical modification, and functional applications of mucilage from Mimosa pudica seeds - A review

Mimosa pudica (MP) is an ornamental plant due to seismonastic movements that close leaves and fall petioles in response to touch, wind, light, heat, cold, and vibration. The seeds of MP secrete smart, biocompatible, and non-toxic mucilage that has captivated researchers due to its widespread use in various fields such as pharmaceuticals and biotechnology. The mucilage is responsive to pH, salt solutions, and solvents and acts as a binder in tablet formulations for targeted drug delivery. The mucilage is chemically modifiable via acetylation, succinylation, and graft polymerization. Chemically modified MP mucilage appeared supersorbent for heavy metal ion uptake. Nanoparticles synthesized using mucilage as a reducing and capping agent displayed significant antimicrobial and wound-healing potential. Crosslinking of mucilage using citric acid as a crosslinking agent offers a sustained release of drugs. The present review is aimed to discuss extraction optimization, structure, modification, and the stimuli-responsive nature of mucilage. The review article will cover the potential of mucilage as emulsifying, suspending, bio-adhesive, gelling, and thickening agent. The role of mucilage as a capping and reducing agent for nanoparticles will also be discussed.

Development of interpenetrating network hydrogels: Enhancing the release and bioaccessibility of green tea polyphenols

Green Tea polyphenols (GTP) are important bioactive compounds with excellent physiological regulation functions. However, they are easily destroyed by the gastric environment during digestion. In this work, a sodium alginate (SA)-gellan gum (GG) interpenetrating network (IPN) hydrogel was synthesized to protect and delivery GTP. The ratio of SA/GG significantly affects the network structure of IPN hydrogels and the performance of delivering GTP. The hydrogel formed by interpenetrating 20 % GG with 80 % SA as the main network had the highest water uptake (55 g/g), holding capacity (950 mg/g), and freeze-thaw stability, with springiness reaching 0.933 and hardness reaching 1300 g, which due to the filling effect and non-covalent interaction. Rheological tests showed that the crosslink density of IPN hydrogel in SA-dominated network was improved by the addition of GG to make it better bound to GTP, and the higher water uptake meant that the system could absorb more GTP-containing solution. This IPN hydrogel maintained 917.3 mg/g encapsulation efficiency at the highest loading capacity (1080 mg/g) in tests as delivery system. In in vitro digestion simulations, owing to the pH responsiveness, the IPN hydrogel reduced the loss of GTP in gastric fluid, achieving a bioaccessibility of 71.6 % in the intestinal tract.

Development of 3D printed k-carrageenan-based gummy candies modified by fenugreek gum: Correlating 3D printing performance with sol-gel transition

Temperature-responsive inks were formulated using k-carrageenan, fenugreek gum (FG), rose extracts, and sugar, of which the first two were used as the gelling agents. The interactions among components in these mixed ink formulations were investigated. Sol-gel transition and rheological properties of these inks were also correlated with extrusion, shape formation, and self (shape)-supporting aspects of 3D printing. Results indicated that incorporating FG increased inks' gelation temperature from 39.7 °C to 44.7-49.6 °C, affecting the selection of printing temperature (e.g., 0 % FG: 40 °C, 0.15 % FG: 45 °C, 0.3 % FG-0.6 % FG: 50 °C). Inks in solution states with lower viscosity (<5 Pa·s) were amenable to ensure their smooth extrusion through the tip of the printing nozzle. A shorter sol-gel transition time (approximately 100 s) during the shape formation stage facilitated the solidification of inks after extrusion. The addition of FG significantly (p<0.05) improved the mechanical properties (elastic modulus, hardness, etc.) of the printed models, which facilitated their self-supporting behavior. Low field nuclear magnetic resonance indicated that the inclusion of FG progressively restricted water mobility, consequently reducing the water syneresis rate of the mixed inks by 0.86 %-3.6 %. FG enhanced hydrogen bonding interactions among the components of these mixed inks, and helped to form a denser network.

Towards superior biopolymer gels by enabling interpenetrating network structures: A review on types, applications, and gelation strategies

Gels derived from single networks of natural polymers (biopolymers) typically exhibit limited physical properties and thus have seen constrained applications in areas like food and medicine. In contrast, gels founded on a synergy of multiple biopolymers, specifically polysaccharides and proteins, with intricate interpenetrating polymer network (IPN) structures, represent a promising avenue for the creation of novel gel materials with significantly enhanced properties and combined advantages. This review begins with the scrutiny of newly devised IPN gels formed through a medley of polysaccharides and/or proteins, alongside an introduction of their practical applications in the realm of food, medicine, and environmentally friendly solutions. Finally, based on the fact that the IPN gelation process and mechanism are driven by different inducing factors entwined with a diverse amalgamation of polysaccharides and proteins, our survey underscores the potency of physical, chemical, and enzymatic triggers in orchestrating the construction of crosslinked networks within these biomacromolecules. In these mixed systems, each specific inducer aligns with distinct polysaccharides and proteins, culminating in the generation of semi-IPN or fully-IPN gels through the intricate interpenetration between single networks and polymer chains or between two networks, respectively. The resultant IPN gels stand as paragons of excellence, characterized by their homogeneity, dense network structures, superior textural properties (e.g., hardness, elasticity, adhesion, cohesion, and chewability), outstanding water-holding capacity, and heightened thermal stability, along with guaranteed biosafety (e.g., nontoxicity and biocompatibility) and biodegradability. Therefore, a judicious selection of polymer combinations allows for the development of IPN gels with customized functional properties, adept at meeting precise application requirements.

Mechanistic insights into the enhanced texture of potato noodles by incorporation of small granule starches

Potato noodles are a popular food due to their unique texture and taste, but native potato starch often fails to meet consumer demands for precise textural outcomes. The effect of blending small granule (waxy amaranth, non-waxy oat and quinoa) starch with potato starch on the properties of noodles was investigated to enhance quality of noodles. Morphological results demonstrated that small granule starch filled gaps between potato starch granules, some of which gelatinized incompletely. Meanwhile, XRD and FTIR analysis indicated that more ordered structures and hydrogen bonding among starch granules increased with addition of small granule starch. The addition of oat or quinoa starch increased gel elasticity, decreased viscosity of the pastes, and increased the tensile strength of noodles, while addition of 30 % and 45 % waxy amaranth starch did not increase G' value of gel or tensile strength of noodles. These results indicated that amylose molecules played an important role during retrogradation, and may intertwine and interact with each other to enhance the network structure of starch gel in potato starch blended with oat or quinoa starch. This study provides a natural way to modify potato starch for desirable textural properties of noodle product.

Effect and characterization of konjac glucomannan on xanthan gum/κ-carrageenan/agar system

A mixed polysaccharide system is an important strategy to improve the performance of a single polysaccharide. Herein, quaternary polysaccharide gels were prepared by konjac glucomannan (KGM), xanthan gum (XG), κ-carrageenan (κ-CA), and agar (AR). The effects of KGM were evaluated by combining water holding capacity (WHC), rheological analysis, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and texture profile analysis (TPA). More KGM gradually increased the springiness of the compounded gels. WHC increased and then decreased with the addition of KGM, performing best at KGM4 (KGM: κ-CA:XG:AR = 2:2:1:2). Rheological analysis showed that the compounded gels exhibited a pseudoplastic characteristic of shear thinning, KGM endowed the gel with a stronger shear thinning behavior and improved the solid-like nature of the gels at high temperatures. The thermal stability of the composite gel was improved by the participation of KGM. FTIR analysis showed that the interactions were mainly related to intermolecular hydrogen bonds and acetyl groups. The microscopic morphology of KGM4 was significantly continuous, smooth, and compact, exhibiting the best practical performance and taking the maximum advantage.

Effects of three different polysaccharides on the sol gel-behavior, rheological, and structural properties of tapioca starch

The sol-gel behavior of tapioca starch (TS) plays a crucial role in the processing and quality control of flour-based products. However, natural tapioca starch has low gel strength and poor viscosity, which tremendously limits its application. To solve this problem, this study investigated the effects of κ-carrageenan (KC), konjac gum (KGM), and Mesona chinensis Benth polysaccharide (MCP) on the pasting behavior, rheological, and structural properties of tapioca starch. KC, KGM, and MCP significantly increased the viscosity of TS. With the exception of high-concentration KGM (0.5 %), all other blending systems showed decrease in setback. This may be attributed to the stronger effect of the high-concentration KC (0.5 %) and MCP (0.5 %) functional groups interacting with starch. KC, KGM, and MCP effectively improved the dynamic modulus (G' and G") of TS gel and were effective in increasing the gel strength and hardness of TS. The FT-IR analysis indicated that the short-range order of TS was mainly influenced by polysaccharides through non-covalent bonding interactions. Furthermore, it was confirmed that three polysaccharides could form dense structures by hydrogen bonding with TS. Similarly, more stable structure and pore size were observed in the microstructure diagram.

Comprehensive investigation into the effects of yeast dietary fiber and temperature on konjac glucomannan/kappa-carrageenan for the development of fat analogs

In this study, yeast dietary fiber (YDF) was incorporated into konjac glucomannan/kappa-carrageenan (KGM/κ-KC) for the development of fat analogs, and the impact of YDF on the gelation properties and behavior of KGM/κ-KC composite gels was assessed. YDF improved the composite gel whiteness value, and affected the mechanical properties of the composite gel, especially enhancing its hardness, and decreasing its chewiness, elasticity, and gel strength, making it more similar to porcine back fat. When the yeast dietary fiber content was 0.033 g/mL and the heating temperature was 80 °C (T80-2), the textural properties of the composite gel were closest to porcine back fat. The frequency sweep results suggested that YDF incorporation led to enhancement of the intermolecular interaction and intermixing and interaction among more easily at higher processing temperatures (80 °C and 90 °C). By scanning electron microscopy, the fatty surface of porcine back fat was flat and covered with a large amount of oil, while KGM/κ-KC/YDF composite gels developed a dense, stacked network structure. YDF caused more fragmented, folded, and uneven structures to emerge. Overall, YDF could influence the gel behavior of KGM/κ-KC composite gels, and change their colors and mechanical properties. This work could serve as a guide for preparing fat analogs with KGM/κ-KC composite gels.

Sensory Evaluation of Plant-Based Meat: Bridging the Gap with Animal Meat, Challenges and Future Prospects

Globally, the demand for plant-based meat is increasing rapidly as these products are becoming quite popular among vegans and vegetarians. However, its development is still in the early stage and faces various technological challenges; the imitation of the sensory profile of meat is the most challenging part as these products are meant to be an alternative to animal meat. The development of a product similar to meat requires accurate selection of ingredients and processing techniques. An understanding of the relevant sensory profile can help in constructing products and technologies that are consumer-centric and sustainable. In this review, we focus on the comparative differences in the sensory profiles of animal meat and plant-based meat alternatives, particularly regarding the color, texture, and flavor, along with the methods used to compare them. This paper also explains the sensory evaluation and how it affects consumer preference and acceptability. Additionally, a direction for further research on developing better plant-based meat products is suggested.

Effect of the addition of mung bean, corn, and sweet potato starch on the properties of konjac gel

Konjac gel (KG) food is a popular choice among consumers due to its delicious taste, low-calorie content, and ability to provide satiety. The aim of the study was to evaluate the effects of the addition of mung bean starch (MBS), corn starch (CS), and sweet potato starch (SPS) on the water solubility, gel strength, microstructure, and viscosity of KG. The experimental results showed that MBS exhibited the largest amylose content (47.07 ± 1.71%), and SPS had the lowest amylose content (27.92 ± 1.24%). With the increase of starch concentration, the gel strength and viscosity of KG increased, the KG with 3% MBS had higher water solubility and stronger gel strength, and the KG with 3% SPS had better viscosity. In addition, according to the scanning electron microscope, the microstructure of KG without starch was a porous honeycomb, and the network structure of CS/KG was more orderly and uniform. The microstructure of MBS/KG was tightly wrinkled, while the honeycomb structure of SPS/KG was more orderly and the network outline was clearer. The addition of starch could improve the quality of KG, the type of starch used had different effects.

Improvement of kefir fermentation on rheological and microstructural properties of soy protein isolate gels

Soy protein isolate (SPI) has become a promising plant-based material as an animal protein products alternative. However, its application was limited due to the weak gelling properties. To investigate the effect of kefir fermentation on SPI gels properties, SPI-polysaccharide gels was produced by unfermented and kefir-fermented SPI using different concentration of KGM, chitosan, and calcium chloride in this study. Characterization of fermented SPI gels showed that fermentation by kefir grains can be applied to improve the textural strength, mechanical structure, and thermal characteristics of SPI gels. Compared to unfermented SPI gels, the water-holding capacity was remarkably enhanced to 63.11% and 65.71% in fermented SPI-chitosan gels. Moreover, the hardness of fermented SPI-KGM gels were significantly increased to 13.43 g and 27.11 g. And the cohesiveness and resilience of fermented-KGM gels were also improved than unfermented samples. Results of rheological characterization and thermogravimetric analysis revealed the strengthened mechanical features and higher thermal stability of fermented SPI gels. Additionally, the main role of hydrophobic interactions and secondary structure variations of SPI gels were demonstrated by intermolecular force measurements, Fourier-transform infrared spectroscopy, and X-ray diffraction. Moreover, the network structure was observed more compact and homogeneous performed by microstructural images in fermented SPI gels. Therefore, this research provided a novel approach combining multi-species fermentation with protein gelation to prepare SPI gel materials with improved nutrition and structural properties.

Food gels: principles, interaction mechanisms and its microstructure

Food hydrogels are important materials having great scientific interest due to biocompatibility, safety and environment-friendly characteristics. In the food industry, hydrogels are widely used due to their three-dimensional crosslinked networks. Furthermore, they have attracted great attention due to their wide range of applications in the food industry, such as fat replacers, encapsulating agents, target delivery vehicles, and many more. In addition to basic and recent knowledge on food hydrogels, this review exclusively focuses on sensorial perceptions, nutritional significance, body interactions, network structures, mechanical properties, and potential hydrogel applications in food and food-based matrices. Additionally, this review highlights the structural design of hydrogels, which provide the forward-looking idea for future applications of food hydrogels (e.g., 3D or 4D printing).

Physiochemical characteristics and sensory properties of plant protein isolates-konjac glucomannan compound gels

In this study, the effects of konjac glucomannan (KGM) at different concentrations on the physiochemical and sensory properties of soy protein isolate (SPI), pea protein isolate (PPI), or peanut protein isolate (PNPI) compound gels were investigated. The results revealed that when the ratio of PNPI to KGM was 90:10, the denaturation temperature of PNPI could be significantly enhanced to 119.32°C by KGM modification. Concerning the textural and microstructural features, the amount of KGM addition had positive correlation with the hardness and chewiness of each compound gel, however, too much KGM addition will cause the unstable internal structure of the PNPI/KGM compound gels (70:30 and 60:40). Furthermore, sensory results indicated that PNPI/KGM (80:20), PPI/KGM (80:20), SPI/KGM (80:20) had great potential to be considered as prototypes for novel plant-based products, which generated the highest acceptance scores of 5.04, 5.94, and 5.36 in each group, respectively.

Review of Konjac Glucomannan Structure, Properties, Gelation Mechanism, and Application in Medical Biology

Konjac glucomannan (KGM) is a naturally occurring macromolecular polysaccharide that exhibits remarkable film-forming and gel-forming properties, and a high degree of biocompatibility and biodegradability. The helical structure of KGM is maintained by the acetyl group, which plays a crucial role in preserving its structural integrity. Various degradation methods, including the topological structure, can enhance the stability of KGM and improve its biological activity. Recent research has focused on modifying KGM to enhance its properties, utilizing multi-scale simulation, mechanical experiments, and biosensor research. This review presents a comprehensive overview of the structure and properties of KGM, recent advancements in non-alkali thermally irreversible gel research, and its applications in biomedical materials and related areas of research. Additionally, this review outlines prospects for future KGM research, providing valuable research ideas for follow-up experiments.

Characterizations of konjac glucomannan/curdlan edible coatings and the preservation effect on cherry tomatoes

In this study, konjac glucomannan (KGM) and curdlan were used to fabricate composite coating (KC). The coating solutions were investigated using a rheological method, and the coatings were characterized by water solubility tests, water vapor permeability (WVP), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The preservation effect of KC coating on cherry tomatoes stored at room temperature was determined. Results indicated that the curdlan addition can adjust the hydrophilicity/hydrophobicity of KGM coatings. Curdlan addition enhanced intermolecular entanglement and film-forming property. Increasing curdlan content in KC coatings significantly decreased the moisture content, dissolution and swelling ratio, and WVP. The KGM-curdlan composites behaved as high-performance coatings with good compatibility and uniformity. The K₃C₂ coating showed the best uniformity, water barrier, and thermal stability. The application of K₃C₂ coating significantly reduced the weight loss, decay loss, and delayed the decreases of firmness, soluble solids, total acid, and VC contents of cherry tomatoes. The KGM/curdlan edible coatings have promising potential for prolonging the shelf life of cherry tomatoes and applications in fruits preservation in the future.

The alleviative effect of curdlan on the quality deterioration of konjac glucomannan thermo-irreversible gels after commercial sterilization at 121 °C

This work employed different curdlan concentrations (0.00 %, 1.00 %, 1.50 %, 2.00 %, and 2.50 %) to alleviate the quality degradation of konjac glucomannan (KGM) gels after commercial sterilization at 121 °C for 15 min. The results showed that all levels of curdlan could retard the deterioration of KGM gels, with the best effect at 2.00 %. After commercial sterilization, incorporating curdlan into KGM gels greatly reduced the Tan σ (G"/ G'), total relaxation time and half-free water from 0.52, 89.85 ms and 98.26 % to 0.27, 38.48 ms and 21.42 %, respectively. Moreover, the addition of curdlan imparted a better texture to KGM gels, as reflected in the increase of hardness, springiness, water-holding capacity and whiteness value from 1400.85 g, 0.42, 87.92 % and 33.33 to 3461.68 g, 0.80, 96.50 % and 49.27, respectively. Furthermore, SEM images revealed that curdlan endowed KGM gels with a tighter structure and smaller pores, and the pore size distribution was reduced from 113.46 μm to17.91 μm, indicating a stronger interaction among molecules, as evidenced by XRD and FTIR results. KGM gels with curdlan possessed less proportion of complete crystallites and crystalline region. These findings suggested that curdlan can be the potently protectant for improving the quality of commercially sterilized KGM gel-based products.

Effects of Abelmoschus manihot gum content, heating temperature and salt ions on the texture and rheology properties of konjac gum/Abelmoschus manihot gum composite gel

To improve the gelling property of konjac gum (KGM) and enhance the application value of Abelmoschus manihot (L.) medic gum (AMG), a novel type of gel was prepared using KGM and AMG in this study. The effects of AMG content, heating temperature and salt ions on the characteristics of KGM/AMG composite gels were studied by Fourier transform infrared spectroscopy (FTIR), zeta potential, texture analysis and dynamic rheological behavior analysis. The results indicated that the AMG content, heating temperature and salt ions could affect the gel strength of KGM/AMG composite gels. Hardness, springiness, resilience, G', G* and η* of KGM/AMG composite gels increased when AMG content increased from 0 to 2.0 %, but they decreased when AMG increased from 2.0 % to 3.5 %. High-temperature treatment significantly enhanced the texture and rheological properties of KGM/AMG composite gels. The addition of salt ions reduced the zeta potential absolute value and weakened the texture and rheological properties of KGM/AMG composite gels. Furthermore, the KGM/AMG composite gels could be classified as non-covalent gels. The non-covalent linkages included hydrogen bonding and electrostatic interactions. These findings would help understand the properties and formation mechanism of KGM/AMG composite gels and help improve the application value of KGM and AMG.

Development of flaxseed gum/konjac glucomannan with agar as gelling agents with enhanced elastic properties

In this study, a natural-based gelling agent comprised of blended flax seed gum (FSG), konjac glucomannan (KG), and agar gel (AG) was developed for application to control the textural properties of foods. The compound gels, including FSG, KG, and AG, were investigated to determine their moisture affinity, including minimum gelling concentration, water binding capacity, water soluble index, and swelling power. In addition, we analyzed the rheological properties of the compound gel through texture analysis, frequency sweep, and creep and recovery. The microstructure of the compound gel was identified and compared with the viscoelastic properties of the gel. Overall, these results showed that the F4K6 (4:6:2 of FSG:KG:AG) could serve as an excellent gelling agent, which endowed food gel with the promoted elastic properties, water capacity, and rigid surface morphology. This work suggests that novel gelling agents, including FSG, KGM, and AG, successfully prepared food gels with improved physicochemical properties.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-022-01179-9.

A Comprehensive Review of Food Hydrogels: Principles, Formation Mechanisms, Microstructure, and Its Applications

Food hydrogels are effective materials of great interest to scientists because they are safe and beneficial to the environment. Hydrogels are widely used in the food industry due to their three-dimensional crosslinked networks. They have also attracted a considerable amount of attention because they can be used in many different ways in the food industry, for example, as fat replacers, target delivery vehicles, encapsulating agents, etc. Gels-particularly proteins and polysaccharides-have attracted the attention of food scientists due to their excellent biocompatibility, biodegradability, nutritional properties, and edibility. Thus, this review is focused on the nutritional importance, microstructure, mechanical characteristics, and food hydrogel applications of gels. This review also focuses on the structural configuration of hydrogels, which implies future potential applications in the food industry. The findings of this review confirm the application of different plant- and animal-based polysaccharide and protein sources as gelling agents. Gel network structure is improved by incorporating polysaccharides for encapsulation of bioactive compounds. Different hydrogel-based formulations are widely used for the encapsulation of bioactive compounds, food texture perception, risk monitoring, and food packaging applications.

Utilization of Bioflocculants from Flaxseed Gum and Fenugreek Gum for the Removal of Arsenicals from Water

Mucilage-based flocculants are an alternative to synthetic flocculants and their use in sustainable water treatment relates to their non-toxic and biodegradable nature. Mucilage extracted from flaxseed (FSG) and fenugreek seed (FGG) was evaluated as natural flocculants in a coagulation-flocculation (CF) process for arsenic removal, and were compared against a commercial xanthan gum (XG). Mucilage materials were characterized by spectroscopy (FT-IR, ¹³C NMR), point-of-zero charge (pH_pzc) and thermogravimetric analysis (TGA). Box-Behnken design (BBD) with response surface methodology (RSM) was used to determine optimal conditions for arsenic removal for the CF process for three independent variables: coagulant dosage, flocculant dosage and settling time. Two anionic systems were tested: S1, roxarsone (organic arsenate 50 mg L^-1) at pH 7 and S2 inorganic arsenate (inorganic arsenate 50 mg L^-1) at pH 7.5. Variable arsenic removal (RE, %) was achieved: 92.0 (S1-FSG), 92.3 (S1-FGG), 92.8 (S1-XG), 77.0 (S2-FSG), 69.6 (S2-FGG) and 70.6 (S2-XG) based on the BBD optimization. An in situ kinetic method was used to investigate arsenic removal, where the pseudo-first-order model accounts for the kinetic process. The FSG and FGG materials offer a sustainable alternative for the controlled removal of arsenic in water using a facile CF treatment process with good efficiency, as compared with a commercial xanthan gum.

Aggregation of konjac glucomannan by ethanol under low-alkali treatment

•

Microstructure of KGM alcogels is distinct from that of normal KGM gels.

•

Gel network of EAK_gel is more heterogeneous than that of EK_gel.

•

Ethanol arranges the aggregation of deacetylated KGM chains.

•

Both structure and function of KGM aggregates are altered by ethanol and alkali.

•

Solvent quality deterioration drives the formation of low-alkali KGM alcogels.

Utilizing ethanol in konjac glucomannan (KGM) gelation has important food processing applications. Typically, ethanol positively impacts the formation of low-alkali KGM gels and dramatically changes their physical properties, but the role of ethanol on the aggregation of KGM chains and the resultant gelation is less well understood. This study presents the distinct microstructures of low-alkali KGM gels incorporating ethanol. The fibril diameter and mesh size were determined to be 262.3 ± 22.3 nm and 2.680 ± 0.035 μm in average, contributing to a higher degree of anisotropy of such a gel network. Ethanol favors intermolecular aggregation by increasing the R_g of small-sized aggregates to 2.10 nm. The FTIR and temperature-cycled rheological studies suggest there are hydrophobic interactions stabilizing the gel network with the assistance of hydrogen bonds. The spatial confinement of deacetylated KGM chains as the solvent quality deteriorates by incorporating ethanol may arrange the aggregation and induce the structural reorganization in gel formation.

Investigation on the influence of AC electric filed and KCl on the structure and gel properties of Konjac glucomannan

The influence of alternating current (AC) electric field and KCl on the structure and gel properties of Konjac Glucomannan (KGM) were studied in this work by high-performance gel permeation chromatography (HPGPC), acid-base titration, solid-state nuclear magnetic resonance (NMR), X-ray diffraction (XRD), simultaneous differential scanning calorimetry/thermo gravimetric analyzer (DSC/TGA) and a rheometer. HPGPC showed KGM was degraded by AC electric field and Acid-base titration showed that under the action of AC electric field and KCl KGM removed part of acetyl groups, which were consistent with the analysis of NMR. XRD and temperature sweep measurements respectively showed that the electrotreatment time and KCl concentration had important effects on the gel formation and its three-dimensional network. Simultaneous DSC/TGA and temperature sweep measurements both demonstrated the gel had good thermal stability.

Structural Characterization and Functional Properties of Flaxseed Hydrocolloids and Their Application

Flaxseed is an excellent source of valuable nutrients and is also considered a functional food. There are two types of hydrocolloids in flaxseed: flaxseed gum and proteins. Flaxseed gum exhibits emulsifying and foaming activities or can be used as a thickening and gelling agent. Due to its form of soluble fiber, flaxseed gum is related to many health benefits. Flaxseed proteins have various functional properties based on their physicochemical properties. While albumins possess the emulsion-forming ability, globulins better serve as foaming agents. Flaxseed proteins may also serve as a source of functional peptides with interesting biological and health-related activities. Functional properties and health-related benefits predetermine the application of these hydrocolloids, mainly in the food industry or medicine. Although these properties of flaxseed hydrocolloids have been recently and extensively studied, they are still not widely used on the industrial scale compared to other popular plant gums and proteins. The aim of this review was to present, discuss and highlight the recent discoveries in the structural characteristics and functional and biological properties of these versatile hydrocolloids with respect to factors affecting their characteristics and offer new insights into their potential applications as comparable alternatives to the other natural hydrocolloids or as the sources of novel functional products.

The improvement of texture properties and storage stability for kappa carrageenan in developing vegan gummy candies

BACKGROUND

As plant-based foods have become more mainstream in recent years, carrageenan has been used to replace animal-derived gelatin in confectionery products. However, texture defects and water seepage during storage limit the development of kappa carrageenan (KC) gummy candies.

RESULTS

This study evaluated the effects of hydrocolloids on the texture properties and storage stability of KC gummy candies. The results showed that 4 g kg^-1 carboxymethylcellulose (CMC) composited with 20 g kg^-1 KC formed a flexible gummy candy with low fragility and limited water seepage during storage. Further investigation revealed that 4 g kg^-1 CMC promoted side-by-side intermolecular aggregation of KC helices through hydrogen bonding, which stabilized a denser network structure compared to the pure KC hydrogel. However, high CMC proportions (8-12 g kg^-1 ) led to electrostatic repulsion that dominated in the system, inhibiting the gel-forming process and thus resulting in a weak gel structure with accelerated syneresis.

CONCLUSION

This study found that 4 g kg^-1 CMC was able to improve the flexibility and decrease unacceptable fragility of KC gummy candies, with water seepage decreased during storage significantly. It provided preliminary evidence for utilizing hydrocolloids to adjust texture and control water migration in KC gels, and has potential to promote wide development of vegan gummy candies. © 2021 Society of Chemical Industry.

Development of β-Cyclodextrin/Konjac-Based Emulsion Gel for a Pork Backfat Substitute in Emulsion-Type Sausage

Emulsion gel has been used to replace animal fats in meat products. Konjac is a widely used gelling agent; however, its low emulsion stability limits its use in meat products. This study aimed to examine the quality characteristics of β-cyclodextrin (CD)-supplemented konjac-based emulsion gel (KEG) (CD-KEG) and its application as a fat substitute in emulsion-type sausages. The supplementation of CD increased hydrogen bonds and hydrophobic interactions with konjac and oil in the gels, respectively. Additionally, CD increased the structural complexity and strength of KEG. Since adding more than 6% of CD to KEG did not increase the gel strength, 6% CD-added KEG was adopted to substitute for pork backfat in manufacturing low-fat emulsion-type sausages. The following formulations of the sausages were prepared: pork backfat 20% (PF20); pork backfat 10% + KEG 10% (KEG10); KEG 20% (KEG20); pork backfat 10% + CD-KEG 10% (CD-KEG10); CD-KEG 20% (CD-KEG20); and pork backfat 5% (PF5). The CD-KEG20 formulation exhibited higher viscosity and viscoelasticity than KEG20, which suggested that CD improves the rheological properties and the thermal stability of meat batter. Additionally, CD-KEG20 showed similar emulsion stability, cooking yield and texture parameters compared with PF20. Therefore, 6% CD-added KEG is a suitable fat substitute for preparing low-fat emulsion-type sausages.

Construction of Artemisia sphaerocephala Krasch. Polysaccharide based hydrogel complexed with pullulan and gelatin crosslinked by ferric ions

Artemisia sphaerocephala Krasch. polysaccharide (ASKP) was found to be crosslinked with ferric ions to form hydrogels in the previous study. In this work, it was demonstrated that ASKP-Fe³⁺ hydrogel complexed with pullulan or gelatin contributed to a significantly enhanced gel strength at 1.5% ASKP, 60 mM Fe²⁺, pH 4.0, and the mixing ratio of 9: 1. The complexed hydrogels presented a dense semi-interpenetrating network along with the delay of gelation time and the increase of water retention. ASKP based complexes exhibited good compatibility, probably because pullulan and gelatin could be entangled with ASKP chain under hydrogen bonding and electrostatic interaction, respectively. The interaction between ASKP and pullulan or gelatin contributed to the formation of complexed hydrogels with dense network and significantly enhanced gel strength. It is inferred that ASKP would have great potential to be a new gelling material as well as for the ferric ions delivery.

Construction of Konjac Glucomannan/Oxidized Hyaluronic Acid Hydrogels for Controlled Drug Release

Konjac glucomannan (KGM) hydrogel has favorable gel-forming abilities, but its insufficient swelling capacity and poor control release characteristics limit its application. Therefore, in this study, oxidized hyaluronic acid (OHA) was used to improve the properties of KGM hydrogel. The influence of OHA on the structure and properties of KGM hydrogels was evaluated. The results show that the swelling capacity and rheological properties of the composite hydrogels increased with OHA concentration, which might be attributed to the hydrogen bond between the KGM and OHA, resulting in a compact three-dimensional gel network structure. Furthermore, epigallocatechin gallate (EGCG) was efficiently loaded into the KGM/OHA composite hydrogels and liberated in a sustained pattern. The cumulative EGCG release rate of the KGM/OHA hydrogels was enhanced by the increasing addition of OHA. The results show that the release rate of composite hydrogel can be controlled by the content of OHA. These results suggest that OHA has the potential to improve the properties and control release characteristics of KGM hydrogels.

Effects of two contrasting dietary polysaccharides and tannic acid on the digestive and physicochemical properties of wheat starch

In this study, konjac glucomannan, κ-carrageenan, and tannic acid were selected to study the effects of different combinations on the in vitro digestibility and physicochemical properties of wheat starch. Results showed that the addition of konjac glucomannan, κ-carrageenan, and tannic acid could decrease the digestion of starch and increase the content of resistant starch. Besides, the two polysaccharides weakened the extent of tannic acid on starch digestion. Moreover, although the two polysaccharides had different effects on the in vitro digestion of starch, they had no significant increase in the content of resistant starch. DSC and XRD results demonstrated that the polysaccharides and tannic acid showed synergistic effects on the rebuilding of starch microstructure. FTIR results further manifested that κ-carrageenan and konjac glucomannan could significantly increase the strength of hydrogen bonds in starch. At the same time, the addition of tannic acid would weaken the molecular interaction between polysaccharides and starch. SEM and CLSM results showed that tannic acid added to the polysaccharide-starch mixture not only interacted with starch but also influenced the structure of polysaccharide gel.

Elastic gels based on flaxseed gum with konjac glucomannan and agar

In this study, we prepared hydrocolloid gels in which flaxseed gum (FSG), konjac glucomannan (KGM), and agar (AG) were blended in different ratios for use as a viscoelastic food. The prepared hydrogels' physicochemical properties were analyzed concerning their water solubility index (WSI), swelling power (SL), frequency sweep results, and microstructures. As the FSG ratio decreased, the WSI value of the compound gel tended to increase. However, it showed a tendency to have a relatively high SP value and a low tan δ value according to a specific KGM/FSG/AG mixing ratios (8:2:1.5 and 6:4:1.5). Through microstructure analysis, the FKA821.5 sample showed a relatively small, monodispersed gel building structure, correlated with the rheological results. In conclusion, the FKA821.5 gel was determined to have good water retention capacity and high structural strength. These results are expected to increase the applicability of FSG-based gelling agents in the food industry.

Modulating storage stability of binary gel by adjusting the ratios of starch and kappa-carrageenan

This study aimed to investigate the interaction mechanism of the waxy starch and kappa carrageenan (KC) gel with different ratios during co-gelatinization and storage. Water distributions, mobilities and rheological properties of the mixture gels were studied. When KC concentration was low (0.5%KC and 4% starch), the starch dominated the system, and the gel strength was the lowest. When KC concentration increased to 0.75%, the gel had the lowest change rate of fracture force, and the most homogeneous network of the freeze-dried gel was observed. When KC concentration increased to 1.0%, the gel strength was high, but the uneven structure led to the instability of the gel. Overall, the gel with 0.75%KC and 4% starch was the most stable during storage, and the exclusion of the two components to each other was the weakest, resulting in the uniform structure of the gel.

Preparation and characterization of konjac glucomannan and gum arabic composite gel

Compounding is a safe method to avoid limitations of a singular gel. Here, composite gels were prepared with konjac glucomannan (KGM) and gum arabic (GA) and evaluated by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), water solubility index (WSI), water absorption index (WAI), texture profile analysis (TPA) and rheological analysis. The gel stratified when GA concentration ≥ 2.5%. FTIR indicated that the interactions of KGM and GA were mainly related to hydrogen bonds and acetyl groups, and the solution separated from gels only included GA and water molecules. The microstructures became denser and contained smaller holes at high GA concentrations as seen by SEM. WSI and WAI both increased with GA increasing. Hardness and springiness dropped when GA concentration increased from 0 to 2.0%, but they increased when GA increased from 2.0% to 4.0%. Rheological analysis showed the gels were non-Newtonian pseudoplastic fluids, with anti-thixotropy (GA ≤ 3.5%) and thixotropy (GA ≥ 4.0%). Furthermore, the gels could be classified as non-covalent gels, with higher gel strength at high GA concentrations. The non-covalent linkages included hydrogen bonding and hydrophobic interaction, and hydrogen bonding held the dominated status. Therefore, KGM and GA have antagonistic and synergistic effects.

Effects of three different mannans on obesity and gut microbiota in high-fat diet-fed C57BL/6J mice

To compare the effects of three mannans, Konjac glucomannan (KGM), guar gum (GG) and locust bean gum (LBG), on obesity and obesity-related metabolic disorders in mice fed with high-fat diet (HFD), and to investigate the potential modulation of gut microbiota, we performed a 14 week study on C57BL/6J mice fed a HFD with/without mannan supplementation. The results showed that supplementing 8% KGM, GG, and LBG to a HFD dramatically reduced the body weight gain and adipose accumulation, attenuated liver injury, and antagonized glycolipid metabolism and inflammation-related parameters of HFD-fed mice in different degrees. However, only LBG had such roles when the supplement dose was reduced to 2%. In addition, it was found that LBG required more time to exert its impacts on weight control and lipid metabolism. Furthermore, 16S rRNA gene sequencing of gut microbiota indicated that mannans with different structures and supplement doses affected the overall structure of the gut microbiota to a varying extent and specifically changed the abundance of some OTUs. Moreover, several OTUs belonging to the genera Muribaculum, Staphylococcus, [Eubacterium] fissicatena group, and Christensenella had a high correlation with obesity and obesity-related metabolic disorders of the host. In summary, all the three mannans had the potential to be used as alternative dietary supplements or functional foods to prevent obesity and obesity-related metabolic disorders induced by a HFD, but the effects of the dose and time varied, and the functions of the mannans were associated with their ability to regulate the gut microbiota.

Comparison of physicochemical properties of β-glucans extracted from hull-less barley bran by different methods

In this study, four extraction methods, including ultrasonic extraction (UE), hot water extraction (HWE), microwave extraction (ME), and microwave-assisted ultrasonic extraction (MUE) were utilized to extract β-glucan from hull-less barley bran. Extraction yields and physicochemical properties of β-glucans extracted by different methods were investigated. The MUE displayed a highest extraction yield (2.16%) within shorter extraction time. Besides, β-glucans extracted by MUE (MUE-G) had higher number-average molecular weight (M_n) (3.415 × 10⁵), whereas β-glucans extracted by UE (UE-G) showed lower M_n (2.257 × 10⁵) as compared to other methods. Accordingly, apparent viscosity of MUE-G was highest, while water solubility index of UE-G was highest (34.18-88.81%) at tested temperature ranges (25-95 °C). The MUE-G shower stronger foam stability and emulsifying properties and weaker foaming capability, while UE-G exhibited stronger foaming capability. The foaming capability and emulsifying properties of β-glucan products were better in neutral solutions (pH = 7) than in the acidic (pH = 4) and alkaline (pH = 9).

Textural and structural properties of a κ-carrageenan-konjac gum mixed gel: effects of κ-carrageenan concentration, mixing ratio, sucrose and Ca2+ concentrations and its application in milk pudding

BACKGROUND

Mixtures of carrageenan and konjac gum are useful for specific applications in gel-based foods. Focusing on the changes of textural and structural properties, the effects of κ-carrageenan and konjac ratio and sucrose and Ca²⁺ concentrations on mixed gels were studied in this research. Furthermore, application of κ-carrageenan-konjac gum mixed gel to milk puddings was investigated.

RESULTS

There was a better synergistic effect when the ratio of κ-carrageenan and konjac was 7:3. The mixed gel containing 10 g kg^-1 κ-carrageenan-konjac gum was characterized by higher hardness, chewiness, adhesiveness and resilience and denser network structure. Besides, the addition of 5-10 wt% sucrose or 0.02 wt% Ca²⁺ could enhance the hardness, chewiness and adhesiveness of the mixed gel, as well as affording a denser network structure. For milk pudding, moderate hardness, chewiness and resilience could be obtained by adding 1.5 g kg^-1 κ-carrageenan-konjac gum mixture.

CONCLUSIONS

This research provides useful information for the formation of κ-carrageenan-konjac gum gel and its application in milk pudding. © 2020 Society of Chemical Industry.

Evaluation of cooking performance, structural properties, storage stability and shelf life prediction of high-moisture wet starch noodles

Cooking performance, micro- and molecular structure, storage stability and shelf-life prediction of high-moisture wet starch noodles (SN) were investigated. SEM images revealed that compared to dried SN, cooked wet SN had more evenly honeycomb-like network with smaller size of pores, indicating stronger interaction among molecules and causing favorable cooking performance. XRD and ATR-FTIR results evidenced that wet SN contained more complete crystallites and higher proportion of crystalline region. During storage, the quality decay of wet SN was mainly associated to the increment of total aerobic viable count (TAVC), titrable acidity and amylase, as well as the decreased textural hardness, overall acceptability and lightness. Based on TAVC, titrable acidity and overall acceptability, predicted shelf-life of vacuum-packed wet SN at 25 °C was 15.31, 21.54 and 16.65 weeks respectively, with relative error all within 20%, proving that the validated model could be an effective tool for monitoring the shelf-life of wet SN.